Composites Science and Technology

Article	Citations
Mechanics of composites with finite length crimped fibers dispersed in a soft matrix	198
Water-resistant, tough, and moldable corn stover-based structural materials through multiple dynamic cross-linking networks in-situ thermal rearrangement strategy	155
Editorial Board	155
Corrigendum to “Stretchable and translucent liquid-metal composite mesh for multifunctional electromagnetic shielding/sensing and Joule heating” [Compos. Sci. Technol. 249 (2024) 110512]	152
Corrigendum to “Sm2O3 micron plates/B4C/HDPE composites containing high specific surface area fillers for neutron and gamma-ray complex radiation shielding” [Compos. Sci. Tech. 251 (2024) 110567]	148
Effect of carbon nanotube surface treatment on the dynamic mechanical properties of a hybrid carbon/epoxy composite laminate	137
Modelling the tensile behaviour of aligned discontinuous carbon fibre thermoplastic matrix composites under processing conditions	132
Experimental and numerical study on failure mechanisms of tapered laminates: Effects of ply thickness and taper ratio	132
Large mechanical-to-electric output originated from optimized configuration in P(VDF-TrFE)-based nanocomposite fibrous membrane as wearable nanogenerator	125
Construction of micro-nano hybrid structure based on carbon nanotube whisker and alumina for thermally conductive yet electrically insulating silicone rubber composites	124
Compatibilizing and functionalizing polypropylene/polyethylene by in-situ exfoliating hexagonal boron nitride at interface	120
Triboelectric mechanism enhances piezoelectric performance of polyimide composite nanofibrous membrane	117
Cartilage-inspiration for constructing photothermal-driven, weather-resistant, self-healing and long-term anti-corrosion dual-layer coating	114
The strength prediction model of unidirectional fiber reinforced composites based on the renormalization group method	112
Dissolution dynamics of woven all-silk composites fabricated in the ionic liquid 1-ethyl-3-methylimidazolium acetate	110
Enhancing fracture toughness of polydimethylsiloxane with cyclosiloxane hybrid polymer microspheres	105
Microstructural evolution of highly aligned discontinuous fiber composites during longitudinal extension in forming	99
Editorial Board	99
Facile process for surface metalization: Rational design of Ag nanoparticle/polymer brush toward high-efficiency electroless plating	98
Cationic polyelectrolyte-assisted synthesis of silica nanochains for enhancing mechanical properties of sodium alginate composite films	95
Bending behaviour of thermoplastic composites in melt: A data-driven approach	94
Thermal management in radical induced cationic frontal polymerisation for optimised processing of fibre reinforced polymers	92
Continuous additive manufacturing of hemp yarn-reinforced biocomposites with improved impregnation method	91
Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites	90
Highly-toughened and dimensionally-stable TEMPO cellulose nanofiber/bio-PBSA nanocomposites fabricated via Pickering emulsion process	90

Linking microscopic network structure to macroscopic rheological properties in polydimethylsiloxane composite fluids	88
Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites	88
Biobased PA56/graphene oxide-modified carbon fiber mat composites capable of rapid thermoforming, excellent electric heating, thermoelectric and electromagnetic shielding performance	87
Direct embedment of RVE-based microscale into lab size coupons to research fracture process in unidirectional and bidirectional composites	87
Highly thermally conductive flexible copper clad laminates based on sea-island structured boron nitride/polyimide composites	87
Capacitive BaTiO3-PDMS hand-gesture sensor: Insights into sensing mechanisms and signal classification with machine learning	87
Flexible magnetoelectric coupling nanocomposite films with multilayer network structure for dual-band EMI shielding	86
Effect of crossing warp arrangements on delamination resistance of 3D woven composite T-joints under in-plane tensile loading	86
A unified approach to the effect of in-plane biaxial loading on delamination progression in laminated composite structures	83
A multifunctional composite material with piezoresistivity and mechanoluminescence properties for a wearable sensor	83
Preparation of superhydrophobic shape memory composites with uniform wettability and morphing performance	83
