Maderas-Ciencia y Tecnologia

Article	Citations
Comparative study on weathering durability property of phenol formaldehyde resin modified sweetgum and southern pine specimens	15
Effects of microcrystalline cellulose on some performance properties of chitosan aerogels	14
Prediction of surface roughness of CO2 laser modified poplar wood via response surface methodology	13
Properties of thermally modified teakwood	13
Mechanical and acoustic characteristics of four wood species subjected to bending load	9
Flooring characteristics of thermo-mechanical densified wood from three hardwood tropical species in Costa Rica	7
Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production	7
Changes in the content and composition of the extractives in thermally modified tropical hardwoods	6
Influence of initial wood moisture on decay process by two brown-rot fungi	6
Quantitative evaluation of microwave irradiation on short-rotation plantation wood species	6
Shear and adhesion strength of open and closed system heat-treated wood samples	5
Estimation of density, moisture content and strength properties of Tectona grandis wood using Near Infrared Spectroscopy	5
Assessment of cellulose nanofibers from bolaina blanca wood obtained at three shaft heights	5
Combined effects of neem (Azadirachta indica) and sesame (Sesamum indicum) oil as a wood preservative on subterranean termites in the field	5
Optimization of CNC operating parameters to minimize surface roughness of Pinus sylvestris using integrated artificial neural network and genetic algorithm	5
Mechanical and fire properties of oriental beech impregnated with fire-retardants and coated with polyurea/polyurethane hybrid and epoxy resins	5
Plywoods of northeast Argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values	5
Changes in wood properties of chestnut wood structural elements with natural aging	5
Characterizations of tree-decay fungi by molecular and morphological investigationsin aniranian alamdardeh forest	4
Juvenile-mature wood evaluation along the bole considering the influence of silvicultural treatments	4
Crystallinity and impact strength improvement of wood-polylactic acid biocomposites produced by rotational and compression molding	4
Evaluation of the properties of hybrid yellow poplar (Liriodendron sino-americanum): A comparison study with yellow poplar (Liriodendron tulipifera)	4
Deep eutectic solvent pulping from sorghum stalks	4
Effect of borax-boric acid and ammonium polyphosphate on flame retardancy of natural fiber polyethylene composites	4
Energy gains of Eucalyptus by torrefaction process	4

Comparison of some wood properties of juvenile black pines of different origin planted in the same habitat	3
Evaluation of Eucalyptus woodchip utilization as fuel for thermal power plants	3
Evaluation of wood-based coating performance for ultraviolet roller and conventional air-atomization processes	3
Automatic identification of charcoal origin based on deep learning	3
Elastic constants of Chilean Pinus radiata using ultrasound	3
Determination of processing characteristics of wood materials densified by compressing	3
Biologically synthesised copper oxide and zinc oxide nanoparticle formulation as an environmentally friendly wood protectant for the management of wood borer, Lyctus africanus	3
Experimental study on full-scale glulam beams manufactured with Eucalyptus urograndis	3
Characterization of nanocellulose/pyrolysis oil nanocomposite films	3
An evaluation of clove (Eugenia caryophyllata) essential oil as a potential alternative antifungal wood protection system for cultural heritage conservation	3
Structural analyses of wooden chairs by finite element method (FEM) and assessment of the cyclic loading performance in comparison with allowable design loads	3
Properties of biomass obtained from short-rotation Inger willow clone grown on a contaminated and non-contaminated land	3
Evaluation of mycelium composite materials produced by five Patagonian fungal species	3
Evaluation of wetting, structural and thermal properties of electrospun nanofibers at different pineapple leaf fiber / polyethylene terephthalate ratios	2
Effectiveness of European oak wood staining with iron (II) sulphate during natural weathering	2
Preparation and performance of tannin-glyoxal-urea resin-bonded grinding wheel loaded with SiO2 reinforcing particles	2
Antique wood preparation by inorganic salts treatment and its performance	2
