Polymer-Korea

Papers
(The TQCC of Polymer-Korea is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-03-01 to 2024-03-01.)
ArticleCitations
Effect of Surface Modified Halloysite Nanotubes (mHNTs) on the Mechanical Properties and Swelling Resistance of EPDM/NBR Nanocomposites31
Effect of Halloysite Nanotubes (HNTs) on Mechanical Properties of EPDM/NBR Blend-Nanocomposites29
Effect of Modified Nanographene Oxide on the Mechanical and Swelling Properties of Silicone Rubber Nanocomposites22
Effect of Nanographene Oxide on the Mechanical Properties of EPDM/SBR Nano-composites15
Evaluation of Tensile Properties of Glass/Sisal and Glass/Jute Fibers Reinforced Hybrid Composites at Different Stacking Sequences8
Preparation, Structural Characteristics, and Properties of Airlaid Nonwoven Silk Fabric7
Effects of Nanosilica on the Mechanical Properties and Swelling Resistance of EPDM/NBR Nanocomposites7
Role of Reinforcement Materials on Mechanical and Tribological Properties of PTFE Composites6
Artificial Neural Network for Prediction of Mechanical Properties of HDPE Based Nanodiamond Nanocomposite6
Study on Characteristic Changes of Contact Lenses According to Interpenetrating Polymer Network Time and Method Using Seaweed Polysaccharide5
Drug Delivery Behavior of PCL and PCL/PEG Microcapsules Prepared by High-speed Agitator and Syringe Pump5
Drop Weight Impact and Tension-Tension Loading Fatigue Behaviour of Jute/Carbon Fibers Reinforced Epoxy-based Hybrid Composites4
Physical Nature of Biodegradable Polydioxanone Filaments upon Synthetic Conditions3
Non-isothermal Crystallization Behavior, Rheological and Thermal Conductive Properties of Recycled Polyethylene Terephthalate/Polyethylene Blends3
Screening of Polymer Additives in Poloxamer 407 Hydrogel Formulations for Intravesical Instillation: Evaluation of Mechanical Properties, Gel-forming Capacity, and Drug Release3
Mechanical and Flame Retardant Properties of SAN Coated PC/PTFE Composite3
Acoustic Properties of Polyurethane Foams Including Low Molecular Weight Polyol3
Thermal Properties of Poly(lactic acid) Film Containing Antibacterial Quercetin3
Different Biopolymers" Effects on the Evaluation and Characterization of Floating Tablets Prepared by Lyophilization Technique to Improve the Quality Control Parameters3
Thermal and Mechanical Properties of Polypropylene/Cellulose Nanofiber Composites3
Variations in the Impact Strength of Material Extrusion-type 3D Printed Specimens Depending on Tool Path and Building Direction3
Characteristics of Cellulose Acetate-g-Poly(L-lactic Acid) (CA-g-PLA) and Its Application as a Compatibilizer for CA/PLA Blends3
Particulate Reinforcements in Dicyanate Composites with Nanoporous Aluminum Fumarate as Reactive Filler: Thermal Properties3
Effect of Comonomer Composition and Content on the Polymerization and Thermal Behavior of Polyacrylonitrile-Based Carbon Fiber Precursors3
Influence of Sulfur/Accelerator Ratio on Tensile Properties and Structural Inhomogeneity of Natural Rubber3
Castor Oil and HER Based Polyurethanes: Synthesis, Characterization and Structure-Thermal Stability Relation2
Effect of Ionic Natural Polysaccharides on the Functional Enhancement of Porous Hydrogel Contact Lenses2
Synthesis and Application of Cationic Waterborne Polyurethane as Fixing Agent for Cotton Fabric2
Biodegradation of Aliphatic Polyesters Under Composting and Seawater Conditions2
Effect of Boehmite and Vermiculite on Flame Retardancy and Mechanical Properties of PET2
Synthesis of Chelate Resins with Multiple Functional Groups Based on Simplified Reaction Using Mixed Solvent and Their Improved Boron Adsorption Characteristics2
Preparation and Properties of Eco-friendly Polyurethane Nanocomposites Using Cellulose Nanocrystals with Amino Group as Fillers2
Enhanced Thermal Conductivity of Epoxy Composites Filled with Cu Foam and Functionalized with MWCNT 3D Network2
Effect of the Reinforcement Phase on the Mechanical and Biocompatibility Properties of PLA Matrix Nano Composites2
Antioxidant Properties and Characterization of Contact Lenses Containing Tannic Acid and Seaweed Polysaccharides2
Preparation of Electroconductive Cotton Fibers by Polyethyleneimine Pretreatment and Electroless Plating of Copper Sulfide2
Effect of the Chemical Structure of the Oxidants on the Opto-electronic Properties of Polypyrrole Thin Film2
Synthesis and NIR Absorption Properties of Triethylene Glycol Substituted Metallo-Naphthalocyanines2
