Resources Conservation and Recycling

(The TQCC of Resources Conservation and Recycling is 26. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 500 papers]. The publications cover those that have been published in the past four years, i.e., from 2019-09-01 to 2023-09-01.)
Severe air pollution events not avoided by reduced anthropogenic activities during COVID-19 outbreak482
Challenges toward carbon neutrality in China: Strategies and countermeasures459
Targets for a circular economy441
Challenges, opportunities, and innovations for effective solid waste management during and post COVID-19 pandemic395
A critical analysis of the impacts of COVID-19 on the global economy and ecosystems and opportunities for circular economy strategies378
Towards sustainable development through the circular economy—A review and critical assessment on current circularity metrics332
Blockchain for the future of sustainable supply chain management in Industry 4.0315
A brave new world: Lessons from the COVID-19 pandemic for transitioning to sustainable supply and production312
Pro-environmental behaviors through the lens of the theory of planned behavior: A scoping review262
Recycling waste rubber tyres in construction materials and associated environmental considerations: A review241
A Comprehensive Review on Recycled Aggregate and Recycled Aggregate Concrete214
Industry 4.0 and circular economy: Operational excellence for sustainable reverse supply chain performance209
Big data analytics as an operational excellence approach to enhance sustainable supply chain performance209
Improper solid waste management increases potential for COVID-19 spread in developing countries208
Blockchain critical success factors for sustainable supply chain205
Quantification of food waste per product group along the food supply chain in the European Union: a mass flow analysis202
Policies for transitioning towards a circular economy: Expectations from the European Union (EU)202
The impact of low-carbon city construction on ecological efficiency: Empirical evidence from quasi-natural experiments180
A typology of circular economy discourses: Navigating the diverse visions of a contested paradigm174
Circular economy strategies for adaptive reuse of cultural heritage buildings to reduce environmental impacts169
Blockchain technology adoption barriers in the Indian agricultural supply chain: an integrated approach169
Dynamic and causality interrelationships from municipal solid waste recycling to economic growth, carbon emissions and energy efficiency using a novel bootstrapping autoregressive distributed lag161
Environmental behavior in a private-sphere context: Integrating theories of planned behavior and value belief norm, self-identity and habit160
Managing supply chains for sustainable operations in the era of industry 4.0 and circular economy: Analysis of barriers159
Recycling of landfill wastes (tyres, plastics and glass) in construction – A review on global waste generation, performance, application and future opportunities159
The narrative of sustainability and circular economy - A longitudinal review of two decades of research157
Review of critical metal dynamics to 2050 for 48 elements153
Towards a circular economy for plastic packaging wastes – the environmental potential of chemical recycling152
Procurement 4.0 and its implications on business process performance in a circular economy152
Understanding intention and behavior toward sustainable usage of bike sharing by extending the theory of planned behavior148
Digital technologies catalyzing business model innovation for circular economy—Multiple case study148
Blockchain-based life cycle assessment: An implementation framework and system architecture144
Total material requirement for the global energy transition to 2050: A focus on transport and electricity141
Making the circular economy work for human development140
The impact of low-carbon city pilot policy on the total factor productivity of listed enterprises in China139
Recycling sludge on cropland as fertilizer – Advantages and risks138
Effects of agriculture, renewable energy, and economic growth on carbon dioxide emissions: Evidence of the environmental Kuznets curve137
Nutritional and environmental losses embedded in global food waste136
Energy transition and carbon neutrality: Exploring the non-linear impact of renewable energy development on carbon emission efficiency in developed countries132
Global environmental losses of plastics across their value chains128
Environmental performance comparison of bioplastics and petrochemical plastics: A review of life cycle assessment (LCA) methodological decisions126
Structure of the global plastic waste trade network and the impact of China’s import Ban124
Use of steel slag as sustainable construction materials: A review of accelerated carbonation treatment121
Green innovation: Unfolding the relation with environmental regulations and competitiveness118
Identifying sustainable solid waste management barriers in practice using the fuzzy Delphi method117
Industrial agglomeration, technological innovation and carbon productivity: Evidence from China117
Step towards the sustainable toxic dyes removal and recycling from aqueous solution- A comprehensive review116
Public attitudes towards bioplastics – knowledge, perception and end-of-life management115
Copper and critical metals production from porphyry ores and E-wastes: A review of resource availability, processing/recycling challenges, socio-environmental aspects, and sustainability issues115
Barriers and overcoming strategies to supply chain sustainability innovation112
A review of methods and data to determine raw material criticality110
COVID-19 waste management: Effective and successful measures in Wuhan, China110
Valorization of sewage sludge in the fabrication of construction and building materials: A review109
How technological innovation impacts urban green economy efficiency in emerging economies: A case study of 278 Chinese cities109
A qualitative assessment of lithium ion battery recycling processes108
Identifying supply risks by mapping the cobalt supply chain106
Interplay between reverse logistics and circular economy: Critical success factors-based taxonomy and framework105
Recycling and management practices of plastic packaging waste towards a circular economy in South Korea103
Does digital financial inclusion matter for economic growth and environmental sustainability in OBRI economies? An empirical analysis102
Review of high-value food waste and food residues biorefineries with focus on unavoidable wastes from processing102
