International Journal of Advanced Manufacturing Technology

Article	Citations
Announcement of B. John Davies Prize for the best paper published in IJAMT in 2021	291
A monocular-based tracking framework for industrial augmented reality applications	160
An incremental flanging strategy for small hole with electropermanent magnetic device	154
On cutting forces considering elastic recovery accumulation in micro-milling process	153
Multi-objective parameter optimization of Ti6Al4V surface integrity for SEAM	142
Implementation of efficient surface discretisation algorithms adapted to geometric models specific to the footwear industry	136
A comparative machinability analysis of aged and freshly manufactured epoxy resins through orthogonal machining experiments	136
Finite element simulation and experimental study of non-blank holder forward and backward composite deep drawing earing test	133
Nanosecond- and picosecond-pulsed laser cutting of lithium metal anodes with copper current collector	129
Tool wear monitoring in microdrilling through the fusion of features obtained from acoustic and vibration signals	114
Computerized image analysis in manufacturing industry anomaly detection using artificial intelligence techniques	109
Next-generation printed circuit boards manufacturing: an innovative numerical investigation using electroforming process	104
Reduction in barreling of hollow cylinder by ram pulsation in upsetting	101
Influences of storage pool on strain and mechanical uniformity of Mg-Gd-Y-Zn-Zr sheet produced by rotary forward extrusion	99
Tribological implications of spindle stability: a real-time diagnostic approach to surface quality	94
Fundamental study of self-propelled rotary tool for turning superalloys	93
Risk response capability assessment for the digital twin-based human–robot collaboration	93
Data aggregation algorithm based on clustering for wireless sensor networks	90
Optimization on initial configuration of monolithic component for machining deformation control	83
Deformation mechanics and ductile damage in burnishing process of AA6061-T6 aluminum alloy	80
Computational investigation of a novel metal thickness measurement system with coaxial triple-coil sensor for chemical mechanical polishing	80
Research on extrusion forming rule of a self-bending die of distorted channel	76
Analysis of self-tapping screw joints in fibre glass reinforced PEI polymer used in the automotive industry	74
Effects of post-weld heat treatments in microstructure, mechanical properties, and corrosion resistance of simulated heat-affected zone of supermartensitic steel UNS S41426	73
Wire electrode insulation method for stray current and overcut reduction during WECM—a novel approach	72

Advanced ceramic grinding process combined to hazard mitigation to the employees’ health by using an alternative lubri-refrigeration technique	72
Numerical and experimental study on water jet-guided laser machining of closed-loop groove	71
Surface integrity and process parameters optimization in generating grinding of spiral bevel gears	70
Advanced high-precision grinding method with an inclined symmetrical twin grinding-wheels design for machining tungsten carbide microprobes	70
Airborne acoustic emission of an abrasive waterjet cutting system as means for monitoring the jet cutting capability	69
Influences of pH environment on abrasive features and performance in chemical mechanical polishing Si-faces of SiC substrates	68
A novel grinding method of the clearance with unequal relief angle for taper endmill	67
Electrochemistry-based design of electrochemical jet machining process for Al0.7CrFeCoNi high-entropy alloy	67
A pragmatic optimization-based approach for analysis and configuration of a reconfigurable multi-product assembly line in the automotive industry	66
A tool path planning method of continuous variable-axis plunge milling for titanium alloy thin-walled curved slots	66
A progressive measurement method for extremely thin and long trimming baseline on complex surfaces	65
Impact of different annealing methods on MEX-printed polyetherketoneketone parts	64
Experimental investigation and optimization of trochoidal tool paths as an alternative to linear scanning patterns for enhanced build quality in direct laser metal deposition	63
On feasibility of roll-stamp forming variable-sectional metal channels	61
Enhancing the fatigue strength of AISI 4140 steel through in-situ urea-assisted EDM nitriding	60
Research on die-less spinning by spherical roller of different radius	60
Optimization of shape-forming accuracy in arc-striking and arc-extinguishing areas of weld bead by torch hovering for directed energy deposition-arc manufactured nickel aluminum bronze alloy component	60
