Chemical Engineering and Processing-Process Intensification

Article	Citations
Hybrid and boosted structures of multi-effect mechanical vapor compression for enhanced water production	218
Optimizing phosphoric acid concentrating using microwave technology: Theoretical and empirical model of energy efficiency and P2O5 concentration	144
Use of process intensification concepts for targeted delivery of inhaled aerosolized medicines	105
Hydrodynamic and acoustic cavitation effects on properties of cellulose fibers	66
Process intensification in the continuous dehydrogenation of methylcyclohexane to toluene	63
Editorial Board	61
Reactive distillation configuration for the production of ethyl acrylate	57
Process integration and techno-economic assessment of crystallization techniques for Na2SO4 and NaCl recovery from saline effluents	53
Syngas production via microwave-assisted Dry Reforming of Methane over NiFe/MgAl2O4 alloy catalyst	50
Intensifying CO2 condensation in the flue gas through the supersonic separators by hydrogen enriching: A computational study	49
Comparative performance assessment of direct contact membrane distillation with and without localized heating	48
Structural optimization of separation layer and porous PES substrate for enhanced pervaporation desalination performance	48
Ultrasound combined with chemical hydrolysis as a pretreatment for microencapsulation of beetroot waste by spray and freeze drying	48
Integrated system of electrocoagulation, activated sludge, and electrooxidation for the treatment of oil refinery wastewater	47
Performance study of lithium ion sieve composite in high gravity for Li+ adsorption	45
High-Throughput Synthesis of Superparamagnetic Fe3O4 Nanoparticles in Chaotic Convection Mode	42
An effective procedure for optimized design of heat pump distillation process	41
Numerical investigation of continuous acoustic particle separation using electrothermal pumping in a point of care microfluidic device	39
Industrial waste heat recovery: A helix-weaved convection-radiation converter for heat transfer enhancement in gas heat exchanger	39
Modeling and simulation of continuous fixed adsorptive distillation with adsorbent regeneration using thermal desorption	39
Emission reduction of condensable particulate matter in ammonia-based desulfurized flue gas by heterogeneous vapor condensation	38
CO2 utilization for ammonia removal in skim latex: Processing and rubber properties	37
Study on heat transfer and flow resistance characteristics of cracking furnace tube by axial width of opening combination rotor blade	37
Green process intensification using microreactor technology for the synthesis of biobased chemicals and fuels	37
Effects of cross baffles on the flow of the microalgae in raceway photobioreactors	37

Controlled synthesis of ZIFs by microemulsion method at high-throughput in a chaotic microreactor	36
Editorial Board	36
Acoustic standing wave with a frequency sweeping in a microfluidic system of parallel channels	35
Characterisation of conjugate forced convection in a wavy solar power plant: The role of porous metallic blocks	35
Treatment of organic wastewater by ozone in a continuous rotating solid foam stirrer tank	34
Intensified ceria recovery from graphite substrate and cleanup of leachant using sonication	34
Control design for throughput improvement of fuel cell-integrated solar heated membrane desalination system	34
Theoretical study of the interactions between demetallization agent and Ni/V porphyrins and the removal under microwave irradiation	34
Multiplicities in ethanol dehydration by extractive distillation processes with ethyleneglycol	33
CFD modelling and simulation of a zeolite catalytic membrane reactor for low temperature water-gas shift reaction	33
Editorial Board	33
A two-phase model for simulation of water transfer during lipase production by solid-state cultivation in a tray bioreactor using babassu residues as substrate	33
Measuring the velocity profile of spinning particles and its impact on Cr(VI) sequestration	33
A novel membrane-based bubble generator for oxygen dissolution in water	32
Editorial Board	32
Effect of additives and electrode roughness on the production of hypochlorite sanitizer by the electrolysis of NaCl solution in a batch recycle reactor	32
Separation characteristics and structure optimization of double-field coupling demulsifier with composite curing cone	31
Effect of stator geometries on flow fields and mixing performance for viscous fluids	31
Assessment of population balance approach and maximum entropy on drop size behavior of vanadium extraction from sulfate solution in continuous pilot plant column	31
A novel design of split and recombination multilayer micromixers with excellent hydraulic and mixing performance based on the baker's transformation	31
