Dental Materials Journal

Article	Citations
Effects of multiple firings on the translucency, crystalline phase, and mechanical strength of highly translucent zirconia	57
Fracture strength and bonding interface morphology of CAD/CAM-fabricated ceramic laminate veneers on bleached enamel treated with two different antioxidants	51
Detecting the articular disk in magnetic resonance images of the temporomandibular joint using YOLO series	29
Fabrication of resin cements capable of disintegrating by near-infrared radiation intended for cemented prosthesis removal	25
Effects of repetitive insertion/removal and occlusal load on the retentive force of rest plate–I bar clasps made by selective laser melting	25
Effects of PEEK surface treatment using alumina blasting or concentrated sulfuric acid etching in combination with functional monomers on shear bond strength to adhesive cement after artificial aging	24
Bone augmentation with a prototype coral exoskeleton-derived bone replacement material applied to experimental one-wall infrabony defects created in alveolar bone	23
<i>In vitro</i> investigation of the cell compatibility and antibacterial properties of titanium treated with calcium and ozone	23
Estimation of the tolerance threshold for the irradiance of modern LED curing units when simulating clinically relevant polymerization conditions	21
Exploration of reference genes for the development of a diagnostic kit on vascular aging in human saliva	20
Bioactivity of human dental pulp-derived stem cells with boron-controlled S-PRG filler eluate by anion exchange	18
Changes in enamel hardness, wear resistance, surface texture, and surface crystal structure with glass ionomer cement containing BioUnion fillers	17
Development of novel measurement method for consistency of resin cements	16
Fabrication of bioactive glass coating on pure titanium by sol-dip method: Dental applications	15
Evaluation of the mechanical properties and fit of 3D-printed polyetheretherketone removable partial dentures	15
Development of a new evaluation method for orthodontic forces generated in individual patients	14
A novel hydroxyapatite fiber material for the regeneration of critical-sized rabbit calvaria defects	14
Effects of barium titanate on the dielectric constant, radiopacity, and biological properties of tricalcium silicate-based bioceramics	14
Surface properties and biocompatibility of sandblasted and acid-etched titanium–zirconium binary alloys with various compositions	14
Effect of dimensional variations on the manufacturing process and the 3D shrinkage ratio of stereolithographic dental alumina ceramics	13
Is whitening toothpaste safe for dental health?: RDA-PE method	13
The effect of temporary sealing materials and cleaning protocols on the bond strength of resin cement applied to dentin using the resin-coating technique	13
Finite element analysis of fatigue life of commercially pure titanium clasps additively manufactured with different building orientations	13
Mechanical properties and degree of conversion of resin-based core build-up materials and short fiber-reinforced flowable resin-based composite	12
Does dental material type influence bacterial adhesion under the same polishing conditions? Direct observation using a fluorescent staining technique: An <i>in vitro</i> study	12

Effect of tooth temperature on the dentin bonding durability of a self-curing adhesives: The discrepancy between the laboratory setting and inside the mouth	12
Sealing ability of various endodontic sealers with or without ethylenediaminetetraacetic acid (EDTA) treatment on bovine root canal	12
Effects of remaining dentin thickness, smear layer and aging on the bond strengths of self-etch adhesives to dentin	12
Effects of NaF <i>versus</i> SDF treatment on microhardness of artificial radiation caries at cervical and root areas	11
Influence of remaining coronal tooth morphology with resin abutment and fiber post on static and dynamic fracture resistances	11
Biocompatibility of dental implants coated with hydroxyapatite using pulsed Er:YAG laser deposition	10
Yttrium aluminum garnet-based filler resin composites used as clear aligner attachments	10
Platelet-rich fibrin combined with new bone graft material for mandibular defect repair: A <i>in vivo</i> study on rabbits	10
