Polymer-Korea

Article	Citations
Study on the Superhydrophobic Effect of Polymer Pattern Film	57
Thiophene-benzimidazolium Polymer Salts: Synthesis, Characterization, Antimicrobial Activities, and Evaluation in Terms of Occupational Health	57
Characteristics of a Halloysite Filled Epoxy Resin System	50
Study on Rubber Toughening of Aliphatic Polyketone via Polyether-block-polyamide	44
Critical Review of Heat-resistant and Mechanical Properties of Acrylonitrile -butadiene-styrene (ABS) Modification for Fused Deposition Modeling (FDM)	35
Enhancing the Photostability of Poly(Vinyl Chloride) (PVC) Through the Incorporation of Cerium and Samarium Oxide	22
Fabrication of Tubular Scaffolds with Aligned Fibrous Structures Containing Cells within Pockets Using Electrohydrodynamic Methods	15
Lithium Manganese Oxides Cathodes Functionalized by Ionic Monomer Additive as a Surface Modifier for Lithium-ion Batteries	6
Preparation of Thermally Conductive Die Attach Adhesive and Its Application in High-power Lighting LED Packaging	6
Investigation of the Effect of Fiber on the Morphological and Mechanical Properties of Chopped Cissus Quadrangularis/Sugarcane Fiber-reinforced Hybrid Composites for Sustainable Applications	5
Wound Healing Effect of Gallic Acid-g-Chitosan Gel	4
Thermal and Mechanical Properties of Antimicrobial Poly(lactic acid) Composites	4
Parsley (Petroselinum crispum) Fraction-Loaded Nanoemulsion Using Coconut Oil: A Novel Approach for Hair Growth Promotion	3
Effect of Polymer Adsorption in Magnetic Nanoparticle Dispersion by Rheological and Magnetic Characterizations	3
Hydrophobic Layer-by-Layer Film Assembled Using Poly(ethylene-co-acrylic acid) Ionomer	3
Synergistic Flame-Retardant Effects of Boehmite and Aluminum Diethylphosphinate in Glass Fiber-Reinforced PET Composites: Enhanced Thermal Stability, Mechanical Performance, and Fire Safety	3
Electrochemical Glucose Sensing by Using Glucose Dehydrogenase Enzyme and the Synthesized Poly-ruthenium Mediator	3
Effect of Silane Coupling Agent on Water Absorption and Mechanical Properties of TPU/EVA/Silica Compounds	3
Study on the Orientation of Two-dimensional Shaped Additives in Injection Molded Specimen Containing Protrusion Shape	3
Facile Preparation and Characterization of Transparent Polyurethane Using Eugenol-Based Bio-Polyol via Thiol-ene Reaction	3
Improvement of Mechanical Properties of Polymeric Binders Using Urethane Acrylate Resin	2
Fabrication of Transmittance Tunable Porous Elastomers for Smart Window Applications	2
Formulation Design of Sustained-release Dosage form of Ticagrelor by Solid Dispersion Using Eudragit RS/RL	2
Pyrolysis of Waste Tires in a Fixed Bed Reactor: Influence of Additive on Sulfur Content in Pyrolysis Oil	2
Improved Mechanical Properties : Composite of Surface-modified Cellulose Nanofiber and Ultra-High Molecular Weight Polypropylene	2

Enhanced Electrochemical Properties of Electron Beam Irradiated Carbon Nanofibers as an Electrode for Supercapacitor	2
Physical and Physico-mechanical Properties of Elastomers Based on Urethane Oligomers with Terminal Epoxy Groups as Affected by the Structure of Diisocyanates and Diamines	2
Gas Sensor Based on Volumetric Analysis for Measuring Gas Uptake and Diffusivity in Gas Charged Polymer Specimen	2
Calculating Activation Energy of Phthalonitrile Using the Flynn-Wall-Ozawa Equation	2
Tailoring Network Structure of Photopolymerizable Gelatin Hydrogels as 3 D Cell Culture Scaffolds	2
