Ceramics International

Article	Citations
Preparation of La2Zr2O7 nanopowders via a novel tartaric coprecipitation method	286
Layered rare-earth stabilized Bi2O3: Organic amines intercalation under ambient conditions and their role as a solid adsorbent for iodine	235
Effects of TiO2 nanobelts addition on microstructure and physical properties of vitrified bonds	182
Unleashing the potential of a new Y–BaTiO3/graphene oxide nanocomposites for boosting the dielectric stability at high temperature	169
La2(Zr0.7Ce0.3)2O7:Eu photoluminescence piezo-spectroscopy applied in thermal barrier coatings	165
Pseudocapacitive properties of cobalt molybdate hydrates with biomimetic shark tooth structures induced by cation doping	163
Sudden drop in friction coefficient of extruded Mg matrix composites	157
Enhanced linear and nonlinear optical characteristics of cerium (Ce) doped ZnO film	152
Near-infrared-emitting (Gd1-Nd )3(Ga1-Cr )5O12 glass ceramic phosphors for light-emitting diodes	147
Alteration in structural, spectral, magnetic and dielectric properties of cobalt ferrite NPs through manganese substitution	147
Size-controlled preparations of tungsten and molybdenum borides in calcium or aluminum melt	144
Capture of SiC/amorphous SiO2 core−shell nanowires from rice husk ash within 25 seconds by dynamic magnetic field	143
Crystal structure, chemical bonds and microwave dielectric properties of ultra-low loss Li2Mg2GaTi2O8F ceramics	143
Improved photoelectrocatalytic degradation of methylene blue by Ti3C2Tx/Bi12TiO20 composite anodes	142
Thick (AlTiCrNbTa)O2 high-entropy ceramic coating: Efficient fabrication and characterization	142
The effect of element type and sintering temperature of MFe2O4 sensing electrode on gadolinium doped cerium oxide-based mixed potential triethylamine sensor	138
SHS of copper Chevrel phase compounds	137
Phase transformation and grain growth in spray deposited wurtzite CuInS2 films	131
Effect of post-annealing on structural, tribological, and adhesion properties of TiW/TiWSi/TiWSiN graded composite films	129
Exploring the ambient metastability of yttrium substituted Bi2O3 electrolyte materials	125
Optimization of SiC–ZrC high emissivity composite flexible coating for thermal protection with high interfacial bond strength and temperature resistance	125
Preparation of UN microspheres by external gelation	116
Effect of TiMoTa multi-component diffusion layer prepared by double glow plasma reverse sputtering process on diamond coating growth	115
Improved temperature stability of low-fired Li2Mg3SnO6 microwave dielectric ceramics by using (La0.5Na0.5)TiO3 additives	115
Oxidation behavior and cracking evolution of atmospheric plasma spraying Si and 60Si-40HfO2 bond coats at 1400 °C	111

Bicontinuous nickel/tin oxide films with enhanced photoelectrochemical hydrogen production efficiency	111
Growth, microstructure and magnetic properties of bixbyite structure ScFeO3: A comparative study between bulk and thin film	110
Realization of high-quality Sr4Fe6O13 epitaxial film and its phase competition with SrFeO2.5	109
Fabrication of ceramic fibers with excellent eletromechanical properties	109
Low-threshold green and red random lasing emission in inorganic halide lead perovskite microcrystals with plasmonic and interferential enhancement	108
Synthesis, characterization, and 5-fluorouracil release behavior of superparamagnetic γ-Fe2O3/ZnO hetero-nanostructures for biomedical applications	107
Development, characterization and optimization of a new bone cement based on calcium–strontium aluminates and chitosan-glycerin solution	106
Post-mortem investigation of magnesia-chromium brick corrosion by speiss in a copper smelting furnace	106
Highly efficient latent fingerprint detection from NaYF4:Eu down-shifting microparticles	104
Synthesis of ZnO nanoparticles from the medicinal plant Salvia fruticosa Mill.: Green approach for potential biomedical application against Zn deficiency in humans	103
Heterojunction-enhanced H2S sensing mechanism in on-chip NiFe2O4–CuFe2O4 nanofiber sensors	101
Donor-acceptor co-doped Ba0.675Sr0.325TiO3 filled Poly(vinylidene fluoride) demonstrating significantly enhanced tunability for tunable device applications	100
Investigations on the augmented physical, thermal and optical properties of tellurite glasses containing WO3 and TiO2	99
