International Journal of Advanced Manufacturing Technology

Article	Citations
A study of isothermal mechanical fatigue of welded reactor steel (15H2MFA)	301
Simulation of packaging design of virtual manufacturing products based on computer vision and Big data	268
Announcement of B. John Davies Prize for the best paper published in IJAMT in 2021	225
Towards robotic assembly: collision detection between each part of the parallel groove clamp	213
A monocular-based tracking framework for industrial augmented reality applications	166
An incremental flanging strategy for small hole with electropermanent magnetic device	150
Tribological performance and corrosion resistance of HVOF WC-17 wt. % Co coatings: influence of micro-to-nanoscale morphology	140
On cutting forces considering elastic recovery accumulation in micro-milling process	134
Multi-objective parameter optimization of Ti6Al4V surface integrity for SEAM	133
Implementation of efficient surface discretisation algorithms adapted to geometric models specific to the footwear industry	132
In-process detection of miniature size holes in cold-rolled steel strips	129
Characterisation results for oxide ceramic functionally graded with cemented carbide sintered by PECS	127
Computational investigation of a novel metal thickness measurement system with coaxial triple-coil sensor for chemical mechanical polishing	127
A comparative machinability analysis of aged and freshly manufactured epoxy resins through orthogonal machining experiments	115
Finite element simulation and experimental study of non-blank holder forward and backward composite deep drawing earing test	114
Experimental and numerical study of the CO2 laser-polishing edge effect on silica surface	111
Study on the hot stamping simulation and experiment of A-pillar patchwork blanks	111
Electromagnetic tube bulging due to axial pressure produced with a rigid drive block	102
Characterization and modelling of fracture in press-hardened Ductibor® 1000-AS:Usibor® 1500-AS laser-welded blanks	98
Experimental investigations of tooth pitch variation and cutting parameters on areal surface texture in flat end milling of Fe–Ni alloy Supra50	97
Nanosecond- and picosecond-pulsed laser cutting of lithium metal anodes with copper current collector	95
Material removal characteristics of small-size polyurethane polishing wheel	90
Correction to: Influence of the scale effect on the constraint effect in welded joints with soft interlayers	88
Study on surface quality in spray-mist-assisted laser processing of tungsten carbide cobalt	88
Correction to: Cutting chatter recognition based on spectrum characteristics and extreme gradient boosting	87

An on-line contour error estimation and compensation strategy for five-axis local smoothed trajectory under motion time synchronization	86
Effect of chamfer width and chamfer angle on tool wear in slot milling	82
Theoretical and experimental study on influencing factors of rabbit ear in the gear forced throughfeed rolling process	80
Tool wear monitoring in microdrilling through the fusion of features obtained from acoustic and vibration signals	78
Surface integrity enhancement of LA103Z Mg-Li alloy by regulating microstructure and texture evolution in cutting metamorphic layer	77
Correction to: Scanning strategies for the 316L part with lattice structures fabricated by selective laser melting	75
Effects of laser process parameters on the hardness profile of AISI 4340 cylindrical samples: statistical and experimental analyses	74
Correction to: Comparison of the deformation behavior of circular hole‑flanging obtained by electromagnetic forming and stamping	74
The effect of semi-cured elements on the quality of integrated composite structures	73
Computerized image analysis in manufacturing industry anomaly detection using artificial intelligence techniques	72
Next-generation printed circuit boards manufacturing: an innovative numerical investigation using electroforming process	71
Correction to: Study on material removal mechanism and surface formation characteristics of reaction‑bonded silicon carbide by electrical discharge grinding technology	68
Reduction in barreling of hollow cylinder by ram pulsation in upsetting	66
Influences of storage pool on strain and mechanical uniformity of Mg-Gd-Y-Zn-Zr sheet produced by rotary forward extrusion	66
Electrospray of core–shell micro drug carriers with various experimental and material parameters	63
Tribological implications of spindle stability: a real-time diagnostic approach to surface quality	63
Numerical and experimental study on water jet-guided laser machining of closed-loop groove	62
