International Journal of Materials & Product Technology

Article	Citations
Multi-criteria decision-making approaches for aircraft-material selection problem	7
Research on residual life prediction method of lithium ion battery for pure electric vehicle	6
Effect of machining parameters on surface roughness and white layer during magnetic field assisted powder mixed EDM of AA6061	5
Optimal design of the key structure of planetary concrete mixers based on EDEM	5
Multi-objective optimisation for indentation rate, nugget diameter and tensile load in resistance spot welding using Taguchi-based grey relational analysis	5
The effect of MnO<SUB align="right">2 concentration on the formation of MnO<SUB align="right">2/ZnO thin films with bifunctional thermal insulation and photocatalytic self-cleaning perform	4
Assessment of open hole flexural strength and progressive damage mechanism of CFRP composite as a function of stacking sequence	4
Research on early warning of rolling bearing wear failure based on empirical mode decomposition	4
Effect of graphene coating on the microstructure and mechanical properties of tungsten inert gas surface melted AISI-316L steel	4
Prediction of corrosion properties of LENS<SUP align="right">TM</SUP> deposited cobalt, chromium and molybdenum alloy using artificial neural networks	4
A comparative study on the photodegradation efficiency of TiO<SUB align="right">2-CS hybrid beads under wet and dry conditions	4
Micro-magnetic characterisation of ground AISI D2 tool steel using hysteresis loop technique	4
Preparation of graphene reinforced aluminium composites: investigation of microstructural, electrical conductivity and microhardness behaviour	3
Study of modified joint configuration in friction stir welding of dissimilar Al-Mg plates	3
Influence of fibre type on unconfined compressive strength of fibre-reinforced cemented soil under freeze-thaw cycling	3
Development and investigation of non-asbestos organic friction materials with coconut shell powder as filler	3
Research on low-temperature crack resistance of toughened epoxy asphalt mixture	3
Synergy of wood ash on mechanical and sliding wear properties of banana/walnut-based epoxy composites and optimisation with grey relational analysis	3
Batch and column investigation of copper(II) removal from aqueous media onto biochar prepared from <i>Limonia acidissima</i> shell	2
Study on mechanical properties testing of highway concrete pavement construction machinery materials	2
Determinants of innovation cooperation for manufacturing SMEs: evidence from a systematic review of the literature (1992-2015)	2
Mechanical properties of <i>Cissus quadrangularis</i> stem fibre reinforced isophthalic polyester composites	2
Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates	2
Consolidation of Al-5083 alloy powders by ECAP	2
A time-dependent swelling constitutive model for reliability analysis of anhydrite tunnel	2

Experimental investigation on the effect of process parameters on machinability and surface integrity during end milling of Mg-TiO<SUB align="right">2 nanocomposite	2
Simulation study on compressive strength and elastic modulus of concrete under multiaxial stress	1
Degradation of swollen NR/EPDM filled with graphene nanoplatelets in different types of service oils for engine mounting	1
Failure analysis of a broken SA564 stainless steel pump shaft	1
Fibre reinforcement in fused filament fabrication and sustainability: a literature review and future research agenda	1
Tribological properties of MoS2 thin films deposited by RF magnetron sputtering technique	1
Optimisation of low-weight cargo UAV with real-time controller by CAD design, FEM simulation and dynamic modelling	1
Research on structure optimisation method of 3D printer based on decoupling parallel connection	1
An exhaustive review on intelligent computer-aided process planning in context with various optimisation techniques (OPTE-2021-1994)	1
Dynamic tensile fracture test of semi flexible epoxy asphalt concrete	1
Tribological performance of various blends of commercial SAE 40 oil and novel apricot oil-based bio-lubricant using a four-ball tester tribometer	1
Pyroelectric and hygrothermal couplings effects on dynamic active control analysis of coupled thermopiezoelastic composite plate	1
Tribological properties of MoS<SUB align="right">2 thin films deposited by RF magnetron sputtering technique	1
Numerical simulation of material wear of an automotive brake device based on finite element simulation	1
Damping properties of pre-stressed shape-memory polymer sandwich beam	1