Influence of monomer type, plasticizer content, and powder/liquid ratio on setting characteristics of acrylic permanent soft denture liners based on poly(ethyl methacrylate/butyl methacrylate) and ace	10
Microbicidal effect and storage stability of neutral HOCl-containing aqueous gels with different thickening/gelling agents	10
Biocompatibility and osteogenic potential of mineral trioxide aggregate mixed with hydrophilic synthetic polymer: An <i>in vitro</i> and <i>in vivo</i> study	10
CAD/CAM lithium disilicate ceramic crowns: Effect of occlusal thickness on fracture resistance and fractographic analysis	10
A statistical model of the rate-dependent fracture behavior of dental polymer-based biomaterials	10
The enhanced shear bond strength of resin cement to zirconia with ordered conical spots through the CO<sub>2</sub> laser process	10
A comparison of osteogenic effect of newly manufactured calcium silicate-based sealers <i>in vitro </i>	9
Influence of etching mode on bonding performance of self-adhesive flowable resin composites to bovine teeth	9
Bioactive small molecules in calcium phosphate scaffold enhanced osteogenic differentiation of human induced pluripotent stem cells	9
Effect of hot-etching treatment duration on the shear bond strength of zirconia-to-resin cement	9
Influence of toothbrush abrasion on the surface characteristics of CAD/CAM composite resin blocks with shade gradations	9
Subgingival titanium wire implantation induces weak inflammatory responses but does not promote substantial T cell activation	9
Coating method for smooth and reinforced surface layer of highly translucent zirconia	9
Marine collagen peptides: A novel biomaterial for the healing of oral mucosal ulcers	9
Effect of filler load on structural coloration and color adjustment potential of resin composites	9
Analyzing the anti-caries effect of fluoride varnish containing tricalcium phosphate using PIXE/PIGE	9
Induction of mesenchymal stem cell (MSC) differentiation from iPS cells using MSC medium	9
Fracture strength of endodontically treated premolars restored with different post systems and metal-ceramic or monolithic zirconia crowns	8
Wear behavior of crown restoration materials and bovine tooth enamel opposed by pure titanium	8
Using digital image correlation to measure displacement and strain during involving distal movement of anterior teeth with clear aligner	8
Effects of repetitive insertion/removal cycles and simulated occlusal loads on retention of denture retainers	8
The inhibitory effects of various ions released from S-PRG fillers on dentin protease activity	8
Effects of multi-components released from S-PRG filler on the activities of human dental pulp-derived stem cells	8
Comparison of discoloration of ceramic containing 3D printable material and CAD/CAM blocks	8
Effects of silver diamine fluoride preparations on biofilm formation of <i>Streptococcus mutans </i>	8
Corrosion behavior of Zr-14Nb-5Ta-1Mo alloy in simulated body fluid	8
Plaque-removal effect of ultrafine bubble water: Oral application in patients undergoing orthodontic treatment	8
Mechanical and optical properties of indirect veneering resin composites after different aging regimes	8
The stain resistant effect of an ultraviolet curable coating material on denture base resin	8
Effect of sodium hypochlorite-based formulations on the adhesion interface after fiber post cementation	8
Incorporation of chlorhexidine in self-adhesive resin cements	8
Shape reproducibility of retentive devices made of cast titanium	8
Influence of resin-coating on bond strength of resin cements to dentin and CAD/CAM resin block in single-visit and multiple-visit treatment	7
Polymerization shrinkage stress of contemporary dental composites: Comparison of two measurement methods	7
The fluoride release, abrasion resistance, and cytotoxicity to hGFs of a novel cyanoacrylate-based fluoride varnish compared with conventional fluoride varnish	7
Effect of decontamination materials on bond strength of saliva-contaminated CAD/CAM resin block and dentin	7
Effect of the S-PRG filler content in the multi-ion releasing paste on the acid resistance of the enamel surface after polishing with the paste	7
Regenerative potential of a novel aloe vera modified tricalcium silicate cement as a pulp capping material: An animal study	7
