Journal of Energy Resources Technology-Transactions of the Asme

Article	Citations
Prediction of the Engine Performance and Emission Characteristics of Glycine Max Biodiesel Blends With Nanoadditives and Hydrogen	60
Effects of Adiabatic Flame Temperature on Premixed Combustion Stability and Emission Characteristics of Swirl-Stabilized Oxy-Methane Flames	59
Catalyzing Refuse-Derived Fuel Understanding: Quantified Insights From Thermogravimetric Analysis	59
Stratified Flames in Dual Annular Counter-Rotating Swirl Burner for Wider Operability Gas Turbines	33
Theoretical Prediction of Laminar Burning Speed of Normal-Decane and Jet Propellant 8	32
A Robust Density-Based Approach to Production Data Analysis of Oil/Water Multiphase Flow System	31
Genetic Algorithm Optimization of Deep Structured Classifier-Predictor Models for Pressure Transient Analysis	31
Integrating Physical and Numerical Simulation of Horizontal Well Steam Flooding in a Heavy Oil Reservoir	29
Evaluation of Multi-Functional Variable Refrigerant Flow System With Thermal Energy Storage and Photovoltaic-Based Distributed System for Net-Zero Energy Home Design	27
Investigation on the Long-Term Stability of Multiple Salt Caverns Underground Gas Storage With Interlayers	25
Pore Permeability Model Based on Fractal Geometry Theory and Effective Stress	25
Comparative Spray Atomization and Evaporation Characteristics of Dimethyl Ether and Mineral Diesel	23
Thermochemical Co-Liquefaction of Fruit Pomace’s Blends in a Binary Solvent System Toward Value-Added Bioproducts	22
Anisotropic Vibration Characteristics Analysis of Steam Turbine Rotor Influenced by Steam Flow Excited Force Coupling Thermal and Dynamic Loads	22
Artificial Neural Network Models for Octane Number and Octane Sensitivity: A Quantitative Structure Property Relationship Approach to Fuel Design	22
Investigation of Sub-Grid Scale Turbulence-Radiation Interaction Effects on Turbulence Energy Transport and Varying Thermophysical Properties Using Large Eddy Simulation	22
Carbon Dioxide and Methane Sequestration in Organic-Rich Shales: Nanoscale Insights into Adsorption and Transport Mechanisms	21
Effect of Interfacial Tension on Relative Permeability Curves Obtained by Considering Surfactant Adsorption and Diffusion	21
Numerical Simulation of Diverting Fracturing for Staged Fracturing Horizontal Well in Shale Gas Reservoir	20
Advances in Drilling and Completion Fluid Technologies for Protecting Oil and Gas Reservoirs: Research Progress and Development Trends	17
Optimizing the Retrofit Design and Operation of Multi-Energy Systems Integrated With Energy Networks	17
Effects of Accelerated Oxidation on Fuel Spray and Engine Characteristics of Karanja Biodiesel	17
Experimental Research on Effects of Combustion Air Humidification on Energy and Environment Performance of a Gas Boiler	17
Numerical Investigation on Thermal Performance in Low-Enthalpy Geothermal System Under the Impact of Anisotropic Reservoir Heterogeneity and Well Layout	17
Energy Recovery of Expired Pistachios From Pyrolysis and CO2-Assisted Gasification	17

Experimental Research of the Entire Wave System Inside a Wave Rotor Refrigerator and the Impact of Pressure Ratios on the Equipment Performance	16
Influence of Inlet Mud Temperature on Bottom Hole Mud Temperature During Horizontal Well Drilling	16
Quantitative Comparison of Life Cycle Assessments of Advanced Recycling Technologies for End-of-Life Plastics	16
Experimental and Modeling Investigation on Gas-Liquid Two-Phase Flow in Horizontal Gas Wells	16
Global Trends in Heavy Oil and Bitumen Recovery and In-Situ Upgrading: A Bibliometric Analysis During 1900–2020 and Future Outlook	16
Investigation of a Newly Developed Slotted Bladed Darrieus Vertical Axis Wind Turbine: A Numerical and Response Surface Methodology Analysis	15
Cost Optimization and Energy Management of a Microgrid Including Renewable Energy Resources and Electric Vehicles	15
Experimental Investigation of Preformed Particle Gel and Alkali-Surfactant-Polymer Composite System for Enhanced Oil Recovery in Heterogeneous Reservoirs	15