Identification of strain-rate-dependent hardening model for aluminium alloy sheet in electromagnetic forming	1
Calculation method for ultimate bearing capacity of reinforced concrete beams based on unified strength theory	1
Synthesis and evaluation of mechanical of AA 6063/MgO+Flyash (Al<SUB align="right">2O<SUB align="right">3) hybrid surface composite by friction stir processing	1
Probabilistic seismic risk assessment of hybrid fibre-reinforced concrete bridge columns	1
Application of high performance carbon nanotube cement-based composites in optimisation design of civil building structures	1
Evaluation of in-soil creep characteristics of HDPE geogrid using the time-stress superposition method	1
A control method of energy consumption of thermal insulation material for exterior wall of green building based on load prediction	1
The different electroplastic effects of cutting directions during the turning process of Ti-6Al-4V titanium alloy	1
Effect of field shaper tapered angle on the electromagnetic crimping of tubes on rods	1
Effect of low-temperature isothermal holding on microstructure and mechanical properties of hot rolled high carbon Nb microalloyed steel plate	1
Effect of untreated and deep cryotreated tungsten carbide electrodes on PMEDM performance of AISI 304 stainless steel	1
Effectiveness of green manufacturing in resolving environmental issues: a review	1
The effect of the double-horizontal-shaft vibrating mixing on the performance of UHPC	1
Response surface method for optimisation of SLA processing parameters	1
Investigations on performance characteristics of hybrid peripheral surface grinding on Al/Al<SUB align="right">2O<SUB align="right">3p/B<SUB align="right">4Cp hybrid metal matrix com	1
Distinguishing process - impact of down milling and up milling in machining aluminium thin wall	1
Comparative analysis of different multi-criteria decision-making techniques for materials selection of filler reinforced thermoplastic composite	1
Effect of polyvinyl alcohol to starch ratio on the nutrient release and water absorption behaviour of slow release fertiliser	1
Research on simulation experiment of the corn seed precision metering device based on Pro/E	1
Optimisation of mix proportions for the cemented sand and gravel in cold region	1
Influence of weight ratio of conductive additive to binder in an electrode on the capacity of Li-ion battery	1
Fatigue crack detection of heavy duty railway track based on decision fusion analysis	1
Topology optimisation of crankshaft for weight reduction possibility in farming tractor	1
Fatigue strength estimation of single self-piercing riveted joints of steel and aluminium plates under different loading modes	1
Filling method of thin shell 3D printing material based on implicit surface	1
Nickel-based overlay materials: recent developments, characteristic effects and applicability with plasma transferred arc welding	1
Photon Doppler velocimetry measurements of the impact velocity during electromagnetic pulse welding of copper-steel tubular joints	1
Research on simulation experiment of the corn seed precision metering device based on Pro/E	0
Study of modified joint configuration in friction stir welding of dissimilar Al-Mg plates	0
Batch and column investigation of copper(II) removal from aqueous media onto biochar prepared from Limonia acidissima shell	0
Experimental investigations for the characterisation of an SMA-bias spring actuator in a flexible tube manipulator	0
Effect of field shaper tapered angle on the electromagnetic crimping of tubes on rods	0
Fatigue life of aircraft structure in corrosion and pollution environment	0
Effect of annealing process on microstructure and mechanical property of medium-manganese TRIP steel	0
Environmental protection evaluation of new inorganic non-metallic building materials based on principal component analysis	0

Evaluation of in-soil creep characteristics of HDPE geogrid using the time-stress superposition method	0
Experimental studies of the interfacial shear mechanical behaviour of geosynthetics-soil	0
Structural optimisation method of six degrees of freedom manipulator based on finite element analysis	0
Influence of superimposition of high frequency current to CC-GTAW and PC-GTAW welding producing superior characteristics of weld joints of SDSS	0
Study on static moisture absorption characteristics of porous humidity regulating ceramic building materials	0
Synthesis, characterisation and qualification of high performance phenolic/carbon random-fibre oriented ablative thermal protection composite for re-entry applications	0