Improvement of Cyclohexene/Cyclohexane separation process design via chemical looping technology using reactive distillation and thermally coupled configurations	31
Microwave-assisted extraction and purification of aleuritic acid from seedlac: A fast, eco-friendly and cost-effective single process for enhanced yield and purity	30
Evaluating the advantage of turbulent flow to diminish concentration polarization in Roto-dynamic RO system	30
A stochastic data-driven Bayesian optimization approach for intensified ethanol–water separation systems	30
Reactive and non-reactive residue curve maps analysis to produce Butyl Lactate by catalytic distillation	29
Consecutive Flow Distributor Device for Mesostructured Reactors and Networks of Reactors	29
Sonochemical synthesis of highly efficient Ag3PO4-Guar gum nanocomposite with photo-oxidation property under visible light irradiation	29
Conceptual design of a crystallization-based trioxane production process	28
Ultrasonically intensified extraction and emulsification of Azadirachtin and its bioactivity analysis for fenugreek crop growth	28
Intensify staple fibre drying by optimizing air distribution in multistage convective dryer using CFD	28
Thermal-plasma-assisted renewable hydrogen and solid carbon production from ionic liquid-based biogas upgrading: A process intensification study	28
Enhancing electrochemical capacitor performance through the application of nanostructured carbon materials as conducting additives	27
Intensified solvent extraction of L-tryptophan in small channels using D2EHPA	27
An internal thermal integration arrangement for multicomponent batch rectifier: Introducing vapor recompression mechanism	27
Editorial Board	27
CFD-aided conceptual design of an intensified reactor for the production of synthetic natural gas within the power-to-methane context	27
Inert supports enhanced sulphur-resistant of iron-based oxygen carriers in chemical looping combustion of element sulphur	26
Prototyping of rotating packed bed structural internals	26
Biodiesel production using microreactor with integrated microheater through multi-objective optimization approach	26
Ultrasound-assisted encapsulation of ginger (Zingiber officinale) oil in gum arabic and its controlled release study	26
Enhancing vanadium extraction from shale by microwave irradiation for VBS grindability improvement: Hot spots and thermal stress	25
Intensification of performance of pipe with nanoparticle flow along turbulator with obstacles	25
Hydrodynamics and Energy Analysis in Suspended Catalyst Photocatalytic Membrane Reactors	25
Hydrodynamics and gas-liquid mass transfer of CO2 absorption into [NH2e-mim][BF4]-MEA mixture in a monolith channel	24
Investigation of mass transfer in valve-controlled gas–liquid segmented flow	24
A numerical investigation on combustion characteristics in a thermally orthotropic narrow channel with hydrocarbon fuels	24
Influence of discontinuous on-line ultrasonic irradiation applied in ultrafiltration MBR systems over the physical-chemical and biological characteristics of the activated sludge	24
Energy-efficient and cost-effective alternative separation techniques for 2-methoxyethanol–toluene azeotropic mixture: Design and control studies	24
Accelerated and simplified synthesis of magnetic mesoporous nanoparticles in a continuous multistep microfluidic system	23
Investigation of micromixing in the ART plate reactor PR37 using the acetal cleavage method and different mixing models	23

CO2 chemical absorption into AMP aqueous solution and mass transfer intensification in cascade sudden expansion microchannels	23
Heat transfer enhancement of moving bed indirect heat exchanger through directional granule migration in 3-D shell enclosure	23
Intensification of activity of xylanase enzyme using ultrasound and its application for brown rice polishing	23
Removal of bubbles from eletrodes in a planar cyclonic electrolyzer	23
Sustainable design and optimization of the recovery process of acetic acid from vinasse: Operational, economic, and environmental analysis	23
Enhanced photocatalytic reduction of Cr(VI) in aqueous solution by UV/TiO2 process in the presence of Fe(III): Performance, kinetic, and mechanisms	23
Effects of flow fluctuations and buoyancy on heat transfer from a sphere in non-Newtonian nano fluids: Potential for intensification	22
Study of ultrasound, initial concentration and electrode material on the electrochemical removal of selenium and strontium	22
Mapping adsorbent properties to optimal process performance of two-bed temperature swing adsorption by superstructure optimization	22
Decomposition of hexane and benzene by dielectric barrier discharge plasma and reaction temperature: Comparison of performance of DC nano-second pulsed power supply and AC high voltage power supply	22
