Materials & Design

Article	Citations
Injectable hyaluronic acid hydrogel for corneal neovascularization management by inhibiting oxidative stress, inflammation and neovascularization	1591
Creation of submicron-scale metal oxide speckle patterns on single carbon fibers by a thermodynamically and kinetically controlled nonequilibrium process	727
Corrigendum to “A solid–liquid interface enhancement algorithm for X-ray in situ observation of space materials” [Mater. Design 228 (2023) 11852]	520
3D multi-site hydrogen evolution reaction catalysts on nanoimprinted surfaces, structured via multi-photon lithography derived masks	438
Study on interfacial healing mechanism of a Ni-Co base dual-phase superalloy during hot-compression bonding	427
Introducing a new heterogeneous nanocomposite thin film with superior mechanical properties and thermal stability	390
Foundation model for composite microstructures: Reconstruction, stiffness, and nonlinear behavior prediction	253
Corrigendum to “Temperature-dependent properties of single crystal diamond nanopillars”. [Mater. Des. 255 (2025) 114194]	230
Femtosecond two-pulse laser approach for spall failure in thin foils	204
Homogenization of the melt pool influenced by the local transient thermal conditions using model-based parameter adaption in powder bed fusion	200
Study on casting infiltration properties of ZTA/Fe wear resistant composites assisted by self-exothermic powders of Al-Ni2O3	193
Surface modification of ultra-high molecular weight polyethylene fibers by an eco-friendly impregnation solution to enhance interfacial adhesion with rubber	182
Regulation of microstructure and physical properties of Tb-Dy-Fe-Cu alloys by doping with transition elements	167
Light-adaptable artificial iris with dynamically scalable pupil-aperture function by radially patterned photochromic transition control	161
Multifunctional upconversion nanocomposite for multi-purpose cancer theranostics	159
New kink-band formation mechanism discovered in Zn-Al alloy with mille-feuille microstructure	159
Sandwich-structured graphene composite sponge with multiple cyclic compression for waste liquid treatment under dynamic electrical stimulation response	154
Pore space of steatite ceramics triggered by the allowance of natural fibers: High-resolution X-ray microscopy analysis and related thermo-mechanical properties	151
Remote eradication of delayed infection on orthopedic implants via magnesium-based total morphosynthesis of biomimetic mineralization strategy	151
Dimensionless unified modelling of macroscale electric properties of conductive fibre networks in different regimes	145
Compressive stress improves mechanical properties of mineralized collagen by dynamically regulating its mineralization - a closed-loop regulation mechanism	142
Oriented co-continuous 3D porous scaffolds with inhibited activating functionality: An effective strategy to inhibit the hyperactivation of astrocytes	140
Deep-learning approach for predicting crystalline phase distribution of femtosecond laser-processed silicon	139
A quantification study of hydrogen-induced cohesion reduction at the atomic scale	139
Powder injection molded ceramic scaffolds: The role of pores size and surface functionalization on the cytocompatibility	135

Achieving ultra-high strength rapidly in Ti-3Al-8V-6Cr-4Mo-4Zr alloy processed by directed energy deposition	135
Multiplexed detection of SARS-CoV-2 based on upconversion luminescence nanoprobe/MXene biosensing platform for COVID-19 point-of-care diagnostics	130
Heat-resistant aluminum alloy design using explainable machine learning	128
Towards an instant structure-property prediction quality control tool for additive manufactured steel using a crystal plasticity trained deep learning surrogate	128
Study on the melting and sintering behavior of Cu-Fe mixed nanoparticles based on molecular dynamics simulations	125
Quantitative mixed-valence state identification of metal ions based on fluorescence response of graphene quantum dots	125
Design, fabrication, and characterization of novel dental implants with porosity gradient obtained by Selective Laser Melting	125
