Journal of Power Sources

Article	Citations
Thermal measurement of a unitized regenerative fuel cell during mode switching using thin film sensors	392
In-situ electrochemical polymerization of dopamine at cell-electrode interface enhances the extracellular electron transfer efficiency of Shewanella	316
Electronic structure and absorption characteristics of two-dimensional perovskites Csn+1PbnCl3n+1 (n = 1, 2, and 4): Co-regulation of the number of layers and Ge doping concentration	262
Dynamic surface protective layer on a metallic lithium anode with electronic and ionic dual conductivity	235
Nanodiamonds assisted synthesis of porous hollow carbon microsphere as an efficient anode in lithium-ion battery over 13000 cycles at 20 C	232
A glass fiber reinforced crosslinked polyurethane-based composite electrolyte with high mechanical strength and large ion conductivity	232
Exploring interface role of aromatic ligands in nonlinear evolutions of tin-based perovskites’ photoelectric and mechanical properties	204
Halogen enabled aqueous flow cells for large-scale energy storage: Current status and perspectives	194
The collaborative effect of Ni3S2-NiO heterojunction and porous carbon network modified lithium-sulfur battery separator for effectively inhibiting polysulfides shuttle	186
Eco-friendly upgradation for the enhancement of performance and stability of perovskite solar cells	178
A multi-site strategy for boosting Li-CO2 batteries performance	175
A new insight into high-performance NiS2@g-C3N4 anode for lithium-ion batteries – a DFT calculation and ex-situ XPS approach	156
The construction of Newton's cradle type ions jumping path between layered double hydroxide interlayer for high-performance alkaline zinc batteries	146
Visualization of oxide ion incorporation in CO2 electrolysis on LSCM-based cathodes of solid oxide electrolysis cell	143
Nanostructured cobalt-based metal-organic framework/cadmium sulfide electrocatalyst for enhanced oxygen evolution reaction and anion exchange membrane-based water electrolysis: Synergistic effect	143
High loading Si-based electrodes reinforced by in-situ polymerization for high-energy lithium-ion batteries	143
Accelerated stress test study on CO-tolerant PtRu anode catalysts for reformate PEM fuel cells	136
Coaxial spiral structural polymer/reduced graphene oxide composite as a high-performance anode for potassium ion batteries	132
Hard carbons from automotive shredder residue (ASR) as potential anode active material for sodium ion battery	131
The precise building units modulation of iron-bismuth sulfide triple-level hierarchical structure for enhanced supercapacitor performance	131
Electrochemical characterization and discharge performance of AZ31, AZ61 and AZ91 alloys as anodes for seawater battery	126
A new strategy of rapid room-temperature synthesis of magnesium-based metal-organic framework as a precursor for multipurpose performance energy material	122
Nano-crystalline Fe3V3O8 material as an efficient advanced anode for energy storage applications	118
Heterostructured nickel/vanadium nitrides composites for efficient electrocatalytic hydrogen evolution in neutral medium	116
Targeted stabilization of solid electrolyte interphase and cathode electrolyte interphase in high-voltage lithium-metal batteries by an asymmetric sustained-release strategy	115

Identifiability study of lithium-ion battery capacity fade using degradation mode sensitivity for a minimally and intuitively parametrized electrode-specific cell open-circuit voltage model	115
Self-grown layered double hydroxide nanosheets on bimetal-organic frameworks-derived N-doped CoOx carbon polyhedra for flexible all-solid-state rechargeable Zn-air batteries	114
Future potential for lithium-sulfur batteries	113
Dual-modified Co-free Ni-rich LiNi0.94Mg0.01Al0.05O2 cathode materials for enhancing Li-ion battery performance	112
Solvent-driven morphological and electrochemical enhancements in catalyst layers for proton exchange membrane water electrolysis	111
In-situ construction of 3D lithiophilic conduction space for dendrite-free lithium deposition	110
Constructing solvation structure of dual anions to mitigate the corrosion of lithium bis(fluorosulfonyl)imide-based electrolyte at elevated temperature	109
