Journal of Materials Research

Article	Citations
Lead-free ferroelectric materials: Prospective applications	85
A review on chemical and mechanical phenomena at the wafer interface during chemical mechanical planarization	75
Cold sintering of microwave dielectric ceramics and devices	64
Recent advances in processing of titanium alloys and titanium aluminides for space applications: A review	62
Revisiting Cu-based shape memory alloys: Recent developments and new perspectives	56
Stable core–shell ZIF-8@ZIF-67 MOFs photocatalyst for highly efficient degradation of organic pollutant and hydrogen evolution	56
Accurate measurement of thin film mechanical properties using nanoindentation	54
Ultrawide-bandgap semiconductors: An overview	43
Measurement of hardness and elastic modulus by load and depth sensing indentation: Improvements to the technique based on continuous stiffness measurement	43
High-speed nanoindentation mapping of a near-alpha titanium alloy made by additive manufacturing	40
Review on magnetocaloric high-entropy alloys: Design and analysis methods	37
Structural and optical properties of copper oxide nanoparticles: A study of variation in structure and antibiotic activity	37
A review of molecular-beam epitaxy of wide bandgap complex oxide semiconductors	36
First-principles calculations of structural, electrical, and optical properties of ultra-wide bandgap (Al$$_x$$Ga$$_{1-x}$$)$$_2$$O$$_3$$ alloys	36
Synthesis and characterization of Cr2C MXenes	35
Recent developments on fabrication of Al‐matrix composites reinforced with quasicrystals: From metastable to conventional processing	32
Analysis of the dependence of critical electric field on semiconductor bandgap	31
Nanoindentation in multi-modal map combinations: a correlative approach to local mechanical property assessment	30
Hardening effect in lead-free piezoelectric ceramics	30
Computer-aided design and additive manufacturing of bone scaffolds for tissue engineering: state of the art	29
Influence of indentation size and spacing on statistical phase analysis via high-speed nanoindentation mapping of metal alloys	29
In situ analysis of gas evolution in liquid- and solid-electrolyte-based batteries with current and next-generation cathode materials	29
Dislocation–grain boundary interactions: recent advances on the underlying mechanisms studied via nanoindentation testing	28
Probing surfaces and interfaces in complex oxide films via in situ X-ray photoelectron spectroscopy	28
Wet etch, dry etch, and MacEtch of β-Ga2O3: A review of characteristics and mechanism	28

Review on recent progress in Al–Mg–Si 6xxx conductor alloys	27
High‐energy storage performance in BaTiO3‐based lead‐free multilayer ceramic capacitors	26
Structural, elastic, optoelectronic, and transport properties of Na-based halide double perovskites Na2CuMX6 (M = Sb, Bi, and X = Cl, Br) as renewable energy materials: A DFT insight	26
Multi-stimuli-responsive magnetic hydrogel based on Tragacanth gum as a de novo nanosystem for targeted chemo/hyperthermia treatment of cancer	26
Status of the growth and fabrication of AlGaN-based UV laser diodes for near and mid-UV wavelength	25
Fabrication of circuits by multi-nozzle electrohydrodynamic inkjet printing for soft wearable electronics	25
Process and characterization of ohmic contacts for beta-phase gallium oxide	25
Mechanical phase mapping of the Taza meteorite using correlated high‐speed nanoindentation and EDX	25
A review on the recent advances concerning the fatigue performance of titanium alloys for orthopedic applications	25
Atomic and molecular layer deposition in pursuing better batteries	24
Resistance to fracture in the glassy solid electrolyte Lipon	24
A simple fabrication of superhydrophobic PVDF/SiO2 coatings and their anti-icing properties	24
Single- or double A-site cations in A3Bi2I9 bismuth perovskites: What is the suitable choice?	24
Surface passivation of germanium by atomic layer deposited Al2O3 nanolayers	24
Copper selenide as multifunctional non-enzymatic glucose and dopamine sensor	24
Powder metallurgical processing of Al matrix composite reinforced with AlSiCrMnFeNiCu high-entropy alloys: Microstructure, thermal stability, and microhardness	24
Additive manufacturing of Co–Cr alloys for biomedical applications: A concise review	23
3D printing of biomedical materials and devices	23
Two- and three-dimensional zinc oxide nanostructures and its photocatalytic dye degradation performance study	23
