International Journal of Energy Research

Article	Citations
Guest editorial for the special issue on: energy technology advancements	277
Improved kinetics of reduction of alkaline water on the g‐CN‐ supported transition metal oxide/boride hetero‐interface: A case study	198
Prediction of Equivalence Ratio in Combustion Flame Using Chemiluminescence Emission and Deep Neural Network	139
Multiobjective Optimization and Machine Learning Algorithms for Forecasting the 3E Performance of a Concentrated Photovoltaic-Thermoelectric System	121
Towards High Solar Contribution in Hybrid CSP-Combined Cycle Gas Turbine Plants	114
Investigation of a building‐integrated solar photovoltaic‐wind‐battery hybrid energy system: A case study	111
Steam and electrical power generation by a hybrid photovoltaic/parabolic dish concentrator using beam splitter technology	104
Artificial intelligence‐based tri‐objective optimization of different demand load patterns on the optimal sizing of a smart educational buildings	100
Integration of supercapacitor with solar cell based on NiO 2 and CdS nanopill	96
Novel synthetic strategy for a nanostructured metal hydroxysulfide‐C and its initial electrochemical investigation as a new anode material for potassium‐ion batteries	94
Application of new hybrid models based on artificial neural networks for modeling pyrolysis yields of Atriplex nitens S.	91
Simple fabrication of Ni nanodots decorated Ni/Ketjen black composite for sulfur host in lithium‐sulfur battery	89
A novel thermal power unit with feedwater pump turbine driven by thermal energy storage system: System construction and performance evaluation	87
Elucidation of impressive photovoltaic performances upon the treatment of various aminosilanes over plasmonic photoelectrodes of dye‐sensitized solar cells	86
A comparative study of deep learning neural network architectures and sensitivity analyses for the prediction of color changes in biochar	86
Electrochemical properties of yolk‐shell structured cobalt hydroxy chloride‐carbon composite as an anode for lithium‐ion batteries	83
Compositional variability as a major hindering factor in continuous biohydrogen production from cassava starch wastewater: Possible solutions for complex substrates	82
A new satellite hydrogen‐oxygen microthruster combustion chamber: An experimental and numerical study	82
Heat transfer augmentation of lithium‐ion battery packs by incorporating an interrupted fin arrangement	81
Modified search and rescue optimization algorithm for identifying the optimal parameters of high efficiency triple‐junction solar cell/module	79
On‐line characterization of PEM's oxygen permeability for PEM fuel cell by embedded microelectrode method	79
Energy saving and performance analysis of air‐cooled photovoltaic panels	76
Spent Tea Leaves and Coffee Grounds as Potential Biocathode for Improved Microbial Electrosynthesis Performance	75
Infiltrated Nanofiber-Based Nanostructured Electrodes for Solid Oxide Fuel Cells	75
Potential of molasses substrate for bioelectricity production in microbial fuel cell with the help of active microbial community	74

A novel triple‐cycle system based on high‐temperature proton exchange membrane fuel cell, thermoelectric generator, and thermally regenerative electrochemical refrigerator for power and cooling cogene	73
Predictive Model for Solar Insolation Using the Deep Learning Technique	73
Regenerative cooling capacity of hydrogenated carene under supercritical environment	72
Multi‐Scale Geomechanical Modelling of Unconventional Shale Gas: The Implication on Assisting Geophysics–Geology–Engineering Integration	71
Remarkable Conductivity and Durability of Anion Exchange Membrane With Poly(Fluorene‐Terphenyl Piperidinium) Incorporating Graphene Oxide	71
A review on theoretical studies of structural and optoelectronic properties of FA‐based perovskite materials with a focus on FAPbI3	71
Peanut Oil Cake Biomass‐Derived Hierarchical Porous Carbon by Dual Step Activation as Potential Electrodes for Fabrication of Prototype Symmetric Supercapacitor Device	69
