Thin-Walled Structures

Papers
(The TQCC of Thin-Walled Structures is 14. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Hysteretic performance of structural steels after exposure to elevated temperatures240
Experimental study on S700 T-stub in heating and cooling during fire231
VSI: TWS in extreme loading175
Structural behavior of stainless steel anchor channels embedded in concrete under perpendicular and longitudinal shear158
Editorial Board143
Reply to “A comment on buckling and postbuckling response of nonlocal strain gradient porous functionally graded micro/nano-plates via NURBS-based isogeometric analysis” [Thin-Walled Struct. 184 (2023134
Experimental and numerical investigations on buckling behaviours of axially compressed cylindrical–conical–cylindrical shells at elevated temperature131
Revisiting the design of the rivet chamfered ends in double-sided self-pierce riveting129
Editorial Board128
Model analysis of inflated curved beam considering pressure follower force effect126
Design of lattice metamaterials under the equal strength concept and research on the mechanical properties of their sandwich structures125
A general higher-order model for vibration analysis of axially moving doubly-curved panels/shells115
Deformation behavior and failure mechanism of AA7075 alloy during the cryogenic temperature-assisted incremental sheet forming process109
Mechanism of reproducible axial impact of square crash boxes106
Experimental behaviour of diagonally stiffened steel I-girders106
Dynamic three-point bending tests under high loading rates104
Seismic design-assisted-by-testing approach for racks with dissipative baseplates in the cross-aisle direction102
Sensitivity analysis for buckling characterisation using the vibration correlation technique96
Wind-induced response of saddle membrane structure under typhoon wind field by weather research and forecasting model and computational fluid dynamics94
Editorial Board92
A time variational method for computing nonlinear normal modes of a thin highly flexible cantilever beam and its experimental evaluation using phase resonance approach91
Impact resistance and fire resistance of solid waste based interface self-assembled fiber reinforced composite structures83
Behaviour of a novel stiffener-enhanced steel–concrete–steel sandwich beam subjected to impact loading82
Nonlinear performance analysis and rapid prediction of out-of-plane deformation in graded honeycombs82
Thermal creep of hybrid steel columns comprising ultra-high strength steel tubes and stainless steel plates under transient fire conditions82
Splitting and curling collapse of metal foam core square sandwich metal tubes: Experimental and theoretical investigations79
Structural analysis of FRP laminate with triangle convexities (FLTC) using the VAM-based equivalent model79
Deformation response research on aluminum sheets with different central pre-cracked defects under quasi-static hydraulic pressure loading78
Experimental investigation and design recommendations for bearing performance of low yield point steel bolted connection77
Novel low-order continuum models for the dynamic behaviour of microstructured plates based on a beam-grid lattice75
Nonlinear modeling and dynamic analysis of a vertical plate under inside bulk cargo and outside subsonic airflow75
Efficient approach to plastic wrinkling prediction for multi-intersecting stiffened panels in spherical die forming74
Research on the material flow and joining performance of two-strokes flattening clinched joint72
Investigations on deflection effect of a Z-shaped grillage subjected to an obliquely penetrating ogive-nose projectile72
Experimental and numerical study of high-strength materials on slender steel-reinforced CFST columns in fire71
Axial compression behavior of FRP-confined steel-reinforced columns with a flange-broadened cross-shaped steel70
Dynamic response of clamped metallic thin-walled cylindrical shells under lateral shock loading70
The influence of sandwich panel cladding on horizontal structure stiffness69
Experimental study of laser-welded stainless steel angle columns68
Low-cycle fatigue behaviour of stainless-clad bimetallic steel welded connections68
An extension of composite bending strain κMITC3+ scheme in analysis of shell structures reinforced with rib stiffeners68
A generalized methodology for thermoelastic damping in axisymmetric vibration of circular plate resonators covered by multiple partial coatings68
Optimizing microstructure and strength of CMT-wire arc additive manufactured WE43 Mg alloy through a novel active cooling technique67
