Journal of Energy Engineering

Papers
(The median citation count of Journal of Energy Engineering is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
Experimental Study of Influencing Factors on Mechanical Properties for New Coal-Like Materials38
Numerical Comparison of Hydrogen and CO2 Storage in Deep Saline Aquifers from Pore Scale to Field Scale32
Advances in Subsurface Energy Exploitation and Storage24
A Novel Porous Diffusion Model during Gas Desorption in Coal Based on Fractal Characteristics of Pore Structure23
Identification of Catastrophic Cascading Failures in Protected Power Grids Using Optimal Control18
Quantitative Evaluation of Quality-Control Factors of a Tight Sandstone Reservoir: A Case Study of the Shihezi Formation of Permian in the Yanan Gas Field of the Southeast Ordos Basin of China16
Study of Simulation Method of Porosity and Permeability Parameters of Salt Deposition Reservoir Based on Phase Equilibrium Calculation15
Early Prediction of Remaining Useful Life for Grid-Scale Battery Energy Storage System14
Short-Term Capacity Estimation and Long-Term Remaining Useful Life Prediction of Lithium-Ion Batteries Based on a Data-Driven Method14
Analysis of the Influence of Dual Spark Plugs on the Combustion Stability of a Shale-Gas Engine14
Novel Measure of Innovation: Application to the Onshore Wind Energy Sector in the US13
Performance Analysis of an Innovative PCM-Based Internal Cooling Design for Cylindrical Lithium-Ion Battery Considering Compact Structure and Uniform Temperature12
Reservoir Characteristics and Major Controlling Factors of the Cambrian Xixiangchi Formation, Central Sichuan Basin, Southwest China11
Study of the Performance of a Photovoltaic and Heat Pump Coupling System in a Low-Carbon Community10
Influence of Diesel–Rocket Propellant-3 Wide Distillation Blended Fuels on Combustion and Particle Emissions of a Diesel Engine10
Optimal Operation Method for Electricity–Heat Integrated Energy System Considering Vulnerability Prevention10
Performance Improvement of Proton Exchange Membrane Fuel Cell by Modified Flow Field Design10
Improved Lignite Predrying System Integrated with Heat and Water Recovery from Wet Flue Gas at Lignite-Fired Power Plants: Energy and Water Conservation10
Hollow-Structured Bilayer System for Windowpane Insulation9
Pore-Scale Simulation of Tortuosity in the Catalyst Layer of Proton Exchange Membrane Fuel Cells9
A Thermal-Hydraulic-Mechanical Coupling Simulation of Fluid Flow and Heat Transfer Specifically in Crossed-Rough Fractures in a Geothermal Reservoir9
Assessment of the Effects of Nanofuels on Combustion and Emissions in a Diesel Engine by Considering Various Types of Nanoparticles in Combination with Biodiesel or Ethanol9
Development of a High-Power Density Diesel Engine with a Heat-Insulation Coating: Application of Ultrahigh-Pressure Fuel Injection9
Insights into the Multiscale Conductivity Mechanism of Marine Shales from Wufeng–Longmaxi Formation in the Southern Sichuan Basin of China9
Energy Trading and Management Strategies in a Regional Integrated Energy System with Multiple Energy Carriers and Renewable-Energy Generation9
Analysis of the Heat-Flux Characteristics of the Turbulent Boundary Layer in the Trombe Wall9
Experimental Research of the Characteristics of Microscopic Pore Production during CO2 Displacement in a Shale Oil Reservoir8
Effect of Isopropyl Alcohol Concentration on the Size and Number of Droplets after Coal-Water Fuel Spraying8
Geochemistry of High-Maturity Crude Oil and Gas from Deep–Ultradeep Reservoirs and Their Geological Importance in a Foreland Basin: A Case Study of the Southern Thrust Belt, Junggar Basin, Northwest C8
Experimental Investigation and Analysis of Three Dilution Strategies in an SI Turbocharged Engine Regarding Combustion, Fuel Consumption, and Emissions8
A New Index to Evaluate the Seepage Capacity of Water-Wet Sandstone Reservoirs8
Cocombustion of Coal–Water Fuel with Fuel Oil8