Polyimide/boron nitride composite aerogel fiber-based phase-changeable textile for intelligent personal thermoregulation	82
Failure mechanisms and acoustic emission pattern recognition of all-CFRP cylindrical honeycomb sandwich shell under three-point bending	82
Effect of CNT content and size on the high-temperature particle-erosion resistance of ablative materials for thermal protection systems	81
Fully 3D printed functional PDMS composites with designable structures and performances	81
Specific functionalized graphene oxide-based vitrimer epoxy nanocomposites for self-healing applications	81
Sulfonated hypercrosslinked polymer enhanced structural composite supercapacitors	80
Improved mechanical and antibacterial properties of polyvinyl alcohol composite films using quaternized cellulose nanocrystals as nanofillers	78
Protein-induced decoration of applying MXene directly to UHMWPE fibers and fabrics for improved adhesion properties and electronic textiles	77
Metal coordination in polymer drives efficient phonon transfer through self-assembled microstructures	77
Breadcrumb-inspired construction of liquid metal@BN core-shell microparticles for highly thermal conductive elastomeric composites with excellent flexibility and stability	77
Triple-network structured phase change composite based on “rod-brush” CNTs-CFs with high thermal conductivity	77
An energy-saving composite textile for thermal management	76
Fabrication and in-plane compressive collapse of CFRP honeycomb metamaterials	75
Theoretical prediction and validation of mechanical properties and damage of 3D orthogonal woven composites with different parameters	74
Aspect ratio-dependent volume resistivity in unidirectional composites: Insights from electrical conduction behavior	74
Efficient electromagnetic wave absorption of polypyrrole/low-reduction graphene oxide composites through dielectric properties modulation	73
Aqueous sizing agent prepared via ethyl acetate-induced polyamide acid conformation twist for CFRTPs enhancement	72
A self-powered piezoelectric Poly(vinyl alcohol)/Polyvinylidene fluoride fiber membrane with alternating multilayer porous structure for energy harvesting and wearable sensors	72
Micro contact modeling of electrical current conduction behavior between carbon fiber yarns	72
Directional thermal conductive PEG@BNNS composites enhanced tri-function passive radiative cooler for thermal management of high-power density devices	71
The dual-mode sensing of pressure and temperature based on multilayer structured flexible sensors for intelligent monitoring of human physiological information	69
Developing chemical interaction and achieving mechanical interlock to manufacture high-reliability Polypropylene/A6061-T6 aluminum alloy FAW joints	68
Molecular mechanics-based design of high-modulus epoxy to enhance composite compressive properties	68
Review of methods for enhancing interlaminar mechanical properties of fiber-reinforced thermoplastic composites: Interfacial modification, nano-filling and forming technology	68
Flexible bandwidth-enhanced metamaterial absorbers with epoxy/graphene nanoplatelets-silver nanowire polymer composites as substrates	68
Simulation of the role of agglomerations in the tunneling conductivity of polymer/carbon nanotube piezoresistive strain sensors	68
Effects of SiO2-coated CNTs on the directional formation of SiC whiskers and improvement in the ablative resistance of polymer-matrix composites	67
4D printed bio-inspired mesh composite materials with high stretchability and reconfigurability	66
Highly thermally conductive PEEK-based bi-selective radiative cooling composites with isolated structure for outdoor thermal management	66
Editorial Board	65
Study on metal alloy-reinforced polycaprolactone 3D printed composites for electromagnetic protection	65
Innovative wicking and interfacial evaluation of carbon fiber (CF)/Epoxy composites by CF tow capillary glass tube method (TCGTM) with Tripe-CF fragmentation test	64
One-step preparation of flexible nanocellulose-based composite hydrogel supercapacitors with high specific capacitance	63
Green surface modification strategy: Synergistic carboxymethyl cellulose -SiO2 hybrid layer boosts interfacial and ablative properties of aramid fiber/EPDM composites	63