Damage characteristics and material removal mechanisms of SSiC scratched by diamond grits: comparison with RB-SiC	99
Optimized Structural Design of High-Entropy Rare Earth Disilicate Coatings via Finite Element Method and Plasma Spraying	99
The mechanism of low-temperature formation and corrosion resistance of ceramic coatings on cast Al-Si alloy	98
Fabrications of metal-insulator nanocomposite TiOx thin films and their dielectric properties	98
A high-entropy carbon-coated Na3V1.9(Mg, Cr, Al, Mo, Nb)0.1(PO4)2F3 cathode for superior performance sodium-ion batteries	96
Developing a face-shear lead-free piezoelectric transducer through anti-parallel co-poling and its application to an omnidirectional piezoelectric transducer	96
Phase equilibrium of the CaO–SiO2–Al2O3–Ce2O3 system: A basis for recovering REEs from RE-Containing slag	94
Visible light-driven type II p-Bi3O4Cl/n-BiPO4 heterojunction for effective photocatalytic photodegradation	94
Phenomena and mechanism of local oxidation microlithography of 4H–SiC via electrochemical jet anodisation	94
Concentration dependence of physical properties of low temperature processed ZnO quantum dots thin films on polyethylene terephthalate as potential electron transport material for perovskite solar cel	93
Corrigendum to “In–Zn–Sn–O Ceramic targets: Preparation following the cold sintering process and properties of the materials” [Ceram. Int. 49 (2023) 17797–17805]	93
The effect of substrate thickness on the fluorescence of single-doped Cu+ glass prepared by ion exchange	93
Thermally enhanced near-infrared luminescence in CaSc2O4: Yb3+/Nd3+ nanorods for temperature sensing and photothermal conversion	93
Corrigendum to “Solid particle erosion studies of ceramic oxides reinforced water-based PU nanocomposite coatings for wind turbine blade protection” [Ceram. Int. 48 (2022) 35788–35798]	91
Corrigendum to “Micromorphology tunable Eu2O3 submicron spheres reinforced boron-containing HDPE composites for neutron and gamma-ray complex radiation shielding” [Ceram. Int. 51 (2025) 2360–2372]	90
Corrigendum to “Novel B4C supports for ceramic membrane filtration” [Ceram. Int. 50 (2024) 50436–50443]	90
Corrigendum to “Low-temperature pressureless sintering B4C with Si aids: Is it feasible?” [Ceram. Int. 51 (2025) 18203–18211]	89
Pd/P–CeO2–Al2O3 coatings supported on foam ceramic with controlled morphology for high-performance CO2 methanation	89
The occupation mechanism and service stability of Ca2.5Ce0.5Zr2Fe3O12 type garnet ceramics for the immobilization of tetravalent actinides	88
Functionalization of anatase nanoparticles with Glutaric acid and their photochemical and photocatalytic properties under visible light	88
Tailoring the pigment properties of spinel-type Zn1-xCoxFe2O4 (0 ≤ x ≤ 1) ferrites synthesized by a sustainable gelatin-based route	88
The high temperature dielectric properties and temperature rise behavior of lithium hydride in microwave field	87
Evaluation of the hot corrosion stability of perovskite and spinel oxide-based inert anode materials in CaCl2–NaCl–CaO molten salts	87
Corrosion behavior of Al2O3 modified Yb2Si2O7 ceramics during water–oxygen exposure	87
A novel methodology for evaluating high temperature gas corrosion of oxide-C refractories	87
Influence of dissolved oxygen concentration on the electrochemical and semiconductor characteristics of passive oxide films deposited on Fe-based metallic glass coatings	87
Flexible Bi(Er3+/Yb3+)2MoO6/PAN with sensitive temperature feedback and enhanced visible light photocatalysis	86
Suppressing the phase decomposition of MSZ at 1273 K by doping Al, Ca and Gd oxides	86
Using tetraethyl orthosilicate to tailor the magnetic properties of hexagonal SrFe12O19 ferrites: A comparative study of liquid and solid additives	85
Impact of mixed heavy metal cations (Ba and Bi) on the structure, optical and ionizing radiation shielding parameters of Bi2O3–BaO–Fe2O3–SrO–B2O3 glass matrix	84
Employing defect luminescence of LiGaO2 to realize dynamic readout and multiplexing of optical information	84
Enhanced photoresponse in Type-II MoSe2/WS2 layered heterostructures	84
Sustainable synthesis of iron-based electrode materials using Melodorum fruticosum Lour. leaf extract for supercapacitors	83
