Journal of Biomaterials Applications

Papers
(The median citation count of Journal of Biomaterials Applications is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Biomedical applications of tannic acid47
RGD peptide-mediated liposomal curcumin targeted delivery to breast cancer cells45
Electrospinning of bioactive polycaprolactone-gelatin nanofibres with increased pore size for cartilage tissue engineering applications44
Electrospinning of polyurethane/graphene oxide for skin wound dressing and its in vitro characterization35
Combination of an allogenic and a xenogenic bone substitute material with injectable platelet-rich fibrin – A comparative in vitro study34
Effects of different sulfonation times and post-treatment methods on the characterization and cytocompatibility of sulfonated PEEK34
Intercalation of curcumin into liposomal chemotherapeutic agent augments apoptosis in breast cancer cells32
Application of rare earth-doped nanoparticles in biological imaging and tumor treatment27
Fabrication of piezoelectric porous BaTiO3 scaffold to repair large segmental bone defect in sheep24
Alginate/cartilage extracellular matrix-based injectable interpenetrating polymer network hydrogel for cartilage tissue engineering23
Wet-electrospun PHBV nanofiber reinforced carboxymethyl chitosan-silk hydrogel composite scaffolds for articular cartilage repair22
Conjugating heparin, Arg–Glu–Asp–Val peptide, and anti-CD34 to the silanic Mg–Zn–Y–Nd alloy for better endothelialization22
Bone marrow-derived mesenchymal stem cells and extracellular vesicles enriched collagen chitosan scaffold in skin wound healing (a rat model)21
Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration21
Fabrication of sliver nanoparticles/polyvinyl alcohol/gelatin ternary nanofiber mats for wound healing application20
3D printable Sodium alginate-Matrigel (SA-MA) hydrogel facilitated ectomesenchymal stem cells (EMSCs) neuron differentiation20
High-purity magnesium pin enhances bone consolidation in distraction osteogenesis model through activation of the VHL/HIF-1α/VEGF signaling20
Collagen membranes for skin wound repair: A systematic review19
The eggshell membrane: A potential biomaterial for corneal wound healing18
Mechanical properties and osteoblast proliferation of complex porous dental implants filled with magnesium alloy based on 3D printing18
Porous shape memory scaffold of dextran and hydroxyapatite for minimum invasive implantation for bone tissue engineering applications17
Bioactive anti-oxidative polycaprolactone/gelatin electrospun nanofibers containing selenium nanoparticles/vitamin E for wound dressing applications17
Emulsion-free chitosan–genipin microgels for growth plate cartilage regeneration16
Targeted PD-L1 PLGA/liposomes-mediated luteolin therapy for effective liver cancer cell treatment16
A review on alginate-based bioinks, combination with other natural biomaterials and characteristics16
Nerve growth factor loaded macrophage-derived nanovesicles for inhibiting neuronal apoptosis after spinal cord injury16
A review of graphene quantum dots and their potential biomedical applications16
Surface functionalized mesoporous silica nanoparticles for intravitreal application of tacrolimus16
PVA/anionic collagen membranes as drug carriers of ciprofloxacin hydrochloride with sustained antibacterial activity and potential use in the treatment of ulcerative keratitis16
Osteoconductivity of bioactive Ti-6Al-4V implants with lattice-shaped interconnected large pores fabricated by electron beam melting16
A review of functionalised bacterial cellulose for targeted biomedical fields15
In vitro characterization of xeno-free clinically relevant human collagen and its applicability in cell-laden 3D bioprinting15
ICG/5-Fu coencapsulated temperature stimulus response nanogel drug delivery platform for chemo-photothermal/photodynamic synergetic therapy15
Osteogenic capability of strontium and icariin-loaded TiO2 nanotube coatings in vitro and in osteoporotic rats15
In vitro study of antibacterial and osteogenic activity of titanium metal releasing strontium and silver ions15
Palmatine-loaded electrospun poly(ε-caprolactone)/gelatin nanofibrous scaffolds accelerate wound healing and inhibit hypertrophic scar formation in a rabbit ear model15
