Journal of Materials in Civil Engineering

Article	Citations
Conversion from Shear Creep Compliance to Relaxation Modulus of Asphalt Binder Using Cauchy Residue Method and Experimental Validation	61
Surface Modification of Multiwalled Carbon Nanotube on the Performance of SBS Asphalt	56
Mechanical Characterization of Gypsum-Based Composites with Single-Use Sling Waste Fibers from Construction and Demolition Waste	56
Investigations on Ni-Ti Shape-Memory Alloy Fiber-Reinforced GGBS Mortar in Aggressive Environment	55
Laboratory Evaluation on Pavement Performance of Polyurethane Mixture for Thin Overlay	51
Mechanistic Analysis and Durability of Thiophene Paving Mixtures	50
Frequency Dependency and Constitutive Model of Dynamical Mechanical Properties of Cement Asphalt Binders	48
Effect of Internal Curing with Superabsorbent Polymers on the Compressive Strength and Shrinkage of Concrete with Natural Volcanic Ash	48
Experimental and Numerical Investigation of Ballistic Impact Response of Polymethylmetacrylate	47
Embracing Sustainability in Rigid Pavement Construction: Unveiling Geopolymer Concrete’s Potential with Incorporated Reclaimed Asphalt Pavement Aggregates	47
Analysis of Segregation Tendency of Aggregates Based on Composite Geometric Characteristics	44
Field Evaluation of Polyester-Polymer Concrete Overlays on Bridge Decks Using Nondestructive Testing	43
Mechanism of the Enhanced C4AF Sintering and Chloride-Binding Capacity Caused by Magnesium Doping	43
Use of Nondestructive Impedance Spectroscopy for the Assessment of Clay–Lime Reaction Kinetics: Influence of Clay Mineralogy, Lime Content, and Curing Conditions	42
Cement-Enhancing Mechanical Behavior of Tailings Behind Upstream Tailings Dam for Safe Decommissioning	41
Corrosion Performance of Various Reinforced Concretes Subjected to a Systematic Wetting–Drying Cycle Regime in Real Marine Environment	40
Effects of Application of Waste Tea on Properties of Asphalt Binder and Mixture	39
Subgrade Strength Performance Behavior of Alkali-Activated Binder and Cement Stabilized Expansive Soil: A Semifield Study	37
Mesoscale Simulation of the Effect of pH on the Hydration Rate, Morphology, and Mechanical Performance of a Calcium-Silicate-Hydrate Gel	37
Systematic Review on Alkali-Activated Binders Blended with Rice Husk Ash	37
Creep and Long-Term Properties of Alkali-Activated Swedish-Slag Concrete	36
Effect of Lithium Silicate–Impregnated Limestone Aggregate on Skid Resistance Properties of Bituminous Mixture	35
Effect of Shape Memory on the Mechanical Properties of Concrete Reinforced with Short Shape Memory Alloy Fibers	34
Experimental Evaluation of the Fatigue Performance and Self-Healing Behavior of Nanomodified Porous Asphalt Mixtures Containing RAP Materials under the Aging Condition and Freeze–Thaw Cycle	33
Material Parameters in the GTN Model for Ductile Fracture Simulation of G20Mn5QT Cast Steels	33

Framework for Mix Design of Pervious Paver Blocks: A Film Thickness Index–Based Approach	32
Investigative Studies on Recycled High-Density Polyethylene and Polypropylene Pellets for Stabilization of Kaolinite Rich Soils	32
Modification and Application of the Arrhenius Equation Based on Activated Energy Methods from Various Asphalt Binders	32
Milled Waste Glass Powder in Magnesium-Silicate-Hydrate Cement: Technical and Environmental Assessment	31
Discussion of “Comprehensive Study on Mechanical and Environmental Characteristics of Cement-Treated Granular Steel Slag as Subballast Layer”	31
Initial Corrosion of Steel in Cement-Based Composites in Saline Soil at 65°C	31
Performance Characteristics of Cold In-Place Recycling Mixtures	31
Macrocell Effect on Chloride Threshold Value and Corrosion Rate of Steel Bar in Simulated Concrete Pore Solution	31
Reactivity Assessment of Supplementary Cementitious Materials and Their Binary Blends Using R3 Test	31
