International Journal of Prosthodontics

Papers
(The TQCC of International Journal of Prosthodontics is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-09-01 to 2025-09-01.)
ArticleCitations
Effect of Aging on the Load to Failure of Molar Implant-Supported Monolithic Zirconia Crowns: A Laboratory Study42
Influences of Different Torques on the Size of the Microgap and Bacterial Leakage in Different Implant Systems: An In-vitro Study35
Effects of Overnight Denture Cleaners on Surface and Optical Properties of Conventional, CAD/CAM Milled, and 3D Printed Dentures27
Effect of Aging on Fracture Load and Reliability of Cemented Glass-Ceramics24
Human Gingival Fibroblast Proliferation on Materials Used for Dental Implant Abutments: A Systematic Review20
Binary Logistic Regression Analysis on the Association of Occlusion with the Temporomandibular Joint Arthralgia in the Partial Denture Wearers—A Retrospective Study19
Impact of CAD/CAM Material and Bonding Protocol on the Bond Strength Between Denture Bases and Artificial Teeth: A Systematic Review and Meta-analysis19
Trueness of One Stationary and Two Mobile Systems for Three-Dimensional Facial Scanning18
Editorial: Press Release from Paris, October 16, 2023: The EAO and the AO Launch the Osseo Alliance18
Monolithic- and Partially Veneered High-Translucent Zirconium Dioxide (Ysz), A 4-Year Follow-Up of a Multicenter Prospective, Randomized Controlled Trial on Posterior Fdps18
Influence of Viewing Distance on Visual Color Differentiation In Vitro18
Primary Exploration of the Clinical Application of 3D-Printed Complete Dentures17
Does Clinical Experience Affect Chairside Digital Waxing of Single Crowns More Than Software Training?17
A Technique for Denture Fabrication Using 3D-Printed Duplicated Removable Partial Dentures16
Update on the Accuracy of Digital Implant Impressions in 2023: A Coordinate-Based Analysis15
Mechanical Properties of Zirconia Materials with Different Translucency: An In Vitro Study15
Rehabilitation of Ectodermal Dysplasia Patients Presenting with Hypodontia: Outcomes of Implant Rehabilitation: Part 2: Two Cases15
Correlation Between the Tragus-Incisal Distance and Interocclusal Rest Distance15
Nonthermal Plasma Treatment Can Eliminate Sandblasting Procedure For Zirconia–Resin Cement Bonding15
Examining Circumferential Bone Stability around Narrow-Diameter Implants Retaining Mandibular Overdentures: A Three-Year Longitudinal Analysis15
Immediate Loading of 3-Unit Posterior Fixed Dental Prostheses on 3 Vs 2 Implants, Comparison and Evaluation with up to 10-Year Follow-up14
Editorial: New Section—EAO Position Papers14
Esthetic Printed Rim with Anterior Deprogrammer for Implant-Supported Full-Arch Rehabilitations: A Case Report14
Comparative Evaluation of Load-Bearing Capacity and Fracture Analysis of PEEK and Zirconia Three-Unit Fixed Dental Prostheses: An In Vitro Study13
Zirconia Restorations Cemented onto Nonoriginal Titanium Bases May Result in Increased Bleeding on Probing, Probing Depth Values, and Varying Mean Marginal Bone Levels13
Laboratory Evaluation of Production Efficiency for Removable Partial Denture Frameworks Using In-House Casting vs Outsourced Additive Manufacturing Techniques12
In-Vitro Accuracy of Digital Versus Conventional Workflows for Complete Arch Implant Supported Frameworks – A Scoping Review12
Effect of Different Milling Devices on Marginal Fit of CAD/CAM Zirconia Copings on Implant Stock Abutments12
Retention Strength of Zirconia Crowns Cemented onto PEEK Abutments Using Two Different Types of Resin Cement With or Without Primer Application–An In Vitro Study12
A Pilot Study to Predict Lifetime of Resin-Based Materials for Denture: Presentation of an In Vitro Thermally-Accelerated Ageing Method12
IN VITRO SURVIVAL AND FRACTURE FORCE OF LITHIUM DISILICATE HYBRID ABUTMENT CROWNS11
The Influence of Ferrule on the Marginal Gap and Fracture Resistance of Zirconia Endocrowns11
Digitally Fabricated Provisional Implant Restorations Prior to Implant Placement: A Clinical Case Series10
Effect of Cantilever Extension on Bone Loss in Mandibular Complete-Arch Implant-Supported Fixed Prostheses with Three and Four Implants10
Effect of Food-Simulating Liquids on Hydrolytic Behavior of Resin Matrix Ceramics10