Influence of Swirl Flow on Combustion and Emissions in Spark-Ignition Experimental Engine8
Flame Characteristics and Abnormal Combustion of Methane Port Injection and Isooctane Direct Injection with Injection Timings Considered8
A Laboratory-Scale DEM Simulation on Multiwell Simultaneous Fracturing to Improve the Understanding of Interfracture Interference8
Thermodynamic, Economic Analysis, and Multiobjective Optimization of a Novel Transcritical CO2 Rankine Cycle with a Vortex Tube7
Potential of Di-n-Butyl Ether as an Alternative Fuel for Compression Ignition Engines with Different EGR Rates and Injection Pressure7
Design and Application of a New Self-Powered Sensing Device Based on MTEG and FTENG7
Numerical and Experimental Study by Quasi-Dimensional Modeling of Combustion and Emissions in Variable Compression Ratio High-Speed Spark-Ignition Engine7
A Review of Thermal Management System and Control Strategy for Automotive Engines7
An Experimental Study of the Effects of Heat-Sink Surface Form on PV Module Cooling and Electrical Performance7
The Appropriate Context for the Analysis of the Explosive Mode in Reactive Systems7
Orthogonal Optimization of a Liquid Cooling Structure with Straight Microtubes and Variable Heat Conduction Blocks for Battery Module7
Oxyfuel Cofiring Characteristics of Biomass with Ultralow Volatile Carbon-Based Fuels7
Simulation of Coal Gasification in Texaco Gasifier: Kinetics-Based Aspen Plus Model7
Numerical Simulation Study of Radial Seepage Evolution of Coal Seam Water Injection Borehole7
Prediction of Coal Seam Permeability by Hybrid Neural Network Prediction Model7
Experimental Study of the Unsteady Heat Transfer of the Wall with Phase Change Interlayer7
Heat Dissipation Improvement of Lithium Battery Pack with Liquid Cooling System Based on Response-Surface Optimization7
Online Load-Scheduling Strategy and Sizing Optimization for a Stand-Alone Hybrid System6
Retraction: Anyanwu, I. S., A. O. Larry, Z. Liu, and K. Jiao. 2022. “Water Transport in GDL Microstructures of Nonuniform Fiber Diameter Arrangement.” J. Energy Eng . 146
Influence of Extension Ratio on the Performance of the Modified Savonius Hydrokinetic Turbine6
Evaluation and Optimization of Heat Extraction Strategies Based on Deep Neural Network in the Enhanced Geothermal System6
Potential for Carbon-Neutral Advanced Biofuels in UK Road Transport6
Erratum for “Online Load-Scheduling Strategy and Sizing Optimization for a Stand-Alone Hybrid System” by Antonio J. Gil Mena, Abderraouf Bouakkaz, and Salim Haddad6
Influence of Burner Mass-Flow Rate Bias and Injection Direction Offset on High-Temperature Corrosion and Combustion in a 660-MW Opposed Swirling-Fired Boiler6
Adaptive Material Balance Method for Reserve Evaluation: A Combination of Machine Learning and Reservoir Engineering6
Feasibility of Blockchain-Based Energy Trading within Islanded Microgrids in Alexandria, Egypt6
Retraction: Mwakipunda, G. C., E. E. Nyakilla, J. Sanford, and F. Mwizarubi. 2022. “CO2 Sequestration and Enhanced Shale Gas Recovery by CO2 Injection: Numerical Simulation Method.” J. 6
A Hybrid Multivariate Multistep Wind-Speed Forecasting Model Based on a Deep-Learning Neural Network6
Surface Modification of Commercial YSZ with SiO2 and SnO2 via Low-Temperature Chemical Vapor Deposition to Improve Electrochemical Performance6
Effects of Combustion Parameters on Emissions of Diesel, Diesel/n-Butanol, and Diesel/n-Butanol/2-Ethylhexyl Nitrate Fuels at Different Intake-Oxygen Concentrations in a Diesel Engine6
Effect of Two Mechanisms Contributing to the Cyclic Variability of a Methane–Hydrogen-Fueled Spark-Ignition Engine by Using a Fast CFD Methodology5
Combustion Interactions of Blended Chars under Oxidation and Gasification Competition in Oxy–Fuel Condition5
Thermal Analysis of Lightweight Clay Bricks with Typha-Fiber Additives5
Geochemical Characteristics and Hydrocarbon Expulsion Efficiency of Different Types of Shale: Taking Chang 7 Member and Shanxi Formation in Ordos Basin, China, as Examples5