Preparation and comprehensive performance of carbon fiber reinforced silica-based ceramic cores	83
Effect of Sm doping on structure and microwave absorption properties of brownmillerite oxide Ca2Fe2O5	83
Biomimetic synthesis of strontium-substituted mesoporous platelet-like hydroxyapatite composites using gelatin type B as a protein template for bone regeneration applications	83
Liquid phase sintering of alumina–silica co-doped cerium dioxide CeO2 ceramics	83

Pulsed laser ablation synthesis of thiol-functionalized W/Fe nanoparticles in liquid for MRI and CT imaging	82
Effects of nitrate-free synthesis on the crystallization and morphology of gel-derived bioactive glass-ceramic with 45S5 composition	82
Curing temperature’s effect on argillite-metakaolin based geopolymer grouts	81
Construction of TiO2 nanointerfaces in Yb2Si2O7 ceramics with adjustable electromagnetic wave absorption and high-temperature stability	81
Enhancing sintering activity and grain boundary conductivity of GDC electrolyte via fiber-like precursor morphology and CaO addition	80
Effect of CCTO nanofillers on structural and electrical properties for bone regeneration applications in PVDF/HAP/CCTO composite films	80
Ultrafast joining of YAG transparent ceramics using glass filler within 50 seconds	80
In-situ structural degradation study of quadruple-cation perovskite solar cells with nanostructured charge transfer layer	80
Occurrence of robust memristive behavior for low-power transient resistive switching and photo-responsive neuromorphic computing in low-dimensional perovskite	79
Preparation of CoS2/WO3 thin films for the construction of electrochromic devices	79
Thermal cycle test of functionally graded and composite environmental barrier coatings in the steam environment	78
Synthesis, physical, structural, mechanical, and nuclear radiation shielding properties in cerium dioxide reinforced lead-silicate glasses	78
Ultra-flexible Al2O3 fibers: A novel catalyst support material for sustainable catalysis	77
Zinc doped calcium phosphate-sulfate hydroxyapatites: Synthesis, characterization, bioactivity, cytotoxicity and antibacterial properties	77
Influence of secondary pre-sintering on sintering shrinkage and piezoelectric properties of PLSBZT multilayer ceramic actuators	77
The positive effect of A-site nonstoichiometry on the electrical properties of Sr2Nb2O7 ceramics for high temperature piezoelectric sensor application	77
Tuning phase structure for enhanced electrostrain in Nb5+-doped Bi0.5(Na0.81K0.19)0.5TiO3 lead-free piezoelectric ceramics	77
Pulse energy-storage performance and temperature stability of Bi2O3-added BaTiO3 based ceramics	76
The structural evolution and electric field-induced strain performance of Bi0.5(Na0.41K0.09)TiO3–Ba(Fe0.5Sb0.5)O3 lead-free piezoelectric ceramics	76
Ultra-fast laser scanning achieves high-strength joining of glass and Al/Al-Alloys	76
Dual-modified catalytic core-shell structure biomass carbon cotton fiber extends broadband electromagnetic waves absorption applications	76
Rapid preparation of traditional and high-entropy garnet ceramics by SPS at low temperature with ultrafast densification	76
Room-temperature multiferroic behaviour in Co/Fe co-substituted layer-structured Aurivillius phase ceramics	76
Effects of hydrothermal treatment of cellulose nanocrystal templated TiO2 films on their photodegradation activity of methylene blue, methyl orange, and rhodamine B	76
Enhanced dielectric permittivity of novel ternary La2Cu–AgO4 nanocomposites with different ratios of 2-D Borophene nanofiller	76
Interfacial engineering and defect passivation of SnO2 through agmatine sulfate in carbon-based perovskite solar cells	75
The microstructural characterization and mechanical response of YSZ ceramic foams fabricated via volume-controlled foaming	75
Phase structure, microstructure, and high-temperature large piezoelectric response of 0.69BiFeO3–0.31BaTiO3–xBi(Zn2/3Nb1/3)O3 with typical R–T phase nanodomain and polar nanoregions morphology	75
Composite materials of amorphous calcium phosphate and bioactive glass nanoparticles for preventive dentistry	75
Synthesis and multifunctional properties of MnxCo1-xFe2O4 nanoparticles via solvothermal route	74
Photoluminescence and electrochemical properties of Samarium-doped SrO-BaO-Al	74
