OOIR: Observatory of International Research

Papers

(The TQCC of Acta Mechanica Solida Sinica is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)

Article	Citations
A Novel Design of a Pre-separation Panel Structure to Protect Against the Impact of an Explosion in an Aircraft Plenum Chamber	45
Mechanistic Data-Driven Modeling on the Damage of Hyperelastic Materials Under Cyclic Loading	37
ESL-Based MMC Topology Optimization of Thin-Walled Stiffened Structures Under Transient Impact Loading	35
Adhesive Contact of a One-Dimensional Hexagonal Quasicrystal Half-Space Punched by a Spherical Indenter	35
Quasi-Static Penetration Behavior of Unidirectional-Basalt/Weave-Carbon Fiber Hybrid Composites	34
Fracture Mechanics Analysis of Piezoelectric Materials Using an Efficient Collocation Element Differential Method	30
Deep-Learning-Coupled Numerical Optimization Method for Designing Geometric Structure and Insertion-Withdrawal Force of Press-Fit Connector	28
Impact of Surface Microstructures on Diffusion-Induced Stress in Lithium-Ion Battery Electrodes: A Mechanical-Chemical Coupling Study	24
Programmable Mechanical Metastructure with Symmetrically Tunable Linear and Nonlinear Properties	23
Gradient Optimization Assisted Bubble Sampling Method for Structural Reliability Analysis	23
Geometrically Nonlinear Deformation Reconstruction Based on iQS4 Elements Using a Linearized Iterative iFEM Algorithm	22
Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces	21
Size and Interface Effects on Tensile Strength of Polymers with Nano/Micro Particle Inclusions	20
Data-Enhanced Low-Cycle Fatigue Life Prediction Model Based on Nickel-Based Superalloys	19
Physics-Data Co-driven Uncertainty Quantification Method for Fatigue Life of Metallic Materials with Multiple Pore Defects	17
An Inertia-Amplified Nonlinear Absorber for Robust Pulse Mitigation in Lightweight Structures	17
Dynamic Biaxial Tensile Experiment of Cruciform Specimen with Electromagnetically Actuated Punch	17
Dynamic Loading for Fiber Pullout Interface Strength of 3D-Printed Continuous Carbon Fiber Composites	16
Bandgap Analysis of Periodic Composite Microplates with Curvature-Based Flexoelectricity: A Finite Element Approach	15
Generalized Thermoelastic Lamb Waves in One-Dimensional Hexagonal Quasicrystal Nanoplates	15
Experimental Study on Strain Transfer Behavior of Graphene and Black Phosphorus Heterostructure on Flexible Substrate	15
Stress-Based Topology Optimization of Geometrically Nonlinear Structures	14
A New and Efficient Approach to Determining the Rate of the Second-Order Symmetric Tensor and Its Isotropic Function	14
Enhanced Flexoelectricity in Barium Titanate-Cellulose Composite Thin Films	14
Theoretical Modeling and Analysis of Vibroacoustic Characteristics of an Acoustic Metamaterial Plate	13

