OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Engineering Mechanics is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)

Article	Citations
The Effect of Prior Parameters in a Bayesian Approach to Inferring Material Properties from Experimental Measurements	61
Noncoaxial Behavior of Granular Materials under Principal Stress Rotation: Insights from Stress Probing Analysis	52
Multisurface Plasticity for Concrete Subjected to Fire: A Spectral Decomposition–Based Approach	48
Experimental and Theoretical Study on Nonlinear Behavior of Compression-Mode Viscoelastic Dampers under Different Excitations and Temperatures	46
A Model for Coupled Fluid Velocity and Suspended Sediment Concentration in an Unsteady Stratified Turbulent Flow through an Open Channel	44
Calibration of the Statistical-Interference Factors for the Design of Tempered Structural Glass	37
A Numerical Study on the Multiphase Newtonian and Non-Newtonian Displacement in a Porous Micromodel via Water–Surfactant–Polymer Flooding	34
LIGO Newtonian Noise Cancellation Using Metamaterial-Based Periodic Structures	31
A Probabilistic Crowd–AI Framework for Reducing Uncertainty in Postdisaster Building Damage Assessment	31
Nanomechanics of ASR Gels from Coarse-Grained Simulations	28
Dynamic Torsional Vibration of a Pipe Pile in Radial Heterogeneous Transversely Isotropic Saturated Soil	27
Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction	22
Developing a New Understanding of the Impulse Response Test for Defect Detection in Concrete Plates	22
Study on the Mechanism of Tunnel Subhorizontal Jet Grouting Reinforcement Based on a Shell Model on Two-Parameter Foundation	21
A State-Space Method for Vibration of Double-Beam Systems with Variable Cross Sections	20
Isogeometric Analysis for Nonlocal Vibration Characteristics of BFGP Curved Nanobeams with Variable Nonlocal Parameters	20
Comparison of Constrained Unscented and Cubature Kalman Filters for Nonlinear System Parameter Identification	20
Laplace- and Frequency-Domain Methods on Computing Transient Responses of Oscillators with Hysteretic Dampings to Deterministic Loading	17
Functionally Graded Beams as Surrogate Structural Models: Shear Beam with Exponentially Graded Rigidity	16
Probabilistic Comparative Analysis of Vehicle–Bridge Interaction Models for Predicting Bridge Response under Moving Vehicles	15
An Explicit Solution of Modal-Damping Ratios for Higher Modes of a Cable with an External Damper	15
Analysis of the Connection between Aerodynamic Force, Deformation, Flow, and Structure of Wind Turbine Blades Using Dynamic Mode Decomposition	15
Unified Modeling of Interface between Structured Clay or Crushable Sand and Structure	15
A Critical Evaluation of Some Constitutive Models for Finite-Element Simulation of Structural Steel Components	15
Theoretical Models for the Borehole Pressure of Air-Decoupled Charge with Discontinuous Interface Conditions	14

Discrete Fresh Concrete Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete Flow	14
Exploiting DEM to Link Thermal Conduction and Elastic Stiffness in Granular Materials	14
Fractional Viscoelastic Models for Asphalt Concrete: From Parameter Identification to Pavement Mechanics Analysis	14
Largest Experimental Investigation on Size Effect of Concrete Notched Beams	13
Using the Impulse–Response Pile Data for Soil Characterization	13
Acoustic-Structural Analysis of Lightweight FG Porous Composite Cylindrical Shells Reinforced with Agglomerated Graphene Nanoplatelets on Viscoelastic Foundations under Subsonic Flow	13
Novel Framework for Solving the Two-Dimensional Consolidation Problem Using the Random Feynman–Kac Formulation	13
2023 EMI Conference Student Competition Finalist Papers	13