Influence of a Novel Lithium Disilicate Coating on Composite-Zirconia Bonding and Bond Characterization10
Rationale for a Novel Attachment System for Implant-Supported Overdentures10
Clinical and Microbiologic Outcomes of Ceramic Laminate Veneers Bonded to Teeth Without a Finish Line: 1-year Results of a Prospective Study10
Accuracy of Virtual Static Articulation: A Systematic Review10
Which Patient-Related Factors Influence the Outcome of Telescopic-Retained Removable Implant-Supported Dental Prostheses in Edentulous Patients?10
Evaluation of Prosthetic Complications with Metal-Acrylic Resin Implant-Fixed Complete Dentures: A Medium- and Long-Term Retrospective Analysis with Up to 13 Years of Follow-up10
In Vitro Comparison Between Complete-Arch Implant Supported Frameworks Using Intraoral Scanning and Photogrammetry9
Influence of Blowing Musical Instruments on Geometrical Face Changes: 3D Evaluation Study9
Retrospective Evaluation of Factors Affecting Long-Term Clinical Performance of CAD/CAM Laminate Veneers9
Benefits of Contemporary Rehabilitation of Edentulism: A Statement9
Comparison of Accuracy of Fit of Three-Unit Fixed Ceramic Cobalt-Chromium Dental Prostheses Fabricated by Three Different Techniques9
Vertical Deviation Caused by Tightening Torque on Implant Scan Body: An In Vitro Study9
A Randomized Clinical Trial of Monolithic Single-Tooth Crowns: 1-Year Preliminary Results9
Effect of Sintering Speed and Polishing or Glazing on the Failure Load of Monolithic Zirconia Fixed Partial Dentures8
Comparison of the Retention of Conventional and Polyvinyl Siloxane Matrix Materials with Different Patrices for Implant-Retained Overdentures: An In Vitro Study8
Effect of Utilizing Cheek Retractors on Patient Satisfaction and Trueness of Peripheral Borders in Maxillary Digital Scans for Totally Edentulous Patients: An In Vivo Study8
Effects of Various Laser Treatments on Surface Characterization and Repair Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramics8
Fracture Load of Veneered and Monolithic Single-Unit Fixed Dental Prostheses Made from the High-Performance Thermoplastic Polyphenylene Sulfone8
Evaluation of Surface Roughness and Wear Resistance of Additively and Subtractively Manufactured CAD-CAM Dental Materials: An In Vitro Study8
Self-Assessment of Hungarian Dentists Regarding Removable Partial Denture Design and Communication with the Dental Technician8
Lemongrass-Incorporated Tissue Conditioner with Adjustable Inhibitory Effect Against Candida albicans: An In Vitro Study8
The International Journal of Prosthodontics8
Effect of Food-Simulating Liquids on the Mechanical Properties of 3D-Printed Provisional Restoration Materials8
Factors Affecting Clinical Decision-Making Among Dentists and Dental Students: A Crosssectional Study7
Impact of High-Speed Sintering on Accuracy and Fit of 4 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystals7
Mechanical Stability of Zirconia Implant Abutments Supporting Cantilevered Fixed Dental Prostheses After Fatigue Loading7
Food Solutions and Cigarette Smoke—Dependent Changes in Color and Surface Texture of CAD/CAM Composite Resins—An In Vitro Study7
Effect of Hydrothermal Aging on the Flexural Strength and Microhardness of Materials Used for Additive or Subtractive Manufacturing of Definitive Restorations7
A Total of 1,132 All-Ceramic Single-Tooth Restorations Show Acceptable Survival Rates up to 15 Years in a Non-University Setting7
Effect of Thermomechanical Fatigue Loading on the Internal and Marginal Adaptation of Endocrowns Utilizing Different CAD/CAM Restorative Materials7
Impact of Finishing Protocol on the Color Stability of CAD/CAM Ceramics: A Systematic Review6
Impact Strength of 3D-Printed and Conventional Heat-Cure and Cold-Cure Denture Base Acrylic Resins6
Complications and Patient Satisfaction in Fully Edentulous Patients Treated with a Digital and Conventional Complete Denture, A Cross-Over Clinical Study6
The Effect of Denture Cleansers on the Surface Roughness of Heat-Polymerized Denture Base Resins Polished by Three Different Techniques6
The Journey of Additive Manufacturing in Prosthodontics from the Early Dawn till the Current State of Art. A Narrative Review6
Effect of Sintering Speed of Large Laboratory Furnaces on Marginal and Internal Gaps of CAD-CAM Monolithic Zirconia Crowns6