Characterization of (A/F)H3 Phase Microstructure with Different Al/(Fe+Al) Ratios Based on Calcium Sulfoaluminate Cement	30
Characterization of Volumetric Crack Rate and Its Influence on Unconfined Compressive Strength of Red Clay	29
Physicochemical Characterization of the Render Layer of a Rammed Earth Wall in Fuyulou, China	28
One-Part Alkali-Activated Materials Derived from Natural and Designed Blends of Clay and Calcium Carbonate Sources	28
Effect of pH on Desorption of Bound Chlorides in Cement Pastes Containing Granulated Blast-Furnace Slag	27
Steel Fiber-Reinforced Rubberized Concrete for Roadways in Cold Regions: Public Road Test	27
Synthesis of Quaternary Hydrotalcite-Carbon Nanotube Composite and Its Sulfate Adsorption Performance in Cement Paste	27
Assessing Semiflowable Self-Consolidating Concrete with Sugarcane Bagasse Ash for Application in Rigid Pavement	27
Diffusion Phenomenon between Two Different Bitumens from Mechanical Analysis	26
Aging Characteristics of SBS-Modified Asphalt under Thermo-Photo-Oxygen Coupling Conditions	26
Effect of Cement Type and Water-to-Binder Ratio on k-value of Low-Calcium Fly Ash for Concrete Compressive Strength	26
Closure to “Equations Controlling Tensile and Compressive Strength Ratio of Sedimentary Soil–Cement Mixtures under Optimal Compaction Conditions” by Jair de Jesús Arrieta Baldovino, Ronaldo Luis dos S	26
Microstructure Characterization of Cement Pastes with Recycled Aluminum Spent Pot Lining	26
Rationality and Applicability of High-Temperature Performance Indexes for Polymer-Modified Asphalts	26
Analysis of Influencing Factors on Water Stability and Stripping Resistance of Paving Polyurethane Mixture	26
Crack Coalescence Morphology in Asphalt Mixtures under Compressive Loading	26
Experimental Investigation of Various Corroded Metal Materials Used in Building Structures	25
Dynamic Characteristics and Liquefaction Behavior of Sand–Tire Chip Mixes	25
Design and Water Stability Evaluation of Cold Mix Emulsified Asphalt Mixture under Multiple Freeze–Thaw Cycles	25
Carbonation Curing of Concretes in a Flexible Enclosure under Ambient Pressure	25
Recycling Waste Cigarette Butts in Dense Graded Asphalt	25
Influence of CO2 Curing and Autoclaved Aerated Concrete Powder on Sulfate Attack of Cement Paste at Low Temperature	24
Pullout Resistance of Densified Wood Dowel Welded by Rotation Friction	24
Plasma Surface Treatment of Waxes to Enhance the Compatibility and Performances of Wax Warm-Mix Asphalt	24
Sustainable Induction-Heatable Cold Patching Using Microwave and Reclaimed Asphalt Pavement	24
Investigating the Effect of Degree of Blending on Performance of High RAP Content Mixtures	23
Strength and Fracture Properties of Sandy Subgrade Soil Treated with Sodium Polystyrene Sulfonate	23
Dynamic Mechanical Behavior and Constitutive Model of a Newly Designed Reactive Nanoinorganic Cement-Based Composite	23
Creep Behavior of Self-Compacting Rubberized Concrete at Early Age	23
Nanomodified Cement-Based Materials: Review (2015–2020) of Molecular Dynamics Studies	23
A Numerical Model for Electrical Properties of Self-Sensing Concrete with Carbon Fibers	23
Long-Term Corrosion Monitoring of Bacterially Healed Concrete Using Electrochemical and Ultrasonic Techniques	23
Microstructural Analysis of C-(A-M)-S-H Formation in the Portland Cement Paste through the Internal Mg2+ Incorporation	23
Experimental Investigation on the Mix Proportion of Fiber-Reinforced Ultrahigh-Strength Grouting Material	22
Mechanical Properties of Superhigh-Strength Q960 Steel at Elevated Temperatures Considering the Tensile Strain Rate	22
Innovative Gypsum–Particle Composite Used as Building Structural Panels	22
Size Effects on the Mechanical Properties of 3D Printed Plaster and PLA Parts	22
Bond-Slip Performance between High-Strength Steel Wire Rope Meshes and Engineered Cementitious Composites	22