Compatibility and Impact Properties of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blend Using Poly(butyl acrylate)2
Influence of Compatibilization and Internal Lubricant on the Mechanical and Thermo-mechanical Properties of PLA/TPU Compound2
Study on the Generated Particular Matters of TBR Tire with Different Tread Rubber Formulation2
Study on Physical Properties of Polyphenylene Sulfide Composites with Variothermal Mold Temperatures2
Polypropylene Composite with Aminated Cellulose Nanocrystal2
Bio-based Epoxy Thermoset Containing Stilbene Structure with Ultrahigh Tg and Excellent Flame Retardancy2
Highly Porous Biocomposite Scaffolds Fabricated by Chitosan/Alginate/Diatom for Tissue Engineering2
Mechanical Properties and Thermal Conductivity of Polycarbonate Composite Containing Aluminum-exfoliated Graphite Nanoplatelet Hybrid Powder2
Nanomaterial Enhanced Polyelectrolyte Membranes for Hydrogen-Oxygen Fuel Cells1
Synthesis and Characterization of Poly(lactic acid-co-glycolic acid-co-ε-caprolactone) and Its Pressure Sensitive Adhesive Property1
Blue-Light Blocking Hydrogel Contact Lenses Based on ortho-Benzoquinone1
Improved Barrier Properties of Alkylated Graphene Oxides/Poly(vinyl alcohol) Composite Films Crosslinked with Dialdehyde Cellulose Nanocrystals1
Experimental and Numerical Investigation of Ballistic Impact Analysis on Kevlar Reinforced Polymer Composites and Shape Memory Alloy Sheet Reinforced Kevlar Epoxy Polymer Composites1
Synthesis and Application of Polysiloxane-Modified Polyurethane as Anti-pilling Finishing Agent for Polyester-Cotton Fabric1
3-D Modeling of Epoxy Reaction Molding Process for GIS Spacer1
Synthesis and Characterization of Hybrid Polyimide Composites Containing Ladder-like Polysilsesquioxane and POSS1
Lifetime Prediction of Fluoroelastomer Using Accelerated Aging Test1
Preparation and Thermoresponsive Properties of 2-Hydroxy-3-butoxypropyl Hydroxyethyl Cellulose and Its Hydrogel Crosslinked with Epichlorohydrin1
Physical Properties of Propellants Containing Dioctyl Adipate Plasticizers Containing Different Liner Plasticizers1
Synthesis and Characteristic of Cross-linked Hyaluronic Acid Hydrogels with Putrescine under the Neutral pH Condition1
Synthesis and Characterization of Vinyl Terminated Poly(vinyl methyl Siloxane) by Ring Opening Polymerization1
Gelation Behavior and Self-healing Property of Glycol Chitosan with Catechol Functionality1
Evaluation of Icephobic and Dissipation Performance on Coating Materials for Preventing Overhead Transmission Line from Ice/Snow Damages1
Dependence of the Thermal Conductivity of PMMA, PS and PE on Temperature and Crystallinity1
Synthesis and Characterization of Novel Polyimides Derived from 2,2’-Bis[4-(6-amino-3-pyridinoxy) phenyl] Propane1
Accelerated Thermal Aging of Natural Fiber/Polypropylene Composites for Automotive Interior Parts1
Study on the Effect of Chemical Reaction Between Component Polymers and Gelation on the Physical Properties of Aliphatic Polyketone/polyamide 6 Blends1
Adjusting Water Absorption, Stimulus-Response and Adsorption Capacity for Toxic Heavy Metal Ions of Poly(acrylamide-co-potassium methacrylate) Hydrogel by Poly(ethylene glycol) Addition1
Effect of Reactivity Ratio of Photoreactive Acrylate Monomers on Mechanical Properties of Cured Film1
Effect of 4-Hydroxybutyrate Content on Physical Properties of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)1
Synthesis and Characterization of Polyaniline-Polyimide Thin-film Composite Membranes for Vegetable Oils/Solvent Separation1
Study on the Odor and Physical Properties of Natural Fiber/Polypropylene Composites with Metal Oxides1
Preparation of Poly(ethylene glycol) Hydrogel Particles Containing Gold Nanoparticles by In Situ Polymerization1
Analysis of Mechanical Properties in Thermoplastic Polyurethane-Microcrystalline Cellulose Composites1
Effect of Physical Structure of Thermoplastic Polyurethane on the Supercritical CO₂ Foaming1
Effect of Photo-initiators on the Crosslinking Behavior of Organic Thin Films and Their Applicability to Flexible Display Encapsulation Layer1
Solar-driven Steam Generation via Cellulose Fiber and Au/Ag Nanoparticle-based Light Absorber1
Nucleation-Growth Processes and Morphological Evolution of Polyaniline during Potentiodynamic Polymerization1
Fabrication and Characterization of Cell Spheroid Containing Porous Microparticles1
