Chinese Journal of Polymer Science

Papers
(The TQCC of Chinese Journal of Polymer Science is 9. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-12-01 to 2025-12-01.)
ArticleCitations
Research on the Dynamic Compressibility of Polyurethane Microcellular Elastomer and its Application for Impact Resistance207
Controllable Ring-opening Polymerization of δ-Valerolactone Catalyzed by Quinolinyl-Urea/MTBD Systems154
Cellulose Nanocrystals-mediated Phase Morphology of PLLA/TPU Blends for 3D Printing106
Facile Synthesis of Polycarbonate Diol via Copolymerization of CO2 and Cyclohexene Oxide Catalysed by a Combination of One-Component Phosphonium Borane Lewis Pair and Water77
Design of Weldable and Recyclable Fluorine-containing Adhesives Utilizing Dynamic-covalent Boroxine Bonds66
Liquid Crystalline Hydrogel Capable of Thermally-induced Dual Actuation58
Design of Biologically Active Macromolecular Ligands and Their Luminescent Complexes with Terbium Ions54
Experimental and Numerical Investigations of Carbon-based Nanoparticle Reinforcement on Microstructure and Mechanical Properties of Epoxy Coatings52
Highly Efficient and Thermal Robust Cobalt Complexes for 1,3-Butadiene Polymerization38
An ROS-Responsive Antioxidative Macromolecular Prodrug of Caffeate for Uveitis Treatment33
Effects of Solvent Qualities on the Conformation of a Homopolymer Chain in Binary Mixed Solvents32
Depolymerization and Functionalization of Super Engineering Plastics31
A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances31
Enhanced Crystallization of Poly(butylene adipate-co-terephthalate) by a Self-assembly Nucleating Agent31
Unleashing the Power of Bio-based Thermotropic Liquid Crystal Modifiers: Toughening and Reinforcing Petroleum-based Epoxy Resin without Compromising Other Properties30
Spherical Polyelectrolyte Brush Nanoreactor: Preparation of Hollow TiO2 Nanospheres and Characterization by Small Angle X-Ray Scattering30
Phase Patterning of Poly(oxime-ester) for Information Encryption by Photo-induced Isomerization29
Robust Composite Separator Randomly Interwoven by PI and Pre-oxidized PAN Nanofibers for High Performance Lithium-ion Batteries26
Biobased Polyesters Derived from 2-Methoxyhydroquinone: Impact of Cyclic and Alkyl Chain Segments on Their Thermomechanical Properties, Biodegradability, and Ecotoxicity26
Construction of Safety and Non-flammable Polyimide Separator Containing Carboxyl Groups for Advanced Fast Charing Lithium-ion Batteries26
AI-driven Automated Construction of Block Copolymer Phase Diagrams25
Advances in Surface Materials for Resisting Snow and Freezing Disasters24
Olefin Polymerization Behavior of Titanium(IV) Complexes with Fluorinated and Non-fluorinated Aliphatic Phenoxyimine Ligands24
Phenylimino-pyridine-phenolate Zinc Complexes for Polylactide Synthesis and Chemical Recycling to Monomers24
Non-linear Radical Additions-Coupling Polymerization of Monovinyl Monomers towards Polymer Networks: Theory, Tunability and Heritable Architecture23
Surface Polarization Effects on Collapse Transition of Polyelectrolyte Brushes23
Copper-coated Porous Polyimide as Ultralight and Safe Current Collectors for Advanced LIBs22
Synthesis of Helical Poly(phenylacetylene)s Carrying Dendritic Pendants with Varied Branching Densities Through Polymerization in Different Solvents22
Erratum to “Phase Separation of Polymer Blends Induced by an External Static Electric Field”22
Topological Design of Low Dielectric Ladder-like Polysilsesquioxane and Copolymers22
Recent Advances in Asymmetric Structural Composites for Excellent Electromagnetic Interference Shielding: A Review21
Polydimethylsiloxane-based Antifouling Polymers with Tunable Self-healing Properties in Aqueous Environments21
Fluorinated Colorless Polyimides with High Heat-resistance and Low Birefringence21
