Canadian Journal of Civil Engineering

Article	Citations
Effect of particle size and CO2 treatment of waste cement powder on properties of cement paste	51
Rejuvenation of short-term aged asphalt-binder using waste engine oil	38
Water pipe failure prediction and risk models: state-of-the-art review	36
A review on rejuvenating materials used with reclaimed hot mix asphalt	24
Predicting the seismic collapse capacity of adjacent structures prone to pounding	22
Strength development of cemented tailings materials containing polycarboxylate ether-based superplasticizer: experimental results on the effect of time and temperature	19
Extended review of contractor selection in construction projects	17
Influence of surface footing loading on soil arching above multiple buried structures in transparent sand	16
Seismic fragility assessment of multi-span concrete highway bridges in British Columbia considering soil–structure interaction	15
Strengthening of shear deficient RC deep beams using GFRP sheets and mechanical anchors	14
Study of warm mix asphalt using reclaimed asphalt pavement and copper slag: a review	14
Mechanical performance of engineered cementitious composites incorporating recycled glass powder	13
Managing sewerage networks using both failure modes, effects and criticality analysis (FMECA) and analytic hierarchy process (AHP) methods	13
Discharge estimation in converging and diverging compound open channels by using adaptive neuro-fuzzy inference system	13
Coronavirus disease 2019 (COVID-19): a new challenge in untreated wastewater	12
Numerical assessment of vertical ground motion effects on highway bridges	12
A meta-analysis of critical causes of project delay using Spearman’s rank and relative importance index integrated approach	12
Evaluation of recycled asphalt mixture at low temperature using different analytical solutions	11
Influence of moisture infiltration on flexible pavement cracking and optimum timing for surface seals	11
Real-time winter road surface condition monitoring using an improved residual CNN	11
Characterizing site investigation performance in a two layer soil profile	11
Use of mode shape ratios for pier scour monitoring in two-span integral bridges under changing environmental conditions	11
Identification of critical risks in international engineering procurement construction projects of Chinese contractors from the network perspective	11
Hybrid fuzzy system dynamics model for analyzing the impacts of interrelated risk and opportunity events on project contingency	11
Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement for fine aggregate in engineered cementitious composite (ECC)	10

Leveraging in situ resources for lunar base construction	10
Three-dimensional numerical simulation of local scour around circular side-by-side bridge piers with ice cover	10
Integrated simulation-based dynamic traffic and transit assignment model for large-scale network	10
Review of the fire risk, hazard, and thermomechanical response of bridges in fire	10
A review of methodological approaches for saturation flow estimation at signalized intersections	10
Study on microstructure influence mechanism to mechanical behavior of OGFC asphalt mixture	9
Investigating the effects of inelastic soil–foundation interface response on the seismic demand of soil–structure systems	9
Capacity estimation of unsignalized intersections under heterogeneous traffic conditions	9
Detecting potholes in asphalt pavement under small-sample conditions based on improved faster region-based convolution neural networks	9
Investigating factors affecting injury severity in bicycle–vehicle crashes: a day-of-week analysis with partial proportional odds logit models	9
AI-based cloud computing application for smart earthmoving operations	9
Evolutionary game analysis of government supervision and private sector ecological technology innovation behavior for water environment treatment PPP projects on the basis of public participation	9
Lane-based vehicular speed characteristics analysis for freeway work zones using aerial videos	8
A modified rheological model for the dynamic modulus of asphalt mixtures	8
Simultaneous effects of nanosilica and basalt fiber on mechanical properties and durability of cementitious mortar: an experimental study	8
Analysis of the impacts of risk factors on teenage and older driver injury severity using random-parameter ordered probit	8
Parametric study of multi-story, perforated, partially grouted masonry walls subjected to in-plane cyclic actions	8
Climate change impact and adaptation for highway asphalt pavements: a literature review	8
Properties of slag geopolymer concrete modified with fly ash and silica fume	8
Direct modeling of subway ridership at the station level: a study based on mixed geographically weighted regression	8
Effect of different sediment dewatering techniques on subsequent particle sizes in industrial derived effluent	8
Research on asphalt mixture force chain identification criteria based on computational granular mechanics	8
Analysis of dynamic available passing sight distance near right-turn horizontal curves during overtaking using LiDAR data	8
Structural evaluation of invert-cut circular and arch shape corrugated steel pipes through laboratory testing	8