Metal recovery from waste printed circuit boards: A review for current status and perspectives100
Impact of coronavirus (COVID-19) spread-prevention actions on urban water consumption100
Near-zero-waste processing of low-grade, complex primary ores and secondary raw materials in Europe: technology development trends100
Review of soil heavy metal pollution in China: Spatial distribution, primary sources, and remediation alternatives99
Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes99
Deployment of electric vehicles in China to meet the carbon neutral target by 2060: Provincial disparities in energy systems, CO2 emissions, and cost effectiveness98
Life cycle assessment of recycling options for polylactic acid97
Industry 4.0 for sustainable manufacturing: Opportunities at the product, process, and system levels97
Reuse of hazardous electrolytic manganese residue: Detailed leaching characterization and novel application as a cementitious material96
Spatio-temporal changes in ecosystem service value in response to land-use/cover changes in the Pearl River Delta96
Research on the circular economy: A critique of the field95
Review of life-cycle environmental consequences of waste-to-energy solutions on the municipal solid waste management system94
Zero waste manufacturing: A framework and review of technology, research, and implementation barriers for enabling a circular economy transition in Singapore94
The Green Print: Advancement of Environmental Sustainability in Healthcare93
Toward Sustainable Reuse of Retired Lithium-ion Batteries from Electric Vehicles90
A review of recent developments in catalytic applications of biochar-based materials89
Improving sustainable supply chains performance through operational excellence: circular economy approach89
Driving factors of CO2 emissions and nexus with economic growth, development and human health in the Top Ten emitting countries89
Remanufacturing for the circular economy: Study and evaluation of critical factors88
Towards an Education for the Circular Economy (ECE): Five Teaching Principles and a Case Study88
Legacy additives in a circular economy of plastics: Current dilemma, policy analysis, and emerging countermeasures87
Municipal solid waste landfill siting using an integrated GIS-AHP approach: A case study from Songkhla, Thailand86
Critical metals for electromobility: Global demand scenarios for passenger vehicles, 2015–205086
A new method to evaluate urban resources environment carrying capacity from the load-and-carrier perspective86
Exploring environmental benefits of reuse and recycle practices: A circular economy case study of a modular building86
Lightweight foamed concrete as a promising avenue for incorporating waste materials: A review85
Implementing the circular economy paradigm in the agri-food supply chain: The role of food waste prevention technologies84
Accelerating the energy transition to achieve carbon neutrality84
Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach84
Major metals demand, supply, and environmental impacts to 2100: A critical review84
Factors affecting household food waste among young consumers and actions to prevent it. A comparison among UK, Spain and Italy83
Circular economy implementation in the agricultural sector: Definition, strategies and indicators83
A review of performance assessment methods for construction and demolition waste management83
Critical success and risk factors for circular business models valorising agricultural waste and by-products82
Covid-19 effects on municipal solid waste management: What can effectively be done in the Brazilian scenario?81
Evolutionary game analysis of construction waste recycling management in China80
Comprehensive review on metallurgical recycling and cleaning of copper slag80
A circular economy within the planetary boundaries: Towards a resource-based, systemic approach80
Reverse logistics and the sectoral agreement of packaging industry in Brazil towards a transition to circular economy78
Circular economy in the construction industry: An overview of United States stakeholders’ awareness, major challenges, and enablers77
Recycling waste classification using optimized convolutional neural network77
Evolutionary game analysis on behavioral strategies of multiple stakeholders in E-waste recycling industry77
Digital twins probe into food cooling and biochemical quality changes for reducing losses in refrigerated supply chains77
Solid waste management in China: Policy and driving factors in 2004–201976
From waste to sustainable industry: How can agro-industrial wastes help in the development of new products?76
Analyzing disposition decisions for sustainable reverse logistics: Triple Bottom Line approach75
Do green practices really attract customers? The sharing economy from the sustainable supply chain management perspective75
Tracing global cobalt flow: 1995–201575
Application of waste tire rubber and recycled aggregates in concrete products: A new compression casting approach75
Techno-economic and environmental disassembly planning of lithium-ion electric vehicle battery packs for remanufacturing75
Environmental regulation and its influence on energy-environmental performance: Evidence on the Porter Hypothesis from China's iron and steel industry75
Decomposing the decoupling of CO2 emissions and economic growth in China’s iron and steel industry75
Utilization of industrial and agricultural wastes for productions of sustainable roller compacted concrete pavement mixes containing reclaimed asphalt pavement aggregates74
Technological review on thermochemical conversion of COVID-19-related medical wastes74
Design from recycling: A complex mixed plastic waste case study74
Stocks and flows of polyvinyl chloride (PVC) in China: 1980-205073
Factors influencing ecosystem services in the Pearl River Delta, China: Spatiotemporal differentiation and varying importance73
Concerns and strategies for wastewater treatment during COVID-19 pandemic to stop plausible transmission73
Microplastics in agroecosystems-impacts on ecosystem functions and food chain73
A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet72
Building a circular plastics economy with informal waste pickers: Recyclate quality, business model, and societal impacts72
A review of wastewater irrigation: Environmental implications72
Opportunities and challenges in IoT-enabled circular business model implementation – A case study72
Advances in bio-waste derived activated carbon for supercapacitors: Trends, challenges and prospective72
Towards sustainable recycling processes: Wasted printed circuit boards as a source of economic opportunities71
