Industrial Crops and Products

Papers
(The TQCC of Industrial Crops and Products is 13. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Lignin extraction and upgrading using deep eutectic solvents160
Lignin-based electrodes for energy storage application158
Phytic acid: A bio-based flame retardant for cotton and wool fabrics131
Characterization of nanocellulose extracted from short, medium and long grain rice husks104
Effects of the advanced organosolv pretreatment strategies on structural properties of woody biomass103
Circular bioeconomy and integrated biorefinery in the production of xylooligosaccharides from lignocellulosic biomass: A review99
Biobased, reprocessable and weldable epoxy vitrimers from epoxidized soybean oil98
Organic solid waste biorefinery: Sustainable strategy for emerging circular bioeconomy in China93
Simultaneous quantitative screening of 53 phytochemicals in 33 species of medicinal and aromatic plants: A detailed, robust and comprehensive LC–MS/MS method validation91
Technical lignin and its potential modification routes: A mini-review91
Antibacterial activity and mechanism of action saponins from Chenopodium quinoa Willd. husks against foodborne pathogenic bacteria90
Synergistic effect of hydrogen peroxide and ammonia on lignin88
Analysis of polyphenols in apple pomace: A comparative study of different extraction and hydrolysis procedures87
Seed priming with melatonin effects on growth, essential oil compounds and antioxidant activity of basil (Ocimum basilicum L.) under salinity stress87
Valorization of industrial lignin to value-added chemicals by chemical depolymerization and biological conversion85
From Wood and Hemp Biomass Wastes to Sustainable Nanocellulose Foams84
UV-B promotes flavonoid synthesis in Ginkgo biloba leaves80
Microwave-assisted deep eutectic solvents (DES) pretreatment of control and transgenic poplars for boosting the lignin valorization and cellulose bioconversion80
Lignin fractionation: Effective strategy to reduce molecule weight dependent heterogeneity for upgraded lignin valorization79
Biochar filled high-density polyethylene composites with excellent properties: Towards maximizing the utilization of agricultural wastes78
Microencapsulation of Mentha spicata essential oil by spray drying: Optimization, characterization, release kinetics of essential oil from microcapsules in food models76
Efficient removal of lignin from vegetable wastes by ultrasonic and microwave-assisted treatment with ternary deep eutectic solvent76
Low-cost activated carbon preparation from Corn stigmata fibers chemically activated using H3PO4, ZnCl2 and KOH: Study of methylene blue adsorption, stochastic isotherm and fractal kinetic75
Using lignin as the precursor to synthesize Fe3O4@lignin composite for preparing electromagnetic wave absorbing lignin-phenol-formaldehyde adhesive75
Synergistic antioxidant and antimicrobial activities of essential oils of some selected medicinal plants in combination and with synthetic compounds75
Potential application of grape (Vitis vinifera L.) stem extracts in the cosmetic and pharmaceutical industries: Valorization of a by-product74
Application of lignin in preparation of slow-release fertilizer: Current status and future perspectives73
Insights into bamboo delignification with acidic deep eutectic solvents pretreatment for enhanced lignin fractionation and valorization72
Nitrogen supply affects cannabinoid and terpenoid profile in medical cannabis (Cannabis sativa L.)70
Soybean biodiesel production using synergistic CaO/Ag nano catalyst: Process optimization, kinetic study, and economic evaluation70
Effect of alkali treatment on microstructure and thermal stability of parenchyma cell compared with bamboo fiber69
Comparison of response surface methodology (RSM) and artificial neural network (ANN) modelling for supercritical fluid extraction of phytochemicals from Terminalia chebula pulp and optimization using 69
Cannabidiol-enriched hemp essential oil obtained by an optimized microwave-assisted extraction using a central composite design69
Establishment of cell suspension cultures of Ocimum basilicum L. and enhanced production of pharmaceutical active ingredients66
Valorization of cashew nut processing residues for industrial applications65
Role of microbial diversity to influence the growth and environmental remediation capacity of bamboo: A review65
