OOIR: Observatory of International Research

Papers

(The TQCC of Maderas-Ciencia y Tecnologia is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)

Article	Citations
Comparative study on weathering durability property of phenol formaldehyde resin modified sweetgum and southern pine specimens	15
Effects of microcrystalline cellulose on some performance properties of chitosan aerogels	14
Prediction of surface roughness of CO2 laser modified poplar wood via response surface methodology	13
Properties of thermally modified teakwood	13
Mechanical and acoustic characteristics of four wood species subjected to bending load	9
Flooring characteristics of thermo-mechanical densified wood from three hardwood tropical species in Costa Rica	7
Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production	7
Changes in the content and composition of the extractives in thermally modified tropical hardwoods	6
Influence of initial wood moisture on decay process by two brown-rot fungi	6
Quantitative evaluation of microwave irradiation on short-rotation plantation wood species	6
Shear and adhesion strength of open and closed system heat-treated wood samples	5
Estimation of density, moisture content and strength properties of Tectona grandis wood using Near Infrared Spectroscopy	5
Assessment of cellulose nanofibers from bolaina blanca wood obtained at three shaft heights	5
Combined effects of neem (Azadirachta indica) and sesame (Sesamum indicum) oil as a wood preservative on subterranean termites in the field	5
Optimization of CNC operating parameters to minimize surface roughness of Pinus sylvestris using integrated artificial neural network and genetic algorithm	5
Mechanical and fire properties of oriental beech impregnated with fire-retardants and coated with polyurea/polyurethane hybrid and epoxy resins	5
Plywoods of northeast Argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values	5
Changes in wood properties of chestnut wood structural elements with natural aging	5
Crystallinity and impact strength improvement of wood-polylactic acid biocomposites produced by rotational and compression molding	4
Evaluation of the properties of hybrid yellow poplar (Liriodendron sino-americanum): A comparison study with yellow poplar (Liriodendron tulipifera)	4
Deep eutectic solvent pulping from sorghum stalks	4
Effect of borax-boric acid and ammonium polyphosphate on flame retardancy of natural fiber polyethylene composites	4
Energy gains of Eucalyptus by torrefaction process	4
Characterizations of tree-decay fungi by molecular and morphological investigationsin aniranian alamdardeh forest	4
Juvenile-mature wood evaluation along the bole considering the influence of silvicultural treatments	4