Editorial Board	22
Improvements in crystallization of copper sulphate using ultrasound and comparison with conventional method	22
Etherification of olefins from catalytic cracking gasoline to increase its octane number	22
The mixing sensitivity of toluene and ethylbenzene sulfonation using fuming sulfuric acid studied in a rotor-stator spinning disc reactor	22
Parastillation and metastillation applied to bioethanol and neutral alcohol purification with energy savings	21
Permeability model establishment and experimental verification of a tree-like branching structure with conventional scale	21
Curvature induced intensification of biodiesel synthesis in miniature geometry	21
Correlations for predicting heat transfer coefficients in bubble columns	21
The effect of cracks and alloy phase conditions on the hydrolysis characteristics of Al-10Bi alloy powder (composites)	21
Effects of conductive drying on drying kinetics and retention of bioactive compounds in mistletoe leaves	21
Multi-walled carbon nanotubes as a platform for Immunoglobulin G attachment	21
A systematic review of mathematical modeling for molecular distillation technologies	20
Energy-efficient recovery process of 2,3-butanediol using 2-heptanol extraction	20
Immobilisation of L-proline onto mixed-linker zirconium MOFs for heterogeneous catalysis of the aldol reaction	20
Dual steam turbines in biogas power processes	20
Nano-microbubbles and feed size interaction in lead and zinc sulfide minerals flotation	20
Editorial Board	20
An experimental and modeling study of the application of membrane contactor reactors to methanol synthesis using pure CO2 feeds	20
Quantification of interfacial mass transfer during droplet formation in a microfluidic T-junction using VOF	20
Intensification of bio-synthesis of zirconium oxide (ZrO2) nanoparticles derived from novel Crescentia Cujete fruits: Effects on diesel engine characteristics powered by waste engine oil methyl ester-	19
Acoustic-assisted centrifugal microfluidics for particle/cell separation	19
Degradation of organic/inorganic pollutants through photofenton membrane bioreactor (PFMBR) and lumped kinetic modeling in pharmaceutical effluent	19
Performance investigation on a self-powered microbial pollutant adsorption cell with N-LAC/PVDF cation exchange membrane	19
Enhancement of flame stability by a short Pt segment for CH4/H2 blended fuels in a micro-flow reactor	19
The experimental and modeling study on a new process of iron/cobalt alloy production using indirect reducing agent of glycerol under microwave heating	19
Mixing intensification in an acoustofluidic micromixer aided with micro-pillars	19
Structure optimization of an internal circulation rotating packed bed for the circulation liquid flow improvement: Numerical study	19
Advances in design of internals: Applications in conventional and process intensification units	19
Research on the optimization of the temperature field distribution of a multi-source microwave agent system based on event-triggered	19
Surrogate modeling-based multi-objective optimization for the integrated distillation processes	19
Gas-liquid flow and mass transfer characteristics in improved heart-shaped structure microreactor	18
Overview of recent trends in microchannels for heat transfer and thermal management applications	18
Hydrodynamics and wet pressure drop model based on flow regimes of the novel Flow-Divided Baffle-Bridge Tray	18
Microwave-assisted epoxidized oil production from the wet microalga Nannochloropsis gaditana to obtain environmentally friendly epoxy resins	18
The use of ultrasound-assisted precipitation for the production of micro-sized crystals with a narrow CSD	18
Harnessing solar power in industry: Heuristic optimisation design and transient thermal modelling of parabolic trough solar collector networks	18
Production of chitosan nanofibers using the HFIP/acetic acid mixture as electrospinning solvent	18
Characterization halotolerant lactic acid bacteria Pediococcus pentosaceus HN10 and in vivo evaluation for bacterial pathogens inhibition	17
Structural parameters of venturi injector for periodic air recovery based on response surface methodology	17
Kinetic modeling and process intensification of ultrasound-assisted extraction of d-limonene using citrus industry waste	17
Continuous lactose recovery from acid whey by mixed suspension mixed product removal (MSMPR) crystallizer in the presence of impurities	17
The role of Acidithiobacillus ferrooxidans in the ocean polymetallic nodules reductive bioleaching: Electrochemical insights into interface processes	17
A novel gas inducing rotor-stator impeller for gas-liquid foam generation	17