Electrically conductive carbon fiber reinforced plastics induced by uneven distribution of polyaniline composite micron-sized particles in thermosetting matrix	63
A comprehensive framework for modeling volatile transport and bubble dynamics in liquid composite molding processes	62
A porous composite membrane for spontaneous moisture adsorption	62
Theoretical justification of Tsai's modulus based on micromechanical analysis	62
Topological design and experimental characterisation of continuous fibre-reinforced composite multiscale structures	62

Editorial Board	62
Editorial Board	62
Thermal and NIR controlled flexible switching devices using a smart conductive composite hydrogel approach	61
Impact of fullerene on the holographic properties of PQ/PMMA photopolymer	60
Self-healing interfaces in fiber reinforced polymers: Computational modeling	60
Defect imaging in carbon fiber composites by acoustic shearography	60
Carbon fiber surface-modified by polymer derived ceramic incorporated with graphene to strengthen the mechanical and electrochemical properties of ceramic-carbon fiber composite	60
Identification of RVE length scale in fiber composites via combined optical and SEM digital image correlation	59
Enhancing the mechanical properties of biodegradable PLLA/PBAT blends for 3D filament via one-pot synthesized CNCs-PVAc powder	59
Double modified amino phenolic resin particles: A novel modifier to thermally stable, mechanically-strong and tough epoxy	58
Bi2Se3 nanosheets-based photothermal composites with hydrophobic surface for synergistic anti-/de-icing	58
Three-dimensional cohesive finite element simulations coupled with machine learning to predict mechanical properties of polymer-bonded explosives	58
Theoretical-numerical integrated multi-scale model for fast prediction of progressive failure in textile composites	58
Super-tough, super-elastic, temperature-responsive, and tunable viscoelastic elastomer enabled by embedding nanosized liquid metal droplets	58
Excellent reversibility of resistive nanocomposite strain sensor composed of silver nanoflowers, polyurethane, and polyester rubber band	58
Ni@graphite carbon synergistic reinforcement sites penetrated hierarchical porous carbon boosting PCMs encapsulation and solar-thermal energy storage	57
Decreasing propagation rate of interfacial debonding between a single carbon fiber and epoxy matrix under cyclic loading	57
An experimental and numerical investigation into the low velocity impact response of GLARE subjected to bi-axial preloading	57
Aramid-based highly conductive composite films by incorporating graphene for electromagnetic interference shielding and Joule heating applications	56
Preparation and performance of self-cleaning photothermal-induced self-healing flexible sensors	55
Multiscale modeling of carbon nanotube-reinforced polymer with coarse-grain molecular dynamics informed morphology	55
Universal rate-dependence in electro-magneto-active polymeric composites	55
Hierarchically structured elastomer for absorption-dominated electromagnetic interference shielding in an ultra-wide band	55
Interface damage driven electrical degradation dynamics of glass fiber-reinforced epoxy composites	54
Superhydrophobic light-driven actuator based on self-densified wood film with a sandwich-like structure	54
Enhancing Polymer Composite Performance through Optimized Alignment with Machine Learning and In-Situ Monitoring in Electrically Assisted Vat Photopolymerization	54
Flow-induced fiber displacement in non-bindered UD-NCF during Wet Compression Molding – Analysis and implications for process control	54
Mechanics of reinforcement in a hybrid graphene and continuous glass fibre reinforced thermoplastic	54
Editorial Board	54
Fabricating polylactic acid-based blend composite with balanced stiffness−toughness and excellent shape memory performance by incorporating surface-modified carbon nanofibers	53
Monitoring of three-dimensional resin flow front using hybrid piezoelectric-fiber sensor network in a liquid composite molding process	53
Polymer composite cladding for selective frequency filtration: An experimental and modeling study	53
Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing	53
Effects of the inclusion shape, arrangement, and volume fraction on effective elastic moduli of two-dimensional two-phase composites	53
The hierarchical layer with dynamic imine bonds on carbon fiber surface to simultaneously improve interface and electromagnetic shielding properties of carbon fiber reinforced thermoplastic composites	52