An energy-concentrated synchrosqueezing transform using a reassignment operator for the analysis of nonstationary signals	62
Advanced high-precision grinding method with an inclined symmetrical twin grinding-wheels design for machining tungsten carbide microprobes	61
Experimental and simulated study of 3D-printed couplings’ suitability for industrial application	61
Optimization parameter for microgripper based on triple-stair compliant mechanism using GTs-TOPSIS	61
Study on the effect of double-sided laser welding of NiTi shape memory alloys wire	61
Surface integrity and process parameters optimization in generating grinding of spiral bevel gears	61
Optimal design of ladder-stress accelerated degradation test plan for motorized spindle in non-cube test area	60
Operational modal identification of ultra-precision fly-cutting machine tools based on least-squares complex frequency-domain method	59
Performance assessment of reinforced nanofluid with surface-active agent for machinability improvement	59
Solderability of additively manufactured pure copper and the effect of surface modification	58
Improvement on leveling ability in counter-rotating electrochemical machining by using a variable voltage	57
Passivation of grain boundary electronic activity in polycrystalline silicon thin films by heat treatment and hydrogenation	57
Numerical evaluation of the cryogenic cooling effect on compacted graphite iron during end-milling	57
Tool wear predicting based on weighted multi-kernel relevance vector machine and probabilistic kernel principal component analysis	56
A review of research influencing the surface machinability of brittle and hard materials in ultra-precision machining	55
Design, modeling, and control of a variable stiffness elbow joint	55
Robot arm grasping for cluttered fasteners based on deep learning with synthetic data augmentation	55
Hot extrusion of SiCp/Al-Cu composites: optimizing mechanical properties through microstructural control	54
Nominal digital twin for new-generation product design	53
Square groove detection based on Förstner with Canny edge operator using laser vision sensor	52
Airborne acoustic emission of an abrasive waterjet cutting system as means for monitoring the jet cutting capability	52
Design and surface analysis in large-amplitude longitudinal ultrasonic vibration-assisted milling of TC4 titanium alloy under dry conditions	51
Correction: AutoSplit: a two‑stage AI architecture for enhanced classification of manufacturing processes with a focus on the identification of additive manufacturing components	51
Fast simulation for powder bed fusion process based on thermal field pattern repetitions: application on electron beam melting process	50
Experimental and numerical study on single roller–cross wedge rolling for small diameter metal balls	50
Milling force prediction and process analysis of graphene-reinforced aluminum matrix composites based on micro-element cutting numerical simulation	50
Effect of support force on quality during double-sided incremental forming: an experimental and numerical study	50
A comparative study on the effect of deep and shallow cryogenic electrodes on tool wear rate and overcut with waste bio-oil in electric discharge machining	50
An experimental study on drill bit wear and hole quality in ultrasonic vibration-assisted drilling of carbon fiber-reinforced polyetherketoneketone composites	50
Advances in experimental and finite element simulation research on ultrasonic vibration–assisted cutting of SiCp/Al composites	50
Microwave heating and processing of solid metals using electromagnetic resonators	49
A key error identification method for five-axis tool grinders based on geometric error-trajectory error model and EFAST method	49
Fundamental study of self-propelled rotary tool for turning superalloys	49

A rapid prediction method for geometric size in profiled ring rolling process	48
An inceptive approach for designing simple digital twins and industrial metaverse process frameworks for small manufacturing I5.0 environments using Node-RED	48
Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface	47
Risk response capability assessment for the digital twin-based human–robot collaboration	47
Prediction model of machining surface roughness for five-axis machine tool based on machine-tool structure performance	47
Investigating the effects of an augmented reality-based warning system on safety and trust in human-robot collaboration	47
Discrete element method to study the subsurface crack propagation trend during vertical ultrasonic vibratory cutting of sapphire	46
