International Journal of Impact Engineering

Article	Citations
Editorial Board	96
Numerical validation of composite panel impact tests	83
Dimensionless parameters for ballistic performance evaluation of ceramic-faced bicomponent targets against sharp-nosed projectiles	81
Investigation of blast-induced cerebrospinal fluid cavitation: Insights from a simplified head surrogate	79
Preliminary study of radio frequency waves in hypervelocity impact plasma	72
Damage characteristic of electronic devices caused by products generated by Al/Ep/KMnO4/TiH2 active material projectile hypervelocity impacting on aluminum target	67
Research on the evolution of state field and damage range of multiple source cloud explosions	65
A generalized model for one dimensional impact response of a heterogeneous layered medium	62
An improved dynamic constitutive model for ceramics	61
Dynamic cumulative damage characteristics of deep-buried granite from Shuangjiangkou hydropower station under true triaxial constraint	59
Experimental and numerical study of the interaction between dynamically loaded cracks and pre-existing flaws in edge impacted PMMA specimens	57
Dynamic Brazilian splitting experiment of bedding shale based on continuum-discrete coupled method	53
Impact dynamics of a free-falling reference test mass in space	52
Blast-resistance characteristics and design of steel wire reinforced ultra-high performance concrete slabs	52
Velocity-space analysis method for hazardous fragments in debris clouds	51
Effects of lateral inertia on the group velocities and specific damping capacities of viscoelastic polymeric rods	51
Stochastic analysis of dynamic fracture of concrete using CT-image based mesoscale models with a rate-dependent phase field method	51
Damage response of high elastic polyurea coated liquid-filled tank subjected to close-in blast induced by charge with prefabricated fragments	48
Experimental and numerical investigation of badarpur sand subjected to air-blast loading	46
Testing and modelling of aluminium cans for prismatic lithium-ion cells under crash loading	46
Numerical and theoretical modeling of the elastic-plastic bulging deformation of UHMWPE composite laminate under high-speed impact	44
A new equivalent method for complex-shaped pulse loading based on saturation analysis and membrane factor method	44
Experimental evaluation on the mitigation performance of double-layered Kirigami corrugated cladding against impact load	43
Indentation modelling of aluminium cladding panels subjected to hailstone impact	43
Predicting the dynamic response of elastic-plastic beams by dimensional analysis	42

Determination and evaluation of Holmquist-Johnson-Cook constitutive model parameters for ultra-high-performance concrete with steel fibers	42
Dynamic response of rock sheds to successive rockfall impacts using lightweight expanded clay aggregate (LECA) cushions: An experimental and numerical study	42
Typical fracture modes of metal cylindrical shells under internal explosive loading	42
Experimental and numerical investigation of the behavior of multi-layer windshield consisting of glass and polycarbonate against bird strike	41
Constitutive and impact response of AA7475-T7351 under different projectile shapes and velocities: An experimental and numerical investigation	41
Prediction of perforation into concrete accounting for saturation ratio influence at high confinement	40
3D scanning technique for morphological analysis of behind armour blunt trauma	39
Characterization and mechanism of petaling failure under high-velocity impact using plastic state-based peridynamics	39
Low-density sabot stripper: A feasibility study	37
Bridging the gap between rate-dependent plasticity and stress wave dynamics: Calibrating a constitutive model for high-strength steel by inverse optimization	36
Protective potential of high-contrast mineral-bonded layers on reinforced concrete slabs subjected to uniform shock waves	36
Blast resistance of grouting sleeve connected precast concrete columns under close-in explosions	36
Influence of the projectile geometry on the momentum transfer from a kinetic impactor and implications for the DART mission	35
Numerical and experimental study of the second ejection from a grooved tin surface under laser-driven shock loading	35
Understanding the impact properties and damage phenomenon of ultra-lightweight all-thermoplastic composite structures	35
A study on energy conversion behavior of single-shot elastic-plastic impact during shot peen forming	35
Theoretical analysis of ionization of spherical aluminum alloy projectile impacting aluminum alloy target in hypervelocity impact	34
Subdomain hybrid cellular automata method for material optimization of thin-walled frame structure under transverse impact	33
Analysis of hypervelocity-impacted thin films for space applications	33
Development of modelling design tool for harpoon for active space debris removal	33
Impact damping performance and mechanisms of 3D-printed density gradient cylindrical shell chains	33
A novel size distribution model for debris generated by in-orbit collisions	32