Seed priming with gibberellic acid and melatonin in rapeseed: Consequences for improving yield and seed quality under drought and non-stress conditions64
Effects of extraction methods on morphology, structure and properties of bamboo cellulose63
Phenolic profiles and screening of potential α-glucosidase inhibitors from Polygonum aviculare L. leaves using ultra-filtration combined with HPLC-ESI-qTOF-MS/MS and molecular docking analysis63
Light matters: Effect of light spectra on cannabinoid profile and plant development of medical cannabis (Cannabis sativa L.)63
Lignin-based adsorbent materials for metal ion removal from wastewater: A review62
Kapok leaves extract and synergistic iodide as novel effective corrosion inhibitors for Q235 carbon steel in H2SO4 medium62
Microwave-assisted extraction of an acidic polysaccharide from Ribes nigrum L.: Structural characteristics and biological activities62
Development of ultrasound aided chemical pretreatment methods to enrich saccharification of wheat waste biomass for polyhydroxybutyrate production and its characterization62
Effect of different fertilizer sources and harvesting time on the growth characteristics, nutrient uptakes, essential oil productivity and composition of Mentha x piperita L.62
A combined pretreatment with ultrasound-assisted alkaline solution and aqueous deep eutectic solvent for enhancing delignification and enzymatic hydrolysis from oil palm fronds62
A review for lignin valorization: Challenges and perspectives in catalytic hydrogenolysis61
Characterization of biomass-based materials for building applications: The case of straw and olive tree waste61
Recent advances in cannabis biotechnology61
Extraction and antioxidant activities in vivo of pumpkin polysaccharide60
Unlocking the role of lignin for preparing the lignin-based wood adhesive: A review60
Cellulose/polyaniline hybrid nanocomposites: Design, fabrication, and emerging multidimensional applications60
Remodeling agro-industrial and food wastes into value-added bioactives and biopolymers59
Changes in essential oil compositions, total phenol, flavonoids and antioxidant capacity of Achillea millefolium at different growth stages59
Biobutanol production from sugarcane straw: Defining optimal biomass loading for improved ABE fermentation59
Plasticized hydroxypropyl cassava starch blended PBAT for improved clarity blown films: Morphology and properties59
Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing59
Electrospun biomass based carbon nanofibers as high-performance supercapacitors58
Property changes in plant fibres during the processing of bio-based composites58
Essential oil-based nano-emulsions: Effect of different surfactants, sonication and plant species on physicochemical characteristics58
Bio-inspired co-deposition strategy of aramid fibers to improve performance of soy protein isolate-based adhesive58
Microwave-assisted ultra-fast synthesis of carbon quantum dots from linter: Fluorescence cancer imaging and human cell growth inhibition properties58
Polysaccharides extracted from pistachio external hull: Characterization, antioxidant activity and potential application on meat as preservative57
Alternative lignocellulosic raw materials in particleboard production: A review57
Adding value to poly (butylene succinate) and nanofibrillated cellulose-based sustainable nanocomposites by applying masterbatch process57
Efficient lactic acid production from cassava bagasse by mixed culture of Bacillus coagulans and lactobacillus rhamnosus using stepwise pH controlled simultaneous saccharification and co-fermentation57
Heneicosane—A novel microbicidal bioactive alkane identified from Plumbago zeylanica L56
Sustainable alternative for bisphenol A epoxy resin high-performance and recyclable lignin-based epoxy vitrimers56
Catalyst-free self-healing fully bio-based vitrimers derived from tung oil: Strong mechanical properties, shape memory, and recyclability56
Impregnation of phytic acid into the delignified wood to realize excellent flame retardant56
Upgrading wood biorefinery: An integration strategy for sugar production and reactive lignin preparation56
Valorisation of olive stone by-product for sugar production using a sequential acid/steam explosion pretreatment55
Enzyme mediated multi-product process: A concept of bio-based refinery55
Agro-industrial wastes as building insulation materials: A review and challenges for Euro-Mediterranean countries55
