Composite Structures

Papers
(The median citation count of Composite Structures is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-03-01 to 2025-03-01.)
ArticleCitations
Dynamic structural responses of high-performance fiber-reinforced cement composites panels subjected to high-velocity projectile impact loadings547
Editorial Board210
Prediction of ground reaction forces using the artificial neural network from capacitive self-sensing values of composite ankle springs for exo-robots194
Design of Artificial Neural Networks for Damage Estimation of Composite Laminates: Application to Delamination Failures in Ply Drops194
Structural behavior of steel dowel-reinforced cross-laminated bamboo and timber beams186
Effectiveness of FRP strengthening on buckling characteristics of metallic cylindrical shells170
Impact of polyurea-coated metallic targets: Computational framework165
Investigations on the influence of boundary and loading conditions on the shear resistance of FRP concrete beams without shear reinforcement160
Energy absorption behavior of aramid/DCPD backing to determining the blunt trauma criterion of a human head in a ballistic helmet149
Probabilistic ultrasound C-scan imaging of barely visible impact damage in CFRP laminates144
Hygrothermal ageing of composite structures. Part 2: Mitigation techniques, detection and removal141
Design of variable stiffness composites for maximum fundamental frequency considering manufacturing constraints of tow steering138
A nonlocality-based homogenization method for dynamics of metamaterials133
Phase-field simulation of delamination in laminated composite plates: Isogeometric formulation126
Geometrically nonlinear bending analysis of variable stiffness composite laminated shell panels with a higher-order theory124
Vibration suppression and impact mitigation of locally resonant composite metamaterial columns114
Buckling state analysis of compressed composite plates with cut-out112
Hygrothermal degradation of elastic properties of fiber reinforced composites: A micro-scale finite element analysis106
Failure modes and energy absorption mechanism of CFRP Thin-walled square beams filled with aluminum honeycomb under dynamic impact102
Energy absorption behavior of filament wound CFRP origami tubes pre-folded in Kresling pattern102
Inward crushing of square and round carbon/aramid multiple-segment tubes under axial quasi-static loading97
Polymer Matrix Composites: The case of pentamodes96
Evolutionary topology optimization of fiber reinforced composite laminates for maximum stiffness94
Damage characterization of CFRP /steel double-lap bonded joints based on AE and DIC93
Retraction notice to “Influence of hygrothermal effect on dynamic buckling of composite slender column” [Compos. Struct. 267 (2021) 113852]92
Numerical and mechanical analysis of laminated PA11/twill basalt composites with enhanced flame behavior91
Exploring the nonlinear response of cracked variable stiffness composite plates using plate decomposition method91
On characterization of transverse tensile properties of pultruded glass fiber-reinforced polymer (PGFRP) profiles based on non-standard short coupons89
Editorial Board87
Thermo-Mechanical analysis of laminated Doubly-Curved Shells: Higher order Equivalent Layer-Wise formulation86
Enhanced mechanical properties of re-entrant auxetic honeycomb with self-similar inclusion86
Confinement of masonry with FRCM composites: Strength predictive models86
Effects of ZnO morphology on tribological behaviors of polyarylene ether nitrile composites85
Vibration analysis and optimal design of multiscale hybrid flax fiber/graphene nanoplatelets reinforced laminates using modified differential evolution algorithm84
Investigating the mode one interlaminar performance of semi-woven 3D printed hybrid composites82
A cracked-hinge approach to modelling high performance fiber-reinforced concrete82
Solution of nonlinear vibration problem of shear deformable multilayer nonhomogeneous orthotropic plates using Poincare-Lindstedt method82
Modeling on displacement response and damage mechanism of contact interface during installation for composites sleeved interference joint81
Tailoring band gap properties of curved hexagonal lattices with nodal cantilevers80
Design of a set-up for measuring the residual compressive strength after high load and high cycle compression fatigue on CFRP80
On the pummel test and pummel-value evaluation of polyvinyl butyral laminated safety glass79
Reliability evaluation of critical local buckling load on the thin walled cylindrical shell made of composite material79
Non-linear buckling analysis of delaminated hat-stringer panels using variational asymptotic method76
Efficient equilibrium-based stress recovery for isogeometric laminated Euler–Bernoulli curved beams76
Stress state failure analysis of thin-walled GLARE composite members subjected to axial loading in the post-buckling range76
Effect of elevated temperatures on the compressive behavior of timber filled steel and pultruded GFRP tubes75
A FEM-based model to study the behavior of SRG-strengthened R/C beams74
Thermo-mechanical performances of elastic–porous materials with metallic wire mesh structures73
Effects of moisture absorption on penetration performance of FRP sandwich structures72
