Journal of Tribology-Transactions of the Asme

Article	Citations
Modeling of Traction Drive in Elastohydrodynamic Lubrication Contact and Traction Coefficient Enhancement Using Surface Texture Under High-Speed Conditions of up to 50,000 rpm	76
Reviewer’s Recognition	36
Point Contact Elastohydrodynamic Lubrication and Wear in Intermittent Motion	32
Influence of Physical Electrodeposition Attributes on Mechano-Tribo and Wettability Characteristics of Ni-Co Enhanced Nanocoating	30
Development of Bio-Metallic Implants Coated with Biopolymer for Composite Coating	28
Dynamic Characteristic Analysis of Mechanical Seals With Leakage Rate as Response	26
Study on the Surface Texture-Microparticles Synergistic Lubrication Mechanism of Artificial Joint	25
Investigations on Ways to Improve the Scuffing and Wear Behavior of Oil-Free Water-Based Lubricants for Gear Applications	24
Numerical and Experimental Investigations on the Lubrication Regime Transition Characteristics of Journal Bearings Used in Wind Turbine Gearboxes	23
Tribological Behavior of Direct Metal Laser Sintering–Manufactured Ti6Al4V Alloy in Different Biofluids for Orthopedic Implants	22
Novel Sustainable Grease Developed From Waste Cooking Mustard Oil and Garlic Oil: A Study of Rheological and Extreme Pressure Properties	22
Sliding Wear Behavior and Surface Integrity of Optimized Tungsten Inert Gas Welded AlCrCuNiFe High Entropy Alloy Claddings for Engineering Application Under Abrasive Conditions	20
Numerical Calculation of Fluid Film Force on Journal Bearings Based on a Biconjugate Gradient-Stabilized Algorithm	20
Synergistic Lubrication for Textured Surfaces Using Polar and Nonpolar Lubricants	20
Efficiency Prediction Model for Planetary Roller Screw Mechanism Considering Machining Errors	20
Multiplanar Creep Characterizations of the Functional Spinal Units of the Subaxial Cervical Spine	20
Experimental Investigation of Electrical Contact Failure Mechanisms of Spring Blade Components Under Lateral Fretting at Power Current Levels	19
Research on Friction and Wear Behaviors of Different Solid Lubricant Coatings on Aluminum-Based Piston Skirts	19
Characterization of Magnetorheological Brake in Shear Mode Using High-Strength MWCNTs and Fumed Silica-Based Magnetorheological Fluids at Low Magnetic Fields	19
Integrating Friction Noise for In Situ Monitoring of Polymer Wear Performance: A Machine Learning Approach in Tribology	18
Local Calculation of Load-Dependent Gear Power Losses of Cylindrical Gears	17
Influence of Shaft Scratch on Static and Transient Behavior of Water-Lubricated Bearing	17
A Simplified Thermal Plasto-Elastohydrodynamic Lubrication Model for Circular Contact With Real Surface Roughness	17
Performance Evaluation of Multi-Additive TMPTO Bio-Lubricant: Friction, Wear, and Diesel Engine Efficiency	17
Recent Progress on the Tribological Applications of Solid Lubricants	17

In Memoriam: Tribute to President Michael R. Lovell	16
Study of Magnetorheological Grease Flow in a Double Restriction Seal Configuration	16
A Semi-Physical Model for the Dissipative Mechanisms Present in the Rail Grinding Process	16
Prediction of Friction Factors and Leakage for Hole Pattern Seals Using Computational Fluid Dynamics and Artificial Neural Network	16
Developing a Simplified Linear-Elastic Material Model for Carbon Paper Applied in the Rough Rail–Wheel Contact	15
Transient Performance Study of Compliant Foil Cylindrical Gas Film Seal With Supercritical Carbon Dioxide	15
Static Friction Coefficient Depends on Geometry	15
VTMOEO-Intercalated Magnesium Silicate Hydroxide: Enhanced Tribological Properties via Adsorption Film Formation	14
Study on the Mechanism of Electrochemical Mechanical Polishing Mechanism of Single-Crystal 4H-SiC Based on Friction and Wear	14
Simplified Formulation for Bush, Gibson, and Thomas Model	14