Calculation of Combustion Phases in a Diesel Engine Based on the Difference between Motoring and Combustion Pressures5
Computational Analysis of Spray Formation in Large Two-Stroke Marine Diesel Engine Atomizers5
Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel5
Effects of Combustion and Emissions of Turbulent Jet Ignition with a Small-Volume Prechamber for a Gasoline Engine5
Effect of Phase Change Materials Integration on the Thermal Performance of a Parabolic Trough Collector5
Interaction of Kerogen Combustion and Pyrolysis and Continuous Oil Production during In Situ Combustion for Oil Shale Upgrading5
A Risk-Based Framework to Improve a Distribution System’s Resilience against Earthquakes5
Research on Productivity Prediction Model of Three-Dimensional Directional Wells in Different Reservoirs5
New Hybrid Method for Gas-Hydrate Digital Rock Reconstruction and Its Accuracy Evaluation4
Effects of the Supercritical CO2 Exposure Duration on Coal Permeability and Microstructural Changes4
Characteristics of Electric Energy Conversion in Pneumatic System Based on Piezoelectric Generator4
Design of a Novel Multidimensional Forced-Convections Flow Channel with Both Blockages and Under-Rib Channels for PEMFC4
Experimental Investigation of the Effect of Direct Water Injection on Combustion, Knock, and Emissions for LPG-Diesel Dual-Fuel Engine4
Experimental Investigation on Effects of Diesel Oxidation Catalysts on Emission Characteristics of a Methanol-Diesel Dual-Fuel Engine4
Study of the Performance of Hydrogen Production by Autothermal Steam Reforming as Dimethyl Ether in a Fan-Shaped Channel Reactor4
Hybrid System of Air-Breathing PEM Fuel Cells/Supercapacitors for Light Electric Vehicles: Modeling and Simulation4
Coordination Design of PSS and STATCOM Based on the IDBO Algorithm to Improve Small-Signal Stability of Wind PV Thermal–Bundled Power System4
Experimental and Numerical Simulation Study on the Influence of Fracture Distribution on Gas Channeling in Ultralow-Permeability Reservoirs4
Microexplosion Kinetics of Alcohol-Based Emulsified Biodiesel Droplets Evaporated in High Temperature4
The Blade Design of a Bionic Shark Fin Airfoil for a Horizontal Axis Tidal Current Turbine4
Effect of the Shape Parameter on Droplet Behavior in Multiple Channels of a Proton-Exchange Membrane Fuel Cell4
Energy Management Strategy Considering Fuel Economy and Life of Fuel Cell for Fuel Cell Electric Vehicles4
Enhancing Proton-Exchange Membrane Fuel-Cell Heat Transfer Performance with Embedded Cooling Channel Design: A Systematic Numerical Study4
Energy, Exergy, and Economic Investigation of the Effect of Nanoparticle Mixture Ratios on the Thermal Performance of Flat Plate Collectors Using Al2O3–ZnO Hybrid Nanofluid4
Numerical Simulation of a Lab-Scale Molten-Salt External Solar Receiver and Its Experimental Validation4
Sliding Mode Control for Power Tracking of Proton-Exchange Membrane Fuel-Cell System4
Three-Dimensional Structure Research of Anode-Supported Planar Solid Oxide Fuel Cells4
Power Extraction from Pico Hydro Turbines Installed in Water Pipelines4
Research on Different Design of Plane Flow Fields about Intersection Node in PEMFC4
Monitoring the Combustion Characteristic of Premixed Burners with Flame Ionization Current4
Characterization of Gas Saturation in Tight-Sandstone Reservoirs with Rock-Physics Templates Based on Seismic Q4
Study of Fracture Propagation Mechanism of Horizontal Well Fracturing in Roof of Coal Seams4
Notice of Redundant Publication for “CO2 Sequestration and Enhanced Shale Gas Recovery by CO2 Injection: Numerical Simulation Method” by Grant Charles Mwakipunda, Edwin E. Nyakilla, Jennifer Sanford, 4
Effects of NOx-SOx Addition on Methane Ignition: Toward a Kinetic Understanding for Marine Engine Applications4
Multiobjective Optimization of a Combined Heating and Power System Based on Compressed-Air Energy Storage and Thermochemical Technology4
