Solar Energy Materials and Solar Cells

Article	Citations
Defect detection in III-V multijunction solar cells using reverse-bias stress tests	245
Influence of carbon incorporation on PECVD-deposited n+ polycrystalline silicon passivating contacts for high-efficiency solar cells	195
Green picosecond pulsed laser-induced front poly-Si finger patterning for rear-junction double-sided Poly-Si passivated contact solar cells	192
Narrow bandgap photovoltaic cells	177
Editorial Board	173
Improved Auger recombination models: Consequences for c-Si solar cells	164
Corrigendum to “Inaccuracies in contact resistivity from the Cox–Strack method: A review” [Sol. Energy Mater. Sol. Cells 246 (2022) 111909]	144
Measurement of poly-Si film thickness on textured surfaces by X-ray diffraction in poly-Si/SiO passivating contacts for monocrystalline Si solar cells	141
Pyrrole-based viologen derivatives with high contrast and magenta color for electrochromic-fluorescent devices	136
Influence of the annealing temperature of (n) poly-Si/SiOx passivating contacts on their firing stability	113
Surface defect passivation by copper incorporation for efficient perovskite solar cells	111
VO2:Ge based thermochromic solar absorber coatings	110
High efficiency stable planar perovskite solar cells via heavy water additive	106
Design, development and analysis of large-area industrial silicon solar cells featuring a full area polysilicon based passivating contact on the rear and selective passivating contacts on the front	101
Alternative low-power plasma-sprayed inconel 625 coatings for thermal solar receivers: Effects of high temperature exposure on adhesion and solar absorptivity	101
Optical performance of a solar dish concentrator formed by the same size mirror located on parabolic frame	87
A novel phase change materials used for direct photothermal conversion and efficient thermal storage	86
Sub-ambient radiative cooling under tropical climate using highly reflective polymeric coating	83
New frontiers in thermal energy storage: An experimental analysis of thermophysical properties and thermal stability of a novel ternary chloride molten salt	82
Improving the performance of industrial TOPCon solar cells through the insertion of intrinsic a-Si layer	82
The differences between the hydrogenation by means of photon-injection and electron-injection for N-type tunnel oxide passivated contacts solar cells	79
Preparation and optimization of all-inorganic CdSe/ZnTe solar cells	79
Characterization and performance analysis of SrCl2 impregnated activated alumina composites for solar thermal energy storage	73
Synergistic engineering of back interface and bulk defects via Mo:Na layer incorporation for efficient directly sputtered Cu(In,Ga)Se2 solar cells	73
Corrosion mechanism of NiCrMoNb model alloy and NiCoFeCrMoNb high entropy alloy in molten solar salt at 600 °C	72

A comprehensive study on ZnSnN2-based solar cells with different Cu-based delafossite as buffer layers: A numerical analysis using SCAPS-1D	71
Optical characterization of alumina darkened with boron carbide inclusions for solar energy applications	69
Effect of UV irradiation on SiNx anti-reflective coating and silicon-based materials	68
Hybridising photovoltaics and thermoelectrics: A detailed-balance analysis	66
Effects of complexing agent on carrier transport property and photovoltaic performance of TiO2@MAPbI3 core-shell structured nanowire arrays	64
Integration of thin n-type nc-Si:H layers in the window-multilayer stack of heterojunction solar cells	60
Polyamide 6-Al2O3 nanoparticle composite nanofiber membranes with high solar reflectivity and human radiation transmittance for passive human body cooling	60
Balance of efficiency and stability of silicon heterojunction solar cells	60
ZIF-derived carbon/BN/CMF composite PCM for enhanced latent thermal storage, photothermal conversion, and thermal insulation	59
Evaluation of the resistance of halide perovskite solar cells to high energy proton irradiation for space applications	59
Effects of CuAlO2 on the heterojunction interface and performance of Cu2ZnSn(S,Se)4 thin-film solar cells	58
Effects and mechanisms of argon flow rate on the quality of cast multicrystalline silicon	58
Enhanced optical properties and light-to-heat conversion performance of Ti3C2/[BMIM]BF4 nanofluids based direct absorption solar collector	57
Improving the efficiency of Cu2ZnSn(S,Se)4 solar cell by using localized K-doped precursor film	57
Sustainable silver recovery by chemical treatment of metal rich fines from solar panel waste	56
Experimental enhancement study of thermophysical properties of ternary carbonate phase change material with multi-dimensional nanoparticles	56
