Chemical Engineering and Processing-Process Intensification

Article	Citations
Editorial Board	273
Optimization of antimicrobial properties of essential oils under rotating magnetic field	118
Hydrodynamics and wet pressure drop model based on flow regimes of the novel Flow-Divided Baffle-Bridge Tray	85
Research on the optimization of the temperature field distribution of a multi-source microwave agent system based on event-triggered	83
Optimization of effective parameters in arsenite oxidation process with Cl2, H2O2, and O3 using response surface methodology	80
Cell/particle manipulation using Bulk Acoustic Waves (BAWs) on centrifugal microfluidic platforms: A mathematical study	78
Effect of additives and electrode roughness on the production of hypochlorite sanitizer by the electrolysis of NaCl solution in a batch recycle reactor	70
Editorial Board	64
Quantification of interfacial mass transfer during droplet formation in a microfluidic T-junction using VOF	61
Editorial Board	58
Study of ultrasound, initial concentration and electrode material on the electrochemical removal of selenium and strontium	55
Non-noble metal Co@hollow carbon spheres for highly efficient one-hour phenol conversion to cyclohexanol via temperature-controlled structural engineering	53
Enhancing the extraction of germanium from zinc oxide dust through microwave roasting and the underlying mechanism	51
Ultrasonic demulsification of water-in-crude oil emulsions: Influence of rheological properties	49
Process intensification in the continuous dehydrogenation of methylcyclohexane to toluene	48
Thermal-plasma-assisted renewable hydrogen and solid carbon production from ionic liquid-based biogas upgrading: A process intensification study	46
The use of ultrasound-assisted precipitation for the production of micro-sized crystals with a narrow CSD	44
Methyl orange decolourization through hydrodynamic cavitation in high salinity solutions	44
Basil extracts obtained by green chemistry methods for cosmetic applications	44
Numerical investigations of liquid–liquid extraction through a coiled tube integrated with an extraction outlet	43
Removal of chemical oxygen demand from real petroleum refinery wastewater through a hybrid approach: Electrocoagulation and adsorption	43
Comparative performance assessment of direct contact membrane distillation with and without localized heating	42
Valorisation of glycerol with cinnamaldehyde over phosphotungstic acid encapsulated on a NaY zeolite	42
Ultrasound combined with chemical hydrolysis as a pretreatment for microencapsulation of beetroot waste by spray and freeze drying	40
An Interview with Dr. Emma Emanuelsson	40

Biodiesel production using microreactor with integrated microheater through multi-objective optimization approach	40
Enhancing biodiesel production from waste date seed oil through ultrasonic-assisted optimization: A sustainable approach using non-edible feedstocks	40
Designing rotating zigzag beds: understanding dry pressure drop under varying geometries	40
A systematic review of mathematical modeling for molecular distillation technologies	39
Numerical insights into magnetic particle enrichment and separation in an integrated droplet microfluidic system	39
Hydrodynamic and acoustic cavitation effects on properties of cellulose fibers	39
An experimental and modeling study of the application of membrane contactor reactors to methanol synthesis using pure CO2 feeds	39
Integration of photocatalytic persulfate system with nanofiltration for the treatment of textile dye at pilot scale: Statistical optimization through chemometric and ridge analysis	38
Evaluating the advantage of turbulent flow to diminish concentration polarization in Roto-dynamic RO system	38
Hydrodynamics and Energy Analysis in Suspended Catalyst Photocatalytic Membrane Reactors	38
Perspectives on the process intensification of CO2 capture and utilization	37
Ultrasound-assisted polyphenol extraction of acerola and jambolan pomaces: comparison of extraction protocols, kinetic modeling, and life cycle assessment	37
Techno-economic analysis of plastic wastes-based polygeneration processes	36
Process integration and techno-economic assessment of crystallization techniques for Na2SO4 and NaCl recovery from saline effluents	36
Overview of recent trends in microchannels for heat transfer and thermal management applications	35
Optimizing phosphoric acid concentrating using microwave technology: Theoretical and empirical model of energy efficiency and P2O5 concentration	33
Pressure drop reduction of the impeller spiral static mixer design enabled by additive manufacturing	33
Influence of discontinuous on-line ultrasonic irradiation applied in ultrafiltration MBR systems over the physical-chemical and biological characteristics of the activated sludge	32