MOCVD growth of (010) β-(AlxGa1−x)2O3 thin films	23
An extensive review of the repair behavior of smart self-healing polymer matrix composites	22
Enhanced energy density and electric cycling reliability via MnO2 modification in sodium niobate‐based relaxor dielectric capacitors	22
Recent advances in nitrogen-doped graphene oxide nanomaterials: Synthesis and applications in energy storage, sensor electrochemical applications and water treatment	22
A review on chemical bath deposition of metal chalcogenide thin films for heterojunction solar cells	22
Computational design of 3D-printed active lattice structures for reversible shape morphing	22
Refractive index of different perovskite materials	22
Potency of a novel synthesized Ag-eugenol nanoemulsion for treating some bacterial and fungal pathogens	22
Shaping and properties of thermoplastic scaffolds in tissue regeneration: The effect of thermal history on polymer crystallization, surface characteristics and cell fate	22
Sol–gel derived hydroxyapatite coating on titanium implants: Optimization of sol–gel process and engineering the interface	21
Influence of laser surface texturing on the wettability and antibacterial properties of metallic, ceramic, and polymeric surfaces	20
A novel Iron(III)-based MOF: Synthesis, characterization, biological, and antimicrobial activity study	20
Dielectric, ferroelectric, and piezoelectric properties of Gd-modified CaBi2Nb2O9 high Curie temperature ceramics	20
Tribological and neutron radiation properties of boron nitride nanotubes reinforced titanium composites under lunar environment	20
In situ silver nanoparticle synthesis on 3D-printed polylactic acid scaffolds for biomedical applications	20
Nanomaterial-based ROS-mediated strategies for combating bacteria and biofilms	19
Diffusion-mediated chemical concentration variation and void evolution in ion-irradiated NiCoFeCr high-entropy alloy	19
Functionalized carbon nanotube for colon-targeted delivery of isolated lycopene in colorectal cancer: In vitro cytotoxicity and in vivo roentgenographic study	19
FeCoNiMnAl high-entropy alloy: Improving electromagnetic wave absorption properties	19
Boron nitride nanotubes: A review of recent progress on purification methods and techniques	18
Perspective on emerging views on microscopic origin of relaxor behavior	18
Effect of Al content on microstructure, thermal conductivity, and mechanical properties of Mg–La–Al–Mn alloys	18
Stacking fault and transformation-induced plasticity in nanocrystalline high-entropy alloys	18
The indentation size effect of single-crystalline tungsten revisited	18
Recent advances on bonding mechanism in cold spray process: A review of single-particle impact methods	18
The effect of titanium and silicon addition on phase equilibrium and mechanical properties of CoCrFeMnNi-based high entropy alloy	18
2D nanomaterials in 3D/4D-printed biomedical devices	18
Enhanced electrocaloric effect in compositional driven potassium sodium niobate‐based relaxor ferroelectrics	18
Ethylene glycol-sensing properties of hydrothermally grown feather-like ZnO nanopowder with abundant oxygen vacancies	18
Characterizing the mechanical behavior of lithium in compression	17
Effect of Mn/Fe ratio on Fe removal efficiency and tensile ductility of an Al–7.0Si–2.4Fe alloy	17

Investigating the rheology of 2D titanium carbide (MXene) dispersions for colloidal processing: Progress and challenges	17
Double Schottky metal–semiconductor–metal based GaN photodetectors with improved response using laser MBE technique	17
A review on aluminum alloy conductors influenced by alloying elements and thermomechanical treatments: Microstructure and properties	17
Engineered 2D materials for optical bioimaging and path toward therapy and tissue engineering	17
Novel superhydrophobic carbon fiber/epoxy composites with anti-icing properties	17
Recent advances and perspective on boron nitride nanotubes: From synthesis to applications	17
Mechanical anisotropy of graphene nanocomposites induced by graphene alignment during stereolithography 3D printing	16
Quantifying the effect of oxygen on micro-mechanical properties of a near-alpha titanium alloy	16
Performance up-gradation of CIGS solar cell using Ag2S quantum dot as buffer layer	16
Correlating rheology and printing performance of fiber-reinforced bioinks to assess predictive modelling for biofabrication	16
Advances in the measurement of hardness at high strain rates by nanoindentation	16
