Journal of Thermoplastic Composite Materials

Article	Citations
Studying the influence of fused deposition modeling parameters on the yield and impact strength of PLA/graphene/clay composite using Taguchi method	142
Transcrystallization, enhanced interface strength and mechanical properties in PE/(PA6 nanofiber)/graphene oxide thermoplastic polymer-polymer nanocomposites via annealing and increased remolding temp	141
In vitro degradation analysis and mechanical characterization of PLA-CF composites prepared by fused filament fabrication technique for bio-medical applications	52
Multi-scale analysis and structural application of the synergistic enhancement effect of silane coupling agent on the interface between PVA/rubber and cement	46
Preparation and properties of modified zirconium dioxide reinforced poly (butylene adipate-co-terephthalate)	46
Influence of laser texturing on the properties of fusion joints between aluminum alloys and carbon fiber reinforced thermoplastic composites	41
Fracture failure of oil-collecting steel wire reinforced thermoplastic composite pipe	40
Considering initial part quality and injection molding parameters in optimizing the reconsolidation of thermoplastic composite plates	37
Development and characterization of bio-based composite films with matcha powder: Impact of matcha concentration and glutaraldehyde crosslinking on properties	35
Micromechanics-based finite element modeling of damping in hollow spheres/fiber-reinforced polymer composites	35
Recent advances in carbon fiber reinforced Vitrimer composite materials	33
Rheological characterization and optimized predictive modeling of hexagonal boron nitride-enhanced silica-based shear-thickening fluids	31
In situ formation of nanoparticles of silver, copper, and iron and nanocomposite membranes fabricated via interfacial polymerization	31
The performance and influence mechanism of lap joints in carbon fiber reinforced polymer plastic/aluminum alloy hybrid structures reinforced by 3D-printed pins and adhesive bonding	31
Optimization of the electromechanical response properties of silicone rubber composite materials with a three-carbon topological structure	30
Influence of fibre curvature and orientation on the mechanical properties of injected irregular short hemp fibres reinforced polypropylene	29
Electrical impedance spectroscopy (EIS) analysis of carbon black distribution in Co-continuous PP/EVA blend	29
Effects of chemical treatment and gamma-ray irradiation on the structure-properties of sunn hemp and okra hessian cloth reinforced high-density polyethylene composites: A comparative study	29
Optimal shape selection of pseudo-rigid-body model compliant centrifugal clutch manufactured by thermoplastics using TOPSIS approach	29
Towards recycling of carpet textile waste made of hybrid natural and synthetic fibers for thermoplastic composites	28
Investigation of flame retardancy and physical-mechanical properties of mineral-based polyethylene composites	28
Investigation of the mechanical properties of 3D printed polylactic acid fabricated by fused deposition modeling technique	28
Dispersion characterization of nanoparticles in polymer matrices by EIS: PBAT/CNT, PBAT/CNT-OH and PBAT/CNT-COOH	27
Prediction surface roughness of 3D printed parts using genetic algorithm optimized hybrid learning model	27
Damage assessment of laminated composites using unsupervised autonomous features	26

Experimental investigation of warpage in thin CF/PEKK composite laminates consolidated under non-isothermal conditions	25
Crashworthiness performance of 3D printed thermoplastic polymer composite hexagonal multi-cellular tubes: A biomimetic approach for enhanced energy absorption	24
Additive manufacturing of natural fiber reinforced polymer composites - A review	24
Optimizing high-temperature performance of asphalt binder using aromatic thermoplastic resin derived from petroleum feedstock	23
Effect of black sand nanoparticles on physical-mechanical properties of butyl rubber compounds	23
Ecofriendly hybrid natural fiber reinforced polypropylene composites from biowastes	23
Improvement in mechanical and physical properties of starch-based films provided by cellulose nanocrystals extracted from rice straw	22
Sunn hemp hessian cloth reinforced thermoplastic composites: Effects of chemical treatment and gamma-ray irradiation	21