Numerical performance assessment of buried corrugated metal culvert subject to service load conditions	8
Investigating effective maintenance policies for urban networks of residential cities by using optimum and sensitivity analyses	7
Reliability-based design of truck escape ramps	7
Behavior of asphalt mastics containing different materials as filler	7
Methodology for seismic risk screening of existing buildings in Canada: Structural scoring system	7
An experimental and numerical investigation of pullout behavior of ductile iron water pipes buried in sand	7
Construction and resource short-term planning using a BIM-based ontological decision support system	7
Physical and hydraulic properties of recycled glass as granular materials for pavement structure	7
An elicitation process to quantify Bayesian networks for dam failure analysis	7
An enhanced spatial statistical method for continuous monitoring of winter road surface conditions	7
Application of nanotechnology in pavement engineering: a review	7
Behavior of high-performance RC composite corbels with inclined stirrups	7
Galloping response of sector-shape iced eight bundle conductors	7
Incorporating bicycling demand into pavement management systems for convenient bikeway networks	7
A comparison of project delivery method performance for water infrastructure capital projects	7
Form friction factor of armored riverbeds	7
Analytical study of the seismic performance of all-steel buckling-restrained braces with H-shaped cores	7
Prediction of pressure coefficient on setback building by artificial neural network	6
Mobile crowdsourcing-based data collection for user-centered facility maintenance management	6
Crowd behaviour in Canadian football stadia — Part 2: Modelling	6
Direct generation of floor design spectra (FDS) from uniform hazard spectra (UHS) — Part II: extension and application of the method	6
Predictive model for construction labour productivity using hybrid feature selection and principal component analysis	6
Optimizing snowplow routes using all-new perspectives: road users and winter road maintenance operators	6
Optimal seismic isolation characteristics for bridges in moderate and high seismicity areas	6
Crowd behaviour in Canadian football stadia — Part 1: Data collection	6
Development of ductility-related modification factor for CLT-coupled wall buildings with replaceable shear link coupling beams	6

Accuracy evaluation of statically backcalculated layer properties of asphalt pavements from falling weight deflectometer data	6
Location-based analysis of car-following behavior during braking using naturalistic driving data	6
Experimental study on the flexural behavior of flat steel – concrete composite beam	6
Development of a multi-modal overlay tester for the evaluation of asphalt overlay cracking behaviors	6
Development of performance limit states for concrete bridge piers with high strength concrete and high strength steel reinforcement	6
Clear-water and live-bed scour depth modelling around bridge pier using support vector machine	6
Removal of hexavalent chromium from water using hydrochar obtained with different types of feedstock	6
Direct generation of floor design spectra (FDS) from uniform hazard spectra (UHS) — Part I: formulation of the method	6
Effect of alkali activator dosage on compressive and tensile strength of ground granulated blast furnace slag based geopolymer concrete	5
Improving estimate at completion (EAC) cost of construction projects using adaptive neuro-fuzzy inference system (ANFIS)	5
Developing SonReb models to predict the compressive strength of concrete using different percentage of recycled brick aggregate	5
Dynamic response of reinforced concrete sheds against the impact of rock block with different shapes and angles	5
Effect of nonstructural components on the dynamic characteristics of light-frame wood buildings	5
An explicit expression for velocity profile in presence of secondary current and sediment in an open channel turbulent flow	5
Formwork systems selection criteria for building construction projects: a critical review of the literature	5
Bridge infrastructure resilience assessment against seismic hazard using Bayesian best worst method	5
Asphalt pavement friction coefficient prediction method based on genetic-algorithm-improved neural network (GAI-NN) model	5
4D-based automation of heavy lift planning in industrial construction projects	5
Finite element analysis and design of cold-formed steel built-up closed columns with flange and web intermediate stiffeners	5
Optimizing chute-flip bucket system based on meta-modelling approach	5
Methodology for seismic risk screening of existing buildings in Canada: Non-structural component scoring system	5
Laboratory evaluation of cracking resistance for asphalt mixtures modified with nanoclay and nanocellulose	5
Identification of unbalanced bids based on grey-fuzzy evaluation method	5
Steel buried structures: condition of Ontario structures and review of deterioration mechanisms and rehabilitation approaches	5
The calibration challenge when inferring longitudinal track profile from the inertial response of an in-service train	5
Estimating lateral placement and lane indiscipline of urban mixed traffic of a developing country: an ANN-assisted approach	5