Study on Hot-Mix Epoxy Resin Based on Glass Transition Temperature and Its Application for Steel Bridge Deck Pavement	22
Effect of Acid Rain on Mechanical Properties and Aging Mechanism of Asphalt	22
Long-Term Strength and Durability of Cement-Treated Coal Mine Overburden Materials in Subbase and Base Layers of Low-Volume Roads	22

Evaluation of Semicircular Bend Geometric Properties for Asphalt Concrete Testing	21
Nanoleveled Mechanism of Rejuvenated Aged Asphalt Binders by Different Rejuvenated Agents	21
Influence of Coarse Aggregate Parameters and Mechanical Properties on the Abrasion Resistance of Concrete in Hydraulic Structures	21
Prediction of the Maximum Compressive Strength Geopolymers Using the Method of Weighted Chemical Compositions of Binders	21
High Temperature and Cracking: Equations to Avoid High-Heat Concrete Mixtures in Massive Bridge Footings	21
Study and Application of Compatibility of Waste Polyethylene-Modified Asphalt	21
Calculation of Expansion Stresses and Strains in Concrete under Sulfate Crystallization Attack in Dry–Wet Cycles Environments	21
Improved Mechanical Performance of Gravel Reinforced by Polyurethane Polymer Adhesive	21
Low-Temperature Performance Improvement Measures for Emulsified Asphalt Cold Recycled Mixture: A Comparative Study	21
Early-Stage Hydration Retardation Mechanism in High-Ferrite Cement Clinker Doped with a Massive Amount of CuO	20
Alternative Approach for Predicting the Phase Angle Characteristics of Asphalt Concrete Mixtures Based on Recurrent Neural Networks	20
Evaluation of Moisture Damage in Asphalt Mixtures at Macro- and Nanoscales	20
Flexural Tensile Behavior of Single and Novel Multiple Hooked-End Steel Fiber–Reinforced Notched Concrete Beams	20
Early Hydration Kinetics and Microstructure Development of MgO-Activated Slag at Room Temperature	20
Effect of Sulfate Drying and Wetting Cycles on the Interfacial Bonding Properties between CFRP and Clay Brick	20
Influence of Fiber Content on Acoustic Emission Characteristics Related to Steel Fiber–Reinforced Concrete Subjected to Unconfined Uniaxial Compression	20
Flowability, Strength, and Water Absorption of Mortars Containing Fly Ash and WRA Having Varying Main Chain Lengths	20
Influence of Cyclic Drying–Wetting and Carbonation on Oxygen Diffusivity of Cementitious Materials: Interpretation from the Perspective of Microstructure	19
Physicochemical and Mechanical Behavior of the One-Part Geopolymer Paste Exposed to Hydrochloric and Sulfuric Acids	19
Effects of Immobilized RAP Binder on Asphalt-Aggregate Interaction and Performance of 100% Recycled Asphalt Mixtures	19
Durability Evaluation of MICP-Repaired Concrete Exposed to the Freeze–Thaw Process	19
Rheological, Thermal, and Chemical Evaluation of Asphalt Binders Modified Using Crumb Rubber and Warm-Mix Additive	19
Textile Reinforced Concrete Subjected to Acidic and Alkaline Environment: Experimental Study	19
Study of the Improved Behavior of Portland Cement Mortar Based on Adsorption and Deposition of Microbial Cement	19
Properties of Engineered Cementitious Composites with Raw Sugarcane Bagasse Ash Used as Sand Replacement	19
Development of the Asphalt Foaming Performance Evaluation System Based on Binocular Ranging Technology	19
Evaluation of Performance Deterioration Characteristics of Asphalt Mixture in Corrosion Environment Formed by Snow-Melting Agents	19
Corrosion Characteristics of Cement-Stabilized Crushed Stone under Vibrational Effects	18
High-Cycle Fatigue Performance of the Heat-Affected Zone of Q370qENH Weathering Bridge Steel	18
Influence of Organic Emulsion on the Structure and Properties of Geopolymer	18
Optimization of SFCC as Mineral Filler in Asphalt–Concrete Mixture Using Combined Methods of Taguchi and PCA	18
Simulation of the Localized Modulus of Elasticity of Hardwood Boards by Means of an Autoregressive Model	18
Preliminary Study of the Mechanical Behavior of Gypsum Plastering Mortars with Ceramic Waste Additions	18
