Materials Chemistry and Physics

Article	Citations
Surface modification of cotton fabric by kaolin-derived zeolite N to enhance efficient removal of particulate matter	171
Structure, ferroelectric and magnetic behavior in Mn doped 0.75 BiFeO3-0.25BaTiO3 ceramics	144
Bilayer molybdenum contact prepared via high-power pulsed magnetron sputtering: Effects of substrate bias	123
Thermoset poly(2-methoxyethyl acrylate)-based polyurethane synthesized by RAFT polymerization and polyaddition	113
Assessing the structural and interaction behaviour of Pr@Gd2O3 nanoparticles with biological entities	107
Chemo-mechanical processing of hot chamber die cast scrap to design ZnO-based composite anode for lithium-ion batteries	99
Highly enhanced luminescence of Gd2O3:Ho3+ phosphor by heat treatment	98
Highly precisive arrangement of continuous carbon fiber and its reinforcing effect on hydroxyapatite	93
Silica extracts from fly ash modified via sol-gel methods and functionalized with CMPO for potential scavenging of rare earth elements La³⁺ and Ce³⁺	93
Doping-induced Ti3+ state and oxygen vacancies in TiO2: A single-chip combinatorial investigation	91
Ultrasound-assisted adsorption of dyes and cadmium ion from aqueous solutions by ZnAl2O4 nanoparticles	88
Temperature-controlled synthesis of novel boron nanofibers by laser ablation technique	88
Corrigendum to “Surface modified porous silica-alumina glasses with enhanced hydrothermal stability for biomass conversion” [Mater. Chem. Phys. 289 (2022) 126504]	86
Revealing the effect of Gd alloying on oxidation resistance and oxide film protection performance of AZ80 alloy	82
Microstructural influence on corrosion behavior and the TiO2 nanostructured layer growth in the Ti–10Mo–3Sn alloy	81
Microwave electrodeposited Ni on Cf for synergistic improvement of compressive and thermoelectric properties of cement-based composites	81
In situ synthesis and characterization of TiB2/FeMnAl metal matrix neutron absorption composites	80
The effect of the crystallographic form of MnO2 on the kinetics of oxygen reduction and evolution reaction	79
Improved oxidation stability of carbon-coated Ni nanoparticles synthesized by one-step electrical wire explosion	75
High contrast green luminescence from spin-coated Mo-doped β-Ga2O3 thin films	75
Electrochemical studies on ammonium magnesium carbonate tetrahydrate/calcium carbonate composite coating on AZ91D magnesium alloy	71
Influence of the transition metals central atom nature on the optical and electrophysical properties of phthalocyanine nanowires	70
Effect of hydrogen evolution on morphology and capillary performance of electrodeposited copper wicks	69
Thermal stability and crystallisation behavior of newly developed Cu–Zr–Ag–Ti–Ni multicomponent bulk metallic glass	68
Exploring the utilitarian aspects of a noxious exotic weed, Lantana camara: From green synthesized nanoparticles to a new frontier in biomedical innovation	67

Radioactive iodine capture by hexagonal boron nitride (h-BN) nanosheets in liquid and vapor phases: Experimental and theoretical studies	67
Catalytic transfer hydrogenation of α-angelica lactone over Nickel(II) modified UiO-66 metal organic framework under mild conditions	66
Mineralized nodule formation in primary osteoblasts culture in titanium doped phosphate glass and in-house prepared freeze dried demineralized bone extracts	66
Iron doped nickel oxide nanoparticle modified carbon paste electrode sensor for paracetamol in presence of ascorbic acid: A voltammetric study	65
Solid-state synthesis of LiYGeO4 and luminescence properties of Dy-doped samples	65
Strain rate sensitivity behaviour of Fe–21Cr-1.5Ni–5Mn alloy and its constitutive modelling	65
Achieving the hardness-ductility balance of laser quenching process via thermal cycling	64
Surface plasmon resonance effect on charge transfer in Ag@Cu2O-rGO composites	64
The differential influence of biochar and graphite precursors on the structural, optical, and electrochemical properties of graphene oxide	64
Blue emitting fluorescent Cs2ZnCl4 perovskite nanoprobe for the sensing and visual detection of bilirubin-a jaundice biomarker	63
Exploring the multiferroic and water sensing behavior of Cu/Er co-substituted ferrites as key enablers for next-gen hydroelectric cells	62
Lanthanum-zinc mixed metal oxide as electrode material for supercapacitor applications	62