A physically consistent electric circuit to interpret the galvanostatic charge-discharge curves of electric double layer capacitors	109
MoS2 nanoparticles anchored on exfoliated NiFe-LDH nanosheets via electrodeposition as multifunctional electrodes for energy conversion and storage applications	106
Battery prognostics and health management from a machine learning perspective	104
High performance crack-free single crystalline NCM-622 via Mg-doping as a high voltage cathode for lithium-ion batteries	104
Sustainable pyrolytic carbon negative electrodes for sodium-ion batteries	103
Dual-interface passivation to improve the efficiency and stability of inverted flexible perovskite solar cells by in-situ constructing 2D/3D/2D perovskite double heterojunctions	101
Electrochemical performance of metal nitride coated titanium bipolar plate for proton exchange membrane water electrolyser	99
Investigating proton exchange membrane water electrolyzers (PEMWE) performance losses through the galvanostatic intermittent titration technique (GITT) for electrolyzers	98
Model-assisted analysis and prediction of activity degradation in PEM-fuel cell cathodes	98
A new diagnostic indicator for lithium-ion batteries via electrochemical impedance spectroscopy: Harnessing the highest frequency peak in distribution of relaxation times	98
Porous carbon from verbena straw with self-doped O/N and its high-performance aqueous and flexible all-solid-state supercapacitors	98
A light-weight sponge catalyst for hydrogen generation from liquid hydrogen carriers	98
Characterization and scale-up of serpentine and interdigitated flow fields for application in commercial vanadium redox flow batteries	97
“There is plenty of energy at the bottom”: A spectral conversion approach for upconversion-powered water-splitting PEC cell	97
Enhanced simulated annealing algorithm for 3D reconstruction of cathode catalyst layers in proton exchange membrane fuel cell	96
Digital twinning of multi-physics field performance of faceted novel snake coil flow field proton exchange membrane fuel cells	96
Flexible and stretchable high performance enzymatic biofuel cells implantable in tube-type artificial blood vessel kit	96
ICFormer: A Deep Learning model for informed lithium-ion battery diagnosis and early knee detection	96
Boosting the kinetics of bromine cathode in Zn–Br flow battery by enhancing the electrode adsorption of the droplet of bromine sequestration agent/polybromides complex	95
Theoretical model and control-parameter classification analysis for solid oxide fuel cell systems with cooling air bypass into burner	94
A review of organic sulfur applications in lithium-sulfur batteries	94
Pre-enriched electrodes, bioelectrochemical processes, and biomass retention collectively enhance methane production in integrated microbial electrolysis cell-anaerobic digestion system	93
Operando XRD analysis of self-discharge induced by elevated temperature for sulfide-based all-solid-state Li-ion batteries	93
Improved reversibility and kinetics of oxygen redox reaction in Na2Mn3O7 by dual-site regulation strategy	92
Engineering strong electronegative nitrogen-rich porous organic polymer for practical durable lithium-sulfur battery	92
Tailoring barium doped cobalt-free nanocomposite cathodes for high-performance solid oxide fuel cells	92
Systematic and predictive trends to chromium poisoning in solid oxide fuel cell cathodes	91
Increase the efficiency of lead sulfide colloidal quantum dots solar cells by incorporating In2O3 and NiO interlayers	90
Early-stage lifetime prediction for lithium-ion batteries: Linear regression - ensemble learning hybrid model based on impedance spectroscopy geometry	90
Experimental and simulation study on CO2 transport mechanism during CO2 electroreduction	88
Structural regulation of ferrocene-doping Cu-MOFs for enhancing thermoelectric properties of single-walled carbon nanotube-based composite films	88
Stable Zn metal anode enabled via ferroelectric nanotube arrays	88
Cathode water management towards improved performance of protonic ceramic fuel cells	87
High-performance flexible thermoelectric generator for self-powered wireless BLE sensing systems	87