Multi-Objective Optimization of Lobed Enclosure for Wind Turbine Applications Using Gray Relation Analysis	15
An Investigation of the Impact of Combustion Chamber Geometry on Turbulent Burning Speeds in a Thermodynamic Model	14
A Novel Trajectory-Based Mechanistic Model for Predicting Solid Particle Erosion in Elbows	14
Enhancing Performance of Small Capacity Horizontal Axis Wind Turbine Using Grooved Linearized-Chord Blades	13
Multi-Scale and Multi-Region Pore Structure Analysis on Sandy Conglomerate Whole Core With Digital Rock Model	13
Effect of Injection Pressure on Spray Cone and Penetration Angle for Enhanced Fuel Atomization of Various Blended Viscous Fluid: A Numerical Modeling	13
Evaluation of Heat Transfer Enhancement on Rotational Gas Turbine Blade Internal Cooling Channel With Dimpled Surface	13
Optimal Positioning of Small Wind Turbines Into a Building Using On-Site Measurements and Computational Fluid Dynamic Simulation	13
Characterization of Carbon Dioxide Hydrate Growth Kinetics in Carbon Micron Tube Oil–Water System	12
Comparison of Lost Circulation Material Sealing Effectiveness in Water-Based and Oil-Based Drilling Fluids and Under Conditions of Mechanical Shear and High Differential Pressures	12
Investigating Different Fluids and Injection Patterns on the Effect of Reservoir Rock Quality Alteration due to Swelling and Migration of Clay Minerals at Carbonate Reservoirs	12
Geochemical Analysis of Hardness on the Adsorption of Surfactants in Carbonates Under Severe Thermodynamic Conditions: Surface Complexation Modeling Approach	12
Exploring the Impact of CO2 Atmosphere on Propane Moderate or Intense Low-Oxygen Dilution Combustion: A Numerical Simulation Study	12
A Novel Upscaling Method for Evaluating Mechanical Properties of the Shale Oil Reservoir Based on Cluster Analysis and Nanoindentation	11
Structure Optimization and Performance Evaluation of Downhole Oil–Water Separation Tools: A Novel Hydrocyclone	11
Assessment of the Engine Vibration and Noise Characteristics of an Unmodified Direct Injection Engine Powered With Non-Feedstock Citrullus lanatus Seed Oil	11
A Data-Driven Proxy Modeling Approach Adapted to Well Placement Optimization Problem	11
Relay Upgrading of Biomass Producer Gas Via Shift-Methanation Plus CO2 Adsorption in a Symbiotic Fixed-Bed Reactor: Concept Proposition and Numerical Visualization	11
Numerical Simulation on Combustion Characteristics of Methane–Air Premixed Flame Impacted by Hydrogen Jet	11
Investigation of Burn Parameters and Cyclic Variations of a Spark Ignition Engine With Different Combustion Chambers	11
An Evaluation of the Conversion of Gasoline and Natural Gas Spark Ignition Engines to Ammonia/Hydrogen Operation From the Perspective of Laminar Flame Speed	10
A Hybrid Response Surface Methodology and Multi-Criteria Decision Making Model to Investigate the Performance and Emission Characteristics of a Diesel Engine Fueled With Phenolic Antioxidant Additive	10
Multi-Objective Optimization of Parallel-Connected Double-Effect Mechanical Vapor Recompression System Based on Genetic Algorithm	10
Maintenance Strategy of a Preheat Train of a Crude Oil Distillation Unit Based on Exergy and Exergoeconomic Analysis	10
Vacuum-Assisted Multistage Membrane Distillation With Bubble Column Dehumidifier for Efficient Water Production	10
Sulfur Transformation and Metals Recovery During Co-Gasification of Municipal Solid Waste and Gypsum	10
Study on the Main Controlling Factors and Formation Mechanism of Motion States of Bottom Hole Assembly in Slightly Deviated Wells	10
Generalized Analytical Well-Test Solutions for Vertically Fractured Wells in Commingled Reservoirs	10
Role of Oxidizer Mixture Composition on Stabilizing Stratified Oxy-Flames in Dual Lean Premixed Combustors for Gas Turbines	10
Experimental Investigation of New Combustion Chamber Geometry Modification on Engine Performance, Emission, and Cylinder Liner Microstructure for a Diesel Engine	10
Study of Sooting Propensity and Related Indices Based on Tests With Isolated Droplets	10
Prediction of Waste Chicken Fat Biodiesel Blends as the Potential Substitute for the Diesel Engine With Oxygenated Additives	9