Designing a more efficient CsSnI3 based perovskite solar cell with novel bio-synthesized ZnO-NP as ETL	62
Cd2V2O7–ZnO mixed oxide for extended wavelength absorption with suppressed charge carrier recombination: A photocatalytic material	62
The impact of surfactants on the properties of electroless Ni–P–SiC coatings	61
New insights into the docking mechanism of 4-methylphenol adsorption on cow and human olfactory receptors: Molecular docking simulation statistical physics modeling	61
Photocatalytic reduction of CO2 over K2Ti6O13 films	61
A novel supplementary cementitious material based on calcined drill cuttings with waste glass to accelerate cement hydration	61
Combined electrochemical, atomic scale-DFT and MD simulation of Nickel based metal organic framework (Ni-MOF) as corrosion inhibitor for X65 pipeline steel in CO2- saturated brine	61
One-step synthesis of TiO2@MWCNT by plasma reactor for wastewater purification	61
Mechanical activation of anatase as a way to improve hexavalent chromium removal from solutions by the photoreduction and adsorption under near visible LED irradiation	60
The surface degradation and its impact on the magnetic properties of bulk VI3	60
Synergic effect of bio-enhanced cement with nano biomass silica and polycarboxylate ether: Enhancing strength and microstructure for sustainable construction	60
Investigating long term storage stability and drug release behavior of polypeptide based fibrous scaffold for tissue engineering application	59
An ultrasonic study of the effect of uniaxial green compaction pressure on the elastic anisotropy of porous copper fabricated using the pore-former route	59
Porous ceramics via 3D printing and emulsion templating	59
Hetero-valent cations-doped zinc stannate nanoparticles for optoelectronic and dielectric applications	59
A comparative study of the structural, vibrational, electronic and thermoelastic properties of α−SiO2 and α−Si(NH)2 from first principles	59
Enhanced ethanol sensing response of nanostructured Ce-doped CuO thin films	59
Revealing the structure and physical properties of Ba-based phosphide compounds: A theoretical study	58
The influence of micron-sized diamond particles on the hydrophobicity and hydrophobic durability of nickel-copper composite coatings	58
Multiwalled carbon nanotubes coated with twin-strengthened copper	58
The chloride anion doped hybrid perovskite quantum dots exchanged by short surfactant ligand enable color-tunable blue fluorescent emitting for QLEDs application	58
Surfactant assisted CuO/MCM-41 nanocomposite: Ultra efficient photocatalyst for degradation of methylene blue dye and inactivation of highly drug resistant bacteria	57
Simultaneously improved surface hardness and thermal diffusivity of carbon nanotube/zinc silicate composites via colloidal processing	57
Synthesis of Zr–Fe2O3/In2O3 photocatalyst by novel hydrothermal method for highly selective photo inhibition of pathogens, pollutant degradation and DPPH stabilization	57
Stable α-MoO3 nanocrystals and its doped variants with unique morphologies under optimized reaction conditions for efficient electrochemical and photochromic performances	57
Preparation and characterization of poly (lactic acid)-chitosan blend fibrous electrospun membrane loaded with bioactive glass nanoparticles for guided bone/tissue regeneration	56
Characterization of semiconductor properties and applications of Mg-doped ZnCo2O4 spinel-structured thin films	55
Influence of graphene oxide and carbon nanotubes on physicochemical properties of bone cements	55
Exploring the tunability of lead free Ba0.5Sn0.5TiO3 to mimic PbTiO3	55
A hybrid coating of organometallic complex with a silane coupling compound to protect galvannealed (GA) steel from white rust without sacrificing weldability	55
Thermal properties of stearic acid/active aluminum oxide/graphene nanoplates composite phase change materials for heat storage	55
Annealing effect on Dy: (GeSe2)80(In2Se3)20 thin films - Oscillator, dielectric, absorption and nonlinear parameters	54
Synthesis of a magneto-chromatic tunable Fe3O4-HPAM colloid	54
Novel 5-(2-phenylbenzo[b]thiophen-3-yl)furan-2-carbaldehyde based ovarian cancer carbohydrate antigen 125 electrochemical sensor	53
New anti-ferromagnetic tri-transition quaternary perovskites for magnetic cloaking and spintronic applications	53