CFD Analysis of a Latent Thermal Storage System (PCM) for Integration with an Air‐Water Heat Pump	69
Charging Station Sizing and Placement for EV Docking Station in Smart Grid	69
Investigation of Overburden Collapse Behavior and Optimization of Sectional Coal Pillar Widths in Deep‐Buried Fully‐Mechanized Top‐Coal Caving Mining Faces	68
Thermocatalytic and solar thermochemical carbon dioxide utilization to solar fuels and chemicals: A review	66
Coordinated operation strategy for hydrogen energy storage in the incremental distribution network	66
Enhancing Heat Transfer of Photovoltaic Panels with Fins	65
Optimal Investment Strategy Analysis of On‐Site Hydrogen Production Based on the Hydrogen Demand Prediction Using Machine Learning	64
Mechanical Strain‐Modulated Multifunctional Pr‐Doped BaTiO3 Thin Film for Luminescence Sensing and Piezoelectric Energy‐Harvesting Applications	63
Early Impacts of COVID‐19 Pandemic on the Crude Oil Prices and Demand in Sub‐Saharan Africa: A Review	61
Development of Mixed Matrix Membranes by Using NH2‐Functionalized UiO‐66 and [APTMS][AC] Ionic Liquid for the Separation of CO2	59
Wind Farm Layout Optimization Based on Dynamic Opposite Learning‐Enhanced Sparrow Search Algorithm	59
Multicriteria Decision‐Making Evaluation of Blade Element Momentum Theory Algorithms for Optimal Design of Small‐Scale HAWT Blades	58
Insights Into Lithium‐Ion Battery Cell Temperature and State of Charge Using Dynamic Electrochemical Impedance Spectroscopy	57
Advancements in Model Parameter Estimation for Proton Exchange Membrane Fuel Cells via Enhanced Artificial Hummingbird Algorithm	57
Recent Research Trends on Zeolitic Imidazolate Framework-8 and Zeolitic Imidazolate Framework-67-Based Hybrid Nanocomposites for Supercapacitor Application	57
Numerical analysis and machine learning for battery thermal performance cooled with different fluids	56
KOH mediated hydrothermally synthesized hexagonal‐CoMn2O4 for energy storage supercapacitor applications	56
Silver nanoparticles‐polydopamine‐wax gourd: An antimicrobial solar evaporator with enhanced steam generation	56
Prediction on enhanced electrochemical discharge machining behaviors of zirconia‐silicon nitride using hybridDNNbased spotted hyena optimization	55
Efficient Electrocatalysts for Hydrogen Evolution Reaction Using Heteroatom-Doped MXene Nanosheet	54
Electrochemical Performance of Spongy Snowballs of O3-NaFeO2@SnO: Cathodes for Sodium Ion Batteries	53
The impact of a trace amount of water in an electrolyte on the performance of Li‐ion batteries—An empirical kinetic model approach	53
Charge scheduling framework with multiaggregator collaboration for direct charging and battery swapping station in a coupled distribution‐transportation network	52
Co/Zn‐based bimetallic MOF ‐derived hierarchical porous Co/C composite as cathode material for high‐performance lithium‐air batteries	52
Proposal and evaluation of a solar‐based polygeneration system: Development, exergoeconomic analysis, and multi‐objective optimization	51
Thermal Analysis of MHD‐Modified Hybrid Nanofluid Flow Inside Convergent/Divergent Channel With Heat Generation/Absorption and Viscous‐Ohmic Dissipation	51
Designing a Revenue Forecast Scheme for Analog Ensemble Method Applied Solar PV Forecasting in South Korea	51
Electrochemical performance of Quercus infectoria as a supercapacitor carbon electrode material	49
How to increase the catalytic efficacy of platinum‐based nanocatalysts for hydrogen generation from the hydrolysis of ammonia borane	49
The metaheuristic optimization of the mechanical properties of sustainable energies using artificial neural networks and genetic algorithm: A case study by eggshell fine waste	49
Effect of pore structures in nickel‐based porous transport layers for high‐performance and durable anion‐exchange membrane water electrolysis	49
A Review of Research on the Thermo‐Force Characteristics of Scramjet Engine Wall Based on Neural Networks	49
Bioaugmented polyaniline decorated polylactic acid nanofiber electrode by electrospinning technique for real wastewater‐fed MFC application	49
(Fe, Ni, Co) 9 S 8 @ CS catalyst decorated on N‐dope	49