Sodium persulfate enhances straw pretreatment and reduces NaOH dosage for biohydrogen production	32
A stochastic data-driven Bayesian optimization approach for intensified ethanol–water separation systems	32
The effect of cracks and alloy phase conditions on the hydrolysis characteristics of Al-10Bi alloy powder (composites)	32
Mathematical model and numerical simulation of pre-sulfurization of hydrogenation catalyst in rotary kilns	32
Influence of high-speed jet on the particle distributions in downer	31
Impact of reactive holdup on process configuration selection: Is a neat reactive distillation column possible for ethyl levulinate production process?	31
Intensification of tubular heat-exchanger-reactors through multi-objective shape optimization: Trade-off between compactness and process irreversibilities	31
Identifying key parameters to maximize lavender essential oil components during supercritical extraction using machine learning models	31
3D numerical study of a single Taylor bubble rising along an inclined tube through Newtonian and non-Newtonian liquids	31
Editorial Board	31
A focused review of process intensification in methane dry reforming to combat coke using plasma	30
CFD modeling of ash deposition distribution in an industrial radiant syngas cooler to enhance the operation performance	30
Effects of cylinder cross-sectional geometry and blockage ratio on VIV-based mixing performance in two dimensional laminar channel flow	30
Effects of sidewall roughness on mixing performance of zigzag microchannels	29
Intensification of esterification reaction microbubble mediated reactive distillation	29
Development of a Nondestructive Monitoring Technique for Vial Freeze-Drying Process using Microwave Resonance Spectroscopy	29
Flow-accelerated polycondensation reaction to prepare rigid rodlike poly(p-phenylene-cis-benzobisoxazole)	29
A novel vortex flocculation reactor for efficient water treatment: Kinetic modeling and experimental verification	28
Optimization and experimental validation of an extractive distillation system with solvents mixture as separating agent	28
An industrial perspective of cogeneration – A comprehensive review	28
Process intensification of cooling crystallization of cholesterol from acetone solution using CO2 gas bubbles: Experiments and modeling	28
Perspectives into intensification for aviation oil production from microwave pyrolysis of organic wastes	27
Phosphonium-based deep eutectic solvents: Physicochemical properties and application in Zn-air battery	27
Synthesis of iron oxide nanoparticles with a ceramic membrane reactor: Effects on particles size distribution	27
Cavitation assisted novel method for synthesis of starch nanoparticles	27
Computational study of the segmental catalysis of steam-methanol reforming in heat integrated microchannel reactors for hydrogen production	27
The role of membrane technology in addressing pharmaceutical pollution in water	26
Enrichment and separation behaviors of impurities from stripped copper wire with super-gravity fields	26
Effects of internal structures on mass transfer performance of jet bubbling reactor	26
Blue LED photolytic method for the synthesis of 1,4-dihydropyridine derivatives from benzo [b]thiophene-2-carbaldehyde	26
Geometric characterization of a Shockwave Power Reactor (SPR) for biodiesel production	26
Greening the production of polymeric submicron particles by membrane-based manufacturing processes: A comparative analysis	26

Process intensification in the direct contact membrane distillation (DCMD) desalination by patterning membrane surface: A CFD study	25
Enhanced ORR kinetics and stability through synergy of Pt-Ni clustering and porous N-doped C/Ca aerogel support	25
Recent advances in delivery systems optimization using machine learning approaches	25
Multi-objective optimization of sustainable extractive dividing-wall column process for separating methanol and trimethoxysilane azeotrope mixture	25
A mechanistic study of the synergistic and counter effects of ultrasonic and solvent treatment on the rheology and asphaltene structure of heavy crude oil	25
Chemical looping gasification of microalgae biomass with Fe-based oxygen carrier for gas production and kinetic behavior	25
Dynamic control strategy of the ternary azeotrope separation process assisted by reactive-extractive distillation for ethyl acetate/isopropanol/water	25
Response surface methodology for continuous biodiesel production from Jatropha curcas oil using Li/pumice as catalyst in a packed-bed reactor assisted with diethyl ether as cosolvent	24
Modeling and performance assessment of innovative hybrid electro-disinfection processes for Escherichia coli inactivation in water	24