Influence of sintering conditions on translucency, biaxial flexural strength, microstructure, and low-temperature degradation of highly translucent dental zirconia	7
Does the thickness of universal-shade composites affect the ability to reflect the color of background dentin?	7
Novel antimicrobial denture adhesive containing S-PRG filler	7
Effect of pH of bleaching agent on tooth bleaching action <i>in vitro </i>	7

Analysis of subgingival microbiota and IL-1β, TNF-α and CX3CL1 levels in gingival crevicular fluid of fixed dental prostheses	7
Trueness of stereolithography ZrO<sub>2</sub> crowns with different build directions	7
Fracture resistance of simulated immature maxillary anterior teeth restored with various canal filling materials, with micro-posts or with a fiber post	6
Effect of ultrasound on preheated resin composites used as ceramic luting agents	6
Fluorescence and physical properties of thulium and erbium co-doped dental zirconia	6
Effect of fine particle shot peening on surface friction of stainless steel and ceramic bracket slots	6
Fracture strength of porcelain veneer on surface-treated zirconia	6
Influence of surface roughness of universal shade resin composites on color adjustment potential	6
Bonding ability of resin cements to different types of CAD/CAM composite blocks	6
Can polylactic acid be a CAD/CAM material for provisional crown restorations in terms of fit and fracture strength?	6
The optical property measuring methods for resin composite using multiple spectrophotometers	6
Senescence-associated secretory phenotypes in rat-derived dedifferentiated fat cells with replicative senescence	6
Material behavior of resin composites with and without fibers after extended water storage	6
Efficacy of a novel membrane comprising a copolymer of L-lactic acid and glycolic acid in osteoblasts <i>in vitro </i>	6
Effect of adhesive components in experimental fluoride varnish on fluoride release within 30 days <i>in vitro</i> study	6
Mechanical and thermal stress evaluation of PEEK prefabricated post with different head design in endodontically treated tooth: 3D-finite element analysis	6
Effects of whitening gels on color and surface properties of a microhybrid and nanohybrid composite	6
Preparation of a toothpaste containing theobromine and fluoridated bioactive glass and its effect on surface micro-hardness and roughness of enamel	6
Light-curing units used in dentistry: Effect of their characteristics on temperature development in teeth	6
A novel alumina-ceria polishing paste demonstrated superior polishing of lithium disilicate compared with diamond paste	6
Topographical and crystalline change on surface by sandblasting improve flexural and shear bond strength of niobia-modified yttria-stabilized tetragonal zirconia polycrystal	6
Depth of cure, water absorption, and solubility of indirect composites polymerized by light-emitting diode laboratory units	6
Combination of a silane coupling agent and resin primer reinforces bonding effectiveness to a CAD/CAM indirect resin composite block	6
<i>In vitro</i> study on non-thermal argon plasma in improving the bonding efficacy between dentin and self-etch adhesive systems	6
Impact of surface pre-reacted glass ionomer filler eluate on lipase gene expression in <i>Candida albicans</i>: An <i>in vitro</i> study	5
Characterization of cold atmospheric plasma-modified dentin collagen	5
Measurement of elastic strain recovery in an orthodontic aligner as a driving force for orthodontic treatment	5
Osteogenic response under the periosteum by magnesium implantation in rat tibia	5
Comparison of the accuracy of resin-composite crowns fabricated by three-dimensional printing and milling methods	5
Effect of a chlorhexidine-encapsulated nanotube modified pit-and-fissure sealant on oral biofilm	5
Mechanical characterization of aesthetic orthodontic brackets by the dynamic indentation method	5
Effects of over-the-counter at-home whitening products with LED light on surface roughness of partially- and fully crystalized CAD/CAM lithium disilicate ceramics	5
Effect of water storage and thermocycling on light transmission properties, translucency and refractive index of nanofilled flowable composites	5
Cytotoxicity and genotoxicity of various types of endodontic sealers in Chinese hamster ovary (CHO-K1) cells	5
