Advances in Polymer Technology

Papers
(The median citation count of Advances in Polymer Technology is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Intrinsically Noncombustible Thermosets from Sulfur-Containing Epoxy Resin and Benzoxazines: Evaluation of Thermal and Mechanical Properties71
Self-Healing Polymers Designed for Underwater Applications54
Vibration Characteristics of Shear Thickening Fluid-Based Sandwich Structures50
Ethylene Polymerization through Neutral Nickel Complexes Bearing Cyclic Imides42
Zeolite‐Based Anti‐corrosion Pigments for Polymer Coatings: A Brief Review41
Assessing Surface Topographies of 3D‐Printed Polymer Tooling: Implications for Enhanced Injection Moulding Performance38
Flexural and Impact Properties of Recycled High‐Density Polyethylene (rHDPE) Composites Reinforced With Hybrid Jute and Banana Fibers31
Correction to “Production and Application of Polymer Foams Employing Supercritical Carbon Dioxide”31
Tailoring the Curing Kinetics of NBR-Based Rubber Compounds for Additive Manufacturing of Rod Seals29
Effect of Online Plasma Treatment on Fiber Surfaces and Mechanical Properties of Continuous Basalt Fiber‐Reinforced Polypropylene Composites26
Water Absorption Behavior of Teff (Eragrostis tef) Straw Fiber-Reinforced Epoxy Composite: RSM-Based Statistical Modeling and Kinetic Analysis25
Macromolecular Poly(N‐isopropylacrylamide) (PNIPAM) in Cancer Treatment and Beyond25
Synthesis, Evaluation, and Electrochemical Detection Application of Magnetic Molecularly Imprinted Polymers for 4,4 24
Low Temperature, In Situ Polymerization of Vinyl Acetate in Silica Containing Emulsion Gels23
Effect of Curing Temperature and Time on Mechanical Properties of Vinyl Polymer Material for Sealing Applications in Industry Using Machine Learning Techniques23
Synthesis of Hydrogel Based on Poly (Acrylic Acid–Co‐Vinyl Acetate) Grafted on Modified Recycled Cellulose for Use in Fertilizer Slow‐Release System20
Production and Application of Polymer Foams Employing Supercritical Carbon Dioxide20
Structure–Activity Relationship and Stimuli-Responsiveness Behavior of Metallosupramolecular Polymers19
Permanent Deformation of Thermoplastic Polyurethane in the Solid‐State Rolling Process18
Nanocellulose‐Incorporated Composite Membranes of PEO‐Based Rubbery Polymers for Carbon Dioxide Capture17
Design and Application of Flexible Sensors in Human–Machine Interaction17
Effects of Prepolymerization, Temperature, and Hydrogen Concentration on Kinetics of Propylene Bulk Polymerization Using a Commercial Ziegler-Natta Catalyst17
RETRACTION: Examine the Mechanical Properties of Aluminium Tetrahydride/Calotropis gigantea Based Hybrid Polyester Composites in Cryogenic Atmosphere16
Monte Carlo Simulation of Static and Dynamic Properties of Linear Polymer in a Crowded Environment16
Improving the Physical Properties of Nanofibers Prepared by Electrospinning from Polyvinyl Chloride and Polyacrylonitrile at Low Concentrations13
Polymer Processing under Microwaves13
Well-Distributed Polysilsesquioxane-Modified Carbon Nanotubes for Thermal Conductive Insulating Silicone Rubbers12
Preparation of High‐Temperature‐Resistant Polybenzoxazole Paper by a Two‐Step Method12
Cellulose Nanomaterials as Reinforcing Agents for Bio‐Based Leather‐Like Polymeric Composites: A Review12
PVP‐Nanomaterial Hybrid Systems: Recent Advances for Efficient Dye Adsorption12
Incorporation of Capecitabine Into Extended Chain of N‐Acylated Chitosan Carrier11
Enhanced Thermal Stability and Tailored Morphology of Poly(Aniline‐Co‐Pyrrole)/Montmorillonite‐H + Nanocomposites via In Situ Oxidative Polymerizatio11
Antibacterial Effect of Copper Oxide Nanoparticles on Polyvinyl Chloride‐Based Polymer Nanocomposite10
