Composites Science and Technology

Article	Citations
Compatibilizing and functionalizing polypropylene/polyethylene by in-situ exfoliating hexagonal boron nitride at interface	181
Corrigendum to “Sm2O3 micron plates/B4C/HDPE composites containing high specific surface area fillers for neutron and gamma-ray complex radiation shielding” [Compos. Sci. Tech. 251 (2024) 110567]	143
Corrigendum to “Stretchable and translucent liquid-metal composite mesh for multifunctional electromagnetic shielding/sensing and Joule heating” [Compos. Sci. Technol. 249 (2024) 110512]	142
Mechanics of composites with finite length crimped fibers dispersed in a soft matrix	138
Microstructural evolution of highly aligned discontinuous fiber composites during longitudinal extension in forming	132
Sulfonated hypercrosslinked polymer enhanced structural composite supercapacitors	125
Editorial Board	125
Multi-scale hybrid In situ tow scale carbon fiber reinforced thermoplastic strain sensor	124
Fully 3D printed functional PDMS composites with designable structures and performances	123
Rate-dependent mechanical and self-monitoring behaviors of 3D printed continuous carbon fiber composites	118
Experimental method for in-situ real-time measurement of mixed mode fibre/matrix interface debonding and comparison of fibre sizings in single short fibre composites	118
Linking microscopic network structure to macroscopic rheological properties in polydimethylsiloxane composite fluids	115
A unified approach to the effect of in-plane biaxial loading on delamination progression in laminated composite structures	109
Dissolution dynamics of woven all-silk composites fabricated in the ionic liquid 1-ethyl-3-methylimidazolium acetate	103
Triboelectric mechanism enhances piezoelectric performance of polyimide composite nanofibrous membrane	102
Modelling the tensile behaviour of aligned discontinuous carbon fibre thermoplastic matrix composites under processing conditions	101
Effect of carbon nanotube surface treatment on the dynamic mechanical properties of a hybrid carbon/epoxy composite laminate	96
Direct embedment of RVE-based microscale into lab size coupons to research fracture process in unidirectional and bidirectional composites	94
Facile process for surface metalization: Rational design of Ag nanoparticle/polymer brush toward high-efficiency electroless plating	93
Highly sensitive transparent piezoionic materials and their applicability as printable pressure sensors	91
Enhancing fracture toughness of polydimethylsiloxane with cyclosiloxane hybrid polymer microspheres	89
Experimental measurement and simulation of mechanical strength and biological behavior of porous bony scaffold coated with alginate-hydroxyapatite for femoral applications	89
Effect of crossing warp arrangements on delamination resistance of 3D woven composite T-joints under in-plane tensile loading	86
Design of flexible strain sensor with both ultralow detection limit and wide sensing range via the multiple sensing mechanisms	83
High thermal conductive composite with low dielectric constant and dielectric loss accomplished through flower-like Al2O3 coated BNNs for advanced circuit substrate applications	83

Highly-toughened and dimensionally-stable TEMPO cellulose nanofiber/bio-PBSA nanocomposites fabricated via Pickering emulsion process	83
Identification of elastic properties of interphase and interface in graphene-polymer nanocomposites by atomistic simulations	82
Breadcrumb-inspired construction of liquid metal@BN core-shell microparticles for highly thermal conductive elastomeric composites with excellent flexibility and stability	82
Morphology evolution to form double percolation polylactide/polycaprolactone/MWCNTs nanocomposites with ultralow percolation threshold and excellent EMI shielding	82
Construction of micro-nano hybrid structure based on carbon nanotube whisker and alumina for thermally conductive yet electrically insulating silicone rubber composites	81
Cationic polyelectrolyte-assisted synthesis of silica nanochains for enhancing mechanical properties of sodium alginate composite films	81
The strength prediction model of unidirectional fiber reinforced composites based on the renormalization group method	81
Protein-induced decoration of applying MXene directly to UHMWPE fibers and fabrics for improved adhesion properties and electronic textiles	80