Layer-sliding-mediated reversible tuning of interfacial electronic and optical properties of intercalated ZrO2/MoS2 van der Waals heterostructure	16
3D printing nanocomposite hydrogels with lattice vascular networks using stereolithography	16
High-throughput nanoindentation mapping of cast IN718 nickel-based superalloys: influence of the Nb concentration	16
Low-cycle fatigue behavior and life prediction of fine-grained 316LN austenitic stainless steel	16
Bulk doping nickel–cobalt metal organic framework nanosheet arrays for performance-boosted hybrid supercapacitors	16
Establishing a point-of-care additive manufacturing workflow for clinical use	16
Shear delamination of multilayer MXenes	15
Applicability of focused Ion beam (FIB) milling with gallium, neon, and xenon to the fracture toughness characterization of gold thin films	15
Growth of nanoporous high-entropy oxide thin films by pulsed laser deposition	15
Biocompatibility and corrosion resistance of low-cost Ti–14Mn–Zr alloys	15
Fabrication and applications of fullerene-based metal nanocomposites: A review	15
Inversion-type p-channel diamond MOSFET issues	15
Nanoindentation creep testing: Advantages and limitations of the constant contact pressure method	15
Thermal drift in room temperature nanoindentation experiments: Measurement and correction	15
In situ fracture observations of distinct interface types within a fully lamellar intermetallic TiAl alloy	15
Greener microwave synthesized Se nanospheres for antioxidant, cell viability, and antibacterial effect	15
Electrodeposition of bactericidal and bioactive nano-hydroxyapatite onto electrospun piezoelectric polyvinylidene fluoride scaffolds	15
Enhanced photoluminescence, optical, structural properties of ZrO2-incorporated Sm2O3:Co3O4 nanocomposite and their applications in photocatalytic degradation of methylene blue	15
A review on the polymers with shape memory assisted self-healing properties for triboelectric nanogenerators	15
Gallium oxide-based optical nonlinear effects and photonics devices	15
Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline AlxCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys	14
Facet of 4D printing in biomedicine	14
Influence of ionic liquid (IL) treatment conditions in the regeneration of cellulose with different crystallinity	14
A low-cost printed humidity sensor on cellulose substrate by EHD printing	14
Additive manufacturing of textured ceramics: A review	14
Design and manufacturing of biomimetic porous metal implants	14
Synthesis and characterization of a novel CoCrFeMnNi high-entropy alloy-reinforced AA6082 composite	14
Development of high-strength WNbMoTaVZrx refractory high entropy alloys	14
Nanocrystal composites cement/BaCO3/Fe2O3 for improved X-ray shielding characteristics: Stability structural properties	14
Solid solution hardening in CrMnFeCoNi-based high entropy alloy systems studied by a combinatorial approach	14
Facile formation with HA/Sr–GO-based composite coatings via green hydrothermal treatment on β-type TiNbTaZr alloys: Morphological and electrochemical insights	14
3D-printed solid-state electrolytes for electrochemical energy storage devices	14
Overview: Current trends in green electrochemical energy conversion and storage	14
Recent developments in transition metal-based nanomaterials for supercapacitor applications	14
High strain rate in situ micropillar compression of a Zr-based metallic glass	14
Silver stoichiometry engineering: an alternative way to improve energy storage density of AgNbO3-based antiferroelectric ceramics	13
Computational synthesis of 2D materials grown by chemical vapor deposition	13
Photo-crosslinked gelatin methacrylate hydrogels with mesenchymal stem cell and endothelial cell spheroids as soft tissue substitutes	13
The fracture toughness of martensite islands in dual-phase DP800 steel	13
Organic crystal structure prediction and its application to materials design	13
Substrate-dependent differences in ferroelectric behavior and phase diagram of Si-doped hafnium oxide	13
An insight into the electrochemical performance of cobalt-doped ZnO quantum dot for supercapacitor applications	13
Investigation on bioactivity, mechanical stability, bactericidal activity and in-vitro biocompatibility of magnesium silicates for bone tissue engineering applications	13
Hot deformation and softening response in boronmodified two‐phase titanium aluminide Ti–48Al–2V–0.2B	13
