Korean Journal of Chemical Engineering

Article	Citations
Prediction of gas holdup in various types of airlift reactors	119
Numerical simulation of thermal performance of bionic waste heat utilization equipment filled with nanofluids	75
Sorption thermodynamics and coupling effect for pervaporative dehydration of acetone through nanoclay and iron nanoparticle-filled copolymer membranes	58
Enhancing the electrical conductivity of stretchable silicone composite textiles using ethanol solvent treatment	54
Process modeling and design of reverse osmosis membrane system for seawater desalination	50
Experimental study rheological behavior of MWCNT (10%)-TiO2 (90%)/SAE40 hybrid nano-lubricants (HNLs) post-processing of the results with response surface methodology (RSM)	46
Biomass Oxidation in Direct Biomass Redox Flow Fuel Cell: The Roles of Catalysts, Redox Couples, Mediators and Oxidants	38
Leaching Behavior of the Main Metals of Decopperized Anode Slime	38
Eco-friendly Fabrication of Perovskite Solar Cells: From Material Engineering to Recycling	36
Correction to: Efficient dual adsorption of eosin Y and methylene blue from aqueous solution using nanocomposite of graphene oxide nanosheets and ZnO nanospheres	35
CO2-Utilization Facilitated by Solid Reaction Mediums—A Review	32
Photothermal Water Evaporation via Hollow-CuS Embedded PDMS Sponge Under UV, Visible, and IR Irradiation	31
Self-Assembled Monolayers as Hole-Selective Contacts in Inverted Perovskite Solar Cells: A Review	30
High-Efficiency Biocatalytic Production of Androsta-1,4-diene-3,17-dione via a Dual-Enzyme Coupling System in Escherichia coli	30
High potential of amine rice husk magnetic biocomposites for Cu(II) ion adsorption and heterogeneous degradation of contaminants in aqueous solution	29
Fluorescence-activated cell sorting-mediated directed evolution of Wickerhamomyces ciferrii for enhanced production of tetraacetyl phytosphingosine	29
Three-step short-time temperature-programmed hydrothermal synthesis of ZSM-5 with high durability for conversion of methanol to propylene	29
Hydrogen production by catalytic steam reforming of waste cooking oil over La-Ni/ZSM-5 catalyst	29
Rationalizing the Efficiency of HKUST-1 for Capture and Biomimetic Sequestration of CO2	28
Highly durable spray-coated superhydrophobic surface: Pre-anodizing and fatty acid chain length effect	28
Objectives, challenges, and prospects of batch processes: Arising from injection molding applications	28
Development of real time responding hydrogen fueling protocol and its risk assessment	27
Biodiesel production from waste cooking oil employing natural bentonite supported heterogeneous catalyst: Waste to biodiesel	26
Preparation of N-Enriched GO Adsorbents and Their Properties for Selective CO2 Capture	26
Electrochemical study for simultaneous detection of procaine hydrochloride and its metabolite in biological samples using a nanostructured strong sensor	26

Optimization of Hydrothermal Synthesis of Nickel Oxide with Flower-Like Structure	26
Effects of surface silylation on dye removal performance of mesoporous promoted titania-silica nanocomposite	25
Recent Development on Photocatalysts and Membrane Processes for Photoreduction of CO2 into C1 Solar Fuels	25
A new ternary mixed-matrix membrane (PEBAX/PEG/MgO) to enhance CO2/CH4 and CO2/N2 separation efficiency	25
Large-Scale Batch (1 m2) Production and Mechanical Assessment of Mushroom Mycelium Mats	24
Experimental study on CO2 bubble dynamics under different solution viscosity and absorbent concentration	24
Industrial symbiosis: Boron waste valorization through CO2 utilization	24
Review of Small Modular Reactors: Challenges in Safety and Economy to Success	23
Quantitative Risk Assessment of a Liquid Organic Hydrogen Carriers-Based Hydrogen Refueling Station	23
Production of Glycerol-Free Biodiesel Using Pollen-Derived CaO Heterogeneous Catalyst	22
Valorization of Corncob as a Sustainable Feedstock for Lactic Acid Production via Improved Biomass-to-Glucose Conversion Based on KOH Pretreatment	22