Particles Transportation and Deposition Behavior During Horizontal Wellbore Exploitation	9
Experimental Bench-Scale Study on Cuttings-Bed Erosion in Horizontal Wells	9
Development of Digital Twins for Drilling Fluids: Local Velocities for Hole Cleaning and Rheology Monitoring	9
Investigation of Hydraulic Conditions and Shape of Flip Bucket Spillways on Cavitation Phenomenon by Considering Dynamic Pressures	9
Development of Thermal Energy Storage Material From Blends of Jatropha Biodiesel and Paraffin Wax for Augmenting Freshwater Generation Capacity in a Solar Desalination System	9
Analysis and Application of a New Hybrid Drill Bit for Use in Hard Rocks	9
Transient Analysis of a Supercritical Carbon Dioxide Air Cooler Using IDAES	9
Thermoelectric Generation From Exhaust Heat in Electrified Natural Gas Trucks: Modeling and Analysis of an Integrated Engine System Performance Improvement	9
Analysis of Ultimate Gas Recovery in Shale Reservoirs	9
Small-Scale Toroidal Fluidized Bed Gasification System: Development and Experimental Aspects	9

Assessment of Combustion and Acoustic Characteristics of Scenedesmus dimorphus Blended With Hydrogen Fuel on Internal Combustion Engine	9
Effects of Injection Sequences on Spray Characteristics of an Air-Assisted Atomizer for Two-Stroke Aviation Engines	9
An Unsupervised Machine Learning Based Double Sweet Spots Classification and Evaluation Method for Tight Reservoirs	9
Thermodynamic Correlation of the Entropy of Bose–Einstein Condensation Transition to the Lambda Points of Superfluids	9
Numerically Optimized Ejector Geometry for Ejector Refrigeration Systems With Low-Global Warming Potential Working Fluids	9
Modeling of Optimal Power Generation in Small Hydropower Plants	9
Analysis, Comparison, and Discussion on the Utilization of the Existing Slug Liquid Holdup Models to Predict the Horizontal Gas-Liquid Plug-to-Slug Flow Transition	9
Study on Chemical Kinetic Mechanism and Autoignition Characteristics of Isopentanol/Gasoline Surrogate Fuel	9
Physics-Informed Deep Learning-Based Proof-of-Concept Study of a Novel Elastohydrodynamic Seal for Supercritical CO2 Turbomachinery	8
Dynamic Characteristics and Experimental Research of Dual-Piston Axial Oscillation Drag Reduction Tool	8
Computational Optimization of a Spark Ignition Engine Fueled With Biomass-Derived Syngas	8
Investigation on Flame and Spray Characteristics of Butanol and Lemon Peel Oil Blends With Gasoline Using Optical Engine	8
Performance Improving of Wind Power Generation Systems Through Parameter Optimization and Dynamic Analysis of the Speed-Regulating Differential Transmission	8
Enhancement of Radiative Power Using a Divergent Splitter Plate Design in H2–Air Non-Premixed Micro-Combustor	8
An Approach to Capturing Residual Energy From the Subway System: Methodological Considerations	8
Effects of Orifice Diameter of Pre-Chamber Jet Ignition on the Combustion Characteristics and Pressure Oscillations in a Kerosene-Fueled Engine	8
Shock Tube and Flame Speed Measurements of 2,4,4-Trimethyl-1-Pentene: A Co-Optima Biofuel	8
Effects of Adiabatic Flame Temperature and Oxygen Concentration in CH4/N2/O2 Nonswirl Jet Flames: Experimental and Numerical Study	8
Correlating the Influence of the Purity of Hydrogen Produced by a Surplus Power on the Production of Green Ammonia	8
Analyzing the Multiscale Impacts of Implementing Energy-Efficient HVAC Improvements Through Energy Audits and Economic Input–Output Analysis	8
Exergoeconomic Analysis and Tri-Objective Optimization of the Allam Cycle Co-Fired by Biomass and Natural Gas	8
Decarbonizing the Fertilizers Sector: An Alternative Pathway for Urea and Nitric Acid Production	8
Optimal Energy Scheduling of Microgrid With Electric Vehicles Based on Electricity Market Price	7
Flame Spread Pulsation Characteristics of Transformer Oil Vertical Spill Fire	7
A Numerical Analysis of Radio Frequency Heating of Coal With Different Ranks	7
Mitigating Interwell Fracturing Interference: Numerical Investigation of Parent Well Depletion Affecting Infill Well Stimulation	7
Study on the Influence of Tripping Operation on Annular Transient Surge-Swab Pressure of Herschel–Bulkley Fluid	7