Poly(lactic acid)/poly(ε-caprolactone) blends: Separate effects of nanocalcium carbonate and glycidyl methacrylate on interfacial characteristics	21
Properties of coir fibre/polylactic acid composites based on amylase processing	21
A correlation study on piezo-embedded carbon fibre reinforced polylactic acid composite: Experimental and numerical modelling	21
A novel method for generating random fiber distributions for fiber-reinforced materials	21
Optimization of FDM printing parameters for high-speed fabrication of PLA-ABS Bi-layer laminate structures	20
Effect of line-focused infrared heating-assisted CF/PEEK in-situ consolidation compaction force on interlayer shear strength	20
Bi-directional porous beams under low-velocity impact: Made of carbon fiber reinforced PLA, fabrication with 3D printer and testing with impact equipment	20
Interfacial tailoring of continuous glass fiber reinforced PMMA thermoplastic composites via KH570 surface modification for enhanced mechanical and thermal performance	20
Multi-scale analysis of mechanical properties of RCA based on synergistic modification of carboxylic butadiene-styrene latex and PVA fiber	20
Utilization of crab shell as waste reinforced in thermoplastic elastomer composites for building applications in high humidity conditions	20
Vacuum-bag-only consolidation of C/PEKK fiber placed preforms with engineered gas evacuation channels	19
Nonlinear thermo-mechanical buckling and postbuckling of sandwich FG-GPLRC spherical caps and circular plates with porous core by using higher-order shear deformation theory	19
Tensile and impact properties of thermoplastic fibre hybrid composites based on air textured commingling hybrid yarns composed of carbon/aramid/polyamide 6 and carbon/glass/polyamide 6 filament yarns	19
Prediction of tensile strength for carbon fiber reinforced composites through transfer learning	19
Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing	19
Development and characterization of a recycled nylon fiber reinforced and nano-fly ash hybridized high impact performance polypropylene composite for sustainability	18
Hybrid response surface methodology–particle swarm optimization framework for predictive modeling and tensile strength optimization of PLA bio-composites	17
In-situ consolidation of thermoplastic composites by automated fiber placement: Characterization of defects	17
An experimental study on filling of gaps and void pockets during vacuum-bag-only consolidation of fiber placed preforms	16
Interfacial shear strength of surface functionalized and functionalized CNT coated carbon fiber: A single fiber fragmentation study	16
Evaluation of crystallinity, thermal, mechanical and morphological features of high density polyethylene composites reinforced with crosslinked semifluorinated acrylate polymer microspheres	16
Enhancing mechanical performance of polystyrene carbon composite foams through supercritical CO 2 foaming: An experimental study	16
Structural, linear/non-linear optical, and optoelectrical properties of PVB/Bi 2 WO 6 nanocomposit	16
Study of the mechanical properties and failure behavior of a novel PA12 lattice sandwich structure	16
Experimental study on fire suppression by water film on the exterior facade of concave structures	16
An experimental study on the mechanical behavior of thermoplastic single lap joint bonded using a thermoset-based epoxy film adhesive	16
Simulating performance of tow reinforced hybrid-molded composites	16
Analysis of the steam aging properties of boron nitride reinforced bamboo fiber/high density polyethylene composites	15
Effect of teak wood on recycled HDPE/pine wood composites subjected to termite attack and accelerated weathering	15
A new semi-analytical approach for nonlinear electro-thermo-mechanical dynamic responses of FG-GPLRC shallow spherical caps and circular plates with porous core	15
Application and thermal field analysis of multilayer thermal insulation in in-situ forming process of thermoplastic composites	15
Tribological performance analysis of sustainable basalt micro-filler loaded bio-based polypropylene and high density polyethylene composites	15
Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber	15
Characteristics analysis of friction stir welded grid-patterned 3D-Printed PLA biocomposites reinforced with activated biocarbon	14
