Periodica Polytechnica-Chemical Engineering

Papers
(The median citation count of Periodica Polytechnica-Chemical Engineering is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Transformative Nanosized Organic Coatings with Euphorbia Condylocarpa/Poplar Tree Bark/Zircon Silicate Hybrid System for Enhanced Industrial Resilience47
Heterogeneous Catalytic Method for the One-pot Three-component Synthesis of Isoquinolonic Acid Derivatives Catalyzed by a 4Å Molecular Sieves Supported Lanthanum Catalyst19
Modeling the Biosurfactant Fermentation by Geobacillus stearothermophilus DSM231318
Efficiency Increase of Biological Methanation based Power-to-Methane Technology Using Waste Heat Recovery with Organic Rankine Cycle15
Smelting a Zn – Pb Sulfide Ore with Magnetite and Carbon for the Production of a Silicon Alloy and Extraction of Zinc and Lead into Sublimates14
Pervaporation Membrane Development via PSf/PMMA/PDMS Polymeric Blends and ZSM-5/TiO2 Integration for Bioethanol Purification as Sustainable Green Energy14
Optimization of Cobalt Nanoparticles for Biogas Enhancement from Green Algae Using Response Surface Methodology13
Peculiar Features of Formation of the Phase Composition of Black Clinker Ceramics12
Production of Rosuvastatin Calcium Nanoparticles Using Gas Antisolvent Technique12
Carbon Capture and Utilization Technology Development Opportunities Based on Biomethanation11
Study on Kinetics and Reaction Parameters of Biodiesel Production from Sunflower Oil and Methanol Using Zinc Oxide Supported Calcium Oxide11
Optimization of Ultrasound-enhanced Subcritical Water Hydrolysis of Oil Palm Empty Fruit Bunch for the Production of Fermentable Sugar10
Crystalline Forms of 4,4'-Methylenediantipyrine: Crystallographic Unit Cell for the Anhydrous Form, from Laboratory Powder XRD Pattern by DASH Program Package9
Preparation of Highly Porous Scaffolds with Controllable Pore Size from Microbial Polyesters9
Waste Algae for Bioenergy Generation to Mitigate Eutrophication and Greenhouse Emissions in Water Bodies7
Use of Nanostructured Photocatalysts for Dye Degradation: A Review7
Usage of the New Modifier-curing Agent in Plywood Technology: The Influence to Urea-formaldehyde Resin Curing and Formaldehyde Emission7
Mathematical-model Analysis of the Potential Exposure to Lead, Zinc and Iron Emissions from Consumption of Premium Motor Spirit in Nigeria7
Investigation of the Role of Arabinoxylan on Dough Mixing Properties in Native and Model Wheat Dough Systems7
Synthesis and Studies of 9-Activated 4,5-Dimethoxyacridine Multifunctionalizable Building Blocks7
The Effective Carbon Number of Chlorobenzenes7
Phytochemical Diversity and Related Bioactivity of Ethyl Acetate Fraction from Different Organs and Provenances of the Edible Halophyte Crithmum Maritimum L.6
Study and Optimization of a New Perovskite Solar Cell Structure Based on the Two Absorber Materials Cs2TiBr6 and MASnBr3 Using SCAPS 1D6
Synthesis Processes of Carbonaceous Material/Conducting Polymer Nanocomposites in Relation to Grafting and Electrochemical Properties for Supercapacitor Application: A Review6
Preparation and Characterization of SnO2 / AC as a Novel High Surface Area Nanocatalyst6
Evolved Gases and Unified Kinetic Model for Low-temperature Thermal Decomposition of Rice Straw Hydrolysis Residue for Possible Value Addition6
Biodegradation of Plastic Wastes in Soil: A Review on Testing and Evaluation Procedures6
Comprehensive Processing of Vanadium-Containing Black Shale Tailings5
Diisopropyl Malonate as Acylating Agent in Kinetic Resolution of Chiral Amines with Lipase B from Candida antarctica5
High Surface Area Silica Particles Using Anionic Surfactant Template Prepared by One-step Spray Drying System for Dye Removal Application5
Pressurized Liquid Extraction for the Recovery of Carotenoids and Functional Compounds from Green and Orange Dunaliella salina Biomasses5
Characterization and the Effect of Different Parameters on Photocatalytic Activity of Montmorillonite/TiO2 Nanocomposite under UVC Irradiation5
Testing the Fit of Regression Models Estimated with Extremely Small Samples: Application in Pharmaceutical Stability Studies5
Phytochemical Profiles, in vitro Antioxidants, and Anti-inflammatory Activities of Flowers and Leaves of Lantana camara L. Grown in South of Tunisia5
Performance of Activated Carbon Supported Cobalt Oxides and Iron Oxide Catalysts in Catalytic Cracking of Waste Cooking Oil5