Film Cooling in the Cutback for Trailing Edge With Different Incident Angles	7
Research on the Emission Characteristics of a Passenger Car Powered by Ethanol, Methanol, and Liquefied Petroleum Gas Under Real-World Running Conditions	7
Experimental and Mechanistic Characterizations of Oil-Based Cement Slurry Flow Behavior Through Fractures in a Carbonate Reservoir	7
Theoretical Evaluation of YSZ and Alumina-YSZ Thermal Barrier Coatings in a Hydrogen Enriched Combustion Environment	7
Investigation of Thermal Radiation, Atomization Air, and Fuel Temperature Effects on Liquid Fuel Combustion	7
Predictive Machine Learning Model for Bottom Hole Flowing and Average Formation Pressure in Underground Gas Storage	7
Research on the Main Controlling Factors for Injection and Production Allocation of Polymer Flooding	7
Characterization of Surfactant Adsorption Profile in Carbonates Under Severe Reservoir Conditions With Geochemical Modeling Approach	7
Optimal Operation of Integrated Energy Systems Based on Multi-Energy Coupling With Power-to-Gas Technology	7
Performance Optimization and Techno-Economic Analysis of an Organic Rankine Cycle Powered by Solar Energy	7
Contemporary Problems of Thermal Engineering (CPOTE2022)	7
Fatigue-Life Estimation of Vertical-Axis Wind Turbine Composite Blades Using Modal Analysis	7
Nanofluids and Nanocomposite Membranes for Enhanced CO2 Capture: A Comprehensive Review	7
Improving the Rheological and Mechanical Properties of Oil Well Cement Slurries Using Multiple Chemical Admixtures for Enhancing Zonal Isolation: A Laboratory Evaluation	7
Analytical Method for Production Forecasting During Boundary-Dominated Flow in Unconventional Volatile Oil Reservoirs Using Single-Phase Analogy	7
Flowing Heating System for Pipeline of Electromagnetic Coupling of Power Frequency Without the Iron Core and Its Structure Optimization	7
A Hybrid Approach Using Design of Experiment and Artificial Neural Network in a Camless Heavy-Duty Engine	7
Breaking Mechanism and Performance of Coal Subjected to Water Jets Under High In Situ Stress	6
Modeling of Wind Power Plants and Their Impact on Economic and Environmental Development	6
Brief Review of Recent Achievements in the Flamelet Manifold Selection and Probability Density Distribution for Flamelet Manifold Variables	6
Integrated Optimization of Hybrid Steam-Solvent Processes in a Post-CHOPS Reservoir with Consideration of Wormhole Networks	6
Downdraft Gasification for Biogas Production: The Role of Artificial Intelligence	6
Parametric Analysis and Design of a Power Plant to Recover Low-Grade Heat From Data Center Electronics by Using Liquid Nitrogen	6
Exploring the Limits of Empirical Correlations for the Design of Energy Systems With Complex Fluids: Liquid Sulfur Thermal Energy Storage as a Case Study	6
A Photoconductance Mechanism for Oil Shale Pyrolysis Process Detection	6
A Semi-Analytical Rate-Transient Analysis Model for Fractured Horizontal Well in Tight Reservoirs Under Multiphase Flow Conditions	6
Primary Investigation of Ilmenite Dosage Effect on the Water-Based Drilling Fluid Properties	6
Novel Organobimetallic Liquid Catalyst for Enhancing Oil Recovery in Sand-Pack Columns	6
Advancements and Challenges in Integrating Renewable Energy Sources Into Distribution Grid Systems: A Comprehensive Review	6
Temperature Response Characteristics of the Production Profile for Multilayered Gas Wells Based on Distributed Temperature Sensing Monitoring	6
Experimental Investigation on Physicochemical and Wetting Characteristics of Modified Gas Coal: Effects of Multicomponent Acids and Surfactant	6
An Efficient Infill Well Placement Optimization Approach for Extra-Low Permeability Reservoir	6
Influence of Aluminum Content and Agglomerates Initial Velocity on Erosion in Solid Rocket Motor	6
Modeling and Parameter Identification of Spark Plug Deposit Formation Mechanism for Different Fuel/Lubricant Combination	6
A Numerical Study on Spray Combustion and Emissions Characteristics of n-Heptane, Dimethyl Ether, and Their Blends in a Constant Volume Combustion Chamber	6
