Journal of Power Sources

Article	Citations
Understanding slurry formulations to guide solution-processing of solid electrolytes	380
Dynamic surface protective layer on a metallic lithium anode with electronic and ionic dual conductivity	307
Targeted stabilization of solid electrolyte interphase and cathode electrolyte interphase in high-voltage lithium-metal batteries by an asymmetric sustained-release strategy	255
Ultrastable Na-TiS2 battery enabled by in situ construction of gel polymer electrolyte	227
Electronic structure and absorption characteristics of two-dimensional perovskites Csn+1PbnCl3n+1 (n = 1, 2, and 4): Co-regulation of the number of layers and Ge doping concentration	224
Corrigendum to “Cycle parameter dependent degradation analysis in automotive lithium-ion cells”. Journal of Power Sources, Volume 506, 15 September 2021, 230227	223
Lithium exchange across a lithium-less coating for high energy cathodes	198
Nanodiamonds assisted synthesis of porous hollow carbon microsphere as an efficient anode in lithium-ion battery over 13000 cycles at 20 C	180
A glass fiber reinforced crosslinked polyurethane-based composite electrolyte with high mechanical strength and large ion conductivity	180
High-performance aqueous sodium-ion storage using scalable and surfactant-free flower-like manganese oxide/reduced graphene oxide electrodes	175
Temperature-dependence of calcination processes of Ni-rich layered oxides	170
A review of organic sulfur applications in lithium-sulfur batteries	152
N, O co-doped carbon nanoflakes decorated carbon cloth as flexible self-supported sulfur host for lithium-sulfur batteries	143
Ultra-stable air electrodes based on different carbon materials for zinc-air battery	139
Thermal measurement of a unitized regenerative fuel cell during mode switching using thin film sensors	138
Sustainable pyrolytic carbon negative electrodes for sodium-ion batteries	130
In-situ electrochemical polymerization of dopamine at cell-electrode interface enhances the extracellular electron transfer efficiency of Shewanella	129
Diagnostic and prognostic for prescriptive maintenance and control of PEMFC systems in an industrial framework	129
Fuel cell flow path design for improved efficiency and power density	127
Binder-free tin (IV) oxide coated vertically aligned carbon nanotubes as anode for lithium-ion batteries	126
Dual-modified Co-free Ni-rich LiNi0.94Mg0.01Al0.05O2 cathode materials for enhancing Li-ion battery performance	125
In-situ analysis of anode atmosphere in a flat-tube solid oxide fuel cell operated with dry reforming of methane	118
Editorial Board	116
Dual carbon confining SnO2 nanocrystals as high-performance anode for sodium-ion batteries	110
A kinetic study on cobalt-free high-nickel layered oxide cathode materials for practical lithium-ion batteries	110

Diffusional lithium trapping as a failure mechanism of aluminum foil anodes in lithium-ion batteries	108
Preparation of high-performance anode materials for sodium-ion batteries using bamboo waste: Achieving resource recycling	106
Electrochemical-mechanical coupled interfacial degradation model of Ternary polymer composite cathodes in all-solid-state batteries	106
Synthesis of high-performance single-crystal LiNi0.8Co0.1Mn0.1O2 cathode materials by controlling solution super-saturation	106
Future potential for lithium-sulfur batteries	106
Exploring interface role of aromatic ligands in nonlinear evolutions of tin-based perovskites’ photoelectric and mechanical properties	105
Local structure and conversion chemistry of high-entropy oxides as Li-ion anodes	105
Hybrid porous carbon/polypyrrole composite from recycled coffee grounds as an active electrode material for lithium-ion batteries	105
State of temperature detection of Li-ion batteries by intelligent gray box model	101
Cathode water management towards improved performance of protonic ceramic fuel cells	100
Malonic-acid-functionalized fullerene enables the interfacial stabilization of Ni-rich cathodes in lithium-ion batteries	100
“There is plenty of energy at the bottom”: A spectral conversion approach for upconversion-powered water-splitting PEC cell	100
Efficient regeneration of waste LiFePO4 cathode material by short process low temperature plasma assisted nitrogen doped technology	96