Effect of crystal orientation on flexural strength of pressable lithium disilicate glass-ceramics	5
Dual function of anti-biofilm and modulating biofilm equilibrium of orthodontic cement containing quaternary ammonium salt	5
Effect of different media on frictional forces between tribological systems made from self-ligating brackets in combination with different stainless steel wire dimensions	5
Visualization of orthodontic forces generated by aligner-type appliances	5
Interblock and intrablock homogeneity of CAD-CAM composites mechanical properties	5
Regional ultimate tensile strength and water sorption/solubility of bulk-fill and conventional resin composites: The effect of long-term water storage	5
Properties and characteristics of foam denture cleaners as denture adhesive removers	5
Effects of cuspal compliance and radiant emittance of LED light on the cuspal deflection of replicated tooth cavity	5
Flexural properties and wear behavior of computer-aided design/computer-aided manufacturing resin blocks	5
Double bond conversion of preheated composite resin beneath lithium disilicate standardized occlusal veneers	5
Effects of surface roughness of ceria-stabilized zirconia/alumina nanocomposite on the morphology and function of human gingival fibroblasts	5
The effects of orthodontic anchor screw inserted into the femur of growth-phase or mature rats —Osteoid formation, bone mineral density, collagen fiber bundles, biological apatite crystal orientation—	5
Color alteration of CAD/CAM 3D-printed, milled resin-ceramic hybrid material compared to enamel	4
Accuracy of 3D printed polymers intended for models and surgical guides printed with two different 3D printers	4
The effect of low-temperature degradation and building directions on the mechanical properties of additive-manufactured zirconia	4
Three-dimensional fit of self-glazed zirconia monolithic crowns fabricated by wet deposition	4
Influence of resin-coating techniques on the marginal adaptation and the bond strengths of CAD/CAM-fabricated hybrid ceramic inlays	4
Effects of polishing procedures on optical parameters and surface roughness of composite resins with different viscosities	4
Influence of one-wall remaining coronal tooth with resin abutment and fiber post on static and dynamic fracture resistance	4
Efficacy of bone grafting materials in preserving the alveolar ridge in a canine model	4
Retentive force of a conical crown with CAD/CAM-fabricated PEEK and zirconia secondary crowns on titanium implant abutments	4
Chemical and physical properties of radiopaque Portland cement formulation with reduced particle size	4
Effects of ceramic microbeads on bonding between a zirconia framework and layered resin composite	4
The effect of space setting values and restorative block materials on the bonding of metal-free CAD/CAM onlay restorations	4
Evaluation of the machinability and machining accuracy of polymer-based CAD/CAM blocks using merlon fracture test model	4
Methacrylic acid/Tween 80 engineered amorphous calcium phosphate as an effective bioactive reinforcing nanofillers in dental adhesive	4
N-acetylcysteine attenuates PGE<sub>2</sub> and ROS production stimulated by 4-META/MMA-based resin in murine osteoblastic cells	4
Fabrication of strontium ions substituted hydroxyapatite from the shells of the golden apple snail (<i>Pomacea canaliculate L</i>) with enhanced osteoconductive and improved biological pro	4
Effectiveness of sodium hypochlorite treatment on the bonding of four adhesive systems to fluorotic enamel	4
Bacterial adhesion and antibacterial property of coating materials containing theobromine and S-PRG filler	4
Influence of the nanostructural characteristics of inorganic fillers on the physical properties of resin cements	4
Fracture resistance of CAD/CAM restorative materials in mismatched removable partial denture rests: An <i>in vitro</i> experimental and finite element analysis	4
Evaluation of bonding performance and multi-ion release of S-PRG fillercontaining self-adhesive resin composite	4
Effect of translucency and absorbance of composite on temperature change during photopolymerization	4
Evaluation of human pulp tissue response following direct pulp capping with a self-etching adhesive system containing MDPB	4