A novel use of solid waste extract from tea factory as corrosion inhibitor in acidic media on boiler quality steel55
The application of biochar alleviated the adverse effects of drought on the growth, physiology, yield and quality of rapeseed through regulation of soil status and nutrients availability55
Process optimization of microwave-assisted extraction of bioactive molecules from avocado seeds55
Soybean extract firstly used as a green corrosion inhibitor with high efficacy and yield for carbon steel in acidic medium54
Enhanced Zn(II) ion adsorption on surface modified mixed biomass – Borassus flabellifer and Aspergillus tamarii: Equilibrium, kinetics and thermodynamics study54
Study on the variation law of bamboo fibers’ tensile properties and the organization structure on the radial direction of bamboo stem54
Production of bioethanol from pumpkin peel wastes: Comparison between response surface methodology (RSM) and artificial neural networks (ANN)54
Catalytic performance of MgO /Fe2O3-SiO2 core-shell magnetic nanocatalyst for biodiesel production of Camelina sativa seed oil: Optimization by RSM-CCD method54
Legume-based intercropping systems promote beneficial rhizobacterial community and crop yield under stressing conditions54
Preparation of a novel lignin-based film with high solid content and its physicochemical characteristics54
Biomass–derived cellulose nanofibrils membrane from rice straw as sustainable separator for high performance supercapacitor54
Production of cellulose nanocrystals integrated into a biochemical sugar platform process via enzymatic hydrolysis at high solid loading53
Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber52
Insecticidal activity of essential oil from Cephalotaxus sinensis and its main components against various agricultural pests52
Enzymatic engineering of nanometric cellulose for sustainable polypropylene nanocomposites52
The potential of biochar and lignin-based adsorbents for wastewater treatment: Comparison, mechanism, and application—A review52
Gum arabic – A versatile natural gum: A review on production, processing, properties and applications52
Tea and coffee polyphenols and their biological properties based on the latest in vitro investigations50
Effect of lignin structure in different biomass resources on the performance of lignin-based carbon nanofibers as supercapacitor electrode50
Process optimization of intermediate-wave infrared drying: Screening by Plackett–Burman; comparison of Box-Behnken and central composite design and evaluation: A case study50
Hemicellulose degradation: An overlooked issue in acidic deep eutectic solvents pretreatment of lignocellulosic biomass49
Cellulose nanocrystal extracted from date palm fibre: Morphological, structural and thermal properties49
Optimization processes of biodiesel production from pig and neem (Azadirachta indica a.Juss) seeds blend oil using alternative catalysts from waste biomass49
Efficacy of microalgal extracts as biostimulants through seed treatment and foliar spray for tomato cultivation49
Wheat straw pre-treatments using eco-friendly strategies for enhancing the tensile properties of bio-based polylactic acid composites49
Investigation into lignin modified PBAT/thermoplastic starch composites: Thermal, mechanical, rheological and water absorption properties49
Major components in Lilac and Litsea cubeba essential oils kill Penicillium roqueforti through mitochondrial apoptosis pathway49
Biochar impacts on NH3-volatilization kinetics and growth of sweet basil (Ocimum basilicum L.) under saline conditions48
The effect of lignin degradation products on the generation of pseudo-lignin during dilute acid pretreatment48
Distinct mechanisms of enzymatic saccharification and bioethanol conversion enhancement by three surfactants under steam explosion and mild chemical pretreatments in bioenergy Miscanthus48
Agricultural waste of Eriobotrya japonica L. (Loquat) seeds and flora leaves as source of natural dye and bio-mordant for coloration and bio-functional finishing of wool textile48
Hydrophobic modification of lignin for rubber composites47
Bio-based thermoplastic polyurethane derived from polylactic acid with high-damping performance47
Commercial clustering of sustainable bamboo species in India47
Developing an antifungal and high-strength soy protein-based adhesive modified by lignin-based polymer47
Preparation and Characterization of Porous Microcrystalline Cellulose from Corncob47