Reviewers	18
Utilization of Superhydrophobic Phosphogypsum in Mortar to Ameliorate Water Repellency and Mechanical Strength	18
Corrosion of Strained Plain Rebar in Chloride-Contaminated Mortar and Novel Approach to Estimate the Corrosion Amount from Rust Characterization	18
Impact of Cation Type of Chloride Salts on Diffusion Behavior and Binding Capacity of Chloride Ions in Concrete Containing Sodium Nitrite and Disodium Hydrogen Phosphate	18
Comprehensive Evaluation of Properties and Performance of Asphalt Mixtures with Reactive Isocyanate and Styrene-Butadiene-Styrene-Modified Binders	18
Investigation of the Adhesion and Debonding Behaviors between Warm-Mix Recycled Asphalt and Aggregates Based on Molecular Dynamics Simulation	18
Numerical Scheme for Predicting Chloride Diffusivity of Concrete	18
Mechanism of Chemical Environment on Compression and Shear Strength of Compacted Loess: A Case Study from Chinese Loess Plateau	18
Fabrication and Performance of Microencapsulated Phase-Change Material/Gypsum Plaster Tile for Thermal Energy–Storage Building Material	18
Design and Calibration of a Large-Scale 155-mm Split-Hopkinson Pressure Bar	18
Discussion of “EPS Geofoam Pavement Foundations Overlaid by Geocell-Reinforced Soil under Static Loading: Large-Scale Tests and Numerical Modeling’’ S. N. Moghaddas Tafreshi, S. M. A. Ghotbi Siabil, a	17
Enhancing Burnability Characteristics of Low-Temperature Burnt-Cement Clinker by Recycling Phosphogypsum Wastes	17
Mechanical Properties of Cement Mortars Incorporating Zero-Valent Iron Nanoparticles	17
A Study on Macro and Micro Characteristics and Correlation of Soil under Cyclic Freeze–Thaws	17
Rheological and Flexural Properties of High Strength Cementitious Composite Reinforced with L-Shaped End Superelastic Short Fibers	17
Foam Glass Dust as a Supplementary Material in Lime Mortars	17
Discussion of “Analyzing Moisture Susceptibility of Hot-Mix Asphalt Based on Tensile Strength Ratio, Coating Ratio, and Thermodynamic Parameters”	17
Discussion of “Characterizing Permanent Deformation of Alaskan Granular Base–Course Materials” by Lin Li, Jenny Liu, Xiong Zhang, Peng Li, and Steve Saboundjian	17
Status Report: Section A	17
Investigation on the Limitations of Accelerated Migration Test Applied to UHPFRC with Steel Fibers	17
Development of High-Performance Sticky Rice–Lime Composite with Metakaolin and Hemp Fibers	17
A Binary Microorganism Self-Healing Agent for Concrete Cracks Comprising Bacillus pasteurii and Saccharomyces cerevisiae	17
A Comparative Study of Properties of Ambient-Cured Recycled GGBFS Geopolymer Concrete and Recycled Portland Cement Concrete	17
Ballistic Resistance of UHPFRC Panels Subjected to Armor-Piercing Projectiles	17
Analytical Equations and Numerical Simulation Describing the Pore and Solid Phase Distributions of Interfacial Transition Zones in Cement-Based Materials	17
Acid-Resistance Behaviors of Natural Aggregates	17
Factors Affecting the Properties of PCB-Modified Asphalt	17
Closure to “Cement, Lime, and Fly Ashes in Stabilizing Expansive Soils: Performance Evaluation and Comparison” by Masrur Mahedi, Bora Cetin, and David J. White	17
Cohesion Performance of Tack Coat Materials between Polyurethane Mixture and Asphalt Mixture	17
Role of Impact and Compression-Based Crushing on the Physical, Chemical, and Morphological Characteristics of Recycled Concrete Aggregates	17
Simulation of Microstructure and Ionic Diffusivity for Leached Cement Pastes	16
Effects of Epoxy Resin System and Ingredient Content on the Properties of Asphalt and Its Mixtures	16
Evaluation of High-Temperature and Antireflection Cracking Performance of Warm Mixed Recycled Asphalt Mixture	16
Effect of MIST Conditioning on Moisture-Induced Damage of RAP Mixes Using Elastic Moduli and Stress–Strain Behavior	16
Performance of Rammed Earth Exposed to High Temperature and Direct Fire Using Destructive and Nondestructive Analysis	16