Synergistically improving the edge-on impact damage resistance of composite laminates using multi-scale CNF/Z-pin toughening	52
Self-healing and in-situ real-time damage-reporting fiber-reinforced composite	52
A novel programmable composite metamaterial with tunable Poisson's ratio and bandgap based on multi-stable switching	52
A novel method to include crack-induced delamination in a fatigue damage predictive procedure for composite laminates	52
Laser induced graphene-based out-of-autoclave curing of fiberglass reinforced polymer matrix composites	52
Self-healing of polyamide 6/cyclic olefin copolymer/carbon fiber composites under quasi-static, impact, and fatigue conditions	51
Inspired by adipose tissue, mechanically robust and reprocessable LM-based composites for ultra-sensitive flexible pressure sensors	51
Enhanced cryopreservation performance of PVA grafted monolayer graphite oxide with synergistic antifreezing effect and rapid rewarming	51
Ultrathin solid polymer electrolyte enabling mechanically-strong energy storing fiber reinforced composites	51
Inhibited the dampness deterioration of GFRP insulation by depositing DBD/AFS co-fluorinated nano-SiO2 functional layer on the GF surface	51
Experimental and numerical investigation of the relationship between material defects and elastoplasticity behavior of 3D-printed carbon-fiber-reinforced thermoplastics under compressive loading	51
Dual functions of inverse vulcanized copolymers as both vulcanizator and interfacial modifier for improving the mechanical properties of silica reinforced rubber composites	51
Synergistic effect of compound rubber and SiO2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites	50
Correlating microstructure-property relationships in carbon fiber-expanded graphite hybrid composites for synergistic improvements in thermal and mechanical properties	50
Dynamic behavior of single curved fiber-metal hybrid lamina composite shells under blast loading-experimental observations	50
Assessing thermophysical properties of parameterized woven composite models using image-based simulations	50
Maximum utilization of nacre-mimetic composites by architecture manipulation and interface modification towards critical damage state	50
High modulus carbon fiber based composite structural supercapacitors towards reducing internal resistance and improving multifunctional performance	49
Skeleton designable SGP/EA resin composites with integrated thermal conductivity, electromagnetic interference shielding, and mechanical performances	49
Direct electrochemical grafting of crystalline PAEK macromolecule on carbon fiber to enhance the interfacial properties of PEEK/CF composites	49
Multilayer metasurface-based sandwich composites for wideband radar cross section reduction	49
A high-sensitivity thin-film MWNT@PDA-AgNP nanocomposite sensor for acquiring microscopic deformations	49
Highly biomimetic triboelectric-generating soft actuator with a hollow bilayer structure for sensing, temperature-sensitive switching and high-temperature alarm	49
A reliable progressive fatigue damage model for life prediction of composite laminates incorporating an adaptive cyclic jump algorithm	49
Effect of in-situ activated core-shell particles on fatigue behavior of carbon fiber reinforced thermoplastic composites	49
Influence of rapid high-temperature processing on the interface of CF/PEEK, a quick and effective method for enhancing the IFSS	49
Porous conductive composite as piezoresistive sensors for smart safety helmet	49
Interfacial debonding and cracking in a solid propellant composite under uniaxial tension: An in situ synchrotron X-ray tomography study	48
Investigation on compressive and impact performance of GO-modified hollow glass beads/epoxy resin composites in simulated deep-sea environment	48
Effects of lithium insertion induced swelling of a structural battery negative electrode	48
Synthesis of a tough montmorillonite/hydrogel composites for hot work of long-distance oil pipelines	48
A hyperelastic model considering the coupling of shear-compression for the forming simulation of 3D orthogonal composite preforms	48
Dual-functional phase change composite based on copper plated cellulose aerogel	48
Excellent energy storage properties achieved in PVDF-based composites by designing the lamellar-structured fillers	48