Hypervelocity penetration behavior and fireball radiation characteristics of tungsten-zirconium reactive projectile	32
The influence of interlayer properties on the response of laminated glass to low-velocity hard-object impact	32
Hydrodynamic model of a collision of a spherical plastic ice particle with a perfectly rigid substrate	32
Microstructure evolution of 6252 armor steel under hypervelocity impact	32
Experimental and numerical simulation investigation of cavitation phenomenon during bubble pulsation process	31
Erratum to ‘Dynamic impact testing of cellular solids and lattice structures: Application of two-sided direct impact Hopkinson bar’ International Journal of Impact Engineering 148 (2021) 103767	31
Finite element modelling and experimentation of plain weave glass/epoxy composites under high strain-rate compression loading for estimation of Johnson-Cook model parameters	31
Mechanical behavior and constitutive model of frozen soil subjected to cyclic impact loading	30
Compressive mechanical behaviors of Q235B steel over a wide range of temperatures and strain rates	30
Three-dimensional trajectory prediction and analysis of elliptical projectile	30
Ballistic properties of bioinspired nacre-like ceramic/polyurea staggered composite structures	29
Impact resistance of ultra-high performance concrete strengthened reinforced concrete beams	29
Failure mechanism and dynamic response of reinforced concrete joints under impact load acting on beam ends	29
Influence of printing direction on the dynamic response of additively-manufactured polymeric materials and lattices	29
A review of Whipple shield ballistic limit equations	29
Impact of an ice particle onto a rigid substrate: Statistical analysis of the fragment size distribution	28
Approximate theory of armour perforation by ductile hole expansion	28
Theoretical analysis on the dynamic compressive behavior of cellular solids with non-linear variation in cross-sectional area	28
Editorial Board	28
Tracking the explosion characteristics of the hydrogen-air mixture near a concrete barrier wall using CESE IBM FSI solver in LS-DYNA incorporating the reduced chemical kinetic model	28
Editorial Board	28
A new compact, self-compressing, vertical one and two-stage gas gun at the University of Kent	27
Prediction of dynamic shear and maximum displacement of clamped reinforced concrete beams subjected to impact loading	27
Ballistic behavior of bioinspired layered-and-staggered concrete	27
Experimental study on flash radiation and damage characteristics of C/SiC composites induced by hypervelocity impact	27
Numerical and analytical study of the stiffener effects on the structural resistance of a plate cut by a wedge	27
Analysis and evaluation of suitability of high-pressure dynamic constitutive model for concrete under blast and impact loading	27
A novel simplified ballistic impact theory for woven composites	27

Numerical and experimental studies on specimens with integrated pulse-shaper used for the instrumented Taylor impact test to measure stress-strain curves at high rates of strain	27
An experimental and numerical study on the behaviors of adhesively-bonded steel double-hat section components under axial impact loading	27
Concrete spalling behavior and damage evaluation of concrete members with different cross-sectional properties under contact explosion	27
Effect of relative density and grain size on the internal flow field during the ballistic penetration of sand	27
Experimental investigation of shock response to an insensitive explosive under double-shock wave	26
Preface for T. X. Yu 80th Birthday Special Issue	26
Novel method in the modeling of adiabatic shear bands in ballistic impact: An application on Inconel 718 alloy	26
Effect of tungsten fiber diameter on the dynamic compression properties of tungsten fiber/Zr-based bulk metallic glasses matrix composite	26
Modelling of friction stir welded AA2139 aluminium alloy panels in tension and blast	25
An approximate compressible fluid model of long-rod hypervelocity penetration	25
Understanding the impact response of bird strikes on engine blades using a novel wedge-Hopkinson bar system	25
Temperature effects on the low-velocity impact of FML panels: Experimental and numerical analyses	25
The role of granular buoyant force of projectile in determining the penetration depth	25
Fragment dispersion characteristics of uncoupled charge structures with internal explosive loading	25
Analysis on dynamic shear fracture based on a novel damage evolution model	25
Study on mechanical properties of sandy mudstone under the combined dynamic and static loading condition	25
Experimental and numerical studies on dynamic mechanical properties of threads under impact loads	24
Crashworthiness and dimensional stability analysis of zero Poisson's ratio Fish Cells lattice structures	24
Modelling and optimisation of TPMS-based lattices subjected to high strain-rate impact loadings	24
A reinforced concrete shear wall building structure subjected to internal TNT explosions: Test results and numerical validation	24