Laboratory Assessment of the Mechanical Properties of an Unsaturated Mid-Atlantic Silty Sand	16
Comparison of Rutting Resistance of Plant Produced Asphalt Mixes Using Hamburg Wheel Tracker and Surrogate Simple Performance Tests: IDEAL-RT and HT-IDT	16
Evaluation of the Factors Affecting the Performance of Fiber-Reinforced Asphalt Mixtures	16
Characteristics of Red Mud–Blast Furnace Slag Composite Low-pH Cementitious Material Reinforced Using Urease-Producing Microorganisms	16
Compression Properties of Basalt Fiber–Reinforced Polymer Confined Coconut Shell Concrete	16
Evaluation of Moisture Sensitivity of Asphalt Mixtures Based on Surface Energy of Asphalt Mastic	16
Upscaling Bacterial Inoculation for Field-Scale Applications of Microbially Induced Carbonate Precipitation	16
Mechanical Properties of Shear Key in Composite Segment for Shield Tunnel under High Temperature Welding	16
Interfacial Bonding between Basalt Fiber/Polymer Pellets and Various Nano-Modified Cementitious Matrices	16
Ground Granulated Blast Furnace Slag as a Partial Replacement of Cement in Open-Graded Cement-Stabilized Macadam	16
Repurposing Waste Polyurethane into Cleaner Asphalt Pavement Materials: Laboratory Investigation	16
Bond Behaviors between UHPC and Normal-Strength Concrete: Experimental Investigation and Database Construction	15

Early-Age Bond Behavior of Deformed Bars in Concrete Subjected to Bilateral Pressures	15
Study on the Performance of Epoxy Asphalt with Different Matrix Asphalt Contents	15
Performance of Self-Healed Alkali-Activated Slag Mortar at Elevated Temperature	15
Study of the Damage Evolution Process and Micromechanics Constitutive Model of Microcrystalline Limestone under Periodic Blasting Load	15
Rheological, Mechanical, and Chemical Characterization of Asphalt Binders and Mixtures with Waste Tire and Plastic Pyrolytic Chars	15
Analyzing the Damage–Healing Performance of Asphalt Mixture from Macroscopic and Mesoscopic Scales	15
Protection and Time-Varying Characteristic of Rebar Corrosion in Magnesium Oxychloride Cement Recycled Concrete under the Simulated Salt Lake Environment	15
Influence of Molybdenum Tailings Powder on the Hydration Characteristics of Cement Paste	15
Microstructural, Surface Energy, and Thermal Behavior Changes of Virgin and Aged Bitumen after Fusion	15
Microwave-Mediated Polymer Bonding of Sands: Experimental Study	15
Application of Design-Expert Response Surface Methodology for the Optimization of Recycled Asphalt Mixture with Waste Engine Oil	15
Study of Mechanical Properties of Galfan Cables under Cyclic Tension	15
Polymer Enhancement Mechanisms in Cementitious Materials: Insights from Atomistic Simulation	15
Effect of Alkali Content on the High-Temperature Behavior of Alkali-Activated Slag Paste Containing MSWI Bottom Ash	15
Upcycling Spent Waterglass Foundry Sand into Reactive Fine Aggregates for Alkali-Activated Slag to Achieve Enhanced Compressive Strength	15
Experimental Evaluation of Microvoid Characteristics and Relationship with Stress and Strain for Ductile Fracture	15
Effects of Temperature Drop on Ultralow Cycle Fatigue of G20Mn5QT Cast Steel	15
Stress-Based Fatigue Performance and Fatigue Life Prediction of Engineered Cementitious Composites	14
Hydration Mechanism of Cement Pastes with the Addition of Dry Ice through Electrochemical Impedance Spectroscopy	14
Residual Mechanical Properties of BPRCC under Cyclic Environmental Conditions	14
Estimation and Evaluation of Water Damage Resistance of Warm-Stone Matrix Asphalt Mixture with Compound Polymer Modifiers Using Regression Tree Ensemble Method	14
Bond-Slip Behavior between Deformed Rebar and Concrete at Cryogenic Temperatures	14
Modeling Nonlinear Stress–Strain Behavior of 6000 Series Aluminum Alloys under Cyclic Loading	14
Application of Foamed Concrete Backfill in Improving Antiexplosion Performance of Buried Pipelines	14