Investigation of low-percentage graphene reinforcement on the mechanical behaviour of additively manufactured polyethylene terephthalate glycol composites	14
Influence of the extraction method on the chemical, physical and mechanical characteristics of oil palm (Elaeis guineensis) petiole fibers for the reinforcement of composite materials	14
On printability of barium titanate reinforced PVDF nano ink for smart and flexible sensors: Rheological and concentration view point	14
Valorization of agro-industrial residues for PLA-based biocomposites: Role of MAPP compatibilization in mechanical and thermal optimization	14
A micromechanics-based model for temperature-dependent heat conduction of silver nanowire/aligned short fiber-reinforced polymer nanocomposites	14
Bioinspired design and metaheuristic driven process optimization of FDM printed PETG–TPU thermoplastic composites for improved mechanical performance	14
Constructing mechanically robust and self-repairable ENR/PP vitrimer composites via interfacial β-hydroxy ester bonding with silica nanofillers	14
Unraveling the blend composition influence on crystallization, melting, thermal stability and rheological behavior of PMMA/EVA/MWCNTs nanocomposites	13

Grey relational approach to investigate the physio-mechanical characteristics of 3D printed multi-material polyamide-carbon fibre and polyamide-glass fibre composite structures	13
Crystallization and crystal morphology of polymers: A multiphase-field study	13
Non-isothermal crystallization kinetics of ethylene-vinyl acetate copolymer and ethylene-vinyl acetate copolymer/butadiene rubber thermoplastic vulcanizate	13
Non-Coking coal as an additive to enhance properties of groundnut shell reinforced polypropylene composites	13
Additive manufacturing of polymer gears: A review on FDM materials, parameters, and performance	13
Structural, electrical and magnetoresistance feature of PP+Fe 3 O 4 + Multi-walled carbon nanotube	12
Enhanced thermal, antimicrobial, water-resistance, and tensile properties of PVA packaging films reinforced with iron oxide nanofillers synthesized from spinach biomass extracts	12
Green synthesis of boehmite-reinforced cashew gum/polypyrrole biopolymer blend for advanced biomaterials	12
Analysis of engineering performance of concrete comprising recycled crushed plastic waste and fly ash	12
Microstructural and mechanical investigations regarding the formability of glass fiber reinforced thermoplastic pultruded profiles	12
Hybrid PVA composites with basalt fiber and functionalized biocarbon: Mechanical strengthening and EMI shielding efficiency	12
Flame retarded plasticized poly(lactic acid) using phosphorus-based additives	12
Understanding a frequency shifting phenomenon interfering with in-line acoustic monitoring of an extrusion compounding process for polymer composites	12
Effect of tool geometry variations on weld bead structure and mechanical properties of friction stir welding of dissimilar material Acrylonitrile Butadiene Styrene and polystyrene sheets thermoplastic	12
Geometric optimization of the crashworthiness performance of 3D-printed PLA-GF tubes with square-to-circular transitions via squircle geometry	12
A study on the influence of nano-c-BN on the physical and mechanical characteristics of PMMA biocomposites used in dental prosthetics	12
Research progress on advanced carbon fiber reinforced composite honeycomb structures	12
Analysis and optimization of the delamination factor in the drilling of wood-thermo plastic composites: An approach based on artificial intelligence	11
A novel application of titanium suboxide to enhance the flame retardancy, thermal stability, and thermal and electrical conductivity of silicone rubber	11
Simple construction of PVA hydrogels based on dehydration drying method via polydopamine-modified graphene nanocomposites	11
Effects of thermo-oxidative aging on microstructure and electrical properties of polypropylene blends	11
Fabrication and properties investigation of flame retardant rigid polyurethane composites based on converter OG sludge (a metallurgical by-product): A novel strategy for solid waste utilization	11
Bagasse fiber reinforced chemically functionalized polystyrene composites	11
Mechanical properties and discrete element simulation of KH-560 modified polystyrene concrete	11
Mechanical property degradation of additively manufactured polylactide produced from no-blend recycled feedstock	11