Investigation of forming defects in 5A06 aluminum alloy cold stamping of thin-walled shell with corner	60
Experimental and numerical study on single roller–cross wedge rolling for small diameter metal balls	59
Discrete element method to study the subsurface crack propagation trend during vertical ultrasonic vibratory cutting of sapphire	58
NSGA-III-based multi-objective approach for reconfigurable manufacturing system design considering single-spindle and multi-spindle modular reconfigurable machines	58
A new method for microscale forming manufacturing of Ni by light-directed electrochemical deposition	58
Composite material performance testing and indoor decoration visualization simulation based on sensor image recognition	58
Generative network-assisted acceleration for microstructure simulation and prediction in laser-based additive manufacturing	57
Overview of the removal mechanism of brittle materials: multidimensional analysis	57
Square groove detection based on Förstner with Canny edge operator using laser vision sensor	57
Influence of rotation speed on microstructure formation during friction surfacing of AISI 316L over mild steel using a conventional CNC machining center	57
Machinability investigation in cylindrical lapping of AISI 52100 bearing roller based on DDSG grinding method	57
Correction: AutoSplit: a two‑stage AI architecture for enhanced classification of manufacturing processes with a focus on the identification of additive manufacturing components	56
Study on preparation and stiffness of NiTi shape memory alloy/2A12 aluminum alloy laminated structure	56
Correction to: Influence of the scale effect on the constraint effect in welded joints with soft interlayers	55
Correction to: Study on material removal mechanism and surface formation characteristics of reaction‑bonded silicon carbide by electrical discharge grinding technology	54
Correction to: Scanning strategies for the 316L part with lattice structures fabricated by selective laser melting	54
Correction to: Cutting chatter recognition based on spectrum characteristics and extreme gradient boosting	54
Research on ultrasonic longitudinal-torsional shank based on the giant magnetostrictive material	53
Slicing of 150 mm silicon carbide wafers using wire-EDM with energy-based discharge control	53
Digital twin and digital shadow infrastructure as drivers for industrial resilience, optimization, and inclusiveness: the case of Ethiopia’s manufacturing industry	52
Fast simulation for powder bed fusion process based on thermal field pattern repetitions: application on electron beam melting process	52
Performance assessment of reinforced nanofluid with surface-active agent for machinability improvement	51
Enhancing energy management and power quality in grid-connected photovoltaic systems through ESS and STATCOM integration	51
Plastic deformation mechanism of grinding subsurface of nickel-based single-crystal superalloy	51
Towards an improved integrated parameter for evaluating the stability of laser powder bed fusion	51
Improvement on leveling ability in counter-rotating electrochemical machining by using a variable voltage	50
Characterization and modelling of fracture in press-hardened Ductibor® 1000-AS:Usibor® 1500-AS laser-welded blanks	50
Design, modeling, and control of a variable stiffness elbow joint	50
Sustainable production scheduling during machine deterioration in wire bonding process of semiconductor assembly	50
Advances in experimental and finite element simulation research on ultrasonic vibration–assisted cutting of SiCp/Al composites	50
A novel technique to examine the corrosion resistance of FSW dissimilar aluminium alloys under three different corrosion solutions	50
Study on surface quality in spray-mist-assisted laser processing of tungsten carbide cobalt	49
Effects of shot peening and laser peening on the microstructural, mechanical, and tribological properties of Inconel 625 superalloy	49

Cold-start quality prediction in multi-machine manufacturing systems via weak-consistency data fusion with human-in-the-loop learning	49
Geometry-induced melt-plug sealing: a test methodology and design for porous PC/SORPLAS composites	48
Stress and crack analysis in PBF-LB IN738 with heat treatment	48
Tool wear predicting based on weighted multi-kernel relevance vector machine and probabilistic kernel principal component analysis	48
Experimental study on corner filling of B1800HS boron steel tubes in hot metal gas forming process	48
Robot arm grasping for cluttered fasteners based on deep learning with synthetic data augmentation	47
Exploring the use of graphene lubricant and TiO2 nanolubricants in micro deep drawing of stainless steel SUS301	47