Gold embedded chitosan nanoparticles with cell membrane mimetic polymer coating for pH-sensitive controlled drug release and cellular fluorescence imaging15
Antimicrobial dressing of silver sulfadiazine-loaded halloysite/cassava starch-based (bio)nanocomposites14
GSH triggered intracellular aggregated-cisplatin-loaded iron oxide nanoparticles for overcoming cisplatin resistance in nasopharyngeal carcinoma14
Cerium oxide nanomaterial with dual antioxidative scavenging potential: Synthesis and characterization14
Relationships between the material properties of silicone hydrogels: Desiccation, wettability and lubricity14
Thermosensitive injectable decellularized nucleus pulposus hydrogel as an ideal biomaterial for nucleus pulposus regeneration13
In vivo evaluation of biocompatibility and immune modulation potential of poly(caprolactone)–poly(ethylene glycol)–poly(caprolactone)-gelatin hydrogels enriched with nano-hydroxyapatite in the model o13
Preparation of biocompatible wound dressings with dual release of antibiotic and platelet-rich plasma for enhancing infected wound healing13
Prevention of urinary infection through the incorporation of silver–ricinoleic acid–polystyrene nanoparticles on the catheter surface13
Fabrication of multilayer tubular scaffolds with aligned nanofibers to guide the growth of endothelial cells13
Two methods for constructing ZIF-8 nanomaterials with good bio compatibility and robust antibacterial applied to biomedical12
PEG-α-CD/AM/liposome @amoxicillin double network hydrogel wound dressing—Multiple barriers for long-term drug release12
Efficacy, safety, and physicochemical properties of a flowable hemostatic agent made from absorbable gelatin sponge via vacuum pressure steam sterilization12
Tantalum-containing mesoporous bioactive glass powder for hemostasis12
Progress of biomaterials for bone tumor therapy12
Electrospun PLGA and PLGA/gelatin scaffolds for tubularized urethral replacement: Studies in vitro and in vivo12
Polyethylene glycol diacrylate scaffold filled with cell-laden methacrylamide gelatin/alginate hydrogels used for cartilage repair12
Fabrication of 3D Printed poly(lactic acid) strut and wet-electrospun cellulose nano fiber reinforced chitosan-collagen hydrogel composite scaffolds for meniscus tissue engineering12
Bioartificial injectable cartilage implants from demineralized bone matrix/PVA and related studies in rabbit animal model12
Targeted gold nanoshelled hybrid nanocapsules encapsulating doxorubicin for bimodal imaging and near-infrared triggered synergistic therapy of Her2-positve breast cancer11
Pharmaceutical evaluation of atorvastatin-loaded nanostructured lipid carriers incorporated into the gelatin/hyaluronic acid/polycaprolactone scaffold for the skin tissue engineering11
3D bioprinted GelMA/GO composite induces osteoblastic differentiation11
A new hydrophilic biodegradable ureteral stent restrain encrustation both in vitro and in vivo11
Preparation and characterization of chitosan/carboxymethyl pullulan/bioglass composite films for wound healing11
Decellularized human amniotic membrane reinforced by MoS2-Polycaprolactone nanofibers, a novel conductive scaffold for cardiac tissue engineering11
Developing a novel magnesium calcium phosphate/sodium alginate composite cement with high strength and proper self-setting time for bone repair11
Conductive, self-healing, and antibacterial Ag/MXene-PVA hydrogel as wearable skin-like sensors11
Nb-Ti-Zr alloys for orthopedic implants11
Fabricating a pre-vascularized large-sized metabolically-supportive scaffold using Brassica oleracea leaf11
In vitro evaluation of bone cements impregnated with selenium nanoparticles stabilized by phosphatidylcholine (PC) for application in bone11
Phenolated alginate-collagen hydrogel induced chondrogenic capacity of human amniotic mesenchymal stem cells11
Progress in the application of spider silk protein in medicine10
Composite sponges from sheep decellularized small intestinal submucosa for treatment of diabetic wounds10
Polydopamine-doped virus-like mesoporous silica coated reduced graphene oxide nanosheets for chemo-photothermal synergetic therapy10
