Journal of Electrostatics

Article	Citations
ESD damage control in electronics industry	30
Experimental study on the flow electrification in intact and leak pipelines	17
Characterization of corona discharge treatment on PTFE surface for TENG applications	17
Editorial Board	17
Electrodynamic dust removal technologies for solar panels: A comprehensive review	16
Corrigendum to: “High temperature coronas in air and flue gas from LPG combustion: Current-voltage characteristics, ion mobilities and free electrons.” [J. Electrost. 115 (2022) 103676]	16
Assessment of uniform charge assumption by investigating electrostatic charge distribution and potential during container filling: A numerical study	15
Electrocoalescence threshold enhancement under pulsed electric fields in a specific frequency range	15
Analysis of the charging characteristics of MgO powder in the feeding tube of a mineral insulated cable filling device	15
Influence of moisture content and triboelectric charging conditions on the tribo-electrostatic separation of actual granular mixtures of waste plastics	14
Ag seed layer effects on SnO2 thin films for triboelectric devices	14
Energy-based numerical prediction of electrohydraulic shock wave via a two-stage algorithm	14
Design and analysis of triboelectric energy harvester with an application in self-powered smart mask	14
Study on the influence of electrodes on the collection efficiency during the treatment of welding fume in electrostatic precipitators	13
Numerical study of airborne particle dynamics in vortices near curved electrode surfaces	12
Numerical simulation and experimental study of the negative corona charging process on a wire-to-wire electrode in a steam jet	12
Current pulses and their influences on ozone production in oxygen-fed dielectric barrier discharge	12
Improving lightning protection with corona minimising air terminals	12
Quadrupole moment of conducting toroids with known capacitance	11
Influence of UV ray from corona discharge on discharge characteristics of ZnO surge arrester with a spark gap	11
Experimental validation of the use of thermal stimuli for space charge measurements in dielectric liquids: Application to electrical double layers	11
Carbon black incorporated electrospun nanofibers for air filtration application	11
Experimental investigation on the spray performance of industrial swirl nozzle assisted by ion wind	11
An analytical model-based assessment of Wet Electrostatic Scrubbing for mitigating fine and ultrafine particles emissions in domestic biomass boilers	10
Design formula for a printed disc capacitor	10

Performance analysis of lateral sliding mode triboelectric nanogenerators for self-powered healthcare applications	10
Comparative analysis of bottom-gate bottom-contact OTFTs using bio-synthesized SnO2 and Al2O3 dielectrics through TCAD simulation	10
The electric potential and field of a finite conducting rod, and a conducting disk	10
Recent progress in research on electrostatic precipitation (invited paper)	9
A numerical study on applying ion concentration polarization in micropump design	9
Experimental and numerical modeling of DC corona discharge in Wire-Cylinder-Plane configuration	9
High-voltage electrostatic slides: Are they still relevant for teaching in the era of numerical simulations?	9
Recent advances in electrostatic precipitation of particles from flue gases generated by domestic heating appliances. A brief outlook	9
Dipolar solvent corrections in nanopore electroosmotic flow with different surface electrostatic conditions	9
Theoretical comparison of effects of different cross fields on low pressure DC glow discharge	8
Contributions of plasma simulations to physical understanding of surface dielectric barrier discharge for flow control (invited paper)	8
Number of emitting electrodes effect on a two stage electrohydrodynamic gas pump performance	8
Gap optimization of electrostatic aerial spray nozzles for low-speed aircraft	8
The state-of-the-art of electrohydrodynamic in multi-phase heat transfer systems – A review of application opportunities, fundamental physics and numerical models	8
Numerical analysis of coalescence motion of droplets in oil under CPPM electric field	8
Self-induced electrostatic field and hydrodynamic flow in an electrolyte solution in contact with an ion-pairs releasing active patch on a planar wall	8
Particle in cell simulations of the pulsed plasma sheath: Dependence on pulse parameters	8
Numerical and experimental investigation of electrode configuration effects on EHD heat transfer enhancement of dielectric fluid in a double-pipe annulus	8
Optimization of an electric field calibration chamber for high-precision measurements for imaging applications	8
Numerical modeling of dust particle motion in a corona discharge-based ionic wind cleaning system for solar panels	8
Electrostatic energy of two identical non-coaxial uniformly charged disks lying in parallel planes	8