Topology Optimization of Geometrically Nonlinear Structures Under Thermal–Mechanical Coupling	12
Mechano-electrochemical Coupling Deformation in Layered Electrode Materials: A Review of Current Research and Future Directions	12
Converse Flexoelectric Actuation of Dielectric Elastomeric Structures	12
Mechanics of Flexible Lithium-Ion Batteries: Structural Design and Characterization	12
Investigating the Small-Scale Deformation Characteristics of NiTi Shape Memory Alloy Under Cyclic Loadings Using Nanoindentation	12
On Mechanics of a Visco-Hyperelastic Damage Model for Bilayer Hard-Magnetic Elastomer Membranes Under Magneto-Pneumatic Coupling	12
A Crystal Plasticity Cyclic Constitutive Model Based on Dislocation Mechanism for Body-Centered Cubic Axle Steel EA4T	12
A Survey of Empirical Atomic Potentials for Inorganic Perovskites	12
Optimization of Band Gap of 1D Elastic Metamaterial Under Impact Load by Regulating Stiffness	11
Diamond-Shaped Shrinking Device by Elastic Wave Metamaterial Plate and Active Control	10
Thermal Torsion Effect of Twisted Polymer Actuators	10
Molecular Dynamics Simulation on Compatibility and Microstructure Evolution During Stress-Induced Phase Transformation in NiTi Single Crystal	10
A Cyclic Constitutive Model Based on Crystal Plasticity for Body-Centered Cubic Cyclic Softening Metals	10
Bending Characteristics of Folded Multi-celled Tubes with Square and Circular Section Geometries	9
Adhesion Performances Between Two Orthotropic Solids Influenced by Temperature Increment	9
Inverse Design of Nonlocal Coiling-Up Space Acoustic Metasurfaces Based on Surface Coupling Approach	9
Surface Elasticity Effects on Rigid Indenter: Thin Elastic Beam Contact Mechanics	9
An Asynchronous Variational Integrator for Contact Problems Involving Elastoplastic Solids	9
Correction to: Structural Optimization of Fiber-Reinforced Material Based on Moving Morphable Components (MMCs)	9
Semi-analytical Modeling of the Influence of Macro Bending Effects on Micro Contact-Inhomogeneity Problems	8
Tunability of Band Gaps of Programmable Hard-Magnetic Soft Material Phononic Crystals	8
Novel Functionally Graded Warp-and-Woof Auxetic Lattices with Enhanced Negative Poisson’s Ratio and Superior Energy Absorption	8
Research on Nonlinear Problems of Thermoelastic Contact Based on the Cell Vertex Finite Volume Method	8
Giant Flexoelectric Effect in Snapping Surfaces Enhanced by Graded Stiffness	8
Micromechanics of Thermal Conductive Composites: Review, Developments and Applications	8
Unidirectional Energy Transfer in Modulated Systems Via Adiabatic Passage	8
A Meshfree Approach for Dynamic Analysis of Sandwich Conical and Cylindrical Shells with Varying Thicknesses	7
A New Formulation of the Scaled Boundary Finite Element Method for Heterogeneous Media: Application to Heat Transfer Problems	7
Design and Performance Evaluation for a Lightweight Wearable Whole-Body Exoskeleton for Load Carrying	7
A Cell-Based Smoothed Interpolating Element-Free Galerkin Method for Dynamic Elastoplastic Analysis	7
Analysis of Mode-Coupling Vibrations in Thickness-Shear and c-Axis-Tilted FBAR Sensors	7
An Inverse Finite Element Method for Large Deformation Reconstruction of Plate and Shell Structures	7
Dynamic Response of Tunnel Structures in Inhomogeneous Medium Under SH Wave: Shear Modulus in Quadratic Functional Form	7
Underwater Directional Acoustic Source Based on Pentamode Material	7
Multi-Polarization Vibration Modes and Bandgap Regulation Mechanism of the Multi-Bandgap Lightweight Plate-Truss Hybrid Structures	7
Friction Behaviors of Rough Line Contact Using Machine Learning-Assisted Finite Element Analysis	7
Nonlinear Bifurcation and Post-buckling Analysis of Cylindrical Composite Stiffened Laminates Based on Weak Form Quadrature Element Method	7
Modeling and Characterization of Residual Stress Distribution of Thin Film/Substrate Structure with Non-negligible Film Thickness from Morphology	7
Post-Buckling Behavior of Graphene Origami Metamaterial-Reinforced Laminated Cylindrical Shells Under Hydrostatic Pressure	7
One-DOF Rigid and Flat-Foldable Origami Polyhedrons with Slits	7
Nonlinear Vibration of FGM Sandwich Nanoplates with Surface Effects	7
Crack Propagation and Debonding Study of Thin Films on Compliant Substrates Based on a Novel Nonlocal Damage and Cohesive Zone Model	7
Crystal Plasticity-Based Spalling Damage Model for Ductile Metals	7
Peridynamic Meso-scale Modeling for Degradation in Transverse Mechanical Properties of Composites with Micro-void Defects	6
Green’s Function for Two-Dimensional Piezoelectric Quasicrystals Containing Elliptical Defects	6
Chemomechanical Properties of Electrospun Polyvinyl Acetate (PVAc) Fiber Mat and its Application in Water-Triggered Self-folding	6
Formation of One-Dimensional van der Waals Heterostructures via Self-Assembly of Blue Phosphorene Nanoribbons to Carbon Nanotubes	6
Prediction of Postbuckling Characteristics of Perforated Metamaterial Cylindrical Shells Under Axial Compression	6
Level-Set-Based Topology Optimization of a Geometrically Nonlinear Structure Considering Thermo-mechanical Coupling Effect	6
Tuning of Multi-stability Profile and Transition Sequence of Stacked Miura-Origami Metamaterials	6