Tribological Behaviors and Meshing Efficiency of a Novel Planar Ball Reducer Based on the Elastohydrodynamic Lubrication Theory	14
Study of the Running-In Period in the Twin-Disc Wear Test Using Steel From a Class C Forged Railway Wheel	14
Assessment of Tool Condition and Surface Quality Using Hybrid Deep Neural Network: CNN-LSTM-Based Segmentation and Statistical Analysis	14
Contact Unloading Behaviors of Elastic-Power-Law Strain Hardening Material Considering Indenter Elasticity Effect	14
Wear Characteristics of Dissimilar SDSS 2507–IN 718 Parts Fabricated by Cold Metal Transfer-Based Wire Arc Additive Manufacturing	13
Dynamic Force and Moment Characteristics of Annular Gaps—Simulation Results and Evaluation of the Relevance of the Tilt and Moment Coefficients	13
“Decoupling Hardness from Erosion Resistance in High-Entropy Alloys”	13
Special Issue: Orthopedics and Biotribology	13
Evolution of Lubrication Characteristics of Double-Nut Ball Screws Based on an Efficient Surface Roughness Modeling Method	13
Investigation on the Tribological Behavior of Aluminum Matrix Composite Reinforced With Particulate Titanium Aluminide	13
An Energy-Based Parameter for Solid Particle Erosion Assessment	13
Lubrication With a Boger Fluid: Decoupling Viscosity and Elasticity in Friction and Wear Control	13
Optimized Design and Biomechanical Analysis of Novel Hollow-Porous Hip Prosthesis for Enhancing Bone–Implant Interactions	13
Simulating the Transient Dynamics of Line-Contact Elasto-Hydrodynamic Lubricated Systems by Solving a Differential Algebraic Equation Set	13
Performance of Thermally Sprayed Nickel and Tungsten-Based Coatings in Slurry Erosion Conditions: A Review	12
Probing the Synergy of Calcium Sulfonate Complex Soap and Polyurea Complex Thickener Toward Good Lubrication and Rheological Properties	12
Comparative Study of the Abrasive Wear Resistance of Hardfacing FeCrC, FeCrC + Nb, FeTiCW, and FeMn Coating	12
Slip Characteristics in Cylindrical Roller Bearings—Part III: Influence of Bearing Clearance on the Roller and Set Slip	12
Friction and Wear Behaviors of HT200 Sliding Against QT600 Under Flame Ablation Environment	12
Factor Analysis-Based Selection of Xanthoceras sorbifolia Bunge Oil as a Promising Bio-Based Lubricant	12
Theoretical Development in the Viscosity of Ferrofluid	12
Investigating the Wear Mechanism of TiAlN/TiN PVD-Coated WC Inserts in End Milling of Incoloy 925 Under Synergy of Bio-Degradable Fatty Acids and Nano-Metallic Solid Lubricant	12
Influence of Nano-Magnesium Silicate Hydroxide on Tribological Properties of Electroless Ni–P Coating	12
Friction and Wear Performance of Ionic Liquid-Functionalized MoS2 Nanosheets as Lubricant Additives	12
Hydrodynamic Thrust Bearing Test Rig With Novel Bearing Alignment System	12
Multiscale Simulation and Analysis of Contact Temperature in Line Contacts Under Boundary Lubrication	11
On the Thermal Degradation of Lubricant Grease: Experiments	11
Tribological Behavior and Mechanism of Surface-Modified Mullite as Polyurea Grease Additive	11
Optimizing Graphene-Enhanced Poly-Alpha-Olefin Oils: The Role of Additive Geometry and Concentration in Lubricity Performance Across Simulation Conditions	11
A Novel Model Based on Asperities Contact for the Assessment of Tribocorrosive Wear in Marine Applications	11
Knowledge-Guided Convolutional Neural Network Model for Similar Three-Dimensional Wear Debris Identification With Small Number of Samples	11
A Multi-Point Coupling Strategy for the Analysis of Spatially Distributed Rotor–Clearance Flow Interaction	11
On the Lubrication and Stability Behaviors of a Conical Hybrid Floating Ring Bearing With Thermal Effects	11
Dynamic Contact Stress Determination Method for the Normal Collision Between Rigid Sphere and Elastic Half-Space Interface	11
Analytical Modeling and Experimental Validation of Wear and Frictional Noise Under Lubricated Conditions	11