Development of a chitosan and hyaluronic acid hydrogel with potential for bioprinting utilization: A preliminary study10
Three dimensional polyvinyl alcohol scaffolds modified with collagen for HepG2 cell culture10
Biological and mechanical evaluation of mineralized-hydrogel scaffolds for tissue engineering applications10
PEGDA/HA mineralized hydrogel loaded with Exendin4 promotes bone regeneration in rat models with bone defects by inducing osteogenesis10
Human amniotic membrane as a multifunctional biomaterial: recent advances and applications10
Co-delivery of the autophagy inhibitor si-Beclin1 and the doxorubicin nano-delivery system for advanced prostate cancer treatment10
Plant based cross-linkers for tissue engineering applications10
Oral delivery of liraglutide-loaded Poly-N-(2-hydroxypropyl) methacrylamide/chitosan nanoparticles: Preparation, characterization, and pharmacokinetics10
Metal doped calcium silicate biomaterial for skin tissue regeneration in vitro10
Improving corrosion resistance and biocompatibility of AZ31 magnesium alloy by ultrasonic cold forging and micro-arc oxidation9
Influence of gelatin and collagen incorporation on peroxidase-mediated injectable pectin-based hydrogel and bioactivity of fibroblasts9
Lidocaine-loaded reduced graphene oxide hydrogel for prolongation of effects of local anesthesia: In vitro and in vivo analyses9
In vitro characterization of novel multidrug-eluting soy protein wound dressings9
Multi-network granular hydrogel with enhanced strength for 3D bioprinting9
Genipin crosslinked chitosan/PEO nanofibrous scaffolds exhibiting an improved microenvironment for the regeneration of articular cartilage9
Marine spongin incorporation into Biosilicate® for tissue engineering applications: An in vivo study9
The improvement of biocompatibility by incorporating porphyrins into carbon dots with photodynamic effects and pH sensitivities9
Magnetic nanostructured lipid carrier for dual triggered curcumin delivery: Preparation, characterization and toxicity evaluation on isolated rat liver mitochondria9
A novel natural-derived tilapia skin collagen mineralized with hydroxyapatite as a potential bone-grafting scaffold9
Gelatin/poly(vinyl alcohol) based hydrogel film – A potential biomaterial for wound dressing: Experimental design and optimization followed by rotatable central composite design9
Antibacterial activities and cell responses of Ti–Ag alloys with a hybrid micro- to nanostructured surface8
Biocompatibility study of modified injectable hyaluronic acid hydrogel with mannitol/BSA to alveolar bone cells8
Long-term antibacterial activity of a composite coating on titanium for dental implant application8
Preparation and antitumor activity of triphenylphosphine-based mitochondrial targeting polylactic acid nanoparticles loaded with 7-hydroxyl coumarin8
IGF-1 loaded injectable microspheres for potential repair of the infarcted myocardium8
Preparation, characterization, and in vitro release kinetics of doxorubicin-loaded magnetosomes8
Macroscopic and histologic evaluation of cartilage regeneration treated using xenogenic biodegradable porous sponge cartilage scaffold composite supplemented with allogenic adipose derived mesenchymal8
Fabrication and characterization of an acellular annulus fibrosus scaffold with aligned porous construct for tissue engineering8
A novel degradable tricalcium silicate/calcium polyphosphate/polyvinyl alcohol organic-inorganic composite cement for bone filling8
A novel biocomposite scaffold with antibacterial potential and the ability to promote bone repair8
Injectable in situ intelligent thermo-responsive hydrogel with glycyrrhetinic acid-conjugated nano graphene oxide for chemo-photothermal therapy of malignant hepatocellular tumor8
Development of biological meniscus scaffold: Decellularization method and recellularization with meniscal cell population derived from mesenchymal stem cells8
Enhanced vascularization and biocompatibility of rat pancreatic decellularized scaffolds loaded with platelet-rich plasma8
Construction of novel amphiphilic chitosan-polylactide graft copolymer nanodroplets for contrast enhanced ultrasound tumor imaging8
Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite8