Investigating the transferability of Bayesian hierarchical extreme value model for traffic conflict-based crash estimation	5
Alternative to AHP approach to criteria weight estimation in highway bridge management	5
Drivers’ ability to distinguish consecutive horizontal curves	4
Hydraulics of flow over full-cycle cosine and rectangular sharp-crested weirs	4
Effect of water-to-cement ratio on cracking resistance of concrete at early age in restrained ring specimens	4
Performance-based regulations for safety management systems in the Canadian railway industry: an analytical discussion	4
State of watermain infrastructure: a Canadian case study using historic pipe break datasets	4
Simulation of design changes impact in healthcare construction projects using system dynamics	4
Is speeding more likely during weekend night hours? Evidence from sensor-collected data in Montréal	4
Enhancing unsupervised video-based vehicle tracking and modeling for traffic data collection	4
Rheological, mechanical, and abrasion characteristics of polymer-modified cement mortar and concrete	4
Experimental investigation of RC columns confined with Ni–Ti shape memory alloy wires versus CFRP sheets	4
Effectiveness of static and dynamic backcalculation approaches for asphalt pavement	4
Investigation of texture effects at interlayer bonding behavior between asphalt concrete (AC) overlay on Portland cement concrete (PCC)	4
Hydropower intake-induced fish entrainment risk zone analysis	4
Anchorage capacity of headed bars in steel fiber reinforced concrete	4
Experimental study on sulfate erosion resistance of nano-CaCO3 modified concrete	4
Seismic performance of concrete walls reinforced by high-strength bars: cyclic loading test and numerical simulation	4
Energy dissipation in a deep tailwater stilling basin with partial flaring gate piers	4
Investigation of layered composite plates under acoustic emission using an appropriate finite element model	4
Semi-quantitative seismic risk screening tool for existing buildings in Canada	4
Precision enhancement of smartphone sensor-based pavement roughness estimation by standardizing host vehicle speed	4
Human-centric robotic manipulation in construction: generative adversarial networks based physiological computing mechanism to enable robots to perceive workers’ cognitive load	4
Information entropy evaluation model of bus-line reliability considering the combination of bus stops and bus travel time	4
Comparison of flow and morphological characteristics in uniform and non-uniform sand bed channel	4
Corrosion resistance of fiber-reinforced geopolymer structural concrete in a simulated marine environment	4
Classification of surface pavement cracks as top-down, bottom-up, and cement-treated reflective cracking based on deep learning methods	4
Performance comparison of asphalt emulsion stabilized granular base modified with cement or asphaltenes	4
Design of riprap for bridge pier groups	4
Investigation of interaction among factors underlying construction hazard identification	4
Investment possibility based models for public–private partnerships in water projects	4
Material properties for fracture mechanics based strength assessment of cast iron water mains	4
Effect of activators in different ratios on compressive strength of geopolymer concrete	4
Use of spur dikes with different permeability levels for protecting bridge abutment against local scour under unsteady flow conditions	4
Influence of mix ratio of potato peel and pig manure on reaction kinetics and methane recovery from anaerobic co-digestion	4
Out-of-plane flexural testing and stiffness response of concrete masonry walls with NSM steel reinforcement	3
Weld design for hollow structural section connections: application to Canadian Standards	3
Modeling earthmoving operations in real time using hybrid fuzzy simulation	3
Winter road surface condition classification using convolutional neural network (CNN): visible light and thermal image fusion	3
Seismic fragility assessment of bridge piers incorporating high-strength steel reinforcement and concrete under near-fault ground motions	3
Digitalization Opportunities Road Mapping Tool (DORMT©): A framework to assess digitalization opportunities in construction organizations	3
Enhanced repetitive scheduling formulation for meeting deadlines and resource constraints in linear and scattered projects	3
Dynamic stakeholder salience mapping framework for highway route alignment decisions: China–Pakistan Economic Corridor as a case study	3
Competency and performance measures for organizations in the construction industry	3
CSR maturity model for smart city assessment	3
Application of a multi-objective optimization model for the design of Piano Key Weirs with a fixed dam height	3
Operational based stochastic cluster regression-based modeling for predicting condition rating of highway tunnels	3
Live load factors for military traffic in bridge evaluation	3
Benchmark NBC editions for seismic risk management of existing buildings in Canada	3
Real-time safety inspection and planning: A first application of the Fagan nomogram	3
Mechanical performance of lintel-column joint of Chinese traditional style architecture with viscous damper	3