Structural, dielectric and electrical characteristics of Bi3.9Sm0.1Ti3O12 ferroelectrics	52
Utilization of Na2CO3 for intermediate phase formation in vanadium-zircon pigment synthesis	52
Effect of minor Sc addition on high temperature tensile behavior of Al–7Zn–2Mg–2Cu–0.2Zr alloy	52

Non-enzymatic colorimetric sensing of nitrite in fortified meat using functionalized drug mediated manganese dioxide	52
Microstructure and defect evolution in oxygen ion-irradiated pure nickel – Insights from experimental probes and molecular dynamics simulations	52
Construction of RuSe2/MoOx hybrid and used as bi-functional electrocatalyst for overall water splitting	51
Enhanced optical properties of DNA-CTMA complex doped with [2.2]paracyclophane moieties	51
Synchrotron SAXS/WAXS and TEM studies of zinc doped natural hydroxyapatite nanoparticles and their evaluation on osteogenic differentiation of human mesenchymal stem cells	51
Low-temperature growth of nanocrystalline graphene on metal thin films	51
A novel approach for zero material loss (zero flash) and uniform cross-section during friction stir welding of dissimilar thickness Cu and Al alloys	50
Tool temperature thermographic study on end milling magnesium AZ31 using carbide tool	50
Quaternary ammonium ionene porous polymers via Menschutkin reaction of methylated polyethyleneimine and dibromoalkanes	49
Enantio-selective molecularly imprinted β-resorcylic acid-modified resin for chiral separation of cathinone	49
Investigation of Nearest Neighbor Interactions in Nickel Substituted Cobalt Using 59Co IFNMR	49
Insights into the carbon structure, thermal properties and environmental friendliness of composites produced using coal tar pitch and dimethylpolysiloxane as binders for coal waste	49
Investigation of glucose biosensors by non-enzymatic photoluminescent detection using oleic acid treated Ag2S nanoparticles	49
Magnetic properties of nano(iron oxide)-decorated graphene oxide	49
Elimination of NO3 - from water using Pd and PdCu catalysis supported on ZrO2–CeO2 materials: Effect of the support preparation	48
Texture control of pyrolytic carbon coatings and effects of coating thickness on the tensile properties of SiC fibers	48
Magnetoimpedance effect in NiFeP thin films deposited on Cu microwire through electrodeposition	48
Electrosprayed hierarchically porous microparticles with tunable morphology for selective dye adsorption	48
Structure and local structure investigation of (0.85-x)BaTiO3-0.15BiFeO3-xKVO3 system linked to electrical properties	48
Antithetic superhydrophobic/superhydrophilic surfaces formation by simple gas switching in an atmospheric-pressure cold plasma treatment	48
Functional properties and continuous adsorption process of Arenga pinnata shell and its porous biochars for aqueous methylene blue removal	47
Fabrication of cold sintered soft magnetic composites using oxalate coated iron powders	47
Theoretical insight into electronic and molecular properties of halogenated (F, Cl, Br) and hetero-atom (N, O, S) doped cyclooctane	47
Impact of boron doping on microporous carbon for enhancing the electrochemical sensitivity of vitamin D3	47
High-performance and ultra-sensitive ultraviolet photodetector based on surface passivated α-Fe2O3 thin film	47
A perspective of recent advances in PECVD-grown graphene thin films for scientific research and technological applications	47
Preparation and characterization of banana trunk activated carbon using H3PO4 activation: A rotatable central composite design approach	47
Effect of ZrB2 on microstructure and wear properties of TC4 alloy coatings by laser direct energy deposition	46
Thermomyces lanuginosus: A prospective thermophilic fungus for green synthesis and stabilization of BioAgNPs through glucoamylase	46
Investigation of tensile and fatigue properties of an austenitic stainless steel part fabricated by WAAM	46
Ionic liquid composites with garnet-type Li6.75Al0.25La3Zr2O12: Stability, electrical transport, and potential for energy storage applications	46
Template free zinc vanadate flower synthesis, characterization and efficiency for cetirizine-dihydrochloride degradation under UV light irradiation	46
Combating up of methyl violet dye from aquatic media via novel Ce@NiO@g-C3N4 nano-sorbent	46
Dopant inculcated ZnO based photoelectrodes for revitalizing photoelectrochemical water splitting	46
