Journal of Biomaterials Science-Polymer Edition

Papers
(The median citation count of Journal of Biomaterials Science-Polymer Edition is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
PEGYLATION: an important approach for novel drug delivery system59
Preparation and characterization of PLGA-PEG-PLGA polymeric nanoparticles for co-delivery of 5-Fluorouracil and Chrysin57
A review on the synthesis and properties of hydroxyapatite for biomedical applications51
High strength polyvinyl alcohol/polyacrylic acid (PVA/PAA) hydrogel fabricated by Cold-Drawn method for cartilage tissue substitutes34
pH-sensitive curcumin conjugated micelles for tumor triggered drug delivery32
Eco-friendly nanocellulose and its biomedical applications: current status and future prospect30
Dendrimer as a promising nanocarrier for the delivery of doxorubicin as an anticancer therapeutics29
Solubility enhancement, formulation development and antifungal activity of luliconazole niosomal gel-based system28
Biomimetic hybrid scaffold of electrospun silk fibroin and pancreatic decellularized extracellular matrix for islet survival27
Enhancement of hydrophilicity, biocompatibility and biodegradability of poly(ε-caprolactone) electrospun nanofiber scaffolds using poly(ethylene glycol) and poly(L-lactide-co-ε-caprolactone-co-glycoli27
Gentamicin encapsulated within a biopolymer for the treatment of Staphylococcus aureus and Escherichia coli infected skin ulcers27
Natural Polymeric Scaffolds for Tissue Engineering Applications27
Biomimetic polyvinyl alcohol/type II collagen hydrogels for cartilage tissue engineering26
Skin wounds, the healing process, and hydrogel-based wound dressings: a short review26
Polymeric biomaterials for wound healing applications: a comprehensive review25
Formulation development, optimization, and in vitro assessment of thermoresponsive ophthalmic pluronic F127-chitosan in situ tacrolimus gel25
Chitosan-based nanoparticles as delivery-carrier for promising antimicrobial glycolipid biosurfactant to improve the eradication rate of Helicobacter pylori biofilm25
Methacrylated pullulan/polyethylene (glycol) diacrylate composite hydrogel for cartilage tissue engineering23
Antibacterial effect against both Gram-positive and Gram-negative bacteria via lysozyme imprinted cryogel membranes22
Application of electrospun nanofibers in bone, cartilage and osteochondral tissue engineering22
Crosslinked nanogel-based porous hydrogel as a functional scaffold for tongue muscle regeneration21
Recent advances in polymer scaffolds for biomedical applications20
A core-shell structured alginate hydrogel beads with tunable thickness of carboxymethyl cellulose coating for pH responsive drug delivery20
Optimally controlled morphology and physico-mechanical properties of inclusion complex loaded electrospun polyvinyl alcohol based nanofibrous mats for therapeutic applications20
Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites20
Mechanical strong stretchable conductive multi-stimuli-responsive nanocomposite double network hydrogel as biosensor and actuator20
Gelatin coating promotes in situ endothelialization of electrospun polycaprolactone vascular grafts19
Fabrication and assessment of folic acid conjugated-chitosan modified PLGA nanoparticle for delivery of alpha terpineol in colon cancer19
Polymer-based nano-therapies to combat COVID-19 related respiratory injury: progress, prospects, and challenges19
Formulation and evaluation of thermosensitive flurbiprofen in situ nano gel for the ocular delivery19
A review on the recent progress, opportunities, and challenges of 4D printing and bioprinting in regenerative medicine18
Electroactive polymeric nanocomposite BC-g-(Fe3O4/GO) materials for bone tissue engineering: in vitro evaluations18
Anti-biofouling assembly strategies for protein & cell repellent surfaces: a mini-review17
Preparation, characterization, and in vitro drug release behavior of thiolated alginate nanoparticles loaded budesonide as a potential drug delivery system toward inflammatory bowel diseases17
Development of a Biocompatible PLGA Polymers Capable to Release Thrombolytic Enzyme Prourokinase17
A brief review concerning the latest advances in the influence of nanoparticle reinforcement into polymeric-matrix biomaterials17
Degradable porous carboxymethyl chitin hemostatic microspheres17