Engineering melt pool boundaries for strength ductility Enhancement in additive manufactured CoCrFeNiWx high entropy alloys	124
Precision control of oxygen content in CP-Ti for ultra-high strength through titanium oxide decomposition: An in-situ study	123
Innovative crosslinking and foaming Strategies for Advancing biodegradable composite foams: Enhancing Foamability, Flexibility, and thermal insulation	121
Construction of antibacterial photothermal PCL/AgNPs/BP nanofibers for infected wound healing	120
Superior fracture toughness with high yield strength in a high-Mn steel induced by heterogeneous grain structure	120
Mechanical properties and microstructure of wire laser metal deposited austenitic stainless steel	118
Ultralight Pt-ALD-modified graphene aerogel achieving aluminum-class thermal resistance at 12% mass	118
Evolutionary characteristics of microstructural hydration and chloride diffusion in UHPC	118
A PTHrP-2 loaded adhesive cellulose acetate nanofiber mat as wound dressing accelerates wound healing	114
Roughness-driven compressive sensing AFM for accurate nanoscale surface characterization in functional material systems	113
Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing	112
Mechanical softening of CuX alloys at elevated temperatures studied via high temperature scanning indentation	112
Data-driven distortion compensation for laser powder bed fusion process using Gaussian process regression and inherent strain method	110
Metallic nanoparticles-based additive manufacturing: A review of recent advances on progress, prospects, and challenges	109
4D printing of shape memory inferior vena cava filters based on copolymer of poly(glycerol sebacate) acrylate-co-hydroxyethyl methacrylate (PGSA-HEMA)	108
Cell penetrating peptide modified M2 macrophage derived exosomes treat spinal cord injury and rheumatoid arthritis by loading curcumin	106
Effect of SiC on the antioxidant properties of Al-containing composites Ti3SiC2/SiC and its oxidation mechanism analysis	106
Enhanced drug release from a pH-responsive nanocarrier can augment colon cancer treatment by blocking PD-L1 checkpoint and consuming tumor glucose	105
Synergistic effects of Monel 400 filler wire in gas metal arc welding of CoCrFeMnNi high entropy alloy	104
Comparison of hydrogen resilience of three different corrosion-resistant martensitic steels	103
Advances, optical and electronic applications of functional materials based on rare earth sulfide semiconductors	103
Accelerating autonomic healing of cementitious composites by using nano calcium carbonate coated polypropylene fibers	103
Carrier-free poly(glycyrrhetinic acid)-facilitated celastrol-loaded nanoparticle for high-efficiency low-toxicity treatment of rheumatoid arthritis	102
On the process of designing material qualification type specimens manufactured using laser powder bed fusion	102
Sequential galvanic replacement mediated platelet Ru nanozyme for enhanced peroxidase-mimicking efficiency in neutral media to combat gastrointestinal bacterial infection	101
Enhanced solid solution hardening by off-center substitutional solute atoms in α-Ti	101
Dual-radical generating FePEIDN nanocomposite for tumor therapy: Sulfite radical persistence meets Fenton catalysis	100
Delay optimisation of Gradient-Doped Nd: YAG laser ceramics via active mixing of Direct ink writing	99
Mechanisms of external magnetic field influence on electrical discharge machining of SiCp/Al composites	98
The design optimization of nanostructured hierarchical electrodes for solid oxide cells by artificial impregnation	97
Analyzing time series of serrated flow and the dependence on structural heterogeneity in Al-Mg-Sc alloy	96
Machine learning and Python assisted design and verification of Fe–based amorphous/nanocrystalline alloy	95
Laser intensity profile as a means to steer microstructure of deposited tracks in Directed Energy Deposition	94
Modeling the mechanical properties of polypropylene/lignin/flax hybrid composites	93
Location of cobalt impurities in the surface oxide of stainless steel 316L and metal release in synthetic biological fluids	93
Green and facile fabrication of high-performance antibacterial nanofiber materials with low cytotoxicity using eggshell membrane hydrolysate	93