Development of a Porous Film with Enhanced Mucosal Adhesion and Drug Release Properties for the Treatment of Aphthous Stomatitis	2
Cross Linked Polyvinyl Alcohol Embedding Resin by Boric Acid and NaOH for Cryomicrotomy	2
3-D Modeling of Epoxy Reaction Molding Process for GIS Spacer	2
Chemotaxis Assay of RAW264.7 Cells Using a Simple Microfluidic Chip with Lipopolysaccharide Gradient	2
Investigations on the Mechanical Properties of PC and ABS Electrospun Nanofiber Embedded Glass Fiber Reinforced Composite	2
Study on the Physical Properties of Rigid Polyurethane Foam viaPhenolic Resin-Based Prepolymer	2
Flame Retardancy of Rigid Polyurethane Foam According to Particle Size and Expansion Rate of Expandable Graphite	2
Elastomer Film of High-Density Porosity for Efficient Light Scattering	2
Poly(ethylene glycol)-Keratin Hydrogels Prepared via Thiol-Maleimide Reaction	2
Synthesis of End-functionalized Acrylic Resins and Their Mechanical Properties	2
Development of Seed Germination Enhancement Encapsulation Technology Using Carboxymethyl Cellulose Double-Layer Hydrogel Films	2
Influence of Water Content on the Structural Evolution of PA6 Cast Film During Stretching Uniaxial Process	1
Sulfonated Poly(arylene ether sulfone) and Phosphonic Acid-Functionalized Polyhedral Oligomeric Silsesquioxane Composite Membranes for Polymer Electrolyte Membrane Fuel Cells	1
Effect of Amine-modified Compatibilizer on Mechanical Properties and Dispersibility of Polyamide 6/CNF Composites	1
Rheological Behaviors of Ring-shaped Polymeric Liquids Under Flow Conditions	1
Gas-phase Copolymerization of Ethylene, Propene and Hydrogen under Controlled Atmosphere Composition in Reactor	1
Preparation of Biodegradable Poly(lactic acid)-Cellulose Composite Foam	1
Thermoelectric Enhancement of Spark-Plasma-Sintered Cu₂Te Induced by Graphene Sheets	1
Synthesis of Silicone-Acrylic Emulsions by ARGET ATRP Polymerization and Its Polymerization Kinetics	1
Nanoporous Polypropylene Membranes Prepared by a New Crystallization-based Method	1
Drug Release and Characterization of Multilayer Coated Contact Lenses with Natural Polysaccharides	1
Thermal and Mechanical Properties of Nano Silicon Carbide/Epoxy Composites by Surface Modification Using Oleic Acid, Imidazole, and Epoxy Silane	1
Development of Metformin Hydrochloride-Linagliptin Controlled Release Tablet Using Hydrophilic Polymers for Type 2 Diabetes in Asians	1
Study on Variable Stiffness Mechanism Using Magnetorheological Elastomer	1
Synthesizing Heat-resistant Activated Carbon Fibers Using Cellulose Fiber Wastes	1
Effects of ABS Resin Type and Carbon Fiber Content on Various Characteristics of Carbon Fiber/ABS Composites Fabricated Using Extruded and LFT Pellets	1
Fabrication and characterization of Thermoplastic Fiber-Reinforced Composites with Hybrid Fabrics	1
Development of On-off Switching Available Nozzle Injector for Generation of Multi-functional Ca-alginate Adsorbent	1
Study on the Effect of Cardanol-based Polyol Structure on the Properties of Rigid Polyurethane Foam	1
Polyurethane Fibers Bearing Nanoparticles of Polyacrylic Acid Grafted with Oleylamine and Zwitterion	1
Study on Colloidal Stability of Gold Nanoparticles Modified with Sugar Molecules	1
Cell Formation and Dimensional Stability According to Molding Conditions in Foam Injection Molding of PP Using a Chemical Blowing Agent	1