Mixed metal chalcogenide shell with carbon interlayer wrapped 3D NiCo 2 O 4	48
Estimation of fast pyrolysis bio‐oil properties from feedstock characteristics using rough‐set ‐based machine learning	48
A review of bipolar plates materials and graphene coating degradation mechanism in proton exchange membrane fuel cell	48
Techno‐economic feasibility of hydrogen based electric vehicle charging station: A case study	47
Improving the solidification performance of a shell‐and‐tube latent‐heat thermal energy storage unit using a connected‐Y ‐shaped fin	47
Significant enhancement on electrochemical performance of Ni‐rich LiNi 0.8 Co 0.1 Mn 0.1 O	47
Radial Basis Function Surrogate Model-Based Optimization of Small Light-Weight Lead-Bismuth Reactor Core	46
Revealing the effects of conductive carbon materials on the cycling stability of rechargeable Zn‐air batteries	46
Issue Information	46

Spontaneous Lithiophilic and Lithium-Ion Conductive Functional Layer Formation Enabled by Solution-Casted Zinc Nitride for Highly Stable Lithium Metal Electrode in Carbonate Electrolyte	46
Optimal Solution of Peer-to-Peer and Peer-to-Grid Trading Strategy Sharing between Prosumers with Grid-Connected Photovoltaic/Wind Turbine/Battery Storage Systems	46
Numerical Evaluation of Coolability Limits of External Reactor Vessel Cooling Using an Improved Thermal-Hydraulic System Analysis Code	46
Quantum Chemical Characteristics of Additives That Enable the Use of Propylene Carbonate-Based Electrolytes	46
Paving the Way for Low‐Carbon Shipping Fuels in Long‐Haul Trade Routes	45
Parametric Analysis and Optimization of a Dual‐Fuel‐Fired Boiler for Power Generation Using the Taguchi Design Approach	45
Research on Characteristics of Hydrogen Dynamic Leakage and Combustion at High Pressure	45
Highly stable bulk heterojunction organic solar cells based on asymmetric benzoselenadiazole‐oriented organic chromophores	45
Biolubricant production via esterification and transesterification processes: Current updates and perspectives	44
Enhancing power in a grid‐connected system using unified power quality conditioner with black widow optimization‐based floating photovoltaic system	44
The Role of Nuclear Energy in Reducing Greenhouse Gas (GHG) Emissions and Energy Security: A Systematic Review	44
Electrospun conductive carbon nanofiber hosts for stable zinc metal anode	44
Investigation on the Heat-to-Power Generation Efficiency of Thermoelectric Generators (TEGs) by Harvesting Waste Heat from a Combustion Engine for Energy Storage	44
A review on process design and bilayer electrolyte materials of bipolar membrane fuel cell	43
Optimizing Electrical Efficiency and Levelized Cost of Energy in Photovoltaic Systems Through Thermal Management Using Microchannel Heat Sinks	43
N-Doped Graphene Nanofibers with Porous Channel Comprising Fe	43
Patchable Transparent Standalone Piezoelectric P(VDF-TrFE) Film for Radial Artery Pulse Detection	42
Double inorganic hole extraction layer of Cs:NiOx/CuInS2 for efficiency and stability enhancement of perovskite solar cells	42
Constructing a novel supercritical carbon dioxide power cycle with the capacity of process switching for the waste heat recovery	42
Comparative Performance Study of Dissolved Gas Analysis (DGA) Methods for Identification of Faults in Power Transformer	42
	42
Evaluation of energy consumption in apartment buildings with biochar and phase‐change material aggregate‐applied artificial stone finishing materials	41
The Effect of Biodiesel, Ethanol, and Water on the Performance and Emissions of a Dual-Fuel Diesel Engine with Natural Gas: Sustainable Energy Production through a Life Cycle Assessment Approach	41
Design‐based risk assessment on an ammonia‐derived urban hydrogen refueling station	41
An Interwell Connectivity Assessment Model for Polymer Flooding Short‐Term Development Data Based on A‐LSTM and EFAST Methods	40
Technoeconomic Analysis of a Wind Power Generation System and Wind Resource Mapping Using GIS Tools: The Case of Twelve Locations in the Commune of Evodoula, Cameroon	40