Dynamic response of a thin-walled curved beam with a mono-symmetric cross-section under a moving mass66
A compact vibration isolator based on a structural-functional integrated lattice66
Multi-objective design optimization using hybrid search algorithms with interval uncertainty for thin-walled structures66
Structural performance and section classification of austenitic stainless steel welded I-section flexural members65
In situ chemical bonding at the 30 wt.% GF/PA6-A2024 aluminium alloy interface via ultrasonic-assisted injection moulding65
Experimental characterization of the mechanical and functional performance of innovative ultra-low carbon sandwich panels and envelope systems for buildings64
On the strength–ductility trade-off in thin blast-loaded steel plates with and without initial defects — An experimental study63
Passive thermal driving mechanics of a bistable composite tape-spring63
Fabrication, mechanical properties, and multifunctionalities of particle reinforced foams: A review62
Design method of axial compression stability for cross-section corrugated plate steel special-shaped column61
Numerical predictions of intralaminar and interlaminar damage in thin composite shells subjected to impact loads61
Numerical analysis of the global stability of simply supported cellular steel columns under axial compression61
Experimental and numerical investigation into the dynamic impact responses of CFRP header rail61
Behavior of steel plate shear walls reinforced with stiffened FRP plates61
Comprehensive studies on the behaviors of high strength steel T-stubs with thin-walled flange at elevated temperatures60
Cold-formed steel centre-sheathed (mid-ply) shear walls of intermediate resistance59
Artificial intelligence-based modeling of extruded aluminum beams subjected to patch loading58
Vibration analysis and suppression of axially moving composite laminated plates with modified energy method and piezoelectric shunt damping circuits58
Influence of oblique low velocity impact on damage behavior of 2D and 3D woven composites: Experimental and numerical methods56
Mechanical properties of re-entrant anti-chiral auxetic metamaterial under the in-plane compression56
Experimental residual capacity of steel-reinforced concrete-filled steel tubular stub columns after fire exposure56
Dynamic stability of different kinds of sandwich plates using third order shear deformation theory56
Nonlinear flutter analysis of quadrilateral plates consisting of functionally graded carbon nanotubes reinforced composites using Isogeometric Analysis55
Excellent ballistic performance of B4C/shear thickening fluid (STF)/ZnO aramid composite fabric55
Tessellated multistable structures integrated with new transition elements and antisymmetric laminates55
Magnetoelastic simultaneous resonance of axially moving plate strip under a line load in stationary magnetic field54
Damage mechanisms of composite laminates under impact loading including the effect of pre-load54
Optimizing deployment dynamics of composite tape-spring hinges54
Crashworthiness of bio-inspired multi-stage nested multi-cell structures with foam core54
Design method for distributed dynamic vibration absorbers of stiffened plate under different boundary constraints53
Free vibrations of all assemblies related to coupled hyperboloidal–cylindrical shells53
Warpage analysis of multilayer thin film/substrate systems using the Eigenstrain method53
Odd mechanical metamaterials with simultaneously expanding or contracting under both compression and tension53
Experimental study on stability of orthotropic steel box girder of self-anchored suspension cable-stayed bridge53
Sound radiation suppression in a plate-cavity coupling system under acoustic excitation using ABH-DVA53
Instability-driven family optimization of cold-formed steel lipped-channel cross-sections with strength and stiffness constraints52
Mesoscopic statistics-based probability characteristics of chloride transport and reliability-based corrosion initiation life of bridge tower52
Geometrically nonlinear topology and fiber orientation optimization of composite structures using membrane-embedded model52
Dynamic failure of aramid paper honeycomb under intermediate strain rate loading52
Investigation of vibration suppression performance of composite pyramidal truss sandwich cylindrical shell panels with damping coating51
Energy absorption of additively manufactured functionally bi-graded thickness honeycombs subjected to axial loads51