Mechanical responses of CFRP/PVC foam sandwich plate impacted by hailstone	24
Gas gun driven dynamic expansion of 3D-printed AlSi10Mg rings	24
Dynamic behavior and thermomechanical characterization of laser powder bed fusion and wrought Ti–6Al–4V	24
Heat generation induced by plastic deformation during particle normal impact	24
A graph network-based learnable simulator for spatial-temporal prediction of rigid projectile penetration	24
Experimental and numerical study on the ballistic performance of a ZnO-modified aramid fabric	24
On the strain rate-dependent mechanical behavior of PE separator for lithium-ion batteries	24
Impact properties of uniaxially thermoformed auxetic foams	23
Importance of gravity and friction on the targeted energy transfer of vibro-impact nonlinear energy sink	23
Momentum enhancement simulations for hypervelocity impacts on sandstone	23
Editorial Board	23
Projectile nose-length effect on specific cavitation energy and ballistic limit velocity and thickness	23
Fracture delay effect: Analogy between crack initiation due to short pulse loads and mass-spring system failure	23
Spatial decay of electromagnetic waves from hypervelocity impact plasmas	23
Distribution of shear fragments classified by morphology	23
A nonlinear visco-hyperelastic model for spray polyurea and applications	23
Impacts into porous graphite: An investigation on crater formation and ejecta distribution	23
Numerical investigations on the strain-rate-dependent mechanical behavior and size effect of RC shear walls	23
The effect of quasi-static pressure on strain growth in an elastic ring	23
Dynamic plastic instability of ring-shaped aluminum alloy with different interface behaviors	22
Oblique penetration of tungsten spheres against steel targets based on compressible and incompressible cavity expansion theory	22
Modelling of carbon/epoxy sandwich panels with agglomerated cork core subjected to impact loads	22
A stochastic gradient estimate-based formulation for capturing the high strain-rate behaviour of a ductile target subjected to ballistic impact	22
Study the effect of circular hole on dynamic fracture properties of cracked PMMA specimen under impact loads	22
Analysis of hydrodynamic ram and cavity evolution characteristics during high-velocity penetration of Zr55Cu30Al10Ni5 fragments into water-filled containers	22
Corrigendum to An improved method for calculating the peak explosion pressure on the borehole wall in decoupling charge blasting [International Journal of Impact Engineering [Dec 2020, IE_103695]]	22
Scaling law for Rayleigh-Taylor instability of aluminum tube under cylindrical implosion	22
Ductile fracture behavior of BCC and FCC metals at a wide range of strain rates	22
Ballistic limit predictions for perforation of multi-layered aluminium armour targets by rigid, nose-pointed projectiles	21
Impact of a pressurised membrane: Contact time	21
Projectile fragmentation and debris cloud formation behaviour of wavy plates in hypervelocity impact	21
Analytical modeling of the ballistic impact performance of glass fabric - epoxy composites at low temperatures	21
Experimental and numerical investigation on the attenuation of blast waves in concrete induced by cylindrical charge explosion	21
Nonlinear transient response of elastoplastic sandwich beam in underwater blast and the fluid-structure interaction	21
Blast response and optimization of cylindrical sandwich shells with toroidal tubular cores	21
On the ricochet of sharp-nosed rigid projectiles from metallic plates	21
A novel oblique impact model for elastic solids	21
Experimental, analytical, and numerical investigation of multi-chambered fluid-filled barrier for highway crash attenuators	21
High strain rate damage sensing in intra-ply hybrid composites under dynamic shear loading	21
Shock Loading Mitigation Performance and Mechanism of the PE/Wood/PU/Foam Structures	21
Editorial Board	21
Investigation of blast-induced rock fragmentation and fracture characteristics with different decoupled charge structures	21
Deformation and failure properties of cylindrical battery packs under quasi-static and dynamic indentations	21
Data-driven parameter identification to simulate progressive damage in fiber reinforced laminates under low velocity impact	21
Effect of adhesive on ballistic performance of multi-layered steel	20
Kinetic energy for the frictional impact of two link chain	20
An analytical approach to deduce loading rate-sensitivity of fracture mode of concrete and mortar	20
Slip rate and pressure sensitive friction measurement for crash simulation	20
Editorial Board	20
13-degree impact test of long-fiber-reinforced thermoplastic composite wheel manufactured by injection molding–Improved co-simulation approach and experimental investigation	20
Impact testing of high-density polyethylene structure	20
Impact resistance of armor steel/ceramic/UHPC layered composite targets against 30CrMnSiNi2A steel projectiles	20
Editorial Board	20
Temperature influence on impact protection performance of steel-plastic structures–Manifested by head impact against pillars of passenger car	20