Synergistic Impacts of Wheat Straw on Coal Bio‐Methanation: Insights Into Microbial Community Dynamics Toward Nontargeted Metabolomics	40
Using Artificial Neural Networks for Classification of Composition and Biomass Species for Energy Based on Thermogravimetric Data	40
RETRACTION: Novel Synthesis of Layered MoS2/TiO2/CNT Nanocomposite as a Potential Electrode for High Performance Supercapacitor Applications	40
Analytical effective thermal conductivity model for colloidal porous composites and nanocomposites based on novolac/graphene oxide aerogels	40
Numerical Investigation of Heat Transfer and Pressure Drop in Partially Twisted Five‐Lubed Tube With Al2O3 Nanofluid	40
Assessment of Different Turbulence Models on Melt Pool Natural Convection Simulations With Internal Heat Source	40
Nanoparticle‐Assisted Bioethanol Production From Various Lignocellulosic Biomass	39
Coolant's sloshing behavior and components' safety assessment of lead‐bismuth‐cooled reactors under seismic excitation	39
Effect of synthesis environment on the electrochemical properties of ( FeMnCrCoZn ) 3 O 4	39
Optimization Design of a Cost‐Effective Surface‐Mounted Permanent Magnet Generator Using Hybrid Ferrite and Rare‐Earth Halbach Arrays	39
Development of a piezoelectric nanogenerator based on mesoporous silica/zinc oxide hybrid nanocomposite fibres	39
A review on carbon nanomaterials for K‐ion battery anode: Progress and perspectives	39
Heat Transfer Enhancement of Liquid Metal Thermal Convection Affected by the Seebeck Effect and Magnetic Field	39
Tuning the Frölich interactions in bismuth modified lead sulphide quantum dots to minimize the excitonic carrier energy dissipation	39
Sustainable Flue Gas Treatment System Assessment for Iron and Steel Sector: Spherical Fuzzy MCDM-Based Innovative Multistage Approach	38
Carbon‐to‐sulfur ratio in the cell controls the discharge capacity, cycling performance and energy density of a lithium‐sulfur battery	38
Dimensional engineering of anode materials for high performance potassium ion hybrid capacitor—A review	38
Nuclear hydrogen production for industrial decarbonization: Creating the business case for the near term	38
Conceptual design and energy, economic and environmental ( 3E ) analysis of a natural gas‐based integrated system with reduced	38
Impacts of power density on the breeding performance of molten salt reactors	38
Parametric Evaluation of the Flow Boiling Heat Transfer Properties of R22 and R407c inside Horizontal Microfin Tube	38
Capacity and state‐of‐charge (SOC) estimation for lithium‐ion cells based on charging time differences curves	38
High-Fidelity Numerical Investigation on Elucidating Sodium Heat Transfer Characteristics for 37-Pin Wire-Wrapped Fuel Bundle in the PLANDTL Facility	37
Discarded COVID ‐19 masks‐derived‐doped porous carbon for lithium‐sulfur batteries	37
Design of Adaptive Multimode Equalization Circuit Based on Analysis of Inconsistency Parameters of Lithium Battery Packs	37
Thermal‐hydraulic analysis of wire‐wrapped rod bundle in lead‐based fast reactor with non‐uniform heat flux	37
Performance investigation and energy production of a novel horizontal axis wind turbine with winglet	37
Development and assessment of a new agrivoltaic‐biogas energy system for sustainable communities	37
Magnetohydrodynamic stabilizer suppressing gas entrainment for safety improvement in a sodium‐cooled fast reactor	37
Optimization of the ratio of aniline, ammonium persulfate, para ‐toluenesulfonic acid for the synthesis of conducting polyaniline and its use in energy storage devices	37
Developing chaotic Bonobo optimizer for optimal power flow analysis considering stochastic renewable energy resources	36
Experimental Investigations on the Wake‐Induced Vibration of an Electromagnetic Energy‐Harvesting System	36
A review on organic photovoltaic cell	36
Photovoltaic modules degradation assessment using different statistical techniques	36
Electrocatalytic study of cu/Ni MOF and its g‐C3N4 composites for methanol oxidation reaction	36
Boosting optical and electrical characteristics of polyvinyl alcohol/carboxymethyl cellulose nanocomposites by GNPs / MWCNTs fille	36