Environmental life cycle assessment of construction and demolition waste recycling: A case of urban India71
Production of eco-cement exclusively from municipal solid waste incineration residues71
Comparative life cycle analysis for value recovery of precious metals and rare earth elements from electronic waste71
A comprehensive review of biomass based thermochemical conversion technologies integrated with CO2 capture and utilisation within BECCS networks70
Mechanisms of public education influencing waste classification willingness of urban residents69
Utilization of waste concrete recycling materials in self-compacting concrete69
Emergency response to the explosive growth of health care wastes during COVID-19 pandemic in Wuhan, China68
Consumers’ awareness of plastic packaging: More than just environmental concerns68
Why “Circular” doesn't always mean “Sustainable”68
Quantifying greenhouse gas emissions reduction from bike share systems: a model considering real-world trips and transportation mode choice patterns67
Management of next-generation energy using a triple bottom line approach under a supply chain framework67
How to increase maize production without extra nitrogen input66
Identifying the main crops and key factors determining the carbon footprint of crop production in China, 2001–201866
Recycling spent lithium-ion battery as adsorbents to remove aqueous heavy metals: Adsorption kinetics, isotherms, and regeneration assessment66
Spaceship earth's odyssey to a circular economy - a century long perspective66
Carbon footprint of Japanese health care services from 2011 to 201566
Life cycle assessment and costing of wastewater treatment systems coupled to constructed wetlands64
Coupling efficiency measurement and spatial correlation characteristic of water–energy–food nexus in China64
Bioprocessing of spent lithium ion batteries for critical metals recovery – A review63
Global environmental impacts of silver nanoparticle production methods supported by life cycle assessment63
Micro(nano)plastics and terrestrial plants: Up-to-date knowledge on uptake, translocation, and phytotoxicity63
Environmental life cycle assessment of textile bio-recycling – valorizing cotton-polyester textile waste to pet fiber and glucose syrup63
Recyclability of rubber in asphalt roadway systems: A review of applied research and advancement in technology62
Impact of COVID-19 on household waste flows, diversion and reuse: The case of multi-residential buildings in Toronto, Canada62
Techno-economic assessment of mechanical recycling of challenging post-consumer plastic packaging waste62
Assessing scaling effects of circular economy strategies: A case study on plastic bottle closed-loop recycling in the USA PET market61
The overlooked environmental footprint of increasing Internet use61
Application of demolition wastes mixed with crushed glass and crumb rubber in pavement base/subbase61
Challenges and recent developments in supply and value chains of electric vehicle batteries: A sustainability perspective61
The rebound effect on water extraction from subsidising irrigation infrastructure in Australia61
Economic analysis of the disassembling activities to the reuse of electric vehicles Li-ion batteries60
Use of recycled concrete aggregates from precast block for the production of new building blocks: An industrial scale study60
Circular economy enables sustainable consumption and production in multi-level supply chain system60
Green transition pathways for cement industry in China60
Classifying green technologies for sustainable innovation and investment60
Life Cycle Assessment of Lithium-ion Batteries: A Critical Review59
Potential to decarbonize the commercial building operation of the top two emitters by 206059
Contributions of the circular economy to the UN sustainable development goals through sustainable construction59
Development of machine learning - based models to forecast solid waste generation in residential areas: A case study from Vietnam59
Environmental feasibility of secondary use of electric vehicle lithium-ion batteries in communication base stations59
Pilot-scale extraction of iron from flotation tailings via suspension magnetization roasting in a mixture of CO and H2 followed by magnetic separation59
Cross-regional mobility of construction and demolition waste in Australia: An exploratory study59
Rare earth metals from secondary sources: Review of potential supply from waste and byproducts58
Trade impacts of China’s Belt and Road Initiative: From resource and environmental perspectives58
Eco-efficiency assessment of technological innovations in high-grade concrete recycling58
Urban food-energy-water nexus indicators: A review58
"The road to food waste is paved with good intentions": When consumers' goals inhibit the minimization of household food waste58
Recycling pathways for platinum group metals from spent automotive catalyst: A review on conventional approaches and bio-processes58
Enhancing purchase intention in circular economy: An empirical evidence of remanufactured automotive product in Thailand57
Modeling the circular economy in environmentally extended input-output tables: Methods, software and case study57
Government regulation to promote coordinated emission reduction among enterprises in the green supply chain based on evolutionary game analysis57
Invasive plants as potential sustainable feedstocks for biochar production and multiple applications: A review57
Opportunities and challenges associated with using municipal waste incineration ash as a raw ingredient in cement production – a review57
Supply chains in circular business models: processes and performance objectives57
United States plastics: Large flows, short lifetimes, and negligible recycling57
Measuring progress of China's circular economy57
Emerging challenges in urban waste management in Tehran, Iran during the COVID-19 pandemic56
Critical examination of recycled municipal solid waste incineration ash as a mineral source for portland cement manufacture – A case study56
The impact of digital technology development on carbon emissions: A spatial effect analysis for China56
Water-energy nexus within urban agglomeration: An assessment framework combining the multiregional input-output model, virtual water, and embodied energy56
Modelling the global impact of China’s ban on plastic waste imports56
Dissolution mechanism of fly ash to quantify the reactive aluminosilicates in geopolymerisation56
Assessing the determinants of intentions and behaviors of organizations towards a circular economy for plastics55
Utilization of coal fly and bottom ash pellet for phosphorus adsorption: Sustainable management and evaluation55