On the behaviour of flattened tubular Bi-axial and Tri-axial braided composites in tension72
Seismic retrofitting of coastal structural columns with steel bars locally corroded to fracture using sprayed ECC overlays and FRP jackets72
Functionality of production processes in mycelium-based composites70
Viscoelastic homogenization of 3D woven composites with damping validation in temperature and verification of scale separation69
A Coupled Mori–Tanaka model and FEM RVE approach for the geometrical nonlinear dynamic response of the FG-CNTRC plate based on a novel shear strain function using isogeometric finite element procedure68
A new study for aeroplane wing shapes made of boron nitride nanotubes-reinforced aluminium, Part I: review, dynamical analyses and simulation67
Acoustic wave transmission characteristics of stiffened composite shell systems with double curvature67
Fabrication and bending performance of ultra-low-density all-composite honeycomb sandwich shell based on stretching process67
Long-term performance of 15-year-old full-scale RC beams strengthened with EB FRP composites67
Modelling and design of hierarchical fibre-graphene nanoplatelets reinforced elasto-viscoplastic polymer matrix composites to improve crashworthiness and energy absorption66
Piecewise power law approximation of the interlayer relaxation curve for the long term viscoelastic fractional modeling of laminated glass66
Snap-through of bistable variable stiffness laminates using MFC actuators65
Influence of fatigue damage on the impact performance of toughened-interleave carbon fibre epoxy composite laminates65
Composite structures subjected to underwater explosive loadings: A comprehensive review65
Multi-objective optimization for free vibration of L-shaped bi-functionally graded sandwich plates using an effective finite element method and non-dominated sorting genetic algorithm II65
Spring-in of composite L-shape specimens: An experimental and numerical investigation64
Vibration response analysis of exponential functionally graded piezoelectric (EFGP) plate subjected to thermo-electro-mechanical load64
Dynamic splitting behaviour of ultra-high-performance concrete confined with carbon-fibre-reinforced polymer64
An innovative digital image correlation technique for in-situ process monitoring of composite structures in large scale additive manufacturing63
Constitutive model for fibre reinforced composites with progressive damage based on the spectral decomposition of material stiffness tensor63
Investigation on tearing damage of CFRP circular cell honeycomb in end-face grinding63
Micro-scale modeling of 3D needled nonwoven fiber preforms63
An experimental and numerical investigation of the ballistic penetration behavior and failure mechanism of 3D MWK composites63
Functionally graded carbon nanotubes reinforced composite structures: An extensive review62
Exact solutions for bimorph cross-ply and antisymmetric angle-ply plate piezoelectric energy harvesters62
Nonlinear eigenfrequency characteristics of multi-directional functionally graded porous panels61
Fatigue behavior and digital image correlation monitoring of steel plates with mixed-mode edge cracks repaired with CFRP materials61
Fluid-structure interaction analysis of nonlinear flapping dynamic behaviors of variable stiffness composite laminated plates in viscous flows61
Shear strengthening of reinforced concrete beams using geopolymer-bonded small-diameter FRP bars60
Composite interlaminar fracture toughness imparted by electrospun PPO veils and interleaf particles: A mechanistical comparison60
Fabric-to-cementitious matrix bond behavior in carbon fabric reinforced cementitious matrix (FRCM) composites with added short fibers60
Stochastic interpretable machine learning based multiscale modeling in thermal conductivity of Polymeric graphene-enhanced composites59
Axial compressive behavior of ultra-high-strength steel fiber-reinforced concrete-filled fiber reinforced polymer (FRP) tube columns59
Refined multilayered beam, plate and shell elements based on Jacobi polynomials59
Crashworthiness and energy absorption of UHPFRC-steel composite sandwich structures under impact loading59
Experimental testing of novel hybrid rubberised concrete double skin tubular columns with filament wound CFRP tube under axial compressive loading59
Steered fiber paths for improved in-plane compressive response of aerostructural panels: Experimental studies and numerical modeling59
Adaptive deep homogenization theory for periodic heterogeneous materials58
Prestress loss and flexural behavior of precracked RC beams strengthened with FRP/SMA composites58
Assessment of failure mechanism of double-strap 3D-FML adhesively bonded joints under tensile and compressive loadings using cohesive zone modelling approach58
Automatic segmentation and fibre orientation estimation from low resolution X-ray computed tomography images of 3D woven composites58
Fabrication and analysis of integrated multifunctional MWCNTS sensors in glass fiber reinforced polymer composites58
Research on eccentric compressive behavior of steel fiber reinforced recycled concrete-filled GFRP tube columns58
A non-linear direct peridynamics plate theory57
Analytical study on the behavior of CFRP-concrete bonded joint with a non-rigid end-anchor57