Novel p-type oxides with corundum structure for gallium oxide electronics	13
Impacts of chain extenders on thermal property, degradation, and rheological performance of poly(butylene adipate-co-terephthalate)	13
Strain states and relaxation for $$\alpha$$-(Al$$_x$$Ga$$_{1-x}$$)$$_2$$O$$_3$$ thin films on prismatic planes of $$\alpha$$-Al$$_2$$O$$_3$$ in the full composition range: Fundamental difference of a-	13
Microstructural evolution, precipitation behavior and mechanical properties of a novel Al–Zn–Mg–Cu–Li–Sc–Zr alloy	13
Crystal structure optimization, ultrasonic properties and morphology of Mg/Se co-dopant into annealed hydroxyapatite for biomedical applications	13
Boosting the visible-light activity of ZrO2/g-C3N4 by controlling the crystal structure of ZrO2	13
Computational modeling and simulation of bioinspired nacre-like composites	13
Thermally stable dielectric properties of 0.5Na0.5Bi0.5TiO3–0.4SrTiO3–0.1BiFeO3 ceramics at high temperature	13
Multiscale modeling of interface-mediated mechanical, thermal, and mass transport in heterogeneous materials: Perspectives and applications	13
Current sensing supercapacitor electrodes based on chitosan/poly-o-toluidine hydrogel composites	13
Perspectives on multi-material additive manufacturing	13
Predicting mechanical fields near cracks using a progressive transformer diffusion model and exploration of generalization capacity	13
Effect of pH on the growth and ibuprofen photocatalytic response of Zn1 − xCoxO compound synthesized by the co-precipitation method	13
Biodegradable polyphosphazenes for regenerative engineering	13
What happens when transition metal trichalcogenides are interfaced with gold?	13
Enhanced room-temperature ammonia vapor-sensing activity of nebulizer spray pyrolysis fabricated SnO2 thin films: an effect of Er doping	13
Effect of alloying elements on thermal conductivity of aluminum	13
Efficient hydrogen generation from the NaBH4 hydrolysis by amorphous Co–Mo–B alloy supported on reduced graphene oxide	12
Salt-rejecting rGO-coated melamine foams for high-efficiency solar desalination	12
Fabrication of magnesium phosphate bone cement with enhanced osteogenic properties by employing zeolitic imidazolate framework-8	12
3D-printed interdigital electrodes for electrochemical energy storage devices	12
A modified Sneddon model for the contact between conical indenters and spherical samples	12
Enhanced photocatalytic degradation of cationic and anionic dyes by Ag-modified g-C3N4 composite: Insights on different mechanisms under visible light	12
Sensitivity estimation for calculated phase equilibria	12
3D printed poly(hydroxybutyrate-co-hydroxyvalerate)—45S5 bioactive glass composite resorbable scaffolds suitable for bone regeneration	12

Effects of gold nanoparticles (Au-NPs) on the electrical properties of reduced graphene oxide: An experimental and DFT study	12
Effect of different contents of WC on microstructure and properties of CrMnFeCoNi high-entropy alloy-deposited layers prepared by PTA	12
Dissimilar welding of high-entropy alloy to Inconel 718 superalloy for structural applications	12
Enhanced visible-light catalytic degradation of methylene blue by improving adsorption of porous zirconium-based porphyrin MOFs sensitized TiO2 photocatalyst	12
Dispersion and individualization of boron nitride nanotubes	12
Effects of Eu3+, Gd3+ and Yb3+ substitution on the structural, photoluminescence, and decay properties of silicate-based bioactive glass powders	12
Development, structural and rheological characterization, and in vitro evaluation of the zinc-doped 45S5 bioactive glass-vaseline ointment for potential wound healing applications	12
Fluoride-free synthesis and long-term stabilization of MXenes	12
Insights of 3D bioprinting and focusing the paradigm shift towards 4D printing for biomedical applications	12
Influence of tin doping on the liquefied petroleum gas and humidity sensing properties of NiO nanoparticles	12
Direct determination of the area function for nanoindentation experiments	12
The optimization of the groove depth height in friction stir welding of AA 6061-T6 with Al2O3 powder particle reinforcement	12
High-Temperature Scanning Indentation: A new method to investigate in situ metallurgical evolution along temperature ramps	12
Collagen-derived peptide, DGEA, inhibits pro-inflammatory macrophages in biofunctional hydrogels	12
Controlling shear band instability by nanoscale heterogeneities in metallic nanoglasses	12