Strain rate sensitivity of rotating-square auxetic metamaterials	20
A material selection approach for protecting carbon/epoxy laminates against single and repeated low-velocity impacts	20
Finite element simulation of axial crushing of flat and C-channel composite coupons using a modified mesomodel	20
High-velocity impact resistance of doubly curved sandwich panels with re-entrant honeycomb and foam core	19
Editorial Board	19
Editorial Board	19

Nonlinear transient response of elastoplastic sandwich beam	19
Analytical model of penetration depth and energy dissipation considering impact position	19
Enhanced ballistic resistance of multilayered cross-ply UHMWPE laminated plates	19
Augmenting foam-core sandwich panel with toughened blanket for enhanced orbital debris protection	19
On the saturated impulse for a circular hollow beam under pressure pulse loading	19
Loading measurement for intermediate strain rate material test based on dynamic oscillation	19
Editorial Board	19
Corrigendum to “Modeling of fuel in crashworthiness study of aircraft with auxiliary fuel tank” [Int. J. Impact Eng. 161 (2022) 104076]	19
A unified impact displacement prediction model for geometrically similar RC beams: from test specimen to prototype component	19
Experimental study on the blast resistance of polyurea-coated aramid fabrics	19
The damage characteristics and formation mechanism of ultrahigh strength 7055 aluminum alloy under hypervelocity impact	19
Functional gradation of aluminum alloy by impact of ballistics as severe plastic deformation process	19
Yawing motion of rifle bullets penetrating into ballistic gelatin	19
Enhancing impact resilience of thermal battery through honeycomb-structured aluminum buffering devices: Insights from large-scale gas-gun tests and simulations	19
Application of ramp-wave loading for spallation tests using a graded generalized impedance flyer	19
Energy release and damage characteristics induced by fracture planes in face destress blasting	19
The design, modelling and testing of an electric gun load for the study of dynamic material properties	18
Effect of high-strength rebar and ultra-high-performance concrete on blast resistance of slabs under contact explosion loads	18
AEM analysis of asphalt pavement on PC bridge under the coupling effect between impact from ruptured vertical PC bars and temperature	18
Response of thin walled metallic structures to underwater explosion: A review	18
Numerical and experimental investigation of a variable cross-section hollow BCC lattice subjected to axial and oblique impact loadings	18
Investigation of resistance spot weld failure in tailor hot stamped assemblies	18
Critical assessment and demonstration of high-emissivity coatings for improved infrared signal quality for Taylor–Quinney coefficient experimentation	18
Experimental and analytical investigations on single and repetitive impact failure responses of composite sandwich panels with orthogonal woven GFRP facesheets and PVC foam cores	18
Implementation of three-dimensional contact algorithm in numerical manifold method for the structural impact simulation	18
A data-driven procedure for the analysis of high strain rate tensile tests via visible and infrared image processing	18
Three-dimensional mesoscopic investigation on equation of state for dry sand under shock compression	18
The effect of current rise time on the acceleration of thick flyers to hypervelocities using an electric gun	18
TDOF model for UHPC members under lateral low-velocity impact	18
Parameter calibration and numerical algorithm realization of physically visco-hyperelastic constitutive model based on compression experiment of EPDM	18
Competing fracture modes in Al-steel resistance spot welded structures: Experimental evaluation and numerical prediction	17
The dynamic response of composite auxetic re-entrant honeycomb structure subjected to underwater impulsive loading	17
Rigid–flexible coupling design and reusable impact mitigation of the hierarchical-bistable hybrid metamaterials	17
A novel technique to measure the biaxial properties of materials at high strain rates by electromagnetic Hopkinson bar system	17
Piezo-driven clamp release for synchronisation and timing of combined direct-shear stress waves	17
New method for predicting perforation parameters of a concrete slab target to a penetrating projectile	17
Impact resistance and energy absorption characteristics of nickel-based alloy ring at elevated temperatures	17
The composite damage effects of explosion after penetration in plain concrete targets	17
Ice breaking by low-velocity impact with a rigid sphere	17
Impact response of prismatic Li-ion battery jellyrolls and cells	17
Dynamic mechanical behavior of additively manufactured bio-inspired metallic lattice structure subjected to high strain rate impact loading	17
Hybrid interspaced and free-boundary aramid fabric back bumper for hypervelocity impact shielding system	16
Cohesiveness and penetration performance of jet: Theoretical, numerical, and experimental studies	16
Stress Wave Mitigation Properties of Dual-meta Panels against Blast Loads	16
