Engineering Computations

Article	Citations
A multi-fidelity surrogate model based on extreme support vector regression: fusing different fidelity data for engineering design	36
A new path plan method based on hybrid algorithm of reinforcement learning and particle swarm optimization	20
Solution of third-order Emden–Fowler-type equations using wavelet methods	18
Guest editorial	17
A modified trigonometric cubic B-spline collocation technique for solving the time-fractional diffusion equation	16
Electromagnetic noise analysis and optimization for permanent magnet synchronous motor used on electric vehicles	14
A local radial basis function differential quadrature semi-discretisation technique for the simulation of time-dependent reaction-diffusion problems	14
Computational predictions for predicting the performance of steel 1 panel shear wall under explosive loads	14
An explainable prediction framework for engineering problems: case studies in reinforced concrete members modeling	13
Determination of the time-dependent convection coefficient in two-dimensional free boundary problems	13
Numerical investigation of time delay parabolic differential equation involving two small parameters	13
Motion control of the two joint planar robotic manipulators through accelerated Dai–Liao method for solving system of nonlinear equations	13
An adaptive Kriging method based on K-means clustering and sampling in n-ball for structural reliability analysis	12
A note on variation iteration method with an application on Lane–Emden equations	12
Multi-material topology optimization considering natural frequency constraint	11
The route problem of multimodal transportation with timetable: stochastic multi-objective optimization model and data-driven simheuristic approach	11
Study of isolation effectiveness of nuclear reactor building with three-dimensional seismic base isolation	11
An inverse problem of determining the time-dependent potential in a higher-order Boussinesq-Love equation from boundary data	11
An improved fatigue life prediction model for shock absorber cylinder with surface roughness correction	10
Identifying an unknown potential term in the fourth-order Boussinesq–Love equation from mass measurement	10
An introduction to the topological derivative	10
Physics-informed neural networks for consolidation of soils	9
Minimal mass of prismatic tensegrity structures	9
A new multi-fidelity surrogate modelling method for engineering design based on neural network and transfer learning	9
Parameter optimization for solid fluidization exploitation of natural gas hydrate in South China Sea	9

Research on path planning of autonomous vehicle based on RRT algorithm of Q-learning and obstacle distribution	9
Adaptive finite element–discrete element analysis for stratal movement and microseismic behaviours induced by multistage propagation of three-dimensional multiple hydraulic fractures	9
Effect of material heterogeneity on the deformation behaviour of multidirectional (1D/2D/3D) functionally graded composite panels	8
Existence and uniqueness of solutions for generalized Sturm–Liouville and Langevin equations via Caputo–Hadamard fractional-order operator	8
An enhanced spatial smoothing algorithm for coherent signals DOA estimation	8
Adaptive memory red deer algorithm for cross-dock truck scheduling with products time window	8
Topological sensitivity analysis revisited for time-harmonic wave scattering problems. Part I: the free space case	8
Transient thermo-elasto-hydrodynamic analysis of a bidirectional thrust bearing in start-up and shutdown processes	8
Estimating mechanical and dynamic properties of rubberized concrete using machine learning techniques: a comprehensive study	8
Numerical simulation of coupled liquid water, stress and heat for frozen soil in the thawing process	8
Fourth kind Chebyshev Wavelet Method for the solution of multi-term variable order fractional differential equations	8
Hermite polynomial normal transformation for structural reliability analysis	7
Numerical investigation of the flow characteristics and permeability of 2D irregular columnar jointed rock masses	7
Short-term cooling load prediction for office buildings based on feature selection scheme and stacking ensemble model	7
Artificial neural networks applied for solidified soils data prediction: a bibliometric and systematic review	7
Shape and topology optimal design problems in electromagnetic casting	7
Uniformly convergent computational method for singularly perturbed time delayed parabolic differential-difference equations	7
A statistical analysis of high-performance prosthetic isogrid composite tubes using response surface method	7
The numerical simulation of rock mass grouting: a literature review	7
Robust optimization of resource-constrained assembly line balancing problems with uncertain operation times	7
Estimation of structural response using convolutional neural network: application to the Suramadu bridge	7
Aerodynamic preliminary design optimization of a centrifugal compressor turbocharger based on one-dimensional mean-line model	7
A numerical modelling investigation of the development of a human cough jet	7
PSO-based group-oriented crow search algorithm (PGCSA)	7
A DFT-based finite element model to study the elastic, buckling and vibrational characteristics of monolayer bismuthene	7