Negative pressure cavitation fractional precipitation for the purification of paclitaxel from Taxus chinensis	22
Hydrothermal Synthesis of Fe-Doped Nickel Cobalt Phosphate Nanofibers for High-Stability Electrochemical Overall Water Splitting	22
Bio-base Metal Organic Frameworks as Potential CO2 Adsorbents	22
Non-chromatographic Method for the Purification of High-Purity Paclitaxel from Taxus chinensis Using Tandem Cavitation Fractional Precipitation	21
Upscaled Catalytic Production of Renewable Biofuels from Hexanoic Acid	21
Exergy and Economic Analysis of Water-to-Grid Supply Chain of Hydrogen Using the Physical and Chemical Storage System	20
Effectiveness of Zeolitic Imidazolate Framework-8 (ZIF-8) Coated on Wood Blocks to Deter Termites and Optimized Concentration and Application	20
Removal of direct dyes by coagulation: Adaptability and mechanism related to the molecular structure	20
Noncatalytic Solid-State Hydrolysis of Sodium Borohydride with Sodium Metaborate Hydrate	19
AI-Based Prediction Module of Key Neutronic Characteristics to Optimize Loading Pattern for i-SMR with Flexible Operation	19
Potential organic magnetic nanoparticles from peel extract of Archidendron pauciflorum for the effective removal of cationic and anionic dyes	19
A CPFD Simulation on Hydrodynamics of Carbon Nanotube Aggregates in a Fluidized Bed	19
Co-feeding effect of municipal sludge on the pyrolysis of polyethylene terephthalate	19
One-step solvothermal synthesis of poly(arylene ether nitrile) decorated magnetic composite for methylene blue adsorption from aqueous solution	19
Paper-Based Solid-State Micro-supercapacitors Fabricated by Hydrophobic Wax Barrier Printing	18
Carbon Dots: Preparation and Their Application in Electrocatalytic Oxygen Reduction	18
Formation of Asymmetric Colloidal Multilayers via Subduction of Laterally Segregated Domains at the Air/Water Interface	18
Non-volatile and Stretchable Polyvinyl Chloride-Based Solid-State Electrolyte for Capacitive Energy Storage	18
Influence of Ag/Cu photodeposition on CaTiO3 photocatalytic activity for degradation of Rhodamine B dye	18
Controllable Preparation of Zeolite-P/Calcined Diatomite with MgCl2	18
Enhancing Radiological Emergency Response Through Agent-Based Model Case 2: Time Required for Staff Assemble	17
Compost as Green Adsorbent for the Azo Dyes: Structural Characterization and Dye Removal Mechanism	17
Recent Advances in Perovskite-Based Heterojunction Photocatalysts: Synthesis, Properties, and Applications	17
Electrical property improvement of phenolic formaldehyde resin with graphene and ionic liquid	17
Solid Polymer Electrolytes-Based Composite Cathodes for Advanced Solid-State Lithium Batteries	17
Identification of Representative Wind Power Fluctuation Patterns for Water Electrolysis Device Stress Testing: A Data Mining Approach	17
Synthesis of graphitic carbon from Pisum sativum for supercapacitor applications	17
Activated carbon (AC)-metal-organic framework (MOF) composite: Synthesis, characterization and dye removal	17
Techno-economic analysis of the integrated DME production process: Effects of different separation trains and recycling strategies	17
Modelling of Humic Acids Extraction Process Assisted by Low-Intensity Ultrasound with the Use of Three-Level Fractional Factorial Design	16
Modelling and optimization of Fenton processes through neural network and genetic algorithm	16
High throughput comparative assessment of biofilm formation of Candida glabrata on polystyrene material	16
Enhancing antifouling and separation characteristics of carbon nanofiber embedded poly ether sulfone nanofiltration membrane	16
Thermotropic liquid crystalline 4-(Nonyloxy) benzoic acid: Phase transition temperatures, thermodynamic characterization, and separation of structural isomers	16
Cost and Efficiency Optimizations of ZnO/EG Nanofluids Using Non-dominated Sorting Genetic Algorithm Coupled with a Statistical Method	16
Influence of Glass-Lined V-Shaped Stirrers on Crystallization Properties	16
Producing hydrocarbon fuel from the plastic waste: Techno-economic analysis	16