Noncovalent Functionalization of Single-walled Carbon Nanotubes Using Alkylated Zinc-phthalocyanine for the β-phase Formation of a Polyvinylidene Fluoride Matrix1
Effect of Thermal Degradation on Physical Properties of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)1
Effect of EVA-g-MAH on Water Absorption Properties of TPU/EVA Blends1
Effect of Commingled Yarn Type on the Manufacturing of Glass Fiber/Polypropylene Composite Prepreg1
Ion-Exchange Functional Group-Containing Poly(ether ether ketone)s: Preparation and Use as Binder in Fabrication of Carbon Electrodes to Improve Capacitive Deionization Efficiency1
Utilization of Catalytic Hardener 2PZ-CN for Improving Thermal Conductivity of DGEBA Epoxy Resin1
Control of Surface Morphology and Wetting Properties of Porous Layer-by-Layer Film1
Characterization of Chitosan-Poly(ε-caprolactone) Hybrid Nanofiber Sheets Containing Insulin for Wound Dressings1
Influence of Blend Ratio on Long-Term Thermal Aging and Oil Resistance in Fluorosilicone/Silicone Rubber1
Comparative Study of Shape Memory Alloy Reinforced Kevlar Polymer Composite in Sheet and Wire Form with Plain Kevlar Polymer Composite1
Studies on the Optimizing the Properties of Thermoset Polyurethane Resin for In-mold Coating1
Preparation, Characterization of Chitosan-Coated/Uncoated Boron Nanoparticles and In-Vitro Evaluation of Their Antimicrobial Effects1
Study on Thermal Conductivity and Interface Bonding Properties of Polyetheretherketone/Zinc-aluminum Alloy Composites1
PEGylated Hybrid Hydrogels with Tunable Swelling Property and Biodegradability1
Study on Flame Retardancy and Adhesive Properties of Hybrid Flame Retardant Composite Filler-Based Polyurethane1
Elution Behavior of Nizatidine Immediate Release Tablets According to Lactose and Microcrystalline Cellulose Content1
Preparation and Characterization of Magnetized Microneedles for Magnetic Resonance Molecular Imaging1
Study on Contact Lens That Blocks Blue Light from LED1
Development of Adhesive for Laminated Electrical Steels Having Excellent Adhesion and Oil Resistance and Its Application for Dot-bonded Motor Core for Electric Vehicle1
Camouflage Coating Using Photochromic Microcapsules and Epoxy Resin1
Development of Composite Membranes of Sulfonated Poly(ether ether ketone) and Gadolinium-doped Ceria Nanoparticles for Polymer Electrolyte Membrane Fuel Cells1
Comparing Waste Gypsum with CaCO₃ as Filler Towards Developing Low-cost PBAT C omposites1
Control of Dissolution Rate of Sodium-Alginate/Polyacrylamide Hydrogel for Selectively Dissolvable Water-Blocking Device1
Preparation of Porous TPU-PPy Flexible Composite Using 3D Printer and Its Application as Electrode Scaffold for Energy Storage Devices1
Fabrication of Starch-Lauric Acid Nanoparticles for Potential Tumor Therapy1
Preparation of Injectable Hydrogels Immobilized with FGF Using UV-curable Hyaluronic Acid Derivatives1
Double-Layer Wound Dressing Consisting of an Upper Layer of Robust Polyurethane/Polycaprolactone and a Lower Layer of Biodegradable Polycaprolactone/Gelatin/Cellulose1
Analysis of Foaming Characteristics and Physical Properties of Polyurethane Foam according to Foaming Agents1
Potential of 3D Bioprinting Techniques in Tissue Engineering1
Synthesis of a Block Silicone Softener by Alkali Method and Its Application on Cotton Fabric1
Simulation of Injection Molding Process Considering Rheological Properties of Polypropylenes1
Control of Phase Transition Temperature of Poly(N-isopropylacrylamide) Based Polymers for Thermotropic Smart Window by Copolymerization with Hydrophilic/Hydrophobic Comonomers1
Adsorption of Cr(VI) from Aqueous Solutions Using Algerian Pinus Halepensis Tannin Foam1
Effect of Contact Pressure on Reciprocating Wear Behavior of PEEK, PTFE, and UHMWPE1
Study on the Crystallization Behavior and Rheological Properties of Nylon 6/Expanded Graphite Composites1
Non-isothermal Crystallization of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)1
Density Doubling of Block Copolymer Nanopatterning via Selective Swelling1
Study of Compression Set of Ethylene Vinyl Acetate (EVA) Foams1
Biodegradation Behavior of Polybutylene Succinate Fibers in Simulated Seawater with Accelerating Degradation Conditions1
Injectable Thermogel/Microsphere Hybrid Formulation System for Intratympanic Delivery of Dexamethasone1
Effect of Metal Oxides on the Odor and Physical Properties of Polypropylene/Bamboo Fiber Composite1
0.04555606842041