Fabrication and characterization of corundum-mullite composite solar thermal storage ceramics with enhanced thermophysical properties	74
Phase and properties evolution of plasma sprayed rare earth silicate coatings	74
CuO/CeAlO3 nanocomposite with enhanced electrocapacitive performance for supercapacitor applications	73
Improved optical properties of BN powder shielded Ce:YAG ceramics prepared by hot pressing	73
Dielectric breakdown strength of pore-induced alumina substrates	73
Superior dielectric energy storage performance of ultrafine-grained BNT-SBT solid-solution ceramics by solution combustion synthesis	73
The effect of bonding method between WC-Cr3C2–Ni and multiwall carbon nanotubes powders on the properties of composite coatings	72
Microstructure refinement in TiC-ZrC-Ni cermets induced by phase separation of carbide solid solution	72
Development of SiC-SiO2 porous refractories via Direct Ink Writing using controlled micro-coagulation of a silica glass binder suspension	72
Improved photocatalytic oxidation of ciprofloxacin by NiS-coupled WO3 nanorods synthesized by solvothermal method under visible light	72
Failure of new multilayered thermal barrier coatings based on Gd4Al2O9, GdYb-YSZ, and YSZ exposed to sulfate-vanadate molten salt	71
Liquid-phase/defect–barrier co-design for colossal-permittivity LST via ZnBi2O4 grain-boundary engineering	71
Anomalous magnetic behavior of two-phase hexaferrite composite	71
Development of MgAl2O4 spinel powders with addition of 3d transition elements for versatile applications as optical, magnetic, and fluorescent materials	71
Efficient green light-emitting diodes based on alloy quantum dots with an organic/inorganic hybrid surface passivation	71
Preparation and luminescence performance of Dy/Mn co-doped phosphate glass for W-LEDs	71
Constructing a robust mesoporous S-scheme heterojunction AgVO3/ZnWO4 for visible-light-driven oxidation of atrazine	71
Design and Development of highly filled calcium sulfate-poly lactic acid biocomposites as feedstock for low-cost fused filament fabrication	71
Roles of alkali ions in densification process of cold sintered lithium disilicate glass materials	71
Hydrothermal synthesis of high-performance ZnZrO3/rGO composite as an efficient electrocatalyst for oxygen evolution reaction (OER)	71
The effect of GaP quantum dot luminescent addition on the superconducting properties and electron-phonon coupling in MgB2	71
Exploring the influence of La3+ ion substitution and Zn2+ doping on structural, luminescent, and morphological properties of SrY2O4:Dy3+	71
High-performance multifunctional NIR phosphor K2NaAlF6:Mn4+,Cr3+ for pc-LED and X-ray imaging via efficient energy transfer	70
Simultaneous enhancement of operating temperature range and adiabatic temperature change in the electrocaloric effect of (1-x)PST-xPT ceramics	70
Processing of titanium hybrid composites with molybdenum carbide reinforcement	70
Activated alumina recycled from industrial aluminum dross via phase-controlled thermal activation	70
Influence of mixed valence B-site cations on the microstructure and electrical transport properties of La2MgMnO6 ceramics	70
Temperature sensitivity and tunable conduction mechanisms of HfNx thin films	69
Effect of barium strontium titanate modification on the dielectric-breakdown properties of phenyl-vinyl binary composite silicone rubber	69
Green luminescent Sr3Gd(PO4)3: Tb3+ phosphors for lighting applications	69
Combined effects of high-entropy and high-valence ions in oxides for thermistors	69
Nanoengineering of ZnCo2O4@CoMoO4 heterogeneous structures for supercapacitor and water splitting applications	68
Tristate ferroelectric memory in PZT-based films from antiferroelectric-ferroelectric phase transition	68
Construction of interconnected nanostructures via linear chains silica for antireflective coatings in solar cell	68
Waste grape skin bio-derived carbon@NiFe2O4 for the environmental pollutants nitrobenzene detection	68
Influence of cobalt substitution at Ni site: On structural, magnetic, electrical and Mössbauer studies of SrNi2Fe16O27 W-type hexaferrites	68
Nanosized amorphous and nanocrystalline titania doped by Cr as novel, efficient, and cost-effective cool-colored nanopigments	68