Performance Enhancement of Hydraulic Axial Turbine Rotor Using Enclosure at Upstream and Downstream Side4
Effect of Pressure on Local Flame Propagation Characteristics of Hydrogen-Rich Syngas Turbulent Premixed Flame3
Numerical Investigation of Dynamic Behavior of Water with Different Initial Forms in Wave Channel3
Numerical Research on the Effect of Operating Parameters on Combustion and Performance Characteristics of Cyclohexane/N-Heptane HCCI3
Multiobjective Operation Optimization of Depleted Gas Storage Based on a Reference Vector–Guided Evolutionary Algorithm3
Numerical Simulation of Low-Temperature Thermal Management of Lithium-Ion Batteries Based on Composite Phase Change Material3
Vertical-Axis Wind Turbine Blade-Shape Optimization Using a Genetic Algorithm and Direct-Forcing Immersed Boundary Method3
Parallelizable Permeability Estimation of Digital Porous Media for Sandstone Using Subvolume Properties for Flow in Porous Media3
Two Three-Dimensional Super-Gaussian Wake Models for Wind Turbine Wakes3
Optimization of Energy Saving and Fuel-Cell Durability for Range-Extended Electric Vehicle3
Experimental Study of the Flame Structural Characteristics and Self-Similar Propagation of Syngas and Air Turbulent Expanding Premixed Flame3
Erosion Wear on the Runner Shroud of a Francis Turbine3
Effect of Inlet Mixture Stratification on Bluff-Body Stabilized, Turbulent, Prevaporized n-Heptane-Air Flames3
A Comparative Study of the Influences of Leading-Edge Suction and Blowing on the Aerodynamic Performance of a Horizontal-Axis Wind Turbine3
Design and Optimization of Dimethyl Ether Steam-Reforming Reactor3
Effects of In Situ Stress and Multiborehole Cluster on Hydraulic Fracturing of Shale Gas Reservoir from Multiscale Perspective3
Thermal Study of Clay Bricks Reinforced by Dry-Grass Fibers3
Reliability Evaluation of Distribution Network with Electric Vehicles and Distributed Generations Based on Network Equivalence and Sequential Monte Carlo Method3
Study of Gas Migration in the Fissures of Closed Goaf and CH4 Production Characteristics in Vertical Wells under Different Gas Injection Conditions3
Thermodynamic and Economic Analysis of a Novel Solar-Assisted Ground Source Absorption Heat Pump System3
Transient Simulation of a Building-Integrated Hybrid Solar Collector/Nocturnal Radiator with In-Built Thermal Storage for Space Cooling in Owerri, Nigeria3
Studying Dynamic Pricing in Electrical Power Markets with Distributed Generation: Agent-Based Modeling and Reinforcement-Learning Approach3
Optimization of Hydraulic Fracture Treatment Parameters for Normally Pressured Longmaxi and Wufeng Shales in the Southeastern Sichuan Basin in China3
NOx Formation Characteristics for Cocombustion of Rice Husk and Coal at High Temperature3
Enhancing Air-Breathing Direct Methanol Fuel-Cell Performance by Optimizing Anode Flow-Channel Widths and Open Ratios of Cathode Current Collectors3
Optimizing Shale Gas Equipment Deployment Based on Pressure Distribution3
Combustion and Emission in a Common Rail Diesel Engine Fueled by Diesel, Palm Oil, Gasoline, and Ethanol Blends under Double-Injection Strategy3
Machine Learning–Based Fault Detection and Diagnosis of Organic Rankine Cycle System for Waste-Heat Recovery3
Density Prediction Model of Binary or Ternary Diesel Fuel Blends with Biodiesel and Ethanol for Compression-Ignition Engine Calculations3
Differences of the Pore Structure and Methane Adsorption/Desorption between Vitrain and Durain of Low-Rank Coals: Case Study in the Huanglong Coalfield, Southern Ordos Basin, China3
Simulation Calculation and Analysis of Connate Water Convection on Steam Chamber Expansion in Steam-Assisted Gravity-Drainage Process3
Optimal Hourly Scheduling for Wind–Hydropower Systems with Integrated Pumped-Storage Technology2
Optical and Numerical Study on Micropilot Diesel Fuel-Ignited Methane Combustion Process under Different Diesel Fuel Injection Strategies2
Ethanol, Hemp, and Cottonseed Oil Biofuel Injection Completely Eliminates Diesel Fuel in Reactivity-Controlled Compression Ignition Engine2