Memory Effect of Crystallization in 1-Butene/α-olefin Copolymers21
Facile Fabrication of Hyperbranched Polyacetal Quaternary Ammonium with pH-Responsive curcumin Release for Synergistic Antibacterial Activity21
Sunlight-induced Permanent Hair Dyeing20
Perforation Dynamics and Directional Motion of Janus Vesicles under the Coupled Effects of Flow and Electric Fields20
Phosphine/Benzocyclone-based Neutral Nickel Catalysts for Ethylene Polymerization and Copolymerization with Polar Monomers20
Influence of Hydrogen Bonding on the Temperature-Accelerated Hydrolysis of Silicone Based Polyetherurethane20
Fiber Bending Flexibility Evaluation by Worm-like Chain Model19
Electrostatic Encapsulation of Cobalt Ions into Crystalline Framework Derived Polymer Aerogel: Ultra-light, Pressure Resistant, Hydrophobic, Photothermal Conversion, Heat Insulation and Infrared Steal19
Fibrous Separator with Surface Modification and Micro-Nano Fibers Lamination Enabling Fast Ion Transport for Lithium-Ion Batteries19
Copolymerization of PO/CO2 and Lactide by a Dinuclear Salen-Cr(III) Complex: Gradient and Random Copolymers with Modificable Microstructure19
Polar Phase Formation and Piezoelectricity of PVDF by Hot-pressing under Electrostatic Intermolecular Interactions19
Special Topic: Depolymerizable Polymers19
Role of Stretching-induced Crystallization on Mesoscale Morphology Transition of UHMWPE during Hot Stretching19
Ring-closing-opening Copolymerization of Phthalaldehyde and Epoxide towards Acid-degradable Polyether and Polyurethane19
OpenPoly: A Polymer Database Empowering Benchmarking and Multi-property Predictions18
High Impact Polylactide Based on Organosilicon Nucleation Agent18
Block Copolymer Aided Controllable Design of Colloidal Molecules by DNA-programmable Assembly18
AI-driven Inverse Design of High-performance Viscosity Modifiers18
Shear-induced Precursors of Fibrillar Crystals of Poly(butene-1): A Rheological Study18
Multistimuli Responsive and Thermoregulated Capability of Coaxial Electrospun Membranes with Core-sheath Structure and Functional Polypyrrole Layer18
A Study on the Impact of Chemical Structure on the Evolution of Aggregate Structure in Fiber-shaped High Density Polyethylene Vitrimer18
Based on the Second Virial Coefficient (A2) to Study Effect of the Synergistic Action of Solvent and External Electric Field on the Solution Behavior and Film’s Condensed State Structure17
Recent Research Progress of n-Type Conjugated Polymer Acceptors and All-Polymer Solar Cells17
Seamlessly-integrated Textile Electric Circuit Enabled by Self-connecting Interwoven Points17
Special Issue: Organic Photovoltaic Polymers17
Crystallization Properties, Heat Resistance, and Hydrolytic Resistance of Poly(L-lactide)/Poly(D-lactide) Blend Enhanced by In situ Formation of Stereocomplex Polylactide17
Construction of Magnetic Resonance Imaging Visible Polymeric Vector for Efficient Tumor Targeted siRNA Delivery17
Recyclable and Self-healable Polydimethylsiloxane Elastomers Based on Knoevenagel Condensation17
Tough Hydrogen Bonding Crosslinked Poly(3-fluorothiophene) Network via Electrosynthesis for High-performance Electrochromic Supercapacitors17
Synergistic Effect of Multi-Arm Architecture and Molecular Weight on Crystallization and Degradation Behavior of Star-Shaped Poly(Lactic Acid)17
Ring-opening Polymerization of 2-Oxabicyclo[2.2.2]octan-3-one and the Influence of Stereochemistry on the Thermal Properties of the Polyesters16
Unraveling the Heterogeneity of Epoxy-amine Networks by Introducing Dynamic Covalent Bonds16
Controllable Preparation of Branched Polyolefins with Various Microstructural Units via Chain-walking Ethylene and Pentene Polymerizations16
High Humidity-resistant and Reversible Mechanochromic Wrinkling Surface Activated by Dual Mechanical Modes16