Development of an ultrasonic vibration-assisted MQL device and its effects on the milling performance of ultra-high strength steel	46
Optimal design method for geometric errors of horizontal machining center based on Sobol method and IPSO	46
Optimization on initial configuration of monolithic component for machining deformation control	46
Data aggregation algorithm based on clustering for wireless sensor networks	46
Investigation on the machinability of metastable β titanium alloy M28	45
Effects of VC additive on cutting compatibility of TiB2-based cermet cutting tools and Ti6Al4V alloy	45
CNC milling cutters condition monitoring based on empirical wavelet packet decomposition	44
Laser surface texturing-based hybrid micro-milling of Ti6Al4V alloy	44
Design of a torsional stiffener for a cable-driven hyper-redundant robot composed of gear transmission joints	44
Research on thermal error of electric spindle based on ISCA-GRNN	44
Investigation of forming defects in 5A06 aluminum alloy cold stamping of thin-walled shell with corner	44
Plastic deformation mechanism of grinding subsurface of nickel-based single-crystal superalloy	44
Numerical analysis onto thermal balance behaviors of motorized spindle unit	44
Processing characteristics and loading principle on micro blanking of cavitation jet	43
Analysis of the relationship between cutting forces and local structural properties of Scots pine wood aided by computed tomography	42
Multiple perspectives integration for virtual reality-aided assemblability assessment in narrow assembly spaces	42
Optimization of selective laser melting (SLM) fabrication quality for Ti6Al4V alloy: experimental and numerical study with introduction of remelting process	42
The generation of supplementary toolpaths for surface machining based on rapid prediction of scallop height distributions	42
Influence of a suboptimal environment and sintering temperature on the mechanical properties of fused filament fabricated copper	42
Preparation, inspection, and optimization of rotary friction welding parameters for 2017aa aluminum alloy specimens	42
Machinability investigation in cylindrical lapping of AISI 52100 bearing roller based on DDSG grinding method	41
Stiffness-controlled lathe spindle for varying operating conditions	41
Impact of different annealing methods on MEX-printed polyetherketoneketone parts	41
Wire electrode insulation method for stray current and overcut reduction during WECM—a novel approach	41
Experimental investigation and optimization of trochoidal tool paths as an alternative to linear scanning patterns for enhanced build quality in direct laser metal deposition	41
Deep learning-based solder joint defect detector	41
Exploring the use of graphene lubricant and TiO2 nanolubricants in micro deep drawing of stainless steel SUS301	41
On feasibility of roll-stamp forming variable-sectional metal channels	40
Influence of rotation speed on microstructure formation during friction surfacing of AISI 316L over mild steel using a conventional CNC machining center	40
A new method for microscale forming manufacturing of Ni by light-directed electrochemical deposition	40
Evaluation of material properties and hoop residual stress in proximity welded sections of S355 steel	40
A comparative study on the die-sinking EDM performance of bulk metallic glass composites under rough and refined conditions	39
Enhancing the fatigue strength of AISI 4140 steel through in-situ urea-assisted EDM nitriding	39
On the milling strategy in machining curved surfaces based on minimum stress concentration by a 3-axis machining center	39
Optimization of shape-forming accuracy in arc-striking and arc-extinguishing areas of weld bead by torch hovering for directed energy deposition-arc manufactured nickel aluminum bronze alloy component	39
Enhancing energy management and power quality in grid-connected photovoltaic systems through ESS and STATCOM integration	39
Predicting surface roughness in dry machining of AISI H13 steel: a comparison of machine learning and GPT-based models with ceramic cutting tool	39
Roll force prediction by combined FEM and ANN in the hot rolling process under nano-lubrication condition	39
Stress and crack analysis in PBF-LB IN738 with heat treatment	39
Impact of rake angle on nanometric cutting of single crystal silicon: a molecular dynamics study	39
Generation of rule-adhering robot programs for aluminium welding automatically from CAD	39
Knowledge graph–enabled tolerancing experience acquisition and reuse for tolerance specification	39
Mechanical and microstructural characterization of aluminium micro-pins realized by cold metal transfer	38