Examining the Potential of CuO/ZnBi2O4 Heterojunction Photocathode in the Photoelectrochemical Water-Splitting Applications	16
Synthesis and Property Control of Bead-Shaped Silica Adsorbents for Rhodamine B Dye Adsorption	16

Hydrodynamics of gas-liquid and biophase-gas-liquid systems in stirred tanks of different scales	15
Physics-informed deep learning for data-driven solutions of computational fluid dynamics	15
Temperature nonuniformity management in heat sinks through applying counter-flow design complex minichannels	15
Optimal strategies for supercritical gas antisolvent (GAS) coprecipitation of pyrazinamide/PVP particles via response surface methodology	15
Multi-period Deployment of Electrochemical CO2-to-CO Reduction Technology Considering Time Varying Uncertainties	15
Poly(ethylene glycol) (PEG)-based microgels embedded with magnetic nanoparticles for tannin removal and valorization	15
Solubility measurement and preparation of nanoparticles of ampicillin using subcritical water precipitation method	15
Thermodynamic, economic, as well as risk and reliability analyses of a molten carbonate fuel cell-based combined cooling, heating, and power system	15
Liquefaction of Latex Glove Waste for Volume Reduction	15
Removal of carbon residue precursor in waste plastic pyrolysis oil via oxidation	15
Recycling of Li(Ni,Co,Mn)O2 via a chlorination technique	15
Effect of cohesive particle addition on bubbling characteristics of gas-solid fluidized bed: Meso-scale mechanism	15
Economic-energy-exergy-risk (3ER) assessment of novel integrated ammonia synthesis process and modified sulfur-iodine cycle for co-production of ammonia and sulfuric acid	15
Fence Line Monitoring of Petroleum Refining Plants in Korea: UV-DOAS Analysis of SO2, NO2, and Benzene Emissions for Comprehensive Management	14
Life Cycle Assessment of Recyclable and Non-recyclable Wind Turbine Blade Materials: a Case Study of South Korea’s Offshore Wind Farm	14
Influence of different parameters on total fluoride concentration evaluation in ex-situ chemical degradation of nafion based membrane	14
Effect of non-uniform magnetic field on mixing index of a sinusoidal micromixer	14
Multi-objective optimization of a methanol synthesis process: CO2 emission vs. economics	14
Discontinuous Dewetting-Based Synthesis of Monodisperse Polydimethylsiloxane Microparticles with Tunable Aqueous Dispersibility via Surface Engineering	14
Eco-friendly inorganic-organic bionanocomposite (Copper oxide — Carboxyl methyl cellulose — Guar gum): Preparation and effective removal of dye from aqueous solution	14
Photocatalytic degradation of the organophosphorus insecticide chlorpyrifos in aqueous suspensions using a novel activated carbon ZrO2-ZnO nanocomposite under UV light	14
A Prospective Technology: Hemostasis with α-Cyanoacrylate Medical Adhesive via Electrostatic Spray Deposition Mode	14
Importance of uniformly redistributing external pressure on cycling of pouch-type Li-metal batteries	14
A 2D/2D BiPO4/g-C3N4-B Z-type heterojunction for enhanced photocatalytic degradation of dye pollutants	14
Activated carbon from municipal waste for enhanced CO2/CH4 membrane separation: Experimental, modeling and simulation	13
The modelling of fluidized bed dryer for spherical and non spherical particles	13
Desalination Performance of a Unique Capacitive Deionization Cell Optimized with ANSYS Flow Simulation	13
Facile antisolvent crystallization-based synthesis of Cu/CoO nanocomposites as catalysts for the electrochemical detection of H2O2	13
Ion-dipole complex effect on activity coefficient of L-methionine in aqueous NaCl and NaNO3 solutions	13
Time-Lapse Traces of Transformation of CdTe Nanoparticles into Nanowires via Self-Assembly	13
Effect of Surface Tension on Thermocapillary Convection-Driven Droplet Transport	13
Optimization of water-saturated superabsorbent polymers for hydrate-based gas storage	13
Facile construction of a Bi6O6(OH)3(NO3)3·1.5H2O/Bi2O2CO3 heterojunction with enhanced photocatalytic degradation activity	13
Fabrication and application of drug eluting stent for peripheral artery disease	13