Multi-scale analysis of the interface structure and failure behaviors for n-SiO2@jute fiber/PP composites56
Vibration analysis of functionally graded beams using a higher-order shear deformable beam model with rational shear stress distribution56
An enhanced higher order zigzag theory for laminated composite plates under mechanical/thermal loading56
Flexural waves in thermoelastic higher-order shear micro-plate modelled by spatiotemporal fractional differential56
Tolerance modelling of vibrations of thin functionally graded cylindrical shells56
Compression after high-velocity impact behavior of pseudo-elastic shape memory alloy embedded glass/epoxy composite laminates55
A new MAX phases-based electroconductive coating for high-temperature oxidizing environment54
Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs54
Circuit-analog radar absorbing structures using a periodic pattern etched on Ni-coated glass fabric54
On axial crushing behavior of double hat-shaped CFRP and GFRP structures54
Thermomechanical analysis of snap-buckling phenomenon in long FG-CNTRC cylindrical panels resting on nonlinear elastic foundation54
On the experimental validation of Ludwick law to predict critical buckling load of nonlinear elastic columns54
Stiffness-driven design and optimization of a 3D-printed composite prosthetic foot: A beam finite Element-Based framework54
Important contributions of metal interfaces on their tribological performances: From influencing factors to wear mechanisms53
Nonlinear dynamic instability and multi-objective design optimization of the GPLR-FGP plate under biaxial impacts53
Editorial Board53
Place smart, load hard - structural reinforcement of the trailing edge regions of a wind turbine blade strengthening the buckling resistance52
Editorial Board52
Introducing a novel piezoelectric-based tunable design for mode-localized mass micro-sensors52
Editorial Board52
Editorial Board52
A sophisticated periodic micro-model for closed-cell foam based on centroidal constraint and capacity constraint52
An efficient physically-based damage model for interface damage of composites sleeved interference joint and influence analysis of its interface friction52
Editorial Board52
Uncertainty quantification of pure and mixed mode interlaminar fracture of fibre-reinforced composites via a stochastic reduced order model52
Interlaminar fracture of asymmetrically delaminated specimens: Beam modelling and noteworthy characteristics52
3D winding path modeling on truncated conical shell with proposed outer-contour expanding and convex helix algorithms51
Weak form quadrature element analysis of spatial geometrically exact composite beams with torsional warping51
An efficient model for predicting complex delamination front of elastic coupling laminates51
Editorial Board51
A theoretical homogenized constitutive model formulation for matrix composite materials reinforced with curved fibers51
Soft impact behavior of composite I-beams51
A mixed finite element model for FRP-strengthened RC slabs based on sequential linear analysis51
3D macro-mechanical FE simulation for GLARE® drilling with experimental validation51
Numerical homogenization with FFT method for elastic composites with spring-type interfaces51
Buckling capacity of composite panels with cutouts using continuous curvilinear fibres and stiffeners based on streamlines51
Elastic shakedown analysis of two-dimensional thermo-elastic rolling/sliding contact for a functionally graded coating/substrate structure with arbitrarily varying thermo-elastic properties51
Implementation of shear-locking-free triangular refined zigzag element for structural analysis of multilayered plates with curvilinear fibers51
A topology optimization framework for 3D phononic crystals via the method of successive iteration of analysis and design50
Editorial Board50
Novel pulse compression favorable excitation schemes for infrared non-destructive testing and evaluation of glass fibre reinforced polymer materials50
Numerical homogenization of fiber reinforced layer in large elastic deformation using a decoupled iterative method50
Editorial Board50
Study on retrofitting of existing reinforced concrete buildings with the exoskeleton design-U-frame method49
Propagation characteristics of electromagnetic field penetrated into laminated CFRPs using eddy current testing with pancake coil49
Editorial Board49
Numerical frequency and SERR response of damaged (crack/delamination) multilayered composite under themomechanical loading: An experimental verification49
The structural behaviour of moulded gratings made of glass fibre reinforced plastics49
Editorial Board49
Quasi-3D theory for the vibration and deflection of a magnetostrictive composite plate resting on a viscoelastic medium49
On direct weight inverse approach for identifying composite parameters based on two-way TrumpetNets49
Editorial Board49
Wet collapse mechanism of steel-reinforced flexible pipe structures under curvature effect: Physical experimentation and numerical simulation49
An innovative multi-layer shell model for in-pile thermo-mechanical behavior analysis of plate-type fuel assemblies49
A numerical study on stress wave propagation in quasi-isotropic stacks of Dyneema® compliant composite laminates48
Axial mechanical properties and robust optimization of foam-filled hierarchical structures48