Preparation of silk fibroin/hyaluronic acid hydrogels with enhanced mechanical performance by a combination of physical and enzymatic crosslinking17
Microspheres containing biosynthesized silver nanoparticles with alginate-nano hydroxyapatite for biomedical applications17
Molecularly imprinted bacterial cellulose for sustained-release delivery of quercetin16
Hyaluronic acid and graphene oxide loaded silicon contact lens for corneal epithelial healing16
A short review on chitosan and gelatin-based hydrogel composite polymers for wound healing16
Multi-stimuli-responsive, liposome-crosslinked poly(ethylene glycol) hydrogels for drug delivery16
Physicomechanical performance and encapsulation efficiency of β-cyclodextrin loaded functional electrospun mats based on aliphatic polyesters and their blends16
Self-crosslinked keratin nanoparticles for pH and GSH dual responsive drug carriers16
Recent advances in nanotechnology based combination drug therapy for skin cancer15
Microparticulate and nanotechnology mediated drug delivery system for the delivery of herbal extracts15
An insight of nanogels as novel drug delivery system with potential hybrid nanogel applications15
Synergistic photodynamic and photothermal therapy of BODIPY-conjugated hyaluronic acid nanoparticles15
Ternary nano-biocomposite films using synergistic combination of bacterial cellulose with chitosan and gelatin for tissue engineering applications15
Molecularly imprinted polymer integrated plasmonic nanosensor for cocaine detection15
Microstructured titanium functionalized by naringin inserted multilayers for promoting osteogenesis and inhibiting osteoclastogenesis14
Interconnected porous nanofibrous gelatin scaffolds prepared via a combined thermally induced phase separation/particulate leaching method14
Synthetic/natural blended polymer fibrous meshes composed of polylactide, gelatin and glycosaminoglycan for cartilage repair14
Evaluation of Nigella sativa oil loaded electrospun polyurethane nanofibrous mat as wound dressing14
Preparation of lysozyme loaded gelatin microcryogels and investigation of their antibacterial properties14
Preparation and characterization of Keratin-PEG conjugate-based micelles as a tumor microenvironment-responsive drug delivery system14
Effect of cellulose nanocrystals on chitosan/PVA/nano β-TCP composite scaffold for bone tissue engineering application13
PVP-microneedle array for drug delivery: mechanical insight, biodegradation, and recent advances13
Introducing a flexible drug delivery system based on poly(glycerol sebacate)-urethane and its nanocomposite: potential application in the prevention and treatment of oral diseases13
Bacteria-targeting chitosan/carbon dots nanocomposite with membrane disruptive properties improve eradication rate of Helicobacter pylori13
Antiproliferative drug-loaded multi-functionalized intraocular lens for reducing posterior capsular opacification13
Decellularized inner body membranes for tissue engineering: A review13
Formulation development and characterization of lumefantrine nanosuspension for enhanced antimalarial activity13
Environment friendly superhydrophobic and transparent surface coating via layer-by-layer self-assembly for antifogging of optical lenses13
Comparison of surface properties, cell behaviors, bone regeneration and osseointegration between nano tantalum/PEEK composite and nano silicon nitride/PEEK composite12
PLinaS-g-PEG coated magnetic nanoparticles as a contrast agent for hepatocellular carcinoma diagnosis12
Synthesis and characterization of a PAMAM dendrimer nanocarrier functionalized by HA for targeted gene delivery systems and evaluation in vitro12
Tunable chitosan-calcium phosphate composites as cell-instructive dental pulp capping agents12
Glucose-sensitive delivery of tannic acid by a photo-crosslinked chitosan hydrogel film for antibacterial and anti-inflammatory therapy12
Multifunctional modified polylactic acid nanofibrous scaffold incorporating sodium alginate microspheres decorated with strontium and black phosphorus for bone tissue engineering12
Cotton pulp for bone tissue engineering12
Synthesis and characterization of PLGA-PEG-PLGA based thermosensitive polyurethane micelles for potential drug delivery11
Development of a novel polycaprolactone based composite membrane for periodontal regeneration using spin coating technique11