Optimization Design of Oil Groove Shape on the Surface of Friction Plate in High-Speed Wet Clutch Aimed at Minimizing Drag Torque	11
Comparative Study of Tribological Performance of LPBF-Produced AlSi10Mg and Wrought Al6061T6 Alloys	11
Improving Surface Finish of Laser Additively Manufactured Curvilinear Surfaces Via Electropolishing and Electroless Coating	10
Impact of Angular Misalignment on the Wear and Thermal Behavior of Polymer Gears: Experimental and Analytical Insights	10
Design and Development of a Ball on Three-Plates Tribometer Under Controlled Magnetic Field and Impact of Magnetohydrodynamic Lubrication on Elastohydrodynamic Point Contact	10

Experimental, Analytical, and Numerical Analyses of Slurry Erosion Resistance of Austenitic 1.4301 Stainless Steel	10
Developing Linear-Elastic Material Models for Pressure Measurement Films in Steel–Steel and Wheel–Rail Contact	10
Computational Fluid Dynamics Analysis of the Influence of Gas Content on the Rotordynamic Force Coefficients for a Circumferentially Grooved Annular Seal for Multiple Phase Pumps	10
The Tribocorrosion Resistance of Posttreated Supersonic Plasma-Sprayed MoSi2 Coating	10
Validation of Gear Friction Equation Using Directional Parameter	10
A Neural Network Solution for Comprehensive Contact Analysis in Hard-On-Hard Hip Implants	9
Tribological Behavior of Annealed FeCoNiMn0.25Al0.25 High-Entropy Alloy	9
Comparative Study on Galling and Antiwear Behavior of Polyurethane Based Coatings Reinforced With Pristine and Alkylated MoS2 Nanosheets	9
Investigation on the Effect of Cow Dung Ash/SiC Reinforcement and T6 Heat Treatment on the Microstructure, Mechanical, and Tribological Behaviors of Al7075 Matrix Composites	9
Manufacturing of Hybrid Surface Composites Cu/(B4C + MoS2) Via Friction Stir Processing	9
Microstructure and Texture-Driven Enhancement of Surface Properties in Water-Cooled Friction Stir Processed AA6061 Alloy	9
Rough Surface Electroadhesion Model for Meniscus-Driven Haptic Interfaces	9
Enhanced Tribological Performance and Self-Locking Torque Stability in Ultrasonic Motors Via PEEK/PTFE–AlCrN Dual Coatings	9
Dynamic Behavior of a Tilting-Pad Thrust Bearing Operating Under a Hybrid Lubrication Regime	9
Recent Advancements in Machining Processes Using Minimum Quantity Lubrication and Nanofluids	9
Eulerian–Lagrangian Investigation of Erosion Wear Within a Water-Submerged Jet: Two-Way Coupling	9
Enhancing Lubrication of Electrified Interfaces by Inert Gas Atmosphere	9
Development of a WS2-Based Solid Lubricant Wear-Resistant Coating on Stainless Steel by Laser-Assisted Cold Spray Process	9
Influence of Fiber Direction on the Tribological Behavior of Carbon-Reinforced PEEK at Elevated Temperature for Application in Gas Turbine Engines	9
Quantification of the Real Contact Area of a Finger-Pad During Sliding Using a Novel Optical Coherence Tomography System and the Influence of Skin Thickness	9
On the Thermal Degradation of Lubricant Grease: Degradation Analysis	9
Thermoelastohydrodynamic Mixed Lubrication of Combined Rod Seals Operating at High Pressures and Speeds: Mathematical Modeling and Numerical Analysis	8
Influence of Heat Treatment on Fretting Wear Behavior of Laser Powder Bed Fusion Inconel 718 Alloy	8
Optimization and Tribological Performance of Laser-Textured Ti-3Al-2.5V and Ti-6Al-7Nb Alloys for Advanced Engineering Applications	8
Friction and Wear Behavior of Cu–Mo Coatings Paired With 7075Al Alloy Under Current-Carrying Environment	8
A Procedure to Isolate the Electrical Capacitance of Tooth Contacts From Charging Curve Measurements of a Gear Stage	8
Discussion of “Influence of Material and Lubricant Parameters on the Performance of Elastohydrodynamic Lubrication Under Oscillatory Motion” (Abd Al-Samieh, M. F., and Shaheen, M., 2026, ASME J. Tribo	8
Experiment and Simulation on the Ferrofluid Boundary Deformation and Fluctuation Characters of a High-Speed Rotary Seal	8