Strain-induced Stereocomplex Formation from the Initially Amorphous Poly(L-lactic acid)/Poly(D-lactic acid) Samples16
Preparation and Hydrogenation of Dicyclopentadiene-based Cyclic Olefin Copolymers16
A Single-dose Vaccine Using Ultrasound-responsive Hydrogel for Controlled Antigen Release and Enhanced Immunization Efficacy16
A Holistic View of Polymer Aggregate16
Topological Structure Evolution of Polymer Network Based on Star-shaped Multi-armed Precursors16
Experimental and Data Fitting Guidelines for the Determination of Polymer Crystallization Kinetics15
Size and Dynamics of Ring Polymers under Different Topological Constraints15
Fabrication of Functional Biobased Epoxy Coatings via Cinnamic Acid Grafting: Synergistic Antibacterial, Antifouling, UV-resistant, and Superhydrophobic Properties15
Asymmetric Catalytic Polymerization: Advances and Challenges15
Brominated Butyl Rubber Anticorrosive Coating and its Self-healing Behaviors15
Glucose-sensitive Membrane with PBA-based Contraction-type Linear Polymer as Chemical Valves Prepared by Surface Grafting15
Fabrication of Modified Fibrous Filters by Electrospinning and Investigating Their Application as Improved Face Masks15
Tunable Thermo-Responsive Shape Memory Materials Enabled by Poly(ε-caprolactone)-Poly(2-vinyl)ethylene Glycol Copolymers via Facile Thiol-Ene Photo-Crosslink15
Engineering Antibacterial Activities and Biocompatibility of Hyperbranched Lysine-based Random Copolymers15
A Macroporous Cryogel with Enhanced Mechanical Properties for Osteochondral Regeneration In vivo15
Temperature-sensitive Micelles as Artificial Chaperones for Insulin Protection15
Cooperative Supramolecular Polymerization of Propeller-Shaped Triphenylamine Cyanostilbenes for Explosive Detection14
Hyperbranched Polymeric Fluorosurfactants: Synthesis, Surface Activity and Their Application in Firefighting Foams14
Universal Concentration Scaling on Rheometric Properties of Polydisperse and High Molecular Weight Polyacrylamide Aqueous Solutions14
Facile Preparation of Super-strong and Tough Poly(vinyl alcohol)/Carbon Nanotube Hydrogel Enabled by Triple Crosslinking Networks14
High-performance Vanillin-derived Dielectric Polymer Films for Sustainable Energy Storage14
Tube Model for Complex Polymer Knots14
A Dielectric Ink Combining Acrylate and Cyanate Moieties for Inkjet 3D Printing with Good Thermal Stability14
Revealing the Unusual Efficiency Enhancement of Organic Solar Cells with Polymer-Donor-Treated Cathode Contacts14
Preparation of PVA/GO/h-BN Janus Film with High Thermal Conductivity and Excellent Flexibility via a Density Deposition Self-assembly Method14
Unidirectional Pre-stretching and Isothermal Annealing Reinforced Poly(butylene carbonate) Sheets at Room Temperature14
The Effect of In situ Melt Pre-shear Induced Oriented Precursors on the Crystallization of Poly(1-butene)/Polypropylene Blends14
Pendant Y-series Acceptors with Well-controlled Morphology Enabled High Performance and Stability All-polymer Solar Cells13
Promoted Comprehensive Properties of Polyisoprene Rubber with Extremely High Fatigue Resistance Enabled by Oligopeptide Aggregates13
Chemical Recycling of Poly(ethylene furanoate) into Value-added Poly(ethylene-co)-isosorbide furanoate)13
Experimental and Theoretical Study on Piezoresistive Behavior of Compressible Melamine Sponge Modified by Carbon-based Fillers13
Precise Supramolecular Polymerization of Liquid Crystalline Block Copolymer Initiated by Heavy Metallic Salts13
Study on Catalytic Behavior of Iron-based Catalyst with IITP as Electron Donor in the Polymerization of Butadiene13
Molecular Dynamics Simulation Studies on the Micromorphology and Proton Transport of Nafion/Ti3C2Tx Composite Membrane13
Comparative Study of Intrachain versus Interchain Cross-linking on the Mechanical, Thermal and Dielectric Properties of Low-k Polyimide13