Non-thermal plasma coupled with photocatalysis for indoor air treatment at high air flow rates: effects on VOCs and bio-aerosols	8
High output flexible triboelectric nanogenerator for biomechanical energy harvesting and wearable body joints monitoring	8
Inductive charging – An invisible Menace	7
Effect of contaminant particles, temperature, and humidity on the dielectric strength of insulating oils	7
Measurement of the effect of parasitic capacitance in minimum ignition energy spark generation circuits	7
Effect of high static electric field on germination and early stage of growth of Avena sativa and Raphanus sativus	7
Triboelectric properties on treated human hair: a mesoscale method to measure the surface potential	7
Advanced image reconstruction for electrostatic tomography in gas-solid two-phase flow based on convolutional autoencoder neural network	7
Influence of electric potential boundary condition on the electrospraying process	7
Editorial Board	7
Investigation of electrical resistivity and electrostatic discharge sensitivity of Mg/ Ba(NO3)2/novolac resin composite	7
Mitigating particle-electrode collision in electrostatic separators: A segmented electrode approach	6
Operando space charge distribution measurements coupled with cyclic voltammetry	6
Aqueous bromide oxidized with pulsed corona discharge	6
On the phenomenon of ionic wind induced by corona discharges	6
Uniform electric-field optimal design method using machine learning	6
Numerical simulation of metal aerosol electrostatic collection based on CFD	6
Modeling of the shape of Taylor cone in EHD printing based on backpropagation neural network and genetic algorithm	6
Connecting standards and theoretical models for minimum ignition energy Estimation: a procedure to optimize the number of experimental tests	6
Effect of particle electrostatic charge level on collection efficiency of an electric metal mesh filter	6
Design and experimental characterization of an electrostatic spring	6
Comparative analysis of two plate-to-plate electrode configurations for dust resistivity measurement	6
Editorial Board	6
Electric field and EHD flow in longitudinal wire-to-plate DC and DBD electrostatic precipitators: A numerical study	5
Application of Critical Energy Density concept for Minimum Ignition Energy determination	5
Triboelectricity of polytetrafluoroethylene particles suspended in silicone oil	5
Soap bubbles deformation in non-uniform electric field and corona discharge	5
A review of streamer discharge-induced plasma chemistry at atmospheric pressure: Key mechanisms and future perspectives	5
Reaction mechanism of plasma chemistry in CO2 hydrogenation: The effect of CO2/H2 ratio	5

Modelling the onset of instability for charged droplets in an external electric field	5
Scaling of energy delivered through an electrostatic discharge to a small series load	5
Triboelectrostatic beneficiation of solid-solid particles: Charge measurement and particle trajectory	5
Investigation of the photovoltaic effect and tribovoltaic effect at the GaAs semiconductor-liquid interface	5
Investigation on the transient solution for electrohydrodynamic deformation of droplets in a combined DC electric field and shear flow field	5
Using DBD plasma actuator to enhance the performance of a reversible axial fan-A numerical approach	5
Asymptotic potential of a rose-shaped disk	5
Editorial Board	5
The influence of barrier discharge by microplasma drug delivery system probe on cell viability and intracellular drug absorption	5
Triboelectrification of dielectric material in the lunar environment	5
Modeling of a novel large-scale electrohydrodynamic vortex flow induced by variation in current density for drag reduction with implication of electrostatic particle clustering	5
Influence of polypropylene content in PPLP for high voltage insulation at cryogenic temperature	5
Cascade properties of EHD wall jets generated by an actuator with distributed surface-embedded electrode pairs	5
Editorial Board	5
Quantitative study on the impact of air humidity on ion flow field and ground Electrical parameters of ±800 kV UHVDC transmission lines	5
Lie group analysis of triboelectric nanoparticle influence on heat and mass transfer in buoyancy-driven nanofluid flow with multiple slip effects	5
Editorial Board	5
Determining the streamer velocity in an atmospheric pressure plasma jet from the target substrate current	4
Editorial Board	4
Experimental study on the effect of the electrode bending angle on the dielectric-barrier discharge performance	4
Numerical study of improving spatial sensitivity uniformity using elliptical electrodes in electrostatic inductive sensor	4
Generation and decay of surface charge in a background charge environment during surface dielectric barrier discharges	4
Scaling relations for the geometry of wire-to-airfoil atmospheric ionic thrusters	4
New electrostatic separator with rotating conveyor for the recovery of WEEE waste	4