Analyzing differences between different types of pro-environmental behaviors: Do attitude intensity and type of knowledge matter?55
Rural household food waste characteristics and driving factors in China55
A causal municipal solid waste management model for sustainable cities in Vietnam under uncertainty: A comparison55
Valorization of waste LCD and recovery of critical raw material for circular economy: A review55
Life cycle environmental sustainability of valorisation routes for spent coffee grounds: From waste to resources54
Circular economy: Preserving materials or products? Introducing the Resource States framework54
Highly efficient recovery of platinum, palladium, and rhodium from spent automotive catalysts via iron melting collection54
Public stereotypes of recycled water end uses with different human contact: Evidence from event-related potential (ERP)54
Characteristics, influencing factors, and environmental effects of plate waste at university canteens in Beijing, China54
Microplastics in Mexican beaches54
Exploring nutrient recovery from hydroponics in urban agriculture: An environmental assessment54
Circular fashion: Properties of fabrics made from mechanically recycled poly-ethylene terephthalate (PET) bottles54
Selecting sustainable technologies for disposal of municipal sewage sludge using a multi-criterion decision-making method: A case study from China54
Recycling and consumption reduction following the COVID-19 lockdown: The effect of threat and coping appraisal, past behavior and information53
Impact of the dual-credit policy on improvements in fuel economy and the production of internal combustion engine vehicles53
Circular economy as a COVID-19 cure?53
Challenges and opportunities for scaling up upcycling businesses – The case of textile and wood upcycling businesses in the UK53
There is no sustainable circular economy without a circular society53
Scale effects of vegetation restoration on soil and water conservation in a semi-arid region in China: Resources conservation and sustainable management53
Game-based system dynamics simulation of deposit-refund scheme for electric vehicle battery recycling in China53
COVID-19: A pandemic with positive and negative outcomes on resource and waste flows and stocks52
Public attitudes towards microplastics: Perceptions, behaviors and policy implications52
Plastic bag bans: Lessons from the Australian Capital Territory52
When plastic packaging should be preferred: Life cycle analysis of packages for fruit and vegetable distribution in the Spanish peninsular market52
Framework for quantifying environmental losses of plastics from landfills52
Circularity indicator for residential buildings: Addressing the gap between embodied impacts and design aspects52
Extraction of copper and the co-leaching behaviour of other metals from waste printed circuit boards using alkaline glycine solutions52
Sharing economy to improve routing for urban logistics distribution using electric vehicles51
Sustainable supply chain management trends in world regions: A data-driven analysis51
Potential contributions of wind and solar power to China's carbon neutrality51
From theory to practice: systematising and testing business model archetypes for circular economy50
Energy and water footprints of cereal production in China50
Reuse of copper slag as a supplementary cementitious material: Reactivity and safety50
Are waste hierarchies effective in reducing environmental impacts from food waste? A systematic review for OECD countries50
Forecasting electronic waste flows for effective circular economy planning50
Ecological civilization and government administrative system reform in China50
Determinants of consumer’s intention to purchase authentic green furniture50
Assessing the recycling potential of “unregulated” e-waste in Australia50
Potentials for a circular economy of mineral construction materials and demolition waste in urban areas: a case study from Vienna50
China's energy-related carbon emissions projections for the shared socioeconomic pathways50
Assessment of Plastic Stocks and Flows in China: 1978-201750
Transportation of electric vehicle lithium-ion batteries at end-of-life: A literature review50
Transesterification of Waste Cooking Oil to Produce A Sustainable Rejuvenator for Aged Asphalt49
Buildings and the circular economy: Estimating urban mining, recovery and reuse potential of building components49
Trade-offs and synergies in the water-energy-food nexus: The case of Saskatchewan, Canada49
Bitcoin's growing e-waste problem49
Systemic building blocks for creating and capturing value from circular economy49
Exploring carbon emissions and international inequality in a globalized world: A multiregional-multisectoral perspective49
Effect of crushed concrete waste’s maximum size as partial replacement of natural coarse aggregate on the mechanical and durability properties of concrete49
Vehicle routing problem in cold Chain logistics: A joint distribution model with carbon trading mechanisms49
Materials flow analysis in support of circular economy development: Plastics in Trinidad and Tobago49
Dynamic material flow analysis of critical metals for lithium-ion battery system in China from 2000–201849
Spatiotemporal patterns of industrial carbon emissions at the city level48
Recycling of multi-material multilayer plastic packaging: Current trends and future scenarios48
Critical review of key variables affecting potential recycling applications of ash produced at large-scale biomass combustion plants48
Induction mechanism and optimization of tradable green certificates and carbon emission trading acting on electricity market in China48
A selective disassembly multi-objective optimization approach for adaptive reuse of building components48
Quantifying city-scale carbon emissions of the construction sector based on multi-regional input-output analysis48
Key factors influencing public awareness of household solid waste recycling in urban areas of China: A case study48
Seeing the forest and not the trees: Learning from nature’s circular economy48
Mapping the environmental footprints of nations partnering the Belt and Road Initiative48
Influence of Russia-Ukraine War on the Global Energy and Food Security48
Synergistic effects of fly ash and hooked steel fibers on strength and durability properties of high strength recycled aggregate concrete48
Effective and sustainable use of municipal solid waste incineration bottom ash in concrete regarding strength and durability48
Fundamental thermokinetic study of a sustainable lithium-ion battery pyrometallurgical recycling process47