Surface functionalization of magnetic graphene oxide@bentonite with α-amylase enzyme as a novel bionanosorbent for effective removal of Rhodamine B and Auramine O dyes	45
The rising crack resistance curve behavior and mechanism of La2O3 doped zirconia toughened alumina composites prepared via vat photopolymerization based 3D printing	45
Fabrication and characterization of Zinc-xTitanium alloys by SPS for biodegradable implants: A comparative study on corrosion resistance and biological behavior	45
Post-deposition annealing effect on the structural and electrical properties of ytterbium oxide as an alternative gate dielectric	45
Surface modification of alloys by high-energy pulsed particle beams	45
Mechanical strengthening and micro-mechanical modelling of newly fabricated 7068-aluminium/lightweight-high-entropy-alloy as aero-material	44
Study of photo catalytical, antimicrobial activity, dielectric and ac impedance properties of Zn doped Mg nanoferrites synthesized from citrate gel auto combustion method	44
Interrelation between microstructures and mechanical properties under compression test and cytocompatibility study on Ti6AlxMo alloy for load-bearing implant applications	44
Corrosion behviour of micro-arc oxidized titanium in NaCl solution with H2O2 and albumin	44
Facile electrochemical determination of 5-fluorouracil as an important anti-cancer drug using CeO2–CuO nanocomposite modified carbon paste electrode	44
Three dimensional FeCo2O4 nanosheets for integrated all-solid-state supercapacitors and electrochemical energy-saving H2 production	44
Construction of a pH/Temperature dual-responsive drug delivery platform based on exfoliated MoS2 nanosheets for effective delivery of doxorubicin: Parametric optimization via central composite design	44
Effect of Al content on the microstructure and mechanical alloying behavior of AlCoCuMnNi and Al0.25CoCuMnNi high entropy powders	44
Study of structural, spectral, morphological and absorption properties Ba-Co-In-Fe-O system	44
Enhanced charge transfer and photocatalytic performance of cube-shaped Ag3PO4@Zeolite-A nanocomposite	43
Tailoring optical, dielectric, and magnetic properties of highly efficient visible-light LaFeO photocatalysts via Ca/Ba mono and Co-doping	43
The effect of rice straw derived microfibrillated cellulose as a reinforcing agent in starch/polyvinyl alcohol/polyethylene glycol biocompatible films	43
Study of optical properties of ZnS and MnZnS (ZnS/MnS) nanostructure thin films; Prepared by microwave-assisted chemical bath deposition method	43
TiO2@ZnFe2O4 heterojunctions for effecicent photocatalytic degradation of persistent pollutants and hydrogen evolution	43
Unraveling the potential of Gd doping on mullite BiFeO for fiber optic ethanol gas detection at room temperature	43
Facile modification method for the controlled synthesis of dumbbell-like gold nanoparticles (AuNDBs) for application in detecting glucose using the SERS method	43
Mesoporous Zn2SnO4 for efficient sensing of ethylene glycol vapor	43
Enhanced dielectric and electrical properties of PbS nanostructures facilely synthesized by low-cost chemical route: An effect of Ce doping concentrations	43
Simultaneous electrochemical determination of hydrazine and hydroxylamine on a thiadiazole derivative modified pencil graphite electrode	42
Comparative capacitive performance of MnSe encapsulated GO based nanocomposites for advanced electrochemical capacitor with rapid charge transport channels	42
Bifunctional electrocatalytic activity of two-dimensional multilayered vanadium carbide (MXene) for ORR and OER	42
High-temperature deformation behaviour of coarse-grained and fine-grained magnesium sheets: Insights from processing maps and constitutive modelling	42
Microstructure, hardness, thermal and wear behaviours in Al–10Ni/TiO2 composites fabricated by mechanical alloying	42
Study on the microstructure and properties of iron-based composites locally reinforced by in-situ submicron TiC particles	42
Study on denitration performance of mineral catalyst prepared by high energy ball milling of rare earth concentrate supported Fe2O3 for NH3-SCR	42
Highly sensitive and selective gas sensor based on SnO2/Fe2O3@rGO nanocomposite for detection of formaldehyde	42
Mono, dual and tri-doped TiO2: Sunlight photocatalytic, room temperature ferromagnetic and dielectric constant properties	41
Band-gap alteration of Zn2SnO4 nanostructures for optical and photo-luminescent applications	41