Effect of Nitrogen-Doped Graphene on the Hydration, Mechanical, and Microstructural Properties of Cement Pastes	14
Early Corrosion Behavior of Cr10Mo1 Alloy Corrosion-Resistant Steel Bars in Seawater–Sea-Sand Concrete	14
Novel Porosity-Water/Binder Index for Strength Prediction of Artificially Cemented Soils	14
Structural Integrity Assessment of the Welded SAE/AISI 1045 Steel for Structural Use	14
Using Waste Cigarette Butt Fibers as Asphalt Binder Stabilizer in Stone Matrix Asphalt: Mechanical and Environmental Characterization	14
Properties and Microstructure of Alkali-Activated Slag Paste Modified by Superabsorbent Polymers	14
The Spatial Distribution of Microbially Induced Carbonate Precipitation in Sand Column with Different Grouting Strategies	14
Research on Creep Constitutive Model and Creep-Life Calculation Method for Steels	14
Low-Temperature Mechanical Properties of AA 6063-T6 and 7075-T6: Tests and Full-Range Constitutive Models	14
Evaluation of Mechanical Performance of Compacted Magnesium Hydroxide after Carbonation Curing	14
Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar	14
Fiber-Reinforced Cement Pipes as Simulants for Deteriorated Asbestos Cement Pipes in Rehabilitation Studies	14
Beetroot Juice Additive in Chloride Brines Reduces Damage of Concrete Exposed to Freeze–Thaw Cycles	14
Influence of Same-Grade Asphalt Binder from Different Sources and Aging on Moisture Damage Characteristics of Asphalt–Aggregate System	14
Evaluating Subgrade Compaction for Different Soils Using Nondestructive Lightweight Deflectometer	14
Research on Mechanical Properties and Design Methods of Graded Gravel in Intercity Railways	14
Influence of Calcium Leaching on Mechanical and Physical Properties of Limestone Powder–Cement Pastes Cured under Different Temperatures	14
Application of Superabsorbent Polymer as Self-Healing Agent in Self-Consolidating Concrete for Mitigating Precracking Phenomenon at the Rebar–Concrete Interface	13
Mechanistic Analysis of the Stress and Displacement Evolutions of Asphalt Mixtures Based on Finite Element Simulation	13
Experimental Investigation of the Static and Dynamic Behavior of Sand-Tire Crumb Mixes	13
Study of the Aging Behavior of Asphalt Mastic: Impact of the Powder-to-Binder Ratio and the Aging Method	13
Optimization of Slurry Impregnation Technique for Upcycling Carbonated Recycled Concrete Aggregates for Paving Concrete Applications	13
Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon Fiber	13
Sulfate Resistance of Novel Alkali-Activated Filling Grout for Shield Tunnels: Comparison with Typical OPC-Based Filling Grout	13
Adhesion Characteristics of Warm-Mix Crumb Rubber-Modified Asphalt-Steel Slag Interface under Water Erosion	13
Effect of High-Density Polyethylene Pyro-Oil Modification on Chemical, Rheological, and Damping Properties of Binders	13
Construction of Water Pond Using Bioslurry-Induced Biocementation	13
Experimental Investigation of the Effect of Types of Fillers on the Performance of Microsurfacing Asphalt Mixture	13
Testing the Strengths of Sandstone Aggregates Stabilized with Cement and Styrene–Butadiene Latex Copolymer for Road Subbase Applications	13
Effect of Sodium Nitrite as Corrosion Inhibitor against Chloride-Induced Corrosion of Steel Rebar in Geopolymer Concrete Containing Fly Ash and GGBS	13
Crack Evolution and Strength Attenuation of Red Clay under Dry–Wet Cycles	13
Effect of Concrete Mix Design Factors on Static Yield Stress Changes due to Vibration	13
Influence of Infiltration Velocity on the Measurement of the Surface Energy Components of Asphalt Binders Using the Wilhelmy Plate Method	13
Influence of Process Variables on Shrinkage in Low-Calcium Fly-Ash Geopolymers	13
Investigating Aging and Rejuvenation Mechanism of Biomodified Rubberized Bitumen	13
Effect of Crumb Rubber Particles on Antisliding and Noise-Reduction Performance of Asphalt Pavement	13