A novel method of EIS application in online fault diagnosis of high-temperature PEMFC with CNN	86
Carbon dioxide reduction in solid oxide electrolyzer cells using transition metals infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds	86
Thermal plasma synthesis towards upscaling of multi-cation lithium nickel manganese cobalt oxide cathodes	86
Molecular design of high-voltage electrolytes for supercapacitors via steric hindrance effects	85
Influence of defects on enhancing lithium diffusivity in crystalline silicon anodes for fast charging lithium-ion batteries	85
Nanoporous Pd cathode with outstanding methanol resistance for direct methanol fuel cell	85
Incorporation of nitrogen and oxygen in carbon: A highly tuned electrochemistry with facile synthesis and its influence on optical and electrode performance in supercapacitors	84
Interfacial hydrogen-bonding networks of pyrene tetracarboxylic ionic liquid at Pd-electrolyte accelerate ethanol oxidation	84
Cost-effective process for large-area solid oxide cells with optimally thinned electrolyte	84

Research progress of aqueous binders for sulfur cathode in lithium-sulfur battery	84
Physical limitations of electrode conditions for graphite/Si blended anodes toward high-energy Li-ion batteries	84
Glyoxal-based electrolytes in potassium-ion capacitors	84
MnO2 quantum dots uniformly dotted on MOF-5 derived carbon nanowires as anode materials with superior lithium storage performance	83
Engineering peripheral S-doped atomic Fe-N4 in defect-rich porous carbon nanoshells for durable oxygen reduction reaction and Zn-air batteries	83
Physical-based reduced model of lithium-ion batteries dedicated to observer design for embedded applications	82
Fabrication of visualized NO gas sensing system operable at near room temperature	81
From theory to operation: A systematic loss analysis framework for fuel cell systems	81
Metallic Co and FeNi alloy hybrid nanoparticles immobilized into N-doped graphene-like carbon nanosheets as an efficient bifunctional oxygen electrocatalyst for rechargeable Zn-air batteries	80
In situ construction of 3D crossing-linked gel polymer electrolyte toward high performance and safety lithium metal batteries	79
Impact of applied potential range on corrosion behavior of stainless steel oxygen evolution electrode under potential cycle loading	79
Constructing effective interface for room-temperature Beta-Al2O3 based sodium metal batteries	78
P-N heterojunction to boost photoelectrochemical H2 evolution of CdS/AgVO3 nanorod arrays photoanode	78
Hybrid porous carbon/polypyrrole composite from recycled coffee grounds as an active electrode material for lithium-ion batteries	78
A novel nonlinearity-aware adaptive observer for estimating surface concentration and state of charge of lithium-ion batteries	78
MoS2–CoS2 heteronanosheet arrays coated on porous carbon microtube textile for overall water splitting	78
On the formation and properties of amorphous and crystalline Li3-yBay/2OCl electrolytes	78
Characteristic times in the infinite charge landscape of the universal capacitor	77
Accurately control the micropore/mesopore ratio to construct a new hierarchical porous carbon with ultrahigh capacitance and rate performance	77
Electrochemical-mechanical coupled interfacial degradation model of Ternary polymer composite cathodes in all-solid-state batteries	77
Dual carbon confining SnO2 nanocrystals as high-performance anode for sodium-ion batteries	77
Fluorinated functional groups enhanced composite in-situ gel electrolytes for high voltage cathode of quasi solid-state lithium battery	77
A novel MXene coated liquid crystal display anode derived from a futile computer monitor for microbial fuel cell application	75
A tailor-made deep eutectic solvent for 2.2 V wide temperature-tolerant supercapacitors via optimization of N,N-dimethylformamide/water co-solvents	75
Low pressure cycling of solid state Li-ion pouch cells based on NMC – Sulfide – Nanosilicon chemistry	75
Malonic-acid-functionalized fullerene enables the interfacial stabilization of Ni-rich cathodes in lithium-ion batteries	75