Corrosion behavior of alloys in Li2CO3-K2CO3 eutectic salt under an Air-then-Argon condition	56
Characterization, experimental study and optimization of the performance of photovoltaic panel integrated with form-stable phase change materials and conductive ZnO/MnO2 nanoparticles	56
Impact of temperature on corrosion behavior of austenitic stainless steels in solar salt for CSP application: An electrochemical study	55
Tunable thermal management based on solar heating and radiative cooling	54
4E assessment and optimization of conical solar still performance: A study on innovative dual-tray basins combined with truncated conical external reflectors	54
CQD-ATO hybrid nanofluid with good stability in the application of spectral beam splitters	54
A visible-to-infrared broadband all-solid-state electrochromic device based Li4Ti5O12/WO3 for optical and thermal management	53
High performance electrochromic energy storage devices based on Mo-doped crystalline/amorphous WO3 core-shell structures	53
Influence of In2O3:SnO2 films at different sputtering power on efficiency and stability of heterojunction solar cells	53
Progress of phase change materials in solar water desalination system: A review	52
Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit	51
Parametric analysis of empirical parameters and solar radiation uniformity on the thermal performance of porous volumetric solar receivers	51
Thermophotovoltaic conversion efficiency measurement at high view factors	51
Hierarchically designed radiative cooling glass with enhanced thermal emittance by moisture capillary condensation	50
Enhanced adhesion strength of copper metallization on silicon heterojunction solar cell due to improved electrochemical reduction uniformity of ITO	50
Layer-separated treatment accelerating growth of P-type hydrogenated nanocrystalline silicon in SHJ cells	50
TiO2/Se heterojunction photovoltaic device made from Se/Te/Se stacked precursor	50
Corrosion of iron–nickel–chromium alloys in high temperature carbonate salt under argon atmosphere	49
Silicon surface texturing via TBAB-SDS composite additives enhanced copper-assisted chemical etching	49
A multimodal analysis of degradation processes in 10W PV panels under thermal and mechanical stress	49
The impact of surface polarisation on the degradation of tunnel oxide passivating contacts in silicon solar cells	49
The SrCO3/SrO system for thermochemical energy storage at ultra-high temperature	48
Active W-VO2-based Kirigami-structured films with digital control for energy efficient smart window	48
Effect of metal impurities concentration on electrical properties in N-type Recharged-Czochralski silicon	48
Cold atmospheric pressure plasma-assisted aerosol deposition of multi-colored dual band electrochromic VOxCyNz thin films	48
Influence of unintentional H2O introduction in sputtering chamber on ITO films and HJT solar cells	48
CdS(In)/CZTSSe bandgap alignment engineering for performance enhancement of solar cells without ZnO layer	48
Interplay between Li and Na amid co-doped solution-processed Cu2ZnSn(S,Se)4 absorbers for solar cells	47
Observations of contact resistance in TOPCon and PERC solar cells	47
Nearly perfect absorption of solar energy by coherent of electric and magnetic polaritons	47
Easily scaled-up and portable 3D polysulfone hollow fiber membrane tree for high-efficient solar-driven clean water production	46
A new configuration of V-trough concentrator for achieving improved concentration ratio of >3.0x	45
Luminescent coupling and efficiency of bifacial GaAs/Si tandem solar cells	45
Back interface engineering by 2D layered N–Ti3C2 in low-cost carbon based all-inorganic hole transport layer free perovskite solar cells	45

High-efficiency acidic electrocatalytic hydrogen evolution enhanced by encapsulation of heterojunction CoP–MoP nanoparticles in a nitrogen-doped 3D nanocarbon framework	45
Editorial Board	45
Editorial Board	45
C-276 nickel alloy corrosion in eutectic Na2CO3/NaCl molten salt under isothermal and thermal cycling conditions	45
Universal measure of photon collection efficiency of dye luminescent solar concentrators	44
Improving loading of CdS/CdSe co-sensitized quantum dots to enhance the performance of solar cells by voltage-assisted SILAR deposition	44
Effective thermal conductivity and thermal cycling stability of solid particles for sCO2 CSP applications	44
Polarization controllable colored radiative cooler based on photonic metamaterial	44
High performance low-bandgap (0.8 eV) single junction GaInNAsSb solar cells incorporating Au-based back surface reflectors	43
High-performance carbon-based all-inorganic CsPbI2Br perovskite solar cells via ethylammonium iodide and phenethylammonium iodide synergistic passivation	43