Consumers’ environmental ethics, willingness, and green consumerism between lower and higher income groups47
Wind turbine blade material in the United States: Quantities, costs, and end-of-life options47
Regional differences in the industrial water use efficiency of China: The spatial spillover effect and relevant factors47
Impacts of local public expenditure on CO2 emissions in Chinese cities: A spatial cluster decomposition analysis47
Microplastic pollution in Chinese urban rivers: The influence of urban factors47
State of the art in recycling waste thermoplastics and thermosets and their applications in construction47
A novel synthesis of lightweight and high-strength green geopolymer foamed material by rice husk ash and ground-granulated blast-furnace slag47
Local food systems and COVID-19: an insight from China47
Transition towards a circular economy at a regional level: A case study on closing biological loops47
Are you an energy saver at home? The personality insights of household energy conservation behaviors based on theory of planned behavior47
Reaction pathways for surface activated rubber particles46
Overview on stress-induced strategies for enhanced microalgae lipid production: Application, mechanisms and challenges46
Will the COVID-19 pandemic change waste generation and composition?: The need for more real-time waste management data and systems thinking46
The effect of corn straw return on corn production in Northeast China: An integrated regional evaluation with meta-analysis and system dynamics46
A dynamic material flow analysis of lithium-ion battery metals for electric vehicles and grid storage in the UK: Assessing the impact of shared mobility and end-of-life strategies46
Compound utilization of construction and industrial waste as cementitious recycled powder in mortar46
Circular economy-induced global employment shifts in apparel value chains: Job reduction in apparel production activities, job growth in reuse and recycling activities46
Carbon reduction potential of China's coal-fired power plants based on a CCUS source-sink matching model46
Sustainable consumption from the consumer’s perspective: Antecedents of solar innovation adoption45
Can global pharmaceutical supply chains scale up sustainably for the COVID-19 crisis?45
System dynamics modelling for improving urban resilience in Beijing, China45
Waste prevention, energy recovery or recycling - Directions for household food waste management in light of circular economy policy45
Regional Water Resources Assessment using Water Scarcity Pinch Analysis45
Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades45
Recycling of natural fiber composites: Challenges and opportunities45
Assessment of water losses in distribution networks: Methods, applications, uncertainties, and implications in intermittent supply45
Waste recycling in ceramic tiles: a technological outlook45
Life cycle assessment of single-use surgical and embedded filtration layer (EFL) reusable face mask45
A comprehensive review on the recycling of discarded printed circuit boards for resource recovery44
Environmental implications of the use of bio-cement treated recycled aggregate in concrete44
Moving from linear to circular household plastic packaging in Belgium: Prospective life cycle assessment of mechanical and thermochemical recycling44
Multilevel modelling of impacts of human and natural factors on ecosystem services change in an oasis, Northwest China44
Building materials in a circular economy: The case of wood waste as CO2-sink in bio concrete44
Addressing resource and waste management challenges imposed by COVID-19: An entrepreneurship perspective44
Recycling steel slag from municipal wastewater treatment plants into concrete applications – A step towards circular economy44
The supply-consumption relationship of ecological resources under ecological civilization construction in China44
Promoting a circular economy in the solar photovoltaic industry using life cycle symbiosis44
Towards ‘gresilient’ supply chain management: A quantitative study43
Expanding perceptions of the circular economy through design: Eight capitals as innovation lenses43
Water reuse for sustainable microalgae cultivation: current knowledge and future directions43
What, where, and how measuring industrial symbiosis: A reasoned taxonomy of relevant indicators43
Evolutionary process of household waste separation behavior based on social networks43
Disruption risks to material supply chains in the electronics sector43
Recycling strategies of spent V2O5-WO3/TiO2 catalyst: A review43
Barriers for green supplier development programs in manufacturing industry43
Cleaner heating in Northern China: potentials and regional balances43
Recyclable waste image recognition based on deep learning43
What medical waste management system may cope With COVID-19 pandemic: Lessons from Wuhan43
Has the Sustainable Development Planning Policy Promoted the Green Transformation in China's Resource-based Cities?43
How can national ETS affect carbon emissions and abatement costs? Evidence from the dual goals proposed by China's NDCs43
The influence of crop and chemical fertilizer combinations on greenhouse gas emissions: A partial life-cycle assessment of fertilizer production and use in China42
Inorganic fluorescent marker materials for identification of post-consumer plastic packaging42
Collaborative innovation and sustainability in the food supply chain- evidence from farmer producer organisations42
Assessment and communication of the environmental performance of construction products in Europe: Comparison between PEF and EN 15804 compliant EPD schemes42
Workability and mechanical properties of mortar containing recycled sand from aerated concrete blocks and sintered clay bricks42
Opportunities and challenges for solid waste reuse and recycling in emerging economies: A hybrid analysis42
Cradle-to-grave life cycle assessment of single-use cups made from PLA, PP and PET42
Would personal carbon trading enhance individual adopting intention of battery electric vehicles more effectively than a carbon tax?42
Food waste prevention along the food supply chain: A multi-actor approach to identify effective solutions42
Do you need a bag? Analyzing the consumption behavior of plastic bags of households in Ecuador42
Material flow analysis for end-of-life lithium-ion batteries from battery electric vehicles in the USA and China42
Temporal and spatial analysis for end-of-life power batteries from electric vehicles in China42
Environmental life cycle assessment of polypropylene made from used cooking oil41