CO2 removal using 1DMA2P solvent via membrane technology: Rate based modeling and sensitivity analysis	17
Sugar production from husk coffee using combined pretreatments	17
Enhanced biosurfactant production in a continuous fermentation coupled with in situ foam separation	17
Process intensification in the oil and gas industry: A technological framework	17
Application of rotating cone reactor for continuous biodiesel production: Effect of cone geometry and optimization of operating variables through response surface methodology (RSM)	17
Microwave-assisted flow synthesis of multicore iron oxide nanoparticles	17
Offshore decarbonation of CO2-rich natural gas intensified via gas-liquid membrane contactors with blended aqueous-amines	17
Photocatalytic oxidation of ketone group volatile organic compounds in an intensified fluidized bed reactor using nano-TiO2/UV process: An experimental and modeling study	17
Plasmon enhanced photocatalytic degradation of 4-chlorophenol using zinc oxide nanorods decorated with gold nanoparticles as supported catalysts under natural sunlight	17
Design of a novel optimized microfluidic channel for CTCs separation utilizing a combination of TSAWs and DEP methods	17
Novel packed bed reactor designed for Prileschajew epoxidation of fatty acid methyl ester: Intensification of mass/heat transfer	17
Evaluation of the CO2 gasification of residual char under a regeneration atmosphere via calcium‒based chemical looping gasification	17
Novel biorefinery-Integrated-Kraft-pulping network for sustainable development	16
CFD dynamic mesh-based simulation and performance investigation of combined guided float valve tray	16
Highly efficient removal of methyl orange from aqueous media by amine functional cyclotriphosphazene submicrospheres as reusable column packing material	16
Pressure drop reduction of the impeller spiral static mixer design enabled by additive manufacturing	16
Effective separation of fusing agent from refined magnesium slag by supergravity technology	16
Intensification of pyrene degradation by native Candida tropicalis MTCC 184 with sonication: Kinetic and mechanistic investigation	16
Determination and optimisation of Resonant Acoustic Mixing (RAM) efficiency in Polymer Bonded eXplosive (PBX) processing	16
Process intensification in micro-fluidized bed systems: A review	16
Ultrasound-assisted polyphenol extraction of acerola and jambolan pomaces: comparison of extraction protocols, kinetic modeling, and life cycle assessment	16
Fuel grade bioethanol reforming in a fluidized bed reactor over highly durable Pt-Ni/CeO2-SiO2 catalysts	16
Performance and Emission Analysis of Modified Compression Ignition Engine from Diesel Engine to Variable Load using Petrol and LPG Fuel	16
Thermal, frictional and exergetic analysis of non-parallel configurations for plate heat exchangers	16
Perspectives on the process intensification of CO2 capture and utilization	16
Modelling of a hybrid bioelectrocatalytic flow reactor with NADH cofactor regeneration by immobilized rhodium mediator for pyruvate bioconversion	16
Experimental and numerical study on thermodynamic characteristics of a vacuum membrane distillation system based on mechanical vapor recompression for sulfuric acid waste	16

Fabrication of a hybrid shell and double pipe heat exchanger by means of design and performance assessment	16
Study on the oxidation of ammonium sulfite by ozone in a rotating packed bed	16
Optimization of effective parameters in arsenite oxidation process with Cl2, H2O2, and O3 using response surface methodology	16
Dynamic simulation of control systems for bioethanol reactive dehydration: Conventional and intensified case studies	16
Photothermal Sweeping Gas Membrane Distillation and Reverse Electrodialysis for light-to-heat-to-power conversion	16
Experimental study of flow and thermal behaviour in single and multi-pass chevron-type plate heat exchangers	16
Different types of bubbly flows in a confined channel with the aim of limiting microalgae biofilm development – Part II: Study of the development and removal of microalgae biofilm	16
Intensification of heat and mass transfer process in MHD carreau nanofluid flow containing gyrotactic microorganisms	16
Removal of chemical oxygen demand from real petroleum refinery wastewater through a hybrid approach: Electrocoagulation and adsorption	16
Artificial Neural Network based modeling of the vacuum membrane distillation process: Effects of operating parameters on membrane fouling	16
Experimental study on the flow behaviors in a vane-type separator	15
Integration of photocatalytic persulfate system with nanofiltration for the treatment of textile dye at pilot scale: Statistical optimization through chemometric and ridge analysis	15
Numerical investigation of shear flow structure induced by guided vane in a liquid-liquid cyclone reactor	15