Hydrothermal synthesis of Mn2+- and Cu2+-doped calcium hydroxyapatite: morphological features and importance of EPR insights	68
Highly robust and porous cathode current collecting layer for flat-tubular solid oxide fuel cell stack applications	67
Some features of the surface modification of MgO–Al2O3–TiO2–SiO2 glass and glass ceramics by Ag diffusion	67
Impact of calcination temperature on fabrication of mesoporous TiO2 nanocrystals for photocatalytic oxidation of volatile organic compounds under UV light	67
Realizing high energy storage performance in flexible NKBT-ST film capacitor via control of the sodium-to-potassium ratio	67
Effect of modulating monovalent ion doped on A-site high-entropy perovskites	67
Identifying key sintering factors for high ionic conductive garnet Li6.4La3Zr2Ga0.2O12 solid electrolytes	67
Fabrication, characterisation and magneto-responsive performance of manganese ferrite nanospheres for fast separation of oil slicks from water surfaces	67
In situ growth of AuNPs with a nanocavity on the surface of optical fibre for development of SPR sensor	67
Structural, electrical, and magnetic transport properties of La0.72Ca0.28Mn1−Cr O3 (0 ≤ x ≤ 0.06) ceramics	66
Samarium doped yttrium zirconate transparent ceramics for highly transparent reddish-orange light emitting applications	66
A laboratory study to assess the physico-chemical properties of hydraulic calcium silicate-based sealer modified with hydroxyapatite	66

Fabrication of Ti3C2Tx/ZnONPs composite with high antibacterial and antibiofilm activity	65
Controllable growth of high-density tapered N-doped SiC nanowires arrays	65
Nitrosothiol-functionalized silicate bioceramic scaffolds with enhanced antibacterial property for bone repair	65
Production of an eco-friendly, effective antimicrobial and antifungal from cerium/natural bio-hydroxyapatite coating for titanium plates suitable for bone augmentation	65
Fabrication of TiB2-HfN/TiB2-HfC laminated ceramics with a novel inner structure - concentric ripple layers	65
Probing the structure of divalent impurity cations doped ceria nanocubes for photocatalytic activity	65
Combinatory effects of donors and acceptors dopants on the dielectric and piezoelectric behavior of doped PZT-SNYNM ceramics	65
Mechanically tunable thickness-dependent magnetic properties of flexible SrRuO	65
Structure–property correlations in aluminosilicate glasses with progressive MgO-for-Na2O substitutions	64
Synergistic enhancement of strength and plasticity in SnSe via size-effect-triggered multiple slip activation	64
Preparation, microstructure and properties of cordierite-mullite-corundum porous ceramics for high-temperature gas-solid separation	64
Eliminating cracks in 3D-printed ceramics using sacrificial polyethylene wax microspheres in photocurable slurries	64
Enhanced mechanical properties and microstructural evolution of Si3N4-Si3N4 joints using TiZrHfTa interlayer via diffusion bonding	64
Dielectric mechanism and chemical bond characteristics of BaZn1-Cu P2O7 ceramics in MW/THz frequency bands	64
Improvement mechanism of thermoelectric properties of ZnO ceramics by energy band regulation	64
Investigation on the microstructure and high-temperature properties of AlN coating through oxygen addition	63
Nano 2-chloroaniline/SnO2 quantum dots: Phytotoxicity and germination process of Cucumis sativus L seed and different recycling and photodegradation processes of industrial wastewater and Congo red dy	63
Engineering bioactive hydrogel with zinc silicate decorated halloysite nanotubes to promote bone repair	63
High photocatalytic activity of star-like PbWO4 microcrystals: Structural analysis and degradation of anionic and cationic dyes	63
Synergistic strain engineering and dopant-induced lattice distortion yield enhancing piezoelectricity with low coercive field in BiFeO3 thin films on LaNiO3/Si	63
Structural evolution and properties of SiC/SiBCN composites at elevated temperatures	63
Process and microstructure optimization of PyC/SiC composite coatings for SiC fibers: Simulation and experimental verification	63
Preparation and properties of an innovative 3D-printed porous carbon nanotube/fly ash–slag–based geopolymer composite and its crystallization	63
Interfacial chemical mechanism and general encapsulation strategy of surface-modified carbon black in colloidal C@ZrSiO4 core-shell pigments	63