A dynamic modelling of labor productivity impacts arising from change orders in road projects	3
Review and recommendations for structural testing of buried gravity storm drain pipes and culverts	3
Analysis on hazard perception ability of drivers in plateau areas: by different elevations	3

Development and verification of winter traffic hazard models for the Alberta highway network	3
Bench to full-scale enhanced primary treatment of municipal wastewater under wet weather flow for minimized pollution load: evaluation of chemical addition and process control indicators	3
Mechanical properties of bamboo after exposure to low temperatures	3
Evaluation of freeway travel speed estimation using anonymous cellphones as probes: a field study in China	3
Experimental study on the behavior of thermally insulated RC beams strengthened with CFRP after their exposure to high temperatures compared to non- insulated ones	3
An application framework for development of a maintenance management system based on building information modeling and radio-frequency identification: case study of a stadium building	3
Analysis of the effect of superheavy load vehicles: a review of current criteria	3
Integrating model tree and modified stepwise regression in concrete slump prediction and steel fabrication estimating	3
Development length of glass fibre reinforced polymer (GFRP) rebar based on non-uniform bond stress	3
Modeling arterial signal coordination for bus priority using mobile phone GPS data	3
Characterization of backwater valves in sanitary sewer laterals and associated failures in a Canadian context	3
Fuzzy analytic hierarchy process framework for quantifying the flood resilience of housing infrastructure systems	3
Crack grid detection and calculation based on convolutional neural network	3
Development of ‘speed ratio’ based level of service criteria on undivided urban streets in mixed traffic context	3
Simplified material model for concrete containing high-content of tire-derived coarse aggregate under compression loading	3
Exploring implicit relationships between pavement surface friction and vehicle crash severity using interpretable extreme gradient boosting method	3
A comparative study of floor accelerations of different structural systems with lead-rubber-bearing (LRB) isolators	3
Exploring road safety of pedestrians in proximity to public transit access points (bus stops and metro stations), a case study of Montreal, Canada	3
Icing and aufeis in cold regions I: the origin of overflow	3
An efficient hybrid method for dynamic interaction of train–track–bridge coupled system	3
Concrete-filled hollow structural sections. I: Materials, cross-section classification, and concentrically loaded columns	3
Resistance of a silicone membrane to long-term UV and moisture aging in light of climate change	3
Utilization potentials of a nano bio-carbonate filler to mitigate alkali-aggregate reactivity of glass powder–foamed concrete	3
Exploring the current challenges and emerging approaches in whole building life cycle assessment	3
Optimizing the prefabrication finishing level in modular construction	3
Stability analysis of double V-shaped gully embankment: dimension-reduced calculation method	3
A new method for determination of time-of-day breakpoints based on clustering and image segmentation	3
Hydrologic impacts of climate change in relation to Ontario’s source water protection planning program	3
Knowing what is going on—a smart contract for modular construction	3
Turbulent flow characteristics responsible for current-induced scour around a complex pier	3
Estimated remaining fatigue life of flexible pavements based on the normalized comprehensive area ratio deflection parameter	3
Stability coefficient of interlocking compressed earth block masonry under axial compression	3
Fostering a cast-in-place steel–UHPFRC connector for ductile timber–concrete composite structures: parametric study of the shear behaviour and design considerations	3
Using single and multiple unmanned aerial vehicles for microscopic driver behaviour data collection at freeway interchange ramps	3
Seismic reliability assessment of base-isolated bridges in Quebec	3
A case for adding an inspection level related to structural health monitoring (SHM) for bridge evaluation	3
A gradient based optimization procedure for finding axle weights in probabilistic bridge weigh-in-motion method	3
Injury severity assessment of rear-end crashes via approaches based on generalized estimating equations	2
Fire residual stress–strain curves of corroded thermo-mechanically treated (TMT) reinforcing steel bars	2
Characterisation and pore structure analysis of mortar incorporating valorised rice husk ash	2
Tensile behaviour of ultra-high-performance steel fiber reinforced concrete	2
On the implementation of the dynamically zoned target release reservoir model in the GEM-Hydro streamflow forecasting system	2
Arching followed by catenary response of steel shear connections in disproportionate collapse	2
An analysis of quality liability insurance for prefabricated components using evolutionary game theory	2
Automatic manpower allocation for public construction projects using a rough set enhanced neural network	2