Ultrasound-assisted deep eutectic solvent extraction of echinacoside and oleuropein from Syringa pubescens Turcz.47
Effect of different biomass species and pyrolysis temperatures on heavy metal adsorption, stability and economy of biochar46
Application of deep eutectic solvents for separation and determination of bioactive compounds in medicinal plants46
Preparation of nano-xylan and its influences on the anti-fungi performance of straw fiber/HDPE composite46
Miscanthus in the European bio-economy: A network analysis46
Essential oils of two medicinal plants and protective properties of jack fruits against the spoilage bacteria and fungi46
Dyeing of textiles with natural dyes extracted from Terminalia arjuna and Thespesia populnea fruits45
Transcriptome analysis revealed key genes and pathways related to cadmium-stress tolerance in Kenaf (Hibiscus cannabinus L.)45
Synthesis of 5-HMF from an ultrasound-ionic liquid pretreated sugarcane bagasse by using a microwave-solid acid/ionic liquid system45
Efficient genome editing of rubber tree (hevea brasiliensis) protoplasts using CRISPR/Cas9 ribonucleoproteins45
Formulation and assessment of nano-encapsulated bioherbicides based on biopolymers and essential oil45
Zein films with porous polylactic acid coatings via cold plasma pre-treatment45
Preparation of magnesium, nitrogen-codoped carbon quantum dots from lignin with bright green fluorescence and sensitive pH response45
Antibacterial activity and mechanism of green tea polysaccharide conjugates against Escherichia coli45
Advanced textile technology for fabrication of ramie fiber PLA composites with enhanced mechanical properties45
Multifunctional CeO2-coated pulp/cellulose nanofibers (CNFs) membrane for wastewater treatment: Effective oil/water separation, organic contaminants photodegradation, and anti-bioadhesion activity45
Quality classification of Jatropha curcas seeds using radiographic images and machine learning45
In vitro and in vivo antifungal activity and preliminary mechanism of cembratrien-diols against Botrytis cinerea45
Lignin-based superhydrophobic melamine resin sponges and their application in oil/water separation45
Together is better: poly(tannic acid) nanorods functionalized polysaccharide hydrogels for diabetic wound healing44
Solubility study of lignin in industrial organic solvents and investigation of electrochemical properties of spray-coated solutions44
Enhancement of the nanofibrillation of birch cellulose pretreated with natural deep eutectic solvent44
Strong, ductile and biodegradable polylactic acid/lignin-containing cellulose nanofibril composites with improved thermal and barrier properties43
Characterization and 3D printability of poly (lactic acid)/acetylated tannin composites43
Variability in chemical composition and antimicrobial activity of Tagetes minuta L. essential oil collected from different locations of Himalaya43
Superfine grinding affects physicochemical, thermal and structural properties of Moringa Oleifera leaf powders43
Antibacterial activity of tea saponin from Camellia oleifera shell by novel extraction method43
Extraction and purification of d-limonene from orange peel wastes: Recent advances43
Biodegradable packaging of cellulose acetate incorporated with norbixin, lycopene or zeaxanthin43
Phytol, (E)-nerolidol and spathulenol from Stevia rebaudiana leaf essential oil as effective and eco-friendly botanical insecticides against Metopolophium dirhodum42
Potential sources and methodologies for the recovery of phenolic compounds from distillation residues of Mediterranean aromatic plants. An approach to the valuation of by-products of the essential oil42
Characterization of cassava starch/soy protein isolate blends obtained by extrusion and thermocompression42
Pine needles lignocellulosic ethylene scavenging paper impregnated with nanozeolite for active packaging applications42
Physiological and UPLC-MS/MS widely targeted metabolites mechanisms of alleviation of drought stress-induced soybean growth inhibition by melatonin42
Wood delignification with aqueous solutions of deep eutectic solvents42
A comparison of extraction yield, quality and thermal properties from Sapindus mukorossi seed oil between microwave assisted extraction and Soxhlet extraction42
Antioxidant and antibacterial activities of essential oil from Atractylodes lancea rhizomes42
Productivity and energy balance of maize and sorghum grown for biogas in a large-area farm in Poland: An 11-year field experiment42