Postoperative Rehabilitation with a CAD/CAM-fabricated Occlusal Splint Following Plate Reconstruction after Hemimandibulectomy and Condylectomy: A Case Report6
Comparative Study of Chemical and Mechanical Surface Treatment Effects on Shear Bond Strength of PEEK to Veneering Ceramic6
A Completely Digital Workflow for Nanoceramic Endocrowns: A 5-Year Prospective Study6
Interdisciplinary Rehabilitation Using CAD/CAM Technology for a Young Patient with Severe Malocclusion and Amelogenesis Imperfecta: A 5-Year Follow-up Case Report6
Comparative Mechanical Testing for Digitally Produced Provisional Fixed Partial Dentures vs the Conventional Method: An In Vitro Study6
Evaluation of Accuracy and Position of Milled and 3D-Printed Teeth in Digital Complete Dentures6
Comparative Evaluation of the Reproductive Trueness of Zirconia Crowns Fabricated Using Additive Manufacturing and Conventional Milling6
Effect of Different Universal Bonding Agent Procedures on Repair of Feldspathic and Hybrid Ceramics5
Color stability of pressed lithium disilicate ceramics under repeated firings evaluated by different methods5
Accuracy of Indirect Veneer Mock-Up in Comparison to Diagnostic Wax-Up5
Retrospective Clinical Study of Minimally Invasive Full-Mouth Rehabilitations of Patients with Erosions and/or Abrasions Following the 3-Step Technique. Part 1: 6-year Survival Rates and Technical Out5
Working Models in the Digital Workflow: Are They Reliable?5
Reference CAD-CAM Samples for Dental Shade Communication for Successful Aesthetic Outcome5
Influence of Implant ScanBody Material and Intraoral Scanners on the Accuracy of Complete-Arch Digital Implant Impressions5
Facial Scanner Accuracy with Different Superimposition Methods: An In Vivo Study5
Laser Retrieval of Cemented Zirconia Single- Unit Implant Restoration: A Pilot Study, Part I. Force Values5
Editorial: Dental Ceramics: From Science and Technology to Clinical Application5
Narrow-Diameter Implants for Partial Fixed and Removable Prostheses: A Systematic Review and Meta-Analysis5
In Vitro Comparison of Surface Characteristics and Bacterial Adhesion in Composite Resin-Based Materials for Additive, Subtractive, and Conventional Manufacturing5
Trueness Evaluation of Latest Generation of Intraoral Scanners on Complete-Arch Implant Impressions5
Digital Gothic Arch Tracing Device with Open- Source Software for CAD/CAM Denture Fabrication5
Ceramic Printing— Comparative Study of the Flexural Strength of 3D-Printed and Milled Zirconia5
Influence of Maxillary Anterior Tooth Restoration Labial Thickness on Labial Soft Tissue in Young Asian People5
Load to Failure of High-Density Polymers for Implant-Supported Fixed Cantilevered Prostheses with Titanium Bases4
Oral prosthetic rehabilitation in patients with Epidermolysis Bullosa Hereditaria: a systematic review4
Effect of Aging on the Mechanical Properties of CAD/CAM–Milled and 3D-Printed Acrylic Resins for Denture Bases4
Occlusal veneers and load-bearing capacity of a restored tooth4
Mode of Bond Failure Between 3D-Printed Denture Teeth and Printed Resin Base Material: Effect of Fabrication Technique and Dynamic Loading. An In Vitro Study4
Efficiency of Diamond Rotary Instruments in Cutting Through Zirconia and Lithium Disilicate Restorations4
Maxillary "All-on-six" treatment using zygomatic implants. Bone loss evaluation by cone beam computed tomography; Three years' follow-up4
Static analysis with a realistic loading condition on all-ceramic crown prosthesis during chewing4
Current Concepts for the Treatment of Peri-implant Disease4
Digital Impressions in Edentulous Patients: A Systematic Review for Clinical Evidence4
What Is the Best Tooth-Supported Attachment System for Distal-Extension Removable Partial Dentures? A Systematic Review with Meta-analysis4
Effect of Different Concentrations of Nano Hydroxyapatite on the Microshear Bond Strength of Zirconia to Resin Cement4
Fixed Dental Prostheses on Six Zirconia Implants for an Anterior Maxillary Rehabilitation: Case Report with 10-Year Follow-up4
Editorial: Leading Through Crisis: Reflections from the Helm of an International Professional Organization4