Design and application of low-cost polymer composite shell and backfill tooling for stamping of HSS 590 sheets	38
Influence of methane flow ratios on the structural and mechanical properties of Ti-doped diamond-like carbon films	38
Towards ubiquitous data access service of 3D part library in cloud scheme with host independence	38
Cathode structure optimization and process experiment in electrochemical machining of multi-stage internal cone hole	38
Anomaly detection in three-axis CNC machines using LSTM networks and transfer learning	38
Experimental study on corner filling of B1800HS boron steel tubes in hot metal gas forming process	38
Characterization of wear and friction between X160CrMoV12 tool steel and carbon steel sheet during reciprocating sliding tests	38
Laser transmission welding of aluminum film coated with heat sealable co-polyester resin with polypropylene films for applications in food and drug packaging	38
Mathematical modeling and CFD analysis with experimental investigation of the geometry of the grooves created with CO2 laser on the polycarbonate plate	38
Design of VHF micro-EDM discharge state detection method based on energy coupling detection	38
Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires	38
Numerical investigation of tool parameter influence on the interlock forming during flat clinching process	37
Lubrication performance of nano-molybdenum disulfide as additive in drilling fluid in polycrystalline diamond compacts	37
A combined experimental and numerical approach that eliminates the non-uniqueness associated with the Johnson-Cook parameters obtained using inverse methods	37
Damage evolution mechanism of aluminum alloy stiffened cylinders during flow forming	37
Prediction and analysis of EDM performances considering random multiple-pulse discharges based on geometric optimization modeling	37
Development of the production technology of a new highly effective thermal grease	37
A digital twin modeling method for array antenna assembly performance real-time analysis	37
A novel method for damage prediction in BCF/PEEK drilling using an innovative drill tool	37
Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel	37
An unformed chip thickness approach to study the influence of process vibration on machining performance in milling	37
Ventilated surface-based lattice structures designed for polymer powder bed fusion process	37
Microstructure, hardness, and wear resistance at room and high temperature of Stellite-6/WC-6Co coatings deposited by laser cladding process	37
Design and application of laser scanning strategy for machining deep surface grooves with a continuous-wave fiber laser	37
Contrastive analysis of temperature and stress field distribution in cladding layer by the Gaussian and hollow-ring laser modes	36
Multimodal perception-fusion-control and human–robot collaboration in manufacturing: a review	36
Development and implementation of a novel split-wise model to predict the cutting forces in milling of Al2024 for minimum error	36
Comprehensive influence of ultrasonic vibration–assisted technology on material removal mechanism under the excitation of regenerative vibration in precision grinding process	36
Enhancing the bending strength of PEEK biomedical material welding parts using continuous drive friction welding with progressively increased welding area method	35
Study on debris evacuation of EDM small hole processing on titanium alloy	35

Ladle pouring process parameter and quality estimation using Mask R-CNN and contrast-limited adaptive histogram equalisation	35
Research on the sidewall penetration mechanisms of cable-type welding wire narrow gap GMAW process	35
Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite	35
Online modeling and monitoring of power consumption, aerosol emissions, and surface roughness in wire cut electric discharge machining of Ti-6Al-4 V	35
Improving performance of micro-hole EDM based on frequency detection method	35
Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing	35
Investigation on grinding temperature and heat flux distribution with grooved grinding wheels	35
Friction stir welding of aluminum to titanium: quest for optimum tool-offset, deformation of titanium, and mechanism of joint formation	35
Research on extrusion forming rule of a self-bending die of distorted channel	35
Advanced ultrasonic inspection methodologies for fitness-for-service (F.F.S) assessment of hydraulic turbines	34
Revealing the fretting corrosion degradation mechanisms of friction stir processed cold spray additively manufactured stainless steel	34
A data-driven iterative pre-compensation method of contouring error for five-axis machine tools	34