The mechanical properties and microstructure of 1000 MPa Grade Cu-Ni TRIP Steel at different bainitic isothermal temperatures	0
Investigation of corrosion behaviour of boronised cold rolled high manganese steel	0
Topology optimisation of crankshaft for weight reduction possibility in farming tractor	0
Experimental investigations for the characterisation of an SMA-bias spring actuator in a flexible tube manipulator	0
Multi-objective optimisation of plastic injection moulding process using mould flow analysis and response surface methodology	0
Plastic behaviour of SUS304 stainless steel tubes under intermittent uniaxial tensile loading	0
Numerical investigation of bipolar plates manufactured using hydroforming process	0
A comparative study on the photodegradation efficiency of TiO2-CS hybrid beads under wet and dry conditions	0
Research on numerical simulation method of preparation process of highly active photocatalytic nanomaterials	0
Dynamic tensile fracture test of semi flexible epoxy asphalt concrete	0
Monitoring performance analysis of composite chemical rubber materials under environmental pollution conditions based on nanomaterials chemical sensors	0
Synthesis of Ni/Ti thin film by magnetron sputtering to study the effect of annealing time on microstructure and mechanical properties	0
Fatigue life of aircraft structure in corrosion and pollution environment	0
Research on structure optimisation method of 3D printer based on decoupling parallel connection	0
Synthesis and mechanical characterisation of self-lubricating Al7075/MoS2/ZrB2 hybrid composite	0
Synthesis and mechanical characterisation of self-lubricating Al7075/MoS<SUB align="right">2/ZrB<SUB align="right">2 hybrid composite	0
The investigation of coated layers on surface of ferritic stainless steel by using atmospheric plasma spray method	0
Atomistic simulation of bicrystal behaviour with 5 grain boundary parallel to nanometric cutting direction	0
Environmental protection evaluation of new inorganic non-metallic building materials based on principal component analysis	0
Effect of process parameters on impact strength and hardness of FDM printed ABS parts	0
Effects of physical and chemical properties of ceramic hand moulds on natural rubber latex glove film formation	0
The investigation of coated layers on the surface of ferritic stainless steel by using atmospheric plasma spray method	0
Fatigue life estimation of metal materials based on finite element analysis	0
Experimental and statistical analysis of apricot (prunus armeniaca) oil based biolubricant under various temperature conditions.	0
Damage and crack detection of self-compacting concrete based on fuzzy analytic hierarchy process	0
RF sputtered hexagonal boron nitride film-based printed circuit board for high voltage and high-power electronic applications	0
Fatigue life estimation of metal materials based on finite element analysis	0
Response surface method for optimisation of SLA processing parameters	0
Multi-criteria decision making approaches for aircraft material selection problem	0
Use of sintered fly ash aggregate in pervious concrete	0
MCDM-based analysis of factors affecting core functional competencies in Indian manufacturing industry	0
Bayesian based durability life prediction method of nano-modified concrete	0
Fatigue life analysis using wavelet-based signal decomposition	0
Study on the machinability of high-silicon high-carbon graphite-based free-cutting steel in contour turning	0
Development and investigation of non-asbestos organic friction materials with coconut shell powder as filler	0
Experimental and finite element analyses for residual stress prediction of welded SAE-1018 steel joints	0
Processing of natural lignocellulosic coir fibres for enhanced flame retardancy using aluminium trihydrate	0
Multi-project management of key chain of carbon fibre and composite materials based on chaos particle swarm optimisation	0
Influence of fibre type on unconfined compressive strength of fibre-reinforced cemented soil under freeze-thaw cycling	0
Experimental study on adsorption properties of functional magnetic nano materials for heavy metal pollutants	0
Flexural behaviour of CFRP RC beams having a ductile cementitious composite layer in compression zone: an analytical study	0
Numerical and experimental investigation on the shapes of the sonotrode during ultrasonic welding	0
Effect of process parameters on impact strength and hardness of FDM printed ABS parts	0