Bi(Mg0.5Hf0.5)O3-modified SrTiO3 lead-free ceramics for high-temperature energy storage capacitors	12
Synthesis, characterization, and application of functionalized pillar[5]arene silica gel (Si-APTMS-pillar[5]arene) adsorbent for selectivity and effective removal of Cu(II) ion	12
Progress and perspectives of space charge limited current models in all-solid-state batteries	12
Synthesis, characterization, elastic, and electro-magnetic properties of MFe2O4 ferrites (M = Co2+, Ni2+, Cu2+, Mg2+, and Zn2+) via sucrose auto-combustion	12
A review of coated nano- and micro-lattice materials	12
⍺-NSA doped PPy @ Ti3C2Tx hybrid material as a high-performance supercapacitor electrode	12
Stiff and strong, lightweight bi-material sandwich plate-lattices with enhanced energy absorption	11
Magnetostrictive loss reduction through stress relief annealing in an FeNi-based metal amorphous nanocomposite	11
Enhanced effect of adsorption and photocatalytics by TiO2 nanoparticles embedded porous PVDF nanofiber scaffolds	11
Structural, electronic, magnetic, optical and thermoelectric properties of Co2Fe1−xTixAl alloys: GGA and GGA+U approaches	11
Hetero-architectured core–shell NiMoO4@Ni9S8/MoS2 nanorods enabling high-performance supercapacitors	11
Microstructure and hydrogen storage properties of Ti–V–Mn alloy with Zr, Ni, and Zr7Ni10 addition	11
In situ hydrothermal synthesis of TiO2–RGO nanocomposites for 4-nitrophenol degradation under sunlight irradiation	11
Bioactive and antibacterial metal implant composite coating based on Ce-doped nanobioactive glass and chitosan by electrophoretic deposition method	11
Photocatalytic degradation of propranolol hydrochloride using Nd–TiO2 nanoparticles under UV and visible light	11
High strain rate compression behaviour of 3D printed Carbon-PA	11
Fabricating hollow, multishell CeO2 microspheres for enhanced photocatalytic degradation of RhB under visible light	11
NiSe2/Mn0.3Cd0.7S Schottky junction catalyst for enhanced photocatalytic hydrogen production under visible light	11
In situ graphitized hard carbon xerogel: A promising high-performance anode material for Li-ion batteries	11
Easy way to produce iron-doped titania nanoparticles via the solid-state method and investigation their photocatalytic activity	11
Plasma-Sprayed HA/Sr Reinforced Coating for Improved Corrosion Resistance and Surface Properties of Ti13Nb13Zr Titanium Alloy for Biomedical Implants	11
Cobalt hydroxide nanoflakes intercalated into nitrogen-doped reduced graphene oxide’s nanosheets for supercapattery application	11
Characterization and electrochromic properties of NiO thin films prepared using a green aqueous solution by pulsed spray pyrolysis technique	11
Unraveling synergistic mixing of SnO2–TiO2 composite as anode for Li-ion battery and their electrochemical properties	11
Graphene oxide membranes for effective removal of humic acid	11
The effect of silk–gelatin bioink and TGF-β3 on mesenchymal stromal cells in 3D bioprinted chondrogenic constructs: A proteomic study	11
Electromagnetic shielding performance of reduced graphene oxide reinforced iron oxide nanostructured materials prepared by polyol method	11
Thermally activated dislocation mechanism in Mo studied by indentation, compression and impact testing	11
Understanding toxicity associated with boron nitride nanotubes: Review of toxicity studies, exposure assessment at manufacturing facilities, and read-across	11
Zinc curcumin complex on fluoride doped hydroxyapatite with enhanced biological properties for dental and orthopedic applications	11
Recent progress in 3D-printed polyaryletherketone (PAEK)-based high-performance polymeric implants for musculoskeletal reconstructions	11
Hybrid additive manufacturing of biocompatible Ti–Ta composite structures for biomedical applications	11
Critical overview of polyanionic frameworks as positive electrodes for Na-ion batteries	10
Experimental Hall electron mobility of bulk single crystals of transparent semiconducting oxides	10
A unified approach to quantify the material and geometrical effects in indentation size effect	10
Investigation of the recovery behavior of irradiation defects induced by a neutron in 4H-SiC combining Raman scattering and lattice parameters	10
First-principles calculations of diffusion activation energies for designing anti-self-aging biodegradable zinc alloys	10
Advances on graphene-based gas sensors for acetone detection based on its physical and chemical attributes	10