Dynamic simulation and control of a triple column process for dimethyl carbonate-methanol separation	13
Novel NO removal using combined sodium erythorbate and FeIIEDTA system	13
Experimental and DFT investigations on the supramolecular mechanism of Ni(II) extraction via D2EHPA blended 1-octanol extractant: Application of vegetable oils as diluents	13
Integration of thermochemical conversion processes for waste-to-energy: A review	13
Life Cycle-Based Strategy and Feasibility of Surplus-to-X-to-Electricity on Domestic Surplus Utilization in the Republic of Korea	13
Novel silicatein-like protein for biosilica production from Amphimedon queenslandica and its use in osteogenic composite fabrication	13
Direct fabrication of graphitic carbon nitride-wrapped titanate nanotube arrays toward photoelectrochemical water oxidation in neutral medium	13
Janus Silica Nanoparticles at Three-Phase Interface of Oil–Calcite–Electrolyte Water: Molecular Dynamics Simulation	13
Microbially induced calcium precipitation based anaerobic biosynthetic crystals for removal of F− and Ca2+ in groundwater: Performance optimization, kinetics, and reactor operation	13
Iron-loaded carbon derived from separated microplastics for heterogeneous Fenton degradation of tetracycline hydrochloride	13
Modeling and optimization of dynamic viscosity of oil-based nanofluids containing alumina particles and carbon nanotubes by response surface methodology (RSM)	13
Artificial Flexible Sensory Electronics Mimicking Human Somatosensory System	12
Ionic liquid functionalized graphene oxide for the adsorption of Ca2+ and Mg2+ ions from saline aqueous feed	12
CFD Study and RSM Optimization of Acetylene Production in Partial Oxidation Process	12
Photocatalytic treatment of detergent-contaminated wastewater: A short review on current progress	12
Cellulose-type binder enabling CuCl2 supported on nanoporous bayerite to have high CO adsorption ability via reduction of Cu2+ to Cu+	12
Enhancement analysis of turbulent flow and heat transfer of supercritical CO2 in a static mixer with three helical blades	12
The electrochemical performance of lotus-root shaped meso-/macroporous TiO2 anode for lithium-ion battery	12
Synergetic Hydrogen and Methane Productions from Anaerobic Digestion of Selected Rural-Farming Plant and Animal-Based Biomass Wastes	12
Donor Numbers for Ionic Liquids and Carbonate Solvents Using 7Li and 23Na as Probes	12
Heterogeneous Catalytic Gasification of Biomass to Biofuels and Bioproducts: A Review	12
Synthesis and Electrochemical Properties of Hydrosulfide Solid Electrolytes	12
Enhanced adsorption of lead ions by enzymatically synthesized poly(m-phenylenediamine)-graphene oxide composites	12
Characteristics of Sr0.92Y0.08Ti1−xNixO3−δ anode for direct internal steam methane reforming in solid oxide fuel cells	12
Vanadium redox flow batteries including carbon catalysts derived from low-density polyethylene and polyurethane	12
Sound absorption improvement of polyurethane foam through sequential arrangement of its cellular morphology	11
Acceleration of microalgal biofilm formation on PET by surface engineering	11
Two-dimensional polymeric cobalt phthalocyanine synthesized by microwave irradiation and its use for continuous glucose monitoring	11
Phase Equilibria of Binary Mixtures of 3-Chloro-2-Hydroxypropyl Methacrylate and 2-N-Morpholinoethyl Methacrylate in Supercritical Carbon Dioxide	11
Effect of spinning parameter on the properties and performance of hollow fiber supported liquid membrane for levulinic acid extraction	11
Preparation of thermally recyclable γ-alumina nanoparticles from boehmite for adsorption of anionic dyes: Spectrophotometric study, structural characterization and industrial experience	11
Pyrolysis kinetics and thermodynamics of discarded Bakelite	11
Investigating the Impact of Methanol Concentration and Implementation of a Coefficient Diagram-Based Control System for Direct Methanol Fuel Cell Operation	11
Development of 3D CFD model of compact steam methane reforming process for standalone applications	11
Degradation mechanism of polyethylene separators in lithium-ion batteries after prolonged cycling	11