Identification method for dental alloy type using a cosine similarity program: A preliminary investigation	4
Effect of preset torque setting on torque/force generation, shaping ability and surface changes of nickel titanium rotary instrument in different root canal curvature locations: An <i>ex vivo<	4
Changes in the surface texture of pre-polymerized acrylic resin pediatric crowns following acidulated phosphate fluoride application	4
The effects of adding fluorescent carbon nanoparticles on various mechanical properties of denture liners	4
Cellular responses of histatin-derived peptides immobilized titanium surface using a tresyl chloride-activated method	4
Biomimetic concentric microgrooved titanium surfaces influence bone marrow-derived mesenchymal stem cell osteogenic differentiation via H3K4 trimethylation epigenetic regulation	4
Enamel microcrack inspection using near-infrared light transillumination with fluorescence staining	3
Inhibitory effects of <i>Colocasia antiquorum</i> var. <i>esculenta</i> varnish on inflammation and alveolar bone loss in a rat ligature-induced periodontitis model	3
Effect of remaining pericervical dentin on biomechanical behavior of endocrown-restored molars with different materials: Three-dimensional finite element and Weibull analyses	3
Evaluation with finite element analysis of a ball attachment overdenture prosthesis of a patient	3
Effect of vacuum plasma treatment on the shear bond strength of 3D-printed resin and self-adhesive resin cement	3

Bond strength of artificial teeth to thermoplastic denture base resin for injection molding	3
Micro-CT assessment of the effect of silver diammine fluoride on inhibition of root dentin demineralization	3
Utility of biphasic calcium phosphate cement as a seal for root-end filling	3
Bond strengths of three-step etch-and-rinse adhesives to silane contaminated dentin	3
Effect of radiant emittance of an LED curing light on the cuspal deflection of a simulated tooth cavity in bulk-fill composite restoration: A novel simulation method	3
Shear bond strengths of various resin cements between three types of adherends and bovine teeth with and without thermocycling	3
Long-term evaluation of warm-air treatment effect on adaptation of silane-containing universal adhesives to lithium disilicate ceramic	3
Retentive efficacy, antimicrobial and cytotoxicity comparisons between different types of commercial and experimental denture adhesives with antifungal action	3
Universal adhesive application to contaminated/non-contaminated dentin with three different protocols: An <i>in vitro</i> shear bond strength and SEM analysis	3
Evaluation of the mechanical properties and biocompatibility of gypsum-containing calcium silicate cements	3
The effect of sodium metasilicate on the three-dimensional chondrogenesis of mesenchymal stem cells	3
<i>In vitro</i> procedures for color stability evaluation of dental resin-based composites exposed to smoke: A scoping review	3
A novel analysis of the formation and resorption changes in dental hard tissue using longitudinal <i>in vivo</i> micro computed tomography	3
The influence of phosphoric acid and primer treatment on the evaluation of the adhesive resin cement/enamel interface	3
Carboxymethyl chitin or chitosan for osteoinduction effect on the human periodontal ligament stem cells	3
Enhancement of antibacterial property of titanium by two-step micro arc oxidation treatment	3
Evaluation of cytocompatibility and osteoconductivity of Zr-14Nb-5Ta-1Mo alloy with MC3T3-E1 cells	3
Comparison of the shear rebond strength of zirconia brackets treated with different Er:YAG laser energies	3
Bond strength of 4META-MMA-TBB resin to a CAD/CAM composite resin block and analysis of acetone-insoluble cured resin residues at adhesive interfaces	3
Oxide nanoparticles based in magnesium as a potential dental tool to inhibit bacterial activity and promote osteoblast viability	3
Clinical performance of two different adhesive strategies for metal-ceramic cracks repairing and related <i>in vitro</i> study	3
How the repair bonding strength of hybrid ceramic CAD/CAM blocks is influenced by the use of surface treatments and universal adhesives	3
Simultaneous detection of monomers associated with resin-based dental composites using SPME and HPLC	3