Status of art and prospects in cutting force modeling and control optimization strategies for carbon fiber reinforced polymer (CFRP)	11
Integration of titanium dioxide into EVA/organoclay nanocomposites: Structural behavior and response to ultraviolet light	11
Effects of the molecular weight of soft segment of polycaprolactone polyurethane prepolymer on the properties of polyurethane composites with high wood content	11
Properties and application of PLA/mung bean starch composites: Effect of the soft segment molecular weight of PCL-based polyurethane prepolymer	11
Development of bio-reinforced PLA filaments using short bamboo fibers for enhanced mechanical performance in FDM 3D printing	11
Achieving performance and functionality in PLA-based packaging: Insights from hybrid composites with false banana (Enset) fiber and ZnO nanoparticles	11
Covalently grafted graphene oxide on carbon fibers: An innovative strategy for significantly enhancing CF/PEEK interface properties	11
Optimization through combined compromise solution and weight determination through SHANNON-ENTROPY for multi criteria decision making in tribological testing of ultrahigh molecular weight polyethylene	10
Process-induced skewness of flow fronts and fiber orientations in LFT-D compression molding considering processing, characterization, and simulation	10
Tribological performance and wear behavior of PETG/Fe 3 O 4 nanocomposites	10
Development of sustainable PCL/rice husk–derived SiO 2 composites through fused filament fabrication: Mechanical, degradation, and antibacterial perf	10
Fabrication and performance evaluation of sustainable flax fiber-reinforced HDPE bio-composites: A path toward reducing plastic waste	10
Toward sustainable polymer composites: Synergetic effects of surface-treated Mimusops elengi seed shell powder on polypropylene properties	10
Effects of top ply orientation and a resin-rich interface layer on the strength of LMPAEK-CF/PEEK-CF overmoulded joints	10
Isogeometric analysis of secondary thermal buckling in composite laminates using Reddy’s higher-order shear deformation theory	10
Research on the performance of three-dimensional-braided-glass fiber reinforced in-situ polymerized TPU	10
Effect of gamma irradiation on optical and electronic properties of PVC/CoSe/TiO 2 nanocomposites	10
Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder	10
Nature-inspired solutions: A comprehensive review of biomimetic nanoparticles in nanomedicine	10
Effect of fire-retardant coating on bamboo and banana-based biocomposites: A comparative study thermogravimetric analysis and cone calorimeter tests	10
Dynamic mechanical analysis of PA 6 under hydrothermal influences and viscoelastic material modeling	10
Influence of surface treatments and addition of a reactive agent on the properties of PLA/flax and PLA/bamboo composites	10
Fabrication and characterization of PEKK nanocomposites: An in vitro study	10
Modelling and fabrication of flexible strain sensor using the 3D printing technology	10
Physicochemical and antimicrobial characteristics of polypropylene-based nanocomposite containing SiO 2 -Ag nanoparticles prepared by gamma irradiati	10
Influence of fiber concentration and length on the dielectric, mechanical, and thermal properties of maple wood fiber-reinforced polypropylene	10
Multi-objective process parameter optimization for induction heating curing of carbon fiber reinforced polymer wound circular tubes	10
Investigating effect of tool geometry on drilling performance of carbon fiber-reinforced polypropylene thermoplastic composite	10
Fabrication of Electrospun Exfoliated Graphite Nanosheets/Polystyrene composite nanofiber mats	10
Techniques, applications, and prospects of recycled polyethylene terephthalate bottle: A review	10
Formation and occurrence of subsurface damage mechanism with the analysis of optimal machining strategy when milling different fibre matrix combination of unidirectional FRP’s	10
It’s not waste, it’s a resource: Utilizing industrial waste fibers/mineral fillers to attain flame retardant biocomposites	10
On secondary recycling of high-density polyethylene with reinforcement of stubble powder by a material extrusion process for construction applications	9
Enhancing the machinability of recycled polypropylene composites reinforced with waste cotton and pine sawdust through milling parameters optimization	9