Growth evolution of high-quality MOCVD aluminum nitride using nitrogen as carrier gas on the sapphire substrate	10
A simplistic approach to evaluate the power conversion efficiencies for hybrid charge transport layers in open-air fabricated perovskite solar cells	10
Phonon engineering of boron nitride via isotopic enrichment	10
Synthesis of vertically aligned boron nitride nanotubes with a template of single-walled carbon nanotubes	10
The adsorption of halogen molecules on Ti (110) surface	10
N/P co-doped porous carbon microspheres for supercapacitor with long-term electrochemical stability	10
Silk fibroin nanoparticles as a versatile oral delivery system for drugs of different biopharmaceutics classification system (BCS) classes: A comprehensive comparison	10
Porous SnO2 nanospheres coated with reduced graphene oxide for formaldehyde gas sensor: Synthesis, performance and mechanism	10
Directed energy deposition joining of Inconel 625 to 304 stainless steel with direct bonding	10
Structural, optical, magnetic and electrochemical properties of hydrothermally synthesized WS2 nanoflakes	10
Negative capacitance and hysteresis in encapsulated MAPbI3 and lead–tin (Pb–Sn) perovskite solar cells	10
Nanomechanical mapping and strain rate sensitivity of microcrystalline cellulose	10
Electrochemical biosensor utilizing dual-mode output for detection of lung cancer biomarker based on reduced graphene oxide-modified reduced-molybdenum disulfide multi-layered nanosheets	10
Fabrication and strengthening mechanisms of magnesium matrix composites with bimodal microstructure induced by graphene nanoplatelets	10
Mn-doped NiP: Facile synthesis and enhanced electrocatalytic activity for hydrogen evolution	10
Time‐resolved in situ electrochemical atomic force microscopy imaging of the corrosion dynamics of AA2024‐T3 using a new design of cell	10
Microstructure and electrical properties of CuO-doped K0.5Na0.5NbO3-based single crystals with low dielectric loss	10
Prospective applications of transition metal-based nanomaterials	10
Nanostructured Ti–13Nb–13Zr for dental implant applications produced by severe plastic deformation	10
A poroelastic master curve for time‐dependent and multiscale mechanics of hydrogels	10
Drug eluting titanium implants for localised drug delivery	10
Microstructure and mechanical properties of MoNbTaW refractory high-entropy alloy prepared by spark plasma sintering	10
Scaling laws for nanoporous metals under uniaxial loading	10
Impact of brilliant green dye on structural, linear, and third-order nonlinear optical properties of poly(vinyl alcohol) polymer composites for optoelectronic applications	9
Recent advances in water-induced electricity generation based on 2D materials: A review	9
Degradable magnesium implants: improving bioactive and antibacterial performance by designed hybrid coatings	9
Flexible iron oxide supercapacitor electrodes by photonic processing	9
Nanomechanical testing of freestanding polymer films: in situ tensile testing and Tg measurement	9
Microstructural characterization and mechanical properties of SLM-printed Ti–6Al–4V alloy: Effect of build orientation	9
Performance analysis of IPMC electrode based on the densest packing principle	9
Strain-induced structural, elastic, and electronic properties of 1L-MoS2	9
Implications of doping on microstructure, processing, and thermoelectric performance: The case of PbSe	9
Low‐temperature failure mechanism of [001] niobium micropillars under uniaxial tension	9
Three different mathematical models to predict the hot deformation behavior of TA32 titanium alloy	9
Recent advances in graphene-based micro-supercapacitors: Processes and applications	9
Understanding electro-mechanical-thermal coupling in solid-state lithium metal batteries via phase-field modeling	9
Hybrid nanostructured PAN@NiCu(CO3)(OH)2 composite for flexible high-performance supercapacitors	9
Role of equilibrium and non-equilibrium grain boundary stress fields on dislocation transmission	9
Effect of interface structure on dislocation glide behavior in nanolaminates	9
Hydroxyapatite nanoparticle-enriched thiolated polymer-based biocompatible scaffold can improve skin tissue regeneration	9
Investigation the effect of different surface ligand treatments on luminescence and performance of quantum dot LEDs	9
Integrating atomistic simulations and machine learning to design multi-principal element alloys with superior elastic modulus	9