Mucoadhesive microspheres of glutaraldehyde crosslinked mucilage of Isabgol husk for sustained release of gliclazide11
Sustained release of tulobuterol from graphene oxide laden hydrogel to manage asthma11
Silk sericin/fibroin electrospinning dressings: a method for preparing a dressing material with high moisture vapor transmission rate11
3D PCL/fish collagen composite scaffolds incorporating osteogenic abalone protein hydrolysates for bone regeneration application: in vitro and in vivo studies11
Sustained bimatoprost release using gold nanoparticles laden contact lenses11
Heparin conjugated PCL/Gel – PCL/Gel/n-HA bilayer fibrous membrane for potential regeneration of soft and hard tissues11
Fabrication and evaluation of hesperidin loaded polyacrylonitrile/polyethylene oxide nanofibers for wound dressing application11
The antioxidant and antibacterial properties of chitosan encapsulated with the bee pollen and the apple cider vinegar11
Comparative review of piezoelectric biomaterials approach for bone tissue engineering11
In vitro anti-inflammatory potential of marine macromolecules cross-linked bio-composite scaffold on LPS stimulated RAW 264.7 macrophage cells for cartilage tissue engineering appli11
An insight on topically applied formulations for management of various skin disorders10
Cancer cell membrane-coated biomimetic platform for targeted therapy of breast cancer in an orthotopic mouse model10
Flurbiprofen-loaded interpenetrating polymer network beads based on alginate, polyvinyl alcohol and methylcellulose: design, characterization and in-vitro evaluation10
Polyelectrolytic gelatin nanoparticles as a drug delivery system for the promastigote form of Leishmania amazonensis treatment10
Optimization of propofol loaded niosomal gel for transdermal delivery10
Thermoplastic starch nanocomposites: sources, production and applications – a review10
Potential of pectin for biomedical applications: a comprehensive review10
Tumor microenvironment responsive nanogels as a smart triggered release platform for enhanced intracellular delivery of doxorubicin10
Significant biopolymers and their applications in buccal mediated drug delivery10
Recent advances in multifunctional dendrimer-based nanoprobes for breast cancer theranostics10
Supramolecular nanogels based on gelatin–cyclodextrin-stabilized silver nanocomposites with antibacterial and anticancer properties10
Keratin-tannic acid complex nanoparticles as pH/GSH dual responsive drug carriers for doxorubicin10
Enhancing the solubility of nitazoxanide with solid dispersions technique: formulation, evaluation, and cytotoxicity study10
Preparation, characterization and biological evaluation of silver nanoparticles and drug loaded composites for wound dressings formed from Lallemantia royleana seeds’ mucilage10
Gelatin-based electrospun and lyophilized scaffolds with nano scale feature for bone tissue engineering application: review10
A difunctional Pluronic®127-basedin situformed injectable thermogels as prolonged and controlled curcumin depot, fabrication,in vitrocharacterization andin vivosafety e10
Designed and fabrication of triple-layered vascular scaffold with microchannels10
Enhanced efficacy of transforming growth factor-β1 loaded an injectable cross-linked thiolated chitosan and carboxymethyl cellulose-based hydrogels for cartilage tissue engineering10
Lipid-based nanocarrier mediated CRISPR/Cas9 delivery for cancer therapy10
Synthesis and properties of porous piezoelectric BT/PHBV composite scaffold10
Experimental study on bone defect repair by BMSCs combined with a light-sensitive material: g-C3N4/rGO10
BSA loaded bead-on-string nanofiber scaffold with core-shell structure applied in tissue engineering10
Bioinks—materials used in printing cells in designed 3D forms9
Polycaprolactone-gelatin membrane as a sealant biomaterial efficiently prevents postoperative anastomotic leakage with promoting tissue repair9
The controlled release, bioactivity and osteogenic gene expression of Quercetin-loaded gelatin/tragacanth/ nano-hydroxyapatite bone tissue engineering scaffold9
Tumor-targeting and imaging micelles for pH-triggered anticancer drug release and combined photodynamic therapy9
Acetal-linked polymeric prodrug micelles based on aliphatic polycarbonates for paclitaxel delivery: preparation, characterization, in vitro release and anti-proliferation effects9