Reuse of phosphogypsum as hemihydrate gypsum: The negative effect and content control of H3PO441
Operational excellence for improving sustainable supply chain performance41
An exploratory study of e-waste creation and disposal: Upstream considerations41
Spatial modeling of a second-use strategy for electric vehicle batteries to improve disaster resilience and circular economy41
Comparative life cycle assessment of a waste to ethanol biorefinery system versus conventional waste management methods41
The prospects of waste management in the hospitality sector post COVID-1941
Spatial econometric analysis of foreign direct investment and carbon productivity in China: Two-tier moderating roles of industrialization development41
Socio-productive inclusion of scavengers in municipal solid waste management in Brazil: Practices, paradigms and future prospects41
Surface activation of scrap tire crumb rubber to improve compatibility of rubberized asphalt41
Artificial alkali-activated aggregates developed from wastes and by-products: A state-of-the-art review41
A Circular Economy Life Cycle Assessment (CE-LCA) model for building components41
Development strategies for heavy duty electric battery vehicles: Comparison between China, EU, Japan and USA41
Behavioral factors on the adoption of sustainable supply chain practices41
Benefits of coupled green and grey infrastructure systems: Evidence based on analytic hierarchy process and life cycle costing41
Improving the production chain with LCA and eco-design: application to cosmetic packaging41
Virtual water scarcity risk in China41
Recycling and utilization of high volume converter steel slag into CO2 activated mortars – The role of slag particle size41
Upcycling waste seashells with cement: Rheology and early-age properties of Portland cement paste40
Plastics recycling after the global pandemic: resurgence or regression?40
An analytical framework to assess SDG targets within the context of WEFE nexus in the Mediterranean region40
Application of Municipal Plastic Waste as a Manmade Neo-construction Material: Issues & Wayforward40
Energy, greenhouse gas, and water life cycle analysis of lithium carbonate and lithium hydroxide monohydrate from brine and ore resources and their use in lithium ion battery cathodes and lithium ion 40
Evaluation of the onshore wind energy potential in mainland China—Based on GIS modeling and EROI analysis40
Ionic liquids: A milestone on the pathway to greener recycling of cellulose from biomass40
Pyrometallurgical removal of zinc from basic oxygen steelmaking dust – A review of best available technology40
A critical review of the recovery of rare earth elements from wastewater by algae for resources recycling technologies40
Circular business models for electric vehicle lithium-ion batteries: An analysis of current practices of vehicle manufacturers and policies in the EU40
Effects of land use and cover change (LUCC) on terrestrial carbon stocks in China between 2000 and 201840
Reuse of waste glass powder in alkali-activated metakaolin/fly ash pastes: Physical properties, reaction kinetics and microstructure40
Comprehensive recycling of silicon photovoltaic modules incorporating organic solvent delamination – technical, environmental and economic analyses40
Pathways to carbon neutrality: Challenges and opportunities40
The future of UK plastics recycling: One Bin to Rule Them All40
Global primary data on consumer food waste: Rate and characteristics – A review40
The expansion of the built environment, waste generation and EU recycling targets on Samothraki, Greece: An island’s dilemma40
Dynamic and environmental performance of eco-friendly ultra-high performance concrete containing waste cathode ray tube glass as a substitution of river sand40
Development and application of an analytical method to quantify odour removal in plastic waste recycling processes39
Addressing the complex challenge of understanding and quantifying substitutability for recycled plastics39
Extended producer responsibility: How to unlock the environmental and economic potential of plastic packaging waste?39
Uncovering the impacts of industrial transformation on low-carbon development in the Yangtze River Delta39
A blending efficiency model for virgin and aged binders in recycled asphalt mixtures based on blending temperature and duration39
Mixture optimization for environmental, economical and mechanical objectives in silica fume concrete: A novel frame-work based on machine learning and a new meta-heuristic algorithm39
Life cycle assessment of food loss and waste in the food supply chain39
Global Electrification of Vehicles and Intertwined Material Supply Chains of Cobalt, Copper and Nickel39
Food-related routines, product characteristics, and household food waste in the United States: A refrigerator-based pilot study39
Separation and purification of platinum group metals from aqueous solution: Recent developments and industrial applications39
Drivers and barriers of electric vehicle usage in Malaysia: A DEMATEL approach39
Life cycle carbon dioxide emissions of bike sharing in China: Production, operation, and recycling39
The effect of waste incineration taxation on industrial plastic waste generation: A panel analysis38
Dry Grinding - Carbonated Ultrasound-Assisted Water Leaching of Carbothermally Reduced Lithium-Ion Battery Black Mass Towards Enhanced Selective Extraction of Lithium and Recovery of High-Value Metals38
Recycling of end-of-life reverse osmosis membranes: Comparative LCA and cost-effectiveness analysis at pilot scale38
A review on the evaluation of the potential utilization of construction and demolition waste in hot mix asphalt pavements38
Hydrothermal treatment of erythromycin fermentation residue: Harmless performance and bioresource properties38
Innovative technologies for recycling End-of-Life concrete waste in the built environment38
Nano-engineered, Fly Ash-Based Geopolymer Composites: An Overview38
The drivers of China’s regional green productivity, 1999–201338
The capital load of global material footprints38
Shared socio-economic pathways and their implications for global materials use38
Critical assessment of renewable energy waste generation in OECD countries: Decommissioned PV panels38
Electronic waste in the Caribbean: An impending environmental disaster or an opportunity for a circular economy?38
Social interaction and the formation of residents′ low-carbon consumption behaviors: An embeddedness perspective38
Intention in use recyclable express packaging in consumers’ behavior: An empirical study38
Improving the resource footprint evaluation of products recovered from wastewater: A discussion on appropriate allocation in the context of circular economy37