Introducing titanium hydride on porous transport layer for more energy efficient water electrolysis with proton exchange membrane	74
Dendrite-free and long-standing aqueous zinc metal battery achieved by in-situ grown hydrophilic Coordination Supramolecular Networks	74
Understanding mechanisms of fast sodium storage kinetics for MXene/MoS2@C in ether electrolytes	74
Synthesis of high-performance single-crystal LiNi0.8Co0.1Mn0.1O2 cathode materials by controlling solution super-saturation	73
Multifunctional hybrid interface enables controllable zinc deposition for aqueous Zn-ion batteries	73
Dopant-free carrier-selective contact silicon solar cells: Materials, structures and stability	73
Unlocking the limitations of layered LiNiO2: Insights from DFT simulations on its viability as a cathode material for aqueous Lithium-ion batteries	72
3D-printed flexible flow-field plates for bendable polymer electrolyte membrane fuel cells	72
A computational workflow for the simulation of solid state battery electrodes from manufacturing to electrochemical performance	72
Humidity-independent NO2 gas sensors based on ZnO-NiOFx nanocomposites and the synergistic humidity-immune effect of fluorine doped NiO	72
Temperature-dependence of calcination processes of Ni-rich layered oxides	72
Sodium-ion conducting pseudosolid electrolyte for energy-dense, sodium-metal batteries	71
Fuel cell flow path design for improved efficiency and power density	71
Ligand field regulation of δ-MnO2 by polyanion modification enables extended potential window in supercapacitors	71
Impact of nickel electrode geometry on the electrochemical performance and bubble dynamics of a zero-gap alkaline electrolyzer	71
Editorial Board	71
Corrigendum to “Cycle parameter dependent degradation analysis in automotive lithium-ion cells”. Journal of Power Sources, Volume 506, 15 September 2021, 230227	71
Diagnostic and prognostic for prescriptive maintenance and control of PEMFC systems in an industrial framework	71
A sulfonated polyimide containing flexible aliphatic segments with high chemical stability for vanadium redox flow battery application	71
Real-time capable transient model of liquid water dynamics in proton exchange membrane Fuel Cells	70
Flexible high-capacity and long-cyclability hydrogel batteries enabled by polyvalent vanadium ion redox chemistry	70
Impact of pore-forming by PSF in the anode on power generation and mass transport characteristics of direct formic acid fuel cell	70
Deciphering the mechanism of concentrated electrolyte for lithium metal anode via cryogenic electron microscopy	70
Sulfonated Poly(Phenylene sulfone) blend membranes finding their way into proton exchange membrane fuel cells	70
Ultrastable Na-TiS2 battery enabled by in situ construction of gel polymer electrolyte	70
Editorial Board	70
High-efficiency zinc thermal charging supercapacitors enabled by hierarchical porous carbon electrodes	70
Lithium exchange across a lithium-less coating for high energy cathodes	69
Editorial Board	69
Engineering building blocks of covalent organic frameworks for boosting capacitive charge storage	68
A chemical-mechanical ex-situ aging of perfluorosulfonic-acid membranes for fuel cells: Impact on the structure and the functional properties	68
The electrochemical oxidation of butanediol isomers in an alkaline direct liquid fuel cell	68
Towards in-situ detection of nascent short circuits and accurate estimation of state of short in Lithium-Ion Batteries	68
Editorial Board	67
An insulating material in a structured host enables sustainable formation of a granular Li metal for highly durable Li metal battery	67
Heterogeneous pore-scale model analysis of micro-patterned PEMFC cathodes	67
Inconsistency analysis and power allocation of the stack in multi-stack solid oxide fuel cell system	67
State of temperature detection of Li-ion batteries by intelligent gray box model	66
Regulation of dual-ion batteries via the defects design in carbon electrode based on the different storage behaviors of PF6− and Li+	66
Ultra-stable air electrodes based on different carbon materials for zinc-air battery	66
Enhancing hydrogen storage efficiency: Computational insights into scandium-decorated 2D polyaramid	66
Phase field modeling of dendrite growth mechanism of Mg and Li in electrodeposition	66