Porous carbon from verbena straw with self-doped O/N and its high-performance aqueous and flexible all-solid-state supercapacitors	96
A novel nonlinearity-aware adaptive observer for estimating surface concentration and state of charge of lithium-ion batteries	95
Nano-crystalline Fe3V3O8 material as an efficient advanced anode for energy storage applications	94
Towards in-situ detection of nascent short circuits and accurate estimation of state of short in Lithium-Ion Batteries	94
Kinetic modelling of thermal decomposition in lithium-ion battery components during thermal runaway	93
Introducing titanium hydride on porous transport layer for more energy efficient water electrolysis with proton exchange membrane	93
High-capacity semi-organic polymer batteries: From monomer to battery in an all-aqueous process	93
Multiple heteroatom-doped cobalt sulfoselenide@C yolk-shell microsphere as excellent anode materials for sodium-ion batteries and their conversion reaction mechanism with sodium ions	93
Humidity-independent NO2 gas sensors based on ZnO-NiOFx nanocomposites and the synergistic humidity-immune effect of fluorine doped NiO	93
Impact of nickel electrode geometry on the electrochemical performance and bubble dynamics of a zero-gap alkaline electrolyzer	92
Sulfonated Poly(Phenylene sulfone) blend membranes finding their way into proton exchange membrane fuel cells	92
Determination of a sodium-ion cell entropy-variation	91
The collaborative effect of Ni3S2-NiO heterojunction and porous carbon network modified lithium-sulfur battery separator for effectively inhibiting polysulfides shuttle	91
Real-time capable transient model of liquid water dynamics in proton exchange membrane Fuel Cells	91
Halogen enabled aqueous flow cells for large-scale energy storage: Current status and perspectives	91
Physical-based reduced model of lithium-ion batteries dedicated to observer design for embedded applications	90
The precise building units modulation of iron-bismuth sulfide triple-level hierarchical structure for enhanced supercapacitor performance	90
From theory to operation: A systematic loss analysis framework for fuel cell systems	90
Cost-effective process for large-area solid oxide cells with optimally thinned electrolyte	89
In situ construction of 3D crossing-linked gel polymer electrolyte toward high performance and safety lithium metal batteries	89
Interfacial hydrogen-bonding networks of pyrene tetracarboxylic ionic liquid at Pd-electrolyte accelerate ethanol oxidation	89
Engineering building blocks of covalent organic frameworks for boosting capacitive charge storage	88
Research progress of aqueous binders for sulfur cathode in lithium-sulfur battery	88
Fluorinated functional groups enhanced composite in-situ gel electrolytes for high voltage cathode of quasi solid-state lithium battery	87
Constructing effective interface for room-temperature Beta-Al2O3 based sodium metal batteries	87
Engineering peripheral S-doped atomic Fe-N4 in defect-rich porous carbon nanoshells for durable oxygen reduction reaction and Zn-air batteries	87
A new strategy of rapid room-temperature synthesis of magnesium-based metal-organic framework as a precursor for multipurpose performance energy material	87
MnO2 quantum dots uniformly dotted on MOF-5 derived carbon nanowires as anode materials with superior lithium storage performance	85
A novel anode of gold nanoparticle coated Au nanorod arrays for nonenzymatic glucose fuel cells	85
Influence of defects on enhancing lithium diffusivity in crystalline silicon anodes for fast charging lithium-ion batteries	84
The electrochemical oxidation of butanediol isomers in an alkaline direct liquid fuel cell	84
On the formation and properties of amorphous and crystalline Li3-yBay/2OCl electrolytes	84
Editorial Board	83
Editorial Board	83
Molecular design of high-voltage electrolytes for supercapacitors via steric hindrance effects	82
Glyoxal-based electrolytes in potassium-ion capacitors	82
A chemical-mechanical ex-situ aging of perfluorosulfonic-acid membranes for fuel cells: Impact on the structure and the functional properties	82

Editorial Board	82