Enhancing the Performance of LiFePO4 Cathodes in Li-ion Batteries: Role of Surface Coating Based on ZIF-8 Particle Size Optimization	11
Circulation of boron resources from desalination brine through solvent extraction (TMPD/2-ethylhexanol with kerosene) and ionic-liquid extraction (ALiCy/kerosene) methods	11
Three-dimensional numerical investigation on the effect of interconnect design on the performance of internal reforming planar solid oxide fuel cell	11
Eco-friendly Chebulic Myrobalan-Derived Porous Carbon Employed as an Electrocatalyst for the Production of Hydrogen	11
Effect of slurry phase catalyst and H2 pressure on hydrocracking of SDA (solvent de-asphalting) pitch	11
Deep Learning for Green Chemistry: An AI-Enabled Pathway for Biodegradability Prediction and Organic Material Discovery	11
Hydrodynamics of co-current downward liquid-liquid system with packing	11
Investigating the Foaming Process of a Thermoplastic Elastomer (TPE) Using Rheology and Image Analysis	11
Effect of Ag loading on praseodymium doped ceria catalyst for soot oxidation activity	11
Enhanced production of biosurfactants through genetic engineering of Pseudozyma sp. SY16	11
Experimental and Simulation Insights into the Thermophysical Properties of Dibutyl Ether Mixed with n-Heptane and n-Octane	11

Preparation of N and Eu doped TiO2 using plasma in liquid process and its photocatalytic degradation activity for diclofenac	11
Dynamic behavior of an ellipsoidal bubble contaminated by surfactant near a vertical wall	11
Enhanced Photocatalytic Reduction of Carcinogenic Bromate in Water Using Self-Assembled Integration of Titanium Dioxide and Alpha-Sulfur	11
Bio-mediated Synthesis of ZnS–ZnO Nanocomposite from Cucumis melo Pulp and Chicken Feathers: Photodegradation of Dyes and Antibacterial Activities	11
Phenolic Compounds: Investigating Their Anti-Carbonic Anhydrase, Anti-Cholinesterase, Anticancer, Anticholinergic, and Antiepileptic Properties Through Molecular Docking, MM-GBSA, and Dynamics Analyse	10
Bubble behavior and nucleation site density in subcooled flow boiling using a novel method for simulating the microstructure of surface roughness	10
Photocatalytic Degradation of Rhodamine B via Fe-g-C3N4 Activated Sulfate Radical-Based Advanced Oxidation Processes and the Synergistic Mechanism	10
Multiomics characterization of dose- and time-dependent effects of ionizing radiation on human skin keratinocytes	10
Diversified component incorporated hybrid nanoflowers: A versatile material for biosensing and biomedical applications	10
Enhanced bioleaching of valuable metals from spent lithium-ion batteries using ultrasonic treatment	10
Fabrication of highly effective aramid fiber-based polypropylene composite membranes for desalination	10
Comparison and Evaluation of Marginal and Internal Gaps in Zirconia Crowns Fabricated Using Additive Manufacturing with Top-Down Approach	10
Preparation of carbonaceous monolith from polyacrylonitrile@lignin hybrid composite and its sensing and adsorption capability	10
Evaporation-Driven Three-Dimensional Supraparticle Synthesis Using Multiple Liquid-Repellent Surface Templates	10
Microkinetic study of syngas conversion to dimethyl ether over a bifunctional catalyst: CZA/FER	10
A data-based scheduling methodology for constructing hydrogen refueling stations	10
Rhodamine B dye degradation by fabricated Ti/RuO2 anode: Optimization by RSM, reaction mechanism, study of sludge	10
Structure-H Type Hydrates Containing Cyclooctane-Based Epoxy (Oxirane) Compounds	10
Facile construction of acid-resistant Au nanoclusters via hydrophobic carbon coating for catalyzing CO oxidation in acidic media	10
Deposition of Ag@AgCl onto Flower-Like BiOCl for Promoting the Degradation of Methyl Orange: The Narrow Bandgap and Surface Plasmon Resonance Effect	10
Current Progress in the Application of Artificial Intelligence for Nuclear Power Plant Operation	10
Thermophysical properties of N-isopropyl-2-propanamine+alkanol (C1-C3) mixtures as absorbents for carbon dioxide capture	10