Optoelectronic and Dielectric Properties of Tenorite CuO Thin Films Sprayed at Various Molar Concentrations5
Modified Koufopanos' Mechanism in the Kinetics of in-situ Catalytic Pyrolysis of Co-pelletized Rice Husks and Ash4
Effect of Autoclave Pretreatment on Biogas Production through Anaerobic Digestion of Green Algae4
Utilization of Industrial Rosa damascena Mill. By-products and Cocoa Pod Husks as Natural Preservatives in Muffins4
Parametric Optimization of a Reactive Distillation Column for the Ethyl Tert-Butyl Ether Production4
Flame Protection Technologies for Wood: Developing and Testing for Fire of Timbers with a Flame-retardant Coating Based on the Epoxy-amine Composite Modified by Copper(II) Hexafluorosilicate4
Total Dissolved Solids, Phenol, and Barium Removals from Oilfield Produced Water Using Kapok Fibers and Ultrafiltration Membrane4
Synthesis and In Vitro Anticancer Evaluation of Chrysin Containing Hybrids and Other Chrysin Derivatives4
Applicability of Neural Networks for the Fermentation of Propionic Acid by Propionibacterium acidipropionici4
The Effects of Different Solvents on Phenolic, Flavonoid, Anthocyanin Contents and Free Radical Scavenging Activity on Pomegranate Juice and Seeds4
Effect of Fe Addition on Anaerobic Digestion Process in Treating Vinasse: Experimental and Kinetic Studies4
Saccharification and Fermentation of Cellulolytic Agricultural Biomass to Bioethanol using Locally Isolated Aspergillus niger S48 and Kluyveromyces sp. Y2, respectively4
Preface4
Metal-Coordinated Epoxy-Amine Composition with Reduced Fire Risk: Elaboration, Thermal and Ignition Resistance4
Influence of Carbon Black/Silica Hybrid Ratio on Properties of Passenger Car Tire Sidewall3
The Application of Mathematical Modeling Tools in Optimizing the Purification Process of the Substance Oligohexamethyleneguanidine Hydrocitrate3
Nanoformulation of Therapeutic Enzymes: A Short Review3
In–Vitro Antibacterial and Antifungal Efficacy of Greenly Fabricated Senna alata Leaf Extract Silver Nanoparticles and Silver Nanoparticle-Cream Blend3
Stereoselective Synthesis of Novel (±)-trans-Dihydronarciclasine Analogues: Preparation of a Pivotal Intermediate Containing Two Methoxy Substituents3
CFD Investigation of Dry Tray Pressure Drop of Perforated Trays without Downcomer3
Applying Heterogeneous Catalytic Reactions for Organic Chemical Syntheses3
Dynamic Light Scattering in Gels and Solutions3
Improving the Performance of Polysulfone-nano ZnO Membranes for Water Treatment in Oil Refinery with Modified UV Irradiation and Polyvinyl Alcohol3
Screening and Ranking Methodology Applied to Biochars Aimed at Acidic and Calcareous Sandy Soil Improvement3
Optimization of the Hot-Pressing Regime in the Production of Eco-Friendly Fibreboards Bonded with Hydrolysis Lignin3
A Green Synthetic Strategy for Pyrazolo[1,5-a]pyrimidin-7(4H)-one Derivatives by the Reaction of Aminopyrazoles and Symmetric/Non-symmetric Alkynes Assisted by KHSO4 in Aqueous Media3
Modeling of a PEM Electrolyzer Operating at Part Load Conditions for Dynamic Simulation in DWSIM2
Comparison of α-Fe2O3 Nanocatalyst Synthesized with Various Surfactants and its Application in Phenol Degradation2
Effect of Mixed Oxide-Based TiO2 on the Physicochemical Properties of Chitosan Films2
Assessment of the Energy Efficiency of Ammonia Production by Microbubbles2
The Application of Membrane Technology in the Concentration and Purification of Plant Extracts: A Review2
Foreword2
Elucidation on Performance and Structural Properties of Skinned Asymmetric Nanofiltration Membrane Based on Theoretical Models2
Screening of Local Wild Xanthomonas Species for Xanthan Production on Crude Glycerol-based Medium2
Efficient Catalytic Hydrocracking of Crude Palm Oil Over EDTA Template-assisted SiO2-Al2O3/NiMo Catalysts2
Characterization of Yeast Strains with Ketoreductase Activity for Bioreduction of Ketones2
Evaluation of the Open Source Process Simulator DWSIM for Bioprocess Simulation2
Formaldehyde Adsorption and Sensing: A Density Functional Theory Study on Pd4 Nanocluster Decorated CNT Structure2
Microstructure and Corrosion Study on Friction Surfaced Aluminum Alloy Coatings over Mild Steel2
Evaluation of the Plant Growth Promoting Effect of Root Contact, Diffusible and Volatile Compounds Produced by Rhizobacteria and Microalgae on Arabidopsis Thaliana2
Recent List of Cyclodextrin-Containing Drug Products2