High Performance Ionic Polymer-Metal Composite Actuators Based on Nanopatterned Nafion by Thermal Imprinting Lithography	1
N-type Photoanodes for Photoelectrochemical Water Splitting Using a Newly Synthesized Conjugated Polymer as an Additive	1
Effect of Pigment Compatibility on Hydrolytic Degradation and Structure–Property Relationships in Ester-Based Thermoplastic Polyurethane	1
Docetaxel Nanocrystals Produced via an Amorphous Precursor	1
Preparation of an Injectable Alginate Hydrogel by Enzymatic Crosslinking Reaction and Application to Wound Healing Agents	1
Semicrystalline Ion Gels: Synthesis, Characterization, and Application in Strain Sensors	1
Preparation and Characterization of Blend Thermogel System for Biomedical Applications	1
Study on the Interfacial Stability of Rubber/copolymer Aramid by Surface Treatment of Copolymer Aramid Nano Fiber	1
Antimicrobial Property of Polydimethylsiloxane Film Coated with Aminosilanes	1
Study on the Rheological Properties and Fabrication of Branched PP with Divinylbenzene	1
Preparation and Characterization of Magnetized Microneedles for Magnetic Resonance Molecular Imaging	1
Fabrication of pH-responsive Hydrogel/Graphene Oxide Composites	1
Effect of Carbon Filler Master Batch on the Crystallization Behavior of Polyamide 6/Carbon Filler Composites	1

Mechanical and Swelling Properties of EPDM/SBR Nanocomposites Containing Resorcinol- and Hexamethylenetetramine-Modified HNTs	1
Tribological Properties of PAO40@SiO2/UHMWPE Composites Subjected to Heavy-loading Conditions	1
Study on the Curing Behavior and Properties of Epoxy Resin for Composites with Different Diluent System	1
Study on the Crosslinking System for Molded-In Foaming (MIF) Process	1
Pickering-type Phase Change Capsules for Skin-temperature-controllable Sunscreen Formulation	1
Study on Ultra-High Molecular Weight Polypropylene Compound Material Properties	1
Employment of Metal Oxide Nanoparticles to Enhance UV Resistance in Polyvinyl Chloride Films	1
Characteristic of Multicyclic Polymers via Brownian Dynamics Simulation	1
Fabrication and Characterization of Cell Spheroid Containing Porous Microparticles	1
Improvement in Thermal and Oil Resistance of Ethylene Propylene Diene Monomer Rubber Compounds by Chloroprene Rubber and Nitrile-Butadiene Rubber	1
High-Performance Zwitterionic Hydrogel Polymer Electrolytes for Aqueous Zinc-Ion Batteries: Superior Ionic Conductivity and Stability	1
Study of Mechanical Properties and Radiopacity of PVA/CNC/BaSO₄ Scaffold for Tissue Regeneration	1
Effects of High Intensity Ultrasound on the Properties of Recycled ABS/Recycled PETG Blends	1
Synthesis and Characterization of Cyclopentadithiophene and Pyridylthiadiazole-based Polymers with Single and Double Bonds	1
Scalable Fabrication of Electrochromic Films Using a Cobalt-Complexed Poly(N-vinylcarbazole) Metallopolymer	1
Synthesis of Cyclohexanedimethanol Pitch Based Plasticizer and Its Application to Poly(vinyl chloride) Fabrication	1
Effect of the Expandable Polystyrene on Acoustic Property of the Polyurethane Composite Foams	1
Phase Behavior and Rheological Properties of Complex Solution of Polyquaternium - 10 and Sodium Cocoyl Alaninate	1
Improvement of Mechanical Strength of Polyolefin Elastomer/Polystyrene Blends using High-Intensity Ultrasound	1
In Situ Photo-crosslinkable Biodegradable Tissue Adhesive for Wound Healing	1
Influence of Compatibilization and Internal Lubricant on the Mechanical and Thermo-mechanical Properties of PLA/TPU Compound	1