Investigating proton exchange membrane water electrolyzers (PEMWE) performance losses through the galvanostatic intermittent titration technique (GITT) for electrolyzers	81
Impact of pore-forming by PSF in the anode on power generation and mass transport characteristics of direct formic acid fuel cell	81
A novel method of EIS application in online fault diagnosis of high-temperature PEMFC with CNN	81
Fabrication of visualized NO gas sensing system operable at near room temperature	81
Graphene electrode functionalization for high performance hybrid energy storage with vanadyl sulfate redox electrolytes	81
Nanoporous Pd cathode with outstanding methanol resistance for direct methanol fuel cell	80
Physical limitations of electrode conditions for graphite/Si blended anodes toward high-energy Li-ion batteries	80
Incorporation of nitrogen and oxygen in carbon: A highly tuned electrochemistry with facile synthesis and its influence on optical and electrode performance in supercapacitors	79
A novel MXene coated liquid crystal display anode derived from a futile computer monitor for microbial fuel cell application	78
Visualization of oxide ion incorporation in CO2 electrolysis on LSCM-based cathodes of solid oxide electrolysis cell	78
Thermal plasma synthesis towards upscaling of multi-cation lithium nickel manganese cobalt oxide cathodes	78
An insulating material in a structured host enables sustainable formation of a granular Li metal for highly durable Li metal battery	78
Electrochemical characterization and discharge performance of AZ31, AZ61 and AZ91 alloys as anodes for seawater battery	77
Metallic Co and FeNi alloy hybrid nanoparticles immobilized into N-doped graphene-like carbon nanosheets as an efficient bifunctional oxygen electrocatalyst for rechargeable Zn-air batteries	77
Deciphering the mechanism of concentrated electrolyte for lithium metal anode via cryogenic electron microscopy	77
Enhancing hydrogen storage efficiency: Computational insights into scandium-decorated 2D polyaramid	76
Operando pH measurements revealing the promoted Zn2+ intercalation kinetics of pre-intercalated V2O5 cathode in aqueous zinc metal batteries	76
A sulfonated polyimide containing flexible aliphatic segments with high chemical stability for vanadium redox flow battery application	76
Inconsistency analysis and power allocation of the stack in multi-stack solid oxide fuel cell system	76
Ligand field regulation of δ-MnO2 by polyanion modification enables extended potential window in supercapacitors	75
Theoretical model and control-parameter classification analysis for solid oxide fuel cell systems with cooling air bypass into burner	75
Improving ionic conductivity of garnet solid-state electrolytes using Gradient boosting regression optimized machine learning	74
Ionic conductive cellulose-based hydrogels for Al-air batteries: Influence of the charged-functional groups on the electrochemical properties	74
Zwitterionic surfactant–stabilized ionogel electrolytes with high ionic conductivity for lithium secondary batteries	74
Carbon dioxide reduction in solid oxide electrolyzer cells using transition metals infiltrated into Gd0.1Ce0.9O1.95 (GDC10) scaffolds	74
Tailoring barium doped cobalt-free nanocomposite cathodes for high-performance solid oxide fuel cells	73
3D-printed flexible flow-field plates for bendable polymer electrolyte membrane fuel cells	73
Engineering bifunctional electrocatalysts for rechargeable Zn-Air battery by confining Co–Zn–Mn in flower-structured carbon	73
A computational workflow for the simulation of solid state battery electrodes from manufacturing to electrochemical performance	73
Enhanced simulated annealing algorithm for 3D reconstruction of cathode catalyst layers in proton exchange membrane fuel cell	73
Pre-enriched electrodes, bioelectrochemical processes, and biomass retention collectively enhance methane production in integrated microbial electrolysis cell-anaerobic digestion system	72
Engineering strong electronegative nitrogen-rich porous organic polymer for practical durable lithium-sulfur battery	72
Improved reversibility and kinetics of oxygen redox reaction in Na2Mn3O7 by dual-site regulation strategy	71
A surrogate-assisted uncertainty quantification and sensitivity analysis on a coupled electrochemical–thermal battery aging model	71