Finite Element Analysis of Stress Distributions for Mandibular Dental Implant-Supported Overdentures with Magnetic Attachments in Osteoporotic and Normal Bone4
Influence of Different Material Substrates on the Accuracy of Three Intraoral Scanners: A Single-Blinded In Vitro Study4
EAO Position Paper: Current Level of Evidence Regarding Zirconia Implants in Clinical Trials4
Analysis of Topography, Flexural Strength, and Microstructure of a Lithium Disilicate Glass- Ceramic after Surface Finishing4
Zirconia Minimally Invasive Partial Retainer Fixed Dental Prostheses: Up to 10-Year Follow-up4
Patient-Reported Outcomes on Different Occlusal Schemes in Complete Denture Wearers3
Quality and Readability Assessment of Internet-Based Information on Common Prosthodontic Treatments3
Malpositioned Implant in the Esthetic Area: The Peri-Implant Plastic Surgery and Angulated Welded Abutment Approach3
Clinical Applications of 3D-Printed Polymers in Dentistry: A Scoping Review3
Assessing Personality Risks profile in Prosthodontics Patients: A Delphi-Driven Classification Approach3
Metal-Ceramic Resin-Bonded Fixed Partial Dentures After a Mean Observation Time of 7.5 Years3
Digital Workflow for Rehabilitation of Severely Discolored Teeth Due to Red Staining from Endodontic Material3
Are Monolithic 3Y-TZP Zirconia Crowns Too Strong for Titanium Implants?3
Risk Factor Assessment for Survival of Removable Partial Dentures and Their Abutment Teeth: A Retrospective Analysis3
Evaluating the Accuracy of Dental Restorations Manufactured by Two CAD/CAM Milling Systems and Their Prototypes Fabricated by 3D Printing Methods: An In Vitro Study3
Influence of Thickness and Thermocycling on Tensile Strength of Two Resin-Based Cements Used for Overdenture Bar-Type Attachments: An In Vitro Study3
Is There "A Best" Centric Relation Record? Centric Relation Records, Condyle Positions, and Their Practical Significance3
The Accuracy of Full-Arch Intraoral Optical Impressions (IOS): Clinical Pilot Study of the Influence of the Scan Strategy, Operator, and Intraoral Scanner3
Evaluation of the Accuracy of Different Intraoral Scanners in Endocrown Restorations3
Nonadaptation to New Mandibular Complete Dentures: A Survival Analysis and Interpretation of the Time to Adaptation3
Dental Implant Positioning Accuracy Using a Key or Keyless Static Fully Guided Surgical System: A Prospective Systematic Review and Meta-analysis3
Comparison of Retention Between Different Duplication Techniques: Conventional Versus CAD/CAM: A Within Subject Controlled Clinical Trial3
A Randomized Clinical Trial Comparing the Clinical Fit of CAD/CAM Monolithic Zirconia Fixed Dental Prostheses on Ti-Base Abutments Based on Digital or Conventional Impression Techniques: 1-Year Follow3
In Vitro Mastication Simulation and Wear Test of Virgilite and Advanced Lithium Disilicate Ceramics3
Clinical Step-By-Step Approach for Posterior Cantilevered Single- Retainer All-Ceramic Resin-Bonded Fixed Dental Prostheses Based on Current Knowledge: A Case Report3
Electromyographic Activity of Masseter Muscles After Complete Denture Rehabilitation in Edentulous Participants3
Fit and Fracture Load of Milled and 3D Printed Composite Onlays, an In Vitro Study3
Evaluation of Masticatory Function, Satisfaction, and Quality of Life Among Users of Complete Dentures Relined with Resilient Materials: A Systematic Review3
Incidence of Caries and Periodontal Disease in Abutment Versus Non-Abutment Teeth Among Removable Partial Dental Prosthesis Wearers: A Systematic Review Utilizing Synthesis without Meta-Analysis3
Stress Distribution on Mucosa Soft Tissue of Alveolar Ridge at the Dislocation of BPS: A Three-Dimensional Finite Element Analysis3
Introducing Our New Editors3
Stresses in Premolars Restored Using Different Post-and-Core and Crown Materials: An FEA Study3
Randomized Trial in Split-Mouth Design to Evaluate the Effectiveness of Manual and Machine-Aided Cleaning of Removable Partial Dentures3
Monomer Elution of Additive and Subtractive Manufactured Resins for Permanent Restorations3
Accuracy of Recording Edentulous Arch Relations Using an Optical Jaw-Tracking System: An In Vitro Study3
Evaluation with a Coordinate-Measuring Machine of Dimensional Accuracy of the Abutment Duplication Technique in Cement- Retained Implant Restoration3
0.1305558681488