Carbon Nanotubes Modified by Ionic Liquid and Its Effect on Properties of Silicon Rubber Composites	1
Preparation and Characterization of Poly(vinyl alcohol)/Tannin Blend Film for Active Food Packaging	1
Studies on Mechanical Behaviour of Coconut Peduncle Fibers	1
Flame Retardant (FR) and Antimicrobial Properties of Bifunctional Polyguanidine Salt Additives for Polypropylene (PP) Membrane Materials	1
Synthesis and NIR Absorption Properties of Triethylene Glycol Substituted Metallo-Naphthalocyanines	1
Poly(azomethine) Based Micelles for Delivery of Caffeic Acid Phenethyl Ester	1
Kinetics and Synergistic Effects in the Pyrolysis Process of Hybrid Plastics and Product Analysis	1
Microbial and Enzymes That Can Regulate Plastic Degradation	1
Near-infrared Protection Materials Based on the Multiple Light Scattering from Highly Refractive Porous Hybrid Silica Particles	1
Reducing the Payne Effect of the Natural Rubber/Sepiolite Composite by Introducing Modified Palm Stearin	0
Effect of 4-Hydroxybutyrate Content on Physical Properties of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)	0
Study on Properties of Styrene-Butadiene Rubber Composites with Tanning-Treated Leather Waste	0
Biodegradable Polyurethane Scaffolds with Hard and Soft Compartments for Potential Bone-to-tendon Regeneration	0
Crystalline Structures and Transitions of Poly(phthalazinone ether sulfone)/Monomer Casting Nylon 6 Composites	0
Evaporative Crystallization System Based on Temperature-Responsive Hydrogel	0
Orientation Characteristics of Nylon 6/Polyketone Blends with Chain Extender	0
The Fabrication of Acrylic Acid and Boron Nitride Coated Nanotopographical Substrate for New Bone Formation	0
Fabrication of Bilayered Porous Membranes for Controlling Tissue Regeneration	0
Effects of Peroxides and Crosslinking Coagents on the Physical Properties of NBR Compounds	0
Preparation and Properties of Polyurethane Using Methoxylated Vegetable Oil as Chain Extender	0
Stress Relaxation Behaviors of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)	0
Antioxidant and Antifouling Activities of Acrylic Hydrogel Contact Lenses Coated with Phosphorylcholine Polymer and Natural Polyphenol	0
Simulation of Injection Molding Process Considering Rheological Properties of Polypropylenes	0
Influence of Blend Ratio on Long-Term Thermal Aging and Oil Resistance in Fluorosilicone/Silicone Rubber	0
Study on Structural Difference of Carbon Dot Synthesized from Polysaccharide with Different Functional Groups	0
Fabrication of Various Cellulose Microstructures via Oil-templated Regeneration of Cellulose Within a Simple Microfluidic System	0
Effect of Lignin Nanoparticle Addition on the Physicochemical Properties of Electrospun Poly(vinyl alcohol) Nanofibers	0
Drug Release Properties of Montelukast Imprinted Starch-based Biomaterials Adding Melanin as Photo-stabilizing Agent	0
Designing Rating Scale to Measure Daily Stain Prevention and Removal Capability and Its Application in New Polymeric Phosphate-Containing Whitening Mouthwashes	0
Review on the Utilization of Nanoparticles for Enhanced Performance of Polymer Electrolyte Membranes	0
Fabrication of 3D-Printed Organic–Inorganic Composite Temporary Crowns Using Dual Curing System	0
Technology for Eco-friendly Special Coating Materials for Replacement of Plastics: Preparation and Characterization of Poly(vinyl alcohol)-based Crosslinked Composite Films	0