Correlation study between LeTID defect density, hydrogen and firing profile in Ga-doped crystalline silicon	43
Incorporation of nano-features into surface photoactive arrays for broadband absorption of the solar radiation	43
Accelerated reliability tests of n+ and p+ poly-Si passivated contacts	42
Minimizing electro-optical losses of ITO layers for monolithic perovskite silicon tandem solar cells	42
Inaccuracies in contact resistivity from the Cox–Strack method: A review	42
Celebration of life for Prof. Michael Hutchins	41
Controllable preparation method and thermal properties of composite phase change materials based on starch pore formation	41
Characterisation of striations in n-type silicon wafer processed with polysilicon contacts	41
Corrosion effects in bifacial crystalline silicon PV modules; interactions between metallization and encapsulation	41
A coupled optical-thermal-fluid-structural analysis of parabolic trough solar collector by deformation coupling instant ray-tracing multiple iteration method	41
The effect of storage conditions on the long-term stability of ethylene-vinyl-acetate (EVA) copolymer used in glass/glass modules	41
Mitigating contaminant-induced surface degradation in TOPCon solar cells: Mechanisms, impacts, and mitigation	41
Emerging PEG/VO2 dual phase change materials for thermal energy storage	40
Alleviating contaminant-induced degradation of TOPCon solar cells with copper plating	40
Fabrication and properties of nanoencapsulated stearic acid phase change materials with Ag shell for solar energy storage	40
Bamboo derived SiC ceramics-phase change composites for efficient, rapid, and compact solar thermal energy storage	40
Design optimization of solar collectors with hybrid nanofluids: An integrated ansys and machine learning study	40
Using binary-eutectic phase change materials and ZnO/aluminum nitride nanofillers to improve photovoltaic efficiency	39
Molten chloride salt technology for next-generation CSP plants: Selection of cold tank structural material utilizing corrosion control at 500 °C	39
Oil-in-Oil emulsions of stearic acid dispersed in silicone oil with enhanced energy storage capability for heat transfer fluids	39
Effectively synthesized plasmonic-magnetic Ag@Fe3O4 selective absorbing nanofluid for spectral beam splitting in full spectrum utilization	39
Dynamic hot corrosion behavior of austenitic stainless steels in binary nitrate-carbonate molten salts at 600°C	39
Advanced simulation and design of two-terminal selenium/antimony selenosulfide tandem solar cells	38
Electrochromic nickel-oxide-based thin films in KOH electrolyte: Ionic and electronic effects elucidated by impedance spectroscopy	38
Editorial Board	38
Sb doped Al-Si/AlN composite phase change material with improved thermal conductivity and reliability	38
Light induced degradation of CIGS solar cells	38
Temperature dependency of the optical properties of photovoltaic module component layers	37
Unveiling the NIR modulation performance enhancement of VO2 endowed by oxygen vacancy elimination	37
Enhancing reactivity of Na2Zn(SO4)2 hydrates by doping for thermochemical energy storage	37
Electric-field-induced aging dynamics of triple-cation lead iodide perovskite at nanoscale	37
Atom layer deposited TiO2 electron transport layer for silicon heterojunction solar cells to achieve high performance	37
Design and optimization of infrared radiation barrier using omnidirectional reflectors	37
Neodymium oxide electron-selective contact for crystalline silicon solar cells	37
Improved charge separation by anatase TiO2 nanorod arrays for efficient solid-state PbS quantum-dot-sensitized solar cells	36
Theoretical design and experimental study a novel direct Z-scheme V2O5/C3N5 heterojunction for efficient photocatalytic hydrogen production	36
Editorial Board	36
Cr–Mn-diffusion coatings on VM12: In situ spinel formation with high solar absorptance for concentrated solar plants	36
Exploring the impact of nanostructures on specific heat in nanoparticle-doped carbonate salts via MD simulations	36
Exploring Sm2NiMnO6 as a lead-free absorber for perovskite solar cells: Insights from theoretical and experimental approaches	36
Evaluation of the energy flow characteristics and efficiency of photothermal functional phase change materials for efficient solar thermal harvesting	35
Cryogenic GaAs laser power converters	35
Data analysis of industrial czochralski process: Investigation of ingots with structure loss	35
A contactless method of emitter sheet resistance measurement for silicon wafers	35
Design of near-ideal and omnidirectional selective solar absorber for high-temperature applications	34
Improvement of silicon heterojunction module efficiency using fast illumination post-treatments	34