Amniotic membrane allografts maintain key biological properties post SCCO2 and lyophilization processing8
Surface modification of titanium manufactured through selective laser melting inhibited osteoclast differentiation through mitogen-activated protein kinase signaling pathway8
Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide7
Antimicrobial and antibiofilm activities of meropenem loaded-mesoporous silica nanoparticles against carbapenem-resistant Pseudomonas aeruginosa7
Antitumor activity of iRGD-modified red blood cell membrane nanoparticles loaded with Juglone and Oxaliplatin against colorectal cancer7
In vitro drug release and antibacterial activity evaluation of silk fibroin coated vancomycin hydrochloride loaded poly (lactic-co-glycolic acid) (PLGA) sustained release microspheres7
Fabrication of chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold for microtia reconstruction7
Photocatalytic activity and antibacterial efficacy of UVA-treated titanium oxides7
A keratin-based microparticle for cell delivery7
Adjusting the accuracy of PEGDA-GelMA vascular network by dark pigments via digital light processing printing7
Preparation of bioactive and antibacterial PMMA-based bone cement by modification with quaternary ammonium and alkoxysilane7
Further structural characterization of ovine forestomach matrix and multi-layered extracellular matrix composites for soft tissue repair7
Preparation and biological properties of ZnO/hydroxyapatite/chitosan-polyethylene oxide@gelatin biomimetic composite scaffolds for bone tissue engineering7
An enzyme-responsive Gp1a-hydrogel for skin wound healing7
A functional coating to enhance antibacterial and bioactivity properties of titanium implants and its performance in vitro7
Preparation of gelatin-based hydrogels with tunable mechanical properties and modulation on cell–matrix interactions7
Layered dermal reconstitution through epigallocatechin 3-gallate loaded chitosan nanoparticle within enzymatically crosslinked polyvinyl alcohol/collagen fibrous mat7
Nanostructured-lipid carriers-Chitosan hydrogel beads carrier system for loading of resveratrol: A new method of topical application7
Biomimetic bone-like composites as osteo-odonto-keratoprosthesis skirt substitutes7
Hollow cathode plasma nitriding of medical grade Ti6Al4V: A comprehensive study7
Compressive properties and failure behavior of photocast hydroxyapatite gyroid scaffolds vary with porosity7
Prevention of intra-abdominal adhesions by a hyaluronic acid gel; an experimental study in rats7
Biomineralizaion of hydroxyapatite on polyethylene terephthalate artificial ligaments promotes graft-bone healing after anterior cruciate ligament reconstruction: An in vitro and in vivo study7
Evolution of silicate bioglass particles as porous microspheres with a view towards orthobiologics7
Citric acid coated ultrasmall superparamagnetic iron oxide nanoparticles conjugated with lactoferrin for targeted negative MR imaging of glioma7
Poly(aspartic acid)-based pH-responsive targeting co-delivery nanoparticles6
Use of bacterial cellulose film for repair of bile duct injury in pigs6
Bi-layered nanofibrous membrane with osteogenic and antibacterial functions for periodontal tissue regeneration6
Improved antibacterial and cellular response of electrets and piezobioceramics6
A nano chitosan membrane barrier prepared via Nanospider technology with non-toxic solvent for peritoneal adhesions’ prevention6
In vitro performance of 3D printed PCL−β-TCP degradable spinal fusion cage6
Chitosan nanoparticles containing fusion protein (Hspx–PPE44–EsxV) and resiquimod adjuvant (HPERC) as a novel booster vaccine for Mycobacterium tuberculosis6
Photobiomodulation associated with lipid nanoparticles and hyaluronic acid accelerate the healing of excisional wounds6
Physical and biological performances of a semi-resorbable barrier membrane based on silk fibroin-glycerol-fish collagen material for guided bone regeneration6
Human epidermal growth factor-functionalized cocoon silk with improved cell proliferation activity for the fabrication of wound dressings6
Ameliorating hydroxychloroquine induced retinal toxicity through cerium oxide nanoparticle treatments6