Comparison of wear and marginal fitness of 3D-printed deciduous molar crowns: An <i>in vitro</i> study	3
Preparation of CMC/ACP/PHMB nanocomposites and preliminary study on their antibacterial and remineralization functions	3
Carbonate apatite versus β-tricalcium phosphate for rat vertical bone augmentation: A comparison of bioresorbable bone substitutes using polytetrafluoroethylene tubes	3
Biomechanical analysis of axial-radial integrated functional gradient material implants in healthy and osteoporotic bones	3
Rheological properties and handling characteristics of four injectable calcium hydroxide pastes	3
Improvement of the setting properties of mineral trioxide aggregate cements using cellulose nanofibrils	3
Effect of various digital cement space settings on the adaptation of CAD/CAM occlusal veneer “micro-ct evaluation”	3
Pulpal response to mineral trioxide aggregate containing phosphorylated pullulan-based capping material	3
Evaluation of torque moment in self-ligation lingual brackets	3
Short fiber-reinforced resin-based composites (SFRCs); Current status and future perspectives	3
Influence of roughening procedures and priming agents on shear bond strength of CAD/CAM materials to zirconia frameworks	3
Digital image analysis of fluorescence of ceramic veneers with different ceramic materials and resin cements	3
Chemical interaction of 4-META with enamel in resin-enamel bonds	3
Clinical effectiveness of direct resin composite restorations bonded using one-step or two-step self-etch adhesive systems: A three-year multicenter study	3
Preparation and properties of the fine ground strontium-based endodontic cements	3
Monomer conversion, biaxial flexural strength, apatite forming ability of experimental dual-cured and self-adhesive dental composites containing calcium phosphate and nisin	3
Three methods to measure the photopolymerization kinetics for different radiant emittance and composite type	3
The synthetic peptide SVVYGLR promotes myogenic cell motility <i>via</i> the TGFβ1/Smad signaling pathway and facilitates skeletal myogenic differentiation <i>in vitro </i>	2
Surface roughness associated with bacterial adhesion on dental resin-based materials	2
Development and characterization of ultra-high translucent zirconia using new manufacturing technology	2
<i>In vivo</i> bioresorbability and bone formation ability of sintered highly pure calcium carbonate granules	2
Effect of immersion in NaCl solution on the electrical conductivity and the reduction of the shear bond strength of resin-modified glass-ionomer-cements after current application	2
Evaluation of Er:YAG and Er,Cr:YSGG lasers on intraradicular bonding using modified glass fiber tips	2
Use of the fiberglass reinforcement method in thermoplastic mouthguard materials to improve flexural properties for enhancement of functionality	2
The synthesis of Tween80/calcium phosphate nanocomposite bioactive gelatine-based gels as a proof of concept for tooth sensitivity home-treatment	2
Formulations of NaOCl-based in liquid, gel form or with surfactants on dentin deproteinization before fiber post cementation	2
<i>In-vitro</i> evaluation of wear characteristics, microhardness and color stability of dental restorative CAD/CAM materials	2
Anti-demineralization characteristics of surface pre-reacted glass-ionomer (S-PRG) filler-containing varnishes	2
Exploring prosthetic screw rupture in titanium and zirconia superstructures under various conditions	2
Physical properties of experimental light-curing pattern resins based on poly (n-butyl methacrylate) or poly(iso-butyl methacrylate)	2
The long observation <i>in vitro</i> of prevention effect of novel self-etching orthodontic adhesive modified with 2-methacryloxyethyl phosphorylcholine in enamel demineralization	2
Development of a hydroxyapatite nanoparticle-based gel for enamel remineralization —A physicochemical properties and cell viability assay analysis	2
Stress distribution in restorations with glass fiber and polyetheretherketone intraradicular posts: An <i>in silico</i> analysis	2
Gloss and surface roughness of pre-polymerized composite materials designed for posterior CAD/CAM crown restorations corroded with acidulated phosphate fluoride application	2
Electrospun core-shell nanofibers with encapsulated enamel matrix derivative for guided periodontal tissue regeneration	2