Improving thermal/electrical properties of silicone rubber nanocomposite using exfoliated boron nitride nano sheets made by an effective/novel exfoliating agent	93
“Fire-beetles” inspired all-solid infrared sensor with bolometric and photomechanic dual sensing modes	91
Strategy of complex carbides in microalloyed 4Mn steels processed by quenching and austenite reversion	91
Microstructure dependent burst behavior of oxide dispersion–strengthened FeCrAl cladding	91
Micro-cantilever bending tests for understanding size effect in gradient elasticity	90
CuFeS2 nanozyme regulating ROS/GSH redox induces ferroptosis-like death in bacteria for robust anti-infection therapy	89
Recent advances in the structure and biomedical applications of nanodiamonds and their future perspectives	88

Rapid surface preparation for three-dimensional characterization of defect and microstructure of metal additive manufacturing using electrochemical jet	88
Gelatine methacrylamide-based multifunctional bilayer hydrogels for accelerating diabetic wound repair	87
Effect of dual phase structure induced by chemical segregation on hot tearing reduction in additive manufacturing	86
Processability improvement of laser-assisted micro-machining 95W-3.5Ni-1.5Fe alloy based on surface and subsurface characteristics	86
Densifying hydration products of alite by a bio-inspired admixture	86
Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing	83
Patterned preparation of high-quality graphene film based on solution coating	83
Research on the microstructure and properties of Cu-Ni-Si-Ti alloys with micro-nano hybrid systems	82
Overcoming the challenges of fusion-based brass additive manufacturing through solid-state additive friction-stir deposition	82
Corrigendum to “Mechanical and tribological behaviour of BaTiO3 nanoparticles reinforced UHMWPE nanocomposite for prospective load-bearing applications”. [Mater. Des. 256 (2025) 114349]	82
Porous titanium layer co-immobilized with bone morphogenetic protein-2 and vancomycin for biofunctionalization of ultra high molecular weight polyethylene	81
Joining of additively manufactured fiber-reinforced thermoplastic and metals by ultrasonic energy: Mechanical and corrosion behavior	81
Suspended few-layer GaS photodetector with sensitive fast response	81
Coupled effect of microstructure and topology on the mechanical behavior of Inconel718 additively manufactured lattices	81
First-principles comparative analysis of structural stability, hydrogen storage, mechanical, and electronic properties of hexahydride perovskites A2(Pd/Pt)H6 (A = alkali metal)	79
Fabrication and strengthening mechanism of dual-phased and bimodal-sized (Si3N4p + TiB2p)/6061Al hybrid composite	79
A transient carbon nanocoating for improved processing efficiency of copper during laser powder bed fusion	79
Enantioselective theranostics of brain glioma using chiral quantum structures	79
Probing the atomic-scale origins of anti-friction and wear-resisting in graphene-coated high-entropy alloys	78
Crystalline or amorphous? A critical evaluation of phenomenological phase selection rules	78
Fabrication of self-supporting structures made of washcoat materials (γ-	78
Design methodology of the Ni50Ti50 shape memory alloy beam actuator: Heat treatment, training and numerical simulation	77
Crashworthiness analysis of gradient hierarchical multicellular columns evolved from the spatial folding	77
Tailoring the strength of inconel 718: Insights into LPBF parameters and heat treatment synergy	77
Preparation and application of aramid nanofiber via carbodiimide assisted polymerization	77
Grain boundary and particle interaction: Enveloping and pass-through mechanisms studied by 3D phase field crystal simulations	77
On the design of a piezoelectric self-sensing smart composite laminate	76
Thermal conductivity of low-density micro-and nanocellular poly(methyl-methacrylate) (PMMA): Experimental and modeling	76
3D printed hydroxyapatite – Zn2+ functionalized starch composite bone grafts for orthopedic and dental applications	76
Excellent mechanical properties of a novel double-diagonal reinforced mechanical metamaterial with tunable Poisson’s ratios inspired by deep-sea glass sponges	76