3D printed biocompatible graphene oxide, attapulgite, and collagen composite scaffolds for bone regeneration6
Preparation and characterization of antibacterial and anti-inflammatory hyaluronic acid-chitosan-dexamethasone hydrogels for peri-implantitis repair6
Synthesis of casein-γ-polyglutamic acid hydrogels by microbial transglutaminase-mediated gelation for controlled release of drugs6
PHMB-loaded PDMS and its antimicrobial properties for biomedical applications6
Herceptin-conjugated magnetic polystyrene-Agsbox nanoparticles as a theranostic agent for breast cancer6
Silk fibroin-based vascular repairing sheet with angiogenic-promoting activity of SVVYGLR peptide regenerated the damaged vascular in rats6
An integrated strategy for designing and fabricating triple-layer vascular graft with oriented microgrooves to promote endothelialization6
Mouse ovarian follicle growth in an amniotic membrane-based hydrogel6
Injectable metronidazole-eluting gelatin-alginate hydrogels for local treatment of periodontitis5
Gene-modified BMSCs encapsulated with carboxymethyl cellulose facilitate osteogenesis in vitro and in vivo5
Improved porosity of electrospun poly (Lactic-Co-Glycolic) scaffolds by sacrificial microparticles enhances cellular infiltration compared to sacrificial microfiber5
Fabrication, characterization and evaluation of the efficacy of gelatin/hyaluronic acid microporous scaffolds suffused with aloe-vera in a rat burn model5
RETRACTED: Stimulus-responsive tea polyphenols as nanocarrier for selective intracellular drug delivery5
The effect of LDHs nanoparticles on the cellular behavior of stem cell-laden 3D-bioprinted scaffold5
Effects of pullulan on the biomechanical and anti-collapse properties of dicalcium phosphate dihydrate bone cement5
Porous membranes of quaternized chitosan composited with strontium-based nanobioceramic for periodontal tissue regeneration5
Multifunctional MnCuInSe/ZnS quantum dots for bioimaging and photodynamic therapy5
Application potential of three-dimensional silk fibroin scaffold using mesenchymal stem cells for cardiac regeneration5
The anti-inflammatory and osteogenic activity of chitosan/polyvinyl alcohol/graphene oxide/astaxanthin nanofibers membranes in vitro study5
Electrospun Polycaprolactone (PCL)-Amnion Nanofibrous Membrane Promotes Nerve Repair after Neurolysis5
Local administration with tauroursodeoxycholic acid could improve osseointegration of hydroxyapatite-coated titanium implants in ovariectomized rats5
Chitosan/Xanthan/Hydroxyapatite-graphene oxide porous scaffold associated with mesenchymal stem cells for dentin-pulp complex regeneration5
A generalizable strategy for crosslinkable albumin-based hydrogels and application as potential anti-tumor nanoplatform5
Preparation and evaluation of an injectable curcumin loaded chitosan/hydroxyapatite cement5
Crosslinking porcine aortic valve by radical polymerization for the preparation of BHVs with improved cytocompatibility, mild immune response, and reduced calcification5
Bacterial cellulose: Biopolymer with novel medical applications5
Cytocompatibility, stability and osteogenic activity of powder metallurgy Ta-xZr alloys as dental implant materials5
In situ forming hydrogel recombination with tissue adhesion and antibacterial property for tissue adhesive5
3D printed high-resolution scaffold with hydrogel microfibers for providing excellent biocompatibility5
Impact of electrostatic potential on microcapsule-formation and physicochemical analysis of surface structure: Implications for therapeutic cell-microencapsulation5
Poly (ε-caprolactone)/Poly (lactic acid) fibers produced by rotary jet spinning for skin dressing with antimicrobial activity5
Biophysical properties of electrospun chitosan-grafted poly(lactic acid) nanofibrous scaffolds loaded with chondroitin sulfate and silver nanoparticles5
Magnetosome yield characteristics modeling of acidithiobacillus ferrooxidans in airlift bioreactor using response surface methodology5
Biomechanical effects of reconstruction of the posterior structures after laminectomy with an individualized poly-ether-ether-ketone (PEEK) artificial lamina5
Cerium oxide nanoparticles protect red blood cells from hyperthermia-induced damages5