Effects of hot-cold oil treatment on biological resistance and physical properties of Brutia pine sapwood	2
Mechanical, thermal, and morphological behaviour studies on coconut shell and palm kernel filler biocomposite	2
Weathering characteristics of impregnated and coated Calabrian pine wood	2
Effect of microwave treatment on drying and water impregnability of Pinus pinaster and Eucalyptus globulus	2
Influences of different drying climates on Eucalyptus camaldulensis wood properties	2
Viability of wood decaying fungal mycelium after microwave radiation of bamboo culm	2
Efficient utilization of corn stalk and poplar planer shavings in manufacturing particleboard	2
Comparative analysis of the physical and mechanical properties of kraft paper and watercolor paper	2
Tio2-modified Pinus elliottii: A pine wood presenting increased resistance to water and ultraviolet radiation	2
Preparation of plywood panels using waste milk pouches as an adhesive	1
OSB sandwich panel with undulated core of balsa wood waste	1
Particleboard experimental production with bamboo, pine and mate for one product of new applications	1
Colorimetría y densitometría en madera de Guazuma crinita	1
Compressive strength parallel to grain of earlywood and latewood of yellow pine	1
Evaluation and comparison of control and heat treated L-shape furniture joints produced from Scotch pine and ash wood under static bending and cyclic fatigue bending loadings	1
Kinetic analysis of thermal degradation of Cedrela odorata, Marmaroxylon racemosum and Tectona grandis from timber industry	1
Bending moment resistance of t-type joints reinforced with basalt and glass woven fabric materials	1
Alterations to the bending mechanical properties of Pinus sylvestris timber according to flatwise and edgewise directions and knot position in the cross-section	1
The use of herbal extracts in lacquer paint coloring and determination of some mechanical resistance properties on wood-based surfaces	1
Water absorption, thickness swelling and mechanical properties of cement bonded wood composite treated with water repellent	1
The effects of bioincising by Physisporinus vitreus on cuo retention and copper element leaching in oriental spruce wood	1
Cellulose biosaccharification by Irpex lacteus wood decay fungus	1
The use of borax pentahydrate of inorganic filler in medium density fiberboard production	1
Physical and mechanical properties of wood from invasive tree species	1
Performance of cement-bonded wood particleboards produced using fly ash and spruce planer shavings	1
Influence of growth parameters on wood density of Acacia auriculiformis	1
Influence of soil physicochemical properties on biometrical and physical features of persian oak wood	1
Combining artificial neural network and moth-flame optimization algorithm for optimization of ultrasound-assisted and microwave-assisted extraction parameters: Bark of Pinus brutia	1
Relationship between vessel parameters and cleavage associated with checking in Eucalyptus grandis wood	1
Weight-strength optimization of wooden household chairs based on member section size	1
The effect of sanding on the wettability and surface quality of Imbuia, Red oak and Pine wood veneers	1
Effect of the thermal treatment on the chemical components, sorption, and shrinkage properties of Tectona grandis juvenile wood	1
Quality of Tectona grandis for sawn wood production	1

Characterization of Acrocarpus fraxinifolius wood submitted to heat treatment	1
Natural durability of five tropical wood species in field decay tests	1
Exploratory studies on effects of growth location and conditioning on treatability and permeability of southern pine lumber	1
Influence of harvest region on properties of Cambará wood	1
Influence of pretreatment on properties of bamboo portland cement particle board	1
Modelling the influence of radiata pine log variables on structural lumber production	1
Experimental and numerical study on a novel bamboo joint for furniture considering effect of loading type on mechanical parameters used in finite element method	1
Efecto en las propiedades mecánicas de una resina pinífera modificada biodegradable, al utilizarla como compatibilizante o acoplante en formulaciones elastoméricas sin o con fibra de agave y hule de p	1
Phenolics content and antioxidant activity of wood extractives from three clones of Acacia hybrid (Acacia mangium × Acacia auriculiformis)	1