Fluoroethylene carbonate as co-solvent for Li(Ni0.8Mn0.1Co0.1)O2 lithium-ion cells with enhanced high-voltage and safety performance	71
Operando XRD analysis of self-discharge induced by elevated temperature for sulfide-based all-solid-state Li-ion batteries	70
Heterostructured nickel/vanadium nitrides composites for efficient electrocatalytic hydrogen evolution in neutral medium	70
Systematic and predictive trends to chromium poisoning in solid oxide fuel cell cathodes	70
Characterization and scale-up of serpentine and interdigitated flow fields for application in commercial vanadium redox flow batteries	70
Flexible high-capacity and long-cyclability hydrogel batteries enabled by polyvalent vanadium ion redox chemistry	70
Nanostructured cobalt-based metal-organic framework/cadmium sulfide electrocatalyst for enhanced oxygen evolution reaction and anion exchange membrane-based water electrolysis: Synergistic effect	70
Atomically dispersed Pt single sites and nanoengineered structural defects enable a high electrocatalytic activity and durability for hydrogen evolution reaction and overall urea electrolysis	70
Features of cycling of lithium-sulfur cells with electrolytes based on sulfolane solutions of LiPF6 and LiBF4	69
Regulation of dual-ion batteries via the defects design in carbon electrode based on the different storage behaviors of PF6− and Li+	69
Along-flow-path gradient flow field enabling uniform distributions of reactants for redox flow batteries	69
Lab-based X-ray micro-computed tomography coupled with machine-learning segmentation to investigate phosphoric acid leaching in high-temperature polymer electrolyte fuel cells	69
In operando detection of Lithium plating via electrochemical impedance spectroscopy for automotive batteries	69
Accelerated stress test study on CO-tolerant PtRu anode catalysts for reformate PEM fuel cells	68
A tailor-made deep eutectic solvent for 2.2 V wide temperature-tolerant supercapacitors via optimization of N,N-dimethylformamide/water co-solvents	68
Dopant-free carrier-selective contact silicon solar cells: Materials, structures and stability	68
MoS2–CoS2 heteronanosheet arrays coated on porous carbon microtube textile for overall water splitting	68
Heterogeneous pore-scale model analysis of micro-patterned PEMFC cathodes	68
Dopant-grading proposal for polysilicon passivating contact in crystalline silicon solar cells	67
Pitch-based quasi-dry thick electrode fabrication process of NCM cathode for lithium-ion batteries	67
Increase the efficiency of lead sulfide colloidal quantum dots solar cells by incorporating In2O3 and NiO interlayers	67
A hybrid system integrating solid oxide fuel cell and thermo-radiative-photovoltaic cells for energy cascade utilization	67
A new diagnostic indicator for lithium-ion batteries via electrochemical impedance spectroscopy: Harnessing the highest frequency peak in distribution of relaxation times	66
Understanding mechanisms of fast sodium storage kinetics for MXene/MoS2@C in ether electrolytes	66
Multifunctional hybrid interface enables controllable zinc deposition for aqueous Zn-ion batteries	66
Real-time and non-contact estimation of state of charge for lithium-ion battery using laser ultrasonics	66
ICFormer: A Deep Learning model for informed lithium-ion battery diagnosis and early knee detection	66
Stable Zn metal anode enabled via ferroelectric nanotube arrays	66
Structural regulation of ferrocene-doping Cu-MOFs for enhancing thermoelectric properties of single-walled carbon nanotube-based composite films	66
Characteristic times in the infinite charge landscape of the universal capacitor	65
Flexible and stretchable high performance enzymatic biofuel cells implantable in tube-type artificial blood vessel kit	65
Scalable chemical prelithiation of SiO/C anode material for lithium-ion batteries	65
Low pressure cycling of solid state Li-ion pouch cells based on NMC – Sulfide – Nanosilicon chemistry	65
Unlocking the limitations of layered LiNiO2: Insights from DFT simulations on its viability as a cathode material for aqueous Lithium-ion batteries	64
A PVB electrolyte film and its application in electrochromic laminated glass	64