Editorial Board	4
Experimental and numerical investigations of DC corona discharge in the triode system	4
Mechanisms of like-charge attraction in three-body systems	4
On the minimum and maximum flowrate of electrospraying: A practical approach, based on fundamentals, for design purposes	4
Assessing the significance of surface electric potential values displayed by a non-contact electrostatic voltmeter in five situations of practical interest	4
Advanced oxidation of airborne m-xylene in combination of pulsed corona discharge and post-plasma photocatalysis	4
Editorial Board	4
Modal analysis of EHD jets through the SVD-based POD technique	4
Performance evaluation of nonthermal plasma carbon dioxide reduction to fuel with dielectric barrier discharge	4
Capacitance and charge density of an open conducting cylinder: Elliptic-kernel integral equation and asymptotics	4
Plasma energy efficiency and equivalent electrical circuit of the multi-tips pulsed corona discharge in dry air at atmospheric pressure	4
Electrostatic surface potential stability of corona charged PTFE electret films by some parametric optimization for radiation protection dosimetry	4
Charge neutralisation: A review—How can corona ionisers achieve zero coulomb and zero volt charge neutralisation?	4
Effect of shape and asymmetry of the voltage pulse on plasma sheath dynamics	3
Evaluating the electric field distribution of an excimer laser chamber via three-dimensional simulations	3
Analysis of the electromagnetic effects on the large floating roof oil tanks by nearby lightning strike based on TLM	3
Power characteristics of a classical Wimshurst machine	3
Ionic wind produced by volume corona discharges and surface dielectric barrier discharges: What role do streamers play?	3
Modeling analysis of the electrostatic interaction between a nth-order electric multipole moment and dielectric layers utilizing the image multipole method	3
Similarities and differences in electrocoalescence processes of conducting uncharged droplets at the DC and pulsed voltage	3
Interior and exterior surface charge densities and quadrupole moment of an open conducting cylinder	3
A review of particle transport and separation by electrostatic traveling wave methods	3
Molecular dynamics promotes study of droplet electrocoalescence: A mini-review	3
Optimization design of electrostatic adhesion films: Based on theoretical modeling and experimental verification	3
Dielectric barrier discharge as bipolar ion source for aerosol charging: Application to filtration, thin film, and aerosol size measurement	3
Design of electrostatic 6D phase space detector for keV ions	3
The mechanism of ionic self-phoresis	3
Editorial Board	3
Mitigating ice adverse effect on distorting the electric field of polymeric insulators using cone-shaped SiC layer	3
Enhancement of flow mixing using a two-stage EHD gas pump with electrodes anchored at one corner of channel	3
A Faraday cup for charge measurements in biophysical and environmental fieldwork	3
Impact of seeding particle properties on PIV accuracy in electrohydrodynamic systems	3
Dielectric barrier discharge actuators: Momentum injection into co-flow and counter-flow freestream	3
Efficacy evaluation of an air-assisted electrostatic disinfection device for the effective disinfection and sanitization against the spread of pathogenic infections	3
Interpolation formula for the capacitance of an open conducting cylinder	3
Modelling the electrostatic potential and capacitances of a human walking	3
The discharge mode differences of positive DC corona between silicon and tungsten needles for electrostatic elimination application	3
Numerical study on water and salt transport of electroosmosis in saline soil	3
Effect of the compensation probe position on the value of the measured potential of a conducting object with constant charge	2
An Electrohydrodynamic analysis for the characterisation of fluid flow within conducting and non-conducting channels	2
Indoor air purification using electrostatic fields without traditional air circulation	2
Effects of relative humidity on contact electrification in granular system	2
Electrostatic discharge charge transfer measurements in electrostatic hazard evaluation	2
Inactivation effect and mechanism of Microcystis aeruginosa by in-liquid pulsed discharge plasma	2
Important aspects in the estimation of precipitation efficiency in electrostatic precipitators with wavy collecting electrodes	2
The isoAdvector method for simulating deformation and breakup of multiple emulsion droplets responding to a DC electric field	2
Experimental investigation of a new solar panels cleaning system using ionic wind produced by corona discharge	2
Electrostatics of two charged cylinders	2
Cylindrical multipole expansion of electrostatic potential in form of triple sum of associated Legendre polynomials	2
Schlieren imagery and velocimetry of electrohydrodynamic heat transfer enhancement in an organic phase change material	2