A review on chemometric techniques with infrared, Raman and laser-induced breakdown spectroscopy for sorting plastic waste in the recycling industry37
Awareness of food waste recycling in restaurants: evidence from China37
CO2 capture from waste-to-energy plants: Techno-economic assessment of novel integration concepts of calcium looping technology37
Preparing WEEE plastics for recycling – How optimal particle sizes in pre-processing can improve the separation efficiency of high quality plastics37
Data analytics of social media publicity to enhance household waste management37
Effects of urbanization on airport CO2 emissions: A geographically weighted approach using nighttime light data in China37
Measuring the performance of more circular complex product supply chains37
Optimum utilization of waste foundry sand and fly ash for geopolymer concrete synthesis using D-optimal mixture design of experiments37
Identifying the regional disparities of ecosystem services from a supply-demand perspective37
Nested circularity in food systems: A Nordic case study on connecting biomass, nutrient and energy flows from field scale to continent37
Regional comparison of electric vehicle adoption and emission reduction effects in China37
Scarce mineral resources: Extraction, consumption and limits of sustainability37
Evaluating the transition to the circular economy in the agri-food sector: Selection of indicators37
Quantitative sustainability assessment of household food waste management in the Amsterdam Metropolitan Area37
Are the circular economy and economic growth compatible? A case for post-growth circularity37
To shred or not to shred: A comparative techno-economic assessment of lithium ion battery hydrometallurgical recycling retaining value and improving circularity in LIB supply chains37
Socioeconomic drivers of provincial-level changes in the blue and green water footprints in China37
Towards Increased Recovery of Critical Raw Materials from WEEE– evaluation of CRMs at a component level and pre-processing methods for interface optimisation with recovery processes37
Life cycle assessment of water supply in Singapore — A water-scarce urban city with multiple water sources37
The challenges in recycling post-consumer polyolefins for food contact applications: A review37
Relationships between personal values, micro-contextual factors and residents’ pro-environmental behaviors: An explorative study36
Life cycle assessment of plastic waste end-of-life for India and Indonesia36
Quantifying the prevention potential of avoidable food waste in households using a self-reporting approach36
Integrated regional waste management to minimise the environmental footprints in circular economy transition36
Industrial disassembling as a key enabler of circular economy solutions for obsolete electric vehicle battery systems36
Comparison of the effects of incineration, vacuum pyrolysis and dynamic pyrolysis on the composition of NMC-lithium battery cathode-material production scraps and separation of the current collector36
Disruption in Circularity? Impact analysis of COVID-19 on ship recycling using Weibull tonnage estimation and scenario analysis method36
A new approach to recover platinum-group metals from spent catalytic converters via iron matte36
Review and new life cycle assessment for rare earth production from bastnäsite, ion adsorption clays and lateritic monazite36
Total factor energy efficiency in Chinese manufacturing industry under industry and regional heterogeneities36
Regional allocation of renewable energy quota in China under the policy of renewable portfolio standards36
Using the waste Kuznet's curve to explore regional variation in the decoupling of waste generation and socioeconomic indicators36
Revisiting the effects of prefabrication on construction waste minimization: A quantitative study using bigger data36
Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching36
Utilization of off-specification fly ash in preparing ultra-high-performance concrete (UHPC): Mixture design, characterization, and life-cycle assessment36
Garbage classification system based on improved ShuffleNet v235
Towards a more direct policy feedback in circular economy monitoring via a societal needs perspective35
Literature review on policies to mitigate GHG emissions for cement and concrete35
Assessment of circular economy for global sustainability using an integrated model35
Do monetary and non-monetary incentives influence environmental attitudes and behavior? Evidence from an experimental analysis35
Understanding choice behavior towards plastic consumption: An emerging market investigation35
Investigating factors influencing decision-makers’ intention to adopt Green IT in Malaysian manufacturing industry35
Material flow analysis of alternative biorefinery systems for managing Chinese food waste35
Comparative life-cycle assessment of pyrolysis processes for producing bio-oil, biochar, and activated carbon from sewage sludge35
No time to waste: assessing the performance of food waste prevention actions35
A GIS-based multi-criteria decision making method for the potential assessment and suitable sites selection of PV and CSP plants35
A data driven technique applying GIS, and remote sensing to rank locations for waste disposal site expansion35
Recycling of post-consumer multilayer Tetra Pak® packaging with the Selective Dissolution-Precipitation process35
Friend or foe: Stakeholder attitudes towards biodegradable plastic packaging in food waste anaerobic digestion35
Metrics for quantifying the circularity of bioplastics: The case of bio-based and biodegradable mulch films35
Thermochemically driven crystal phase transfer via chlorination roasting toward the selective extraction of lithium from spent LiNi1/3Co1/3Mn1/3O235
Water resource synergy management in response to climate change in China: From the perspective of urban metabolism35
On-farm food loss in northern and central California: Results of field survey measurements34
Developing an indicator for material selection based on durability and environmental footprint: A Circular Economy perspective34
Hydrometallurgical metal recovery from waste printed circuit boards pretreated by microwave pyrolysis34
Towards a value stream perspective of circular business models34
Towards more flexibility and transparency in life cycle inventories for Lithium-ion batteries34
How labour-intensive is the circular economy? A policy-orientated structural analysis of the repair, reuse and recycling activities in the European Union34