Synergistic approach to industrial wastewater treatment: Combining plasmolysis and microalgae cultivation	24
Electrochemical oxidation of direct blue 86 dye using MMO coated Ti anode: modelling, kinetics and degradation pathway	24
A critical review on nanoparticle-assisted mass transfer and kinetic study of biphasic systems in millimeter-sized conduits	24
Process-intensified in-situ transesterification of wastewater-grown Marvania coccoides biomass using immobilized lipase for biodiesel production	24
Process intensification using microwave heated multiphase reactors	24
Determining residence time distributions in oscillatory baffled reactors: A comparison between experiments and CFD-simulations	24
Highly effective emulsion liquid membrane based on Triethylamine for extraction of heavy metals: Investigation of extraction, de-extraction, swelling, and osmotic pressure gradient	24
Techno-economic assessment and feasibility study of a zero liquid discharge (ZLD) desalination hybrid system in the Eastern Mediterranean	24
Illumination conditions of photocatalyst-containing mist on the degradation of organic compounds	23
Advances in process intensification of the methanol chain in sustainable energy production and green chemical processes	23
Micromixing performance of a static mixer with an internal triply periodic minimal surface structure	23
Intensification of Rindera graeca transgenic roots proliferation and deoxyshikonin secretion in wave-agitated disposable bioreactor	23
Liquid-liquid extraction using combined hydrophilic-hydrophobic emulsion templated macroporous polymer micromixer-settlers	23
Editorial Board	23
Synergetic effect of ultrasound and hydrodistillation for extraction of patchouli oil: Screening, optimization and comparison	23
Determination of mass transfer coefficient in an L-shaped pulsed column with sieve-plate structure: Application of best-fit technique, drop size distribution, and forward mixing model	23
Control of pressurized microbubble generation by multi-channel membranes: Experiments and modeling	23
Investigation of ion-exchange membranes and erythritol concentration for the desalination of erythritol culture broth by electrodialysis	23
Digital manufacturing of variable lattice column internals	22
Intensification of a continuous adsorption system by applying an external magnetic field for the removal of heavy metals in the ionic state	22
An overview of mathematical modeling for conventional and intensified processes for extracting essential oils	22
Development of a disposable and easy-to-fabricate microfluidic PCR device for DNA amplification	22
Valorization of peach (Prunus persica L.) peels and seeds using ultrasound and enzymatic methods	22
Influence of processing conditions on hydrogen Sonoproduction from methanol sono-conversion: A numerical investigation with a validated model	22
Natural deep eutectic solvent-functionalized multiwall carbon nanotubes for lead removal from wastewater	21
An investigation of the interactions between system characteristics and controllability for reactive distillation systems	21
Desorption characteristic of oil from sludge surfaces under low-frequency ultrasound	21
Energy-efficient optimization design of bio-butanol fermentation broth purification process	21
Process intensification strategies for lignin valorization	21
Crude palm stearin: A green and fast fractionation method to obtain a natural oil structuring agent	21
When the use of derived wastes and effluents treatment is part of a responsible industrial production: A review	21
Numerical investigation of the thermo-hydraulic performance of DNA inspired double and triple helix wire coils	21
Fabrication of nano-layer-structure alumina powders from an alumina concentrate through an intensified Bayer process	20
Optimization of a combined electrocoagulation-electro-oxidation process for the treatment of Al-Basra Majnoon Oil field wastewater: Adopting a new strategy	20
Enhancing industrial vertical falling film evaporation through modification of heat transfer surfaces – an experimental study	20
Axial dispersion modelling of the residence time distribution in a millistructured plate reactor	20
Development of ohmic-assisted green extraction technique with ultrasonic and microwave pretreatments: Burdock (Arctium lappa L.) root extract	20
Design and operation of a cost-effective reactor for large protic ionic liquid synthesis	20
Periodic hydration of paddy rice in mass transfer, physical and thermodynamic properties	20
Comparative screening of organic solvents, ionic liquids, and their binary mixtures for vitamin E extraction from deodorizer distillate	20
Preparation and pipeline transport of CO2 as a hydrate slurry – Modelling and techno-economic analysis	20