Kenaf fiber reinforced chemically functionalized styrene-acrylonitrile composites	9
Expression of Concern	9
Investigating the low velocity impact response of additively manufactured tri-material composite structure with application on helmet	9
Numerical simulation analysis of forming of continuous fiber reinforced polypropylene composites: Relaxation, creep, and hot stamping	9
Sustainable natural biopolymers for biomedical applications	9
Hygrothermal aging effects on tribological and mechanical behaviors of mollusc shell-reinforcement UHMWPE biocomposites	9
Mechanical and viscoelastic properties of basalt-hemp hybrid reinforced polypropylene	9
Quality improvement of Nd: YAG laser marked DMC and QR codes on the surface of PBT/glass fiber composites by DOE methodology	9
Fabrication of co-continuous morphology of polysulfone/nylon 6, 6 nanocomposites by varying the concentration of organically modified clay content	9
Effect of cryogenic treatment on mechanical, thermal and microstructural characteristics of PEEK reinforced with CNT and graphene nanofillers	9
Comparative study on low velocity impact behavior of natural hybrid and non hybrid flexible thermoplastic based composites	9
Preparation, characterization and antimicrobial activity of sodium carboxymethyl cellulose - based hydrogels by freeze-thaw method	9
In situ interlaminar shear behavior of carbon fibers reinforced polymer composites exposed to severe thermal aggressions: PPS versus epoxy laminates	9
Mechanical behavior and failure mechanisms of FDM-printed PETCF-15 composites: An experimental and finite element study	9
Regulatory mechanism of medium characteristics on defect evolution and mechanical properties in friction stir welded CFRP joints	8
Biodegradable carboxymethyl cellulose based material for sustainable/active food packaging application	8
Vibrational and dynamic properties of PLA/GF composites influenced by the synergistic effect of infill geometry and density	8
Assessing the performance characteristics of aluminum-doped PLA composites after exposure to environmental conditions	8
On digital twinning of fused filament fabrication for tensile properties of polyvinylidene fluoride composites-based functional prototypes	8
Nonlinear thermo-mechanical static and dynamic buckling responses of functionally graded porous graphene-reinforced spherical shells and circular plates with spider-web stiffeners	8
Reviewing the manufacturing challenges and scientific debates: Insights into the antibacterial capabilities and potential applications of PLA/ZnO nanocomposites	8

Effects of carbon-based nanofillers on mechanical, electrical, and thermal properties of bast fiber reinforced polymer composites	8
A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites	8
Machinability of wood-plastic composites from the CNC milling process using the Box-Behnken design and response surface methodology for building applications	8
Comparative study of mechanical behaviors of additively manufactured continuous fiber-reinforced thermoplastic composites undergoing flexural and mode I fracture	8
Synthesis and characterization of novel bitumen additive based on waste oils for enhanced asphalt performance	8
Biodegradable starch-polyvinyl alcohol composite films by the incorporation of lignin for packaging applications	8
Fly ash incorporation in polypropylene/ethylene-vinyl-acetate (PP/EVA) blends: An in-depth morphological and performance study	8
Processing and characterization of thermoplastic polyurethane composites filled with graphene oxide produced by laser sintering	8
Development of paving slab product manufactured from thermoplastic elastomer composites reinforced with crab shell particles for out-door application	8
Current application of recycled waste plastics as a sustainable materials: A review on availability, processing and application	8
Optimal blending ratios of natural rubber latex and acrylic emulsion for coating applications	8
Application of titanium dioxide nanorod (TNr)@SiO 2 with low photocatalytic effect and high UV resistance in poly(vinyl chloride) film	8
Mechanical properties of calcium phosphate reinforced polyhydroxyalkanoate (PHA) biocomposite	8
Multi-scale analysis of styrene butadiene latex modified PVA fiber concrete	8
Response surface optimization of melt blending behaviour in PLA-wild almond fibre composites for enhanced processability	8