Translocation of ssDNA through Charged Graphene Nanopores: Effect of the Charge Density13
Distinctive Polymorphism-like Isodimorphism in Poly(propylene succinate-ran-propylene fumarate)13
Microphase Separation of Semiflexible Ring Diblock Copolymers13
Photonic Fibrous Liquid Crystal Elastomer Actuators13
Dielectric Constant Calculation of Poly(vinylidene fluoride) Based on Finite Field and Density Functional Theory13
Prussian Blue/Cellulose Acetate Thin Film Composite Nanofiltration Membrane for Molecular Sieving and Catalytic Fouling Resistance13
Study on the Radiation Synthesis Mechanism and the Electrochemical Property of Polyaniline13
Surface and Interface Engineering for Advanced Nanofiltration Membranes13
Designs to Improve Capability of Neural Networks to Make Structural Predictions12
Tuning the Stability of the Polyplex Nanovesicles of Oligonucleotides via a Zinc (II)-Coordinative Strategy12
Preparation and Structure-Property Regulation Mechanism of Reversible Thermochromic Polydiacetylene12
Rational Design and Fabrication of Cyclotetrasiloxane-based Hybrid Superhydrophobic Fabrics for Oil/Water Separation and Self-cleaning12
Interfacial Chain Entanglements Induced Melt Memory Effect in Poly(ε-caprolactone)/Silica Nanocomposites12
Superior Ductile and High-barrier Poly(lactic acid) Films by Constructing Oriented Nanocrystals as Efficient Reinforcement of Chain Entanglement Network and Promising Barrier Wall12
Smart Core-Shell Elastomer Fibers with Simultaneous Resistance and Color Responses12
Effect of Carbon Particles with Different Topological Shape on the Rheological Behavior of PVA Aqueous Dispersion12
Construction of Aniline Trimer Based Conjugated Polymers through Schiff Base Reaction and Their Use as Feedstock for Infrared Stealth Coatings12
Numerical Analysis of PRISM-PY Calculations for Hard- and Soft-Core Generic Polymer Models12
Electrically Detaching Behavior and Mechanism of Ionic Conductive Adhesives12
Unconventional 2D Periodic Nanopatterns Based on Block Molecules12
Regulating Actuations and Shapes of Liquid Crystal Elastomers through Combining Dynamic Covalent Bonds with Cooling-Rate-Mediated Control12
Effect of Molecular Weight Selection and Relative Humidity on the Moisture Absorption and Desorption Behavior of Poly(N-isopropylacrylamide)-based Hydrogels12
One-step Preparation of Brush-type Polystyrene (PS)-SiO2-Poly(2-hydroxyethyl methacrylate) Janus Nanoparticle to Compatibilize PS/Poly(methyl methacrylate) Blends12
Luminescent Composite Films Based on Mechanically Strong Ladder-like Polyphenylsilsesquioxane and Oligophenyleuropiumsiloxane12
Unconventional Fluorescent and Multi-responsive Polysiloxane: Synthesis, Characterization and Biological Applications12
Properties of Multiblock Sulfonated Poly(arylene ether sulfone)s Synthesized by Precise Controllable Post-sulfonation for Proton Exchange Membranes12
Chain Flexibility and Connectivity: The Uniqueness of Polymer Crystallization12
Research on Bast Fiber Extracted from the White Bark of Three Species in the Genus Broussonetia12
Random Terpolymer Based on Simple Siloxane-functionalized Thiophene Unit Enabling High-performance Non-fullerene Organic Solar Cells12
The New Methods for Characterization of Molecular Weight of Supramolecular Polymers12
Elongational Flow-induced Crystallization of Poly(L-lactic acid) Telechelic Ionomers11
Nature-Inspired pH-Responsive Hydrogels with Rapid and High Contrast Changes in Color, Fluorescence, and Shape Simultaneously11
Vanadium(V) Complexes Containing Unsymmetrical N-Heterocyclic Carbene Ligands: Highly Efficient Synthesis and Catalytic Behavior towards Ethylene/Propylene Copolymerization11
Precise Pentamers with Diverse Monomer Sequences and Their Thermal Properties11
Topological Catenation Enhances Elastic Modulus of Single Linear Polycatenane11