Pitch-based quasi-dry thick electrode fabrication process of NCM cathode for lithium-ion batteries	66
Operando pH measurements revealing the promoted Zn2+ intercalation kinetics of pre-intercalated V2O5 cathode in aqueous zinc metal batteries	66
High-performance aqueous sodium-ion storage using scalable and surfactant-free flower-like manganese oxide/reduced graphene oxide electrodes	65
High-capacity semi-organic polymer batteries: From monomer to battery in an all-aqueous process	65
Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials	64
Effective approaches to produce high performance single-walled carbon nanotubes/platinum based hybrid films by inserting thermoelectric material with high seebeck coefficient	64
In-situ analysis of anode atmosphere in a flat-tube solid oxide fuel cell operated with dry reforming of methane	64
Multiple heteroatom-doped cobalt sulfoselenide@C yolk-shell microsphere as excellent anode materials for sodium-ion batteries and their conversion reaction mechanism with sodium ions	63
Understanding slurry formulations to guide solution-processing of solid electrolytes	63
Determination of a sodium-ion cell entropy-variation	63
In operando detection of Lithium plating via electrochemical impedance spectroscopy for automotive batteries	63
A hybrid system integrating solid oxide fuel cell and thermo-radiative-photovoltaic cells for energy cascade utilization	63

Dopant-grading proposal for polysilicon passivating contact in crystalline silicon solar cells	63
Zwitterionic surfactant–stabilized ionogel electrolytes with high ionic conductivity for lithium secondary batteries	63
Ionic conductive cellulose-based hydrogels for Al-air batteries: Influence of the charged-functional groups on the electrochemical properties	62
Graphene electrode functionalization for high performance hybrid energy storage with vanadyl sulfate redox electrolytes	62
Binder-free tin (IV) oxide coated vertically aligned carbon nanotubes as anode for lithium-ion batteries	62
Advances in low-temperature solid oxide fuel cells: An explanatory review	62
N, O co-doped carbon nanoflakes decorated carbon cloth as flexible self-supported sulfur host for lithium-sulfur batteries	61
Real-time and non-contact estimation of state of charge for lithium-ion battery using laser ultrasonics	61
Preparation of high-performance anode materials for sodium-ion batteries using bamboo waste: Achieving resource recycling	61
A PVB electrolyte film and its application in electrochromic laminated glass	61
A novel anode of gold nanoparticle coated Au nanorod arrays for nonenzymatic glucose fuel cells	61
Unraveling stress mechanisms in Ni-rich NMC particles: The dominance of anisotropic deformation over diffusion	60
Scalable chemical prelithiation of SiO/C anode material for lithium-ion batteries	60
Features of cycling of lithium-sulfur cells with electrolytes based on sulfolane solutions of LiPF6 and LiBF4	60
Local structure and conversion chemistry of high-entropy oxides as Li-ion anodes	59
Rational design of hierarchical crystalline/amorphous hybrid copper tetracyanoquinodimethane and CuWO4 hetero-arrays as effective electrode materials for supercapacitors	59
Fluoroethylene carbonate as co-solvent for Li(Ni0.8Mn0.1Co0.1)O2 lithium-ion cells with enhanced high-voltage and safety performance	59
Experimental study of the effect of different pulse charging patterns on lithium-ion battery charging	59
Diffusional lithium trapping as a failure mechanism of aluminum foil anodes in lithium-ion batteries	58
Perovskite solar cells on Sn-doped In2O3 electrodes with artificially controlled (222) preferred orientation	58
A kinetic study on cobalt-free high-nickel layered oxide cathode materials for practical lithium-ion batteries	58
Engineering bifunctional electrocatalysts for rechargeable Zn-Air battery by confining Co–Zn–Mn in flower-structured carbon	58
Along-flow-path gradient flow field enabling uniform distributions of reactants for redox flow batteries	58
Improving ionic conductivity of garnet solid-state electrolytes using Gradient boosting regression optimized machine learning	58