Investigation of effects of different moving heat source scanning patterns on thermo-mechanical behavior in direct energy deposition manufacturing	34
Mobile rack AS/RS dimensions optimization for single cycle time minimization	34
Influence of the roll leveler setup parameters on the quality of high-strength steel leveling operation	34
Electrochemistry-based design of electrochemical jet machining process for Al0.7CrFeCoNi high-entropy alloy	34
Taguchi-Grey multi-response optimization of wear parameter of new nanocomposite formulation of Al–Si–Mg alloy reinforced with synthesis carbon nanotube and periwinkle shell nanoparticles	34
A pragmatic optimization-based approach for analysis and configuration of a reconfigurable multi-product assembly line in the automotive industry	34
Effect of wire feed rate on ER70S-6 microstructure of wire arc additive manufacturing process	34
RETRACTED ARTICLE: Unveiling high-performance carburized mild steel using coconut shell ash and CaCO3 nanoparticles derived from periwinkle shell	33
Study on the heat input regulation mechanism of compound excitation device and its influence on arc shape and penetration behavior in GTAW	33
Numerical simulation for investigating the impact of shot peening process parameters via surface reconstruction	33
Research on automatic analysis and layout system of the stamping process for automotive panels and its key technologies	33
A novel technique to examine the corrosion resistance of FSW dissimilar aluminium alloys under three different corrosion solutions	33
Study on preparation and stiffness of NiTi shape memory alloy/2A12 aluminum alloy laminated structure	33
A progressive measurement method for extremely thin and long trimming baseline on complex surfaces	33
Preparation and analysis of a hybrid ceramic shell for investment casting	33
Application of drill bit coatings for fiber/metal stack drilling in aircraft manufacturing: a comprehensive review	33
Multiphysics modeling of particle spattering and induced defect formation mechanism in Inconel 718 laser powder bed fusion	33
Additive manufacturing defects in polymeric lattice structures: a comprehensive analysis of morphology, distribution, and printing orientation influence	33
Slicing of 150 mm silicon carbide wafers using wire-EDM with energy-based discharge control	33
Influence of discharge gap on material removal and melt pool movement in EDM discharge process	32
Numerical prediction of AISI D2 punch damage	32
Experimental and numerical study on thin silicon wafer CO2 laser cutting and damage investigation	32
Investigation of thermoforming processes of aerostructures: Simulation and microstructural analysis	32
Research on die-less spinning by spherical roller of different radius	32
A tool path planning method of continuous variable-axis plunge milling for titanium alloy thin-walled curved slots	32
Comparison of Taguchi method and grey relational analysis method in process parameter optimization for shear thickening polishing of YAG crystal	32
Kinematic analysis of ultrasonic vibration-assisted milling SiCp/Al composites and surface quantity assessment	32
A novel chatter detection method in micro-milling process using wavelet packet entropy	32
One-shot additive manufacturing of robotic finger with embedded sensing and actuation	32
A review of laser cladding monitoring and control based on the molten pool images	32
Precision dressing of arc-shaped coarse-grained diamond wheels via electrical discharge aided grinding technology	32
On the development of part-scale FEM modeling for laser powder bed fusion of AISI 316L stainless steel with experimental verification	32
Analysis of electrochemical machining of involute internal spline by foamed metal cathode	32
Mechanical behavior of carbon fiber-reinforced plastic during rotary ultrasonic machining	31
Development and optimization of a prediction system model for mechanical properties in rotary friction-welded polyamide joints using the SVM approach and GA optimization	31
Modeling and optimization of friction stir welding processes under carbon policies for low-carbon production	31
Towards an improved integrated parameter for evaluating the stability of laser powder bed fusion	31
Energy efficiency of Gaussian and ring profiles for LPBF of nickel alloy 718	31
Modeling and optimization of surface residual stress profiles in milling of aluminum 7075-T6 alloy	31
Research on ultrasonic longitudinal-torsional shank based on the giant magnetostrictive material	31
A nonlinear design method of robust PI control by using adaptive backstepping control for web winding system of reversible cold rolling mill	31