Study on non-axisymmetric mandrel-less spinning for cylindrical parts with a V-shaped groove	47
Experimental and simulated study of 3D-printed couplings’ suitability for industrial application	47
A key error identification method for five-axis tool grinders based on geometric error-trajectory error model and EFAST method	46
Milling stability of thin-walled components assisted by magnetorheological support	46
Design of process device and flow field of array electrochemical machining for small-size inner wall ring grooves	46
An experimental study on drill bit wear and hole quality in ultrasonic vibration-assisted drilling of carbon fiber-reinforced polyetherketoneketone composites	46
Order resource allocation-based manufacturing reliability optimization in forging process	46
Analysis of challenges of wire-arc additive manufacturing process in the context of Industry 4.0 using graph theory approach	45
A rapid prediction method for geometric size in profiled ring rolling process	45
Analysis of electrochemical machining of involute internal spline by foamed metal cathode	45
An inverse identification method for automatic estimation of heat source model parameters for laser directed energy deposition	45
Design of VHF micro-EDM discharge state detection method based on energy coupling detection	45
Innovative additive manufacturing approach to 3D printing conformal cooling channels for hot forging dies	44
Simulation-based optimization of plastic transfer molding parameter for thin small outline package via response surface methodology	44
Hot extrusion of SiCp/Al-Cu composites: optimizing mechanical properties through microstructural control	44
Solderability of additively manufactured pure copper and the effect of surface modification	44
On the development of part-scale FEM modeling for laser powder bed fusion of AISI 316L stainless steel with experimental verification	44
Research on 5-axis non-supporting adaptive slicing method based on skeleton curve	43
Damage evolution mechanism of aluminum alloy stiffened cylinders during flow forming	43
Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires	43
Processing characteristics and loading principle on micro blanking of cavitation jet	43
Tribomechanical analysis and machining development for TiSiCN material deposited on industrial steel	43
AI-based inspection of the axes of machine tools	43
Design and application of laser scanning strategy for machining deep surface grooves with a continuous-wave fiber laser	42
A novel method for damage prediction in BCF/PEEK drilling using an innovative drill tool	42
Research on automatic analysis and layout system of the stamping process for automotive panels and its key technologies	42
Mechanical and microstructural characterization of aluminium micro-pins realized by cold metal transfer	42
Design and application of low-cost polymer composite shell and backfill tooling for stamping of HSS 590 sheets	42
Development and implementation of a novel split-wise model to predict the cutting forces in milling of Al2024 for minimum error	42
Influence of a suboptimal environment and sintering temperature on the mechanical properties of fused filament fabricated copper	42
Critical force of separation effect behaviors in rotary ultrasonic drilling for SiC	41
Mathematical modeling and CFD analysis with experimental investigation of the geometry of the grooves created with CO2 laser on the polycarbonate plate	41
Comparison of Taguchi method and grey relational analysis method in process parameter optimization for shear thickening polishing of YAG crystal	41
Simulation of packaging design of virtual manufacturing products based on computer vision and Big data	41
Study of the effect of heat treatment of copper slag particles on abrasiveness for abrasive waterjet cutting	41
Preparation, inspection, and optimization of rotary friction welding parameters for 2017aa aluminum alloy specimens	41
RETRACTED ARTICLE: Unveiling high-performance carburized mild steel using coconut shell ash and CaCO3 nanoparticles derived from periwinkle shell	41
Effect of support force on quality during double-sided incremental forming: an experimental and numerical study	40
Leveraging the internet of things to enhance skill acquisition in lean manufacturing practices: an experimental study	40
Preparation and analysis of a hybrid ceramic shell for investment casting	40
Multiphysics modeling of particle spattering and induced defect formation mechanism in Inconel 718 laser powder bed fusion	40
Numerical simulation of ultrasound assisted powder feed flow in coaxial nozzle used in direct metal deposition process	40