Experimental study on impact compression performance of expressway concrete	0
Prediction of corrosion properties of LENS<SUP align="right">TM</SUP> deposited cobalt, chromium and molybdenum alloy using artificial neural networks	0
Numerical simulation analysis of bearing capacity of reinforced concrete high-pressure members	0
Properties of nano composite modified phenolic foam and its application in architectural design	0
Optimising the drilling process parameters of Kevlar-epoxy composite material using the experimental design-based goal programming approach	0
Simulation study on compressive strength and elastic modulus of concrete under multiaxial stress	0
Research on optimisation design using material substitution and its products	0
Material selection and parametric modelling of laminated composite beam for piezoelectric energy harvesting	0
Plastic behaviour of SUS304 stainless steel tubes under intermittent uniaxial tensile loading	0
A patch discrete material optimisation method for ply layout of wind turbine blades based on stiffness matrix material interpolation	0
Investigations on performance characteristics of hybrid peripheral surface grinding on Al/Al<SUB align="right">2O<SUB align="right">3p/B<SUB align="right">4Cp hybrid metal matrix com	0
Effect of machining parameters on surface roughness and white layer during magnetic field assisted powder mixed EDM of AA6061	0
Experimental studies of the interfacial shear mechanical behaviour of geosynthetics-soil	0
Numerical simulation analysis of bearing capacity of reinforced concrete high-pressure members	0
Research on numerical simulation of wear temperature field of vehicle brake disc based on SIFI feature	0
Research on the method of engineering construction recycling material project management based on BIM technology	0
Multi-objective optimisation for indentation rate, nugget diameter and tensile load in resistance spot welding using Taguchi-based grey relational analysis	0
RSM-based optimisation of machining forces and surface roughness when laser-assisted turning Nitinol alloy	0
Performance analysis of automotive braking friction materials based on surface roughness	0
A patch discrete material optimisation method for ply layout of wind turbine blades based on stiffness matrix material interpolation	0
Influence of weight ratio of conductive additive to binder in an electrode on the capacity of Li-ion battery	0
Optimal design of the key structure of planetary concrete mixers based on EDEM	0
Analytical, numerical and experimental analysis of double collar collet chuck holder by combined extrusion and forging processes	0
Degradation of swollen NR/EPDM filled with graphene nanoplatelets in different types of service oils for engine mounting	0
Application of environmental protection decoration materials in interior decoration engineering	0
Preparation of graphene reinforced aluminium composites: investigation of microstructural, electrical conductivity and microhardness behaviour	0
Research on characteristics and micro defects of ceramic dielectric energy storage	0
A fuzzy control method for optimal cutting temperature of pure iron	0
RSM-based optimisation of machining forces and surface roughness when laser-assisted turning Nitinol alloy	0
Study on damage fatigue test method of metal materials for rotating machinery	0
Leakage current detection method of electrical insulation materials based on Windowed-added Fourier transform	0

Fatigue strength estimation of single self-piercing riveted joints of steel and aluminium plates under different loading modes	0
Analysis of rheological characteristics of cement mortar based on microstructure	0
Leakage current detection method of electrical insulation materials based on windowed-added Fourier transform	0
Study on detection of dent defects of polariser based on deep convolutional generative adversarial network	0
Comparative analysis of different multi-criteria decision-making techniques for materials selection of filler reinforced thermoplastic composite	0
Synthesis and structural study of conductive polyaniline using a new method for average mass determination with ultraviolet spectroscopy	0
Optimisation of low-weight cargo UAV with real-time controller by CAD design, FEM simulation and dynamic modelling	0
Research on numerical simulation method of preparation process of highly active photocatalytic nanomaterials	0
Analysis of rheological characteristics of cement mortar based on microstructure	0
The performance of self-compacting recycled concrete short column of steel tube for construction	0