Eco-friendly flame retardant and smoke suppression coating containing boron compounds and phytic acids for nylon/cotton blend fabrics42
Exploring the potential of microwaves and ultrasounds in the green extraction of bioactive compounds from Humulus lupulus for the food and pharmaceutical industry42
Comparison of lignin distribution, structure, and morphology in wheat straw and wood41
Morinda citrifolia L. leaves extracts obtained by traditional and eco-friendly extraction solvents: Relation between phenolic compositions and biological properties by multivariate analysis41
Chemical profile, antioxidant, antimicrobial, enzyme inhibitory, and cytotoxicity of seven Apiaceae species from Turkey: A comparative study41
Valorization of seabuckthorn pomace to obtain bioactive carotenoids: An innovative approach of using green extraction techniques (ultrasonic and microwave-assisted extractions) synergized with green s41
Fed-batch high-solids enzymatic saccharification of lignocellulosic substrates with a combination of additives and accessory enzymes41
High oleic safflower oil as a feedstock for stable biodiesel and biolubricant production41
Chemical composition, antibacterial activity and study of the interaction mechanisms of the main compounds present in the Alpinia galanga rhizomes essential oil41
Cellulosic fibres-based epoxy composites: From bioresources to a circular economy41
Exploring the bio-control efficacy of Artemisia fragrans essential oil on the perennial weed Convolvulus arvensis: Inhibitory effects on the photosynthetic machinery and induction of oxidative stress41
Revealing the structure-activity relationship between lignin and anti-UV radiation41
Extrusion followed by ultrasound as a chemical-free pretreatment method to enhance enzymatic hydrolysis of rice hull for fermentable sugars production41
Second-generation bioethanol production from corncob – A comprehensive review on pretreatment and bioconversion strategies, including techno-economic and lifecycle perspective41
Valorisation of grape stalks and pomace for the production of bio-based succinic acid by Actinobacillus succinogenes41
Plant architecture manipulation increases cannabinoid standardization in ‘drug-type’ medical cannabis41
Metabolome and transcriptome analyses reveal flavonoids biosynthesis differences in Ginkgo biloba associated with environmental conditions40
Construction of a novel B/N/Si synergistic flame retardant system and its application on cotton fabric40
Effects of polyol-based deep eutectic solvents on the efficiency of rice straw enzymatic hydrolysis40
Efficient capture of lead ion and methylene blue by functionalized biomass carbon-based adsorbent for wastewater treatment40
Acaricidal properties of hemp (Cannabis sativa L.) essential oil against Dermanyssus gallinae and Hyalomma dromedarii40
Sustainable and malleable polyurethane networks from castor oil and vanillin with tunable mechanical properties40
Global identification of Ginkgo biloba microRNAs and insight into their role in metabolism regulatory network of terpene trilactones by high-throughput sequencing and degradome analysis40
Integrating transcriptomics and metabolomics to studies key metabolism, pathways and candidate genes associated with drought-tolerance in Carthamus tinctorius L. Under drought stress40
Lignocellulosic biomass for bioethanol: Insight into the advanced pretreatment and fermentation approaches40
A novel reactive flame retardant for cotton fabric based on a thiourea-phosphoric acid polymer40
Brassica carinata genotypes demonstrate potential as a winter biofuel crop in South East United States40
The effect of graded fibrous structure of bamboo (Phyllostachys edulis) on its water vapor sorption isotherms39
Physical and Functional Properties, Digestibility, and Storage Stability of Spray- and Freeze-Dried Microencapsulated Bioactive Products from Moringa stenopetala Leaves Extract39
Rapid detection of saffron (Crocus sativus L.) Adulterated with lotus stamens and corn stigmas by near-infrared spectroscopy and chemometrics39
Box-Behnken experimental design for a green extraction method of phenolic compounds from olive leaves39
Adsorption and desorption of chlorogenic acid by macroporous adsorbent resins during extraction of Eucommia ulmoides leaves39
Importance of cotton fiber elongation in fiber processing39