Interfacial modification and corrosion inhibition of ZIF/LDO@EC microcapsules: Insights from experiment and first-principles calculations	62
Structure and chemistry evolution of Si3N4 fibers under harsh temperatures: decomposition and crystallization mechanisms revealed by TEM	62
Enhancing the emission intensity and improving the thermal stability of Mn4+ based on anion substitution through F− regulation	62
Mechanical properties and simulation of thermal gradient formation in GNP-reinforced B4C-TiB2 ceramics by SPS	62
Enhancing SiC/Nb brazed joints by negative thermal expansion (Sr0.2Ba0.8)TiO3 nanoparticle-coated Cu foam	62
Effects of (KMg)3+ co-doping and sintering temperature on the negative thermal expansion property of Sc2W3O12 ceramics	62
Synthesis of Yb:Sc2O3 nano-powders via spray Co-precipitation in an alcohol-water solution for transparent ceramics	62
High brightness and light uniformity Tb3Al5O12: Ce3+, Gd3+ phosphors@silica aerogel composites with unique laser scattering performance for laser-driven lighting	62
Experimental and modeling studies on hydrogen storage using CePO4/CeP3O9/MWCNT nanocomposites	62
Persistent lattice strain mismatch controls high-temperature strength degradation in 3YSZ	62
Influence of Y2O3 sintering aids on performance of c-BN-reinforced AlN/BN composite ceramics	61
Novel warm/cool-tone switchable VO2-based smart window composite films with excellent optical performance	61
Defect design and vacancy engineering of NiCo2Se4 spinel composite for excellent electromagnetic wave absorption	61
Eu2+/Dy3+ co-doped SrAl2O4 phosphor for delayed high-resolution X-ray imaging	61
Enhanced piezoresistivity of polymer-derived SiCN ceramics by regulating divinylbenzene-induced free carbon	61
Characteristics of β-tricalcium phosphate/ZrO2 composite films deposited by pulsed laser deposition at different laser fluences	61
Effect of nickel addition on the physicochemical properties of SrTiO3-based materials	61
Realizing low thermal conductivity in Cr-doped nanostructured higher manganese silicide	61
Flash sintering of high bandgap halides triggered by electrochemical reduction	61
ZnO-doped MnMoO4 ceramics with modulated structure and enhanced microwave dielectric properties for λ/2 microstrip bandpass filters	61
Reversible multiplexing analog and digital optical information storage in Eu3+ doped perovskite-type photochromic materials	61
Enhanced sensitivity towards LPG with selectivity between LPG, NO2, and NH3 by novel CoFe2O4/SiC/BaTiO3 nanocomposites	61
Ceria-based ceramics surface investigation	61
Hydrothermal preparation of TiO2 NTs-SnO2-CeO2 photocatalyst for enhancing photocatalytic removal of antibiotics, dyes and heavy metal ions	61
Fast monitoring of organic dye degradation coupled with a colorimetric approach in a Ag-modified TiO2 nanotube photocatalytic system	61
Adjusting physicochemical and cytological properties of biphasic calcium phosphate by magnesium substitution: An in vitro study	61
Effect of calcium carbonate on the thermal shock behavior of YSZ-based abradable sealing coatings	60
Improving the durability and investing failure behavior of TBCs under thermal cycling-CMAS test by Yb2O3 and Y2O3 co-stabilized ZrO2 materials and different processes	60
Core double-shell CIP@SiO2@ZrO2 composites for broadband and high temperature stable microwave absorption	60
Effect of SiC/SiC composites density on nanosecond-laser machining behaviors	60
Ultraviolet light charged and self-powered mechanoluminescence of KMgF3: Tb3+ glass ceramics in various media	60
Synthesis of highly efficient (Cr, Gd) co-doped CdS quantum dots for photocatalytic H2 evolution beneath artificial solar light irradiation	60
Low temperature phase transition mechanism of amorphous Al-oxalate to nano α-alumina	60
Electronic structure, photocatalytic and electrochemical performance of chalcogenide quantum dots loaded on reduced graphene oxide: (Cu2MnSnS4/rGO)	60
Effects of property mismatch and interface morphology on thermal stress in rare earth silicate environmental barrier coatings	60
Structural, in-situ Raman spectroscopy and XPS studies on ZrW2-Mo O8 ceramics with tunable negative thermal expansion properties	60
