OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Energy Resources Technology-Transactions of the Asme is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)

Article	Citations
Integrating Physical and Numerical Simulation of Horizontal Well Steam Flooding in a Heavy Oil Reservoir	78
Pore Permeability Model Based on Fractal Geometry Theory and Effective Stress	57
Prediction of the Engine Performance and Emission Characteristics of Glycine Max Biodiesel Blends With Nanoadditives and Hydrogen	56
Effects of Adiabatic Flame Temperature on Premixed Combustion Stability and Emission Characteristics of Swirl-Stabilized Oxy-Methane Flames	54
Stratified Flames in Dual Annular Counter-Rotating Swirl Burner for Wider Operability Gas Turbines	47
Evaluation of Multi-Functional Variable Refrigerant Flow System With Thermal Energy Storage and Photovoltaic-Based Distributed System for Net-Zero Energy Home Design	35
Theoretical Prediction of Laminar Burning Speed of Normal-Decane and Jet Propellant 8	34
A Robust Density-Based Approach to Production Data Analysis of Oil/Water Multiphase Flow System	32
Genetic Algorithm Optimization of Deep Structured Classifier-Predictor Models for Pressure Transient Analysis	30
Imprinted Glass Fiber-Reinforced Polymer Vascular Networks for Creating Self-Healing Wind Turbine Blades	28
Investigation on the Long-Term Stability of Multiple Salt Caverns Underground Gas Storage With Interlayers	26
Catalyzing Refuse-Derived Fuel Understanding: Quantified Insights From Thermogravimetric Analysis	25
Comparative Spray Atomization and Evaporation Characteristics of Dimethyl Ether and Mineral Diesel	25
Investigations on Thermodynamic Processes of a Novel Pneumatic Drive Asymmetric Gifford-McMahon Cycle Cryorefrigerator	24
Effect of Interfacial Tension on Relative Permeability Curves Obtained by Considering Surfactant Adsorption and Diffusion	24
Optimizing the Retrofit Design and Operation of Multi-Energy Systems Integrated With Energy Networks	23
Investigation of Sub-Grid Scale Turbulence-Radiation Interaction Effects on Turbulence Energy Transport and Varying Thermophysical Properties Using Large Eddy Simulation	22
Numerical Investigation on Thermal Performance in Low-Enthalpy Geothermal System Under the Impact of Anisotropic Reservoir Heterogeneity and Well Layout	21
Numerical Simulation of Diverting Fracturing for Staged Fracturing Horizontal Well in Shale Gas Reservoir	21
Anisotropic Vibration Characteristics Analysis of Steam Turbine Rotor Influenced by Steam Flow Excited Force Coupling Thermal and Dynamic Loads	20
Carbon Dioxide and Methane Sequestration in Organic-Rich Shales: Nanoscale Insights into Adsorption and Transport Mechanisms	19
Advances in Drilling and Completion Fluid Technologies for Protecting Oil and Gas Reservoirs: Research Progress and Development Trends	19
Artificial Neural Network Models for Octane Number and Octane Sensitivity: A Quantitative Structure Property Relationship Approach to Fuel Design	19
Thermochemical Co-Liquefaction of Fruit Pomace’s Blends in a Binary Solvent System Toward Value-Added Bioproducts	19
Energy Recovery of Expired Pistachios From Pyrolysis and CO2-Assisted Gasification	19

Effects of Accelerated Oxidation on Fuel Spray and Engine Characteristics of Karanja Biodiesel	17
Machine Learning Models for Acoustic Data Prediction During Drilling Composite Lithology Formations	17
Quantitative Comparison of Life Cycle Assessments of Advanced Recycling Technologies for End-of-Life Plastics	16
Wall Energy Loss and Entropy Generation in Solar Ponds Using One-Dimensional and Two-Dimensional Transient Analyses	16
Performance Enhancement Analysis of a Horizontal Axis Wind Turbine by Vortex Trapping Cavity	16
Experimental Research on Effects of Combustion Air Humidification on Energy and Environment Performance of a Gas Boiler	16
Influence of Inlet Mud Temperature on Bottom Hole Mud Temperature During Horizontal Well Drilling	16
Investigation of a Newly Developed Slotted Bladed Darrieus Vertical Axis Wind Turbine: A Numerical and Response Surface Methodology Analysis	15
Global Trends in Heavy Oil and Bitumen Recovery and In-Situ Upgrading: A Bibliometric Analysis During 1900–2020 and Future Outlook	15
Cost Optimization and Energy Management of a Microgrid Including Renewable Energy Resources and Electric Vehicles	15