Lignin dissolution and lignocellulose pretreatment by carboxylic acid based deep eutectic solvents39
Calcium alginate hydrogels reinforced with cellulose nanocrystals for methylene blue adsorption: Synthesis, characterization, and modelling39
Organosolv lignin/Fe3O4 nanoparticles applied as a β-glucosidase immobilization support and adsorbent for textile dye removal39
Ultrasound-assisted extraction of total anthocyanins from Rubia sylvatica Nakai fruit and radical scavenging activity of the extract39
IAA priming improves the germination and seedling growth in cotton (Gossypium hirsutum L.) via regulating the endogenous phytohormones and enhancing the sucrose metabolism39
Avermectin loaded carboxymethyl cellulose nanoparticles with stimuli-responsive and controlled release properties39
Extraction and properties of Ginkgo biloba leaf polysaccharide and its phosphorylated derivative39
Gelatin-based packaging material incorporated with potato skins carbon dots as functional filler39
Acid hydrotropic fractionation of switchgrass at atmospheric pressure using maleic acid in comparison with p-TsOH: Advantages of lignin esterification39
Essential oil and its nanoemulsion of Araucaria heterophylla resin: Chemical characterization, anti-inflammatory, and antipyretic activities39
Development of highly flexible electromagnetic interference shielding composites for electronic applications using Cobalt/ Hevea brasiliensis seed husk carbon dots/Bamboo microfibre-polyvinyl alcohol38
Chemical composition of Crithmum maritimum L. essential oil and hydrodistillation residual water by GC-MS and HPLC-DAD-MS/MS, and their biological activities38
Genetic stability analysis using DNA barcoding and molecular markers and foliar micro-morphological analysis of in vitro regenerated and in vivo grown plants of Artemisia vulgaris L.38
Extraction, structure characterization, carboxymethylation and antioxidant activity of acidic polysaccharides from Craterellus cornucopioides38
Chemical and structural characterization of hardwood and softwood LignoForce™ lignins38
Effects of metal promoters on one-step Pt/SAPO-11 catalytic hydrotreatment of castor oil to C8-C16 alkanes38
Açaí seeds: An unexplored agro-industrial residue as a potential source of lipids, fibers, and antioxidant phenolic compounds38
Rice straw pretreatment with KOH/urea for enhancing sugar yield and ethanol production at low temperature38
Transesterification of waste cooking oil to biodiesel by walnut shell/sawdust as a novel, low-cost and green heterogeneous catalyst: Optimization via RSM and ANN38
Skin-care functions of peptides prepared from Chinese quince seed protein: Sequences analysis, tyrosinase inhibition and molecular docking study38
Facile fabrication of rape straw biomass fiber/β-CD/Fe3O4 as adsorbent for effective removal of ibuprofen38
Tin-loaded sulfonated rape pollen for efficient catalytic production of furfural from corn stover38
Mentha spicata essential oil nanoformulation and its larvicidal application against Culex pipiens and Musca domestica38
Ultralight and porous cellulose nanofibers/polyethyleneimine composite aerogels with exceptional performance for selective anionic dye adsorption37
The effect of ball milling on birch, pine, reed, walnut shell enzymatic hydrolysis recalcitrance and the structure of the isolated residual enzyme lignin37
The combination of blue and red LED light improves growth and phenolic acid contents in Salvia miltiorrhiza Bunge37
Radio frequency-assisted enzymatic extraction of anthocyanins from Akebia trifoliata (Thunb.) Koidz. flowers: Process optimization, structure, and bioactivity determination37
Long textile fibres from the midrib of date palm: Physiochemical, morphological, and mechanical properties37
Optimization of infrared-drying parameters for Ginkgo biloba L. seed and evaluation of product quality and bioactivity37
Fracture mechanisms of moso bamboo (Phyllostachys pubescens) under longitudinal tensile loading37
Drying methods affect organoleptic and physicochemical properties of rehydrated ginkgo seed slices37
Protein adhesives: Alkaline hydrolysis of different crop proteins as modification for improved wood bonding performance37
Comparison of adsorption properties of a cellulose-rich modified rice husk for the removal of methylene blue and aluminum (III) from their aqueous solution37
Stimulation of health-promoting triterpenoids accumulation in Centella asiatica (L.) Urban leaves triggered by postharvest application of methyl jasmonate and salicylic acid elicitors37