Bilayer-functionalized mesoporous silica nanoparticles for overcoming multiple barriers of mucus clearance, intestinal epithelium and P-glycoprotein efflux	75
Magnetostrictive bulk Fe-Ga alloys prepared by selective laser melting for biodegradable implant applications	75
Mechanical and tribological behaviour of BaTiO3 nanoparticles reinforced UHMWPE nanocomposite for prospective load-bearing applications	75
Multi phenomena melt pool sensor data fusion for enhanced process monitoring of laser powder bed fusion additive manufacturing	74
Learning the non-proportional multiaxial elastic–plastic response of an aluminium alloy with neural networks	74
Improved thermal shock reliability of Ag paste sintered joint by adjusted coefficient of thermal expansion with Ag-Si atomized particles addition	74
Electromagnetic stealth technology: A review of wave-absorbing structures	73
Thermoelectric performance of oriented SrTiO3 nanofilms containing Σ3{111} grain boundary interfaces	73
Data-driven design of topologically optimized auxetic metamaterials for tailored stress–strain and Poisson’s ratio-strain behaviors	72
Multifunctional mechanical metamaterials with tunable double-negative isotropic properties	72
Deformation-informed design of dual-cure adhesives for camera modules via microscale digital image correlation	72
The effect of pre-existing voids on solder reliability at different thermomechanical stress Levels: Experimental assessment	71
Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis	70
Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing	69
High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects	69
Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response	69
Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V	69
Strategies to enhance photocatalytic activity of graphite carbon nitride-based photocatalysts	69
Explainable machine learning for predicting the mechanical properties in bainitic steels	68
Hybrid flexible dressings with rapid gelation promote healing of difficult-to-treat infected wounds	68
Biomimetic VEGF-loaded bilayer scaffold fabricated by 3D printing and electrospinning techniques for skin regeneration	68
Au-Pt heterostructure cocatalysts on g-C3N4 for enhanced H2 evolution from photocatalytic glucose reforming	68
A novel natural polysaccharide dissolving microneedle capable of adsorbing pus to load EGCG for the treatment of acne vulgaris	68
Fabrication of 1000-Line/mm orthogonal grating for Micro-Deformation field mapping	67
Investigation of tensile deformation behavior of a TWIP/TRIP metastable β titanium alloy at typical temperature part Ⅰ: Room temperature	67
Editorial Board	67
In-situ monitoring of multi-physical dynamics in ceramic additive manufacturing	67
Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism	67
Control of residual stress in inter-layer hammering hybrid arc-based directed energy deposition manufacturing of cross-structure based on finite element method	67
Corrosion behavior of Si-18at%Y alloy in air/water-oxygen environment	67
NiTiNb shape memory alloys fabricated via the reactive sintering of elemental powders: Microstructures, transformation behaviors and compressive properties	67
Cover_242	66
Interface-driven anomalies in irradiation damage: Multiscale simulation of asymmetric diffusion and mechanical degradation in SnPb solder joints under electron irradiation	66
Microstructure of NiAl-Ta-Cr in situ alloyed by induction-assisted laser-based directed energy deposition	66
Herbal hydrogel incorporating Scutellaria baicalensis Georgi carbon dots and baicalein for antibacterial, anti-inflammatory, and wound healing applications	66
Effect of annealing on the elastic properties of copper thin films via laser ultrasonics	65
Graph neural networks for mechanical property prediction of 2D fiber composites	65
Compressive strength of twinned Ni-Co nanoparticles: In-situ experiments and atomistic simulations	65
Extreme high accuracy prediction and design of Fe-C-Cr-Mn-Si steel using machine learning	64
A new insight on the corrosion behavior and mechanism of martensitic steel	64