Large mechanical-to-electric output originated from optimized configuration in P(VDF-TrFE)-based nanocomposite fibrous membrane as wearable nanogenerator	80
Flexible magnetoelectric coupling nanocomposite films with multilayer network structure for dual-band EMI shielding	79
Water-resistant, tough, and moldable corn stover-based structural materials through multiple dynamic cross-linking networks in-situ thermal rearrangement strategy	79
Biobased PA56/graphene oxide-modified carbon fiber mat composites capable of rapid thermoforming, excellent electric heating, thermoelectric and electromagnetic shielding performance	78
Effect of CNT content and size on the high-temperature particle-erosion resistance of ablative materials for thermal protection systems	78
Experimental and numerical study on failure mechanisms of tapered laminates: Effects of ply thickness and taper ratio	78
Capacitive BaTiO3-PDMS hand-gesture sensor: Insights into sensing mechanisms and signal classification with machine learning	77
Improved mechanical and antibacterial properties of polyvinyl alcohol composite films using quaternized cellulose nanocrystals as nanofillers	77
Failure mechanisms and acoustic emission pattern recognition of all-CFRP cylindrical honeycomb sandwich shell under three-point bending	76
Highly thermally conductive flexible copper clad laminates based on sea-island structured boron nitride/polyimide composites	75
Preparation of superhydrophobic shape memory composites with uniform wettability and morphing performance	75
Polyimide/boron nitride composite aerogel fiber-based phase-changeable textile for intelligent personal thermoregulation	75
Triple-network structured phase change composite based on “rod-brush” CNTs-CFs with high thermal conductivity	73
Cartilage-inspiration for constructing photothermal-driven, weather-resistant, self-healing and long-term anti-corrosion dual-layer coating	73
Specific functionalized graphene oxide-based vitrimer epoxy nanocomposites for self-healing applications	73
Metal coordination in polymer drives efficient phonon transfer through self-assembled microstructures	71
Continuous additive manufacturing of hemp yarn-reinforced biocomposites with improved impregnation method	71
Thermal management in radical induced cationic frontal polymerisation for optimised processing of fibre reinforced polymers	71
A multifunctional composite material with piezoresistivity and mechanoluminescence properties for a wearable sensor	70
Bending behaviour of thermoplastic composites in melt: A data-driven approach	70
Editorial Board	69
Innovative wicking and interfacial evaluation of carbon fiber (CF)/Epoxy composites by CF tow capillary glass tube method (TCGTM) with Tripe-CF fragmentation test	69
Universal rate-dependence in electro-magneto-active polymeric composites	69
Decreasing propagation rate of interfacial debonding between a single carbon fiber and epoxy matrix under cyclic loading	68
Highly thermally conductive PEEK-based bi-selective radiative cooling composites with isolated structure for outdoor thermal management	68
Hierarchically structured elastomer for absorption-dominated electromagnetic interference shielding in an ultra-wide band	68
Micro contact modeling of electrical current conduction behavior between carbon fiber yarns	68
Effects of SiO2-coated CNTs on the directional formation of SiC whiskers and improvement in the ablative resistance of polymer-matrix composites	67
Identification of RVE length scale in fiber composites via combined optical and SEM digital image correlation	66
Carbon fiber surface-modified by polymer derived ceramic incorporated with graphene to strengthen the mechanical and electrochemical properties of ceramic-carbon fiber composite	66
Electrically conductive carbon fiber reinforced plastics induced by uneven distribution of polyaniline composite micron-sized particles in thermosetting matrix	65
Flexible bandwidth-enhanced metamaterial absorbers with epoxy/graphene nanoplatelets-silver nanowire polymer composites as substrates	64
Aqueous sizing agent prepared via ethyl acetate-induced polyamide acid conformation twist for CFRTPs enhancement	64
Green surface modification strategy: Synergistic carboxymethyl cellulose -SiO2 hybrid layer boosts interfacial and ablative properties of aramid fiber/EPDM composites	64
Developing chemical interaction and achieving mechanical interlock to manufacture high-reliability Polypropylene/A6061-T6 aluminum alloy FAW joints	63