Influence of the multiday and continuous hot press on the physical, mechanical and formaldehyde emission properties of the particleboard	1
Glulam connections assembled with screws in different installation angles	1
Formaldehyde free tannin-based adhesive with epoxy as hardener for plywood	1
Evolución del color y de la aparición de defectos en la madera de Eucalyptus globulus expuesta a intemperismo natural	1
Evaluación de la eficiencia energética de un proceso continuo de tratamiento de residuos agroforestales mediante carbonización hidrotérmica	1
Antifungal and larvicidal effects of wood vinegar on wood-destroying fungi and insects	1
Natural durability of some hardwoods imported into Korea for deck boards against decay fungi and subterranean termite in accelerated laboratory tests	1
Un enfoque de machine learning para la predicción de la calidad de tableros contrachapados	1
Investigations on the sorption behaviour of selected wood species from Cameroon	1
Artificial intelligence to growth stresses predicting in Eucalyptus clones using dendrometric variables and wood density	1
Application of a strain gauge to assess drying stresses in normal and tension wood of Corymbia citriodora	1
Bonding quality of two lesser-used wood species Brachystegia spiciformis and Julbernardia globiflora from Mozambique	1
Nanocellulose addition to recycled pulps in two scenarios emulating industrial processes for the production of paperboard	1
Some physical and mechanical properties of Laminated Veneer Lumber reinforced with glass fiber mesh	0
Changing the calculated surface area of wood samples to define drying schedules for Eucalyptus clones	0
Effects of thermal treatment and weathering in the resistance against termites of a fast-growing pine wood	0
El bambú Tonkin (Pseudosasa amabilis) como material a explorar en el Ecodiseño. El diseño de un puesto de mercado como caso de estudio	0
Characterisation of lignins isolated from Bamboo organosolv and kraft black liquor	0
The effect of adding graphene oxide to urea formaldehyde resin and its efficacy on three layered particleboard	0
Usability of fractometer for the purpose of a practical preliminary assessment tool for wood density of Pinus brutia	0
Fotogrametría SfM de bajo costo para monitorización de ensayos sobre estructuras laminares reticulares de madera deformadas elásticamente a escala real	0
Wettability and decay of particleboards manufactured with thermally treated sugarcane residue and bamboo (Dendrocalamus asper) particles	0
Assessing the effectiveness of static heuristics for scheduling lumber orders in the sawmilling production process	0
Variation in specific gravity and shrinkage of tapped rubberwood	0
Shear strength and hardness of two tropical wood species as function of heat treatment	0
Radial variation in cell morphology of Melia azedarach planted in northern Vietnam	0
Caracterización morfológica de las traqueidas de pino híbrido de rápido crecimiento	0
Tiempo de esterilización mediante vapor de la madera aserrada de Pino radiata	0
Effect of chip temperature during bonding on particleboard properties	0
Research of computerized numerical control laser processing qualities of some wood species used ın the furniture industry	0
Carbon footprint of wooden and plastic pallets: A quantification with different software tools	0
Wood quality of ten clonal progenies of rubber tree as raw material for bioenergy	0
Cross laminated timber bonding quality for different brazilian species and pressing levels	0
Effect of natural aging on selected properties of wooden facade elements made of scots pine and chestnut	0
Erratum	0
Spruce chips stabilization in wood-cement materials: Effect of matrix composition	0
Shear strength in friction welded joint of poplar wood impregnated with copper-based wood preservative	0
Acknowledgment of Referees Maderas-Cienc Tecnol 2022-2023	0
Efecto del ángulo microfibrilar en las características tecnológicas de la madera de Pinus pseudostrobus var. apulcensis	0
Evaluation of OSB panels using residual wood with low contents of castor oil polyurethane resin	0
Colorimetría de los tallos del bambú (Guadua angustifolia) en tres estados de madurez	0
Use of Eucalyptus grandis clones treated with a water repellent to improve the dimensional stability of utility poles	0
Utilization of nanotalc modified adhesives in plywood panels	0
Comparative performance of Polymeric Xylenol Tetrasulfide versus creosote in an AWPA E7 field stake test	0