Prediction of Short-Term Photovoltaic Power Via Self-Attention-Based Deep Learning Approach	15
Experimental Research of the Entire Wave System Inside a Wave Rotor Refrigerator and the Impact of Pressure Ratios on the Equipment Performance	15
An Investigation of the Impact of Combustion Chamber Geometry on Turbulent Burning Speeds in a Thermodynamic Model	14
Data-Driven Approach for Resistivity Prediction Using Artificial Intelligence	14
Experimental and Modeling Investigation on Gas-Liquid Two-Phase Flow in Horizontal Gas Wells	14
Multi-Objective Optimization of Lobed Enclosure for Wind Turbine Applications Using Gray Relation Analysis	14
Optimal Positioning of Small Wind Turbines Into a Building Using On-Site Measurements and Computational Fluid Dynamic Simulation	14
Optimization of Energy Efficiency in Smart Manufacturing Through the Application of Cyber–Physical Systems and Industry 4.0 Technologies	14
Wind Tunnel Probe Into an Array of Small-Scale Horizontal-Axis Wind Turbines Operating at Low Tip Speed Ratio Conditions	14
Geochemical Analysis of Hardness on the Adsorption of Surfactants in Carbonates Under Severe Thermodynamic Conditions: Surface Complexation Modeling Approach	13
Reviewer’s Recognition	13
A Novel Trajectory-Based Mechanistic Model for Predicting Solid Particle Erosion in Elbows	13
Evaluation of Heat Transfer Enhancement on Rotational Gas Turbine Blade Internal Cooling Channel With Dimpled Surface	13
Enhancing Performance of Small Capacity Horizontal Axis Wind Turbine Using Grooved Linearized-Chord Blades	13
Multi-Scale and Multi-Region Pore Structure Analysis on Sandy Conglomerate Whole Core With Digital Rock Model	12
Characterization of Carbon Dioxide Hydrate Growth Kinetics in Carbon Micron Tube Oil–Water System	12
Experimental Investigation of Preformed Particle Gel and Alkali-Surfactant-Polymer Composite System for Enhanced Oil Recovery in Heterogeneous Reservoirs	12
Comparison of Lost Circulation Material Sealing Effectiveness in Water-Based and Oil-Based Drilling Fluids and Under Conditions of Mechanical Shear and High Differential Pressures	12
Vacuum-Assisted Multistage Membrane Distillation With Bubble Column Dehumidifier for Efficient Water Production	12
Effect of Injection Pressure on Spray Cone and Penetration Angle for Enhanced Fuel Atomization of Various Blended Viscous Fluid: A Numerical Modeling	12
Structure Optimization and Performance Evaluation of Downhole Oil–Water Separation Tools: A Novel Hydrocyclone	12
Role of Oxidizer Mixture Composition on Stabilizing Stratified Oxy-Flames in Dual Lean Premixed Combustors for Gas Turbines	11
Investigating Different Fluids and Injection Patterns on the Effect of Reservoir Rock Quality Alteration due to Swelling and Migration of Clay Minerals at Carbonate Reservoirs	11
Generalized Analytical Well-Test Solutions for Vertically Fractured Wells in Commingled Reservoirs	11
Experimental Investigation of New Combustion Chamber Geometry Modification on Engine Performance, Emission, and Cylinder Liner Microstructure for a Diesel Engine	11
A Hybrid Response Surface Methodology and Multi-Criteria Decision Making Model to Investigate the Performance and Emission Characteristics of a Diesel Engine Fueled With Phenolic Antioxidant Additive	10
Relay Upgrading of Biomass Producer Gas Via Shift-Methanation Plus CO2 Adsorption in a Symbiotic Fixed-Bed Reactor: Concept Proposition and Numerical Visualization	10
Methanol/Ethanol/Butanol–Gasoline Blends Use in Transportation Engine—Part 2: Composition, Morphology, and Characteristics of Particulates	10
Trade-Off Study on Economy and Environmental Aspects of a Dual-Fuel Diesel Engine Using Diesel Additive and Producer Gas	10
An Evaluation of the Conversion of Gasoline and Natural Gas Spark Ignition Engines to Ammonia/Hydrogen Operation From the Perspective of Laminar Flame Speed	10
Design and Feasibility Study of Biomass-Driven Combined Heat and Power Systems for Rural Communities	10
Machine Learning-Based Digital Twins Reduce Seasonal Remapping in Aeroderivative Gas Turbines	10
Investigation of Burn Parameters and Cyclic Variations of a Spark Ignition Engine With Different Combustion Chambers	10
Sulfur Transformation and Metals Recovery During Co-Gasification of Municipal Solid Waste and Gypsum	10