Improved Difenoconazole pesticide detection limit via double-sided porous silicon layers' electrical sensor	41
Fractal-like kinetics for enhanced boron adsorption on heterogeneous magnetic composite surfaces	41
Rice husk derived hierarchical porous carbon with lightweight and efficient microwave absorption	41
Plain and fretting fatigue characteristics of 16MnCr5 steel under cyclic bending loading with the application of engine piston pin	41
ZnO nanoflowers modified pencil graphite electrode for voltammetric DNA detection and investigation of Gemcitabine–DNA interaction	41
In-situ microwave synthesis of metal-organic framework-derived mesoporous polymorphic CoSe2@N-doped carbon for supercapacitor applications	41
Efficiently high energy storage density in Ba2+ ion modified K0·5Na0·5NbO3 (KNN) ferroelectric ceramics for super capacitors	41
Synthesis of reduced graphene oxide-molybdenum disulfide nanocomposite as potential scaffold for fabrication of efficient hydrazine sensor	41
Thermoluminescence investigations of Ca2Al2SiO7: Dy3+ phosphor for gamma dosimetry applications	40
Optimization of the architecture of lead-free CsSnCl3-perovskite solar cells for enhancement of efficiency: A combination of SCAPS-1D and wxAMPS study	40
Heterogeneous Cu–Sn-PPy mediated synergistic photo-Fenton and photothermal catalysis for dye elimination	40
The formation mechanism of in-situ TaC/Ni0.9Ta0.1 composites prepared by pressureless reactive sintering	40
Low-temperature growth of CdTe thin films as passivation layers for IR and THz functional elements	40

Transparent heat reflecting PVA/Cu/PVA photonic structures for energy saving smart windows	40
Microstructural analysis of inversion degree in sol-gel synthesized spinel MnCo2O4 particles	40
Structural-phase transformations and evolution of defect structure under thermal influence and hydrogenation of Cr-coated E110 zirconium alloy: Experimental research and first-principal calculations	40
Evaluation of multifunctional marine coatings enriched with organometallic biocides supported on ZSM-5 zeolite for biofouling prevention	40
Green synthesis based X-type Ba–Zn Hexaferrites: Their structural, Hysteresis, Mӧssbauer, dielectric and electrical properties	40
Effect of laser surface melting on microstructure and hardness of Mg–4Y–2Zn–1Zr-0.6Ca alloy	40
Cyclic (phenylene sulfide) treated carbon fiber for facile preparation of high performance PEEK based anti-wear composites	40
Fabrication of aqueous solid-state symmetric supercapacitors based on self-healable poly (acrylamide)/PEDOT:PSS composite hydrogel electrolytes	39
The effects of alloying elements on hydrogen-affected generalized stacking fault energy and dislocation behavior in nickel-based alloys	39
Photocatalytic activity of colloidal Bi–Si-based nanoparticles prepared by laser synthesis in liquid	39
Oxidation behaviour of microwave hybrid heating processed CoCrNiTiMo high entropy alloy cladding	39
Efficient antibacterial activity of ternary nanocomposites containing hydroxyapatite, Co3O4, and cerium oxide	39
Polyaniline-modified metal-organic frameworks for simultaneous sorption of UO22+ and ReO4− from water	39
Nanostructured MnMoO4 as a trifunctional electrocatalyst for overall water splitting and CO2 reduction	39
Permittivity measurements at high temperatures of selected pyrometallurgical minerals	38
Photocatalytic Hydrogen-Future Energy	38
The detection of ethanol vapors based on a p-type gas sensor fabricated from heterojunction MoS2–NiCo2O4	38
Nano Ni1-xCoxO system: Composition dependent phase evolution and electrochemical behaviour	38
Facile synthesis of Mn3O4–ZnO composite for photocatalytic dye removal and capacitive applications	38
The impact of heat treatment on the luminescence properties of Dy/Ag co-doped sodium alumina borate glasses	38
Ultramicroporous polyureas synthesized with amines and 1,1′-Carbonyldiimidazole and their CO2 adsorption	38
Multi-layer MgF2/ITO coatings for electromagnetic interference shielding	38
Porous graphitic carbon nitride nanosheets coated with polyfluorene for removal of Malachite green and Methylene blue dyes and Cu (II) ions	38
Development and characterization of antibacterial 3D porous hydroxyapatite-gelatin-PVA scaffolds containing zinc oxide nanoparticles	37