Size Effect on Mode I Fracture Resistance of Polymeric Rounded-Tip V-Notched Specimens Using the Modified Point Stress Criterion	13
Stability Conditions for General Tensegrity with Rigid Bodies	13
Scaled Spherical Simplex Filter and State-Space Damage-Plasticity Finite-Element Model for Computationally Efficient System Identification	13
Improved Singum Model Based on Finite Deformation of Crystals with the Thermodynamic Equation of State	12
Graphical Methodology for Structural Analysis of Historical Constructions by Combined Use of Funicular and Projective Geometry	12
Free Vibration and Buckling Analysis of Axially Loaded Double-Beam Systems with Generalized Boundary Conditions	12
Nonlinear Electro-Thermo-Torsional Buckling Analysis of Stiffened Functionally Graded Graphene-Reinforced Composite Laminated Toroidal Shell Segments	12
Uncertainty Quantification and Error Propagation Principle of Structural Flexibility with Time-Varying Dynamic Properties	12
Numerical Investigation of the Multiscale Characteristics of Elastoplasticity in Microheterogeneous Continuum Media Using a Simple Hollow Sphere Model	12
Dynamics of Sand–Water Coaxial Jets in Stagnant Water	12
Evaluation of Fastening Modeling Approaches for Dynamic Assessment of Rail Based on Finite-Element Method	11
Stress Concentration of a Microvoid Embedded in a Bilayered Material Considering the Boundary Effects	11
Stochastic Response Analysis of a Spar-Type FOWT Subjected to Extreme Waves by a Novel Filter Wave Model and the DR-PDEE	11
Time–Frequency Buffeting Responses of Transmission Lines Excited by Two-Dimensional Turbulent Wind: Closed-Form Solution	11
Adaptive Bayesian Inference Framework for Joint Model and Noise Identification	11
Efficient Multilayered Shell Model and Its Application in Large Reinforced Concrete Structures	11
Exact Winkler Solution for Laterally Loaded Piles in Inhomogeneous Soil	10
Effect of Opening Size in Unreinforced Masonry Walls Subjected to Lateral Loads: Computational Modeling and Code Comparison	10
A Hierarchical Bayesian Similarity Measure for Geotechnical Site Retrieval	10
Three-Dimensional Mesomechanical Complex Modulus Prediction for Asphalt Mortar Considering Conjunctive Shell Mechanism of Interface Transition Zones and Properties of Coarse Mastic	10
Free Vibration of Cracked MEE FG Plates Resting on Elastic Foundations Using Phase-Field Simulation	10
Energy-Based Error Bound of Physics-Informed Neural Network Solutions in Elasticity	10
A Wiener Path Integral Formalism for Treating Nonlinear Systems with Non-Markovian Response Processes	10
Cyclic Response of Buckling-Restrained Stainless Steel Energy Dissipating Bars. I: Experimental Investigations	10
Characteristics of Peak Load on a Borehole Wall in Water-Coupling Blasting	9
Evaluation of Cross-Sectional Deformation in Pipes Using Reflection of Fundamental Guided-Waves	9
Improved Approximation Approach for Folding Analyses of Structures with Kinematic Indeterminacy	9
Elastoplastic Modeling for Crushable Sands over a Large Stress Range Based on the Particle Rearranging and Crushing State	9
Reviewers	9
Investigation of Epoxy Resin under Uniaxial, Biaxial, and Triaxial Quasi-Static Loads	9
Corrosion-Fatigue Analysis of Wires in Bridge Cables Considering Time-Dependent Electrochemical Corrosion Process	9
Dislocation Emission Model of Kinked Cracks in Aluminum Crystal under the Condition of Hydrogen Filling	9
Convergence and Optimal Parameters of the Inertial Relaxed Lattice Boltzmann Method in Fluid and Solid Simulations	9
Fabric Investigation of Natural Sensitive Clay from 3D Nano- and Microtomography Data	9
Physio-Mechanical Characterization of Limestone and Dolomite for Its Application in Blast Analysis of Tunnels	9