Interfacial engineering with a ferrocene derivative for air-stable inverted perovskite solar cells with high fill factor of 83.57 %	34
Editorial Board	34
Analysis of scale and frame interface effects on the solidification properties of solar salt in mesopores	34
The synergistic effect of Ta-doping and antireflective TaO layer on the thermochromic VO2 thin films for smart windows	34
An optimized Fe3O4/Fe2O3 PN junction photoelectrode with multiscale structure and broad spectrum absorption	34
Polyethylene glycol/polyvinyl butyral/graphene nanoplates as composite phase-change materials with high thermal conductivity	34
The strain regulation of atomic structure and properties on ultra-stable monolayer butylammonium-based halide perovskites: Insight from density functional theory	33
Preface: SiliconPV 2023, the 13th international conference on crystalline silicon photovoltaics	33
Laboratory intercomparison of solar absorptance and thermal emittance measurements at room temperature	33
Effect of metallic magnesium on enhanced specific heat capacity of chloride molten salts for solar thermal storage applications	33
Semiconductor-dielectric-metal solar absorbers with high spectral selectivity	33
Enhanced dew harvest with porous wind covers	33
Atomic layer deposition of NiO applied in a monolithic perovskite/PERC tandem cell	33
Understanding the impact of sky diffuse irradiance on curved photovoltaic modules	32
Inverse design of colored daytime radiative coolers using deep neural networks	32
Liquid/liquid interfacial cross-linking reaction of conjugated polymer prepared cross-linked films with improved electrochromic and capacitance properties	32
Inorganic multi-color transmissive-type electrochromic electrodes based on Fabry-Perot interferometer for full-solid smart window	32
Thermo-optical performance of bare laser-synthesized TiN nanofluids for direct absorption solar collector applications	32
Perovskite solar cells under protons irradiation: From in-situ IV-monitoring to root cause degradation elucidation	32
Passive radiative cooling films doped with SiO2-TiO2 of different particle sizes with excellent solar reflectivity and high infrared emissivity	31
Enhanced flexibility and light utilization for high-efficiency all-air-processed carbon-based perovskite solar cells	31
Improving the thermo-economic performance of hemispherical solar distiller using copper oxide nanofluids and phase change materials: Experimental and theoretical investigation	31
Improved thermophotovoltaic system performance with a novel metamaterial thermal emitter combined with a passive radiative cooling approach	31
A comprehensive review on preparation, dispersion stability and phase change cycling stability of phase change microemulsions	31

Capacitance spectroscopy of thin-film formamidinium lead iodide based perovskite solar cells	31
Evaluation of the photon contributions to the solar energy conversion for organic luminescent down-shifting liquid beam splitters in hybrid photovoltaic-thermal (PVT) applications using raytracing Mon	31
Flexible biomass-based phase change materials: L-N-Ti for environmentally friendly thermal management	31
Thermoplasmonics effect of Au-rGO/TiO2 photoelectrode in solar-hydrogen conversion	31
Editorial Board	30
Optimization and comparative study of hemispherical solar stills using welded wire mesh as a secondary porous absorber– Part II: Impact of varying positions in water basins	30
Distinct role of hexagonal tungsten in tungsten/ceria heterojunction in efficient utilization of visible flux	30
Editorial Board	30
Comprehensive study of photoluminescence and device properties in Cu2Zn(Sn1−xGex)S4 monograins and monograin layer solar cells	30
Effect of introducing chemically activated biochar as support material on thermal properties of different organic phase change materials	30
Al–Ni alloy-based core-shell type microencapsulated phase change material for high temperature thermal energy utilization	30
In-line thickness imaging tool and detail study of interdigitated back-contacts for silicon heterojunction solar cells	30
Multilayer anti-reflective coating with ultra-low refractive index SiO2 nanopillars for high efficiency multi-junction GaAs solar cells	30
A “net-ball” structure fiber membrane with electro-/photo-thermal heating and phase change synchronous temperature regulation capacity via electrospinning	30
Low-cost deposition of tunable band gap Zn(O,S) as electron transport layer for crystalline silicon heterojunction solar cells	30
Small-signal capacitance-frequency modelling of the back contact barrier in Cu(In,Ga)Se2 solar cells	29
Effects of quasi-fermi level splitting and band tail states on open circuit voltage towards high-efficiency Cu(In,Ga)Se2 solar cells	29