Molecular Designs of Sulfur-containing High Refractive Index and Abbe Number Polymers Using Density Functional Theory11
Special Topic on AI for Polymers11
Research on Improving the Thermal Conductivity of Epoxy Resin with Flexible Assisted Rigid Groups11
Meniscus-Assisted Solution Printing Enables Cocrystallization in Poly(3-alkylthiophene)-based Blends for Field-Effect Transistors11
Thiazole-Flanked Thiazoloisoindigo as a Monomer for Balanced Ambipolar Polymeric Field-effect Transistors11
A Self-Healing Elastomer with Extremely High Toughness Achieved by Acylsemicarbazide Hydrogen Bonding and Cu2+-Neocuproine Coordination Interactions11
New Kinetics Equation for Stress Relaxation of Semi-crystalline Polymers below Glass Transition Temperature11
Robust Poly(glycolic acid) Films with Crystal Orientation and Reinforcement of Chain Entanglement Network11
3-Methylcyclohexanone Processed n-Channel Organic Thin-Film Transistors Based on A Conjugated Polymer Synthesized by Direct Arylation Polycondensation11
Transition-Metal-Free Multicomponent Polyannulations of Dimethyl Sulfoxide, Amines, and Aldehydes toward Poly(phenylquinoline)s11
Key Physicochemical Properties and Service Characteristics of Low Dielectric Polyimide-based Nanocomposites11
Cephalopods-inspired Repairable MWCNTs/PDMS Conductive Elastomers for Sensitive Strain Sensor11
Stretching Elasticity and Flexibility of Single Polyformaldehyde Chain11
Corrugated Graphene Paper Reinforced Silicone Resin Composite for Efficient Interface Thermal Management11
A Simple-Prepared and Multi-Reusable Adhesive Based on Epoxy Vitrimer11
Dynamic Crosslinked Phosphorescent Poly(vinyl alcohol)-Terpyridine Films with Enhanced Mechanical Properties and Tunable Shape Memory11
Sequence-Controlled Synthesis of Alternating Poly(ester amide)s using Water as Control Agent in One-Pot11
Spherical Magnetic Fe-Alginate Microgels Fabricated by Droplet-Microfluidics Combining with an External Crosslinking Approach and the Study of Their pH Dependent Fe3+ Release Behaviors11
Facile and Cost-Efficient Synthesis of Photovoltaic Polymers via Direct Arylation Coupling11
Editorial11
A Strong, Tough, and Self-Healing Strengthening Thioctic Acid-based Elastomer for Highly Reliable Flexible Strain Sensor11
Enhancing Molecular Chain Entanglement and π-π Stacking Toward the Improvement of Shape Memory Performance of Polyimide11
Preparation of Chemically Recyclable Poly(ether-alt-ester) by the Ring Opening Polymerization of Cyclic Monomers Synthesized by Coupling Glycolide and Epoxides11
Thermally Induced Transferable Silk Nanofibrils-based Gas-Liquid Interfacial Films: Formation and Applications11
Critical Role of Ethylene-Propylene Block Copolymer in Impact Polypropylene Copolymer10
Catalyst-Free Four-Component Spiropolymerization for the Construction of Spirocopolymers with Tunable Photophysical Properties10
Translocation of a Self-propelled Polymer through a Narrow Pore10
Implantable Polyurethane Scaffolds Loading with PEG-Paclitaxel Conjugates for the Treatment of Glioblastoma Multiforme10
Mechanically Robust Polylactide Fibers with Super Heat Resistance via Constructing in situ Nanofibrils10
Impact of Annealing on the Melt Recrystallization of a-PDLA/α-PLLA Double-layered Films10
Advancements and Applications of 4D Bioprinting in Biomedical Science10
Detection of the Destruction Mechanism of Perfluorinated Elastomer (FFKM) Network under Thermo-oxidative Aging Conditions10
3D Printed Polyimide/Silica Composite Aerogels for Customizable Thermal Insulation from −50 °C to 1300 °C10
Light-driven Self-sustained Rolling of Cylinder Hydrogels with Fast and Anisotropic Responses10
Preparation and Rheological Characterization of Long Chain Branching Polyglycolide10
Special Issue: The Youth Innovation Promotion Association of the Chinese Academy of Sciences10