Double Scalar Variables Plastic-Damage Model for Concrete	8
Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy	8
An Improved Wave Velocity Model for Acoustic Emission Source Localization in Heterogeneous Rock Materials with Unknown Inclusions	8
Elastic Bifurcation, Postbuckling Behavior, and Collapse of Thin-Walled Regular Polygonal Columns	8
Expression of Concern for “Discrete Fresh Concrete Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete Flow” by Elham Ramyar and Gianluca Cusatis	8
Explicit Interval Frequency Response of Multiply Cracked Frames with Uncertain-but-Bounded Damage under Stochastic Seismic Excitation	8
Closure to “Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method” by Yixun Sun, Philippe Causse, Brahim Benmokrane, and François Trochu	8

Numerical Simulations of Particle Behavior and Crushing within a Pressurized Sand Damper Subjected to Cyclic Loading	8
Nonlinear Dynamics of a Broadband Vortex-Induced Vibration–Based Energy Harvester	8
Reviewers	8
Universal Runge–Kutta Neural Oscillator for Stochastic Response Analysis of Nonlinear Dynamic Systems under Random Loads	8
Finite Linear Representation of Nonlinear Structural Dynamics Using Phase Space Embedding Coordinate	8
Multiscale Finite-Element Analysis of Damage Behavior of Curved Ramp Bridge Deck Pavement Considering Tire–Bridge Interaction Effect	8
Design and Analysis of a Bionic Climbing Robot with Variable Degrees of Freedom	8
Bayesian Nonlocal Operator Regression: A Data-Driven Learning Framework of Nonlocal Models with Uncertainty Quantification	8
Vlasov–Leont’ev Foundation Model for the Dynamic Analysis of a Laterally Loaded Pile in Homogeneous Viscoelastic Soil	8
Adaptive Risk-Based Life-Cycle Management for Large-Scale Structures Using Deep Reinforcement Learning and Surrogate Modeling	8
An Experimental Investigation for Detection, Localization, and Quantification of Compound Changes in Complex Uncertain Systems	8
Sensitivity and Efficiency Analyses of Two Wood Cell Wall Structural Models	7
A Complex Variable Solution for Shallow Rectangular Tunnel in Semi-Infinite Plane	7
Applying a 3D Re-Entrant Auxetic Cellular Core to a Graphene Nanoplatelet–Reinforced Doubly Curved Structure: A Sound Transmission Loss Study	7
Analysis of a Celestial Icosahedron	7
Crack-Parallel Stress Effect on Fracture of Fiber-Reinforced Concrete Revealed by Gap Tests	7
Size Effect on Strength Statistics of Prenotched Quasibrittle Structures	7
Crashworthiness of Multicellular Tubes under Axial Compression Based on Polygonal Origami Folding	7
Generalized Stratified Sampling for Efficient Reliability Assessment of Structures against Natural Hazards	7
Regularized Density-Driven Damage Mechanics Model for Failure Analysis of Cementitious Composites	7
Modeling Rate-Dependent Shearing in Crushable Sand with a Pseudoviscous Kinetic Energy Potential	7
Mechanism of Elastic–Plastic Crack Initiation in Unsaturated Rock Cracks under Gas–Ice Pressure at Low Temperatures	7
Shape Reconstruction Method for Monitoring Large Deformed Beam Structures	7
Analysis of SH Wave Reflection and Refraction at a Viscoelastic Membrane Interface	7
A Dynamic Constitutive Model for Rock Materials Subjected to Medium- and Low-Strain-Rate Dynamic Cyclic Loading	7
Response Control of SDOF System with Inerter-Assisted Tuned Liquid Sloshing Damper	7
Applications of Space–Time Elements	7
Multiobjective Optimization of a Single Slotted Flap Using Artificial Neural Network and Metaheuristic Algorithms	6
Level-Set and Learn: Convolutional Neural Network for Classification of Elements to Identify an Arbitrary Number of Voids in a 2D Solid Using Elastic Waves	6