Active chlorine electrosynthesis from dilute chloride solutions in a flow cell equipped with a Ti|Ti-Ru-Ir-oxides anode	20
Optimal design and operation of reactive distillation systems and reactive dividing wall systems with pressure swing distillation and hybrid distillation-pervaporation	19
Continuous nanoprecipitation of poly(D,L-lactide) in a rotor–stator spinning disk reactor	19
An Interview with Prof. Lan Xingying	19
Investigation of strong asymmetric pulsation patterns in a stirred-pulsed extraction measurement cell	19
Multi-objective optimization of an open-cycle, ocean thermal energy conversion system with desalinization	19
CFD evaluation of a microchannel reactor for ammonia synthesis using a Ruthenium-based catalyst	19
Microfluidic-assisted encapsulation of goji berry extract in nanoliposomes	19
Investigation of mixing characteristics in a novel SAR micromixer with locally overlapping V-shaped flow channels	19
Electrocoagulation with aluminum screen mesh electrodes for oil removal from oil-in-water emulsion	19
Detailed numerical investigation of the CO2	19
Thermodynamics analysis of multi-cycle performance of an integrated concentrated solar power, calcium looping and methane reforming system based on exergy approach	19
A core element CFD model for a two phase microfluidic fiber extractor	19
Selective catalytic transfer hydrogenation of polyunsaturated fatty acid methyl esters using Pd/organobentonite as catalyst under microwave heating	18
Experimental and numerical hydrodynamic study of millimetric zigzag channels in laminar and turbulent flow regimes	18
Evaluation of production processes of glycerol acetals using process intensification by flow chemistry	18
Study on desulfurizing and defoaming performance of cocurrent-flow rotating packed bed coupled with cyclone separator	18
Decrease in the organic content of refinery wastewater by photocatalytic Fenton oxidation using iron-doped zeolite: Catalyst preparation, characterization, and performance	18
Application of ZnAlFeO4 spinel and residual ash generated from pyrometallurgical magnetic separation processes: Catalysis and heavy metals immobilization	18
Enhanced extractive distillation processes for separating n-hexane and 1,2-dichloroethane via bottom flash heat pump	18
Implementation of electrocoagulation for reduction of Zn in an outlet stream from waste incineration plant	18
Application of continuous-flow process for the efficient synthesis of 4-nitroaniline under high T/P	18
Novel anisotropic T-S structured packing for improved hydrodynamic and mass transfer performance in rotating packed bed: A pathway for new generation packings	18
A comprehensive review of concentration gradient generator and droplet generator in microfluidics	18
Data-driven recurrent neural networks modeling of cyanobacteria growth in bubble columns reactors under sparging with CO2-enriched Air	18
Process intensification in the biopharma industry: Improving efficiency of protein manufacturing processes from development to production scale using synergistic approaches	18
A modelling approach for volumetric power input in the microscale and its utilization for the scale-up of solid-liquid mixing systems	18
Interpretation of induction time and particle recovery in a microstructured counter-current flow column	18
Performance analysis of a vacuum membrane distillation system coupled with heat pump for sulfuric acid solution treatment	18
The effect of grainsize of sediments in the CO2/CH4 replacement process within a hydrate lattice: An experimental report	18

Review of emulsion liquid membrane for heavy metals recovery from wastewater/water: Stability, efficiency, and optimization	17
Effect of ultrasound on parallel flow in a microchannel	17
High-yield hydrogen and methane production via supercritical water gasification of glucose using Ni/Cu-doped CeO2 catalyst: Synthesis process optimization utilizing RSM	17
CFD simulation of channel junction configurations in microfluidic systems: Parametric analysis for sustainable heavy metal extraction and environmental remediation	17
Research on the treatment of neodymium iron boron (NdFeB) waste by flash reduction melting method	17
Elucidating flow-directed 98% CO2 absorption using millimeter-sized coiled flow inverters: Nanocellulose-aided sustainable scope	17
Comparing the efficiency of extracting antioxidant polyphenols from spent coffee grounds using an innovative ultrasound-assisted extraction equipment versus conventional method	17
Optimizing underwater plasma discharges: Role of electrode geometry and electrical design	17
Investigations on fluid flow and mixing in fractal tree like biomimetic microchannel based on Murray's law	17