A novel method for producing a glulam from the wood of peeler cores	0
Gluing characteristics of Papua New Guinea timber species for various non-structural applications	0
Mass transfer properties of Acacia mangium plantation woodt	0
Thermal modification of fast-growing Firmiana simplex wood using tin alloy: Evaluation of physical and mechanical properties	0
Experimental and numerical study on mounting force and withdrawal strength of self-threaded dowels in particleboard	0
Some physical and mechanical properties of particle boards produced with hazelnut husk and astragalus (Astragalus membranaceus) plant	0
Status of production, distribution and determinants of biomass briquette acceptability in Kampala City, Uganda	0
Some surface characteristics of oriental beech wood impregnated with some fire-retardants and coated wıth polyurea/polyurethane hybrid and epoxy resins	0
Performance characterization of plywood panels bonded with melamine-urea-formaldehyde resin and cellulose nanofibril/borax as an additive	0
Using acoustic testing to estimate strength and stiffness of wood-polymer composites	0
Comparing the structure of spruce wood biodegraded by Trametes versicolor and Gloeophyllum trabeum and further utilization of this material	0
Radial compression strength can predict the hydraulic vulnerability of mature Norway spruce sapwood	0
Evaluation of the mechanical performance of chairs without fasteners constructed of wood–based panels	0
Applying colorimetry for wood differentiation of fabaceae species grown in southern Brazil	0
Decay capabilities of basidiomycetes colonizing air-seasoning red oak and blackgum railroad ties	0
Chemical variations in tension wood of poplar tree induced by intermittent bending, fertilizer and hormone treatments	0
Mechanical characterization of visually graded boards from turkish fir and black pine by nondestructive and destructive tests	0
VOCs and PM listing of Eucalyptus globulus combustion in residential wood stoves	0
Investigation of wood properties and resistance of 25-year-old Gmelina arborea wood selected from crown region to termite attack	0
The wide variation of amazonian stocked hardwoods affecting natural resistance to arboreal termites over time	0
Total phenolics, tannin contents, antioxidant properties, protein and sensory analysis of Pleurotus ostreatus, Pleurotus citrinopileatus and Pleurotus djamor cultivated on different sawdusts	0
Properties of gypsum particleboard with added mineral dolomite	0
Chemical variation of five natural extracts by non-polar solvent	0
Analysis of biochars produced from the gasification of Pinus patula pellets and chips as soil amendments	0
Effects of artificial weathering on the surface properties of coated radiata pine	0
Estimation of above ground biomass and carbon of Pinus caribaea in Bulolo forest plantation, Papua New Guinea	0
Chemical constituents of palm wastes slow pyrolysis derived vinegar	0

Lumber drying of Pinus: Geostatistics applied to drying kilns	0
Wood polymer composite bonded veneer based hybrid composites	0
Natural weathering performance of thermally treated poplar and black pine wood	0
Wood colorimetry of Lauraceae species native to Brazil	0
Physical and anatomical properties of Hevea brasiliensis clones	0
Physical, mechanical, and thermal characteristics of alkaline copper quaternary impregnated oriental beech wood	0
Theoretical model for further development of intumescent substances to remediate smoldering in wood fiber insulation panels	0
Efecto del aprovechamiento forestal en la formación de madera en árboles remanentes de Abies religiosa	0
Biochemical features of organic extractives from Eucalyptus and Corymbia woods using ethanol as a solvent	0
Relationship between acoustic wave velocity and mechanical properties in Acacia mangium wood	0
Vigas de pino resinoso del noreste de Argentina bajo cargas de larga duración: Deformaciones, recuperación y criterios de diseño	0
Particle image velocimetry technique for analysis of retractibility in woods of Pinus elliottii	0
Comparative analysis of the physical and mechanical properties of kraft paper and watercolor paper	0
Fumigation of imported Tectona grandis and southern yellow pine with Pongamia pinnata seed oil against sapstain and mould	0
Physical properties of palmyra palm wood for sustainable utilization as a structural material	0