Thermal degradation studies and hybrid neural network modelling of eutectic phase change material composites	36
Life cycle assessment of electric scooters for mobility services: A green mobility solutions	35
Precursor‐driven facile densification of Gd0.1Ce0.9O2−δ interlayer for high‐performance solid	35
Issue Information	35
Developing eco‐friendly ceramic composite separator with competitive electrochemical properties using water‐based polymer binder for lithium‐ion batteries	35
Effect of Sr Substitution on the Novel La1-xSrxCo0.5Ni0.5O3-δ Perovskite-Type Catalysts for Hydrogen Production in Ethanol Steam Reforming	35
Model Forecasting of Hydrogen Yield and Lower Heating Value in Waste Mahua Wood Gasification with Machine Learning	35
Phase change materials in thermally activated building systems: A comprehensive review	35
Bi 2 S 3 can do it all: Sensitizer, counter electrode, and supercapacitor for symmetr	35
PEDOT modified MIL‐53 (Al) as high throughput cathode catalyst for durable and economical power generation in microbial fuel cell	34
Compressibility factor calculation from gross calorific value and relative density for natural gas energy measurement	34
Solution‐state doping‐assisted molecular ordering and enhanced thermoelectric properties of an amorphous polymer	34
Photoelectrocatalytic conversion of biomethane and biogas to hydrogen over a nanostructured Ti/ TiO 2 semiconduc	34
Issue Information	34
Issue Information	34
Magic CO 2 power	34
A novel dynamic contact angle model of lattice Boltzmann method for water droplet impact on proton exchange membrane fuel cell channel surface	33
The improved performance of dye‐sensitized solar cells using co‐sensitization and polymer gel electrolyte	33

Physical engineering of anti‐solvents in perovskite precipitation for enhanced photosensitive affinity	33
Cover Image	33
Contrastive learning for practical battery synthetic data generation using seasonal and trend representations	33
Numerical Simulation of Entrained Bubbles Flow in the Shell‐Tube Heat Exchanger of MSRs Based on Population Balance Model	32
Optimization of inverted CH 3 NH 3 PbI 3	32
Excellent cyclic stability of symmetric and asymmetric supercapacitors constructed by graphene deposited Cu and Ni electrodes	32
Total solar spectrum energy converter with integrated photovoltaics, thermoelectrics, and thermal energy storage: System modeling and design	32
Hybrid Heat Pipe Shutdown Rod as a Novel Concept of Passive Safety System for Microreactor	32
Hierarchically structured silicon/graphene composites wrapped by interconnected carbon nanotube branches for lithium‐ion battery anodes	32
Innovation in progressive study for prospective energy source through photo‐galvanic‐system: d ‐Xylose + MB	31
Single and Double Microencapsulation of Organic Thermochromic Material	31
Significant role of defect‐induced surface energy in water splitting to generate electricity by nickel ferrite hydroelectric cell	31
Development of CoTe2, CoS2, and CoSe2 Electrode Material for the Asymmetric Supercapacitors	31
Modelling the Energy Consumption of Road Vehicles in Transport Networks Evaluation	31
Cu3P Nanoarrays Derived from 7,7,8,8‐Tetracyanoquinodimethane for High‐Rate Electrocatalytic Oxygen Reactions of Lithium‐Oxygen Batteries	31
Cross‐Border Cooperation to Mitigate Wake Losses in Offshore Wind Energy: A 2050 Case Study for the North Sea	31
Metal‐organic framework coordinated with cobalt ion as charge recombination retarder in dye‐sensitized solar cells	31
Fabrication of 2D/2D InVO4/BiVO4 Heterojunction with Synergistic Effects for Enhanced Photocatalytic Degradation and Photoelectrochemical Applications	31
Combined Crank‐Slider and Rack‐Gear Structures for Energy Harvesting and Impact Reduction of the Car Door	31
	31
Issue Information	30
Comparison Study of Four Typical ORC Configurations for Different Waste Heat Characteristics of Engine	30
New energy dominant technology diffusion mechanism based on cellular automation model—The case of the current market and policy environment	30
A Comprehensive Technoeconomic and Environmental Evaluation of a Hybrid Renewable Energy System for a Smart Farm in South Korea	30