BSA nanoparticles loaded-methylene blue for photodynamic antimicrobial chemotherapy (PACT): effect on both growth and biofilm formation byCandida albicans9
Hydrosoluble collagen based biodegradable hybrid hydrogel for biomedical scaffold9
Synthesis ofMoringa oleiferacoated silver-containing nanocomposites of a new methacrylate polymer having pendant fluoroarylketone by hydrothermal technique and investigation of thermal, optical9
In vitro evaluation of curcumin-loaded chitosan-coated hydroxyapatite nanocarriers as a potential system for effective treatment of cancer9
Characterization, antioxidant activity, and biocompatibility of selenium nanoparticle-loaded thermosensitive chitosan hydrogels9
Stealth PEGylated chitosan polyelectrolyte complex nanoparticles as drug delivery carrier9
Physico-mechanical and biological evaluation of heparin/VEGF-loaded electrospun polycaprolactone/decellularized rat aorta extracellular matrix for small-diameter vascular grafts9
Ofloxacin laden microemulsion contact lens to treat conjunctivitis9
Enhancing antifouling property of PVA membrane by grafting zwitterionic polymer via SI-ATRP method9
Preparation and modeling of electrospun polyhydroxybutyrate/polyaniline composite scaffold modified by plasma and printed by an inkjet method and its cellular study9
Dual-encapsulated biodegradable 3D scaffold from liposome and waterborne polyurethane for local drug control release in breast cancer therapy9
A review on surface modification methods of poly(arylsulfone) membranes for biomedical applications9
Fabrication of homogeneously-aligned nano-fillers encapsulated silk fibroin electrospun nanofibers for improved fibroblast attachment, epithelialization, and collagen depositions: in vitro and 9
Collagen-coated silk fibroin nanofibers with antioxidants for enhanced wound healing9
Engineered bone tissues using biomineralized gelatin methacryloyl/sodium alginate hydrogels9
Tannic acid-crosslinked O-carboxymethyl chitosan hydrogels for enhanced antibacterial activity and rapid hemostasis9
Graphene oxide-reinforced pectin/chitosan polyelectrolyte complex scaffolds9
Preparation and characterization of a novel polysialic acid/gelatin composite hydrogels cross-linked by tannic acid to improve wound healing after cesarean section dressing9
Injectable hydroxypropyl chitin hydrogels embedded with carboxymethyl chitin microspheres prepared via a solvent-free process for drug delivery9
Cytocompatible scaffolds of poly(L-lactide)/reduced graphene oxide for tissue engineering9
Recent update on nano-phytopharmaceuticals in the management of diabetes8
PEI-modified diatomite/chitosan composites as bone tissue engineering scaffold for sustained release of BMP-28
The thermal/pH-sensitive drug delivery system encapsulated by PAA based on hollow hybrid nanospheres with two silicon source8
Wound healing performance of PVA/PCL based electrospun nanofiber incorporated green synthetized CuNPs andQuercus infectoriaextracts8
Development of hydrogel-forming microneedles for transdermal delivery of albendazole from liquid reservoir8
Hybrid double-network hydrogel for highly stretchable, excellent sensitive, stabilized, and transparent strain sensors8
Development and physicochemical analysis of genipin-crosslinked gelatine sponge as a potential resorbable nasal pack8
Peptide-enabled receptor-binding-quantum dots for enhanced detection and migration inhibition of cancer cells8
A xanthene derivative, free or associated to nanoparticles, as a new potential agent for anticancer photodynamic therapy8
The bactericidal potential of LLDPE with TiO2/ZnO nanocomposites against multidrug resistant pathogens associated with hospital acquired infections8
Simvastatin enhanced antimicrobial effect of Ag+ against E. faecalis infection of dentine through PLGA co-delivery submicron particles8
Keratin-dopamine conjugate nanoparticles as pH/GSH dual responsive drug carriers8
Polyelectrolytic BSA nanoparticles containing silicon dihydroxide phthalocyanine as a promising candidate for drug delivery systems for anticancer photodynamic therapy8
3D printing silk-gelatin-propanediol scaffold with enhanced osteogenesis properties through p-Smad1/5/8 activated Runx2 pathway8
A dual pH and redox-responsive Ag/AgO/carboxymethyl chitosan composite hydrogel for controlled dual drug delivery8