Stiffness of three-bar tensegrity structure	7
Optimum design of composite structures with ply drop-offs using response surface methodology	6
Topological derivatives via one-sided derivative of parametrized minima and minimax	6
Imaging of small penetrable obstacles based on the topological derivative method	6
Y-Mat: an improved hybrid finite-discrete element code for addressing geotechnical and geological engineering problems	6
A topology optimization algorithm based on topological derivative and level-set function for designing phononic crystals	6
Revisiting non-convexity in topology optimization of compliance minimization problems	6
A variational method for calculating the longitudinal deformation of a shield tunnel in soft soil caused by grouting under tunnel	6
Adaptive output-feedback robust active disturbance rejection control for uncertain quadrotor with unknown disturbances	6
Topology and hydraulic permeability estimation of explosively created fractures through regular cylindrical pore network models	6
Adjoint-based methods to compute higher-order topological derivatives with an application to elasticity	6
Dynamic response of damaged rigid-frame bridges subjected to moving loads using analytical based formulations	6
Improved particle swarm optimization for mean-variance-Yager entropy-social responsibility portfolio with complex reality constraints	6
How opening windows and other measures decrease virus concentration in a moving car	6
Experimental and simulation investigation on BVID and CAI behaviors of CFRP laminates manufactured by RTM technology	6
Three-dimensional tooth profile design method of harmonic drive considering the deformation difference of the flexspline	6
The determination of the most suitable inertia weight strategy for particle swarm optimization via the minimax mixed-integer linear programming model	6
Numerical simulation of the influence of mixed sand on erosion characteristics of centrifugal pump	6
Slope stability analysis considering the rotated anisotropy in soil properties	6
A dynamic material distribution scheduling of automotive assembly line considering material-handling errors	5
Experimental validation of a topological derivative-based crack growth control method using digital image correlation	5
Topology optimization of structures subject to self-weight loading under stress constraints	5
Field models for the electromagnetic compatibility of wireless power transfer systems for electric vehicles	5
Topological sensitivity analysis with respect to a small idealized bolt	5
Fast and reliable knowledge-based design closure of antennas by means of iterative prediction-correction scheme	5

The GMRES solver for the interpolating meshless local Petrov–Galerkin method applied to heat conduction	5
The effect of ply drop-off on tensile strength of thermoplastic carbon fiber composite: a numerical and experimental study	5
M2R-Net: deep network for arbitrary oriented vehicle detection in MiniSAR images	5
Semi-analytical finite element method for simulating chemical dissolution-front instability problems in fluid-saturated porous media	5
Multi-objective optimization of cycle time and energy consumption in parallel robotic assembly lines using a discrete firefly algorithm	5
An hp-version adaptive finite element algorithm for eigensolutions of moderately thick circular cylindrical shells via error homogenisation and higher-order interpolation	5
Reliability analysis for dependent competing failure of harmonic drive with strength failure and stiffness degradation failure	5
Reconstruction of the parameter in parabolic partial differential equations using Haar wavelet method	5
An evolutionary computational method to formulate the response of unbonded concrete overlays to temperature loading	5
A coupled implicit material point-finite element method for modeling reinforced materials	4
Real-time identified chaotic plants using neural enhanced learning machine technique	4
A new fuzzy random multi-objective portfolio model with different entropy measures using fuzzy programming based on artificial bee colony algorithm	4
Nonlinear dynamic analysis of wrinkled membrane structure	4
Numerical solution for high-order ordinary differential equations using H-ELM algorithm	4
Improved numerical integration for locking treatment in the Peridynamic Timoshenko beam model	4
Solving binary programming problems using homotopy theory ideas	4
Inverse homogenization using the topological derivative	4
Improvement research on the stability of explicit integration algorithms with 3D viscoelastic artificial boundary elements	4
Numerical and experimental investigation of a spur gear pair with unloaded static transmission error	4
Modeling and dynamics simulation of spur gear system incorporating the effect of lubrication condition and input shaft crack	4
Bending of variable thickness rectangular thin plates resting on a double-parameter foundation: integral transform solution	4
A review on developing optimization techniques in civil engineering	4
Nonlinear dynamics of a spur gear pair with tooth root crack based on an amplitude modulation function	4
Use of empirical and diffusion models in the description of the process of water absorption by rice	4
Shape optimization in acoustic–structure interaction	4