Self-healing interfaces in fiber reinforced polymers: Computational modeling	63
4D printed bio-inspired mesh composite materials with high stretchability and reconfigurability	62
Broadband dielectric response of silk Fibroin/BaTiO3 composites: Influence of nanoparticle size and concentration	62
Defect imaging in carbon fiber composites by acoustic shearography	62
Aramid-based highly conductive composite films by incorporating graphene for electromagnetic interference shielding and Joule heating applications	61
Influences of particle content, size and particle/matrix bonding strength on the gas transmission coefficient of carbon fiber reinforced epoxy	60
Evolution of anisotropic bubbles and transition of the mechanical and electrical properties during a non-continuous two-step foaming of epoxy/carbon nanofiber composites	60

Molecular mechanics-based design of high-modulus epoxy to enhance composite compressive properties	59
Double modified amino phenolic resin particles: A novel modifier to thermally stable, mechanically-strong and tough epoxy	59
Impact of fullerene on the holographic properties of PQ/PMMA photopolymer	59
Thermal and NIR controlled flexible switching devices using a smart conductive composite hydrogel approach	58
Effects of frequency and thermal conductivity on dielectric breakdown characteristics of epoxy/cellulose/BN composites fabricated by ice-templated method	58
Editorial Board	57
Editorial Board	57
The dual-mode sensing of pressure and temperature based on multilayer structured flexible sensors for intelligent monitoring of human physiological information	57
An energy-saving composite textile for thermal management	56
Editorial Board	56
A comprehensive framework for modeling volatile transport and bubble dynamics in liquid composite molding processes	56
Study on metal alloy-reinforced polycaprolactone 3D printed composites for electromagnetic protection	56
Aspect ratio-dependent volume resistivity in unidirectional composites: Insights from electrical conduction behavior	56
Three-dimensional cohesive finite element simulations coupled with machine learning to predict mechanical properties of polymer-bonded explosives	56
Enhancing the mechanical properties of biodegradable PLLA/PBAT blends for 3D filament via one-pot synthesized CNCs-PVAc powder	55
“Aerogel-like” polysiloxane-polyurethane hybrid foams with enhanced mechanical and thermal-insulating properties	54
A porous composite membrane for spontaneous moisture adsorption	54
One-step preparation of flexible nanocellulose-based composite hydrogel supercapacitors with high specific capacitance	54
Multiscale modeling of carbon nanotube-reinforced polymer with coarse-grain molecular dynamics informed morphology	54
Super-tough, super-elastic, temperature-responsive, and tunable viscoelastic elastomer enabled by embedding nanosized liquid metal droplets	53
Theoretical justification of Tsai's modulus based on micromechanical analysis	53
Directional thermal conductive PEG@BNNS composites enhanced tri-function passive radiative cooler for thermal management of high-power density devices	53
Interface damage driven electrical degradation dynamics of glass fiber-reinforced epoxy composites	53
Efficient electromagnetic wave absorption of polypyrrole/low-reduction graphene oxide composites through dielectric properties modulation	53
Preparation and performance of self-cleaning photothermal-induced self-healing flexible sensors	53
Bi2Se3 nanosheets-based photothermal composites with hydrophobic surface for synergistic anti-/de-icing	52
Simulation of the role of agglomerations in the tunneling conductivity of polymer/carbon nanotube piezoresistive strain sensors	52
Excellent reversibility of resistive nanocomposite strain sensor composed of silver nanoflowers, polyurethane, and polyester rubber band	52
Theoretical prediction and validation of mechanical properties and damage of 3D orthogonal woven composites with different parameters	52
Fabrication and in-plane compressive collapse of CFRP honeycomb metamaterials	51
Review of methods for enhancing interlaminar mechanical properties of fiber-reinforced thermoplastic composites: Interfacial modification, nano-filling and forming technology	51
Ni@graphite carbon synergistic reinforcement sites penetrated hierarchical porous carbon boosting PCMs encapsulation and solar-thermal energy storage	51