A surrogate-assisted uncertainty quantification and sensitivity analysis on a coupled electrochemical–thermal battery aging model	58
Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis	58
Operando odd random phase electrochemical impedance spectroscopy as a promising tool for monitoring lithium-ion batteries during fast charging	58
Efficient regeneration of waste LiFePO4 cathode material by short process low temperature plasma assisted nitrogen doped technology	57
Performance-optimized diatom-SiO	57
TinyML models for SoH estimation of lithium-ion batteries based on Electrochemical Impedance Spectroscopy	57
Experimental investigation of steam-induced oxidation of nickel-based electrodes using fixed-frequency electrochemical impedance spectroscopy	57
3D hierarchical NiCo₂O₄@WO₃/Cu₂S heterostructures and biomass-derived carbon electrodes for high-performance all-solid-state supercapacitors	57
Kinetic modelling of thermal decomposition in lithium-ion battery components during thermal runaway	57
Biological small molecule interface-modification fostering resilient interfacial chemistry for silicon-based anodes	57
Ligand engineering of metal-organic frameworks as efficient electrocatalysts for wide-temperature lithium-sulfur batteries	56
Experimental validation of vapor-phase direct methanol fuel cell with Pt-Ru/Zeolite electrocatalyst	56
Enhancing stability PVDF-HFP-based ternary gel electrolyte for dendrite-free lithium metal anodes	56
Rational design of a double-layer Janus solid electrolyte for high voltage lithium metal battery	56
Editorial Board	56
Construction of a dense and N-rich solid electrolyte interface for dendrite-free lithium metal batteries	56
Calcining the mixture having lithium titanate (LTO) and CuBr in air to significantly boost the electrochemical performance of the commercial LTO	56
Pressure-dependent growth of RF-sputtered WS2 nanostructures for enhanced hydrogen production via photoelectrochemical water splitting	55
Engineering high-concentration electrolyte with high ionic conductivity and solvation structure regulation enables high-performance Li/CFx primary batteries	55
Cavitand-porous organic polymer and PAN hybrid electrospun fiber derived heteroatoms rich activated carbon fiber for VRFB application	55
Functionally graded La0.6Sr0.4Co0.2Fe0.8O3−δ hollow fiber membrane for oxygen separation: fabrication, upscaling, and stability	55
Enhancing tunneling, microstructural morphology, and electrochemical performance of carbon fiber substituted ternary alloys (Mg-Ni-Ti) synthesized via mechanical alloying for hydrogen storage applicat	55
Electrostatic self-assembly of copper oxide nano catchers boosting the efficiency of oxygen reduction in microbial fuel cell	55
Enhanced K0.5Mn2O4 hollow nano-spheres cathode for aqueous zinc ion battery	55
A full-wave multifunctional battery equalization circuit based on inductor-inductor-capacitor converter for battery strings	55
Multifunctional 4-azidobenzoic acid interface engineering enables high-efficiency carbon-based perovskite solar cells	55
Covalent organic frameworks with silsesquioxane and quinoline units as multifunctional separator modifier for stable Lithium–Sulfur batteries	54
Biomass-based carbon nanofibers enhanced by carbon quantum dots for high-performance supercapacitors and moist-electric generators	54
Rod-type handheld hybrid nanogenerator for mechanical energy harvesting and self-powered speed sensing applications	54
Balancing miscibility and crystallinity enables high-efficiency organic solar cells via ternary copolymerization	54
Perovskite-type Bi3TiNbO9 two-dimensional metal oxide as negative electrode material for sodium-ion batteries	54
Overlooked issues on oxidation state analysis in electrode materials by X-ray photoelectron spectroscopy	54
Erratum to “Hydrogen generation behaviors from hydrolysis of cold-welding free magnesium-calcium hydride-expanded graphite composites” [J. Power Sources 595 (2024) 234004]	54
Fe, Cu bimetallic precursor-driven quaternary active sites boost oxygen reduction / evolution reaction bifunctional catalysts	54
High-performance flexible supercapacitor device based on catechol functionalized Azo-anthraquinone	54
Ab initio investigation of layered MoS2 electrodes for aqueous zinc batteries via interlayer engineering	53