Robust 3D-trapezoid composite fabric withstanding repeat impact/compression for personal protection48
Monotonic and cyclic compression behavior of axially loaded FRP-confined concrete-encased cross-shaped steel columns48
Quasi-numerical model for predicting the elastic moduli of matrix composites48
Effective elastic properties of biocomposites using 3D computational homogenization and X-ray microcomputed tomography48
Nonlinear vibration analysis of CFRP spherical shell panel under hygrothermal effects48
Comparison of local, gradient-enhanced and integral form of continuum damage approaches to strain localization in fiber reinforced composites48
Multi-scale dispersive gradient elasticity model with rotation for the particulate composite48
Editorial Board48
Design and structural responses of a 38-meter sectional wind turbine blade under extreme static loads48
Editorial Board48
A novel method for investigating the isotropy of response for randomly generated unit cells of particulate composites48
Halo approach to model cracks initiation and propagation in 3D Discrete Element Method simulation of homogeneous and heterogeneous materials47
Buckling behaviour of GFRP cylindrical shells subjected to axial compression load47
Fuzzy logic based active vibration control using novel photostrictive composites47
Editorial Board47
Forced resonance vibration analysis in advanced polymeric nanocomposite plate surrounded by an elastic medium47
Study of post-impact behaviour of thin hybrid carbon/epoxy and glass/epoxy woven composite laminates under fatigue tensile loading – Part I : Experimental study47
A two-dimensional model to analyze the static and dynamic mechanical behavior of multilayered shell structures47
A linear finite element for timber–concrete layered beams with interlayer slip47
Finite volume based asymptotic homogenization of viscoelastic unidirectional composites47
Determining equivalent-sectional shear modulus in torsion tests for laminated glass beams using photogrammetry method47
Editorial Board47
Distribution and propagation of matrix cracks within composite laminates under impact46
The mechanics and optimal design of micro-architectured stepped hexagonal lattices46
Stochastic prediction of natural frequencies of laminated composite beams by using a high-order statistical moment based approach46
Practical application of multi-material topology optimization to performance-based architectural design of an iconic building46
On the nonlinear dynamics of porous composite nanobeams connected with fullerenes46
Modelling flexural performance of hollow pultruded FRP profiles46
On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses46
Editorial Board46
Higher order interface conditions for piezoelectric spherical hollow composites: asymptotic approach and transfer matrix homogenization method45
In-Plane mechanical and failure responses of honeycombs with syntactic foam cell walls45
Experiment study of basalt fiber/steel hybrid laminates under high-velocity impact performance by projectiles45
Microstructure-based deformation and fracture modeling of particulate reinforced composites with ordinary state-based peridynamic theory45
Forced and free vibration of magnetostrictive laminated sandwich beams on Kerr’s foundations45
Thermo-elastic damped nonlinear dynamic response of the initially stressed hybrid GPL/CNT/fiber/polymer composite toroidal shells surrounded by elastic foundation45
A general boundary layer corrector for the asymptotic homogenization of elastic linear composite structures45
A carbon fiber lamina electrode based on macroporous epoxy with vertical ion channels for structural battery composites45
Experimental parametric investigation on the behavior of adhesively bonded CFRP/steel joints45
FE modeling of Non-circular LRS FRP-confined concrete columns45
Development of an objective model to predict shear capacity of FRP U-wrap anchors45
Free vibration and buckling of bidirectional functionally graded sandwich beams using an enriched third-order shear deformation beam element45
Higher order theories for the vibration study of doubly-curved anisotropic shells with a variable thickness and isogeometric mapped geometry44
An integrated inverse numerical–experimental approach to determine the dynamic Mode-I interlaminar fracture toughness of fibre composites44
Silkworm cocoon-inspired and robust nanofibrous composite separator with gradient structure for lithium ion batteries44
Characterization and prediction of tensile properties of carbon fiber-reinforced thermoplastics composed of hybrid short carbon fiber/PA6 fiber nonwoven mats44
Experimental and numerical investigations on the mode I delamination growth behavior of laminated composites with different z-pin fiber reinforcements44
Failure analysis of CF/epoxy hollow beam components using digital image correlation and acoustic emission analyses44
Compressive damage and heat release of composite laminate with circular prefabricated defect, part II-numerical method44
Reconfigurable magneto-mechanical metamaterials guided by magnetic fields44
Flexible composite structure with customizable in-plane Poisson’s ratio under large deformation44
The effect of load eccentricity on the compressed CFRP Z-shaped columns in the weak post-critical state44