Numerical simulation of fluid flow characteristics and ultrasonic cavitation performance in novel-designed stirred tank sonoreactor	15
Optimal design and control of an energy-efficient triple-side-stream quaternary extractive distillation process	15
Ethanol removal by stripping with CO2 reduced-size bubbles: Mechanical and thermodynamic entrainments	15
An Interview with Francesca Paradisi	15
Investigation of gas-liquid mass transfer in slurry systems driven by the coaxial mixer	15
Processing technologies of oil and gas based on molecular refining: Separation and conversion	15
Hot microbubble injection in thin liquid film layers for ammonia separation from ammonia rich-wastewater	15
Swirl influence on thermo-hydraulic performances within a heat exchanger/reactor with macro deformed walls in laminar flow regime	15
Flow characteristics and mass transfer performance of phosphoric acid extraction in a T-type central plug-in microreactor	15
Extractive distillation of ethyl acetate-ethanol-water ternary system using deep eutectic solvent (DES): A techno economic and energy assessment	15
Stress-blended eddy simulation of flow characteristics in stirred tanks with different curved blade impellers	15
Direct synthesis of hydrogen peroxide at additively manufactured fluid guiding elements as structured catalysts	15
Performance analysis of a novel gas-liquid separator with industrial application	15
Deposition of aerosol particles and characteristics of turbulent flow inside wavy pipe using Eulerian-Lagrangian approach	15
Decentralized control of ideal ternary reactive distillation column with inert	15
Effect of low-nitrogen combustion system with flue gas circulation technology on the performance of NOx emission in waste-to-energy power plant	15
Cell/particle manipulation using Bulk Acoustic Waves (BAWs) on centrifugal microfluidic platforms: A mathematical study	15
Performance evaluation during extraction technique in modified rotating disc column: Experimental and mathematical modeling	15
Design and optimisation of lysozyme protein purification process using non-thermal progressive freeze concentration technology	15
Intensification of isobutane/1-butene alkylation process in a micromixing microreactor catalyzed by ILs/H2SO4	15
Improvement of mixing efficiency in twisted micromixers: The impact of cross-sectional shape and eccentricity ratio	15
Neutralization of titania waste acid with iron oxides	15
Ultrasound assisted one step in-situ preparation and characterization of rGO-WO3 nanocomposite for degradation of organic dyes	15
Optimization of antimicrobial properties of essential oils under rotating magnetic field	15
High throughput millifluidics mixer with double triangle baffle for improvement of mixing performance and reduction of flow resistance designed by grey relational analysis	14
Heat utilized pressure swing distillation (PSD) process for the separation of the maximum boiling azeotrope HCl and Water in the Cu-Cl Cycle	14
Experimental determining flame characteristic of premixed methane/air mixtures in a microchannel supported with Pt/Al2O3/Ni catalyst	14
Valorization routes of citrus waste in the orange value chain through the biorefinery concept: The Argentina case study	14
Process intensification for valuable metals leaching from spent NiMH batteries	14
Valorisation of glycerol with cinnamaldehyde over phosphotungstic acid encapsulated on a NaY zeolite	14
Methyl orange decolourization through hydrodynamic cavitation in high salinity solutions	14
The effect of inlet velocity, gas temperature and particle size on the performance of double cyclone separator	14
Techno-economic analysis of plastic wastes-based polygeneration processes	14
Physics Informed Neural Network application on mixing and heat transfer in combined electroosmotic-pressure driven flow	14
Effect of jet cavitation on oil recovery from oily sludge	14
Enhanced oxygen recovery and energy efficiency in a reconfigured single column air separation unit producing pure and impure oxygen simultaneously	14
Treatment and nutrient recovery from acetophenone based wastewater by an integrated catalytic intense pulsed light and Tribonema sp. cultivation	14
Enhancing biodiesel production from waste date seed oil through ultrasonic-assisted optimization: A sustainable approach using non-edible feedstocks	14
Editorial Board	14
Process intensification of metal solvent extraction studies using a miniaturized solvent extraction plant	14
Effect of immobilizing ionic liquid on amine-functionalized MIL-101(Cr) incorporated in Matrimid membranes for CO2/CH4 separation	14
Numerical and experimental investigation of Tesla micromixers with different three-dimensional herringbone structures	14