Study on Recycling Plastic Monomers through Microwave Assisted Pyrolysis	0
Fabrication of Microfluidic Chips Containing Porous Membrane for Continuous Production of Lipid Nanoparticles	0
Synthesis and Adhesive Properties of N-Vinyl Pyrrolidone Based UV-Curing Acid-free Acrylic OCAs	0
Development of Prussian Blue Analogue Cathode Materials via Multi-ion Precipitation for Aqueous Zn-ion Battery	0
Electrochemical Deposition of Polyaniline on Nanopillar Array Films for High-performance pH Sensors	0
Formation of High-Dielectric Layers through Annealing of Polystyrene@Barium Titanate Arrays for Embedded Capacitor	0
Halloysite Nanotubes (HNTs)-Reinforced Natural Rubber (NR)/Ethylene-Propylene-Diene Monomer (EPDM) Composites	0
Effect of Ignition Position and Sample Thickness on Flame Spread in Flexible Polyurethane Foam	0
Impact of Simultaneous Silane and PCPA Grafting on the Thermal and Mechanical Properties of BN and GO Hybrid Composites	0
Characterization and Investigation of Electrical Properties of Epoxidized Soybean Oil-tri Salicyl Borate Polymer	0
Potential of 3D Bioprinting Techniques in Tissue Engineering	0
Electrochromic Characterization of WO₃@PEO Fiber by Controlling the Solution and Electrospinning Conditions	0
Effect of Surface Modification of Cellulose Nanofibers (CNFs) with Silane on the Properties of Rigid Polyurethane Foam (RPUF)	0
Studies on Optimizing Properties of Self-Healing Polyurethane Resins for Automotive Plastic Parts	0
Effect of Silane Modified Cellulose Nano Fiber on the Adhesion Properties Between Conductive Paste and PET Film	0
Effect of Radical Initiators on the Phase Structure and Rheological Properties of PLA/PBAT/Multi-walled Carbon Nanotube Composites	0
Coaxial Capillary Microfluidic Chips Modified with Poly(vinyl alcohol) for the Long-term Production of Uniform Oil Droplets	0
Systematic Study on the Electrical properties of Polymer Composites with Various Types of Conductive Fillers	0
Preparation of Dried Collagen Mask Sheet Based on Non-woven Mat via Syringeless Electrospinning	0
Analysis of Tribological Properties of Tin Powder Filled Polypropylene Composites with Taguchi Method	0
Biodegradation of Atelocollagen in the Articular Cavity	0
In situ Copolymerized Toughened Polymethyl Methacrylate (PMMA) with Highly Transparency for Support Film of Polarizers	0
Effect of Carbon Fiber Coating with PEI-Modified MWCNT on the Mechanical and Impact Properties of Carbon Fiber/ABS Composites: Comparisons of Extruded Pellet and LFT Pellet	0
Assembly of Flexible 3D Printed SCs from Thermoplastic Polyurethane Embedded Polypyrrole-CuO/MnO₂ Composites	0
Study on Thin Film Encapsulation Coating for Long-term Stable Organic Solar Cells	0
Different Biopolymers" Effects on the Evaluation and Characterization of Floating Tablets Prepared by Lyophilization Technique to Improve the Quality Control Parameters	0
Effect of Acryl-modified Poly(BA-co-GMA) on Physical Properties of Photo-curable Resin	0

Enhancing Bio PC/CNF Nanocomposite Performance Through Bio PC-g-MA Compatibilizer	0
Influence of Aqueous Carboxymethyl Cellulose Binder Viscosity on the Anode Performance in Lithium Ion Batteries	0
Study on the Physical Properties of Nylon66/Conductive Material (CM) Composites According to Master-batch and Composition of CM	0
Synthesis and Characterization of P(AA-co-GelMA) Hydrogel Particles for Oral Protein Drug Delivery Applications	0