Tolerance Limit-based Estimation of the Proportion of Non-conforming Parts in a Multiple Stream Process2
Characterization of Vanadium and Sulfur Containing Compounds of Kazakhstan Petroleum Vacuum Residuum2
Upgrading of Waste Tyre Pyrolysis Oil for Obtaining Valuable Products2
The Effect of Different Ratios of Malonic Acid to Plyvinylalcohol on Electrochemical and Mechanical Properties of Polyacrylonitrile Electrospun Separators in Lithium-Ion Batteries2
Effect of Hot Air Drying Temperature on Drying Kinetics, Physico-Chemical Properties, and Energy Consumption of Culture Asparagus (Asparagus officinalis L.)1
Investigation of the Crack Propagation in the Graphene/Synthetic Rubber Nanocomposite Materials with DIC Technique1
High-temperature Thin-layer Drying Kinetic of Cultivated and Wild Algerian Olive Leaves1
Processing and Characterization of Polypropylene Nanocomposite Films Reinforced with Hexagonal Boron Nitride Nanosheets1
Conversion of Edamame Pods (Glycine max) and Cassava Peel into Biobriquettes Using a Mixture Fly Ash and Bottom Ash: Thermal Characteristics and Optimization1
Fabrication of Transparent Composites from Pinaceae Wood Packaging Residues1
The Effect of Surfactants and pH Modifying Agents on the Dissolution and Permeation of Pimobendan1
Facile Preparation of Bimetallic MOF-derived Supported Tungstophosphoric Acid Composites for Biodiesel Production1
The Effect of Microwave Irradiation on the Synthesis of Graphene from Battery Waste on Capacitance Properties1
Bioethanol Production from Oil Palm Empty Fruit Bunches Using Saccharomyces cerevisiae Immobilized on Sodium Alginate Beads1
Microplastics in Aquatic Environments: Recent Advances in Separation Techniques1
Effect of Operating Parameters on Agricultural Biomass Mixture Pyrolysis Process in a Batch Reactor1
Synthesis of Chitosan-ortho-vanillin/AgNPs Schiff Base Composite as Food Preservative1
Acute Ecotoxicological Effects of Bauxite Residue Addition on Mortality and Motion-frequency of Dendrobaena veneta and Enchytraeus albidus (Annelida) in Three Types of Soils1
Teszt_10.26_Accept1
Dandelion (Taraxacum officinale) Root Extract as a Green Corrosion Inhibitor of Steel in 3% NaCl1
Increasing Flame Ionization Detector Response by Silylation: The Effective Carbon Number of Carboxylic Acids1
Numerical Investigation of Enhanced Efficiency in CIGS Solar Cells with 3C-SiC and PEDOT:PSS Integration1
Development of Multi-Compartment Dielectric Barrier Discharge Plasma Reactor for Innovative Water Treatment1
New Sustainable Pd(II)/Fe(III) Catalytic System Very Efficient in the Hydromethoxycarbonylation of 1-octene1
Kinetic Investigation on Thermal Degradation of Empty Oil Palm Bunches Pyrolysis1
Pervaporation Separation of Tetrahydrofuran/Water Azeotropic Mixtures using Phosphorylated Blend Membranes1
Green Synthesis of 2-isonicotinoyl-4,6-dihydroimidazo[4,5-c] Pyrazol-5 (2H)-one Derivatives via One-pot Multicomponent Approach as a Potent Antifungal Agent1
Simultaneous Removal of Cu2+, Zn2+ and Cd2+ from Aqueous Solutions by Alkali Activated Slag1
Pressurized Liquid Extraction of Hemp Residue and Purification of the Extract with Liquid-Liquid Extraction1
Torrefaction: Process Parameters and Reactor Design1
Byproduct Formation of Chlorination and Chlorine Dioxide Oxidation in Drinking Water Treatment1
Effect of N,N'-Dicyclohexyl Terephthalic Dihydrazide on the Crystallization and Properties of Isotactic Polypropylene1
Application of MIA-QSAR in Designing New Protein P38 MAP Kinase Compounds Using a Genetic Algorithm1
Development of Green Extraction Using Natural Deep Eutectic Solvent (NADES) for Separation Polyphenolic Compounds from Spilanthes acmella1
Cellulose, Cellulose Benzoate and Cellulose Citrate from Screw Pine (Pandanus tectorius) Leaves as PVDF Filler for Improved Permeability and Anti-fouling Properties1
Kinetics, Equilibrium and Thermodynamic Studies on Removal of Oleic Acid from Sunflower Oil onto Amberlyst A211
Statistical Optimization of Biodiesel Production from Non-edible Pongamia Pinnata Oil1
Determining the Quintet Lifetimes in Side-ring Substituted [Fe(terpy)2]2+ Complexes1
ILT20 – an Upgraded Computer Program for Evaluation of Accelerated Leach Test Data of LLW in the Hungarian NPP Paks1
High-Performance Polymeric Surfactant of Sodium Lignosulfonate-Polyethylene Glycol 4000 (SLS-PEG) for Enhanced Oil Recovery (EOR) Process1
0.1074640750885