Understanding the role of waste cooking oil residue during the preparation of rubber asphalt34
Characterization of end-of-life LED lamps for the recovery of precious metals and rare earth elements34
What are the roles of green technology innovation and ICT employment in lowering carbon intensity in China? A city-level analysis of the spatial effects34
Estimation of the quantity and availability of forestry residue for bioenergy production in China34
Carbon emission trends and sustainability options in Austrian health care34
Environmental impact of discarded apparel landfilling and recycling34
Pathways towards regional circular economy evaluated using material flow analysis and system dynamics34
A review of membrane crystallization, forward osmosis and membrane capacitive deionization for liquid mining34
A sustainable process for selective recovery of lithium as lithium phosphate from spent LiFePO4 batteries33
How recycling mitigates supply risks of critical raw materials: Extension of the geopolitical supply risk methodology applied to information and communication technologies in the European Union33
Copper at the crossroads: Assessment of the interactions between low-carbon energy transition and supply limitations33
The nexus of water-energy-food in China's tourism industry33
Development of zero cement composite for the protection of concrete sewage pipes from corrosion and fatbergs33
Sustainable cycles and management of plastics: A brief review of RCR publications in 2019 and early 202033
Simultaneous water and energy integration with isothermal and non-isothermal mixing – A P-graph approach33
A circular economy life cycle costing model (CE-LCC) for building components33
Machine vision estimates the polyester content in recyclable waste textiles33
A framework for sustainable and circular system design: Development and application on thermal insulation materials33
Virgin or recycled? Optimal pricing of 3D printing platform and material suppliers in a closed-loop competitive circular supply chain33
Separation of lithium, nickel, manganese, and cobalt from waste lithium-ion batteries using electrodialysis33
Approaches to integrate sustainable materials management into waste management planning and policy33
An innovative biotechnology for metal recovery from printed circuit boards33
Environmental impacts of plastic packaging of food products33
CO2 emission reduction potential in China from combined effects of structural adjustment of economy and efficiency improvement32
A green method for the simultaneous recovery of phosphate and potassium from hydrolyzed urine as value-added fertilizer using wood waste32
Upcycling of non-ferrous metallurgy slags: Identifying the most reactive slag for inorganic polymer construction materials32
Cost-effective management of coastal eutrophication: A case study for the Yangtze river basin32
Simulation-based life cycle assessment for hydrometallurgical recycling of mixed LIB and NiMH waste32
Consumers’ sustainability-related perception of and willingness-to-pay for food packaging alternatives32
Structural reuse of high end composite products: A design case study on wind turbine blades32
A review of bioplastics at end-of-life: Linking experimental biodegradation studies and life cycle impact assessments32
Sensitivity analysis and spatial-temporal heterogeneity of CO2 emission intensity: Evidence from China32
One-step selective recovery and cyclic utilization of valuable metals from spent lithium-ion batteries via low-temperature chlorination pyrolysis32
Directional spatial spillover effects and driving factors of haze pollution in North China Plain32
The carbon footprint of general anaesthetics: A case study in the UK32
Supply chain integration strategies and circularity in the European steel industry31
Multi-stage stochastic fuzzy random programming for food-water-energy nexus management under uncertainties31
Analyzing challenges for sustainable supply chain of electric vehicle batteries using a hybrid approach of Delphi and Best-Worst Method31
Electric vehicles lithium-ion batteries reverse logistics implementation barriers analysis: A TISM-MICMAC approach31
Limits to circular bioeconomy in the transition towards decentralized biowaste management systems31
End-of-life management of solar photovoltaic and battery energy storage systems: A stakeholder survey in Australia31
The impact of the urban digital economy on China's carbon intensity: Spatial spillover and mediating effect31
Recycling spent water treatment adsorbents for efficient electrocatalytic water oxidation reaction31
A2O-MBR as an efficient and profitable unconventional water treatment and reuse technology: A practical study in a green building residential community31
Environmental sustainability and footprints of global aquaculture31
Food-centric interlinkages in agricultural food-energy-water nexus under climate change and irrigation management31
Environmental effects of sustainability-oriented diet transition in China31
Robust optimization-based dynamic power generation mix evolution under the carbon-neutral target31
Factors influencing municipal recycling in the Global South: The case of Chile31
Flows of post-consumer plastic packaging in Germany: An MFA-aided case study31
Supply chain implications of industrial symbiosis: A review and avenues for future research31
Public perception matters: Individual waste sorting in Chinese communities31
Trends in the food nitrogen and phosphorus footprints for Asia's giants: China, India, and Japan31
The role of technological innovation in plastic production within a circular economy framework31
Advances towards circular economy policies in the EU: The new Ecodesign regulation of enterprise servers30
Does the COVID-19 external shock matter on household food waste? The impact of social distancing measures during the lockdown30
Household solid waste characterization in Tandil (Argentina): Socioeconomic, institutional, temporal and cultural aspects influencing waste quantity and composition30
Analysis for recycling and remanufacturing strategies in a supply chain considering consumers’ heterogeneous WTP30
From toilet to agriculture: Fertilization with microalgal biomass from wastewater impacts the soil and rhizosphere active microbiomes, greenhouse gas emissions and plant growth30
Comparative life cycle energy analysis of carbon fibre pre-processing, processing and post-processing recycling methods30
Electrochemical-assisted leaching of active materials from lithium ion batteries30
RSM-based optimized mix design of recycled aggregate concrete containing supplementary cementitious materials based on waste generation and global warming potential30