Cost-effective Prussian blue analogue composite proton exchange membranes for low humidity fuel cell operation	53
Experimental study on degradation of proton exchange membrane fuel cells for eco-friendly heavy equipment	53
Thin-film flexible zinc hybrid electrochemical device integrating three chemical pathways	53
Cation-deficient TiO2/polypyrrole heterojunctions: An efficient bidirectional electrocatalyst for enhanced lithium-sulfur batteries	53
Sulfur-doped hollow C@CoP nanosphere modified separator for enhancing polysulfides anchoring and conversion in Li–S batteries	53
Enhancing puncture voltage of La0.8Sr0.2Ga0.8Mg0.2O3-δ solid electrolyte membrane by improving CO2 reduction kinetics	52
Transparent photovoltaic-based photocathodes for see-through energy systems	52
High performance phenothiazine-based battery materials achieved by synergistic steric blocking and extended conjugation	52
Water cluster characteristics of fuel cell gas diffusion layers with artificial microporous layer crack dilation	52
Intra/extracellular transmembrane electron transfer for bioelectric enhancement mediated by in-situ bio-FeS and polypyrrole coating	52
Regulation preferred crystal plane and oxygen vacancy of CoWO4 with morphology remolding to boost electrochemical performances for battery-supercapacitor hybrid device electrode	52
Dual-molecule enhanced MXene films for high specific capacitance in supercapacitors	52
Volume and thickness change of NMC811|SiO52
Y doped La2Ce2O7 proton conducting SOFC electrolyte membrane: Thin film deposition via EPD, electrochemical performance and DRT analysis	52
A high energy density supercapacitor fabricated with aqueous polymer electrolyte based on soybean protein isolate grafted by polyacrylic acid	52
Effects of Mn concentration on durability of Fe-Cr ferritic steels dispersed with La2O3 for solid oxide fuel cell interconnects	52
Achieving high performance and durability with ultra-low precious metal nanolayer on porous transport layer for PEMWE application	51
High-performance aqueous potassium ion asymmetric supercapacitors based on tunable 2D transition metal oxides	51
Ion transport regulation of polyimide separator for safe and durable Li-metal battery	51
Nitrogen and sulfur co-doped hierarchically mesoporous carbon derived from biomass as high-performance anode materials for superior sodium storage	51
Covalent integration of NH2-MIL-53(Al) into SPEEK for enhanced proton exchange membrane performance	51
Various types of A.C conduction mechanism models for solid polymer electrolytes (SPE): A review	51
Holistic design principles for flow batteries: Cation dependent membrane resistance and active species solubility	51
Heterogeneous Cr-doped Co3S4/NiMoS4 bifunctional electrocatalyst for efficient overall water splitting	51
Optimizing catalyst layer structure design for improved water management of anion exchange membrane fuel cells	51
Quantification of lithium deposition under mechano-electrochemical coupling effect	51
Cold chain solution for prefabricated foods enabled by highly scalable, low-cost and high-performance NaCl@Na2SO4 eutectic brine phase change cold storage gels	51
Effect of asphalt component distribution characteristics in layered porous carbon on performance of supercapacitors	51
Transfer-enhanced cathode with noncorrosive inorganic-based composite additive for durable proton exchange membrane fuel cells	51
Solid-solution iodine levers the interlayer storage of BiOBr electrode via optimizing the preferred crystal orientation for aqueous batteries	50
Boosted Li+ migration in LiPON electrolyte via introducing Ti-based bridge for solid-state thin film batteries	50
A fast-kinetics ternary composite cathode design for high-rate aqueous zinc-ion batteries	50
Online adaptive anode potential-controlled fast charging of lithium-ion cells using a validated electrochemical model-based virtual reference electrode	50
Phytic acid-induced self-assembled chitosan gel-derived N, P–co-doped porous carbon for high-performance CO2 capture and supercapacitor	50
Cu-doped MOF-derived α-Fe2O3 coatings on carbon fiber fabric as Li-ion and Na-ion battery anodes for potential structural batteries	50