Electromechanically stable and flexible poro-hyperelastic composites for multimodal robotic tactile sensing	48
Tailoring flexible-segment-rich resin network structure by multi-step copolymerization for improved composite bipolar plate of proton exchange membrane fuel cell	48
Revealing the origin of the thermal conductivity improvement of the silane@polydopamine modified graphene/epoxy nanocomposites: A multiscale study	47
In-situ growth of CuS on polyimide film to construct dense and continuous network: Achieving excellent electrothermal and EMI shielding performance	47
Toward soft, stretchable and resilient high filled composite gels for potential application as thermal interface materials	47
Supramolecular cross-linking affords chitin nanofibril nanocomposites with high strength and water resistance	47
Construction of gradient conductivity cellulose nanofiber/MXene composites with efficient electromagnetic interference shielding and excellent mechanical properties	47
Ultrasensitive and wide-range reduced graphene oxide/natural rubber foam sensors for multifunctional self-powered wireless wearable applications	47
Oriented rGO framework induced hBN confined network in PDMS for absorption enhanced EMI shielding and through-plane thermal conductivity	46
Editorial Board	46
Exploring the macroscopic and microscopic characteristics of rice stalk for utilization in bio-composites	46

Ultrahigh sensitive flexible sensor based on textured piezoelectric composites for preventing sports injuries	46
Editorial Board	46
1 experimental and numerical evaluation of residual mechanical performance of carbon/epoxy laminated coupons after integration of solid battery cells for aeronautical applications	46
Editorial Board	46
A transparent PEDOT:PSS/PVA-co-PE/epoxy thermoelectric composite device with excellent flexibility and environmental stability	45
In-situ microfibrilization of liquid metal droplets in polymer matrix for enhancing electromagnetic interference shielding and thermal conductivity	45
Enhanced ultraviolet aging resistance of epoxy resins through surface enrichment achieved by fluorinated graphene oxide@CeO2	45
Advanced Meta-Modeling framework combining Machine Learning and Model Order Reduction towards real-time virtual testing of woven composite laminates in nonlinear regime	45
Deep learning approach for predicting multi-component stress fields in fiber-reinforced composites under different load paths	45
Adamantane imine as a seminal interfacial mediator toward rubber/carbon black composites with superior energy-saving capability and aging resistance	45
Effective electromagnetic interference shielding properties of micro-truss structured CNT/Epoxy composites fabricated based on visible light processing	45
The fibre kinking fracture toughness of laminated composites under combined compression and shear	45
MXene grafted porous carbon cloth with alumina for high thermal conductivity and EMI shielding effect	45
Silica nano-particle filled polymers: Debonding and microstructure	45
Biomimetic 3D printed spicule-like structure composite of organic material/rigid resin cylinders with highly enhanced strength and toughness	45
Current collector design strategies: The route to realising scale-up of structural power composites	44
The micromechanics of graphene oxide and molybdenum disulfide in thermoplastic nanocomposites and the impact to the polymer-filler interphase	44
Carbon fiber/epoxy composite laminates as through-thickness thermoelectric generators	44
A damage-related adaptive self-consistent clustering analysis method with localized refinement capability for the damage problem of 3D woven composites	44
Constructing segregated structure with multiscale stereocomplex crystallites toward synchronously enhancing the thermal conductivity and thermo-mechanical properties of the poly(l-lactic acid) composi	44
Influence of printing parameters and short carbon fibre reinforcement on fatigue behaviour, dimensional accuracy and macrogeometrical deviations of polylactic acid in material extrusion	44
Microstructure and dielectric properties of (Ba0.6Sr0.4)TiO3/PEEK functional composites prepared via cold-pressing sintering	44
Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy	44
Designing Fe-containing polyhedral oligomeric silsesquioxane to endow superior mechanical and flame-retardant performances of polyamide 1010	43