Amino Acids Used as a Potential Alternative to Commercially Used Allergenic Sulfur Elastomer Vulcanization Accelerators10
The Synergy of Nanosilica and Zinc Diethyl Hypophosphite Influences the Flame Retardancy and Foaming Performance of Poly(Ethylene Terephthalate)10
Recycled Plastics Utilization in Packaging Converting Processes: A Semi‐Systematic Review10
Analysis of the Multiwalled Carbon Nanotubes Reinforced Polymethyl Methacrylate Bone Cement’s Characteristics and In Vitro Bioactivity to Prolong Its Functionality in Orthopedic Application9
Equibiaxial Planar Tension Test Method and the Simulation Analysis for Hyperelastic EAP Membrane9
Fused Deposition Modeling of Single-Use Plastic Alloy9
Comparative Study of Polymer Composites with Cellulose Microfibers from Different Plant Resources9
Synergistic Effects of Low‐Loading Cellulose Nanocrystals on the Mechanical, Morphological, Thermal, and Structural Properties of Epoxy Resins9
Investigation on Mechanical and Thermal Properties of a Kenaf/Jute Fiber-Reinforced Polyester Hybrid Biocomposite9
Novel Approaches for Encapsulation of Plant Probiotic Bacteria with Sustainable Polymer Gums: Application in the Management of Pests and Diseases9
Effect of Core Structure on Cut Resistance of Covered Yarn Fabrics8
Mechanical and Morphological Properties of Uniaxially Oriented and Heat‐Treated Poly(Lactic Acid)/Poly(Butylene Adipate‐Co‐Terephthalate) Blends8
A Review of Polymer Laser Sintering and Fused Deposition Modelling of Polymers8
Brewer’s Spent Grains as Alternative Ligno‐Cellulosic Filler for the Preparation of Bio‐Based Polymer Composites8
Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber-Reinforced Polymer Hybrid Nanocomposites or Automotive Applications8
Selective TREF Fraction Removal: A Method to Enhance Crystallinity and Microhardness in Propylene–1‐Pentene Copolymers7
Recent Progress in Stimuli-Responsive Hydrogels Application for Bone Regeneration7
Transforming Polycotton Textile Waste into New Bicomponent Fibers: An Investigative Study7
Dynamic Mechanical Analysis of Banyan/Ramie Fibers Reinforced with Nanoparticle Hybrid Polymer Composite7
Computational Analysis and Optimization of Polymer‐Based Ankle‐Foot Orthoses7
Thermo-Responsive Shape Memory Thermoplastic Elastomer Based on Natural Rubber and Ethylene Octene Copolymer Blends7
Dimensional Stability and Weight Change of Orthodontic Clear Aligners Exposed to Hot and Cold Beverages: An In Vitro Study6
Fabrication of Graphene Oxide Reinforced Biocomposite: Recycling of Postconsumed Footwear Leather6
Model to Predict Polymer Fibre Diameter during Melt Spinning6
Effect of Nanoclay Filler on Fatigue Life of Natural Rubber/Styrene-Butadiene Blend6
Bitumen-Biopolymer Materials Modified with Polylactic Acid with Improved Physical and Chemical Properties6
Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure6
Bridging Plant Biotechnology and Additive Manufacturing: A Multicriteria Decision Approach for Biopolymer Development6
Structural and Compositional Characteristics of Technical Lignin Derived From Non‐Wood Biomass: Bagasse and Kash6
Performance Study and Formulation Optimization of Rapid‐Curing Local Insulating Spray Coating Materials6
Study on the Stress–Strain Relationships and Deterioration Modes of HTPB Propellant with Prefabricated Cracks6
Microstructure Development and Its Effect on the Properties of Melt‐Processed Biodegradable Polylactide/Poly(ε‐Caprolactone) Blends6
Modified Bitumen Materials from Kazakhstani Oilfield5
High Humidity Mechanical Properties of Film Forming Polymers for Personal Care Applications5
Optimization of Material Extrusion Parameters for Biodegradable PLA–Silicon Bone Scaffolds: A Pathway to Scalable Manufacturing5