Robust denoising methodology for outdoor electroluminescence images of photovoltaic modules using deep learning	29
Bi-layer in-situ phosphorus doped poly-Si films by PECVD for blistering-free high-efficiency industrial TOPCon solar cells	29
Accurately quantifying the recombination pathways unique in back contact solar cells	29
Effect of carbon nanotubes in conductive adhesives for photovoltaics	29
Close roof-mounted system temperature estimation for compliance to IEC TS 63126	29
Accelerating the discovery of direct bandgap doped-spinel photovoltaic materials: A target-driven approach using interpretable machine learning	29
Optimization of interface properties in p-type poly-SiO passivating contacts through intrinsic buffer layer modification	29
Remarkable near-infrared electrochromism of ITO@WO3 with long-term stability prepared by a facile method	29
Black-to-transmissive polymer films via electrochemical copolymerization with high-performance electrochromic and supercapacitor bifunction	28
Novel optical modulation device based on an electrochemical reaction with seven optical states: Clear colorless, mirror, black, yellow, green, cyan, and blue emission	28
Hydroxypropyl cellulose thermochromic hydrogel with efficient passive radiative cooling and adjustable visible light transmittance	28
Pulsed laser deposited and sulfurized Cu2ZnSnS4 thin film for efficient solar cell	28
Validation of shading model in SolarMoves	28
High efficiency perovskite solar cells with synchronous optimization by formic acid vapor annealing process and composite electron transport layer	28
Electrochromic and energy storage properties of novel terpyridine-Fe(II) coordination polymers: Improving performance by molecular engineering of nonconjugated linkers from linear to three-arm star co	28
Mesoporous aluminium titanate: Superhydrophilic and photocatalytic antireflective coating for solar glass covers with superior mechanical properties	28
Sustaining efficiency at elevated power densities in InGaAs airbridge thermophotovoltaic cells	28
Comprehensive voltage-loss analysis and reduction of radiative recombination voltage loss in quantum-structured solar cells	28
Enhanced optical properties of BiVO4 photoanode with subwavelength moth-eye structure fabricated via e-beam evaporation and direct printing	28
Tomography based pore-level structural optimization for reducing pressure drop of porous volumetric solar receiver	28
Methodology for local ageing and damage development characterization of solar glass/encapsulant interfaces under superimposed fatigue stresses and environmental influences	28
Corrigendum to “Interactions between aluminium and fired passivating contacts during fire-through metallization” [Sol. Energy Mater. Sol. Cell. 249 (2023) 112051]	27
High-temperature dynamic corrosion mechanisms of austenitic stainless and carbon steels in nitrates for concentrating solar power	27
Estimation of the reliability figures of space GaInP/Ga(In)As/Ge triple junction solar cells from very high temperature accelerated life tests with forward and reverse biasing	27
Electrochromic materials containing pyridinium salt and benzoate moieties with dual-colored and long-life performance	27
Performance improvement of CSP particle receivers by depositing spinel absorber coatings	27
Thin film formation of wet chemically deposited NiOx and parasitic oxides at NiOx/Si interfaces during high-temperature annealing of selective contacts in perovskite/Si tandem solar cells	27
A 4E analyses of pyramidal solar still with novel techniques for efficient desalination	27
Thermal management of portable photovoltaic systems using novel phase change materials with efficiently enhanced thermal conductivity	27
Tuning of the structural, morphological, optoelectronic and interfacial properties of electrodeposited Cu2O towards solar water-splitting by varying the deposition pH	27
Epitaxial lift-off process for GaAs solar cells controlled by InGaAs internal sacrificial stressor layers and a PMMA surface stressor	27
High-temperature corrosion rate and diffusion modelling of Ni-coated incoloy 800H alloy in MgCl2–KCl heat transfer fluid	27
Cyclization of methoxy groups on spiro-type hole transporting materials for efficient and stable perovskite solar cells	27
A comprehensive study to find the optimal fraction of nanoparticle coated at the interface of solar desalination absorbers: 5E and GHGs analysis in different seasons	27
Encapsulation of inorganic phase change thermal storage materials and its effect on thermophysical properties: A review	26
Form-stable phase change nanocapsules with photo and electric dual responses for multipurpose applications in energy storage and conversion	26