Flow orientation as a parameter for process intensification in mesoscale biphasic flow	17
Application of the approximate mapping method and validation of the mixing evaluation method based on fractal dimension in an oscillatory baffled reactor	17
Experimental subcooled flow boiling instability and heat transfer analysis through zinc oxide coated copper hybrid nanofluid boiling on the structured microchannels	17
Design of a multiproduct reactive distillation system for DEC and EMC production	17
Emulsification characteristics and dehydration of shale oil emulsions under high-frequency electric field	17
Kinetic study of the zeolite membrane-assisted transesterification reaction with methanol removal	17
Controllable preparation of ultrafine KMnF3 perovskite by combining micro-channel reactor and microwave-ultrasonic assistance	17
Treatment of aquaculture wastewater by C-MFCs	17
Numerical simulation and structural recombination of microchannel micromixer for excellent mixing performance	17
Innovative Gamma-irradiated membrane for enhanced performance in membrane distillation treatment of real textile-dye wastewater	17
Carbon dioxide absorption and desorption experiments based on MDEA	17
Process intensification of continuous xylitol production in a 3D printing fixedbed microbioreactor by immobilized co-culture of Saccharomyces cerevisiae and Pachysolen tannophilus	16
Innovative fast-dynamic tool to characterize maldistribution in gas-liquid multi-channel reactors	16
A single-step catalytic process for the production of high-octane molecules from normal paraffins using zeolite supported bi-functional catalysts	16
Physics-informed machine learning predicting CO2 capture performances of organic mixtures	16
Conceptual study on the intensification of gas–liquid mass transfer in trickle bed reactors by the application of strut-based and novel sheet-based periodic open cellular structures (POCS)	16
Modeling and thermodynamic optimization of distributed combined heat and power system based on biomass chemical looping hydrogen generation process	16
Enhanced mixing characteristics of unbaffled U-shaped microreactor coupled oscillatory flow	16
Multi-phase CFD modelling for hydroformylation of 1-hexene with microbubbles	16
Editorial: Voices of the next generation of process intensification	16
Process intensification in the ketalization of glycerol with acetone catalyzed by NaHSO4-NaOH catalytic system	16
Applicability of electrocoagulation process for removal of contaminants from debrominated wastewater	16
Process intensification technologies to enhance agricultural sustainability and safety	16
Citric acid production: A comprehensive assessment from a fermentation strategy to a circular economy process	16
Boosting CO2 Mineralisation Reaction with a Spiral Internal Draft Tube Reactor: From Concept to Continuous Operation	16
An Interview with Dr. Bettina Muster-Slawitsch	16
Removal of free acids from heavy alkylbenzene sulfonic acid by a novel three-step method	16
Microwave-assisted synthesis of alkyd resins using response surface methodology	16
Editorial Board	16
Design and simulations of a helical oscillatory baffled reactor for biochemical reactions	16
Large-scale conversion of bio-methanol into dimethyl ether: Performance analysis, multi-objective optimization, and a rigorous comparison between catalysts and process schemes	16
Dynamic modeling and modification of ternary semicontinuous distillation without a middle vessel for improved controllability and energy performance	16
Innovative Technologies for Succinic Acid Fermentation: A Path to Sustainable Production	16
Chemical explorations: Adventures of learning, teaching and research in the jungle and Caribbean	16
Editorial Board	16
Impact of structure of a rotating zigzag bed with block-rotor on separation performance in distillation	15
Assessment of metallic membrane-based counter-current micro-contactor for non-dispersive solvent extraction: Experimental studies and modelling	15
The productive preparation of synthetic rutile from titanium slag via an improved microwave heating and acid-alkali joint leaching approach	15
Drying kinetics and energy efficiency of low-grade zinc oxide powders under microwave heating	15
High-frequency ultrasound separation of crude-oil-in-water microemulsions	15
Simulation, optimization and control of the process of synthesis of ethyl propionate by reactive distillation	15
Ultrasound-assisted extraction vs. microwave-assisted extraction for sustainable development goals: Selecting the ideal lipid extraction and fatty acid profile	15
Novel heat pump reactive distillation and dividing-wall column reactive distillation processes for synthesizing isopropyl acetate to save TAC and reduce CO2 emissions	15