On the penetration of rigid projectiles in water	16
Modeling and simulations of high and hypervelocity impact of small ice particles	16
Analysis of passenger car crash with a cable barrier installed with anti-glare screens on a horizontal convex road curve with 400 m radius	16
Elastoplastic impact of a long rod on a flexible large plate	16
Effect of confining pressure on damage accumulation of rock under repeated blast loading	16
Ballistic response of ultra-high molecular weight polyethylene laminate impacted by mild steel core projectiles	16
A dynamic constitutive model for carbon nanotubes (CNTs) modified unidirectional fibre reinforced plastic laminates	16
Objective evaluation on performance of billiard cue in hitting ball	15
Finite element analysis of porous polymer coated pipelines subjected to impact	15
Evaluation of the mean crushing load of perforated circular tubes undergoing progressive collapse	15
Studying the strengthening mechanism and thickness effect of elastomer coating on the ballistic-resistance of the polyurea-coated steel plate	15
Plasma production and composition from hypervelocity impacts on solar cell cover glass	15
Experimental and numerical investigation on projectile penetration resistance of prefabricated concrete targets	15
Dynamic similitude technique for predicting the behaviour of structures subjected to impact loads	15
High-velocity impact damage and compression after impact behavior of carbon fiber composite laminates: Experimental study	15
Experimental study of damage to ultra-high performance concrete slabs subjected to partially embedded cylindrical explosive charges	15
Biography of Prof. T.X. Yu	15
High strain rate behaviour of cohesive soils	15
Constitutive modelling of UHPCC material under impact and blast loadings	15
A non-linear viscoelastic material model with progressive damage based on microstructural evolution and phase transition in polycrystalline ice for design against ice impact	15
Static and dynamic properties of a perforated metallic auxetic metamaterial with tunable stiffness and energy absorption	15
A comparison study on numerical analysis for concrete dynamic failure using intermediately homogenized peridynamic model and meso-scale peridynamic model	15
Numerical study on the phase-transition characteristics of debris cloud under hypervelocity impacts	15
Dynamic behaviors of unreinforced and spray polyurea retrofitted brick masonry infill walls under blast loads: Shock tube test and analyses	15
Simplified micro-model for brick masonry walls under out-of-plane quasi-static and blast loadings	15
A numerical investigation of the nucleation and the propagation of NiTi martensitic transformation front under impact loading	15
Impact damage of composite laminates with high-speed waterjet	15
Experimental and numerical investigation on the ballistic resistance of 2024-T351 aluminum alloy plates with various thicknesses struck by blunt projectiles	15
Crushing responses and energy absorption characteristics of the dynamic stiffening porous material subjected to different strain rates	15
Theoretical model for predicting stabbing resistance of soft body armor comprising fibrous composites	15
Experimental characterization of material strain-rate dependence based on full-field Data-Driven Identification	15
Fast optimisation of honeycombs for impact protection	15
Experimental and numerical investigation on radial impact of pneumatic tyre	15
Dynamic failures at the metal-glass interface under impact loading	14
Experiment and numerical investigations of ultra-high toughness cementitious composite slabs under contact explosions	14
Editorial Board	14
On the use of a SEBS polymer gel block as a new ballistic target to assess blunt ballistic impacts: Application to a wide range of LLKE projectiles	14
Simple shear behavior and constitutive modeling of 304 stainless steel over a wide range of strain rates and temperatures	14
Impact Response of a Ring on Viscoelastic Foundation	14
Perforation of 5083-H131 aluminum armor plates by conical-nose tungsten rods with and without target inertia	14
Penetration dynamics of a carbonate sand: A synchrotron phase contrast imaging study	14
The influences of interface effect of stuffed layer on the performance of improved Whipple shields	14
An arbitrary Lagrange-Eulerian investigation of HRAM shallow jet pre-spurt formation and time sensitivities to impact plate dynamics	14
Experimental and 3D mesoscopic numerical simulation study of kinetic projectile penetrating into concrete	14
Experimental and numerical study on ground shock propagation in calcareous sand	14
Determination of critical ricochet conditions for oblique impact of ogive-nosed projectiles on concrete targets using semi-empirical model	14
Aluminium plates with geometrical defects subjected to low-velocity impact: Experiments and simulations	14
Editorial Board	14
Structural response of steel-concrete composite panels to near field simultaneous blast and fragmentation loading	14
Improving strength and impact resistance of 3D printed components with helicoidal printing direction	14
Editorial Board	14