Performance of visible and Near-infrared spectroscopy to predict the energetic properties of wood	0
Simultaneous treatment with oil heat and densification on physical properties of Populus × Canadensis wood	0
Determinación de la edad de transición de madera juvenil a madura y de sus valores elasto-resistentes en Pinus contorta	0
Machine learning para predecir la calidad del secado de chapas en la industria de tableros contrachapados de Pinus radiata	0
Toxicity and repellency of chlorpyrifos nanocapsules against subterranean termite Coptotermes curvignathus	0
Time-moisture superposition principle in creep behavior of white oak with various earlywood vessel locations	0
Physical-mechanical properties and heat transfer analysis of OSB produced with phenol-formaldehyde and ZnO nanoparticles addition	0
Influence of thermal pretreatments on dimensional change and humidity sensitivity of densified spruce and poplar wood	0
Thinning wood properties of Nothofagus alpina under three different silvicultural conditions	0
Effects of glue spreading rate and veneer density on sugi (Cryptomeria japonica) plywood adhesive penetration	0
Densidad y proporción de albura y duramen en nuevos clones de Eucalyptus spp	0
Improvement of gluing parameters in Edge Glued Panels	0
Variations in decay resistance of Cryptomeria fortunei	0
Synergistic influence of flame retardant additives and citric acid on the functional properties of rice husk/wood blended particleboards	0
Evaluation of bean residues in the production of agglomerated panels	0
Fire performance of Pinus taeda wood treated with zinc borate before and after leaching	0
Wood/water relations of 15 South American lesser-used wood species	0
Influences of oak utilization on the medium density fiberboard properties	0
Predictive expressions for withdrawal force capacity of various size of dowels from particleboard and medium density fiberboard	0
The effects of thermal aging on color and glossiness in UV cured coatings applied to sessile oak	0
Surface changes in wood submitted to thermomechanical densification	0
Preliminary evaluation of the incorporation of cellulose nanofibers as reinforcement in waterborne wood coatings	0
Quality characteristics of the selected variant of Paulownia tomentosa (Robust4) wood cultivated in Hungary	0
Comparison of thermal performances of plywood shear walls produced with different thermal insulation materials	0
Biochemical features of organic extractives from Eucalyptus and Corymbia woods using ethanol as a solvent	0
Evaluation of the interface of Eucalyptus specimens welded by rotary friction	0
Mechanical behaviour of grapevine wood affected by Xylotrechus arvicola	0
Effect of heat treatment on physical, mechanical and chemical properties of angelim wood	0
Biosorption of methylene blue and malachite green from single and binary solutions by Pinus pinaster bark	0
Biological resistance of thermally modified Gmelina arborea wood	0
Sampling sufficiency for mechanical properties of wood	0
Influence of rice straw and wood fiber combination on physical and mechanical properties of rice straw pulverized composite board	0
Particle image velocimetry technique and ultrasound method to obtain the modulus of elasticity of Bertholletia excelsa wood	0
Evaluación de impactos ambientales de viviendas en madera: El caso de “La casa Uruguaya”	0
Comportamiento mecánico de muros de corte de Eucalyptus grandis: Resultados experimentales versus el criterio de las normas europeas	0
Effect of ultra-low temperature on some mechanical properties of painted and film-coated plywood	0
Physical, chemical and mechanical characterization of Acrocarpus fraxinifolius cultivated in Sao Paulo	0
Thermal properties of Acacia mangium Cross Laminated Timber and its gluelines bonded with two structural adhesives	0
Determination of the strength performance of table frames	0
Using of versine and sagitta calculations for log sawing optimization, part 1: Circular cross-section	0
Contribution of extractives to the bark color of Caesalpinia sappan	0
Anatomy based papermaking potential of some woody plants under different ecological conditions	0
Influence of silicone oil thermal modification on mechanical properties of Masson pine wood	0
A new method for determining air permeabilities of wood-based panels	0
The influence of road traffic and industrial plant-induced air pollution on the physical, mechanical, chemical and morphological properties of the black pine wood	0