Effect of voltage waveshape and pressure on streamer breakdown criterion for predicting flashover voltage of polymeric insulators	2
Charging and dynamics of polystyrene latex aerosols under bipolar and unipolar ion field–ELPI measurements and comparison with charging theories	2
Electrode design and analysis for improving laser-induced plasma detection in laser micro-drilling	2
Optimisation of CuO/AC, Fe2O3/AC synergistic multi-electrode DBD reactor for degradation of ATZ in water	2
Extraction efficacy of newly designed electric fields on red beetroot samples	2
Dielectrophoresis crossover frequencies of yeast mitochondria determined by microscopic observation for evaluating their dielectric properties	2

Dielectric discharge of PI material irradiated by 40 MeV-protons	2
Mode transition and uncertainty analysis of repetitive nanosecond pulsed discharge	2
Triboelectric series generated by simultaneous water dewetting of solids	2
Stress due to electric charge density distribution in a dielectric slab	2
Application study on one-dimensional partial element equivalent circuits to lightning current distribution on surface structure	2
The equilibrium of particles electrostatically confined by external forces and the competition between the electrostatic interaction and gravitational field	2
Effects of voltage, frequency, and pulse parameters on mercury oxidation efficiency in pulsed corona discharge	2
Bench-scale tribocharging of polyethylene: Role of gas type, temperature and relative humidity	2
Advanced micromachining of SS304 using electrochemical jet machining: Experimental analysis, depth characterization, and process optimization	2
Ionic wind of a needle-to-plate dielectric barrier discharge	2
Electrostatic charging of material webs in gravure printing presses	2
Modeling of the electric field in buccal epithelial cells to determine the electric field strength at the cytoplasm–Nucleus interface	2
Automated waveform optimization for electroaerodynamic actuators using Genetic Programming Algorithms	2
Magneto-electroosmotic stirring-on-demand: A pathway to enhanced molecular transport in microfluidics applications	2
Wet Electrostatic Scrubbing for gas cleaning applications – a critical review	2
Investigating the human sensory threshold for electrostatic discharge using current waveform measurements	2
Editorial Board	2
Partial discharge behavior in epoxy resin including insulation paper	2
Review of the enhanced effect of external electric field on condensation heat transfer	2
Taylor cone height as a tool to understand properties of electrospun PVDF nanofibers	2
Editorial Board	2
Electrical conductivity as an indicator for early warning detection systems in chemical reactors	2
The effect of the corona wire distribution with W-type of collecting plates on the characteristics of electrostatic precipitators	2
The critical influence of particle charge neutralization on surgical mask and N95 respirator filtration efficiency	2
An investigation of the electroconvection flow and solid extraction during melting of phase-change materials	2
Stored electrostatic energy of a uniformly charged annulus	2
Numerical study of the influence of using crenelated collecting plates on the electrostatic precipitators	2
A review of recent advancements in electrohydrodynamic heat transfer enhancement	2
Development and performance evaluation of a fast-response electrostatic sensor for sub-micrometer particle number concentration	2
Using heat exchanger for construction of electrostatic precipitator in a small heat source	2
Numerical investigation of the effect of operating parameters on droplet ejection in a double ring electrohydrodynamic printing device	1
Triboelectric charging of polydisperse particles in a developed pipe flow	1
Editorial Board	1
Effect of collection efficiency and reducing ozone generation in an electrostatic precipitator with knife edge disk type electrode	1
Electric charge neutralization of granular materials using an air-assisted ionizer under different operational conditions	1
A measurement method for testing textile materials charging for self-charging electrostatic face masks application	1
Measurement of transferred charge in brush discharges from insulating materials	1
Recent advances in the electrostatic separation of particulate matter	1
Optimized electromechanical compensation for electric and magnetic field mitigation near overhead transmission lines using genetic algorithm	1
Characterization and Optimization of Electrospun PVA/PLA Nanofibers Using Taguchi Method: Morphology and Structure	1
Review on electro-convection and electro–thermo-convection in dielectric liquids within different geometrical models	1
Numerical models of two-phase electrohydrodynamics for simulating key processes in electrostatic coalescers: a review (invited paper)	1
Charged conducting cylinders in contact	1