Numerical Study of Thermal Performance Influence on Design Parameter and Fe3O4 Nanofluid of Flat Plate Direct Absorption Solar Collector	30
Issue Information	30
One-Pot Synthesis of Biodiesel from Acid Oil Using a Switchable Solvent, 1,8-Diazabicyclo[5.4.0]undec-7-ene (DBU), as a Bifunctional Catalyst	30
Electrooxidation of methanol on Ag, AgNi, and AgCo catalysts prepared by combustion synthesis technique	30
Green Energy: Power Generation Improvement in Microbial Fuel Cells Using Bio‐Synthesized Polyaniline‐Coated Co3O4 Nanocomposite	29
Artificial Intelligence Driven Internet of Things Framework for Wind Energy Monitoring and Performance Enhancement in Smart Cities	29
Thermodynamic modeling of a spectrum split perovskite/silicon solar cell hybridized with thermoelectric devices	29
Long cycle life hybrid lithium‐air batteries based on a weakly acidic lithium iodide catholyte	29
Lightweight freestanding hollow carbon fiber interlayer for high‐performance lithium‐sulfur batteries	29
Investigation on performance of battery thermal management system using spray cooling	28
Application of the Single-Stage Process of Dark Fermentation and Microbial Electrolysis to Improve Hydrogen Productivity from Water Hyacinth	28
Multiobjective operational optimization of energy hubs: Developing a novel dynamic energy storage hub concept using ammonia as storage	28
The efficiency of M (M = Li, Na, or Cs) doped CdS nanomaterials in optoelectronic applications	28
Low‐dose Ir‐doped TiO 2 supported Pt‐Co bimetallic nanoparticles: A highly active and CO‐tolerant electrocatalyst towards methanol oxidation reaction	28
The preparation of 0D / 2D P‐doped Mn x Cd	28
Finite volume method network for the acceleration of unsteady computational fluid dynamics: Non‐reacting and reacting flows	28
1T metallic vanadium disulfide hybridized with MXene and functionalized‐MWCNT as a remarkable electrode for	28
Growth restriction of Co 3 O 4 nanoparticles by	28
Influence of geometrical manufacturing tolerances on lithium‐ion battery performance	28
Diffusion control and surface control mechanism in hierarchical nanostructured porous zinc‐based MOF material for supercapattery	27
The Two-Pad: A Novel Gas Foil Bearing for Fuel Cell Vehicles	27
Numerical Simulation of Ammonia Combustion at Different Hydrogen Peroxide Concentrations	27
Investigations of2D Ti3C2(MXene)‐CoCr2O4nanocomposite as an efficient electrode material for electrochemical supercapacitor	27
Hydrogen production by thermochemical water splitting cycle using low‐grade solar heat and phase change material energy storage system	27
Enhanced Energy Sharing and Management Between Cross‐Harbour Zero‐Emission Buildings Based on a Combination of Electric Ferries and Deck‐on Electric Vehicles With Grid Integrations	27
An overview of supercapacitors electrode materials based on metal organic frameworks and future perspectives	27
Structural, optical, thermal, and dielectric properties of carboxymethyl cellulose/sodium alginate blend/lithium titanium oxide nanoparticles: Biocomposites for lithium‐ion batteries applications	27
Comparative evaluation of AI ‐based intelligent GEP and ANFIS models in prediction of thermophy	27
Stability enhancement for all‐iron aqueous redox flow battery using iron‐3‐[bis(2‐hydroxyethyl)amino]‐2‐hydroxypropanesulfonic acid complex and ferrocyanide as redox couple	27
Metal‐Organic Frameworks Coated Cellulose Nanofibers for Localized Carbon Dioxide Capture	27
Opposing Mixed Convection Heat Transfer for Turbulent Single‐Phase Flows	27
Recent review on electron transport layers in perovskite solar cells	27
Effect of binders on the microstructural and electrochemical performance of high‐sulphur‐loading electrodes in lithium‐sulphur batteries	27
Toward Commercialization of Mechanical Energy Harvester: Reusable Triboelectric Nanogenerator Based on Closed-Loop Mass Production of Recyclable Thermoplastic Fluoropolymer with Microstructures	27
Robust parameter estimation approach of Lithium‐ion batteries employing bald eagle search algorithm	27