High loading Si-based electrodes reinforced by in-situ polymerization for high-energy lithium-ion batteries	64
3D hierarchical NiCo₂O₄@WO₃/Cu₂S heterostructures and biomass-derived carbon electrodes for high-performance all-solid-state supercapacitors	64
Operando odd random phase electrochemical impedance spectroscopy as a promising tool for monitoring lithium-ion batteries during fast charging	64
Battery prognostics and health management from a machine learning perspective	64
Early-stage lifetime prediction for lithium-ion batteries: Linear regression - ensemble learning hybrid model based on impedance spectroscopy geometry	64
Experimental and simulation study on CO2 transport mechanism during CO2 electroreduction	63
Model-assisted analysis and prediction of activity degradation in PEM-fuel cell cathodes	63
Perovskite solar cells on Sn-doped In2O3 electrodes with artificially controlled (222) preferred orientation	63
Rational design of hierarchical crystalline/amorphous hybrid copper tetracyanoquinodimethane and CuWO4 hetero-arrays as effective electrode materials for supercapacitors	63
Self-grown layered double hydroxide nanosheets on bimetal-organic frameworks-derived N-doped CoOx carbon polyhedra for flexible all-solid-state rechargeable Zn-air batteries	62

P-N heterojunction to boost photoelectrochemical H2 evolution of CdS/AgVO3 nanorod arrays photoanode	62
Effective approaches to produce high performance single-walled carbon nanotubes/platinum based hybrid films by inserting thermoelectric material with high seebeck coefficient	62
Coaxial spiral structural polymer/reduced graphene oxide composite as a high-performance anode for potassium ion batteries	62
Digital twinning of multi-physics field performance of faceted novel snake coil flow field proton exchange membrane fuel cells	61
Impact of applied potential range on corrosion behavior of stainless steel oxygen evolution electrode under potential cycle loading	61
Phase field modeling of dendrite growth mechanism of Mg and Li in electrodeposition	61
Electrochemical performance of metal nitride coated titanium bipolar plate for proton exchange membrane water electrolyser	61
Experimental study of the effect of different pulse charging patterns on lithium-ion battery charging	61
Hard carbons from automotive shredder residue (ASR) as potential anode active material for sodium ion battery	60
Accurately control the micropore/mesopore ratio to construct a new hierarchical porous carbon with ultrahigh capacitance and rate performance	60
Performance-optimized diatom-SiO	60
TinyML models for SoH estimation of lithium-ion batteries based on Electrochemical Impedance Spectroscopy	60
Reversible OP4 phase in P2–Na2/3Ni1/3Mn2/3O2 sodium ion cathode	59
Toward high-performance sodium storage cathode: Construction and purification of carbon-coated Na3V2(PO4)2F3 materials	59
Identifiability study of lithium-ion battery capacity fade using degradation mode sensitivity for a minimally and intuitively parametrized electrode-specific cell open-circuit voltage model	59
Dual-interface passivation to improve the efficiency and stability of inverted flexible perovskite solar cells by in-situ constructing 2D/3D/2D perovskite double heterojunctions	59
High-efficiency zinc thermal charging supercapacitors enabled by hierarchical porous carbon electrodes	59
A multi-site strategy for boosting Li-CO2 batteries performance	58
A new insight into high-performance NiS2@g-C3N4 anode for lithium-ion batteries – a DFT calculation and ex-situ XPS approach	58
High-performance flexible thermoelectric generator for self-powered wireless BLE sensing systems	58
Boosting the kinetics of bromine cathode in Zn–Br flow battery by enhancing the electrode adsorption of the droplet of bromine sequestration agent/polybromides complex	58
The construction of Newton's cradle type ions jumping path between layered double hydroxide interlayer for high-performance alkaline zinc batteries	58
Sodium-ion conducting pseudosolid electrolyte for energy-dense, sodium-metal batteries	58
A light-weight sponge catalyst for hydrogen generation from liquid hydrogen carriers	58
Dendrite-free and long-standing aqueous zinc metal battery achieved by in-situ grown hydrophilic Coordination Supramolecular Networks	58