Experimental and Theoretical Analysis of Spray Characteristics of Biodiesel Blends with Diethyl Carbonate in a Common-Rail Injection System2
Dynamic Multiobjective Optimal Dispatch of Distribution Network Considering Time of Use–Based Demand Response2
Numerical Investigation on Cofiring Characteristics of Biomass Syngas and Coal in a 660-MW Tower Boiler2
Flame Structure and Soot-Precursor Formation of Coflow n-Heptane Diffusion Flame Burning in O2/N2 and O2/CO2 Atmosphere2
Impact of Brine on Disjoining Pressure and Rock Wettability of Oil, Brine, and Mineral Systems2
Design of Primary Optical Element with Multiple Sublenses to Improve Irradiance Uniformity over the Receiver of Concentrator Photovoltaic System2
Production Characteristics and Importance of Uncertain Parameters of Water Huff-n-Puff for Volume Stimulation Horizontal Wells in Tight Oil Reservoirs2
Ignition and Combustion Characteristics of Al/n-Heptane Nanoslurry Fuel Droplets via a Laser-Ignition Model2
Effects of Exhaust Gas Recirculation under Fueling Rate or Air/Fuel Ratio–Controlled Strategies on Diesel Engine Performance and Emissions by Two-Zone Combustion Modeling2
Experimental Inspection of the Influence of Chemical Osmosis on Shale Swelling and Subsequent Wellbore Stability2
Study of Fuel Injection Strategy for a Methanol and Diesel Dual-Fuel Large-Bore and Medium-Speed Marine Engine2
Numerical Investigation of the Aerodynamic Droplet Breakup at Mach Numbers Greater Than 12
Reviewers2
Joint Planning of a Distribution System and a Charging Network for Electric Vehicles2
Inexact Credibility-Constrained Programming Approach for Electricity Planning in Ontario, Canada2
Influence of Facade Structure, Glazing Type, and Window-to-Wall Ratio on the Energy Performance of a Detached Residential Building with a Sunspace2
Simulation of the Effect of Novel Porous Channels and Their Optimizations on the Performance of Direct Ethanol Fuel Cells2
Experimental Study of Deformation Risk and Interpolation Analysis of Temperature for Water Walls under Flexible Low-Load Conditions2
An Analytical 2D Formulation for the Combined Cooling of PCM-Covered Cylindrical Battery Cells2
Pore-Throat Structure in the Chang 7 Subformation Influencing the Differential Accumulation of Tight Sandstone Oil: Insight from SEM, Rate-Controlled Mercury, and High-Pressure Mercury Results2
Retracted: CO2 Sequestration and Enhanced Shale Gas Recovery by CO2 Injection: Numerical Simulation Method2
Experimental Study on the Droplet Transport and Dynamic Behavior in Flow Channel with Microprotrusions of PEMFC2
Comparison Study of the Working Performance and Thermal Stress of Different Types of Photovoltaic and Thermal Solar Collectors2
Multiobjective Optimization of a Parallel Liquid Cooling Thermal Management System for Prismatic Batteries2
Thermal Analysis of a Generic Earth-to-Air Heat Exchanger Coupled with a Room during the Summer Season in a Desert Climate2
Identifications of Complex Fracture Geometry and Changing Drainage Radius in Tight Gas Reservoirs2
Research on PEMFC Internal Temperature Predictions and Thermal Management Strategy Based on a Kalman Algorithm2
An Investigation of Emulsified Heavy Fuel Oil with High Water Content Applied to a High-Speed Diesel Engine2
A Fully Coupled Thermomechanical Analysis of Lithium-Ion Batteries with Total Heat Generation Rate2
Synergistic Effect of Mixing Ethylene with Propane on the Morphology and Nanostructure of Soot in Laminar Coflow Diffusion Flames2
Enhancement of Coalbed Methane via Nitrogen Injection in a Coal Mining Area: A Laboratory and Field Study2
Phase-Field Modeling of Dendrite Growth in Lithium Electrodeposition Process in Lithium Metal Batteries2
Reviewers2
On the Impact of Temperature on Shale Swelling and Expansion: A Diffuse Double-Layer Perspective2
Analysis of Solar Chimney Application for Building Heating and Cooling in Different Climates in China2
0.087470769882202