Hydrogel-Crosslinked Microneedles Based on Microwave-Assisted Drying Method5
Removal of Dye from Wastewater Using a Novel Composite Film Incorporating Nanocellulose5
Investigation of the Properties of Gap‐Filling Materials Enhanced With Nanofillers5
Tuning Mechanical Properties of Polymeric Hydrogels Using Orthogonally Functionalized Crosslinkers5
Effect of Silane‐to‐Silica Ratio on Dissipative Properties of SSBR Compound Reinforced by Dual Fillers of Silica and Carbon Black: Experimental Investigation and Mathematical Modeling5
Design, Fabrication, and Characterization of 3D-Printed Multiphase Scaffolds Based on Triply Periodic Minimal Surfaces5
Characterization of Menthol‐Loaded Electrospun Nanofibrous Membranes and the Temperature‐Controlled Release Properties4
Manufacturing of Filament for 4D Printing through Polyether-Type TPU/PLA Blend4
Biodegradable Composite of Gelatin Blend Microcrystalline Cellulose for Cd2+, Pb2+, and Cr3+ Adsorption from an Aqueous Solution4
Eco‐Friendly Synthesis of Flower‐Wrinkle Silica Nanoparticles From Rice Husk4
The Properties of Tannery Waste Addition as a Filler Based on Two Types of Polymer Matrices: Poly(Butylene Adipate-Co-Terephthalate) (PBAT) and Poly(Butylene Succinate) (PBS)4
Polymer–Lipid Hybrid Nanosystems: An Emerging Advanced Therapeutic Tool4
Isosorbide-Based Thermoplastic Polyurethane with Different Polyols and Soft/Hard Ratios4
Carboxymethyl Cellulose (CMC)‐Reinforced Polyvinyl Alcohol (PVA) Fibrillar Composite Membranes: Production by Centrifugal Spinning and Characterization4
Preparation and Properties of Boron Nitride or Aluminum Nitride Reinforced Glass Fiber/Modified Polyphenylene Sulfide Composites4
Influence of Carbon Dioxide on the Glass Transition of Styrenic and Vinyl Pyridine Polymers: Comparison of Calorimetric, Creep, and Rheological Experiments4
Physical, Mechanical and Thermal Properties of an Epoxy Composite Reinforced With Nauclea diderrichii (Bilinga) Wood Particles4
Analysis and Optimization of Thermoplastic Polyurethane Infill Patterns for Additive Manufacturing in Pipeline Applications4
Direct Evidence of π–π Interactions in Transparent Organic–Inorganic Polymer Hybrids of Polystyrene and Silica Gel4
Piezoelectric Nanofiber Mats With Enhanced Elastic Recovery for Smart Fabrics3
Comparative Characterization of Carica papaya Fibers Extracted by Retting and Alkaline Treatment for Biocomposites3
Preparation and Property Study of PA56/POE-g-MAH-GMA/PPO Ternary Alloy3
A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques3
Optimization of Mechanical Properties in Biomedical‐Grade Polylactic Acid (PLA) Components Fabricated Via Fuzed Filament Fabrication (FFF)3
Green Biocomposites From Agro‐Waste With Central Layer Architecture: A Performance Comparison Against Glass Fiber Composite3
Nonisothermal Crystallization Kinetic of LLDPE/Diatomite/Graphene Nanocomposites Using an Isoconversional Approach3
Challenges and Opportunities in Additive Manufacturing Polymer Technology: A Review Based on Optimization Perspective3
Performance of Plastic Waste-Based Polyionic Liquid toward the Dehydration of Crude Oil Emulsions3
From Bench to Clinic: Crosslinking Approaches for Next‐Generation Collagen Fillers3
Cellulose Microfiber‐Reinforced Styrene–Ethylene–Butylene–Styrene Composites: Structure, Properties, and Interfacial Interactions Mediated by Ethylene Vinyl Alcohol Compatibilizer3
Insights into Factors Influencing Thermoplastic Elastomer (TPE) Foam Production and the Role of Induced Crystallization3
Development of Chitosan: PVA/PEG Polymer Blends for Skin Graft Applications3