Catalytic upgrading of biomass derived furans37
Growth years and post-harvest processing methods have critical roles on the contents of medicinal active ingredients of Scutellaria baicalensis37
Comparison of chemical composition and biological activities of Algerian seed oils of Pistacia lentiscus L., Opuntia ficus indica (L.) mill. and Argania spinosa L. Skeels37
Development of a sustainable bioprocess based on green technologies for xylitol production from corn cob37
Recently explored natural cellulosic plant fibers 2018–2022: A potential raw material resource for lightweight composites37
Preparation and characterization of lignin-containing self-healing polyurethane elastomers with hydrogen and disulfide bonds37
Prolonged sublethal effects of essential oils from non-wood parts of nine conifers on key insect pests and vectors36
Phenolic profiles, antioxidant, and antiproliferative activities of turmeric (Curcuma longa)36
Targeted metabolic engineering of committed steps improves anti-cancer drug camptothecin production in Ophiorrhiza pumila hairy roots36
Volatile and polyphenol composition, anti-oxidant, anti-diabetic and anti-aging properties, and drying kinetics as affected by convective and hybrid vacuum microwave drying of Rosmarinus officinalis L36
Sustainable production of cellulose nanofibrils from Kraft pulp for the stabilization of oil-in-water Pickering emulsions36
Volatile compound analysis and aroma evaluation of tea-scented roses in China36
Insight into anti-corrosion mechanism of Dalbergia odorifera leaves extract as a biodegradable inhibitor for X70 steel in sulfuric acid medium36
Machine learning (ML) algorithms and artificial neural network for optimizing in vitro germination and growth indices of industrial hemp (Cannabis sativa L.)36
Efficient production of lignin-based slow-release nitrogen fertilizer via microwave heating36
Flower-like NiMn-layered double hydroxide microspheres coated on biomass-derived 3D honeycomb porous carbon for high-energy hybrid supercapacitors36
Obtaining cellulosic nanofibrils from oat straw for biocomposite reinforcement: Mechanical and barrier properties36
Rapeseed proteins for technical applications: Processing, isolation, modification and functional properties – A review36
Can lignin be transformed into agrochemicals? Recent advances in the agricultural applications of lignin36
A new approach in the hydrophobic modification of polysaccharide-based edible films using structured oil nanoparticles35
Construction of sugarcane bagasse-derived porous and flexible carbon nanofibers by electrospinning for supercapacitors35
Hemp (Cannabis sativa L.) for high-value textile applications: The effective long fiber yield and quality of different hemp varieties, processed using industrial flax equipment35
Management of crop residues with special reference to the on-farm utilization methods: A review35
Inulin extraction from common inulin-containing plant sources35
Effects of operational conditions on auto-catalyzed and sulfuric-acid-catalyzed hydrothermal pretreatment of sugarcane bagasse at different severity factor35
Chemically and physically crosslinked lignin hydrogels with antifouling and antimicrobial properties35
Transesterification of sunflower oil to biodiesel fuel utilizing a novel K2CO3/Talc catalyst: Process optimizations and kinetics investigations35
Structures and pyrolytic characteristics of organosolv lignins from typical softwood, hardwood and herbaceous biomass35
Effective conversion of sugarcane bagasse to furfural by coconut shell activated carbon-based solid acid for enhancing whole-cell biosynthesis of furfurylamine35
Integrative analysis of metabolome and transcriptome reveals molecular regulatory mechanism of flavonoid biosynthesis in Cyclocarya paliurus under salt stress35
Preparation of low carbon impact lignin nanoparticles with controllable size by using different strategies for particles recovery35
Structural modification of pine and poplar wood by alkali pretreatment to improve ethanol production35
Polypyrrole-modified bamboo fiber/polylactic acid with enhanced mechanical, the antistatic properties and thermal stability35
Synthesis of a novel P-N flame retardant for preparing flame retardant and durable cotton fabric35
Pyrolysis of peanut shell: Kinetic analysis and optimization of thermal degradation process35
0.058696985244751