Tailored twisted CNT bundle with improved inter-tube slipping performances50
The effect of cross-section geometry on the lateral–torsional behavior of thin-walled beams: Analytical and numerical studies50
Effect of openings on lateral behaviors of corrugated plate module walls and high-rise modular buildings50
Fire performance of superabsorbent polymers protecting cold-formed steel walls with high load ratios50
Flexural performance of high strength grouted SHS tube-sleeve connection for modular construction49
Similarity design method for dynamic characteristics of rotating composite blades in thermal environment49
Experimental and numerical study on mechanical behavior of hybrid multi-cell structures under multi-crushing loads49
Performance of recycled aggregate concrete-filled high-strength steel tubes under axial compression, tension and torsion49
Confinement-based direct design of circular concrete-filled double-skin normal and high strength steel short columns48
Nonlinear free and forced vibration of porous piezoelectric doubly-curved shells based on NUEF model48
Damping characteristics of carbon nanotube reinforced epoxy nanocomposite beams48
Retrofitting of hybrid cable domes against strut buckling using di-pyramid (DP) module and force-limiting devices (FLD)48
Vibration analysis of spinning porous cylindrical shell coupled with multiple plates assembly structures reinforced by graphene nanoplatelets48
Approximate closed-form solution for buckling of orthotropic plates with longitudinal edges elastically restrained against rotation48
Compressive behaviour and design of compact to slender octagonal concrete-filled steel tubular stub columns47
Local buckling behaviour of stainless-clad bimetallic steel built-up square hollow section stub columns47
Fire resistance time prediction and optimization of cold-formed steel walls based on machine learning47
Hierarchical multiscale analysis for 3D woven composite leaf spring landing gear47
Shear performance of horizontally curved steel box bridge girders under hydrocarbon fire exposure conditions: Numerical investigation and design implications47
Vortex-induced vibration of a functionally graded metamaterial plate attached to a cylinder in laminar flow46
A coupled micromechanics and elastoplastic phase field method for fracture in graphene/metal composites46
The characterization of the flexural and shear performances of laminated aluminum/ jute–basalt fibers epoxy composites containing carbon nanotubes: As multi-scale hybrid structures46
Joining mechanism and damage of self-piercing riveted joints in carbon fibre reinforced polymer composites and aluminium alloy46
Experimental and theoretical studies on 3D printed short and continuous carbon fiber hybrid reinforced composites46
Large-size shape memory alloy plates subjected to cyclic tension: Towards novel self-centring connections in steel frames46
A negative-stiffness based 1D metamaterial for bidirectional buffering and energy absorption with state recoverable characteristic45
Design, additive manufacturing, and characterisation of a three-dimensional cross-based fractal structure for shock absorption45
Shape memory alloy plates: Cyclic tension-release performance, seismic applications in beam-to-column connections and a structural seismic demand perspective45
A multiscale Gaussian expansion method for low-frequency multimodal damping analysis of variable stiffness acoustic black hole beams45
Strut and stochastic polymer reinforcement interpenetrating phase composites: Static, strain-rate and dynamic damping performance45
Test and design of built-up cold-formed steel-lightweight concrete (CFS-LWC) composite beams45
Nonlinear guided wave mixing in weld joints for detection of material nonlinearity44
Study on fatigue behavior of butt-welded high-strength steel connections with surface cracks44
Comparative study on collapse behavior of modular steel buildings: Experiment and analysis44
Effect of moisture-heat coupling on mechanical behavior of nano-SiO2 adhesives and CFRP-steel lap joints44
Dynamic stability of a lossy locally resonant metamaterial panel in supersonic flow44
A theoretical model for the estimate of the reaction force for 3D auxetic anti-tetra chiral tubular structures under tensile loads44
Modular reverse design of acoustic metamaterial and sound barrier engineering applications: High ventilation and broadband sound insulation44
Impact of a spherical body on an air-inflated membrane structure44
The nonlinear dynamic buckling behaviour of imperfect solar cells subjected to impact load43