Dynamic compressive behavior of concrete confined with unidirectional natural flax FRP based on SHPB tests43
Hygrothermal durability of epoxy adhesives used in civil structural applications43
Fatigue delamination damage analysis in composite materials through a rule of mixtures approach43
Experimental and numerical analysis of CFRP-SPCC hybrid laminates for automotive and structural applications with cost analysis assessment43
Damping behavior of plant fiber composites: A review43
Quasi-static puncture resistance behaviors of architectural coated fabric43
Durability of fibre-reinforced polymer-wood composite members: An overview43
Multiscale study on compressive failure mechanism of plain woven composites considering stochastic waviness defects43
Sensors integration for structural health monitoring in composite pressure vessels: A review43
Axial impact behavior of Large-Rupture-Strain (LRS) fiber reinforced polymer (FRP)-confined concrete cylinders43
A novel mixed finite element formulation based on the refined zigzag theory for the stress analysis of laminated composite plates43
A comprehensive review on mechanical properties and damage mechanisms of 3DWCs under various influencing factors43
Multi-objective optimization for a composite pressure vessel with unequal polar openings43
Residual compressive section capacity of filament wound carbon, glass, and basalt fibre-reinforced polymer tubes: Influence of elevated temperatures42
Deformation of rectangular orthotropic laminate resting on thin elastic foundation with nonlinear change of displacements over thickness under edge loading42
Multiscale mechanical analysis of 3D nanoparticle-reinforced metal-based composites considering interface effects42
Compressive damage and heat release of composite laminate with circular prefabricated defect, part I-experimental method42
Interactive inverse design of periodic non-uniform/inhomogeneous rod structures based on q-learning method42
Technological peculiarities of strengthening RC members with prestressed FRP laminates42
Buckling and dynamic responses of 3D printed nanocomposites and their graded variants41
Numerical modeling for viscoelastic sandwich smart structures bonded with piezoelectric materials41
Modulation of complex permittivity of carbon nanotubes/epoxy foam composites reinforced by three-dimensional woven spacer fabric41
Experimental behavior of masonry infilled RC frames with openings strengthened by using CFRP strip41
Numerical interpretation and experimental investigation of enhanced magnetoelectric effect in Ni/PZT distributed disc structured composite41
Woven ceramic matrix composite surrogate model based on physics-informed recurrent neural network41
A new and efficient zigzag theory for laminated composite plates41
Theory of dynamic mode-II delamination in end-notched flexure tests41
A mode localization inspired vibration control method based on the axially functionally graded design for beam structures41
A consistent energy-based cohesive zone model to simulate delamination between differently oriented plies41
An analytical model to predict the impact of a bullet on ultra-high molecular weight polyethylene composite laminates41
Assessing stiffness degradation of stiffened composite panels in post-buckling compression-compression fatigue using guided waves41
Parametric analyses on multiscale elastic behavior of 3D braided composites with pore defects41
An elastoplastic mechanical-thermal model for temperature rise simulation of two-dimensional triaxially braided composites under quasi-static loads41
Energy absorption prediction for lattice structure based on D2 shape distribution and machine learning41
Multiscale analysis on the anisotropic thermal conduction of laminated fabrics by finite element method41
Experimental and numerical studies on influence of impact damage and simple bolt repair on compressive failure of composite laminates41
Analytical study of the bond behavior of fiber reinforced cementitious matrix (FRCM)-substrate joints based on a two-stage nonlinear cohesive material law41
Microstructural modeling on electrical conductivities of 3-D carbon/epoxy woven composites along different directions40
Vibration of FG-CNT and FG-GNP sandwich composite coupled Conical-Cylindrical-Conical shell40
Experimental and numerical failure analysis of thin-walled composite plates using progressive failure analysis40
Nonlinear magnetic-mechanical-thermo-electric coupling characteristic analysis on the coupled extensional and flexural vibration of flexoelectric energy nanoharvester with surface effect40
Effects of resin pre-coating treatment and fibre reinforcement on adhesive bonding between CFRP sheet and concrete40
Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites40
Material parameter optimization of flax/epoxy composite laminates under low-velocity impact40
An improved calibration method of the K&C model for modeling steel-fiber reinforced concrete40
An anisotropic localizing gradient damage approach for failure analysis of fiber reinforced composites40
Cornering stiffness characteristics of honeycomb wheels: A parametric analysis using response surface method40
Experimental evaluation of variable thickness 3D printing of continuous carbon fiber-reinforced composites40
0.081368923187256