A self-powered piezoelectric Poly(vinyl alcohol)/Polyvinylidene fluoride fiber membrane with alternating multilayer porous structure for energy harvesting and wearable sensors	51
Multifunctional wax based conductive and piezoresistive nanocomposites for sensing applications	51
Mechanics of reinforcement in a hybrid graphene and continuous glass fibre reinforced thermoplastic	50
Enhanced cryopreservation performance of PVA grafted monolayer graphite oxide with synergistic antifreezing effect and rapid rewarming	50
In-situ growth of CuS on polyimide film to construct dense and continuous network: Achieving excellent electrothermal and EMI shielding performance	50
Flow-induced fiber displacement in non-bindered UD-NCF during Wet Compression Molding – Analysis and implications for process control	50
Ultrasensitive and wide-range reduced graphene oxide/natural rubber foam sensors for multifunctional self-powered wireless wearable applications	50
Synergistically improving the edge-on impact damage resistance of composite laminates using multi-scale CNF/Z-pin toughening	49
Multilayer metasurface-based sandwich composites for wideband radar cross section reduction	49
Porous conductive composite as piezoresistive sensors for smart safety helmet	49
Editorial Board	49
Effects of the inclusion shape, arrangement, and volume fraction on effective elastic moduli of two-dimensional two-phase composites	49
Maximum utilization of nacre-mimetic composites by architecture manipulation and interface modification towards critical damage state	48
Synthesis of a tough montmorillonite/hydrogel composites for hot work of long-distance oil pipelines	48
Polymer composite cladding for selective frequency filtration: An experimental and modeling study	48
Electromechanically stable and flexible poro-hyperelastic composites for multimodal robotic tactile sensing	48
Highly thermo-conductive yet electrically insulating material with perpendicularly engineered assembly of boron nitride nanosheets	48
Revealing the origin of the thermal conductivity improvement of the silane@polydopamine modified graphene/epoxy nanocomposites: A multiscale study	48
Toward soft, stretchable and resilient high filled composite gels for potential application as thermal interface materials	48
Tailoring flexible-segment-rich resin network structure by multi-step copolymerization for improved composite bipolar plate of proton exchange membrane fuel cell	48
Self-healing of polyamide 6/cyclic olefin copolymer/carbon fiber composites under quasi-static, impact, and fatigue conditions	48
Correlating microstructure-property relationships in carbon fiber-expanded graphite hybrid composites for synergistic improvements in thermal and mechanical properties	47
Ultrathin solid polymer electrolyte enabling mechanically-strong energy storing fiber reinforced composites	47
A novel programmable composite metamaterial with tunable Poisson's ratio and bandgap based on multi-stable switching	47
Enhanced dielectric properties of epoxy-based photoresist nanocomposites using carbon-coated nickel nanoparticles for high voltage integrated capacitors	47
Effect of in-situ activated core-shell particles on fatigue behavior of carbon fiber reinforced thermoplastic composites	47
Highly biomimetic triboelectric-generating soft actuator with a hollow bilayer structure for sensing, temperature-sensitive switching and high-temperature alarm	47
Assessing thermophysical properties of parameterized woven composite models using image-based simulations	47
Influence of rapid high-temperature processing on the interface of CF/PEEK, a quick and effective method for enhancing the IFSS	47
Monitoring of three-dimensional resin flow front using hybrid piezoelectric-fiber sensor network in a liquid composite molding process	47
Dynamic behavior of single curved fiber-metal hybrid lamina composite shells under blast loading-experimental observations	47
Self-healing and in-situ real-time damage-reporting fiber-reinforced composite	46
Synergistic effect of compound rubber and SiO2 nanoparticles on low-temperature toughening and balanced stiffness-toughness of random copolymer polypropylene nanocomposites	46
Preparation of durable superhydrophobic composite coatings with photothermal conversion precisely targeted configuration self-healability and great degradability	46
Supramolecular cross-linking affords chitin nanofibril nanocomposites with high strength and water resistance	46
Superhydrophobic light-driven actuator based on self-densified wood film with a sandwich-like structure	46