The generation of supplementary toolpaths for surface machining based on rapid prediction of scallop height distributions	40
Evaluation of TPMS lattice parameters on the mechanical properties of lightweight gears produced by additive manufacturing	40
SSF: segment skeleton filtering method to generate a clean direction for automatic blasting robots in shipbuilding	40
Determining strain-based fatigue parameters of additively manufactured Ti–6Al–4V: effects of process parameters and loading conditions	39
Experimental and numerical study on thin silicon wafer CO2 laser cutting and damage investigation	39
Mirror milling datum reconstruction and trajectory adjustment method based on combined global and local measurement	39
Development and optimization of a prediction system model for mechanical properties in rotary friction-welded polyamide joints using the SVM approach and GA optimization	39
Characterisation results for oxide ceramic functionally graded with cemented carbide sintered by PECS	39
Generation of rule-adhering robot programs for aluminium welding automatically from CAD	39
Experimental and numerical study of the CO2 laser-polishing edge effect on silica surface	39
Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting	39
Kinematic analysis of ultrasonic vibration-assisted milling SiCp/Al composites and surface quantity assessment	39
Milling force prediction and process analysis of graphene-reinforced aluminum matrix composites based on micro-element cutting numerical simulation	39
A digital twin modeling method for array antenna assembly performance real-time analysis	38
Modeling and optimization of friction stir welding processes under carbon policies for low-carbon production	38
Investigation on the mechanical and environmental behaviour of 3D-printed molds for manufacturing of CFRP components	38
Correction to: A comprehensive method to optimize 3 + 2 axis end-milling of free-form surfaces with a toroidal cutter	38
Numerical prediction of AISI D2 punch damage	38
Tribological performance and corrosion resistance of HVOF WC-17 wt. % Co coatings: influence of micro-to-nanoscale morphology	38
Integrated computational framework for controlling dimensional accuracy of thin-walled turbine blades during investment casting	38
Optimal design of ladder-stress accelerated degradation test plan for motorized spindle in non-cube test area	38
Theoretical and experimental study on influencing factors of rabbit ear in the gear forced throughfeed rolling process	37
Application of drill bit coatings for fiber/metal stack drilling in aircraft manufacturing: a comprehensive review	37
Forming challenges of small and complex fiber metal laminate parts in aerospace applications—a review	37
A review of plasma-assisted machining of difficult-to-machine materials: mechanisms, processes, and surface integrity	37
Design of a torsional stiffener for a cable-driven hyper-redundant robot composed of gear transmission joints	37
Success of hybrid materials 3D printing, technological insights and risk assessment: a critical review	37
An inceptive approach for designing simple digital twins and industrial metaverse process frameworks for small manufacturing I5.0 environments using Node-RED	37
State-of-the-art review on grinding wheel wear measurement: from traditional techniques to intelligent sensing and future outlook	36
Laser surface texturing-based hybrid micro-milling of Ti6Al4V alloy	36
First-time-right printing of compliant mechanisms manufactured with standard Laser Powder Bed Fusion process parameters: An investigation of the impact of manufacturing defects on the stiffness of thi	36

Material removal characteristics of small-size polyurethane polishing wheel	36
Numerical simulation for investigating the impact of shot peening process parameters via surface reconstruction	35
Optimization of selective laser melting (SLM) fabrication quality for Ti6Al4V alloy: experimental and numerical study with introduction of remelting process	35
Evaluation of material properties and hoop residual stress in proximity welded sections of S355 steel	35
Design and surface analysis in large-amplitude longitudinal ultrasonic vibration-assisted milling of TC4 titanium alloy under dry conditions	35
In-process detection of miniature size holes in cold-rolled steel strips	35
Ventilated surface-based lattice structures designed for polymer powder bed fusion process	35
Influence of methane flow ratios on the structural and mechanical properties of Ti-doped diamond-like carbon films	35
Adaptable multi-objective optimization framework: application to metal additive manufacturing	35
Development of an ultrasonic vibration-assisted MQL device and its effects on the milling performance of ultra-high strength steel	34