Thin-film flexible zinc hybrid electrochemical device integrating three chemical pathways	57
Advances in low-temperature solid oxide fuel cells: An explanatory review	57
Holistic design principles for flow batteries: Cation dependent membrane resistance and active species solubility	57
Experimental validation of vapor-phase direct methanol fuel cell with Pt-Ru/Zeolite electrocatalyst	57
Electrostatic self-assembly of copper oxide nano catchers boosting the efficiency of oxygen reduction in microbial fuel cell	56
Balancing miscibility and crystallinity enables high-efficiency organic solar cells via ternary copolymerization	56
Covalent organic frameworks with silsesquioxane and quinoline units as multifunctional separator modifier for stable Lithium–Sulfur batteries	56
A fast-kinetics ternary composite cathode design for high-rate aqueous zinc-ion batteries	56
Synergistic thermal expansion reduction in cobalt-containing perovskite cathodes for solid oxide fuel cells	55
Fluorinated Pr2NiO4+δ as high-performance air electrode for tubular reversible protonic ceramic cells	55
Engineering high-concentration electrolyte with high ionic conductivity and solvation structure regulation enables high-performance Li/CFx primary batteries	55
Intra/extracellular transmembrane electron transfer for bioelectric enhancement mediated by in-situ bio-FeS and polypyrrole coating	55
Cavitand-porous organic polymer and PAN hybrid electrospun fiber derived heteroatoms rich activated carbon fiber for VRFB application	55
Scalable thick Ni-rich layered oxide cathode design for high energy/power balanced lithium-ion battery	55
Interface problems, modification strategies and prospects of Ni–rich layered oxide cathode materials in all–solid–state lithium batteries with sulfide electrolytes	55
Water cluster characteristics of fuel cell gas diffusion layers with artificial microporous layer crack dilation	54
Enabling uniform Li deposition behavior by introducing a NO3−-based ionic liquid additive into carbonate electrolyte for high-voltage Li metal batteries	54
Solid-solution iodine levers the interlayer storage of BiOBr electrode via optimizing the preferred crystal orientation for aqueous batteries	54
Enhancing tunneling, microstructural morphology, and electrochemical performance of carbon fiber substituted ternary alloys (Mg-Ni-Ti) synthesized via mechanical alloying for hydrogen storage applicat	54
Enhancing multi-type fault diagnosis in lithium-ion battery systems: Vision transformer-based transfer learning approach	54
Degradation and recovery of solid oxide fuel cell performance by control of cathode surface acidity: Case study – Impact of Cr followed by Ca infiltration	54
Polyethersulfone-based thick polymer-supported graphene sheet for high energy density lithium-ion battery	54
High performance phenothiazine-based battery materials achieved by synergistic steric blocking and extended conjugation	54
Transparent photovoltaic-based photocathodes for see-through energy systems	53
Preparation of highly-crystalline large silicon nanoparticles for high-performance lithium-ion batteries in room temperature ionic liquid systems	53
Surface strain on prismatic Li-ion cells: Thermo-mechanical modelling, calibration and validation with gauges	53
Ion transport regulation of polyimide separator for safe and durable Li-metal battery	53
High pressure molding Li10SnP2S12 ceramic electrolyte with low-grain-boundary-resistance for all-solid-state batteries	53
A high energy density supercapacitor fabricated with aqueous polymer electrolyte based on soybean protein isolate grafted by polyacrylic acid	53
Biomass-based carbon nanofibers enhanced by carbon quantum dots for high-performance supercapacitors and moist-electric generators	53
Multifunctional non-stoichiometric tungsten oxides: Synthesis, properties and application	53
Re-understanding the galvanostatic intermittent titration technique: Pitfalls in evaluation of diffusion coefficients and rational suggestions	53
Optimizing catalyst layer structure design for improved water management of anion exchange membrane fuel cells	53