Topological sensitivity analysis revisited for time-harmonic wave scattering problems. Part II: recursive computations by the boundary integral equation method	4
Incorporation of gradient-enhanced microplane damage model into isogeometric analysis	4
Construction of surrogate models for predicting the buckling strength of stiffened panels through DoE and RSM methods	4
Fast and accurate multi-material model for the prediction of laser welded structural response	4
Dual-rail–guided vehicle scheduling in an automated storage and retrieval system with loading and collision-avoidance constraints	4
Vieta–Lucas wavelets method for fractional linear and nonlinear delay differential equations	4
Earthquake response of linear-elastic arch-frames using exact curved beam formulations	4
A numerical method based on Haar wavelets for the Hadamard-type fractional differential equations	4
Flow behavior and aerodynamic noise characteristics of ultra-high-speed elevator based on large eddy simulation	4
Investigation of pull-in behavior of circular nanoplate actuator based on the modified couple stress theory	4
Research on automatic parking system based on linear quadratic regulator	4
An evolutionary structural optimization algorithm for the analysis of light automobile parts using a meshless technique	3
Thin Plates Spline Based Differential Quadrature for numerical solution of groundwater flow	3
Application of a collocation method based on linear barycentric interpolation for solving 2D and 3D Klein-Gordon-Schrödinger (KGS) equations numerically	3
On the justification of topological derivative for wave-based qualitative imaging of finite-sized defects in bounded media	3
Dual bilinear cohesive zone model-based fluid-driven propagation of multiscale tensile and shear fractures in tight reservoir	3
Road crack detection and quantification based on segmentation network using architecture of matrix	3
Time-dependent reliability and optimal design of scraper chains based on fretting wear process	3
Dynamic characteristics analysis for vehicle parts based on parallel optimization algorithm with CUDA	3
Slope reliability analysis using Bayesian optimized convolutional neural networks	3
Optimal fault diagnosis strategy for complex systems considering common cause failure under epistemic uncertainty	3
Optimum design of two-material bending plate compliant devices	3
Influences on unstable hydraulic fractures: propagation of adjacent multiple perforations and bedded interfaces in multilayered reservoir via FE-DE model	3
Dynamic asymptotic model of rolling bearings with a pitting fault based on fractional damping	3
Improving stability and adaptability of automotive electric steering systems based on a novel optimal integrated algorithm	3
Model predictive direct suspension force control of a bearingless induction motor based on sliding mode observer	3
System reliability analysis of foundation stability of gravity dams considering anisotropic seepage and multiple sliding surfaces	3
Load-bearing capacity and resonance stability of inelastic beams and plane trusses with initial defects	3
Free vibration analysis of fiber-metal laminated composite plates using differential, generalized and harmonic quadrature methods: experimental and numerical studies	3
A robust study on fractional order HIV/AIDS model by using numerical methods	3
Balancing assembly lines operating with heterogeneous workers under uncertainty in task processing times	3
Discrete element model calibration based on in situ measurements	3
Modelling, validation and parameter sensitivity of regenerative hydraulic-electric shock absorber	3
Radial basis Taylor series method and its applications	3
Simplification and further optimization of spatial cable-truss structure without inner ring cables	3
Numerical integration in G/XFEM analysis of 2-D fracture mechanics problems for physically nonlinear material and cohesive crack propagation	3
A practical discrete sizing optimization methodology for the design of high-rise concrete buildings	3
Numerical algorithm for two-dimensional nonlinear Volterra-Fredholm integral equations and fractional integro-differential equations (of Hammerstein and mixed types)	3
Improved method for analysing the dynamic response of gear transmission systems	3
Membrane mode enhanced cohesive zone element	3
3D large strain hierarchical multiscale analysis of soft fiber-reinforced tissues: application to a degraded arterial wall	3
Numerical investigation of the particle circulation characteristics in a tapered fluidized bed	3
A fast workpiece detection method based on multi-feature fused SSD	3
Manufacturing-oriented silicon steel coil lengthwise cutting stock problem with useable leftover	3
An improved energy prediction method to predict the fatigue life of laminated rubber-alloy spherical thrust elastomeric bearing under multiaxial loads	3
Comparative assessments of strain measures for nonlinear analysis of truss structures at large deformations	3
Numerical analysis for mining-induced stress and plastic evolution involving influencing factors: high in situ stress, excavation rate and multilayered heterogeneity	3
An implicit-explicit local method for parabolic partial differential equations	3
A methodology for loss and performance assessment of a variable geometry turbocharger turbine through a new meanline FORTRAN program	3