Production of Functional Materials Derived from Regenerated Silk Fibroin by Utilizing 3D Printing and Biomimetic Enzyme-induced Mineralization10
Molecular Dynamics Simulations of Stretch-Induced Crystal Changes in Crystallized Polyethylene/Carbon Nanotubes Nanocomposites10
Histidine N-Thiocarboxyanhydride: Direct Synthesis and Polymerization without Protection towards Well-defined Polyhistidine10
Porous Shish-Kebab Structure Prepared from Oriented UHMWPE Films by Processing in Supercritical CO210
Special Issue: Celebrating the 70th Anniversary of the Establishment of Polymer Program at Peking University10
Influence of Backbone and Axial Substituent of Catalyst on α-Imino-ketone Nickel Mediated Ethylene (Co)Polymerization10
Photocontrolled Solution [2+2] Polymerization of p-Phenylenediacrylate and Depolymerization10
The Influence of Various Cationic Group on Polynorbornene Based Anion Exchange Membranes with Hydrophobic Large Steric Hindrance Arylene Substituent10
Thermally Conductive Polyimide/Boron Nitride Composite Films with Improved Interfacial Compatibility Based on Modified Fillers by Polyimide Brushes9
Living Crystallization-Driven Self-Assembly of Oligo(p-phenylene vinylene)-Containing Block Copolymers: Impact of Branched Structure of Alkyl Side Chain of π-Conjugated Segment9
Regioregular Asymmetric Diketopyrrolopyrrole Copolymers with Good Molecular Ordered Assembly Ability for High-performance Polymer Transistors9
Insight into Biophysicochemical Principles of Biopolymers through Simulation and Theory9
Janus Particle Sizing Agent for Interfacial Enhancement of Basalt Fiber/Poly(vinyl chloride) Composites9
Structural Properties of Ions and Polyelectrolytes in Aqueous Solutions under External Electric Fields: The Sign Effect9
Highly Transparent and Adhesive Poly(vinylidene difluoride) Films for Self-Powered Piezoelectric Touch Sensors9
Effect of Microwave Power and Clamping Pressure on the Microwave Welding of Polypropylene Using Silicon Carbide Nanowhiskers as Microwave Susceptor9
Ni(acac)2 Mediated Vinyl Polymerization of Norbornene in the Presence of Bulky Salicylaldiminate Ligands: An Effective Strategy to Access Soluble Polynorbornenes9
Recent Progress in Donor-Acceptor Type Conjugated Polymers for Organic Field-effect Transistors9
Structure and Morphology of Poly(ε-caprolactone) Heterogeneous Shish-Kebab Structure Induced by Poly(lactic acid) Nanofibers9
Spiropyran-Containing Reusable and Wearable All-in-One Ultraviolet Monitoring and Shielding Textiles for Sun Protection9
Understand the Temperature Sensing Behavior of Solid-state Polymerized PEDOT Hybrid Based on X-ray Scattering Studies9
Upcycling of Poly(butylene adipate-co-terephthalate) into Dual Covalent Adaptable Networks through Chain Breaking-Crosslinking Strategy9
Programming Shape-Morphing Behavior of Zwitterionic Polymer/Liquid Crystal Composite with Humidity-responsive Self-healing Performance9
Molecular Simulations in Macromolecular Science9
Trends in Sequence-Defined Polyelectrolyte Systems: A Perspective9
Asymmetric Mesoporous Carbon Microparticles by 3D-Confined Self-Assembly of Block Copolymer/Homopolymer Blends and Selective Carbonization9
Optimization of Extrusion-based Silicone Additive Manufacturing Process Parameters Based on Improved Kernel Extreme Learning Machine9
Biomedical Polymers—Escort for Human Health9
A Unified Approach to Phase Equilibria in Multi-component Polymer Systems with Effective Chemical Potential9
A Biosurfactant-containing TSD Strategy to Modify Bovine Pericardial Bioprosthetic Valves for Anticalcification9
Decreasing the CTE of Thermoplastic Polyimide by Blending with a Thermosetting System9
Recyclable and Degradable Poly(p-dioxanone)-based Copolymer with Enhanced Mechanical Properties by Microphase-separated Interface Crystallization9
0.36325216293335