Acid-doped polyaniline membranes for solar-driven interfacial evaporation	10
Recent progress in electrochemical reduction of CO2 into formate and C2 compounds	10
Thioanisole oxidation promoted by new niobium-based catalyst: The effect of surface hydroxyl groups on catalytic performance	10
Application of amine-loaded activated carbon fiber in CO2 capture and separation	10
A novel approach to measuring fluid saturation using X-ray computed tomography	10
Performance and cost-benefit analysis of anaerobic moving bed biofilm reactor for pretreatment of textile wastewater	10
Enhanced Porosity of Cellulose Acetate Membranes: A Comparative Study of Gas Pressure and Water Pressure Processes	10
Diffusion behavior of THO, Sr, Cs, and Am through concrete and its chemical degradation	10
Photoelectrocatalysis performance of Se doped-TiO2/Ti nanotube arrays for visible-light-driven degradation of diazinon pesticide	10
Bioelectrochemical treatment of olive oil mill wastewater using an optimized microbial electrolysis cell to produce hydrogen	10
Systematic Narrowing of ZIF-8 Apertures via Controlled 2-Ethylimidazole Doping for Hydrogen/Carbon Dioxide Separation	10
Speciation and mass distribution of mercury in a solid refuse fuels power plant	10
Drying characteristics of thermally pre-treated Cobra 26 F1 tomato slabs and applicability of Gaussian process regression-based models for the prediction of experimental kinetic data	9
Design of Experiments for Optimizing Silver–Graphene Composite as a Conductive Paste	9
Facile synthesis of polynorbornene-based binder through ROMP for silicon anode in lithium-ion batteries	9
A practical approach for kinetic analysis of hydrogenation of complex mineral base oil	9
Furfural Recovery from Kenaf Using High-Pressure CO2 for 1,4-Butanediol Production	9
Ultrasonic cavitation bubble- and gas bubble-assisted adsorption of paclitaxel from Taxus chinensis onto Sylopute	9
Synthesis and Characterization of Bimetallic ZnCo-ZIF-71 with Defect for an Efficient Catalytic CO2 Conversion	9
Process Integration and Design of Amino Acid Purification Processes for Energy Savings: An Industrial Case Study	9
Influence of Medium Concentration, Surface Properties, and Chemotaxis on Biofilm Formation of Pseudomonas aeruginosa in Microfluidic Channels	9
Implication of hydrolysis on vanadium precipitation with acidic ammonium salt from high concentration of alkaline vanadium solution	9
Green Synthesis of ZnO/αFe2O3 Nano-photocatalyst for Efficient Removal of Carbamate Pesticides in Wastewater: Optimization, Mineralization, and Financial Analysis	9
Economic Evaluation of Multi-recycling and Once-Through Fuel Cycle Considering National Plans	9
Enhanced degradation of 2,4-dichlorphenoxyacetic acid herbicide by CaO2 activated by Fe(II) and ultrasound irradiation: Practical insight and mineralization	9
Applications of Rice Husk for Adsorption of Organic Contaminant and Synthesis of Silica Nanopowder Using CO2 as Reactant	9
Atomically Dispersed Fe–N–S-Doped Carbon as an Efficient Li–S Battery Host for Capturing Polysulfides	9
Nanoparticle Doped Polymers for Radiation Shielding: A Review	9
Study in the Effect of Naphthenic Acid on the Electrocoalescence of Crude Oil Under High-Frequency Pulsed Electric Field	9
Synthesis of ternary core-shell carbon sphere@α-Fe2O3@Ag composites and their application for simultaneous voltammetric detection of uric acid, xanthine, and hypoxanthine	9
Effective interfacially polymerized polyarylester solvent resistant nanofiltration membrane from liquefied walnut shell	9
The Preparation of Na-A Zeolite Using Sludge Gasification Ash and Its Application in Cu2+ Removal from Wastewater	9
Bioprospecting of biosurfactant-producing bacteria for hydrocarbon bioremediation: Optimization and characterization	9
Heptafluoroisopropyl Methyl Ether as a Low Global Warming Potential Alternative for Plasma Etching of SiC	9
Underlying Developments in Hydrogen Production Technologies: Economic Aspects and Existent Challenges	9
Characteristics of the all-vanadium redox flow battery using ammonium metavanadate electrolyte	9