Structure-property relationship between lignin structures and properties of 3D-printed lignin composites	43
A hierarchical multi-scale analytical approach for predicting the elastic behavior of short fiber reinforced polymers under triaxial and flexural loading conditions	43
Evolution of strain-rate dependent compressive failure behavior of ceramifiable FRP composites at high temperature conditions	43
Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites	43
In-situ characterization on the fracture behavior of three dimensional polymer nanocomposites reinforced by CNT sponge	43
Characterization of fibre kinking behaviour in thin plate composites at different loading rates	43
Investigation on grinding temperature characteristics of CF/PEEK and material removal mechanism under temperature treatments	43
Mechanically strong, reprocessable and thermally stable PDMS/Hexagonal boron nitride composites with desirable thermal conductivities based on dynamic silyl ether linkages	43
Tensile properties of 3D-printed CNT-SGF reinforced PLA composites	43
Effect of the double bond content of sizing agents on the mechanical properties of carbon fibre reinforced vinyl ester composites	43
Self-healing of transverse crack damage in carbon fiber composites	43
Recyclable and highly thermally conductive nanocomposite with binary thermally conductive networks constructed from boron nitride nanoribbons and nanosheets	43
Layer-by-layer assembled aramid nanofiber/MXene aerogel: Exceptional resistance to extreme temperatures and robust anisotropy for advanced applications	43
Dual-direction thermal conductive FG-based composite manufactured by rotating magnetic-field assisted casting	42
A combination of “Inner - Outer skeleton” strategy to improve the mechanical properties and heat resistance of polyimide composite aerogels as composite sandwich structures for space vehicles	42
Ultrasonic welding of fiber reinforced vitrimer composites	42
High performance all-para-aramid paper prepared by impregnating heterocyclic aramid into poly(p-phenylene terephthalamide) microfiber/nanofiber-based paper	42
Flexible and transparent polylactic acid/hydrophobically modified nanobagasse cellulose/tannic acid/MXene films with highly efficient ultraviolet shielding	42
Dynamic mechanical behavior of three-dimensional six-directional braided composites at ultra-low temperatures	42
Enhanced electromagnetic wave absorption and thermal conductivity in epoxy composites with a heterostructure-rich 3D MoS₂/CMF network framework	42
Reactive graphene as highly efficient compatibilizer for cocontinuous poly(lactic acid)/poly(ε-caprolactone) blends toward robust biodegradable nanocomposites	42
Synergistic interfacial effects of sizing agent containing gradient curing agent and pre-heating treated carbon fibers	42
Flexible human-applicable infrared camouflage materials with temperature and emissivity tunability	42
Directional thermal transport feature in binary filler-based SiR composites with horizontally oriented h-BN	42
Construction of a cross-bedded tea polyphenol delivery structure in ultrahigh molecular weight polyethylene against bacteria for joint replacement	42
Enhancing impact resistance of hybrid structures designed with triply periodic minimal surfaces	42
Broadband strong absorption in lightweight metastructure via multiscale modulation	41
Deep learning-based analysis of damage mechanisms in 3D angle-interlock woven composites under variable impact conditions	41
A data-driven model based on the numerical solution of the equivalent inclusion problem for the analysis of nonlinear short-fibre composites	41
Experimental and modelling of dynamic response and damage of CFRP composites under lightning strike: coupled electrical-thermal-mechanical analysis	41
Editorial Board	41
Strengthening and toughening of polybenzoxazine by incorporation of polyrotaxane molecules	41
Thermal conductive nylon 6 composites with hybrid fillers prepared through reaction during extrusion	41
Cellulose nanocrystal enhanced, high dielectric 3D printing composite resin for energy applications	41
A novel green mechanical recycling strategy for carbon fiber-reinforced polymer laminates based on the glass transition principle	41
Facile fabrication of high nanofiller-content natural rubber nanocomposites for reversible plasticity shape memory polymers	41
Self-assembled nest-like BN skeletons enable polymer composites with high thermal management capacity	41