Printability assessment of psyllium husk (isabgol)/gelatin blends using rheological and mechanical properties5
Characterisation of the physical, chemical and mechanical properties of a radiopaque polyethylene5
Effects of radiation dose and nitrogen purge on collagen scaffold properties4
The incorporation of β-tricalcium phosphate nanoparticles within silk fibroin composite scaffolds for enhanced bone regeneration: An in vitro and in vivo study4
Preparation of Codonopsis pilosula polysaccharide microcapsules and its effect and mechanism on skin wound healing in rats4
Optimization of extracellular matrix extraction from human perirenal adipose tissue4
Synthesis of near-infrared-responsive hexagonal-phase upconversion nanoparticles with controllable shape and luminescence efficiency for theranostic applications4
Multi-layered in vitro 3D-bone model via combination of osteogenic cell sheets with electrospun membrane interlayer4
3D-printed construct from hybrid suspension as spatially and temporally controlled protein delivery system4
Osteoblastic differentiation and bactericidal activity are enhanced by erythromycin released from PCL/PLGA-PVA coaxial nanofibers4
An asymmetric wettable PCL/chitosan composite scaffold loaded with IGF-2 for wound dressing4
Dual setting brushite—gelatin cement with increased ductility and sustained drug release4
A new cell-sized support for 3D cell cultures based on recombinant spider silk fibers4
Design of size uniform and controllable covalent organic framework nanoparticles for high-performance anticancer drug delivery4
Hybrid nanocomposite as a chest wall graft with improved vascularization by copper oxide nanoparticles4
Application of biomaterials and tissue engineering in bladder regeneration4
Assessment of mechanical and biocompatible performance of ultra-large nitinol endovascular devices fabricated via a low-energy laser joining process4
Low-intensity pulsed ultrasound promotes cell viability and inhibits apoptosis of H9C2 cardiomyocytes in 3D bioprinting scaffolds via PI3K-Akt and ERK1/2 pathways4
Continuous antimicrobial mechanism of dispersible hydroxyapatite nanoparticles doped with zinc ions for percutaneous device coatings4
Surface modification of the simvastatin factor-loaded silk fibroin promotes the healing of rotator cuff injury through β-catenin signaling4
In vitro and in vivo study on the osseointegration of magnesium and strontium ion with two different proportions of mineralized collagen and its mechanism4
Effect of different exposure times on physicochemical, mechanical and biological properties of PGS scaffolds treated with plasma of iodine-doped polypyrrole4
PolyMet-HA nanocomplexs regulates glucose uptake by inhibiting SHIP2 activity4
Corneal sustained delivery of hyaluronic acid from nanofiber-containing ring-implanted contact lens4
Fabrication of antibacterial polydopamine-carboxymethyl cellulose-Ag nanoparticle hydrogel coating for urinary catheters4
Preparation of polyvinyl alcohol hydrogel containing chlorogenic acid microspheres and its evaluation for use in skin wound healing4
In vivo study of dual functionalized mussel-derived bioactive peptides promoting 3D-printed porous Ti6Al4V scaffolds for repair of rabbit femoral defects4
Emerging self-assembling peptide nanomaterial for anti-cancer therapy4
Investigation of an injectable gold nanoparticle extracellular matrix4
Co-Delivery of paclitaxel and doxorubicin in folate-Targeted pluronic/ploy (D,L-lactide-b-glycolide) polymersomes3
Influence of low modulus Co-Zr alloys surface modification on protein adsorption and MC3T3-E1, NIH3T3 and RAW264.7 cell behaviour3
Antibacterial effect and biological reaction of calcium phosphate cement impregnated with iodine for use in bone defects3
A biodegradable gelatin-based nanostructured sponge with space maintenance to enhance long-term osteogenesis in maxillary sinus augmentation3
The effect of alkyl chain length of (R)-3-Hydroxybutyric alkyl ester on antibacterial activity and its antibacterial mechanism3
Biomaterial mediated immunomodulation: An interplay of material environment interaction for ameliorating wound regeneration3
Effect of hydroxyapatite/alumina composite coatings using HVOF on immersion behavior of NiTi alloys3