Cellulose esterified with low molecular weight PBT and its composites with PBAT	8
In-situ monitoring of the vacuum-bag-only consolidation process of CF/LM-PAEK composites with an embedded Fibre Bragg Grating sensor	8
Rheological evaluation and storage stability of asphalt modified with novel high elastic modifiers	8
Influence of temperature on the compression performance and failure modes of PETG-CF honeycomb structures	8
Studying the influence of friction stir welding parameters on the mechanical properties of PP/EPDM/Clay nanocomposites by response surface methodology combined with desirability function approach	8
Thermal and viscoelastic behaviors of recycled polyvinyl chloride/styrene-acrylonitrile blend composites incorporating treated date palm fibers	8
Effects of barium stearate-modified wollastonite fibers on processability, mechanical performance and ceramization behavior of EVA composites	8
Prediction of tensile strength of PLA parts produced with FDM using Taguchi L27, ANOVA, and large-scale machine learning models and optimal parameter design	8
Mechanical performance and failure mechanisms of biochar-reinforced recycled polypropylene composites	7
Preparation and characterization of polyimide-modified carbon fiber-reinforced polyetheretherketone composites	7
Machine learning-based approach for predicting the compressive strength of 3D printed hexagon lattice-cored sandwich structures	7
Fused deposition modeling of PLA/TCP/ZnO composites for enhanced orthopedic applications	7
Mechanical properties, hysteretic behavior, and healing efficiency of a bio-based thermoplastic composite leaf spring	7
Improving the material extrusion processing of thermoplastic olefin/graphene nanoplatelet composites through control of the morphology	7
High-temperature macro-molecular polymer composites for automotive applications: A critical review of sustainable matrices and performance	7
Advancements and environmental impacts of plasticizers: A comprehensive review of current trends and sustainable alternatives	7
Effect of infill pattern and filler ratio on the mechanical properties of 3D printed eco-friendly wollastonite/polylactic acid composites	7
Numerical and experimental crashworthiness assessment of carbon-fiber reinforced thermoplastic energy absorbers	7
Advances in thermoplastic polymers for 3D-printed medical devices: Balancing mechanical performance and biocompatibility	7
Research progress of five biodegradable plastics reinforced with different plant fillers	7
Influence of date-palm-fibers (DPFs) content and nanocrystallite FeCrCuMnTi high-entropy alloy fillers in polypropylene matrix on mechanical and structural performance of thermoplastic composite mater	7
Optimizing the multifunctional properties of a laser-melted PLA/HDPE/SiO 2 /GPN nanocomposite using response surface methodology	7
Effect of packing pressure on stagnation weld-line strength for thermoplastic semicrystalline glass fiber reinforced material	7
A comparative study on the impact of graphene oxide and reduced graphene oxide in polypropylene composites	7
Improved thermal conductivity, mechanical, and flammability properties of polypropylene/hexagonal boron nitride/silicon carbide nanocomposites using a titanate-based coupling agent	7
Antimicrobial membrane surface modification by copper-doped polysaccharide coating on ultrafiltration membrane for advanced wastewater treatment	7
Experimental investigation and optimization of fused filament fabrication parameters for enhanced mechanical performance of PETG and carbon fiber-reinforced PETG composites	7
Study on the properties of EPS composite concrete enhanced by silane coupling agent: Experiment and molecular simulation	7
Effect of filler surface treatment on the physico-mechanical properties of filler/styrene-butadiene rubber nanocomposites	7
The importance of extensional viscosity on a peculiar ear-flow front for injection molding simulations of fiber-reinforced composites	7
Adsorption of chlorpyrifos in water using polyaniline/graphene oxide composites	7
Stimuli-responsive nanofiller-based shape memory polymer composites: Actuation methods and biomedical applications	7
Microscale equivalent modeling and experimental validation of CCF/PLA using a 100-to-1 downscaling strategy	7
Additive-manufactured PLA scaffolds reinforced with agro-waste cellulose and microfiber: Toward high-performance bone regeneration biomaterials	7