Interfacial adhesion between dissimilar thermoplastics fabricated via material extrusion-based multi-material additive manufacturing	63
Active interlocking metasurfaces enabled by shape memory alloys	63
Effect of intentional chemical doping on crystallographic and electric properties of the pyrochlore Bi2Sn2O7	63
Microstrain-range giant piezoresistivity of silicon oxycarbide thin films under mechanical cyclic loads	63
Temperature- and stress-dependent creep behavior of SAC305 solder alloy through tensile characterization and CPFE simulation	63
Fucoidan-loaded, neutrophil membrane-coated nanoparticles facilitate MRSA-accompanied wound healing	63
Optimization of composite extrusion modeling process parameters for 3D printing of low-alloy steel AISI 8740 using metal injection moulding feedstock	62
Microstructural characteristics with process-microstructure-property relations during high-frequency ultrasonic vibration-assisted cutting of metallic material	62
Effect of twin-wire feeding methods on the in-situ synthesis of electron beam fabricated Ti-Al-Nb intermetallics	62
Designing Nd-doped bismuth selenide nanosheets with boosted photothermal conversion for imaging guided cancer therapy	62

Enhanced thermal conductive and moisturizing hydrogels by constructing 3D networks of BN-OH and CNT-OH in alignment for burn therapy	62
A novel flexible, conductive, and three-dimensional reduced graphene oxide/polyurethane scaffold for cell attachment and bone regeneration	62
Fabrication of breathable superhydrophobic composite fabric with moisture permeability and weak-electric-field bactericidal ability designed for protective clothing applications	61
Surface effects of molten slag spills on calcium aluminate cement paste	61
Quantification of micro-damage evolution process in ceramics through extensive analysis of multi-source heterogeneous data	61
Molding quality control with nonlinear forming method in 3D cement printing	61
Twinned dendrites growth in wire arc directed energy deposition of Al-Zn-Mg-Cu alloy	61
A dual-functional nanomedicine combining fluorinated antisense oligonucleotide with chemotherapeutic drug for synergistic gene-chemo tumor treatment	60
Long term curl of printing paper due to ink solvent migration	60
Stress corrosion and interaction behaviour of adjacent cracks in rock-like material under hydro-mechanical Coupling: An experimental and numerical study	60
Device level assessment of Ni and Ni45Cu55 as electrodes in Mg2(Si,Sn)-based thermoelectric generators	60
ALDS: An active learning method for multi-source materials data screening and materials design	60
Preface – Joint special issue on nanomechanical testing in materials research and development VIII	60
Structural characterisation of Cu-Zr thin film combinatorial libraries with synchrotron radiation at the limit of crystallinity	59
Static assessment of flawed thin AlSi10Mg parts produced by Laser Powder Bed Fusion	59
Microwave driven synthesis of narrow bandgap alpha-tin nanoparticles on silicon	59
Effect of rare earth element on amorphization and deformation behavior of crystalline/amorphous dual-phase Mg alloys	59
Cover_220	59
Fabrication of microgroove poly(lactic-co-glycolic acid) nerve guide conduit using dry-jet wet spinning for rat laryngeal recurrent nerve regeneration	59
A “biomimetic bone-magnet” with suitable mechanical properties concurrently performs accurate target collection of nanoparticles for magnetothermally driven osteosarcoma thermo-chemotherapy	58
Biomimetic aminoated mesoporous silica xerogel exhibiting chiral surface topology for delivery insoluble drug with multiple-controlled manners and improved oral adsorption	58
Design and fabrication of cascade novel Fenton catalytic nanocomposite as theranostic agent for chemodynamic/photothermal synergistic tumor therapy	58
Rapamycin incorporating hydrogel improves the progression of osteoarthritis by inducing synovial macrophages polarization and reducing intra-articular inflammation	58
Synergistic water-driven shape memory performance and improving mechanism of grading photo-thermal curing shape memory composite	58
3D printed lightweight metastructure with microwave absorption and mechanical resistance	58