Changes in Glioblastoma Cell Characteristics by a Strong Anionic Poly(Cresolsulfonic Acid) and a Cationic Pyrvinium Complex	0
Effect of Nanographene Oxide on the Mechanical Properties of EPDM/SBR Nano-composites	0
Curing Study of the New Silane Monomers and Their IPNs	0
Study on the Effect of Chemical Reaction Between Component Polymers and Gelation on the Physical Properties of Aliphatic Polyketone/polyamide 6 Blends	0
Biodegradable Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Film Coated with Tannic Acid for Active Food Packaging	0
Improvement of Mechanical Properties of DLP 3D Printouts Using Waterborne PUA/PEGDMA Mixed Oligomer Resin and Analysis of Filtration Characteristics of Resin Dilution	0
Cellulose Nanofiber-Polyethylenimine Nanocomposite-Based Coating Material with High Salt-Resistance for Solar-Desalination	0
Characteristics of Eco-Friendly Epoxy Resin Modified with Epoxidized Soybean Oil (ESO): Thermal, Mechanical, and Morphological Properties	0
Effect of Halloysite Nanotubes (HNTs) on Mechanical Properties of EPDM/NBR Blend-Nanocomposites	0
Composition Analysis of EVA/LDPE Blends Using Selective Dissolution and 1H NMR Spectroscopy	0
Investigation on Screw Extrusion-based 3D Printing Conditions of Carbon Fiber-Reinforced Nylon66	0
Functionalization of Graphene Oxide with POSS Derivatives for Improved Mechanical and Thermal Properties in Epoxy Nanocomposites	0
Effect of the Stabilizer in Improving the Characteristics of a Dure-Cure Adhesive	0
Enhanced Thermomechanical Properties of Stereo-complexed PLA Copoymer via In-situ Polymerization	0
Injectable Thermogel/Microsphere Hybrid Formulation System for Intratympanic Delivery of Dexamethasone	0
Improvement of Impact Strength of Phenyl-Terminated Polyphenylene Sulfide/Poly(ethylene-co-glycidyl methacrylate) Blends Using Carboxylation	0
Investigation of Core Density in Single Polymeric Globules Using Molecular Dynamics Simulations	0
Experimental and Numerical Investigation of Ballistic Impact Analysis on Kevlar Reinforced Polymer Composites and Shape Memory Alloy Sheet Reinforced Kevlar Epoxy Polymer Composites	0
Effect of Domain Size of n-Octadecane Phase Change Material In situ Shape-Stabilized in Alginate Matrix on Efficiency of Latent Heat	0
Recent Developments in an Organic Transistor-Based Gas Sensors	0
Enhancing Properties of Reclaimed Rubber via Supercritical Fluid-Assisted Shear Desulfurization and Calcium Carbonate Modification	0
Preparation and Characterization of Injectable Biohybrid Thermogel Scaffold for Cartilage Regeneration	0
Double-Layer Wound Dressing Consisting of an Upper Layer of Robust Polyurethane/Polycaprolactone and a Lower Layer of Biodegradable Polycaprolactone/Gelatin/Cellulose	0
Effects of Nanosilica on the Mechanical Properties and Swelling Resistance of EPDM/NBR Nanocomposites	0
Adjusting Water Absorption, Stimulus-Response and Adsorption Capacity for Toxic Heavy Metal Ions of Poly(acrylamide-co-potassium methacrylate) Hydrogel by Poly(ethylene glycol) Addition	0
Synthesis and Characterization of KKRK Peptide-PAMAM Dendrimer G2 Conjugates as Gene Carriers	0
A Novel Self-Healing Polyurethane with High Transparency and Strength: Effects of Multiple Supermolecular Forces	0
Investigation on Wear Behavior of PETG and PLA Parts Fabricated with Fused Deposition Modelling Under Different Wear Conditions	0
Study on the Manufacture of Flexible Transparent Wood Composite Panels Filled with Polymer in a Multi-porous Structure	0