Three-dimensional slope stability and anti-slide pile treatment of Zhangjiayao landslide under rainfall	3
Computational analysis of convective heat transfer properties of turbulent slot jet impingement	3
Automatic sizing functions for unstructured mesh generation revisited	3
Brittle fracture on plates governed by topological derivatives	3
Numerical solution of large deflection beams by using the Laplace Adomian decomposition method	3
Analysis and numerical solution of dynamic Jiles–Atherton model applied to hysteresis modeling for giant magnetostrictive materials	3

A quasi-nonlocal coupling method for bond-based peridynamics with classical continuum mechanics	3
Fractional-order view analysis of Fisher’s and foam drainage equations within Aboodh transform	3
Attenuation and dispersion phenomena of shear waves in anelastic and elastic porous strips	3
Adaptive finite element analysis of free vibration of elastic membranes via element energy projection technique	2
A dynamic adaptive hybrid surrogate-assisted particle swarm optimization algorithm for complex system design optimization	2
Longitudinal and lateral stability control for autonomous vehicles in curved road scenarios with road undulation	2
Using genetic programming to model the bond strength of GFRP bars in concrete under the effects of design guidelines	2
The meso-failure mechanism of lightweight concrete simulated by the phase field method	2
Segmented research and parameter optimization of double-layer vibrating screen	2
Thermal buckling behavior of power and sigmoid functionally graded material sandwich plates using nonpolynomial shear deformation theories	2
Extension of the unsymmetric 8-node hexahedral solid element US-ATFH8 to geometrically nonlinear analysis	2
Simulation of particles screening in pulsating negative pressure shale shaker by coupling CFD and DEM	2
Unified solution of some problems of rectangular plates with four free edges based on symplectic superposition method	2
A new multiobjective tiki-taka algorithm for optimization of assembly line balancing	2
Numerical analysis of unstable propagation of three-dimensional parallel hydraulic fractures induced by interferences of adjacent perforation clusters and thermal diffusion	2
An application of data-driven modeling for hydroelasticity of an elastically supported semi-circular pipe conveying fluid	2
Stratal movement and microseismic events induced by multi-well hydrofracturing under varying well spacings and initiation sequences	2
The treatment of constraints due to standard boundary conditions in the context of the mixed Web-spline finite element method	2
In pursuit of a suitable machine learning algorithm for hardness prediction of aluminium alloy	2
Vibrations of complex composite double-column system by extended Laplace transform method	2
Event-triggered adaptive prescribed performance control of flexible-joint manipulators with output constraint	2
Extending Marlow’s general first-invariant constitutive model to compressible, isotropic hyperelastic materials	2
High-concentration time–frequency analysis for multi-component nonstationary signals based on combined multi-window Gabor transform	2
Fundamental parameters for a minimal mass design of prismatic tensegrity cylinder subjected to a compressive force	2
DRN-GAN: an integrated deep learning-based health degradation assessment model for naval propulsion system	2
Dynamic modelling of an armoured face conveyor considering the curved chains	2
An approach for computational blood flow under the joint effects of the electro-osmotic, magnetic field, chemical reaction and porosity	2
Bi-objective green in-house transportation scheduling and fleet size determination in mixed-model assembly lines with mobile robots	2
Multivariate nonlinear regression analysis of hydraulic fracturing parameters based on hybrid FEM–DEM	2
Numerical investigation of the effect of the injection angle on the spray structures of an air-blast atomizer	2
Determination of the space-dependent blood perfusion coefficient in the thermal-wave model of bio-heat transfer	2
Observer-based preview control for T-S fuzzy systems	2
Multifidelity modeling similarity conditions for airfoil dynamic stall prediction with manifold mapping	2
Repair limit policy of aircraft component based on extended uncertain random renewal reward process	2
Study of the SH-wave propagation in an MEFR layer bounded by heterogeneous viscoelastic layer and elastic half-space	2
A new efficient two-step iterative method for solving absolute value equations	2
An extended car-following model considering the effect of two-sided lateral gap with uncertain velocity on curved road	2
Legendre wavelets based approach for the solution of type-2 fuzzy uncertain smoking model of fractional order	2
On soliton solutions of the modified equal width equation	2
Design modification of iron ore bearing transfer chute using discrete element method	2
Rayleigh wave propagation at the boundary surface of dry sandy ($SiO_2$) thermoelastic solids	2
General prediction model of residual pretightening force of bolt group with one-step and multi-step pretightening and analysis of influencing factors from the perspective of elastic interaction	2
Artificial intelligence schemes to predict the mechanical performance of lignocellulosic fibers with unseen data to enhance the reliability of biocomposites	2