Mitochondria-targeted and pH-triggered charge-convertible polymeric micelles for anticancer therapy	58
Novel Ni–Co-based superalloys with high thermal stability and specific yield stress discovered by directed energy deposition	57
Cover_244	57
Improving photodetection performance of ReS2@Ti3C2 composite by efficient charge transportation	57
Simultaneously improved strength and ductility of low-cost Ti-Al-V-Fe alloy with TiB2 addition and thermomechanical processing	57
Effects of adding zeolite particles on the hierarchical microstructure of zeolite-geopolymer composites and their Sr2+ adsorption properties	57
Investigation on microstructure heterogeneity of the HPDC AlSiMgMnCu alloy through 3D electron microscopy	57
Triple Pseudo-Siamese network with hybrid attention mechanism for welding defect detection	57
Unveiling the enhancing mechanism of cyclic stability in Tb doped Ni-Mn-Sn Heusler alloys	57
Microstructural evolution and enhanced spin-orbit torque in Pt-Zr alloyed magnetic heterostructures	56
Injectable proangiogenic hydrogel promotes burn wound healing	56
Machine learning method to investigate the influence of alloy elements on non-metal interstitials in HCP metals	56
Influence of intermetallics and element concentrations on the performance of the heat treated HVDC AlSiMgMnCu alloys at nano-scale	56
Unraveling the influence of oxygen vacancies on sintering behavior and microstructure evolution in perovskite BaTiO3 ceramics	56
Quantifying chemical fluctuations around medium-range orders and its impact on dislocation interactions in equiatomic CrCoNi medium entropy alloy	55
Generating 3D porous structures using machine learning and additive manufacturing	55
Additive, subtractive and formative manufacturing of glass-based functional micro/nanostructures: A comprehensive review	55
Thermoregulating textiles and fibrous materials for passive radiative cooling functionality	54
On the stability of coherent HfRu- and ZrRu-B2 precipitates in Nb-based alloys	54
Achieving high strength, plasticity and conductivity in Cu/Cu-graphene oxide laminated composites with extremely low content of graphene oxide	54
Modifying microstructure and mechanical properties of twin-wire directed energy deposition-arc (TW-DED-arc) fabricated Ti-48Al-2Cr-2Nb alloy via ultra-high frequency pulsed (UHFP) current	54
Micro-arranged ZnO particles and conductive fillers in PCL composites for enhanced piezoelectric and dielectric properties in bone tissue engineering applications	54
Electrically assisted stereolithography 3D printing of graded permittivity composites for in-situ encapsulation of insulated gate bipolar transistors (IGBTs)	54
3D-printed prosthetic foot design: Mechanical similarity and testing	54
3D bioprinting advanced biomaterials for craniofacial and dental tissue engineering – A review	53
Dispersion strategies development for high-performance carbon nanomaterials-reinforced cementitious composites − critical review on properties and future challenges	53
Ferroelectric heterostructure nanocomposites based on Bi2MoO6 nanosheets and Bi2S3 nanorods for rapid piezocatalysis of organic dyes and antibiotics	53
Design and facile manufacturing of tri-layer laminated polyolefin microfibrous fabrics with tailoring pore size for enhancing waterproof breathable performance	53
Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy	53
A chitosan-based hydrogel sealant with effective closure for sutureless dural	53
Fucoidan-based coating on magnesium alloy improves the hemocompatibility and pro-endothelialization potential for vascular stent application	52
Tuning superior hydrophobic performance of Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) via polydimethylsiloxane-based bulk modification	52
Melt-Electrowritten Poly(L-lactic acid)- and Bioglass-Reinforced biomimetic hydrogel for bone regeneration	52
Revealing the governing factors for long-term radiation damage evolution in multi-principal elemental alloys through atomistically-informed cluster dynamics	52
Cobalt ferrite/cellulose membrane inserted catalytic syringe filter for facile in-situ filtration/degradation of emerging organic pollutants in water via activating peroxymonosulfate	52