Q.ANTUM NEO with LECO Exceeding 25.5 % cell Efficiency	26
Solar energy harvester based on polarization insensitive and wide angle stable UWB absorber for UV, visible and IR frequency range	26
State of the art of end-of-life silicon-based solar panels recycling with a bibliometric perspective	26
Enhanced photo-thermal conversion in phase change materials by Cu-Zn Bi-metallic metal-organic framework and expanded graphite	26
Low-cost WO3 nanoparticles / PVA smart photochromic glass windows for sustainable building energy savings	26
Aqueous intelligent bi-functional electrochromic-energy storage device on heterostructured nanoarrays:In-situ repairability and Al3+ ion effect	26
Enhancing the reliability of TOPCon technology by laser-enhanced contact firing	26
TiN doped Ni–Co bimetal organic framework based-composite phase change material with enhanced photothermal conversion performance	26
Advancements in end-of-life crystalline silicon photovoltaic module recycling: Current state and future prospects	26
Influence of minerals with different porous structures on thermochemical heat storage performance of CaCl2-based composite sorbents	26
Harnessing optimized SiO₂ particles for enhanced passive daytime radiative cooling in thin composite coatings	26
Energy and exergy analysis of PV modules: Sustainable improvements through fin structure and spray cooling	26
Unlocking the potential of carrier-selective contacts: Key insights for designing c-Si solar cells with efficiency beyond 28 %	26
Natural energy materials and storage systems for solar dryers: State of the art	26
Solvothermal synthesis of oxygen deficient tungsten oxide nano-particle for dual band electrochromic devices	26
MXene-based phase change materials for multi-source driven energy storage, conversion and applications	25
Tantalum-doped tin oxide films as an effective diffusion barrier for copper metallization of silicon heterojunction solar cells	25
Gold nanorods as performance enhancers in planar perovskite solar cells: A numerical study	25
Investigation and optimization on spectrally selective absorption for enhanced thermal performance in porous volumetric solar receivers	25
Dynamic solutions for urban cooling: integrating thermochromism and photoluminescence in dynamic retroreflective skins for heat mitigation	25
Flexible GaInP/Ga(In)As/Ge triple-junction space solar cells with a simple fabrication process based on Ge substrate thinning demonstrate power-to-mass ratios of 1.3 kW/kg	25
The photovoltaic Dyson sphere	25
Study on the mechanism of advanced pre-degradation on hydrogenation of multi-crystalline silicon solar cells	25
Examining the performance of optically optimized solar stills with phase change materials: A theoretical perspective on ongoing debates	25
Analytical model for photocurrent density in linearly graded band gap Sb2Se3 solar cells	25
A critical review of unrealistic results in SCAPS-1D simulations: Causes, practical solutions and roadmap ahead	25
Solar thermal irradiation cycles and their influence on the corrosion behaviour of stainless steels with molten salt used in concentrated solar power plants	25
Performance evaluation of different designs of back-contact perovskite solar cells	25
Bio-inspired molybdenum carbide/carbon-based aerogel with advanced thermal management as a solar evaporator	25
Phosphorus doped hydrogenated silicon oxycarbide: Film formation, properties and its application on silicon heterojunction solar cell	25
The impact of interface recombination on the external quantum efficiency of silicon solar cells	25
Resonant-reflecting/absorbing coatings for maximizing the efficiency of hybrid thermal-electric power generation	25
Advancing photovoltaic cells defect detection in electroluminescence images through exploring multiple object detectors	25
CO2-derived carbon for improving thermal energy storage of molten carbonate	25
Intelligent construction and optimization based on the heatsep method of a supercritical CO2 brayton cycle driven by a solar power tower system	24
Metamorphic front- and rear-junction 1.7 eV GaInP solar cells with high open-circuit voltage	24
Low temperature based PDINO cathode interlayer for high operational photostable inverted non-fullerene organic solar cells	24
Thermodynamic and kinetic corrosion behavior of alloys in molten MgCl2–NaCl eutectic: FPMD simulations and electrochemical technologies	24
Reduction of the initial defects generated during casting of quasi-single crystalline silicon by reserving gaps between seed crystals	24
Editorial Board	24
Influence of CuO doping on cobalt oxide for thermochemical energy storage	24
Hybrid electrochromic device with transparent electrolyte	24