Influence of process parameters on shape fidelity in extrusion-based bioprinting: a rheological perspective	34
Machining of WAAM-cladded Inconel 625 for energy components: influence of cutting conditions and tool geometry	34
Predicting surface roughness in dry machining of AISI H13 steel: a comparison of machine learning and GPT-based models with ceramic cutting tool	34
Intelligent layout optimization of reconfigurable flexible fixture for assembling multiple aircraft panels	34
Knowledge graph–enabled tolerancing experience acquisition and reuse for tolerance specification	34
Analysis of the effects of FDM printing parameters on mechanical properties of parts manufactured with a new type of PLA	34
Friction stir welding of aluminum to titanium: quest for optimum tool-offset, deformation of titanium, and mechanism of joint formation	34
Transformer-based path planning for single-arm and dual-arm robots in dynamic environments	34
A novel autonomous guidance method for welding robot based on point cloud registration and 3D vision	33
Revealing the fretting corrosion degradation mechanisms of friction stir processed cold spray additively manufactured stainless steel	33
Sustainable binder systems in metal injection molding of 316 l stainless steel: A critical review and process-oriented perspective	33
Impact of rake angle on nanometric cutting of single crystal silicon: a molecular dynamics study	33
Mechanical behavior of carbon fiber-reinforced plastic during rotary ultrasonic machining	33
Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing	33
Passivation of grain boundary electronic activity in polycrystalline silicon thin films by heat treatment and hydrogenation	33
Analysis of the relationship between cutting forces and local structural properties of Scots pine wood aided by computed tomography	33
Enhancing the bending strength of PEEK biomedical material welding parts using continuous drive friction welding with progressively increased welding area method	33
Advanced ultrasonic inspection methodologies for fitness-for-service (F.F.S) assessment of hydraulic turbines	33
Surface integrity enhancement of LA103Z Mg-Li alloy by regulating microstructure and texture evolution in cutting metamorphic layer	32
Multi-objective adaptive trend optimization for integrated robotic assembly line balancing and agv scheduling	32
Research on feed rate planning of rotating polishing blades for industrial robots	32
A data-driven iterative pre-compensation method of contouring error for five-axis machine tools	32
Tool wear prediction of longitudinal-torsional ultrasonic assisted milling based on IPSO-LSSVR-AdaBoost	32
Ladle pouring process parameter and quality estimation using Mask R-CNN and contrast-limited adaptive histogram equalisation	32
Roll force prediction by combined FEM and ANN in the hot rolling process under nano-lubrication condition	32
Microwave heating and processing of solid metals using electromagnetic resonators	32
Multi-stage error compensation with closed-loop quality control in five-axis flank milling of sculptured surface	32
Investigation of thermoforming processes of aerostructures: Simulation and microstructural analysis	32
Lubrication performance of nano-molybdenum disulfide as additive in drilling fluid in polycrystalline diamond compacts	32
Contrastive analysis of temperature and stress field distribution in cladding layer by the Gaussian and hollow-ring laser modes	32
Evaluation of mechanical and water absorption properties of kevlar/carbon/basalt fibers reinforced nano cellulose particulates Bisphenol-F LY556 epoxy composite	32
Investigation on grinding temperature and heat flux distribution with grooved grinding wheels	32
Study of dynamic welding pool for AZ31B magnesium alloy with adjustable ring mode laser welding	31
Stiffness-controlled lathe spindle for varying operating conditions	31
Anomaly detection in three-axis CNC machines using LSTM networks and transfer learning	31
Impact of nozzle temperature on dimensional and mechanical characteristics of low-density PLA	31
Energy efficiency of Gaussian and ring profiles for LPBF of nickel alloy 718	31
Prediction and optimization of mechanical properties in FSWed AA6082-T6 joints using RSM and artificial neural networks	31
Numerical investigation of tool parameter influence on the interlock forming during flat clinching process	31
A novel electroplastic-assisted ploughing extrusion-cutting (EAPE-C) method for fabricating structured fins: morphological evolution and chip formation mechanism	31
Experimental investigations of tooth pitch variation and cutting parameters on areal surface texture in flat end milling of Fe–Ni alloy Supra50	31