An Analysis of the Load Distribution Characteristics of a Cylindrical Roller Bearing Including the Component Deformation and Waviness	8
The Difficulty of Measuring Surface Topography in Additive Manufacturing: A Comparison Between Measured and True Surface Features of Binder-Jet Printed Samples	8
A Mesoscopic Friction and Wear Model of Elastoplastic Metallic Materials Considering the Three-Dimensional Rough Surface	8
Deconstructing Triboinformatics: A Conceptual Framework for the Intersection of Machine Learning and Tribology	8
Laser Com-Texture on Ti6Al4V Surface for Lubricant Transportation to Improve Tribological Properties	8
A Novel Method for Estimating Friction Boundary Conditions and Elastic Parameters of Soft Tissue Materials	8
Effect of Pulse Current on Friction Coefficient of 7075-T6 Aluminum Alloy and Microstructure Analysis	8
Finite Element Analysis on Thermoelastic Instability of Multidisc Clutches Involving Deformation Modes of Multilayer Material Friction Disc	8
Investigations on the Load Capacity of Multilayer Foil Thrust Bearing Based on an Updated Complete Model	8
Machine Learning-Based Approach for Fast Prediction of Transient Tribo-Dynamic Behaviors in Lubricated Systems	8
Investigating the Lubrication Properties of PAO-4 Oil With Hybrid Graphene Oxide/Fe2O3 Nanocomposite Additives	8
Investigation of Low-Temperature Tribological Behavior of Multilayer a-C:H Coatings Deposited on 5A06 Aluminum Alloy	8
Failure Prevention Procedure of the Very Large Telescope Hydrostatic Bearing Pads Based on the Lubricating Film Thickness Measurement	8
Improved Analytical Model for Mesh Stiffness of Helical Gears Considering the Relationship of Friction and Flash Temperature Under Steady Temperature Field	7
Experiments and Lattice-Boltzmann Simulation of Flow in a Vertically Aligned Gearbox	7
Investigation of Wear Property and Strengthening Mechanism of Hot-Rolled Medium Manganese Steel on Condition of Slurry Erosion Wear	7
Coconut Oil–Based Green Cutting Fluid for Sustainability of Machining Operations: Studies on Different Surface Roughnesses	7
Investigations of the Bump Foil Bearing With Thick Top Foil Based on Contact Mechanics	7
High-Temperature Tribological Properties of Cu–Ni–Sn/WC Composite Coatings Produced by Laser Cladding	7
Contact Mechanics and the Human Body: Current Applications, Emerging Opportunities, and Market Potential Across Clinical Domains	7
A Comprehensive Instantaneous Power Loss Calculation Method of Planetary Gear System Considering Tooth Surface Microtopography	7
Effects of Eccentric Errors on Sliding Velocity and Accumulative Wear Depth of Planetary Roller Screw Mechanism	7
A Critical and Comparative Study of Layered Cylindrical Hollow Roller Bearing Using Numerical and Experimental Analyses for the Assessment of Static Load Carrying Capacity	7
Polymer Lubrication: Pressure–Viscosity–Temperature Dependence of Film Thickness for Highly Loaded Compliant Contacts in Elastohydrodynamic Lubrication Regime	7
Oil Film Formation and Delamination Process on Nanostructured Surfaces in Boundary Lubrication: A Coarse-Grained Molecular Dynamics Study	7
Analysis of Air Foil Thrust Bearings Under Misalignment Conditions Featuring Performance Limit Curves	7
Propagation of Uncertainty in Experimental Dynamic Coefficients of Fluid Film Journal Bearings	7
Neural Network Prediction of Reciprocating Friction for X-Type Seals	7
Dry Sliding Wear Behavior of AZ31-ZrO2 Nanocomposites	7
Vibration Dynamic Analysis of the Bearing Parameters in Steam Turbine Bearing Systems in Sugar Refinery	7
Measuring the Roller Skew Angle in the Loading Zone of a Cylindrical Roller Bearing With Strain Gauges for Long-Term Monitoring	7
Influence of Vibratory Excitation on Friction During Sintering of Metal Binder Jetting Components	7