Deformation mechanics and ductile damage in burnishing process of AA6061-T6 aluminum alloy	31
Study of dynamic welding pool for AZ31B magnesium alloy with adjustable ring mode laser welding	31
Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique	31
Polyether Ketone Ketone (PEKK) matrix composites for material extrusion additive manufacturing	31
Analysis of challenges of wire-arc additive manufacturing process in the context of Industry 4.0 using graph theory approach	31
A study on porosity and mechanical properties of the open aluminum metal foam through spark plasma sintering SDP technique	30
Research on the grinding performance of a defined grain arrangement diamond grinding wheel with small grit (95 μm)	30
Optimization of process parameters during hydroforming of tank bottom using NSGA-III algorithm	30
Impact of nozzle temperature on dimensional and mechanical characteristics of low-density PLA	30
NSGA-III-based multi-objective approach for reconfigurable manufacturing system design considering single-spindle and multi-spindle modular reconfigurable machines	30
Review on high efficiency and high precision compliant polishing method	30
AI-based inspection of the axes of machine tools	30
Investigation of effect of conformal cooling inserts in high-pressure die casting of AlSi9Cu3	30
Design of process device and flow field of array electrochemical machining for small-size inner wall ring grooves	30
Fabrication and evaluation of PLA/PA-HA filament for 3D printing: towards trabecular bone-compatible biomedical applications	30
Analysis of self-tapping screw joints in fibre glass reinforced PEI polymer used in the automotive industry	30
Study of the effect of heat treatment of copper slag particles on abrasiveness for abrasive waterjet cutting	30
Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting	30
Investigations on metallurgical parameters in hypoeutectic Al–Si alloys under upward directional solidifications	30
Prediction and optimization of mechanical properties in FSWed AA6082-T6 joints using RSM and artificial neural networks	30
Determining strain-based fatigue parameters of additively manufactured Ti–6Al–4V: effects of process parameters and loading conditions	30
In-cavity pressure measurements for failure diagnosis in the injection moulding process and correlation with numerical simulation	30
A natural bare-hand interface-enabled interactive AR assembly guidance	30
Composite material performance testing and indoor decoration visualization simulation based on sensor image recognition	30
Critical force of separation effect behaviors in rotary ultrasonic drilling for SiC	30
Effects of post-weld heat treatments in microstructure, mechanical properties, and corrosion resistance of simulated heat-affected zone of supermartensitic steel UNS S41426	29
PD-adaptive variable impedance constant force control of macro-mini robot for compliant grinding and polishing	29
Simulation-based optimization of plastic transfer molding parameter for thin small outline package via response surface methodology	29
An inverse identification method for automatic estimation of heat source model parameters for laser directed energy deposition	29
Industry 4.0: review and proposal for implementing a smart factory	29
Intelligent layout optimization of reconfigurable flexible fixture for assembling multiple aircraft panels	29
Effects of shot peening and laser peening on the microstructural, mechanical, and tribological properties of Inconel 625 superalloy	29
An integrated CRITIC-COPRAS approach for multi-response optimization on AWJM of hybrid filler–reinforced polymer composite and its surface integrity	29
A data-driven smart management and control framework for a digital twin shop floor with multi-variety multi-batch production	29
Integrated computational framework for controlling dimensional accuracy of thin-walled turbine blades during investment casting	29
Space efficiency and throughput performance in AVS/RS under variant lane depths	29
Transformer-based path planning for single-arm and dual-arm robots in dynamic environments	29
A systematic method of optimization of machining parameters considering energy consumption, machining time, and surface roughness with experimental analysis	29
A maturity model for the autonomy of manufacturing systems	29
Estimating the cost of functional requirements for tolerance allocation on mechanical assemblies	28
Numerical study of the reliability of the fracture toughness determined experimentally by the IEF model, using Phimeca-soft	28
Thermal error prediction of ball screw feed system based on inverse heat transfer analysis	28