In situ synthesis and characterization of colloidal AuNPs capped nano-chitosan containing poly(2,5-dimethoxyaniline) nanocomposites for biomedical applications8
Heparin mimics and fibroblast growth factor-2 fabricated nanogold composite in promoting neural differentiation of mouse embryonic stem cells8
PVP Surface-protected silica coated iron oxide nanoparticles for MR imaging application8
Drug-loaded PLCL/PEO-SA bilayer nanofibrous membrane for controlled release8
Novel electrospun conduit based on polyurethane/collagen enhanced by nanobioglass for peripheral nerve tissue engineering8
Multi-layer PDMS films having antifouling property for biomedical applications8
Co-delivery of cisplatin and doxorubicin by carboxylic acid functionalized poly (hydroxyethyl methacrylate)/reduced graphene nanocomposite for combination chemotherapy of breast cancer cells8
PEG-containing siloxane materials by metal-free click-chemistry for ocular drug delivery applications8
Regeneration of annulus fibrosus tissue using a DAFM/PECUU-blended electrospun scaffold7
Improvement of anti-biofilm activities via co-delivery of curcumin and gentamicin in lipid-polymer hybrid nanoparticle7
Natural latex serum: characterization and biocompatibility assessment using Galleria mellonella as an alternative in vivo model7
Endowing polyetheretherketone with anti-inflammatory ability and improved osteogenic ability7
Boosting osteogenic potential and bone regeneration by co-cultured cell derived extracellular matrix incorporated porous electrospun scaffold7
Kiwi extract-incorporated poly(ɛ-caprolactone)/cellulose acetate blend nanofibers for healing acceleration of burn wounds7
Dexamethasone- loaded polymeric porous sponge as a direct pulp capping agent7
Cryogenic 3D printing of modified polylactic acid scaffolds with biomimetic nanofibrous architecture for bone tissue engineering7
Osteoconductive and osteoinductive biodegradable microspheres serving as injectable micro-scaffolds for bone regeneration7
Green formulation, characterization, antifungal and biological safety evaluation of terbinafine HCl niosomes and niosomal gels manufactured by eco-friendly green method7
An overview of translational research in bone graft biomaterials7
Green preparation, characterization, evaluation of anti-melanogenesis effect and in vitro/in vivo safety profile of kojic acid hydrogel as skin lightener formulation7
Evaluation of PEEK-TiO2- SiO2 nanocomposite as biomedical implants with regard to in-vitro biocompatibility and material characterization7
Biocompatible and photocrosslinkable poly(ethylene glycol)/keratin biocomposite hydrogels7
Transdermal delivery of buprenorphine from reduced graphene oxide laden hydrogel to treat osteoarthritis7
Biopolymeric nanocarrier: an auspicious system for oral delivery of insulin7
Long-term antibacterial activity and cytocompatibility of novel low-shrinkage-stress, remineralizing composites7
Hydrophobin-enhanced stability, dispersions and release of curcumin nanoparticles in water7
In vitro study on electrospun lecithin-based poly (L-lactic acid) scaffolds and their biocompatibility7
Dual functional carbonate-hydroxyapatite nanocomposite from Pinctada maxima and egg-white for bone tissue engineering7
Engineering of 177Lu-labeled gold encapsulated into dendrimeric nanomaterials for the treatment of lung cancer7
VEGF loaded porcine decellularized adipose tissue derived hydrogel could enhance angiogenesis in vitro and in vivo7
Low deacetylation degree chitosan oligosaccharide protects against IL-1β induced inflammation and enhances autophagy activity in human chondrocytes7
Fabrication of thrombin loaded TEMPO-oxidized cellulose nanofiber-gelatin sponges and their hemostatic behavior in rat liver hemorrhage model7
In vitro bio-interaction responses and hemocompatibility of nano-based linear low-density polyethylene polymer embedded with heterogeneous TiO2/ZnO nanocomposites for biomedical appl7
The non-specific antiviral activity of polysulfates to fight SARS-CoV-2, its mutants and viruses with cationic spikes7
Multi-responsive on-demand drug delivery PMMA-co-PDEAEMA platform based on CO2, electric potential, and pH switchable nanofibrous membranes7
Enhanced transfection efficiency of low generation PAMAM dendrimer conjugated with the nuclear localization signal peptide derived from herpesviridae7