Electrospun, synthetic bone void filler promotes human MSC function and BMP-2 mediated spinal fusion3
In vitro and in vivo evaluations of nano-hydroxyapatite/polyamide 66/yttria-stabilized zirconia as a novel bioactive material for bone screws: Biocompatibility and bioactivity3
Surface characteristics of titanium dental implants with improved microdesigns: An in vivo study of their osseointegration performance in goat mandible3
A novel strategy against hepatitis B virus: Glycyrrhetnic acid conjugated multi-component synergistic nano-drug delivery system for targeted therapy3
Grafting of maleic anhydride on poly(lactic acid)/hydroxyapatite composites augments their ability to support osteogenic differentiation of human mesenchymal stem cells3
Co-axial electrospinning of PLLA shell, collagen core nanofibers for skin tissue engineering3
The novel hybrid polycarbonate polyurethane / polyester three-layered large-diameter artificial blood vessel3
The fabrication and evaluation of silver nanoparticle-based keratin scaffolds3
The effect of zwitterionic surface content on blood circulation time of nanocapsule3
Pressure-compacted and spider silk–reinforced fibrin demonstrates sufficient biomechanical stability as cardiac patch in vitro3
Consistency evaluation of lung adenocarcinoma tissue and circulating tumor cells related gene mutation detection based on multi-site immunomagnetic beads3
Effectiveness of laddered embossed structure in a locking compression plate for biodegradable orthopaedic implants3
Titanium scaffold loaded with strontium and copper double-doped hydroxyapatite can inhibit bacterial growth and enhance osteogenesis3
In vitro and in vivo evaluation of brimonidine loaded silica nanoparticles-laden silicone contact lenses to manage glaucoma3
Preparation and in vitro characterization studies of astaxanthin-loaded nanostructured lipid carriers with antioxidant properties3
The feasibility of degradable glass microspheres as transient embolic medical devices3
Preparation and characterization of injectable gelatin/alginate/chondroitin sulfate/α-calcium sulfate hemihydrate composite paste for bone repair application3
Carbon dots with intrinsic theranostic properties for photodynamic therapy of oral squamous cell carcinoma3
Biomechanical changes of freezer-storaged and decellularized pig tracheal scaffoldings3
A hybrid cartilage extracellular matrix-based hydrogel/poly (ε-caprolactone) scaffold incorporated with Kartogenin for cartilage tissue engineering3
Enhanced osteogenic differentiation of mesenchymal stem cells by surface lithium modification in a sandblasted/acid-etched titanium implant3
The targeted inhibition of prostate cancer by iron-based nanoparticles based on bioinformatics3
Electrospun regenerated silk fibroin is a promising biomaterial for the maintenance of inner ear progenitors in vitro3
Clindamycin-loaded titanium prevents implant-related infection through blocking biofilm formation3
Preparation and characterization of Y-doped microarc oxidation coating on AZ31 magnesium alloys3
In vitro and in vivo effectiveness of a novel injectable calcitonin-loaded collagen/ceramic bone substitute3
Hydroxyapatite gradient on poly (vinyl alcohol) hydrogels surface to mimic calcified cartilage zone for cartilage repair3
Chemosensitizing micelles self-assembled from amphiphilic TPGS-indomethacin twin drug for significantly synergetic multidrug resistance reversal3
A printability study of multichannel nerve guidance conduits using projection-based three-dimensional printing3
Incorporation of cerium oxide into zirconia toughened alumina ceramic promotes osteogenic differentiation and osseointegration3
Multi-layered electrospinning and electrospraying approach: Effect of polymeric supplements on chondrocyte suspension3
Biocompatible phospholipid-based mixed micelles for posaconazole ocular delivery: Development, characterization, and in - vitro antifungal activity3
Synthesis and characterization of innovative resveratrol nanobelt-like particles and assessment of their bioactivity, antioxidative and antibacterial properties3
Design and mechanical properties of cervical fusion cage based on porous entangled metal rubber material3
0.076163053512573