Experimental Investigation of Microdimples for Improving Lubrication and Friction in Piston-Liner Contacts of Internal Combustion Engines	7
Tribological Performance of Magnetorheological Fluid in Compliant Contact	7
Influence of Free Water Droplets on Film Formation Under Point Contact Grease Lubrication	7
Impact of Oil Supply Conditions on Water Lubrication Assisted With Minimal Secondary Lubricating Medium	7
On the Effect of Grading Elastic Modulus in Frictional Line Contacts	6
Optimization of Oil Bores on Connecting Rod Small End to Prevent Bushing Failures at Maximum Speed	6
Leakage Control Mechanisms and Strategies for Hydraulically Driven Controllable Rod Seals	6
Kinematic-Geometric Lubrication Theory and Its Application to Arc-Toothed Cylindrical Worm Drive	6
Modeling of Flash Temperature for Elastic Sliding Contact of Single Micro-Asperity Pair	6
Knudsen Maximum Effect in Micro-Scale Gas Lubrication	6
The Influence of Cage Pocket Lubrication on the Simulation of Deep Groove Ball Bearing Cage Motion	6
Axial Static Stiffness of Ball Screw Feed Drive System Incorporating Flexibility of Ball Screw and Rolling Bearing	6
Tribute to Ward O. Winer	6
Influence of Cryogenic Treatment and Tempering Temperature on Microstructural Evolution and Dry Sliding Wear Behavior of AISI D3 Cold-Work Tool Steel	6
An Investigation Into the Thermal Behavior of Planetary Gear Systems Under Mixed Lubrication	6
A Comprehensive Review of Journal Bearing Models: Comparative Analysis of Thermal, Elastic, and Hydrodynamic Approaches Considering Misalignment, Surface Texture, Turbulence, and Cavitation	6
Uncertainty Analysis of Friction and Wear-Rate of Cylinder Liner–Piston Ring Tribo Pair Under Boundary Lubrication Conditions	6
Prediction of Frictional Moment of Cylindrical Roller Bearing Using Experimental Data-Driven Artificial Neural Networks	6
Modeling of Aerodynamic Leidenfrost Effect of Oil Droplets	6
Numerical and Experimental Studies of Cavitation Damage Characteristics of 17-4PH Stainless Steel Under Array Groove Structure	6

Static Characteristics of High-Speed Water-Lubricated Journal Bearing Considering Turbulence and Cavitation Effects	6
Full-Size Experimental Investigations on Planetary Gear Journal Bearings in High-Power Wind Turbines	6
Using Fluid Curtains to Improve Sealing Performance in Turbomachinery Applications	6
Study on Tribological Performance of Enhancing Water Lubrication by Environmentally Friendly Lubricating Oil	6
A Theoretical and Experimental Study on the Power Loss of Gearbox Based on Dimensionless Analysis	6
Numerical Investigation of Deep Surface Texture Performance Using a Finite Element Solution of the 2D Navier–Stokes Equations	6
Coupled Effect of Lubricant Fill Volume on Drag and Friction Torque of Dip-Lubricated Wet Clutches	6
Positron Annihilation and EBSD Studies of Subsurface Zone Created During Friction in Vanadium	6
Formulation of In Situ Synthesized TiO2–Jatropha Oil Bio-Nanolubricants—A Green Alternative for Petroleum-Based Lubricant	6
Thermomechanical Analysis and Lubrication Failure Mechanisms in High-Power Diesel Engine Main Bearings	6
Tribological Behavior of Mg/Fe3O4 Recycled Nanocomposites Processed Through Turning Induced Deformation Technique	6
A Simplified Model for Numerical Investigation of Bump-Type Foil Bearings Based on Contact Nonlinearity	6
An Analytical Adhesion Model for Elastic Contact Electrification	6
Influence of Acetabular Cup Elevation Height on Contact and Failure Analysis of Metal-on-Metal Hip Prosthesis Under Mild and Severe Microseparations for Regular and Risky Gait Loads	6
Effect of TiO2–SiC and Heat Treatment on Tribological Characteristics of Bimodal Hybrid Aluminum Composites Under Dry Sliding Condition	5
A Review on Wear Behavior of High Entropy Alloys: Influence of Composition, Temperature, and Processing Technique	5
Static Force Characteristic of Annular Gaps – Experimental and Simulation Results	5