Mechanical and piezoresistive performance of additively manufactured carbon fiber/PA12 hybrid honeycombs43
Geometric effects on the fracture toughness and delamination behaviors of carbon fiber/polyetherketoneketone composites with open holes and bolted joints42
Discrete adaptive mesh refinement for equivalence modelling of planar beamlike periodic truss with rigid joints42
Optimizing continuous fiber-reinforced textile preforms forming: Minimizing wrinkling through precision slitting42
Design and analysis of parabolic membrane crease inspired by origami42
Approximate closed-form solutions for free vibration of circular arches with discrete lateral braces41
Corrosion-induced mechanical properties of shear bolted connections in high-strength weathering steel41
Pressure and stress characteristics of transformer tank with power-frequency arc fault in oil41
Structural performance of cold metal transfer welding technique on cold-formed steel flare v-groove welds41
Effect of geometric defects on the mechanical properties of additive manufactured Ti6Al4V lattice structures41
Mixed mode nonlinear response of rectangular plates under static and dynamic compression41
Flexural capacity and local buckling half-wavelength of high strength steel tubular beams under moment gradients: An experimental study41
Modeling and analysis of assembly variation with non-uniform stiffness condensation for large thin-walled structures40
Strength reserve assessment on pitting-corroded jacket offshore platforms based on the modified generalized constitutive model40
Ballistic performance of thin CFRP laminates under complex in-plane preload40
Elastic–plastic buckling behaviour of beetle elytron plate with simple, fixed and flexible core supports40
Experimental investigation on hysteretic properties and applications in beam-column connections of shape memory alloy plates40
Non-destructive characterization of cylindrical shells by probing: Identification of the probing location from energy barrier and probing forces using Measured Geometric Imperfections (MGI)40
A novel beam element with nine DOFs per node for resolving the warping-distortion compatibility in analysis of frames and curved beams made of I-sections40
Experimental and numerical study on the protective mechanism of the full helmet subjected to blast loadings40
Optimization design of screen pipes hole arrangement parameter based on collapse strength39
Anisotropic hyperelastic/plastic behavior on stress-constrained thin structures by iterating on the elastic Cauchy–Green tensor39
Performances of coupled the partition of unity finite element method and the discrete shear gap method for the analysis of 3D vibro-acoustic problems39
High-frequency vibration analysis of panels under aerothermoelastic effects in supersonic airflow by an energy finite element method39
Hysteretic energy dissipation capacity of dual-steel welded-plate preloaded bolted T-stubs39
Test and simulation of high temperature resistant polyamide composite with single lap single bolt connection39
Internal resonance and nonlinear dynamics of an axially moving FGM sandwich cylindrical shell39
Exact solutions for the elastic-plastic response of functionally graded pipe under external pressure39
Explicit finite element method for nonlinear flutter analysis of composite panels39
Two-dimensional full-field displacement reconstruction of lattice towers using data fusion method: Theoretical study and experimental validation39
Postbuckling behaviour of anisotropic shear deformable laminated cylindrical shells with general imperfection distribution subjected to torsion38
Cold-formed steel beam-to-column bolted connections for seismic applications38
Flexural zero-space waveguide arrays for waves in thin-elastic plates38
Experimental and numerical investigations of Q690 high-strength steel welded I-section columns with pitting corrosion38
Structural behaviour of folded timber sandwich structures38
Buckling load optimization of sandwich plates with trapezoidal corrugated core and elliptical cutout using vibration correlation techniques and artificial neural network; experimental and numerical an38
Optimization design of cylindrical rivet in flat bottom riveting38
Nonlocal analysis of Rayleigh wave characteristics in piezo-thermoelastic transversely isotropic medium with energy dissipation37
Impact dynamic response of large aperture space deployable antenna supporting structures based on a dual-scale model37
Numerical modeling on thin-walled cold-formed steel clip angles subjected to pull-out failures37