Two-phase Electrolytes for Lithium Metal Batteries	9
Preparation of NiFeCoMnCr Hydroxide on Nickel Foam by Corrosion Method and its Enhanced Electrochemical Performance in Oxygen Evolution Reaction	9
Process synthesis and optimization for the isolation and purification of paclitaxel from Taxus chinensis	9
Cytotoxic Effects of Particulate Matter on Cell Growth and Metabolism of Green Fluorescent Protein-Expressing Escherichia coli	9
Low-temperature synthesis and characterization of porous chromium terephthalate MIL-101(Cr) and its photocatalytic degradation of phenanthrene	9
Methanol Oxidation on RuO2(110): Insights from DFT and Microkinetic Modeling	9
Bio-based composite as phase change material including spent coffee grounds and beeswax paraffin	9
Development of a liquid-based cytology method for detecting cervical cancer cells using functional gold nanorods	9
Vapor-Phase Deposited Polymer Dielectric Layers for Organic Electronics: Design, Characteristics, and Applications	9
Directing battery chemistry using side-view operando optical microscopy	9
Temperature driven internal heat integration in an energy-efficient partial double annular column	9
Exergy destruction improvement of hydrogen liquefaction process considering variations in cooling water temperature	9
Optimization of Preparation Process and Property Study of BFS-based Alkali-activated Porous Thermal Insulation Materials	8
Sustainable production of acrolein over highly stable and selective WO3 over SiO2-TiO2 catalysts	8
Effect of Oxyfluorination of Activated Carbon on the Adsorption of Tetracycline from Aqueous Solutions	8
A carbon cycle optimization method for fossil and biomass energy utilization	8
Solvent-Free Dry-Process for Developing High-Performance Lithium–Sulfur Batteries	8
DEM-CFD Analysis of Fluid Flow in Packed Bed Under the Small Column-to-Particle-Diameter Ratios	8
Validation of Subway Indoor Air Quality (IAQ) Data Using Memory-Augmented Autoencoders with Learned Normal Prototypes	8
Periodate activation by concurrent utilization of UV and US for the degradation of para-nitrophenol in water: A synergistic approach	8
A Taguchi approach with electron-beam irradiation to optimize the efficiency of removing enrofloxacin from aqueous media	8
Comprehensive evaluation of high-temperature sintering behavior of sea sand vanadia-titania magnetite based on grey relational analysis	8
Improvements in Photoluminescence Efficiency and Stability of CsPbBr3 Nanocrystals Through 3-Aminopropyltriethoxysilane Treatment	8
Solubility enhancement of indigo dye through biochemical reduction and structural modification	8
The effect of enzymatic hydrolysis of pretreated wastepaper for bioethanol production	8
Solubility and crystallization of ibuprofen in the presence of solvents and antisolvents	8
Effects of Pyrolyzing and Phosphiding on Dibenzothiophene Hydrodesulfurization of MOF-Derived Ni2P	8
Analysis of diesel hydrocarbon decomposition using efficient indigenous bacterial isolate: Bacterial growth and biodegradation kinetics	8
Metal organic frameworks template-directed fabrication of rod-like hollow BiOClxBr1−x with adjustable band gap for excellent photocatalytic activity under visible light	8
Carbon Dioxide Removal by Chemically and Thermally Reduced Graphene-Based Adsorbents	8
Tailoring Atomic Metal Species for Electrochemical-Driven Urea Synthesis Coupled with CO2 and Nitrogen Sources in Aqueous Media	8
Enhancing performance of polyacrylonitrile membranes for pervaporation dehydration of ethanol by tailoring morphology and process parameters	8
Selective absorption of H2S and CO2 from simulated coke oven gas by aqueous blends of N-methyldiethanolamine and tetramethylammonium glycine	8
Hydrophobic films for optical detection of dry carbon dioxide based on ion pairing and an amine polymer	8
Fabrication & characterization of novel conductive nanomaterial, CaxCr0.5−xMg0.5Fe2O4	8
High-performance ZIF-302 mixed-matrix membranes for efficient CO2 capture	8
Enhanced Energy Storage Capacity of TiO2 Atomic Layered Molybdenum Oxide–Sulfide Negatrode for an Aqueous Ammonium Ion Supercapacitor	8