Tribological Performance of Carbon Nanospheres as Lubricant Additives: Insights From Molecular Dynamics Simulation and Experimental Analysis	5
Pitting Life Optimization for Helical Gears Based on Interfacial Lubrication and Machine Learning	5
Effect of Normalizing Treatment on Wear Characteristics of U75V Flash-Butt-Welded Joints in Coastal Environment	5
A Novel Method for Load Estimation of a Finite-Length Journal Bearing Lubricated by a Power Law Fluid	5
Analysis of Lubrication and Wear Model With Grease for the Harmonic Reducer	5
Tribological Properties of Cu–25Zn–5Al–3Fe–3Mn Alloy at High Temperatures	5
Friction Performance of Nano-copper as a Rapeseed Oil Additive Under Electromagnetic Field	5
Microstructure, Hardness, and Corrosion-Wear Behavior of Nitrided Al x CoCrFeNi High-Entropy Alloy Coatings Deposited by Cold Spraying	5
Experimental Investigation on Roller Skewing and Tilting at the Loaded Positions of Double-Row Tapered Roller Bearings Under Eccentric Loading	5
Predictive Modeling of Real Contact Area on Rough Surfaces Using Deep Artificial Neural Network	5
Static Characteristics of Hybrid Water-Lubricated Herringbone Groove Journal Bearing	5
Modeling of Impact Plasto-Elastohydrodynamic Lubrication Problems—Consideration of Effects of Navier-Slip and Lubricant Rheology	5
Equivalent Wear Study of Slipper Pair Based on the Interaction Model of Oil Film Lubrication and Eccentric Wear	5
Building Towers and Bridges on the Foundations of Tribology	5
Quantification of Surface Roughness Using Fringe Projection Profilometry for Metallic Machined Surfaces	5
Developing Elastic–Plastic Material Models for Pressure Measurement Films in a Steel–Steel Contact for Smooth and Rough Surfaces	5
Proposed Surface Topography for Frosting Inhibition and Ease Ice Removal	5
The Improved Dynamics Model of Faulty Bearings Considering Raceway Surface Fatigue Defect Morphology	5
Closure to “Influence of Material and Lubricant Parameters on the Performance of Elastohydrodynamic Lubrication Under Oscillatory Motion” (Abd Al-Samieh, M. F., and Shaheen, M., 2026, ASME J. Tribol.,	5
Tribological Properties of Fused Deposition Modeling-Printed Polylactic Acid and PLA-CF: Extrusion Temperature and Internal Structure	5
Mixed Lubrication Analysis of Scrolls Lubricated With CO2/Oil Mixture Based on a Homogeneous Model	5
Analysis of the Transitional Contact Effect of Four-Point Contact Ball Bearings Considering Sliding Friction	5
Analysis of the Frictional Properties of Carbon Nanotube-Coated Aramid Fiber-Reinforced Epoxy Composites Using Machine Learning Techniques	5
Comparative Analysis of the Wear Behavior of TiN/TiAlN-, TiAlVN-, and TiAlYN-Coated Tools in Milling Operations of Inconel 718	5
Tribofilm Enhancement of Aminoguanidine Ionic Liquid With ZDDP/MoDTC for Heavy-Duty Interface	5
Effect of Friction on Critical Cutting Depth for Ductile–Brittle Transition in Material Removal Mechanism	5
Nanoindentation, Scratch Resistance, and Elevated Temperature Tribological Behavior of AZ31-B4C Composites	5
Analysis of Precision Loss of Double-Nut Ball Screw Considering Dimensional Error and Preload Degradation	5
A Proposed Pressure–Viscosity Coefficient Model Through Processing of Falling Body Viscometry Data for Di-(Ethylhexyl) Sebacate	5
Investigation of the Effect of Underpressure Between Main and Dust Lip on the Performance of Radial Shaft Seals Under Instationary Shaft Movements	5
Tribological Behavior and Wear Mechanism of Heavy-Load Woven Self-Lubricating Liners Under a Wide Temperature Range	5
Contacting Micro Asperity of a Deformable Surface	5
The Machine Learning–Based Prediction and Experimental Validation of the Friction Performance of Recycled Brake Materials	5
Simulation and Experimental on Thermal Behavior of Hydrostatic Thrust Bearing Based on Superhydrophobic/Oleophobic Surface	5