Three-dimensional hygro-thermo-mechanical bending analysis of anisotropic skewed parallelogram plates on a tri-parameter foundation using a wavelet method37
The effects of superstructure form on damage characteristics of ship subjected to underwater explosion37
An optimization method of wall thickness distributions in T-shaped tube compound-forming method with unconventional tube blank36
Global buckling of S35657 austenitic stainless steel welded box- and I-section long columns under axial compression36
Energy absorption characteristic of auxetic metamaterials honeycombs and lattices with negative thermal expansion36
Dynamic response mechanisms of thin UHMWPE under high-speed impact36
On quasi-static behaviors of different joint methods for connecting carbon fiber reinforce plastic (CFRP) laminate and aluminum alloy36
Evaluation of the pressure-resisting capability of membrane-type corrugated sheet under hydrodynamic load36
A resonator inspired by spider web for wave propagation in planar periodic lattice36
Thermo-mechanical vibration and stability behaviors of bi-directional FG nano-pipe conveying fluid36
A shell theory approach for the analysis of metal-FRP hybrid toroidal pressure vessels36
Fatigue tests and design of CFRP-strengthened CHS gap K-joints36
Experimental investigation of liquid-tank interaction effects on full containment LNG storage tanks through shaking table tests36
Nonlinear large-amplitude vibration analysis of annular sector plates made of FGMs subjected to cooling shock35
Residual compressive behaviour and CFRP strengthening of SRCFST columns after combined damage of fire and lateral impact35
Experimental and numerical study of hysteresis behavior of innovative hybrid steel-timber shear wall system35
A new electro-mechanical finite formulation for functionally graded graphene reinforced composite laminated thick plates with piezoelectric actuator35
Optimal kernel extreme learning machine model for predicting the fracture state and impact response of laminated glass panels35
Enabling sequential logic leveraging time delays of thin-walled soft matter35
Numerical study on the effects of alloying variations on the crushing behaviour of an aluminium profile35
Editorial Board35
First-order and linear buckling analysis of thin-walled cylinders using new GBT deformation modes35
Damage evolution and failure mechanism of asymmetric composite laminates under low-velocity impact and compression after impact35
Finite element prediction of first-ply failure loads of composite thin skewed hypar shells using nonlinear strains35
Crashworthiness design and impact tests of aluminum foam-filled crash boxes35
A new buckling model for thin-walled micro-beams based on modified gradient elasticity: Coupling effect and size effect35
Shear capacity of single- and double-layered gypsum board to steel stud screw connections in non-structural partitions35
Impact resistance of cork-skinned marine PVC / GRP sandwich laminates34
Editorial Board34
Structural response of monolithic and multi-stacked AA2014-T6 sheet specimens subjected to shock loading34
Bond behavior of CFRP-concrete with surface groove subjected to chloride wet-dry cycles: Experimental, strength model and design method34
Deformation of thin metal and composite sheets by using anti-buckling fixture for large deformation under tension–compression cyclic loading34
Editorial Board34
The analysis and prediction of nonlinear damping characteristics of partially filled all-composite honeycomb-core sandwich panels34
Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction34
Investigation on local compressive performance of corrugated web I-girder with rectangular grouted tubular flange34
Development of a unified design buckling curve for fibre reinforced polymer plates subjected to in-plane uniaxial and uniform compression34
Vibration analysis of rotating variable-angle-tow composite cylindrical structures via high-fidelity shell models34
Vibration analysis of a cylindrical shell by using strain gradient theory via a moving Kriging interpolation-based meshfree method34
Aerogel honeycombs with orientation-induced microstructures for high-temperature lightweight composite sandwich structures33
Coupled dynamic instability of graphene platelet-reinforced dielectric porous arches under electromechanical loading33
Surface microtexturing design, laser-etching and adhesive failure of aluminum alloy single-lap-joint: Experiment and simulation33
Composite mechanical deformation based semi-analytical prediction model for dynamic loaded contact pressure of thin-walled aerospace spiral bevel gears33