Research on Rebamipide Sustained-release Tablets Using Solubilization Technology and Gastric Retention System	0
Design and Evaluation of Hexanoyl Glycol Chitosan-Based Ultra-Low Attachment Mesh-Pattern Culture Dishes for 3D Cell Culture	0
Synthesis and Characterization of Polymer Cement Mortar Using Hybrid Epoxy Resin Containing Mercaptopropyl Polyhedral Oligomeric Silsesquioxane (POSS-SH)	0
Particulate Reinforcements in Dicyanate Composites with Nanoporous Aluminum Fumarate as Reactive Filler: Thermal Properties	0
Study on the Crystallization Behavior and Rheological Properties of Nylon 6/Expanded Graphite Composites	0
Experimental and Computer Simulation of Stretch Blow Molding for Carbonated Soft Drink PET Bottle	0
Zea Mays Cob Extract-containing Polyurethane Nanofiber Webs	0
Catechol/aldehyde Moiety-based Bioadhesive Thermosensitive Poly(organophosphazenes) Hydrogel System	0
Chemical Sensor Device from Carbon Quantum Dot/Polypyrrole/Graphene Oxide Functionalized 3D Thermoplastic Polyurethane	0
Characteristics of Porous Silicone Hydrogel Contact Lens Crosslinked with Alginate and Metal Ions	0
Characteristic Variation of Ultraviolet-Cured Films on Structures and Molecular Weights of Photo-Reactive Acrylate and Methacrylate Monomers	0
Formulation Design of pH Adjusted Rebamipide Solid Dispersions for Improved Solubility	0
Swelling Ratio Determination of a Polymer Microbead via Video-Microscopy	0
Investigation on Cissus Quadrangularis Stem Fiber Reinforced Novel Polymeric Composite with Banana Chopped Fiber for Green Engineering Applications	0
Review on Utilization of Fly Ash for Improvement of Mechanical and Thermal Properties of Polymer Composites	0
Preparation of Poly(imide siloxane) Copolymer with a Low Siloxane Content and Thermal Characterization	0
Lifetime Prediction of Fluoroelastomer Using Accelerated Aging Test	0
Optimization Study on Vacuum-free Fabrication of OLEDs with Hybrid Electrodes by Using Thermal Behavior of Polymers	0
Preparation and Characterization of Polyurethane Using Cardanol-Based Bio-Polyol Obtained from One-Pot Synthetic Method	0
Quantitative Evaluation of the Yellowing Polyurethane Foam by Fourier-Transform Infrared (FTIR) Spectroscopy	0
Non-isothermal Crystallization of Poly(3-hydroxybutyrate-co-4-hydroxybutyrate)	0
Highly Porous Biocomposite Scaffolds Fabricated by Chitosan/Alginate/Diatom for Tissue Engineering	0
Preparation and Properties of Cellulose Nanocrystals Based Self-healing Polyurethane	0
Analysis of the Mechanical Properties of Epoxy Resin Matrix Composites upon Multi-scale Synergistic Strengthening and Toughening	0
Effect of Silane Coupling Agent on Mechanical Properties of Glass Fiber Reinforced Polyurethane Foam	0
Synthesis and Polarized Electroluminescence of Mesogenic Polyfluorenes Coordinated with Iridium	0
Development and Physical Characterization of a Composite Laminate Aramid/Epoxy Manufactured by the Vacuum Bag Method	0
Polypyrrole/Poly(1-(2-carboxyehtyl)pyrrole) Bilayered Composite Scaffold for Cell Adhesion	0
Study on the Physical Properties of PP/Kenaf Fiber Composite According to Fiber Length and Grafted Degree of Maleic Anhydride	0
Preparation and Characterization of Novel Phosphorus-based Flame Retardant for Poly(lactic acid)	0
Study of Manufacturing Process on Pellet Type Ultra-High Molecular Weight Polypropylene	0