A comparative analysis of micro-mixing process in a confined impinging jet reactor with/without applying ultrasound	15
Micromixing performance of a miniaturized annular rotating flow mixer (MARFM)	15
Sustainable agriculture through advanced processing: Balancing social benefits and environmental impact	15
A comprehensive study of electrodeposition by response surface methodology with presenting hybrid bi-conductive surfaces for promoting pool boiling	15
Detailed mechanistic insights into photocatalytic dye degradation via electronic and agricultural waste derived catalysts	15
Effect of surface engineering of nanofillers using plasma-treated water for carbon dioxide capture in mixed matrix membranes: Experimental and molecular dynamics	15
Simulation of static drying and drying with intermittent rotations in a horizontal drum of rice used in the cultivation of Metarhizium anisopliae	15
Sustainable aviation fuel from Butanol: A Study in optimizing Economic and Environmental impact through process intensification	15
Plasma-assisted ethylene removal using silica gel and zeolite in AC dielectric barrier discharge	15
Characterization of sulfonated raw coal products as enhanced adsorbents for toxic methyl parathion pesticide: Advanced equilibrium investigation and effect of acid concentration	15
Degradation of Rhodamine 6G dye using a novel glass-marble packed bed reactor-based cavitation	15
Parametric design of curved hydrocyclone using data points and its separation enhancement mechanism	15
The role of reactant contact modes in droplet-based microfluidics	15
Development of control strategies for an air separation unit with a divided wall column using a pressure-driven digital twin	15
Heat integration and dynamic control for separating the ternary azeotrope of butanone/isopropanol/n-heptane via pressure-swing distillation	15
Bioprocess strategies for intensification of microbial validamycin A production	14
Zirconia encrusted ceramic composite membrane for uremic toxins removal: Fabrication and assessment of biocompatibility	14
A comprehensive review of pinch flow fractionation in microfluidics: From principles to practical applications	14
Numerical investigation of mixing performance for a helical tangential porous tube-in-tube microchannel reactor	14
Intensifying Escherichia coli inactivation in apple juice using a UV-C-based process	14
Preface	14
Solving the microwave heating uniformity conundrum for scalable high-temperature processes via a toroidal fluidised-bed reactor	14
Evaluating the experimental CO2 stripping performance of a new generation multicapillary Taylor flow reactor	14
AI-aided process intensification of structures	14
Piston reactor for chemical energy storage: Modeling study to explore electro-mechanical conversion route using propane feedstock	14
Unveiling the role of mixing enhancement in oxygen vacancy concentration and particle size during high-throughput synthesis of ZnO photocatalyst in a microreactor	14
Editorial Board	14
Simultaneous magnetization and activation as a facile way to improve the adsorption capacity of walnut shell biochars for anionic azo dyes	14
Continuous oscillatory flow as process intensification strategy in protein extraction from brewer's spent grain	14
Experimental study of low temperature plasma synergistic catalyst for treatment of DEP in water	14
Study on the process intensification of superaerophobic materials to improve CO2 mass transfer efficiency	14
Optimal waste management during the COVID-19 pandemic	14
Hybrid strategy for the selective recovery of the intracellular enzyme from the cytoplasmic location using hydrodynamic cavitation: Scalable approach	14
Development of intensified reactors: A process intensification methodology perspective	13
Purification of methyl isobutyl ketone via dividing wall column with an internal boiling point of a heterogeneous azeotrope	13
Bio-nano hybrid material for mitigating recalcitrant phenolic compounds	13
Enhanced dye wastewater treatment via PVDF membrane distillation: Influence of dye classes on performance and fouling	13
A novel approach for producing stable cellulose nanocrystal colloidal suspensions via hydrodynamic cavitation	13
Semi-continuous subcritical hydrolysis of orange waste biomasses for integrated production of fermentable sugars and platform chemicals	13
Soybean oil extraction with ethanol from multiple-batch assays to reproduce a continuous, countercurrent, and multistage equipment	13
Enhanced mixing performance of electrokinetic flows in a cross-junction microchannel with sawtooth structures	13
Recent developments in utilizing hydrous ethanol for diverse engine technologies	13
Purification of 1-butanol from rich and lean aqueous heteroazeotropic mixture by sponge-like ionic liquid process	13