Impact of silver sulfide on rheology and streaming electrification of mineral oil and mixed fluid	1
Electrostatic energy of a solid spherical sector with uniform volume charge density	1
Editorial Board	1
Influence of impulse corona discharge on discharge time lag of a surge arrester with a spark gap	1
Numerical investigation of electric charge measurement by PWP method at solid and liquid interfaces	1
Numerical investigations to determine onset voltages in monolithic electrospray thruster chips with electrospray cavities	1
Experimental study on lightning attraction characteristics of wooden structures	1
Convective heat transfer enhancement by corona discharge in a wire–cylinder electrostatic precipitator with the water-cooling system	1
Oscillation suppression for pulsed arc electrohydraulic discharges based on plasma impedance model	1
Detection of zero-value insulators in ±800 kV DC porcelain strings based on spatial electric field variation	1
Highly stretchable and mulfunctional sensor based on PVDF-TrFE/Fe3O4 composites nanofibres to discriminate texture characteristics	1
Investigation of conduction processes of γ	1
Effect of conductivity on the mechanism of charge ejection in Rayleigh breakup of a charged drop	1
Studies on the reduction of dispersed emissions from a low-power household boiler in a plasma ionic wind zone	1
Investigating the wettability control of fluorocarbon-coated nanofiber membranes by electrowetting process	1
Traveling-wave electrophoresis induced by coplanar microelectrode arrays	1
Growth analysis of the particle layer in a small-scale ESP with biomass combustion	1
Invited Paper: Liquid flow electrification phenomenon: Review	1
Electroaerodynamic thrusters: Influence of a freestream on the current, ionic wind, and force produced by a DC corona discharge	1
Extraction of transferred charge signal of gas-solid two-phase flow based on nonlinear time domain analysis	1
Effect of high voltage and electrode configuration on the trajectories of metallic particles in roll-type electrostatic separators for granular mixtures	1
Ion current density and sheath dynamics in low-pressure RF plasmas: A comparative study of particle-in-cell simulations and analytical calculations	1
Editorial Board	1
Effect of ageing of monoesters and mineral oil on the propagation of creeping discharges	1
Electrostatic separation of Al/Cu/PVC mixture using a cascade of flat horizontal discs	1
Reconsideration of energy measurement of spark discharge using different triggering methods and inductance loads	1
Experimental characterisation of positive creeping discharges propagating along an insulating surface immersed in vegetable and mineral oil	1
A self-powered triboelectric nanogenerator sensor for multiple bolts loosening detecting under impact loading	1
Plasma properties and coupling characteristics of shock waves induced by nanosecond-pulse three-electrode dual-spark SDBD	1
Energy-efficient methane decomposition via ignition coil-generated warm plasma for hydrogen production	1
The discharge characteristics and benzene degradation performance of a three-electrode DBD reactor powered by dual AC power generators	1
Influence of droplet charge on spray painting with a high-speed rotary bell	1
Editorial Board	1
Revisiting the effects of electrostatic forces on the lifting of sand particles in dust storms	1
Atmospheric DBD plasma treatment and its impact on the triboelectric charging of model granular polymers	1
Editorial Board	1
Tribo-electrostatic separation of binary mixtures from polymeric and food materials	1
EHD-induced mass transfer from wet materials	1
Tribo-electrostatic separation of plastic flakes originating from packaging waste	1
Experimental analysis and voltage optimization of water-solid triboelectric nanogenerators for sustainable energy harvesting using a hybrid PSO–random forest model	1
Leader discharge characteristics of equipotential live-line work gaps under positive switching impulse	1
Editorial Board	1
A review of nanosecond pulsed surface dielectric barrier discharge actuators: Effect of electrical parameters and pressures (invited paper)	1
Energy-saving discharge needle shape for electrohydrodynamic airflow generation	1
Potential formation on floating metal plate treated by low-temperature atmospheric pressure plasma jet	1
Study on droplet splitting in single-plate OEW chips	1
A review on advancements in atmospheric plasma-based decontamination and drug delivery (invited paper)	1
Trap energy distribution in aircraft dielectric materials through surface potential decay method	1
A vibratory-type triboelectric charging device design of experiments based modelling for controllable and uncontrollable parameters effect study	1
Degrade VOCs from spray exhaust gas by grounding electrode atomized dielectric barrier discharge coupled with Fenton reagent	1
Experimental study on streamer-leader transition characteristics of sphere-plane gap in valve hall under positive switching impulse voltage	1