Study of local buckling performance of 7075-T6 high-strength aluminium alloy H-section stub columns33
Design shear strength of CWGs with web-circular opening made of HSB800-high strength steel33
Mitigating hydrodynamic ram effect by a novel perforated lattice filled tank33
Oblique compression of square tubes with walls of different thicknesses33
Experimental and numerical research on deformation of square plates with circular holes under blast load33
Experimental and analytical studies on a novel double-stage coupling damper33
Structural design and axial compression test of novel carbon-fiber-reinforced polymer truss supporting rear connection-ring33
Elastic–plastic bifurcation analysis of cylindrical shells with axisymmetric variable thickness33
Numerical simulation study on mesoscopic metallic foam core sandwich panels under hypervelocity impact33
Experimental and numerical investigations of S960 ultra-high strength steel slender welded I-section columns failing by local–flexural interactive buckling33
Experimental study on the bearing capacity and fatigue life of lightning rod structure joints in high-voltage substation structures33
Block shear failure of austenitic stainless steel bolted connections33
Development of a novel full-scaled self-centering brace with notched steel tubes32
A review on the assessment methods of bridge against ship collision32
Investigation of buckling characteristics of cracked variable stiffness composite plates by an eXtended Ritz approach32
On the winding pattern influence for filament wound cylinders under axial compression, torsion, and internal pressure loads32
A size-dependent electro-mechanical buckling analysis of flexoelectric cylindrical nanoshells32
Behavior of CFRP-strengthened short spiral welded tubes under axial load32
Design and analysis of novel negative stiffness structures with significant energy absorption32
Dynamic responses of aluminum alloy plates coated with polyurea elastomer subjected to repeated blast loads: Experimental and numerical investigation32
Experimental characteristics and coupled nonlinear forced vibrations of axially travelling hyperelastic beams32
A comparative study of three forms of an uncoupled damage model as fracture judgment for thin-walled metal sheets31
Local–overall interactive buckling behaviour of 800 MPa high-strength steel welded H-section members under axial compression31
Experimental response of hot-rolled stainless steel angle columns31
The energy absorption of a shrinking–expanding circular tube: An experimental and numerical investigation31
Spectral element-finite element modeling and dynamic analysis of a fluid-delivering cracked pipe subjected to both pulsation and base excitations31
Effects of random corrosion on seismic performance of an un-anchored steel storage tank31
Theoretical study of entropy-induced friction in graphene31
Experimental investigation blast resistance of CFRP/polyurea composite plates under blast loading31
Nano-cementitious composites modified with Graphene Oxide – a review31
Free vibration analysis and optimization of doubly-curved stiffened sandwich shells with functionally graded skins and auxetic honeycomb core layer31
Mechanical characteristic and stress-strain modelling of friction stir welded 6061-T6 aluminium alloy butt joints31
Experimental and numerical investigations of damage and ballistic limit velocity of CFRP laminates subject to harpoon impact31
Editorial Board31
Equivalent layer-wise theory for the hygro-thermo-magneto-electro-elastic analysis of laminated curved shells31
Experimental and numerical investigation of a novel vertically unconstrained steel inter-modular connection31
Enhancing the reliability of laser welded-brazed aluminum/stainless steel joints via laser-chemical hybrid surface texturing31
Local buckling of FRP thin-walled plates, shells and hollow sections with curved edges and arbitrary lamination31
A flexible design framework for lattice-based chiral mechanical metamaterials considering dynamic energy absorption31
Free vibrations of axially loaded thin-walled shaft-disk rotors subjected to non-uniform temperature field31
Free vibration and stability analyses of functionally graded plates resting on elastic foundations based on 2D and quasi-3D shear deformation theories using the finite strip method31
Shape sensing of the thin-walled beam members by coupling an inverse finite element method with a refined quasi-3D zigzag beam theory31
An analytical method for out-of-plane stability assessment of network arch bridges30
0.086131811141968