Effect of solution annealing temperature on the localised corrosion behaviour of a modified super austenitic steel produced in an open-air atmosphere	37
The incipient oxidation behaviors of Haynes 282 at high temperatures	37
Selenization-induced [001]-oriented Sb2Se3 film formation and its photo-sensing characteristics	37
Fabrication of intimately coupled CeO2/ZnFe2O4 nano-heterojunction for visible-light photocatalysis and bactericidal application	37
Amalgamated silica-glutaraldehyde based cost effective leather tanning agent and its sustainable benefits: A metal free collagen stabilisation	37
Interaction of intractable gaseous SO2 with new adsorbent—Metal organic frameworks: M-MOF-74 (M = Co, Ni, Zn)	37
Green synthesis of copper nanoparticles using aqueous extracts from Hyptis suaveolens (L.)	37
Analysis of microwave heating of copper powder compacts	37
Microstructure, mechanical, and wear characteristics of heat-treated aerospace-grade aluminium composite reinforced with HEA particles	37
Effect of current density on microstructure, mechanical behavior and corrosion resistance of black MAO coating on 6063 aluminum alloy	37
Corrosion mechanism and fatigue behavior of aluminum alloy with high silicon content	37
Magnetoelectric, physicochemical, and cytotoxicity evaluations of Fluorouracil decorated Gd doped Co nano ferrites	37
First-principles study of the interstitial stability and microscopic diffusion mechanism of hydrogen atom in Zr, Ti elemental and ZrTi2 alloys	37
Enhanced thermoluminescence intensity, stability, and sensitivity of the Yb3+ doped BaO–ZnO–LiF–B2O3 glass by Sm3+ co-doping	37
Enhanced simultaneous removal of direct red 81 and bisphenol A from aqueous media by coupling nano zero-valent iron (nZVI) particles with graphene oxide and copper: Isotherm and kinetic adsorption stu	37
Sensitive determination of hydroxylamine by using modified electrode by La2O3–Co3O4 nanocomposite and ionic liquid	37
Proficient visible-light-driven photocatalytic and anti-biofilm activity of biosynthesized CeO2-graphene oxide nanocomposites	37
Single crystal polarization-orientation Raman spectroscopy of zeolite LTA with confined S3− anions - High dielectric constant nanoporous material	36
Synthesis and characterization of Mo-doped PbS thin films for enhancing the photocatalytic hydrogen production	36
Studies on thermoelectric properties of sonochemically exfoliated MoS2	36
Development of porous hydroxyapatite/PVA/gelatin/alginate hybrid flexible scaffolds with improved mechanical properties for bone tissue engineering	36
Facile microwave synthesis of Zinc Ferrite@NCDs for photocatalytic degradation of fluoroquinolone antibiotics	36
Reduced graphene oxide-functionalized zinc oxide nanorods as promising nanocomposites for white light emitting diodes and reliable UV photodetection devices	36
Electrochemical performance of P4Se3 as high-capacity anode materials for monovalent and multivalent ion batteries	36
Study on the low Curie point positive temperature coefficient (PTC) material based on the conductive model	36
Enhanced adsorption and biosensing performance of adenine (C5H5N5) and guanine (C5H5N5O) nucleobases on the novel ZnO–MoSe2 nanosheets: A theoretical study	36
Facile synthesis of novel CoNi2S4/carbon nanofibers composite for high-performance supercapacitor	35
Hydrogen evolution performance of Ni loading on the carbon-based catalysts	35
Enhanced ionic conductivity and electrochemical stability in fluoride solid electrolyte K0.3Sn1.7F4.7	35
Zn-doped MnCe catalyst designed and applied for indoor low concentration formaldehyde removal and simultaneous antibacterial	35
Synthesis, crystal structure, and thermodynamic properties of two new selenate chlorides: M2Cu(SeO4)Cl2 with M = K and Rb	35
Variation in nanopillar surface on plasma-etched stainless steel owing to the crystal phase and composition	35
Effects of laser shock processing on the microstructure evolution and the oxidation behavior of TP347H austenitic steel in supercritical water environment	35
The metal anti-corrosion performance of light cured epoxy resin modified by zeolitic imidazolate frameworks (ZIF-8) with a core of polyaniline	35
Polystyrene waste-derived ion-exchange resins for water desalination	35
Solid-state green synthesis of two (1:1) organic intermolecular compounds; their physico-chemical, thermal, single crystal growth, and atomic packing studies	35