Exploring the Impact of CO2 Atmosphere on Propane Moderate or Intense Low-Oxygen Dilution Combustion: A Numerical Simulation Study	10
Numerical Simulation on Combustion Characteristics of Methane–Air Premixed Flame Impacted by Hydrogen Jet	10
A Novel Upscaling Method for Evaluating Mechanical Properties of the Shale Oil Reservoir Based on Cluster Analysis and Nanoindentation	10
A Data-Driven Proxy Modeling Approach Adapted to Well Placement Optimization Problem	10
Investigation of Influential Parameters on Oil/Water Interfacial Tension During Low-Salinity Water Injection	10
Analysis and Application of a New Hybrid Drill Bit for Use in Hard Rocks	9

Multi-Objective Optimization of Parallel-Connected Double-Effect Mechanical Vapor Recompression System Based on Genetic Algorithm	9
Design and Cost Study of Improved Scaled-Up Centrifugal Particle Receiver Based on Simulation	9
Effects of Injection Sequences on Spray Characteristics of an Air-Assisted Atomizer for Two-Stroke Aviation Engines	9
Assessment of the Engine Vibration and Noise Characteristics of an Unmodified Direct Injection Engine Powered With Non-Feedstock Citrullus lanatus Seed Oil	9
Numerical Simulation Study on Boiler Combustion Characteristics With Different Volume Fraction of Ventilation Air Methane	9
Thermodynamic Correlation of the Entropy of Bose–Einstein Condensation Transition to the Lambda Points of Superfluids	9
A Theoretical Model to Predict Contact Electrification	9
A New Method for Calculating the Inflection Point Temperature of Heavy-Oil Rheology Transforming From Non-Newton Fluid into the Newton Fluid	9
Development of a Model Efficiency Improvement for the Designing of Feedwater Heaters Network in Thermal Power Plants	9
Maintenance Strategy of a Preheat Train of a Crude Oil Distillation Unit Based on Exergy and Exergoeconomic Analysis	9
Numerical Investigation on the n-Heptane Spray Flame at Hydrous Ethanol Premixed Condition	9
Numerically Optimized Ejector Geometry for Ejector Refrigeration Systems With Low-Global Warming Potential Working Fluids	9
Performance of Two-Dimensional Functionally Graded Anode Supported Solid-Oxide Fuel Cells	9
Transient Analysis of a Supercritical Carbon Dioxide Air Cooler Using IDAES	9
Statistical Methods to Improve the Quality of Real-Time Drilling Data	9
An Unsupervised Machine Learning Based Double Sweet Spots Classification and Evaluation Method for Tight Reservoirs	9
Study of Sooting Propensity and Related Indices Based on Tests With Isolated Droplets	9
Study on the Main Controlling Factors and Formation Mechanism of Motion States of Bottom Hole Assembly in Slightly Deviated Wells	9
Comprehensive Effects of Polymer Flooding on Oil–Water Relative Permeabilities	9
Particles Transportation and Deposition Behavior During Horizontal Wellbore Exploitation	9
Effect of the J-Shaped Wind Turbine Airfoil Opening Ratio and Thickness on the Performance of Symmetrical Airfoils	9
Development of Digital Twins for Drilling Fluids: Local Velocities for Hole Cleaning and Rheology Monitoring	9
Analysis of Ultimate Gas Recovery in Shale Reservoirs	9
Influence of Axial Distance and Duct Angle in the Improvement of Power Generation in Duct Augmented Wind Turbines	9
Prediction of Waste Chicken Fat Biodiesel Blends as the Potential Substitute for the Diesel Engine With Oxygenated Additives	9
Modeling of Optimal Power Generation in Small Hydropower Plants	8
Study on Chemical Kinetic Mechanism and Autoignition Characteristics of Isopentanol/Gasoline Surrogate Fuel	8
Evaluating the Effectiveness of Machine Learning Technologies in Improving Real-Time Drilling Data Quality	8
Small-Scale Toroidal Fluidized Bed Gasification System: Development and Experimental Aspects	8
Impact of Integration of the Production Systems and Reservoir of a Benchmark Based on Carbonate Fields	8
Exergoeconomic Analysis and Tri-Objective Optimization of the Allam Cycle Co-Fired by Biomass and Natural Gas	8
Assessment of Combustion and Acoustic Characteristics of Scenedesmus dimorphus Blended With Hydrogen Fuel on Internal Combustion Engine	8
Thermoelectric Generation From Exhaust Heat in Electrified Natural Gas Trucks: Modeling and Analysis of an Integrated Engine System Performance Improvement	8
Energy Conversion Efficiency of Thermoelectric Power Generators With Cylindrical Legs	8
Employing Deep Learning Neural Networks for Characterizing Dual-Porosity Reservoirs Based on Pressure Transient Tests	8