Electrodepositing a Mo layer and composite siliconized coating on Nb-based alloy for high temperature protection	60
Hydration characteristics of phosphoaluminate cement for carbon capture, storage and utilization(CCUS) well cementing and the mechanism of pore and compressive strength evolution	60
Ruthenium-doped ZnO nanostructures: Growth, characterization, and applications in waveguides and light-emitting devices	59
Multi-crosslinked network magnesium phosphate bone cement with high flexural properties	59
Compatibility of the mechanical properties and thermal conductivity by the formation of a secondary phase in AlN ceramics: Application of multifractal analysis for the microstructure evaluation	59
Hierarchical Ni-doped ZCOH electrodes with morphology-driven performance in asymmetric supercapacitors	59
Erbium substituted baddeleyites (ErxZr(1-x)O2): Structural, ferroelectric, magnetic and electrochemical analysis for supercapacitors electrodes using walnut shells charcoal	59
Radiation attenuation capacity improvement of various oxides via high density polyethylene composite reinforcement	59
Synthesis of novel ZnO 59
Microwave-hydrothermal synthesis, near ultraviolet/infrared-excited green fluorescence and ratiometric thermometry of Er3+-activated iodate phosphors	58
Synergistic enhancement of microwave dielectric properties in Li0.2Zn0.9TiO3-ZnMg2TiO5 ceramics via a four-phase solid solution approach	58
Multifunctional mullite fiber reinforced SiBCN ceramic aerogel with excellent microwave absorption and thermal insulation performance	58
High-strength low-k glass–ceramic composite covers for 6G communication mobile devices	58
Defect pinning and oxygen vacancy engineering in Ta2O5-doped CaTiO3-SmAlO3 ceramics for enhancing microwave dielectric and mechanical performances	58
Application dependent stability of Ti3C2Tx MXene in PDLC-based smart-windows	58
Thermal shock resistance of thermal barrier coating with different bondcoat types and diffusion pre-coating	58
Densification and mechanical properties of high-entropy diboride ceramics sintered using Ni activation	58
Effect of coarse-Si-powder addition on the thermal and mechanical properties of sintered reaction-bonded silicon nitride	58
Tunable X-ray-induced luminescence in lanthanide-doped LaPO4 nanoparticles	57
Laser processing of calcium manganite-based materials for thermoelectric generators	57
Co1.8Mn1.2O4-La0.9Ca0.1MnO3 composite ceramics with tunable electrical properties for low resistance and high B value NTC thermistors	57
Ability of a MoSi2 coating to resist erosion-corrosion from the impact of atomic oxygen	57
Synthesis, mechanical characterization, and biocompatibility evaluation of Graphene-TiO2 reinforced alumina for biomedical applications	57
High-temperature carbothermal reduction pathway of tantalum pentoxide under vacuum conditions	57
Optimization of SnxCo(3-x)O4 nanoparticles for efficient photodegradation of crystal violet under UV and visible irradiation and antibacterial activity	57
Roll-to-roll processable MXene-rGO-PVA composite films with enhanced mechanical properties and environmental stability for electromagnetic interference shielding	57
Interface engineering and bimodal gradation strategy for high-precision vat photopolymerization 3D printing of boron nitride ceramics	57
Novel well-adhered composite coatings on titanium plates consisted of Sr-doped hydroxyapatite, zein and TiO2 for biomedical applications	57
Novel ferroelectricity and high microwave dielectric permittivity in (Sr,Ce)TiO3 solid solution via reduction-controlled defect ordering	57
Influence of the ratio of sintering aids on the properties of porous Si3N4 ceramics fabricated by digital light processing	57
Insight on the growth mechanism of TiO2 nanoparticles via gaseous detonation intercepting collection	57
All-inorganic halide perovskite (CsPbX3, X=Cl, Br, I) quantum dots synthesized via fast anion hot injection by using trimethylhalosilanes	57
Engineering dual-phase FeSiCrB-CIP soft magnetic composites with simultaneously optimized MHz-range magnetic and thermal performance	57
Tailoring the photocatalytic features of Fe2O3-doped borosilicate glass-ceramics for environmental safety	57
Optimized slurry and digital light processing (DLP) type 3D printing of Ba0.65Sr0.35TiO3 (BST) functional ceramics	57