Improving CNTs properties using computational intelligence algorithms	0
The effect of the double-horizontal-shaft vibrating mixing on the performance of UHPC	0
Research on the bearing capacity of epoxy resin composite under axial compression based on pull rod-arch model	0
Analysis of multi-layer solid lubricating film on improving the corrosion resistance of transmission gears	0
Stiffness analysis of automobile aluminium alloy frame based on finite element model	0
Buckling of axially compressed cones with uneven length	0
Effect of untreated and deep cryotreated tungsten carbide electrodes on PMEDM performance of AISI 304 stainless steel	0
Fatigue life analysis using wavelet-based signal decomposition	0
The performance of self-compacting recycled concrete short column of steel tube for construction	0
Fracture toughness analysis of nano steel fiber reinforced concrete based on improved locust algorithm	0
Research on optimisation design using material substitution and its products	0
Investigation of polishing parameters and slurry composition on germanium chemical mechanical planarisation using response surface methodology	0
Synthesis and structural study of conductive polyaniline using a new method for average mass determination with ultraviolet spectroscopy	0
Research on early warning of rolling bearing wear failure based on empirical mode decomposition	0
Detection method of interface defects of titanium nitride thin film coating materials based on image processing	0
A causal time-varying analysis method for assessing impacts of cracks on service states of concrete dams	0
Study on the machinability of high-silicon high-carbon graphite-based free-cutting steel in contour turning	0
Structural optimisation method of six degrees of freedom manipulator based on finite element analysis	0
Investigation of polishing parameters and slurry composition on germanium chemical mechanical planarisation using response surface methodology	0
Compressive behaviour and energy absorption capacity of a lattice structure generated by topology optimisation	0
Use of sintered fly ash aggregate in pervious concrete	0
Synthesis and evaluation of mechanical of AA 6063/MgO+Flyash (Al<SUB align="right">2O<SUB align="right">3) hybrid surface composite by friction stir processing	0
Numerical and experimental investigation on the shapes of the sonotrode during ultrasonic welding	0
Material selection and parametric modelling of laminated composite beam for piezoelectric energy harvesting	0
Study on static moisture absorption characteristics of porous humidity regulating ceramic building materials	0
Study on damage fatigue test method of metal materials for rotating machinery	0
Image recognition method of surface defects of prefabricated concrete members in prefabricated building	0
Effect of low-temperature isothermal holding on microstructure and mechanical properties of hot rolled high carbon Nb microalloyed steel plate	0
Distinguishing process - impact of down milling and up milling in machining aluminium thin wall	0
The effect of MnO2 concentration on the formation of MnO2/ZnO thin films with bifunctional thermal insulation and photocatalytic self-cleaning performance	0
Identification of strain-rate-dependent hardening model for aluminium alloy sheet in electromagnetic forming	0
Fracture toughness analysis of nano steel fibre reinforced concrete based on improved locust algorithm	0
Experimental investigation on the effect of process parameters on machinability and surface integrity during end milling of Mg-TiO2 nanocomposite	0
Nickel-based overlay materials: recent developments, characteristic effects and applicability with plasma transferred arc welding	0
An analysis of mechanical properties of inorganic non-metallic materials for civil buildings	0
Optimisation of mix proportions for the cemented sand and gravel in cold region	0
An exhaustive review on intelligent computer-aided process planning in context with various optimisation techniques (OPTE-2021-1994)	0
Effect of repairing sports meniscus damage based on functional nano materials	0
Damage and crack detection of self-compacting concrete based on fuzzy analytic hierarchy process	0
Probabilistic seismic risk assessment of hybrid fibre-reinforced concrete bridge columns	0
Residual life prediction of thermal insulation material for cold chain logistics transportation vehicle	0
Mechanical properties of <i>Cissus quadrangularis</i> stem fibre reinforced isophthalic polyester composites	0