Magnetic flexible sensor with randomly distributed pine-branch microstructure for bidirectional recognition	41
A distortion-map-based method for morphology generation in multi-phase materials - application to wood	40
A novel strategy for designing high-performance self-healing polysiloxane-polyurea composites enhanced by dopamine-grafted cellulose nanofibers and Zn2+	40
Preparation of multifunctional silicone rubber composites with silver-coated phase change microcapsules for advanced thermal management	40
Continuous construction of gradient modulus interphase in CF/PA6 composites with enhanced interfacial properties and reduced porosity	40
A predictive model for the relationship between processing conditions and properties of thermoplastic vulcanizates (TPVs) via machine learning	40
Hygroscopic and hydrothermal aging behaviors and performance deterioration mechanisms of jute yarn wound composites	40
Multifunctional bionanocomposite hydrogels based on gelatin methacrylate and polyphenolic 2D nanoparticles Decorated with antimicrobial Bis(imidazolium)-based ionic liquids	40
Enhancement of high-temperature dielectric energy storage performances of polyimide nanocomposites utilizing surface functionalized MAX nanosheets	40
Fatigue characterization of cellulose nanofiber–reinforced silk yarns for enhanced structural applications	40
An anisotropic multi-phase field model for damage of fiber reinforced composites	40
Engineer a controllable hierarchical dynamic cross-linked network	40
Internal shear damage evolution of CFRP laminates ranging from −100 °C to 100 °C using in-situ X-ray computed tomography	40
Mussel-inspired structure based CsPbBr3/Aramid nanofiber composite film for lightweight, flexible and superior X-ray shielding	39
General influence of the environmental temperature on the matrix strength under tensile and compressive loading - A comprehensive study on high performance matrices	39
Nature-inspired energy dissipation sandwich composites reinforced with high-friction graphene	39
Dodging reality, striking the virtual: An undulating strategy for effectively enhancing CF/PEEK interfacial adhesion!	39
Thermally and magnetically tunable origami structures for electromagnetic wave absorption	39
Temperature-dependent evolution of synthetic coal-derived graphite fillers and their reinforcement in styrene butadiene rubber composites	39
Ultra-sensitive flexible pressure sensor with hierarchical structural laser-induced carbon nanosheets/carbon nanotubes composite film	39
Enhanced thermal conductivity and mechanical property via improvement of hydrogen bonding between hexagonal boron nitride and aramid copolymer	39
RVE Simulations of short fiber reinforced polyamide: Direct and inverse matrix parameter identification in view of the semi-crystalline polymer structure	39
On microscopic analysis of fracture in unidirectional composite material using phase field modelling	39
Synthesis of fractal crystallized organic microspheres together with constructing full covalent bonding at the interface to strengthen and toughen aramid fiber composites	39
Strain-rate-dependent mechanics and impact performance of epoxy-based nanocomposites	39
Highly durable hollow sandwich MXene/h-AgNWs/ANF composite films for exceptional electromagnetic interference shielding performance	39
A deep transfer learning approach to construct the allowable load space of notched composite laminates	38
Flexible and mechanically strong MXene/FeCo@C decorated carbon cloth: A multifunctional electromagnetic interference shielding material	38
Mechanical properties and failure analysis of 3D-printing micron-scale ceramic-based triply periodic minimal surface scaffolds under quasi-static-compression and low-speed impact loads	38
Flexible thermal interface materials with high dispersion of liquid metal in polyurethane induced by sodium alginate microcapsules	38
Experimental and numerical evaluation of the influence of voids on sound absorption behaviors of 3D printed continuous flax fiber reinforced PLA composites	38
Millimeter-scale macrocapsules with cold energy storage and temperature indication for vaccine storage	38
Interfacial enhancement mechanism of carbon fiber composites molded by electrothermal in-situ co-curing with CNT film	38
Environment-friendly recycling of CFRP composites via gentle solvent system at atmospheric pressure	38