Experimental and numerical investigation of the relationship between material defects and elastoplasticity behavior of 3D-printed carbon-fiber-reinforced thermoplastics under compressive loading	46
Interfacial debonding and cracking in a solid propellant composite under uniaxial tension: An in situ synchrotron X-ray tomography study	46
The hierarchical layer with dynamic imine bonds on carbon fiber surface to simultaneously improve interface and electromagnetic shielding properties of carbon fiber reinforced thermoplastic composites	46
An adhesive and self-healable hydrogel with high stretchability and compressibility for human motion detection	46
Inhibited the dampness deterioration of GFRP insulation by depositing DBD/AFS co-fluorinated nano-SiO2 functional layer on the GF surface	46
A reliable progressive fatigue damage model for life prediction of composite laminates incorporating an adaptive cyclic jump algorithm	46
Dual-functional phase change composite based on copper plated cellulose aerogel	45
The addition of graphene nanoplatelets into epoxy/polycaprolactone composites for autonomous self-healing activation by Joule's heating effect	45
Laser induced graphene-based out-of-autoclave curing of fiberglass reinforced polymer matrix composites	45
A hyperelastic model considering the coupling of shear-compression for the forming simulation of 3D orthogonal composite preforms	45
Direct electrochemical grafting of crystalline PAEK macromolecule on carbon fiber to enhance the interfacial properties of PEEK/CF composites	45
Efficient electrical conductivity and electromagnetic interference shielding performance of double percolated polymer composite foams by phase coarsening in supercritical CO2	45

Inspired by adipose tissue, mechanically robust and reprocessable LM-based composites for ultra-sensitive flexible pressure sensors	45
Dual functions of inverse vulcanized copolymers as both vulcanizator and interfacial modifier for improving the mechanical properties of silica reinforced rubber composites	45
Effects of lithium insertion induced swelling of a structural battery negative electrode	45
Excellent energy storage properties achieved in PVDF-based composites by designing the lamellar-structured fillers	45
A combination of “Inner - Outer skeleton” strategy to improve the mechanical properties and heat resistance of polyimide composite aerogels as composite sandwich structures for space vehicles	44
Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing	44
Construction of gradient conductivity cellulose nanofiber/MXene composites with efficient electromagnetic interference shielding and excellent mechanical properties	44
A high-sensitivity thin-film MWNT@PDA-AgNP nanocomposite sensor for acquiring microscopic deformations	44
A novel method to include crack-induced delamination in a fatigue damage predictive procedure for composite laminates	44
Fabricating polylactic acid-based blend composite with balanced stiffness−toughness and excellent shape memory performance by incorporating surface-modified carbon nanofibers	44
Investigation on compressive and impact performance of GO-modified hollow glass beads/epoxy resin composites in simulated deep-sea environment	44
Skeleton designable SGP/EA resin composites with integrated thermal conductivity, electromagnetic interference shielding, and mechanical performances	44
High modulus carbon fiber based composite structural supercapacitors towards reducing internal resistance and improving multifunctional performance	44
Editorial Board	43
A damage-related adaptive self-consistent clustering analysis method with localized refinement capability for the damage problem of 3D woven composites	43
MXene grafted porous carbon cloth with alumina for high thermal conductivity and EMI shielding effect	43
Editorial Board	43
Self-assembled nest-like BN skeletons enable polymer composites with high thermal management capacity	43
Editorial Board	43
1 experimental and numerical evaluation of residual mechanical performance of carbon/epoxy laminated coupons after integration of solid battery cells for aeronautical applications	43
Recyclable and highly thermally conductive nanocomposite with binary thermally conductive networks constructed from boron nitride nanoribbons and nanosheets	43
Construction of a cross-bedded tea polyphenol delivery structure in ultrahigh molecular weight polyethylene against bacteria for joint replacement	42
