OOIR: Observatory of International Research

Papers

(The median citation count of Journal of Wood Chemistry and Technology is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)

Article	Citations
Insights about the use wood waste from the neotropical Amazonian for the generation of renewable energy	21
Chemical-free saturated steam pretreatment of oil palm empty fruit bunch for improved enzymatic saccharification	20
Green chemistry in wood protection: the role of natural coatings in sustainable development	14
Aqueous ethanol fractionation of softwood and hardwood kraft lignins: Impact on purity and properties	11
Micro-mechanism analysis of the influence of sawdust with different replacement ratio on concrete performances	11
Pilot-scale nanofiltration and techno-economic evaluation of lignin recovery from kraft black liquor	11
Modified phenol formaldehyde resin with sodium silicate as a low-cure wood adhesive	11
N-Hydroxysuccinimide-catalyzed facile synthesis of high-phenolic-hydroxyl-content lignin for enhanced antioxidant properties	11
Efficient electromagnetic interference shielding of three-dimensional hydrophobic Cu/wood/Cu porous composites	10
Correction	10
Cellulose reinforced potato-tapioca starch films-preparation and characterization	9
Synthesis of mesopore-dominated porous carbon with ultra-high surface area via urea-assisted KOH activation	9
Chemical and morphological modification of softwood and hardwood surfaces by an oxygen glow discharge plasma	9
The impact of aging on the properties of heat-treated iroko wood used as a terrace deck for 10 years	9
Structure of oxidized hydrolysis lignin	8
Preparation of thermal-responsive Pickering emulsion by ATRP modified lignin microspheres	8
Statistical optimization of enzymatic saccharification of sodium hydroxide pretreated parthenium hysterophorus biomass using response surface methodology	8
Evaluation of hydrophilicity enhancement and protein adsorption resistance of dual-amine-crosslinked lignin induced by hydration layer formation	7
Isolation of high-purity friedelin and 3-hydroxyfriedel-3-en-2-one from cork smoker wash solids	7
Effect of lysine-functionalized nanocellulose on urea-formaldehyde adhesive performance in particleboard production	6
Carboxylated cellulose nanocrystals for the synthesis of maleic rosin ester and the preparation of superhydrophobic paper	6
Ultrasound pretreatment and enzymatic deinking by using bacterial cellulases from rice husk	6
Caffeine-treated wood as an innovative filler for advanced polymer composites	6
Exploring the sustainable potential of Canavalia ensiformis stem fiber for green product development	6
Effects of original wood extract on color, dimensional stability, and decay resistance of thermally modified wood	5

Characterization of sugar maple and red oak bark: Efficient lignin extraction via the Organosolv and acidic dioxane process	5
A zero-waste one step method to produce carboxy nanocellulose from the untreated barley and wheat straws	5
A novel approach to extract and characterize vacuum-pressurized bamboo fibers using mechano-chemical techniques	5
Effectiveness of three Gabonese tree resin fractions combined with tebuconazole as wood preservative formulations	5
In situ reduction of copper nanoparticles in porous carbonized wood for efficiently enhancing electromagnetic interference shielding performance	5
Preparation of nanocellulose-based flexible calcium carbonate to improve filler retention and combustion performance of cigarette paper	5
Bioethanol from water hyacinth through coupled microwave-alkaline pretreatment method: fermentation optimization	5
Microscopic features and untargeted metabolomics reveal special features of the black-patterning in spalted heartwood of Diospyros spp.	5
Comprehensive identification of chemical constituents in Cortex Mori Radicis based on precursor ion features localization and targeted MS2 analysis	4
Fabrication and mechanical properties of waste wood chips/cements composites for paving materials	4
Wood vinegars: natural sources for preserving tropical and temperate woods against wood-rotting fungi and subterranean termites	4
Valorization of fibrous sludge waste in eco-friendly particleboard production using citric-sucrose based bio-adhesives	4
Development of wood preservatives to prevent biodeterioration	4
Yarns from cellulose microfibrils and nanocrystals embedded in an alginate cylindric matrix	4
Structural changes and enhanced properties of bamboo fibers by controlled pyrolysis	4
Acetylation of cellulose in ethyl acetate: characterization and thin film applications	4
Production of high-quality dissolving pulp from eucalyptus wood chips using deep eutectic solvent and elemental chlorine-free bleaching	4
A lignin-based composite hydrogel for the removal of heavy metal ions from aqueous solution	4
Changes in chemical structures and molar mass parameters of metasequoia and bamboo powders by repeated chlorite treatment	4
Effects of physicochemical characteristics on natural durability of eucalypts woods to wood-decaying fungi	3
A comprehensive review of thermal, chemical, and nanotechnology-based wood treatments with industrial applications	3
Sustainable particleboard from bamboo waste/water hyacinth/plant-based polyurethane adhesive composite: a green flame-retardant material	3
Physical and mechanical characteristics of composite woods fiber-based polyester binders	3
Hierarchical Co-Ni layered double hydroxide decorated on hollow carbon spheres from wood for high-performance supercapacitors	3
Comprehensive characterization of Musa acuminata pseudo fibre, Moringa oleifera bark, and	3
Optimizing NaOH treatment of sisal fibers to improve interfacial adhesion and composite performance with unsaturated polyester matrix	3
Variable-temperature solid-state NMR analysis of woody materials in the presence of small hydroxyl molecules	3
Advances in photocatalytic lignin depolymerization: photocatalytic materials and mechanisms	3
Effect of ligand-modified sulfonated lignin on the thermal stability of disperse dye paste	3
UV irradiation during fluorescence measurements affects the structures and fluorescence properties of isolated lignins in solution	3
Acid-catalyzed Kraft lignin liquefaction for producing polyols and polyurethane foams	3
Influence of inorganic additives on ash adhesion to a metal mesh during bamboo powder combustion	3
Correction	3
Lignocellulosic reinforced composites: a snapshot of progress	3
Preparation and characterization of plywood panels using recycled HDPE as a formaldehyde-free adhesive: A comparative study	3
Comparative surface performance of furfurylated hardwood and softwood: insights into accelerated UV-weathering resistance, chemistry and wettability	3
Development of sustainable plasticwood from LDPE reinforced with upcycling Eichhornia crassipes agro-fibers and natural rosin acids: mechanical, anti-fla	2
Wet scrubbing pre-condensation purification of wood vinegar from pyrolysis coconut shell: Physicochemical parameters, antioxidant capacity and biological properties	2
Multispecies, multisite, multi-age PLS regression models of chemical properties of eucalypts wood using Fourier Transformed near-Infrared (FT-NIR) spectroscopy	2
Investigation of lignin isolated from alkaline-H ₂ O ₂ delignification of bamboo ( Phyllostachys pubescens	2
Variation of Eucalyptus globulus lignin content and composition within and between countries	2
Mechanical and morphological bond line properties of silver birch wood pretreated by aqueous extraction	2
Shaped ionic wood for enhanced phase change performance	2
Research on the preparation of cellulose nanocrystals from balsa wood using microwave-assisted synergistic deep eutectic solvent and H ₂ O ₂	2
Improved reducing sugars production from enzymatic hydrolysis of rubber wood by surfactant-assisted hydrothermal pretreatment	2
Changes in chemical structures and molar mass parameters of birch wood powder by ethylene diamine treatment	2
On the mechanistic and kinetic role of hydrogen sulfide during kraft delignification	2
A comparative study of the mineral elements in different medicinal plant parts of Daphne altaica Pall.	2
Rational design of size-controlled corncob-derived lignin nanoparticles for antioxidant and UV shielding applications	2