Synergistic effect of ZnO nanoparticles and hesperidin on the antibacterial properties of chitosan7
Fabrication of doxorubicin conjugated methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) nanoparticles and study on their in vitro antitumor activities7
Porous aligned ZnSr-doped β-TCP/silk fibroin scaffolds using ice-templating method for bone tissue engineering applications6
The preparation of multifunction chitosan adhesive hydrogel by “one- step” method6
Wound healing and antibacterial capability of electrospun polyurethane nanofibers incorporating Calendula officinalis and Propolis extracts6
Recent advances of polymer based nanosystems in cancer management6
Aloe Vera coated Dextran Sulfate/Chitosan nanoparticles (Aloe Vera @ DS/CS) encapsulating Eucalyptus essential oil with antibacterial potent property6
Efficient synthesis strategy of folate-modified carboxymethyl chitosan/CaCO3 hybrid nanospheres and their drug-carrying and sustained release properties6
Design and fabrication of polyvinylidene fluoride-graphene oxide/gelatine nanofibrous scaffold for cardiac tissue engineering6
Preparation and characterization of polyamidoamine dendrimers conjugated with cholesteryl-dipeptide as gene carriers in HeLa cells6
Effect of a new modified polyamidoamine dendrimer biomimetic system on the mineralization of type I collagen fibrils: an in vitro study6
Antibacterial, cytotoxicity and biodegradability studies of polycaprolactone nanofibers holding green synthesized Ag nanoparticles using atropa belladonna extract6
A microfluidic system based on the monoclonal antibody BCMab1 specifically captures circulating tumor cells from bladder cancer patients6
A preliminary study on polycaprolactone and gelatin-based bilayered tubular scaffolds with hierarchical pore size constructed from nano and microfibers for vascular tissue engineering6
Clindamycin releasing bionanocomposite hydrogels as potential wound dressings for the treatment of infected wounds6
Different influence of sulfated chitosan with different sulfonic acid group sites on HUVECs behaviors6
Facile synthesis of metal nanoparticle-loaded polymer nanocomposite with highly efficient an optically enhanced biocidal and anticancer agents6
Review on 3D printing in dentistry: conventional to personalized dental care6
Gelatin nanoparticles via template polymerization for drug delivery system to photoprocess application in cells6
Metformin loaded injectable silk fibroin microsphere for the treatment of spinal cord injury6
Cellular attachment behavior on biodegradable polymer surface immobilizing endothelial cell-specific peptide6
Rosemary oil low energy nanoemulsion: optimization, µrheology, in silico, in vitro, and ex vivo characterization6
Fabrication of silk fibroin film enhanced by acid hydrolyzed silk fibroin nanowhiskers to improve bacterial inhibition and biocompatibility efficacy6
A 20-year patent review and innovation trends on hydrogel-based coatings used for medical device biofabrication6
In vitro biocompatibility study of EDC/NHS cross-linked silk fibroin scaffold with olfactory ensheathing cells6
Fucoidan-based hydrogels particles as versatile carriers for diabetes treatment strategies6
Transformation of acellular dermis matrix with dicalcium phosphate into 3D porous scaffold for bone regeneration6
Hydroxyapatite-collagen nanoparticles reinforced polyanhydride based injectable paste for bone substitution: effect of dopant addition in vitro6
Platelet-biomimetic nanoparticles for in vivo targeted photodynamic therapy of breast cancer6
Recent update of 3D printing technology in pharmaceutical formulation development6
Development and evaluation of hyaluronan nanocomposite conduits for neural tissue regeneration6
Transferrin/folate dual-targeting Pluronic F127/poly(lactic acid) polymersomes for effective anticancer drug delivery6
Tuning structural-response of PLA/PCL based electrospun nanofibrous mats: Role of dielectric-constant and electrical-conductivity of the solvent system6
Nanofabrication of PLGA-PEG-chitosan-folic acid systems for delivery of colchicine to HT-29 cancer cells5
Regenerated silk fibroin loaded with natural additives: a sustainable approach towards health care5
Targeted delivery and anticancer effects of Chrysin-loaded chitosan-folic acid coated solid lipid nanoparticles in pancreatic malignant cells5