Exploring the macroscopic and microscopic characteristics of rice stalk for utilization in bio-composites	42
Effective electromagnetic interference shielding properties of micro-truss structured CNT/Epoxy composites fabricated based on visible light processing	42
Evolution of strain-rate dependent compressive failure behavior of ceramifiable FRP composites at high temperature conditions	42
Current collector design strategies: The route to realising scale-up of structural power composites	42
Dual-direction thermal conductive FG-based composite manufactured by rotating magnetic-field assisted casting	42
A transparent PEDOT:PSS/PVA-co-PE/epoxy thermoelectric composite device with excellent flexibility and environmental stability	42
Biomimetic 3D printed spicule-like structure composite of organic material/rigid resin cylinders with highly enhanced strength and toughness	42
The fibre kinking fracture toughness of laminated composites under combined compression and shear	42
Modified PDMS with inserted hydrophilic particles for water harvesting	42
Structure-property relationship between lignin structures and properties of 3D-printed lignin composites	42
Mechanically strong, reprocessable and thermally stable PDMS/Hexagonal boron nitride composites with desirable thermal conductivities based on dynamic silyl ether linkages	42
Dynamic mechanical behavior of three-dimensional six-directional braided composites at ultra-low temperatures	42
Magnetic flexible sensor with randomly distributed pine-branch microstructure for bidirectional recognition	41
Directional thermal transport feature in binary filler-based SiR composites with horizontally oriented h-BN	41
In-situ microfibrilization of liquid metal droplets in polymer matrix for enhancing electromagnetic interference shielding and thermal conductivity	41
Reactive graphene as highly efficient compatibilizer for cocontinuous poly(lactic acid)/poly(ε-caprolactone) blends toward robust biodegradable nanocomposites	41
Microstructure and dielectric properties of (Ba0.6Sr0.4)TiO3/PEEK functional composites prepared via cold-pressing sintering	41
Constructing segregated structure with multiscale stereocomplex crystallites toward synchronously enhancing the thermal conductivity and thermo-mechanical properties of the poly(l-lactic acid) composi	41
Self-healing of transverse crack damage in carbon fiber composites	40
A hierarchical multi-scale analytical approach for predicting the elastic behavior of short fiber reinforced polymers under triaxial and flexural loading conditions	40
In-situ characterization on the fracture behavior of three dimensional polymer nanocomposites reinforced by CNT sponge	40
Cellulose nanocrystal enhanced, high dielectric 3D printing composite resin for energy applications	40
Ultrasonic welding of fiber reinforced vitrimer composites	40
Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites	40
Characterization of fibre kinking behaviour in thin plate composites at different loading rates	40
Experimental and modelling of dynamic response and damage of CFRP composites under lightning strike: coupled electrical-thermal-mechanical analysis	39
A data-driven model based on the numerical solution of the equivalent inclusion problem for the analysis of nonlinear short-fibre composites	39
Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy	39
The micromechanics of graphene oxide and molybdenum disulfide in thermoplastic nanocomposites and the impact to the polymer-filler interphase	39
Novel structural health monitoring method for CFRPs using electrical resistance based probabilistic sensing cloud	39
Silica nano-particle filled polymers: Debonding and microstructure	39
Tensile properties of 3D-printed CNT-SGF reinforced PLA composites	39
Ultrahigh sensitive flexible sensor based on textured piezoelectric composites for preventing sports injuries	39
Investigation on grinding temperature characteristics of CF/PEEK and material removal mechanism under temperature treatments	39
Advanced Meta-Modeling framework combining Machine Learning and Model Order Reduction towards real-time virtual testing of woven composite laminates in nonlinear regime	39
Synergistic interfacial effects of sizing agent containing gradient curing agent and pre-heating treated carbon fibers	39
Robust and sustainable PBAT – Hemp residue biocomposites: Reactive extrusion compatibilization and fabrication	39