Carbon supported photocatalytic sponges for CO2 reduction and H2 production: Synthesis, properties, future directions	35
Preparation and properties of reactive plasma sprayed TiC–Ti5Si3–Ti3SiC2/Al coatings from Ti–Si–C–Al mixed powders	35
The influence of the synthesis method on Gd2O3 morpho-structural properties and sensitivity to CO2 under in-field conditions	35
Selenium nanospheres: Synthesis and evaluation as a potential anticancer, antimicrobial, and antioxidant agents	35
Magnetic polylactic acid-calcium phosphate-based biocomposite as a potential biomaterial for tissue engineering applications	35
+Development of a modified route for the preparation of BiVO4/ZrO2 composite with tuned heterojunction in it for efficient near-infrared solar reflectance	35
Direct synthesis of hollow carbon nanoonion-like particles (HCNOs) decorated uniformly with Sn nanoparticles by long-pulse-width millisecond laser ablation of Sn target in n-hexane solution	35
A new method to develop a NiRe-Al2O3 diffusion barrier between single crystal Ni-base superalloy and NiAl coating	35
Interfacial reactions in Ni/Se-90 at.%Te and Ni/Pb1-xSnxSe couples	35
A durable cobalt catalyst supported on Ni foam coated with Al2O3 for hydrogen generation from NaBH4 hydrolysis	34
Mesoporous NiFe2O4 nanorods functionalized Pt catalysts dictates highly sensing performance to acetone detection	34
Antibiofilm and enhanced antibiotic delivery by halloysite nanotubes architected dental implant against periodontitis	34
Investigating the dielectric characteristics, electrical conduction mechanisms, morphology, and structural features of mullite via sol-gel synthesis at low temperatures	34
Remarkable enhancement of graphene/Si Schottky junction solar cell performance with effective chemical treatments	34
First-principles study on sensing properties of Ni-decorated MoS2 with synergetic intrinsic defects towards dopamine molecule	34
Novel B-doped FeNi/C alloy nanofibers electrocatalyst for efficient oxygen evolution reaction from water splitting	34
Enhanced indigo carmine adsorption using ethylenediamine-modified MIL-101(Cr) materials	34
NiFe2O4 spinel ferrite and h-BN nanosheets coalescence for superior electrocatalytic oxygen evolution reaction	34
Dielectric investigation and material properties of almond gum thin films deposited by spray pyrolysis	34
Improved thermal stability and heat-aging resistance of silicone rubber via incorporation of UiO-66-NH2	33
Mott variable range hopping transport in thermal evaporated vanadyl 2, 3 naphthalocyanine thin films	33
Biogenically structural and morphological engineering of Trigonella foenum-graecum mediated SnO2 nanoparticles with enhanced photocatalytic and antimicrobial activities	33
Effect of pH on the removal of anionic and cationic dyes using zinc curcumin oxide nanoparticles as adsorbent	33
Flexible PET/(PET-TiO2) core/shell nanofibrous mats as potential photoanode layer for dye-sensitized solar cells, DSSCs	33
Photocatalytic degradation of organic dyes in water using semiconductor ZnO nanoparticles synthesized using Crataegus mexicana extract	33
Synergetic modulation of a hierarchical nanoflower-like NiMoO4/Ni(OH)2 composite toward efficient alkaline water oxidation	33
Role of 4d electrons in room temperature ferromagnetism, and thermoelectric properties of Sr2CrXO6 (X = Nb, Mo) for spintronic applications	33
Investigation of corrosion and wear resistance of PEO coated D16T aluminium alloys in the marine tropical climate conditions	33
Sliding wear performance of Al–Co alloys fabricated by vacuum arc melting and correlation with their microstructure	33
Compositional dependence of structural, physical, and, in particular, optical parameters of Se50–Te30Sn20Sb chalcogenide glassy systems	33
Lightweight and thermal insulation fabric-based composite foam for high-performance electromagnetic interference shielding	33
First-principle study of Mg-based rare earth spinels MgSm2Y4 (Y S, Se) for spintronic and thermoelectric devices	33
Enhancing electrochemical performance of Ni-rich cathodes for Li-ion batteries through spatial atomic layer deposition of ZnO coatings	33
The role of amino acid functionalization for improvement of adsorption Thioguanine anticancer drugs on the boron nitride nanotubes for drug delivery	33
Laser-powder bed fusion in-process dispersion of reinforcing ceramic nanoparticles onto powder beds via colloid nebulisation	33