China's energy efficiency improvement considering renewable energy substitution: Applying a dynamic two-stage undesirable non-radial directional distance function	53
Synergistic enhancement to high-performance Zn2+ hybrid supercapacitors by N/P-doped porous hollow carbon nanospheres	53
Predictive co-optimization of speed planning and powertrain energy management for electric vehicles driving in traffic scenarios: Combining strengths of simultaneous and hierarchical methods	52
Fluorinated ether-based co-solvent electrolytes for lithium-metal batteries: High ionic conductivity and suppressed dissolution of fragmented anions	52
Regulation preferred crystal plane and oxygen vacancy of CoWO4 with morphology remolding to boost electrochemical performances for battery-supercapacitor hybrid device electrode	52
Insights into the structural degradation and dual modification to enhance structural and cycling stability in LiNi0.8Co0.1Mn0.1O2	52
Erratum to “Hydrogen generation behaviors from hydrolysis of cold-welding free magnesium-calcium hydride-expanded graphite composites” [J. Power Sources 595 (2024) 234004]	52
Exploring nanoscale engineering for elevated electrochemical performance: A multiscale experimental and computational investigation of Co3O4@TiO2 nanocomposites	52
Experimental investigation of steam-induced oxidation of nickel-based electrodes using fixed-frequency electrochemical impedance spectroscopy	51
Low-frequency experimental method for measuring the electric double-layer capacitances of multi-cell electrolysis stacks based on equivalent circuit model	51
A stable aqueous ammonium ion hybrid supercapacitor based on pre-intercalated MnOx electrodes and ammonium sulphate electrolyte	51
Disentangling plasmonic and catalytic effects in a practical plasmon-enhanced Lithium–Oxygen battery	51
Boosted Li+ migration in LiPON electrolyte via introducing Ti-based bridge for solid-state thin film batteries	51
Toward boosted alkaline hydrogen evolution reaction: Covalent organic framework-derived N-doped carbon for highly dispersed cobalt nanoparticles	51
Covalent integration of NH2-MIL-53(Al) into SPEEK for enhanced proton exchange membrane performance	51
Fe, Cu bimetallic precursor-driven quaternary active sites boost oxygen reduction / evolution reaction bifunctional catalysts	51
Copper doped lanthanum hydroxide nanorods as a low temperature processable hole transport material for perovskite solar cells	51
Mn-doped K0.23V2O5 nanobelts as cathode materials for high performance flexible all-in-one zinc ion batteries	51
Dual-molecule enhanced MXene films for high specific capacitance in supercapacitors	51
High-capacity π-conjugated organic anode with multielectron redox for zinc-metal-free zinc-ion batteries	50
Editorial Board	50
Editorial Board	50
0D-2D S-scheme CdS/WO3 catalyst for efficiently boosting CO2 photoreduction	50
Editorial Board	50
Biological small molecule interface-modification fostering resilient interfacial chemistry for silicon-based anodes	50
Essential analysis of cyclic voltammetry of methanol electrooxidation using the differential electrochemical mass spectrometry	50
Editorial Board	50
Overlooked issues on oxidation state analysis in electrode materials by X-ray photoelectron spectroscopy	50
The coupled removal of heavy metals from electroplating wastewater induced stable electricity generation during long-time discharging in a three-chamber thermally regenerative battery	49
Structural evolution dependency on depth-of-discharge in VO2(B) Li-ion battery electrodes	49
Enhancing stability PVDF-HFP-based ternary gel electrolyte for dendrite-free lithium metal anodes	49
Ab initio investigation of layered MoS2 electrodes for aqueous zinc batteries via interlayer engineering	49
Construction of a dense and N-rich solid electrolyte interface for dendrite-free lithium metal batteries	49
Rational design of a double-layer Janus solid electrolyte for high voltage lithium metal battery	49
Cation-deficient TiO2/polypyrrole heterojunctions: An efficient bidirectional electrocatalyst for enhanced lithium-sulfur batteries	49
Li pre-doping technique using perforated electrodes for the cells with a rubber-derived sulfur composite cathode	49
Various types of A.C conduction mechanism models for solid polymer electrolytes (SPE): A review	49