Setting behavior, apatite-forming ability, mechanical strength of polymethylmethacrylate bone cement through bioactivity modification of phosphate functional groups combined with Ca2+ ions5
A PMMA bone cement with improved antibacterial function and flexural strength5
The non-viral vectors and main methods of loading siRNA onto the titanium implants and their application5
Grafting, characterization and enhancement of therapeutic activity of berberine loaded PEGylated PAMAM dendrimer for cancerous cell5
A preliminary study on surface bioactivation of polyaryletherketone by UV-grafting with PolyNaSS: influence on osteogenic and antibacterial activities5
Collagen/Nigella sativa/chitosan inscribed electrospun hybrid bio-nanocomposites for skin tissue engineering5
Curcumin loaded hydrogel with anti-inflammatory activity to promote cartilage regeneration in immunocompetent animals5
Self-assembled magnetic polymeric micelles for delivery of quercetin: Toxicity evaluation on isolated rat liver mitochondria5
Folic acid engineered sulforaphane loaded microbeads for targeting breast cancer5
Preparation of 5-fluorouracil loaded chitosan microtube via in situ precipitation for glaucoma drainage device application: in vitro and in vivo investigation5
The study of mechanical and drug release properties of the mineralized collagen/polylactic acid scaffold by tuning the crystalline structure of polylactic acid5
Mussel-inspired self-healing hydrogel based on gelatin and oxidized tannic acid for pH-responsive controlled drug release5
Novel fabrication of dual nanoparticle loaded-co-polymeric dressing for effective healing efficiency in wound care after fracture surgery5
Preparation, characterization and application of curcumin based polymeric bio-composite for efficient removal of endotoxins and bacterial cells from therapeutic preparations5
Recent advances in microbeads-based drug delivery system for achieving controlled drug release5
Antitumor activity associated with hyperthermia and 4-nitrochalcone loaded in superparamagnetic poly(thioether-ester) nanoparticles5
Effect of membrane parameters and filter structure on the efficiency of leukocyte removal by electrospun poly(ethylene-co-vinyl alcohol) membranes5
Tissue engineering to treat pelvic organ prolapse5
PH and redox dual-responsive polymeric micelles with charge conversion for paclitaxel delivery5
In vitro characterization of hierarchical 3D scaffolds produced by combining additive manufacturing and thermally induced phase separation5
Preparation and characterization of a new sustainable bio-based elastomer nanocomposites containing poly(glycerol sebacate citrate)/chitosan/n-hydroxyapatite for promising tissue engineering applicati5
Synthesis and characterization of biphasic calcium phosphate laden thiolated hyaluronic acid hydrogel based scaffold: physical and in-vitro biocompatibility evaluations5
Macro- and microporous polycaprolactone/duck’s feet collagen scaffold fabricated by combining facile phase separation and particulate leaching techniques to enhance osteogenesis for bone tissue engine5
The anticancer, anti-oxidant, and antibacterial activities of chitosan-lecithin-coated parthenolide/tyrosol hybrid nanoparticles5
Loading of doxorubicin on poly(methyl methacrylate-co-methacrylic acid) nanoparticles and release study5
Effect of surface morphology change of polystyrene microspheres through etching on protein corona and phagocytic uptake5
A dual synergistic effect of titanium and curcumin co-embedded on extracellular matrix hydrogels of decellularized bone: Potential application in osteoblastic differentiation of adipose-derived mesenc4
HEMA and alginate-based chondrogenic semi-interpenetrated hydrogels: synthesis and biological characterization4
Silanized graphene oxide as a reinforcing agent for acrylic bone cements: physicochemical, mechanical and biological characterization4
Synthesis and characterization of L-tyrosine-conjugated quaternary ammonium salt chitosan and their cytocompatibility as a potential tissue engineering scaffold4
Synthesis and evaluation of modified lens using plasma treatment containing timolol-maleate loaded lauric acid-decorated chitosan-alginate nanoparticles for glaucoma4
Noncorrelative relation between in vitro and in vivo for plasmid DNA transfection by succinylated polyethylenimine muscular injection4
0.027735948562622