Molecular Dynamics Study on the Wetting Behavior of Kaolinite Surfaces	6
Analytical and Numerical Investigation on the Penetration Resistance of PUE/Honeycomb Aluminum Composite Structures	6
Phase-Field Modeling of Thermal Fracture and Shear Heating in Rocks with Degraded Thermal Conductivity Across Crack	6
Progress in the Effect of Mass Transfer in the Lacunar-Canalicular System on Aging Osteoporosis	6
A General Simulation Method for Complex Deformation of Irregular-Shaped Origami Configurations	6
Mechanical Response of Conductor on Round Core (CORC) Cables Under Electromagnetic Force	6
Hysteresis Analysis on Origami Energy Dissipation Braces with Local Miura Units	6
Dynamic Behavior and Vibration Suppression of a Generally Restrained Pre-pressure Beam Structure Attached with Multiple Nonlinear Energy Sinks	6
Nonlinear Creep Constitutive Model and Its Finite Element Implementation for Composite Solid Propellant with Aging and Damage	6
Influence of Fatigue Damage on Mechanical Behavior of Laminated Composite Under ± 45° Tension	6
Loading Rate Effects on Stick–Slip in PMMA: Insights into Fracture Energy and Contact Area Evolution	6
Derivation of the Orthotropic Nonlinear Elastic Material Law Driven by Low-Cost Data (DDONE)	6
Scattering of Shear Horizontal (SH) Waves by a Circular Hole in an Infinite Piezomagnetic Material	6
The Dislocation Dynamics Study and Machine Learning Approach of the Critical Stress for Dislocation Shearing and Bypassing Precipitates	5
Accelerating Optimization Design of Bio-inspired Interlocking Structures with Machine Learning	5
Analysis of Vibrational Properties of Horn-Shaped Magneto-Elastic Single-Walled Carbon Nanotube Mass Sensor Conveying Pulsating Viscous Fluid Using Haar Wavelet Technique	5
A Thermo-mechanical-oxidation-diffusion Coupled Peridynamic Model for Ablative Behavior of ZrC-Coated C/C Composites	5
Microstructure Dynamic Evolution and Coupling Analysis of Graphite Electrode during the Lithiation Process	5
Partial Slip Contact Behavior of Finite-Thickness Graded Media Under Both Normal and Tangential Loads	5
Design of Low-Resistance Composite Electrolytes for Solid-State Batteries Based on Machine Learning	5
Fretting Fatigue Behavior of Ti-6Al-4V Alloy Bolted Joints with Bolted Connection Features in Aero-engines	5
A Stiffness Inversion and Correction Method for Aircraft Landing Gear Beam Element Model Based on Deep Learning	5
Controllable Delamination of CNT-Reinforced Carbon Fiber Films by Harnessing Mechanical and Topological Characteristics of the Composites	5
Impact Damage Detection in CFRP Plates Using Non-specular Reflection of Bounded Ultrasonic Beams	5
Stiffness-Tunable Origami Structures via Multimaterial Three-Dimensional Printing	5
The Method of Polynomial Particular Solutions for Solving Nonlinear Poisson-Type Equations	5
Nonreciprocal Rotating Waves of Odd Elastic Circular Plates	5
An Uncertainty Evaluation on the ΔKth and ΔKIC of Fine-grained Isotropic Graphite	5
Surface Elastic Effects on Electromechanical Responses of a Piezoelectric Semiconducting Nanobeam	5
Preface to the Special Issue on “Experimental Mechanics at the Micro/Nanoscale”	5
Numerical Simulation of Particle-Reinforced Composites Based on Viscoelastic VCFEM	5
Topology Optimization of Transient Thermo-elastic Structure Considering Regional Temperature Control	5
Resonance System Reliability and Sensitivity Analysis Method for Axially FGM Pipes Conveying Fluid with Adaptive Kriging Model	5
Isogeometric Analysis (IGA)-Based Topology Optimization for 3D Flexoelectric Structures	5
Enhanced Near-Field Shock Wave Propagation in Underwater Explosion with Air-Tube	5
Analysis of Piezoelectric Semiconductor Structures Considering Both Physical and Geometric Nonlinearities	5