Long-term performance of prestressed concrete continuous box girders in the natural environment	2
Nonlinear modelling parameters and acceptance criteria in ASCE/SEI 41: a critical review and applicability to Canada	2
Life cycle assessment of asphalt pavement maintenance and rehabilitation techniques: a study for the City of St. John’s	2
Investigation of climate change impacts on early-age cracking of jointed plain concrete pavements in Canada	2
Agent-based simulation of workers’ behaviors, productivity, and safety around construction obstacles	2
Finite element-based parametric and forensic analysis of corrosion-induced structural deterioration in prestressed concrete bridge girders	2
Model development for energy dissipation over gabion stepped weirs using GEP and GMDH techniques	2
Analysis of moisture damage susceptibility of semi-rigid base materials based on hydrodynamic pressure erosion test and damage constitutive model	2
Modelling a cost profile for road projects	2
Integrating acceleration signal processing and image segmentation for condition assessment of asphalt roads	2
Modeling commercial vehicle trip generation at the business-establishment level	2
The rheological behavior and high-low temperature performance of warm SBS/rubber asphalt	2
Behaviour of slender concrete shear walls with high-strength reinforcement under reverse cyclic loading	2
Blast behavior of columns built with high-strength concrete and Grade 690 MPa high-strength reinforcement	2
Resilience-based optimization model for maintenance and rehabilitation of pavement networks in a freeze–thaw environment	2
Performance evaluation of road surface temperature forecasts	2
Modelling the transport of tailings after Mount Polley tailings dam failure using multisource geospatial data	2
A fibre-based modelling technique for the seismic analysis of steel–concrete composite shear walls	2
Domain-specific risk assessment using integrated simulation: a case study of an onshore wind project	2
Finite-element block shear failure deformation-to-fracture failure analysis	2
Automated scaffolding safety analysis: strain feature investigation using support vector machines	2
A simplified seismic design method for limited-ductility steel multi-tiered concentrically braced frames in moderate seismic regions	2
Dynamic characteristics of Canada's Parliament Hill towers from ambient vibrations and recorded earthquake data	2
Carbonation performances of steel fiber reinforced geopolymer concrete	2
Assessments of available riverine hydrokinetic energy: a review	2
Influence of headwater reservoirs on climate change impacts and flood frequency in the Kabul River Basin	2
Hybrid treatment system to remove micromolecular SMPs from fruit wastewater treated with an MBR	2
Assessing the assessor: a framework for BIM maturity, capacity, and competency evaluation at the organizational level	2
Optimized maintenance model for wastewater treatment plants	2
Effects of aspect ratio on higher-order moments, conditional statistics, TKE budget and anisotropy in narrow open channel flow	2
Concrete-filled hollow structural sections. II: Flexural members, beam-columns, tension, and shear	2
Organic matter and nutrient removal in a combined anaerobic–aerobic fixed-bed reactor treating digestate from anaerobic biodigester	2
Stability evaluation of overtopped hydraulic structures using computational fluid dynamics	2
Variability in moisture sorption isotherms of plywood and oriented strand board with accelerated ageing	2
Reliability analysis of welded stud shear connectors on simply-supported bridge girders	2
Safety evaluation of centre line, edge line, and dual application rumble strips on Ontario two-lane rural roads	2
2D and 3D numerical modelling of exposed steel base plate connections under cyclic loading	2
Accommodation of freeway merging in a mixed traffic environment including connected autonomous vehicles	2
Nonlinear soil–structure behavior of a deployable and compliant anchor system	2
Numerical assessment of lateral deflection equation of single-storey light-frame wood shear walls	2
Automated framework for extracting sidewalk dimensions from images using deep learning	2
Turbulent characteristics of flow in the vicinity of mid-channel braid bar	2
Empirical correlation of the modified wheel tracker (MWT) and the dynamic creep test for evaluating the permanent deformation of hot mix asphalt (HMA)	2
Numerical investigation of the performance of geocell-reinforced granular base in inverted pavement systems using nonlinear finite element modeling	2
Microscopic reaction process of cement with asphalt emulsion and its influence on macroscopic properties of binder	2
Crack assessment of RC beam–column joints subjected to cyclic lateral loading using acoustic emission (AE): the influence of shear links aspect	2
Optimized route to clear diverging diamond interchange using discrete optimization method	2
Safety effects of maintenance treatments to improve pavement condition on two-lane rural roads — insights for pavement management	2
Utilization of granite powder and glass powder in reactive powder concrete: assessment of strength and long-term durability properties	2
Experimental testing of slender load-bearing masonry walls with realistic support conditions	2