Optimization of micromixer with different baffle shapes using CFD, DOE, meta-heuristic algorithms and multi-criteria decision making	14
Development of a triple impinging jet mixer for continuous antisolvent crystallization of acetylsalicylic acid reaction mixture	13
Process Intensification of Propionic Acid Separation – Effect of Channel Geometry on Microchannel Distillation	13
Design of Multistage Extraction System for Simultaneous Separation of Silver and Gold from Thiourea Solutions	13
Synthesis of amines: From a microwave batch reactor to a continuous milliflow reactor with heterogeneous feed and product	13
Direct production of diethyl carbonate from ethylene carbonate and ethanol by energy-efficient intensification of reaction and separation	13
Challenges and opportunities in process intensification to achieve the UN's 2030 agenda: Goals 6, 7, 9, 12 and 13	13
Design and characterization of a multi-frequency semi-pilot ultrasonic reactor: Application to the extraction and oxidation of flaxseed-gum	13
Laser induced graphene and Cu nanoparticles functionalized microtextured chemiresistive sensor for the fast detection of aqueous Hg2+	13
MgAl layered double hydroxide (LDH) for promoting ammonia synthesis in non-thermal plasma: Role of surface oxygen vacancy	13
Selective separation of propane from the propylene-propane mixture using pure silica zeolites: A molecular dynamic simulation	13
Taylor flow bubble transport characteristics of low partial pressure CO2 absorption in a serpentine micro contactor	13
Numerical insights into magnetic particle enrichment and separation in an integrated droplet microfluidic system	13
Hydrated metal salt pretreatment and alkali catalyzed reactive distillation: A two-step production of waste cooking oil biodiesel	13
Intensification of the alcohol-to-jet process to produce renewable aviation fuel	13
Design and intensification of distillation processes for furfural and co-products purification considering economic, environmental, safety and control issues	13
Base modified activated carbon-nanoparticle hybrid for water disinfection	13
Generation of micro-nano bubbles by self-developed swirl-type micro-nano bubble generator	13
Studying the influence of different parameters on the electrochemical oxidation of tannery dyes using a Ti/IrO2-SnO2-Sb2O5 anode	13
A Critical Review On Heavy Metals Removal Using Ionic Liquid Membranes From The Industrial Wastewater	13
Intensification of chondrocytes proliferation by microcarriers and wave-induced mixing: Reynolds number influence on CP5 cells growth	13
Advanced treatment of coal gasification wastewater by O3/Fenton in a rotating packed bed in tandem with coagulation	13
A comparative study on the decolorization of Tartrazine, Ponceau 4R, and Coomassie Brilliant Blue using persulfate and hydrogen peroxide based Advanced Oxidation Processes combined with Hydrodynamic C	13
Mixing intensification through modifications of PBT impellers studied by DEM-VOF method	13
Experimental and numerical investigation on flame pattern formations of non-premixed CH4 and air in a planar micro-combustor	13
Energy, exergy, and hydrodynamic performance of a spiral heat exchanger: Process intensification by a nanofluid containing different particle shapes	13
An optimization study on quality promotion of heavy crude oil exposed ultrasonic waves and magnetic nanoparticles addition	13
Byproduct use optimization in a combined sinter plant and blast furnace model	13
A Short Review of Dividing Wall Distillation Column as an Application of Process Intensification: Geographical Development and the Pioneering Contribution of Prof. Arturo Jimenez in Latin America	13
Cumene autooxidation to cumene hydroperoxide based on a gas-liquid microdispersion strategy	13
Carbon-low, renewable hydrogen production from methanol steam reforming in membrane reactors – a review	13
Encapsulation of red sorghum extract rich in proanthocyanidins: Process formulation and mechanistic model of foam-mat drying at various temperature	12
Process intensification using microwave heated multiphase reactors	12
Study of a solar installation for olive mill sludge treatment	12
Micromixing efficiency of non-Newtonian fluid in rotating packed beds with novel tube-tube premixers	12
Photocatalytic degradation of nitrogen oxides (NOx) in a continuous-flow photoreactor with aluminosilicate microspheres coated with TiO2 thin films.	12
Enhancing BMP and digestibility of DAF sludge via hydrodynamic cavitation	12
Enzymatic membrane reactors: Designs, applications, limitations and outlook	12
Effect of ultrasound on mass transfer during vacuum impregnation of low-porous food materials on the example of potato (Solanum Tuberosum L.)	12
Hydrodynamic behavior of standard liquid-liquid systems in Oldshue–Rushton extraction column; RSM and ANN modeling	12