Molecular Structure, Vibrational, Spectral Investigation and Quantum Chemical DFT Calculations of Poly(N-isopropyl acrylamide-co-nbutyl methacrylate)	0
Preparation of Poly( γ - glutamic acid) Hydrogels with Ionic Liquids and Their Application as a Strain Sensor	0
Hydrophilic/Oleophobic Layer-by-Layer Films Functionalized with Fluorosurfactant and SiO₂ Nanoparticles	0
Preparation of MXenes/epoxy Composites and Curing Kinetics Study	0
Visible-light-responsive Cr/WO₃ Doped Titanium Dioxide Photocatalysis Transparent Coating Films Produced by Sol-gel Process	0
Mold Shrinkage of PPS Resin According to Injection Molding Condition for the Rectangular Specimen with Rectangular Hole	0
Effect of Modified Nanographene Oxide on the Mechanical and Swelling Properties of Silicone Rubber Nanocomposites	0
Effect of Surface Modified Halloysite Nanotubes (mHNTs) on the Mechanical Properties and Swelling Resistance of EPDM/NBR Nanocomposites	0
Effect of Fluorine Substitution on the Physical and Optical Characteristics of BDT-ttTPD Copolymers for Organic Semiconductors	0
Mechanical Properties at Room and Elevated Temperatures According to the Thickness Ratio of Coextruded Film Using Polycarbonate and Acrylic Resin	0
Influence of Water Absorption Behavior on Mechanical and Tribological Performance of Polymer Materials	0
Experimental and Simulation Study of Thermoforming Using PC/PMMA Multilayer Films	0
Fabrication of Porous EVOH Separator Membrane Using NIPS Process for Next-Generation Lithium-ion Battery	0
Physical Properties of Polyurethane Sheets Prepared with Synthesized Soybean Oil Polyol	0
Effect of BA/HPA Acrylic Oligomer on the Migration of PVC DINCH Plasticizer	0
Supercapacitor Combined Gas Sensor system from Carbon Quantum Dot/Polypyrrole/Graphene Oxide Functionalized Polyurethane Foam Matrixes	0
Effect of the Ratio of Oxidizing Agent to Monomer for Polyaniline Synthesis on the Activity of Catalyst for Oxygen Reduction Reaction in Anion Exchange Membrane Fuel Cells	0
Physical Properties of Water-Based Acryl Wig Pressure Sensitive Adhesive	0
Characteristics of Waxy Oil from Waste High-Density Polyethylene via In-Situ Catalytic Pyrolysis	0
Antibacterial Gelatin Composite Films Incorporated with Chitosan-Coated Cinnamon Essential Oil Liposome Nanoparticles	0
Pyridoquinolinedione as a New Building Block for Semiconducting Polymer Donors in Organic Solar Cells	0
Preparation and Physical Properties of a Silicone Hydrogel Contact Lens with a High-water-content Cellulose Surface Layer	0
Reinforcing Resins with Fumed Silica for DLP 3D Printing of Abrasion-resistant Parts	0
Effect of Hollow Microspheres as Reinforcing Fillers on Natural Rubber Composites	0
Sandwich Structured Heat Dissipation Composite Consisting of Carbon Nanotube/Epoxy Resin and Boron Nitride/Epoxy Resin	0
Natural Evaporation Rate of Toluene in Aqueous Solution for Correct Estimation of Adsorption Performance	0
Study on the Surface Form of Damaged Soft Skin and Test Method	0
Development of Measurement Technology for Uptake and Diffusivity of Hydrogen Gas in Peroxide-Crosslinked EPDM Polymer Composites Blended with Fillers using Image Analysis Algorithm of Cylinder Water L	0
Preparation of Porous Hydrogels Using Blowing Agents and Application to Contact Lenses	0
Preparation, Characterization of Chitosan-Coated/Uncoated Boron Nanoparticles and In-Vitro Evaluation of Their Antimicrobial Effects	0
Clamshell-shaped Droplet-based Electricity Generator with a Water Droplet Confined in a Wedge Plate	0