Enhancing impact resistance of hybrid structures designed with triply periodic minimal surfaces	39
Flexible and transparent polylactic acid/hydrophobically modified nanobagasse cellulose/tannic acid/MXene films with highly efficient ultraviolet shielding	38
High performance all-para-aramid paper prepared by impregnating heterocyclic aramid into poly(p-phenylene terephthalamide) microfiber/nanofiber-based paper	38
Adamantane imine as a seminal interfacial mediator toward rubber/carbon black composites with superior energy-saving capability and aging resistance	38
Flexible human-applicable infrared camouflage materials with temperature and emissivity tunability	38
Influence of printing parameters and short carbon fibre reinforcement on fatigue behaviour, dimensional accuracy and macrogeometrical deviations of polylactic acid in material extrusion	38
Designing Fe-containing polyhedral oligomeric silsesquioxane to endow superior mechanical and flame-retardant performances of polyamide 1010	38
Enhanced ultraviolet aging resistance of epoxy resins through surface enrichment achieved by fluorinated graphene oxide@CeO2	38
Layer-by-layer assembled aramid nanofiber/MXene aerogel: Exceptional resistance to extreme temperatures and robust anisotropy for advanced applications	38
Advances in mechanics of hierarchical composite materials	38
Deep learning approach for predicting multi-component stress fields in fiber-reinforced composites under different load paths	38
Thermal conductive nylon 6 composites with hybrid fillers prepared through reaction during extrusion	38
Oriented rGO framework induced hBN confined network in PDMS for absorption enhanced EMI shielding and through-plane thermal conductivity	38
Editorial Board	37
Biomimetic design of gradient and hierarchical platform based on carbon nanotubes and porous carbon polyhedrons for strain sensors and beyond	37
Fatigue characterization of cellulose nanofiber–reinforced silk yarns for enhanced structural applications	37
A versatile and highly efficient algorithm to generate representative microstructures for heterogeneous materials	37
Strain-rate-dependent mechanics and impact performance of epoxy-based nanocomposites	37
Mussel-inspired structure based CsPbBr3/Aramid nanofiber composite film for lightweight, flexible and superior X-ray shielding	37
Effect of the double bond content of sizing agents on the mechanical properties of carbon fibre reinforced vinyl ester composites	37
Hygroscopic and hydrothermal aging behaviors and performance deterioration mechanisms of jute yarn wound composites	37
Effects of adhesive systems on the mechanical and fire-reaction properties of wood veneer laminates	37
Enhanced electromagnetic wave absorption and thermal conductivity in epoxy composites with a heterostructure-rich 3D MoS₂/CMF network framework	37
Millimeter-scale macrocapsules with cold energy storage and temperature indication for vaccine storage	37
Multifunctional bionanocomposite hydrogels based on gelatin methacrylate and polyphenolic 2D nanoparticles Decorated with antimicrobial Bis(imidazolium)-based ionic liquids	37
Adjusting silica/rubber interfacial interactions and properties via the click reactions between liquid polybutadiene and silane	37
Carbon fiber/epoxy composite laminates as through-thickness thermoelectric generators	37
A novel green mechanical recycling strategy for carbon fiber-reinforced polymer laminates based on the glass transition principle	37
Electromechanical characterization and kinetic energy harvesting of piezoelectric nanocomposites reinforced with glass fibers	37
A distortion-map-based method for morphology generation in multi-phase materials - application to wood	37
Highly durable hollow sandwich MXene/h-AgNWs/ANF composite films for exceptional electromagnetic interference shielding performance	37
Crosslinked poly (aryl ether ketone)/boron nitride nanocomposites containing a stable chemical bonding structure as high temperature dielectrics	37
Deep learning-based analysis of damage mechanisms in 3D angle-interlock woven composites under variable impact conditions	37
Broadband strong absorption in lightweight metastructure via multiscale modulation	37
Aligning diamond particles inside BN honeycomb for significantly improving thermal conductivity of epoxy composite	36
Environment-friendly recycling of CFRP composites via gentle solvent system at atmospheric pressure	36