Influence of pH and ion components in the liquid phase on the setting reaction of carbonate apatite granules	2
Surface analysis of titanium disks with strontium coating	2
Retention force of fiber-reinforced composite resin post on resin composite for core buildup —Effects of fiber orientation, silane treatment and thermal cycling	2
Effect of N-2-methyl-pyrrolidone on <i>Enterococcus faecalis</i> biofilms	2
Influence of a new polishing system on changes in gloss and surface roughness of resin composites after polishing and brushing	2
Effects of a co-stimulation with S-PRG filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase-1 production by human dental pulp fibroblast-like cells	2
Real-time measurement of transmittance changes during photo-polymerization of conventional and bulk-fill composites	2
Preclinical <i>in vitro</i> study of <i>streptococcus mutans</i> accumulation in three fixed retainer designs: Microbiological assay	2
Antibacterial activities of phytochemicals against <i>Porphyromonas gingivalis</i> with and without experimental fluoride varnish for periodontal disease prevention	2
The effect of different ceramic surface treatments on the repair bond strength of resin composite to lithium disilicate ceramic	2
Residual stresses in glass crowns generated by polymerization and water sorption of resin cements	2
Evaluation of the trueness and adaptation of zirconia crowns fabricated with stereolithography	2
Fabrication and histological evaluation of a self-setting granular cement using calcium sulfate hemihydrate granules with different pore distribution	2
Functional evaluation of mineral trioxide aggregate cement with choline dihydrogen phosphate	2
Can hypochlorous acid be a powerful sanitizer to replace alcohol for disinfection ? —Its bactericidal, degradation of the solutions under various storage condition, and steel rust effects	2
Effect of surface treatment of CAD/CAM resin composites on the shear bond strength of self-adhesive resin cement	2
Comparison of bond strength of universal adhesives using different etching modes: A systematic review and meta-analysis	2
Evaluation of the cytocompatibility of methacrylate resin-based root canal sealers with osteoblast-like cells	2
Erosive effects of commercially available alcoholic beverages on enamel	2
Combination of bone substitutes and vectors in periodontology and implantology: A systematic review	2
Biological and antibacterial properties of composite coatings on titanium surfaces modified by microarc oxidation and sol-gel processing	2
Thermophysical properties and bonding with composite resin of premixed mineral trioxide aggregate for use as base material	2
Establishment of optimal variable elastic modulus distribution in the design of full-crown restorations by finite element analysis	2
Shear bond strength of different bonding agents to orthodontic metal bracket and zirconia	2
Evaluation of the long-term antibiofilm effect of a surface coating with dual functionality of antibacterial and protein-repellent effects	2
Five-year clinical follow-up of bulk-fill restorative materials in class II restorations	2
Effects of methacryloyloxydecyl dihydrogen phosphate on bonding of tri-<i>n</i>-butylborane-initiated resin to human enamel	2
Effect of repair systems on dentin bonding performance	2
Effect of dentin surface conditions and curing mode of resin cement on the dentin bond strength	2
Effects of plasma surface treatment on the bond strength of zirconia with an adhesive resin luting agent	2
Experimental study of the biological properties of nmHA-SiO<sub>2</sub> fiber materials prepared by electrospinning technology	2
Micro-computed tomographic evaluation of the effects of pre-heating and sonic delivery on the internal void formation of bulk-fill composites	2
Interfacial integrity of bulk-fill resin composite restorations in deep Class-II cavities	2
Effect of post-irradiation polymerization on selected mechanical properties of six direct resins	2
Mechanical, antibacterial, biocompatible and microleakage evaluation of glass ionomer cement modified by nanohydroxyapatite/polyhexamethylene biguanide	2
Fitness accuracy and retentive forces of milled titanium clasp	2
Dentin bond strengths of all-in-one adhesives combined with different manufacturers’ flowable resin composites	1