Maturity grading of jujube for industrial applications harnessing deep learning	2
Nonlocal plasticity-based damage modeling in quasi-brittle materials using an isogeometric approach	2
Investigation on dynamic mathematical model and control method of flue gas heat exchange system	2
Three-dimensional natural frequency investigation of bidirectional FG truncated thick hollow cone	2
Numerical simulation of mechanical characteristics and tension-torsion coupling effect of tension-type anchor cable	2
A weak form temporal quadrature element formulation for linear structural dynamics	2
Adaptive linear quadratic regulator for optimal structural control based on wavelet transform and genetic algorithm	2
Application of genetic programming in the identification of tool wear	2
Acceleration of structural topology optimization using symmetric element-by-element strategy for unstructured meshes on GPU	2
A fully coupled THMC model for simulating hydrate dissociation by using finite element method	2
Experimental validation of numerical simulations of free-surface flow within casting mould cavities	2
A wavelet method for solving Caputo–Hadamard fractional differential equation	2
Anti-vibration control design for TORA based barge-type offshore floating wind turbine using extended order high gain observer	2
Couple stress-based unsymmetric 8-node planar membrane elements with good tolerances to mesh distortion	2
Simultaneous identification of multi-parameter for power hardening elastoplastic problems in three-dimensional geometries	2
Stress-dependent unstable dynamic propagation of multiple hydraulic fractures: a review of stress shadow effects and continuum-discontinuum methods	2
Numerical simulation study on erosion collapse failure mechanism of cemented conglomerate accumulation	2
A new response surface method based on the adaptive bivariate cut-HDMR	2
A new scheme for extracting fault features of rolling element bearings	2
Designing an efficient smoothed point interpolation method for modeling slope deformation	2
A linear smoothed meshfree method with intrinsic enrichment functions for 2D crack analysis	2
Optimization of V-shaped regulating ball valve profile based on proxy optimization algorithm	1
On the topological enrichment for crack modeling via the generalized/extended FEM: a novel discussion considering smooth partitions of unity	1
An improved local error estimate in adaptive finite element analysis based on element energy projection technique	1
Car-following traffic model based on PID control: modelling and simulation	1
Synergetic energy-conscious scheduling optimization of part feeding systems via a novel chaotic reference-guided policy	1
Fatigue damage in bending of reinforced concrete frames using non-destructive tests for dynamic strength of the cylinder	1
A resource-efficient form-finding approach to tensegrity structures	1
Vibration analysis of two-dimensional micromorphic structures using quadrilateral and triangular elements	1
Computation of erosion in a hydro turbine	1
Bayesian experimental design for CO2 sequestration with leakage risk assessment	1
Assessment of shear band evolution using discrete element modelling	1
Adaptive mesh refinement for finite element analysis of the free vibration disturbance of cylindrical shells due to circumferential micro-crack damage	1
Improved gray correlation analysis and combined prediction model for aviation accidents	1
Application of Hagstrom-Warburton high-order truncation boundary condition on time harmonic analysis of concrete arch dam-reservoir systems	1
Solution of the 3D Helmholtz equation using barycentric Lagrange interpolation collocation method	1
Computational approach and convergence analysis for interval-based solution of the Benjamin–Bona–Mahony equation with imprecise parameters	1
Based-restraining interval extension improved truncation algorithm for response analysis of uncertain mechanical systems	1
Dynamic characteristics and structural stability analysis of a large annular tensegrity structure with radial ribs	1
Effect of impeller installation position on unsteady flow characteristics of a vortex pump	1
A novel multi-objective optimization method with local search scheme using shuffled complex evolution applied to mechanical engineering problems	1
The fast multipole method–accelerated line integration boundary element method for 3D heat conduction analysis with heat source	1
An optimal derivative-free King's family for multiple zeros and its dynamics	1
Reconstruction of granite microstructure model using simulated annealing method and Voronoi tessellation	1
A study of rotary cutting machine (RCM) performance on Korean granite	1
A CAE-oriented mesh hole-filling algorithm focusing on geometry and quality	1
Dynamical shakedown analysis of high-rise tower structure	1
Coalescence of thermal fractures initiated at parallel cooling surfaces	1
Determination of soil water hydraulic parameters from infiltration data	1
Unstable propagation of hydraulic fractures under varying well spacing and initiation sequence of multiple horizontal wells considering shear stress shadows	1
Macro autonomous traffic flow model with traffic jerk and downstream vehicle information	1
Stability analysis of Xiluodu Hydropower Station right bank slope based on discontinuous deformation analysis method	1