Optimum Design of High-Temperature Steam Generator for Hydrogen Production Enhancement	27
Sustainable and open sorption system for low‐temperature heat storage applications	27
The Future of Geothermal Wellbore Integrity: Geopolymer Cements for Enhanced Stability and Hydrogen Coproduction	26
Hybrid Deep Learning Models for Power Output Forecasting of Grid‐Connected Solar PV Systems: A Monocrystalline and Polycrystalline PV Panel Analysis	26
A novel heat dissipation structure based on flat heat pipe for battery thermal management system	26
Modifying the Surface of Twisted Tapes With a Hydrophobic Coating to Enhance Their Performance in Parabolic Trough Solar Collector	26
Management of operation and maintenance practices in photovoltaic plants: Key performance indicators	26
Performance improvement of co‐culture inoculated microbial fuel cell using fuzzy modelling and Harris hawks optimization	26
Analytical investigation of hydrogen distribution with steam condensation in confined vessel	26
Fabrication of asymmetric supercapacitors using molybdenum dichalcogenide nanoarray structures	26
	25
A Study on the Coupling and Coordination Relationship of Science and Technology Innovation, Higher Education, and Clean Energy Based on the Entropy Weight and Gray Correlation Analysis Method	25
The succession of microorganisms and organics in the process of methane generation by co‐degradation of anthracite and rice straw	25
Tariff‐based regulatory sandboxes forEVsmart charging: Impacts on the tariff and the power system in a national framework	25
Facile synthesis of platelet‐like zirconium tungstate nanostructures for high‐performance supercapacitors	25
Molecular Study of Nonequilibrium Transport Mechanism for Proton and Water in Porous Proton Exchange Membranes	25
Synthesis and electrochemical properties of nickel sulfide/carbon composite as anode material for lithium‐ion and sodium‐ion batteries	25
Cover Image	25
Enhancement of photovoltaic power farms using a new power prediction approach	25
Performance and Loss Analysis of a Small-Scale Supercritical CO2 Turbine	25
High‐performance supercapacitor electrolytes based on high‐mole‐ratio phosphoric acid/lauryl ether surfactant liquid crystalline gel	25
The development of novel cost‐effective bio‐electrolyte with glycerol host for carbon‐based flexible supercapacitor applications	25
Study on HHV prediction of municipal solid wastes: A machine learning approach	25
Observer‐based event‐triggered adaptive output feedback control of oxygen excess ratio for uncertain polymer electrolyte membrane fuel cell system	25
Optical light management by self‐arrangement of inverted tetragonal pyramids on the silicon surface through copper‐assisted etching technique in a single step	25
An optimization framework for capacity allocation and energy management of fast electric vehicle charging stations‐wind photovoltaic energy using artificial transgen	25
Amorphous TiO 2 nanotube arrays with Au nanocrystals for lithium‐ion battery	25
Deliberate introduction of mesopores into microporous activated carbon toward efficient Se cathode of Na−Se batteries	25
Electrodeposition of Hierarchical Nanosheet of NiCo2O4/CC as Highly Active and Stable Electrode for Water Oxidation	25
A Study on an Unpressurized Medium-Temperature-Differential Stirling Engine Integrated with a New Spiral-Patterned Flat-Flame Burner and a New Spiral-Finned Hot-End Plate	25
Influence of Ba micro‐alloying on electrochemical and discharge behaviors of Mg‐Al anodes for mg‐air primary battery	25
Introducing a Sustainable Novel Double Absorber Perovskite Solar Cell Using CsSnI3 and La2NiMnO6: A Strategy to Achieve 32.73% Efficiency	25
The use of urea as an N‐doping 3D hierarchical preserving agent for titanium dioxide nanostructures tailored for dye‐sensitized solar cells	25
Establishment and application of a two‐stage reaction equilibrium model for underground coal gasification	25
Experimental validation of off‐board EV charging station with reduced active switch count	25
Multi‐objective optimization design for pressure uniformity in a proton exchange membrane fuel cell stack	25