Design and Performance Analysis of a Solar-Coal-Fired Complementary Power System Based on the S-CO2 Brayton Cycle	8
Flow-Independent Liquid Jet-in-Crossflow Injection Using Physical Obstructions	8
Large Eddy Simulation of the Layout Effects on Wind Farm Performance Coupling With Wind Turbine Control Strategies	8
Experimental Bench-Scale Study on Cuttings-Bed Erosion in Horizontal Wells	8
Analysis, Comparison, and Discussion on the Utilization of the Existing Slug Liquid Holdup Models to Predict the Horizontal Gas-Liquid Plug-to-Slug Flow Transition	8
Investigation of Hydraulic Conditions and Shape of Flip Bucket Spillways on Cavitation Phenomenon by Considering Dynamic Pressures	8
Development of Thermal Energy Storage Material From Blends of Jatropha Biodiesel and Paraffin Wax for Augmenting Freshwater Generation Capacity in a Solar Desalination System	8
Correlating the Influence of the Purity of Hydrogen Produced by a Surplus Power on the Production of Green Ammonia	8
Infrared Experimental Investigations of the Effects of Direct Water Injection in an Optical Engine	8
Analysis of Low- and High-Temperature Heat Release in Dual-Fuel RCCI Engine and Its Relationship With Particle Emissions	7
Mitigating Interwell Fracturing Interference: Numerical Investigation of Parent Well Depletion Affecting Infill Well Stimulation	7
Contemporary Problems of Thermal Engineering (CPOTE2022)	7
Predictive Machine Learning Model for Bottom Hole Flowing and Average Formation Pressure in Underground Gas Storage	7
Measurement and Analysis of Power Losses in Sintered Cores for Power Electronic Devices in Renewable Energy Systems	7
Effects of Orifice Diameter of Pre-Chamber Jet Ignition on the Combustion Characteristics and Pressure Oscillations in a Kerosene-Fueled Engine	7
Computational Optimization of a Spark Ignition Engine Fueled With Biomass-Derived Syngas	7
Enhancement of Radiative Power Using a Divergent Splitter Plate Design in H2–Air Non-Premixed Micro-Combustor	7
Shock Tube and Flame Speed Measurements of 2,4,4-Trimethyl-1-Pentene: A Co-Optima Biofuel	7
Investigation of Thermal Radiation, Atomization Air, and Fuel Temperature Effects on Liquid Fuel Combustion	7
A Hybrid Approach Using Design of Experiment and Artificial Neural Network in a Camless Heavy-Duty Engine	7
Hydrogen Gas Refueling Infrastructure for Heavy-Duty Trucks: A Feasibility Analysis	7
Flame Spread Pulsation Characteristics of Transformer Oil Vertical Spill Fire	7
Physics-Informed Deep Learning-Based Proof-of-Concept Study of a Novel Elastohydrodynamic Seal for Supercritical CO2 Turbomachinery	7
How to Cover Additional Cooling Load Needs During COVID-19 Pandemic?	7
Analyzing the Multiscale Impacts of Implementing Energy-Efficient HVAC Improvements Through Energy Audits and Economic Input–Output Analysis	7
An Approach to Capturing Residual Energy From the Subway System: Methodological Considerations	7
A Comparative Study of Multi-Stage Approaches for Wind Farm Layout Optimization	7
Investigation on Flame and Spray Characteristics of Butanol and Lemon Peel Oil Blends With Gasoline Using Optical Engine	7
Performance Improving of Wind Power Generation Systems Through Parameter Optimization and Dynamic Analysis of the Speed-Regulating Differential Transmission	7
Theoretical Evaluation of YSZ and Alumina-YSZ Thermal Barrier Coatings in a Hydrogen Enriched Combustion Environment	7
Nanofluids and Nanocomposite Membranes for Enhanced CO2 Capture: A Comprehensive Review	7
A Numerical Analysis of Radio Frequency Heating of Coal With Different Ranks	7
Techno-Economic Impact Assessments of Energy Efficiency Improvements in the Industrial Combustion Systems	7
Effects of Adiabatic Flame Temperature and Oxygen Concentration in CH4/N2/O2 Nonswirl Jet Flames: Experimental and Numerical Study	7
Characterization of Annular Cement Permeability of a Logged Well Section Using Pressure–Pulse Decay Measurements	7
A Comparative Study of Thermal, Luminous, and Infrared Radiation Characteristics of Natural gas Flame in the Presence of Alkali, Alkali-Earth, and Transition Metallic Solution Additives	7
Dynamic Characteristics and Experimental Research of Dual-Piston Axial Oscillation Drag Reduction Tool	7
Decarbonizing the Fertilizers Sector: An Alternative Pathway for Urea and Nitric Acid Production	7