Temperature variation depending on cutting conditions and its effects on thrust force in micro-drilling of CFRP laminates	0
Study on mechanical properties testing of highway concrete pavement construction machinery materials	0
Experimental study on impact compression performance of expressway concrete	0
Filling method of thin shell 3D printing material based on implicit surface	0
Statistical and experimental evaluation of multi-performance in turning of AISI D6 using Grey relational analysis	0
Microstructure observation and viscoelastic relationship of surface modified rubber composites	0
Failure analysis of a broken SA564 stainless steel pump shaft	0
A time-dependent swelling constitutive model for reliability analysis of anhydrite tunnel	0
Experimental and finite element analyses for residual stress prediction of welded SAE-1018 steel joints	0
Determinants of innovation co-operation for manufacturing SMEs: evidence from a systematic review of the literature (1992-2015)	0
Image recognition method of surface defects of prefabricated concrete members in prefabricated building	0
Micro-magnetic characterisation of ground AISI D2 tool steel using hysteresis loop technique	0
Compressive behaviour and energy absorption capacity of a lattice structure generated by topology optimisation	0
An ultrasonic signal acquisition method of ferromagnetic materials based on similar matrix blind source separation	0
Analysis of factors affecting core functional competencies in manufacturing industries using fuzzy AHP	0
Research on characteristics and micro defects of ceramic dielectric energy storage	0
Statistical and experimental evaluation of multi-performance in turning of AISI D6 using Grey relational analysis	0
Effects of physical and chemical properties of ceramic hand moulds on natural rubber latex glove film formation	0
Analytical, numerical and experimental analysis of double collar collet chuck holder by combined extrusion and forging processes	0
Fatigue crack detection of heavy duty railway track based on decision fusion analysis	0
The different electroplastic effects of cutting directions during the turning process of Ti-6Al-4V titanium alloy	0
Numerical investigation of bipolar plates manufactured using hydroforming process	0
RF sputtered hexagonal boron nitride film-based printed circuit board for high voltage and high-power electronic applications	0
Properties of nano composite modified phenolic foam and its application in architectural design	0
Flexural behaviour of CFRP RC beams having a ductile cementitious composite layer in compression zone: an analytical study	0
Synthesis of Ni/Ti thin film by magnetron sputtering to study the effect of annealing time on microstructure and mechanical properties	0
Optimisation of FSP parameters in cast magnesium alloy using hybrid GRA methodology	0
Effects of SiC and carbon black on mechanical properties (tensile and flexural) of AA6082/SiC/CB metal matrix composites	0
Research on residual life prediction method of lithium ion battery for pure electric vehicle	0
An ultrasonic signal acquisition method of ferromagnetic materials based on similar matrix blind source separation	0
Atomistic simulation of bicrystal behaviour with Σ5 grain boundary parallel to nanometric cutting direction	0
Effect of annealing process on microstructure and mechanical property of medium-manganese TRIP steel	0
Optimisation of FSP parameters in cast magnesium alloy using hybrid GRA methodology	0
Synergy of wood-ash on mechanical and sliding wear properties of banana/walnut-based epoxy composites and optimisation with grey relational analysis	0
Dynamic displacement response analysis of bridge in the impact vibration of slight and frequent vehicle bump	0
Experimental study on adsorption properties of functional magnetic nanomaterials for heavy metal pollutants	0
Assessment of open hole flexural strength and progressive damage mechanism of CFRP composite as a function of stacking sequence	0
Pyroelectric and hygrothermal couplings effects on dynamic active control analysis of coupled thermopiezoelastic composite plate	0
Consolidation of Al-5083 alloy powders by ECAP	0
Monitoring performance analysis of composite chemical rubber materials under environmental pollution conditions based on nanomaterials chemical sensors	0
Improving CNTs properties using computational intelligence algorithms	0
Energy conservation and recycling transformation of clean energy heating based on artificial intelligence	0
Analysis of multi-layer solid lubricating film on improving the corrosion resistance of transmission gears	0