Evaluation of wood-based coating performance for ultraviolet roller and conventional air-atomization processes	3
Automatic identification of charcoal origin based on deep learning	3
Elastic constants of Chilean Pinus radiata using ultrasound	3
Determination of processing characteristics of wood materials densified by compressing	3
Biologically synthesised copper oxide and zinc oxide nanoparticle formulation as an environmentally friendly wood protectant for the management of wood borer, Lyctus africanus	3
Experimental study on full-scale glulam beams manufactured with Eucalyptus urograndis	3
Characterization of nanocellulose/pyrolysis oil nanocomposite films	3
An evaluation of clove (Eugenia caryophyllata) essential oil as a potential alternative antifungal wood protection system for cultural heritage conservation	3
Structural analyses of wooden chairs by finite element method (FEM) and assessment of the cyclic loading performance in comparison with allowable design loads	3
Properties of biomass obtained from short-rotation Inger willow clone grown on a contaminated and non-contaminated land	3
Evaluation of mycelium composite materials produced by five Patagonian fungal species	3
Comparison of some wood properties of juvenile black pines of different origin planted in the same habitat	3
Evaluation of Eucalyptus woodchip utilization as fuel for thermal power plants	3
Evaluation of wetting, structural and thermal properties of electrospun nanofibers at different pineapple leaf fiber / polyethylene terephthalate ratios	2
Effectiveness of European oak wood staining with iron (II) sulphate during natural weathering	2
Preparation and performance of tannin-glyoxal-urea resin-bonded grinding wheel loaded with SiO2 reinforcing particles	2
Antique wood preparation by inorganic salts treatment and its performance	2
Effects of hot-cold oil treatment on biological resistance and physical properties of Brutia pine sapwood	2
Mechanical, thermal, and morphological behaviour studies on coconut shell and palm kernel filler biocomposite	2
Weathering characteristics of impregnated and coated Calabrian pine wood	2
Effect of microwave treatment on drying and water impregnability of Pinus pinaster and Eucalyptus globulus	2
Influences of different drying climates on Eucalyptus camaldulensis wood properties	2
Viability of wood decaying fungal mycelium after microwave radiation of bamboo culm	2
Efficient utilization of corn stalk and poplar planer shavings in manufacturing particleboard	2
Comparative analysis of the physical and mechanical properties of kraft paper and watercolor paper	2
Tio2-modified Pinus elliottii: A pine wood presenting increased resistance to water and ultraviolet radiation	2
Influence of harvest region on properties of Cambará wood	1
Bending moment resistance of t-type joints reinforced with basalt and glass woven fabric materials	1
Modelling the influence of radiata pine log variables on structural lumber production	1
Alterations to the bending mechanical properties of Pinus sylvestris timber according to flatwise and edgewise directions and knot position in the cross-section	1
Efecto en las propiedades mecánicas de una resina pinífera modificada biodegradable, al utilizarla como compatibilizante o acoplante en formulaciones elastoméricas sin o con fibra de agave y hule de p	1
The use of herbal extracts in lacquer paint coloring and determination of some mechanical resistance properties on wood-based surfaces	1
Water absorption, thickness swelling and mechanical properties of cement bonded wood composite treated with water repellent	1
The effects of bioincising by Physisporinus vitreus on cuo retention and copper element leaching in oriental spruce wood	1
The use of borax pentahydrate of inorganic filler in medium density fiberboard production	1
Performance of cement-bonded wood particleboards produced using fly ash and spruce planer shavings	1
Influence of soil physicochemical properties on biometrical and physical features of persian oak wood	1
Combining artificial neural network and moth-flame optimization algorithm for optimization of ultrasound-assisted and microwave-assisted extraction parameters: Bark of Pinus brutia	1
Relationship between vessel parameters and cleavage associated with checking in Eucalyptus grandis wood	1
Weight-strength optimization of wooden household chairs based on member section size	1
Artificial intelligence to growth stresses predicting in Eucalyptus clones using dendrometric variables and wood density	1
The effect of sanding on the wettability and surface quality of Imbuia, Red oak and Pine wood veneers	1
Bonding quality of two lesser-used wood species Brachystegia spiciformis and Julbernardia globiflora from Mozambique	1
Effect of the thermal treatment on the chemical components, sorption, and shrinkage properties of Tectona grandis juvenile wood	1
Preparation of plywood panels using waste milk pouches as an adhesive	1
Quality of Tectona grandis for sawn wood production	1
Characterization of Acrocarpus fraxinifolius wood submitted to heat treatment	1
Natural durability of five tropical wood species in field decay tests	1
Exploratory studies on effects of growth location and conditioning on treatability and permeability of southern pine lumber	1
Influence of pretreatment on properties of bamboo portland cement particle board	1

Experimental and numerical study on a novel bamboo joint for furniture considering effect of loading type on mechanical parameters used in finite element method	1
Phenolics content and antioxidant activity of wood extractives from three clones of Acacia hybrid (Acacia mangium × Acacia auriculiformis)	1
Influence of the multiday and continuous hot press on the physical, mechanical and formaldehyde emission properties of the particleboard	1
Glulam connections assembled with screws in different installation angles	1
Formaldehyde free tannin-based adhesive with epoxy as hardener for plywood	1
Evolución del color y de la aparición de defectos en la madera de Eucalyptus globulus expuesta a intemperismo natural	1
Cellulose biosaccharification by Irpex lacteus wood decay fungus	1
Evaluación de la eficiencia energética de un proceso continuo de tratamiento de residuos agroforestales mediante carbonización hidrotérmica	1
Physical and mechanical properties of wood from invasive tree species	1
Antifungal and larvicidal effects of wood vinegar on wood-destroying fungi and insects	1
Influence of growth parameters on wood density of Acacia auriculiformis	1
Natural durability of some hardwoods imported into Korea for deck boards against decay fungi and subterranean termite in accelerated laboratory tests	1
Un enfoque de machine learning para la predicción de la calidad de tableros contrachapados	1
Investigations on the sorption behaviour of selected wood species from Cameroon	1
Application of a strain gauge to assess drying stresses in normal and tension wood of Corymbia citriodora	1
Nanocellulose addition to recycled pulps in two scenarios emulating industrial processes for the production of paperboard	1
OSB sandwich panel with undulated core of balsa wood waste	1
Particleboard experimental production with bamboo, pine and mate for one product of new applications	1
Colorimetría y densitometría en madera de Guazuma crinita	1
Compressive strength parallel to grain of earlywood and latewood of yellow pine	1
Evaluation and comparison of control and heat treated L-shape furniture joints produced from Scotch pine and ash wood under static bending and cyclic fatigue bending loadings	1
Kinetic analysis of thermal degradation of Cedrela odorata, Marmaroxylon racemosum and Tectona grandis from timber industry	1