Interfacial reconstruction of 2D/2D ZnIn2S4/HNb3O8 through Nb-S bonds for efficient photocatalytic H2 evolution performance	52
Experimental study of crack diversion, bridging mechanisms and enhanced delamination strength by dispersed carbon nanotubes in glass fibers composite laminates	51
Technical basis of using laser direct energy deposition as a high-throughput combinatorial method for DC-cast Al-Mn alloy development	51
Magnetic-responsive materials tailored to enhance the cascade of bone regeneration and immune response	51
Rapid and ultrasensitive detection of SARS-CoV-2 spike protein based on upconversion luminescence biosensor for COVID-19 point-of-care diagnostics	51
Mechanism model of dynamic polyurethanes with two scales of nodes to regulate mechanical property	51
Natural polyphenol-loaded cross-linked lipoic acid vesicles treat triple-negative breast cancer by cancer cell killing and metastasis inhibition	51
AI-based real-time prediction of cross-sectional phase distribution during laser heat treatment via sequential thermal imaging and image-to-image synthesis	50
Injectable chitosan-based hydrogels harnessing resveratrol micelles for treatment of infected wounds	50
Sustainable gambogic acid release via pH/Redox Dual-Responsive C60-Modified magnetic mesoporous nanospheres for antitumor therapy	50
Origin of coercivity difference in Nd-Y-Fe-B single-main-phase and multi-main-phase magnets: Role of core–shell structures	50
MOG derived high-properties (ZrHfNbTaCr)C high-entropy nanoparticles to fabricate ceramics	50
Exploring the brittle-to-ductile transition and microstructural responses of γ	50
Mechanical analysis of unidirectional glass fibre reinforced epoxy composite joints manufactured by adhesive bonding and co-curing techniques	50
Multispectral metasurface for visible transparency, infrared stealth, and mm-Wave frequency-multiplexing	50
Ultrafast laser-induced topochemistry on metallic glass surfaces	50
The current state of CuCrZr and CuCrNb alloys manufactured by additive manufacturing: A review	49
Biomimetic collagen composite matrix-hydroxyapatite scaffold induce bone regeneration in critical size cranial defects	49
The energy absorption capacity of a novel dual-sub-fold Miura foldcore subjected to axial crushing	49
Cryoprinting of nanoparticle-enhanced injectable hydrogel with shape-memory properties	49
Elucidating the impact of severe oxidation on the powder properties and laser melting behaviors	49
Tuning surface curvatures and young's moduli of TPMS-based lattices independent of volume fraction	48
Pre-aging combined with multi-stage rolling processing: Enhancing precipitate-dislocation interaction for strengthening of Cu-Cr-Zr-Ni-Si alloy	48
One-step fabrication of multiphasic Janus microparticles with programmed degradation properties based on a microfluidic chip	48
A universal strategy for flexible, efficient and programmable crashworthiness under quasi-static and dynamic loadings based on plastic deformation of metals	48
Modelling and measurements of thermally induced residual stress in IN718 nickel-based superalloy during non-uniform quenching	48
Laser-assisted ultrasonic elliptical vibration turning of high-volume fraction SiCp/Al force-thermal research	48
Nano-in-micro alginate/chitosan hydrogel via electrospray technology for orally curcumin delivery to effectively alleviate ulcerative colitis	48
Superior hemostatic and wound-healing properties of tetrastigma polysaccharide	48
Development of the γ′ phase strengthened high-temperature high-entropy alloys with excellent mechanical properties	47
Facile synthesis of Ag nanoparticles/Ti3C2Tx/polyacrylamide composite hydrogel as efficient catalyst for methylene blue and 4-nitrophenol reduction	47
Effect of magnetic field on precipitation kinetics and shear strength of Sn58Bi-Ni solders	47
Plastic deformation mechanism and hardening mechanism of rolled Rare-Earth magnesium alloy thin sheet	47
Addition of niobium in Fe-13Cr-4.5Al-2Mo alloy used as ATF cladding: Effect on high temperature water corrosion and in-situ electrochemistry	47
Reducing out-of-band radar cross-section of metasurface-based radome composites via beam-scattering mechanism	47