Microstructure, hardness, and wear resistance at room and high temperature of Stellite-6/WC-6Co coatings deposited by laser cladding process	31
Additive manufacturing defects in polymeric lattice structures: a comprehensive analysis of morphology, distribution, and printing orientation influence	31
Study on the heat input regulation mechanism of compound excitation device and its influence on arc shape and penetration behavior in GTAW	31
A data-driven smart management and control framework for a digital twin shop floor with multi-variety multi-batch production	31
Numerical analysis onto thermal balance behaviors of motorized spindle unit	31
Research on thermal error of electric spindle based on ISCA-GRNN	31
In-cavity pressure measurements for failure diagnosis in the injection moulding process and correlation with numerical simulation	30
Nominal digital twin for new-generation product design	30
Deep learning-based multi-modal fusion with three-mode optical illumination for robust printed circuit board assembly defect detection	30
Optimal design method for geometric errors of horizontal machining center based on Sobol method and IPSO	30
The effect of semi-cured elements on the quality of integrated composite structures	30
Investigating the effects of an augmented reality-based warning system on safety and trust in human-robot collaboration	30
Vibration suppression of industrial robots with rigid-flexible coupling dynamics: a torque derivative compensation method	30
Predictive maintenance in cyber-physical systems: a comprehensive review of applications, approaches, and challenges	30
A study on porosity and mechanical properties of the open aluminum metal foam through spark plasma sintering SDP technique	30
A natural bare-hand interface-enabled interactive AR assembly guidance	30
PD-adaptive variable impedance constant force control of macro-mini robot for compliant grinding and polishing	30
An integrated CRITIC-COPRAS approach for multi-response optimization on AWJM of hybrid filler–reinforced polymer composite and its surface integrity	30
Development of the production technology of a new highly effective thermal grease	30
A nonlinear design method of robust PI control by using adaptive backstepping control for web winding system of reversible cold rolling mill	30
Attention-enhanced deep learning framework with explainability and transfer learning for X-ray inspection	30
CNC milling cutters condition monitoring based on empirical wavelet packet decomposition	30
A novel chatter detection method in micro-milling process using wavelet packet entropy	30
Numerical evaluation of the cryogenic cooling effect on compacted graphite iron during end-milling	30
Modeling and optimization of surface residual stress profiles in milling of aluminum 7075-T6 alloy	30
Study on the constant force control of aero-engine blade grinding robot considering time delay	30
Characterization of wear and friction between X160CrMoV12 tool steel and carbon steel sheet during reciprocating sliding tests	30
A maturity model for the autonomy of manufacturing systems	30
Polyether Ketone Ketone (PEKK) matrix composites for material extrusion additive manufacturing	30
Deep learning-based solder joint defect detector	29
Precision dressing of arc-shaped coarse-grained diamond wheels via electrical discharge aided grinding technology	29
Fabrication and evaluation of PLA/PA-HA filament for 3D printing: towards trabecular bone-compatible biomedical applications	29
Additive friction stir deposition of al 7075 parts and the effect of heat treatment on microstructure, electroconductivity, and mechanical properties	29
Industry 4.0: review and proposal for implementing a smart factory	29
Review on high efficiency and high precision compliant polishing method	29
Space efficiency and throughput performance in AVS/RS under variant lane depths	29
One-shot additive manufacturing of robotic finger with embedded sensing and actuation	29
Electrospray of core–shell micro drug carriers with various experimental and material parameters	29
Multimodal perception-fusion-control and human–robot collaboration in manufacturing: a review	29
Trochoidal milling technology in the machining of difficult-to-machine materials	29
A review of research influencing the surface machinability of brittle and hard materials in ultra-precision machining	29
Analysis of the potential of thermoelectric generators for waste heat recovery from vertical surfaces	29
Comprehensive influence of ultrasonic vibration–assisted technology on material removal mechanism under the excitation of regenerative vibration in precision grinding process	29
Effect of wire feed rate on ER70S-6 microstructure of wire arc additive manufacturing process	29