Investigation of Curing Mechanism and Mechanical Properties of Polypropylene/Aliphatic Epoxy Composites3
Degradation of Poly(3‐Hydroxybutyrate) by Potassium Phosphate3
Prediction of a Broad Spectra of Membrane Morphologies Through a New NIPS Thermo‐Kinetic Model3
Pullulan‐Based Films: Unveiling Its Multifaceted Versatility for Sustainability3
Effect of Keratin Waste on Poly(ε-Caprolactone) Films: Structural Characterization, Thermal Properties, and Keratinocytes Viability and Proliferation Studies3
Mechanical Properties of Ramie/Hemp Hybrid Composites Influenced by Stacking Arrangement and NaOH Treatment3
Utilizing Additive Manufacturing for Fabricating Energy Storage Components From Graphene‐Reinforced Thermoplastic Composites3
Fabrication and Characterization of Polyvinyl Alcohol‐Jute Cellulose Nanocrystals Composite Films for Packaging Application3
Enhancing Mechanical and Thermal Properties of Epoxy Composites with Fish Scale‐Derived Collagen Reinforcement2
Alginate–Carboxymethylcellulose Composite Membranes for Wound Dressing: A Dual Antimicrobial Strategy Using Natamycin and Tetracycline2
Synthesis and Properties of Moisture‐Crosslinkable Poly(Urethane‐Urea) With Intrinsic Flame Retardancy2
Thin-Film Nanocomposite Reverse Osmosis Membrane with High Flux and Antifouling Performance via Incorporating Maleic Anhydride-Grafted Graphene Oxide2
A Modified Hydrolysis Method of Decolorizing Reactive-Dyed Polycotton Waste Fabric and Extraction of Terephthalic Acid: A Perspective to Reduce Textile Solid Waste2
Solution Uptake in Cylindrical Carbon-Fibre-Reinforced Polymer (CFRP) Tendons2
Effect of Process Parameters and Material Selection on the Quality of 3D Printed Products by Fused Deposition Modeling (FDM): A Review2
Study and Analysis of the Effects of Increasing Carbon Fiber Layers on the Physical and Creep Characterization Used for Lower Limb Prosthetic Socket Laminations2
Polymer Strength Prediction Model Based on Dielectric Constant2
Influence of Drilling Parameters on the Delamination and Surface Roughness of Insulative-Coated Glass/Carbon-Hybrid Composite2
Simulation Method for Rubber Compounding under Isothermal Partial Filling Conditions2
Measurement Techniques and Methods for the Pressure Coefficient of Viscosity of Polymer Melts2
PLGA‐PEG‐PLGA Polymer: From Synthesis to Advanced Pharmaceutical Applications2
Obtaining Dialdehyde Carboxymethylcellulose Through Microwave Treatment2
Durable Flame-Retardant Cotton Fabric Modified by a Novel Reactive P-N Intumescent Flame Retardant2
2
Synergistically Improving Mechanical and Interfacial Properties of Epoxy Resin and CFRP Composites by Introducing Graphene Oxide2
Study on Ring-Opening Copolymerization of Trioxymethylene and Second Monomer Initiated by Phosphotungstic Acid2
2
Bio-Based Disposable Containers for Food Services2
Effect on Compression Molding Parameters in Mechanical Properties of MWCNT/Glass Fiber/Epoxy Composites2
Fabrication and Characterization of Partial Bio-nano-silica Inclusion in Fibre-Reinforced Concrete for High-performance Applications2
Examine the Mechanical Properties of Aluminium Tetrahydride/Calotropis gigantea Based Hybrid Polyester Composites in Cryogenic Atmosphere2
Effectiveness of Fish Scale‐Derived Collagen as an Alternative Filler Material in the Fabrication of Polyurethane Foam Composites2
Investigation on Reinforcement Effects of Nanocellulose on the Mechanical Properties, Water Absorption Capacity, Biodegradability, Optical Properties, and Thermal Stability of a Polyvinyl Alcohol Nano2
Design of Highly Porous Materials Based on Chitosan/Pectin Interpolyelectrolyte Complex for Wound Healing Application2
Modification of Tyre Rubber Crumb with Wastes of Plant Oil Production2
0.046191930770874