Utilization of Glass Powder and Silica Fume in Sugarcane Bagasse Ash-Based Geopolymer for Soil Stabilization	13
Effect of Cement and Fly Ash Dosages on the Characteristics and Performance of Microsurfacing Mix	13
Mechanical Properties of Self-Compacting Mortars Containing Rubber Waste Particles as Fine Aggregate in Freeze–Thaw Cycles	12
Application and Vibration Reduction Properties of Prefabricated and Cast-in-Place Phononic-Like Crystal Polymer Concrete Track Bed in Subway Engineering	12
Effect of Polymer Amendment on Hydraulic Conductivity of Bentonite in Calcium Chloride Solutions	12
Evaluating the Performance of Early-Age Fly Ash Concrete Subjected to Steam and Autoclave Heat Treatments	12
Influence of Geogrid Properties on Rutting and Stress Distribution in Reinforced Flexible Pavements under Repetitive Wheel Loading	12
Evaluation of the Effect of UHMWPE on the Low-Temperature Cracking of Hot-Mix Asphalt	12
Effect of Moisture on Electrical Resistivity and Self-Sensing Behavior of a Cement Paste	12
Component Changes and Mechanism of Cold Regeneration of Aged Asphalt Using Waste Vegetable Oils	12
The Physicomechanical Behavior and Microstructure of Air-Entrained 3D Printable Concrete	12
Physicochemical and Microstructural Evaluation in Lime-Treated Silty Soil Exposed to Successive Wetting-Drying Cycles Submitted to Different Testing Conditions	12
Impact of Shield Tunneling Residues on Concrete Compressive Strength: Influencing Laws and Prediction Models	12
Synthesis and Performance of Anticlay Polycarboxylate Superplasticizers	12
Representation of Flow Number Results of Hot-Mix Asphalt Using Genetic-Based Model	12
Effect of Packing Density According to CPM on the Rheology of Cement–Fly Ash–Slag Paste	12
Improvement of the Pozzolanic Properties of Calcined Mica Clay	12
Laboratory Study to Evaluate the In-Situ Use of Rejuvenator Seal Material to Restore In-Service Asphalt Pavement	12
Characterization of Storage Stability of EPDM Rubberized Asphalt with Tire Pyrolytic Oil and Sulfur	12
Microscopic Analysis of Aging Characteristics of SBS-Modified Asphalt Based on FTIR Technology	12
Effect of Protein Containing Hydrogels on the Self-Healing of Cementitious Materials	12
Service Life Prediction of Concrete with Combined Air-Entraining Admixture and Fibers under Freeze–Thaw Cycles Based on Critical Water Saturation Theory	12
Reclaimed Asphalt Pavement as a Substitution to Natural Coarse Aggregate for the Production of Sustainable Pervious Concrete Pavement Mixes	12
Research on the Performance of Emulsified-Asphalt Recycled Mixture–Based Cement Dosing	12
Bonding Evaluation of Nanosilica-Modified Slag-Based Composites Comprising of Basalt Pellets and Polyvinyl Alcohol Fibers for Shear Joints	11
Potential Alternative to Styrene–Butadiene–Styrene for Asphalt Modification Using Recycled Rubber–Plastic Blends	11
Strength and Ductility of Concrete Confined by Fiber Metal Laminate Composites	11
Mechanism and Strength Characteristics of Microbially Induced Carbonate Precipitation and Lime Composite Cured Soft Clay	11
Behavior of Sand–Tire Chip Mixtures in Constant Shear Drained Stress Path	11
Behavior of a Mixture of Coal Wash and Rubber Crumbs under Cyclic Loading	11
Closure to “Experimental Investigation of the Functional Performance of Pouring Semiflexible Pavement: Healing Capacity, Noise Reduction, and Electrical Conductivity”	11
Mechanistic Performance of Hybrid Asphalt Concretes with Recycled Aggregates and Hemp Fiber for Low Traffic Roads	11
Engineering and Leaching Behavior of Lime-Treated Fly Ash Amended with Montmorillonite Nanoclay	11
Laboratory Evaluation of Emulsion-Treated Base Layer Mixes Incorporating Reclaimed Asphalt Pavement Materials	11
Investigation of Hybrid Intelligence Models to Optimize Cement Kiln Content Based on the Failure Stress, Chemical Composition, and Loss on Ignition of Mortar	11