Parameter Estimation of Stochastic Fractional Dynamic Systems Using Nonlinear Bayesian Filtering System Identification Methods	6
Minkowski Sum–Enhanced 3D Mesoscale Structure Model for Concrete with High Aggregate Volume Fractions	6
Aging Epidemiology: A Hereditary Mechanics–Inspired Approach to COVID-19 Fatality Rates	6
Data-Driven Design of Thermoplastic Composites with Tailored Compliance	6
Micromechanical Investigation of Particle-Size Effect of Granular Materials in Biaxial Test with the Role of Particle Breakage	6
Layout Optimization of Vertical-Axis Wind Turbines Based on a Power-Predicting Neural Network	6
Response Spectrum Method for Rapid Acoustic Fatigue Assessment by Improving the Nomograph	6
Noninvasive Methods to Estimate the Mass Eccentricity of Steel-Cored Elastomeric Spheres for Seismic Isolation	6
Analytical Solution for Consolidation of Composite Column–Reinforced Ground in Unsaturated Soils Including Smear Effect and Time-Varying Loading	6
Quartic Wiener Path Integral Approximation for Stochastic Response Determination of Nonlinear Systems	6
Mechanism of Grain and Twin Nanoboundaries Making Strength and Wear Resistance Different in CoCrFeNiCu: A Molecular Dynamics Study	6
A Multilevel Adaptive Mesh Scheme for Efficient Simulation of Thermomechanical Phase-Field Fracture	6
A 3D Coupled Finite-Element Model for Simulating Mechanical Regain in Self-Healing Cementitious Materials	6
Modified Analytical Solutions for Purely Elastic Stress and Approximation of the Plastic Zone in Deep-Buried Circular Roadways	6
Real-Time Shape Sensing of Composite and Sandwich Structures by Coupling Inverse Finite-Element Method with Refined Zigzag Theory	6
Atomistic-Informed and Machine Learning–Assisted Crystal Plasticity Modeling for Material Interfaces	6
Buckling Behavior of Corroded Four-Sided Simply Supported Plates with Longitudinal Stress Gradients	5
Noncontact Dynamic Three-Component Displacement Measurement with a Dual Stereovision–Enabled Uncrewed Aerial System	5
Direct Simulation Methods for a Class of Normal and Lognormal Random Fields with Applications in Modeling Material Properties	5
Stability of Segmented Circular Arch under Constant Pressure	5
Advancing Understanding of the Influence of Drained Cyclic Loading on Sand Behavior Using DEM	5
Reviewers	5
Nonlinear Electromagnetic Energy Harvester–Structure System under Seismic Excitation: Vibration Mitigation and Energy Scavenging	5
Method and Theory for Conversion of Distributed Fiber-Optic Strains to Crack Opening Displacements	5
Stochastic Mainshock–Aftershock Simulation and Its Applications in Dynamic Reliability of Structural Systems via DPIM	5
Unified Damage Constitutive Model for Fiber-Reinforced Concrete at High Temperature	5
The GCO Method for Time-Dependent Structural Reliability Assessment	5
Erratum for “Discrete Fresh Concrete Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete Flow” by Elham Ramyar and Gianluca Cusatis	5
Application of q-HATM over Fractional in Time Model for Advection-Dispersion Equation with Variable Migration Parameters	5
A Stochastic Approach to Solve the Consolidation Problem through the Feynman–Kac Formulation	5
Nonlinear Partial Differential Equation for Unsteady Vertical Distribution of Suspended Sediments in Open Channel Flows: Effects of Hindered Settling and Concentration-Dependent Mixing Length	5
Rigid-Block DEM Modeling of Mesoscale Fracture Behavior of Concrete with Random Aggregates	5
Effect of Time-Dependent Bond Slip on Delayed Failure of Reinforced Concrete Frames	5
Aeroelastic Real-Time Hybrid Simulation. I: Validation	5
Analysis of Wave Motion and Deformation in a Nonlocal Micropolar Poro-Thermoelastic Plate with Three Memory-Dependent Theories	5