Resistive Heating Catalytic Micro-Reactor for Process Intensified Fuel Reforming to Hydrogen	6
Assessing Hydrogen–Ammonia Ratios to Achieve Rapid Kernel Inception in Spark-Ignition Engines	6
Performance Analysis of Evaporation and Heat Wheel-Based Building Air Conditioning Systems	6
Heat Transfer Augmentation With Multiple Jet Impingement Cooling on Dimpled Surface for Gas Turbine Blades	6
Automatic Well Test Interpretation Method for Circular Reservoirs With Changing Wellbore Storage Using One-Dimensional Convolutional Neural Network	6
Pressure Drop Prediction Model of the Gas-Liquid Stratified Flow Development Section in the Horizontal Pipeline	5
Modeling the Mechanism of Water Flux in Fractured Gas Reservoirs With Edge Water Aquifers Using an Embedded Discrete Fracture Model	5
Modeling and Influence Factors Analysis of Refueling Emissions for Plug-In Hybrid Electric Vehicles	5
Effects of a Self-Pressurized Injection Strategy on the Formation of a Stratified Mixture and the Combustion of an Aviation Kerosene Piston Engine	5
Experimental and Numerical Evaluation of Enzyme-Assisted Hot Waterflooding Performance for Heavy Oil Reservoirs	5
Erratum: “Potential of Integrating Solar Energy Into Systems of Thermal Power Generation, Cooling-Refrigeration, Hydrogen Production, and Carbon Capture” [ASME J. Energy Resour. Technol., 2023,	5
Investigating the Effects of H, CH3, and C2H5 Radicals on the Kinetics of Ignition for Methane/Air Mixtures	5
Prediction of Liquid Holdup in Horizontal Gas Wells Based on Dimensionless Number Selection	5
Exploring the Effects of Guide Vane on Dimpled Cooling Channel of Gas Turbine Blade	5
Review on the Interaction Mechanism of Nitrogen/Sulfur Pollutants During Fuel Combustion	5
Influence of Overburden Pressure on Imbibition Behavior in Tight Sandstones Using Nuclear Magnetic Resonance Technique	5
Helical Fins for Concentrated Solar Receivers: Design Optimization and Entropy Analysis	5
Motion Simulation Analysis and Experimental Verification of Drill String Rotation Controller	5

Data-Driven Inversion-Free Workflow of Well Performance Forecast Under Uncertainty for Fractured Shale Gas Reservoirs	5
Impact of Creep Effect on Hydraulic Fracture Long-Term Conductivity in Deep Shale Reservoirs	5
Effect of Deflector on the Combustion Characteristics of a Micro-Combustor With a Controlled Centrally Slotted Bluff Body	5
Effect of Hematite Dosage on Water-Based Drilling Fluid and Filter Cake Properties	5
Numerical Investigation of Equivalence Ratio Effects on a Converted Diesel Engine Using Natural Gas	5
Artificial Intelligence for Thermal Energy Storage Enhancement: A Comprehensive Review	5
Integration of Dynamic Models and Virtual Reality for the Training of Steam Generator Operators	5
Conceptual Design of Experimental Test Rig for Research on Thermo-Flow Processes During Direct Contact Condensation in the Two-Phase Spray-Ejector Condenser	4
Retrofitting Natural Gas–Fired Boiler for Hydrogen Combustion: Operational Performance and NOx Emissions	4
Dynamic Analysis of Downhole Tool String in Uplift and Downshoot Motion	4
Elliptical Bladed Savonius Rotor for Wind Energy: Efficacy of RANS Modeling for Flow Characteristics	4
Feasibility Analysis of a Fuel Cell-Based Tri-Generation Energy System Via the Adoption of a Multi-Objective Optimization Tool	4
Construction Parameters Optimization of CO2 Composite Fracturing for Horizontal Shale Wells	4
Atomization Characteristics of Low-Volatility Heavy Fuel for Low-Pressure Direct Injection Aviation Piston Engines	4
Spray Autoignition Study of Bio-Oxygenated Additives Blended With Aviation Kerosene Under Engine-Like Cold-Start Conditions	4
The Burning Characteristics of Transformer Oil Spill Fire on Horizontal and Inclined Substrate Under Continuous Leakage Condition	4
Influence of Reynolds Number on Aerodynamic and Performance Coefficients of a Novel Parabolic-Bladed Savonius Wind Rotor	4
Effect of CH4 Addition on Soot Formation in C2H4 Diffusion Flame	4
Numerical Simulation of Biogas Combustion by Using a Finite Volume Based-Multispecies Transport Model	4
Machine-Learning-Based Hydraulic Fracturing Flowback Forecasting	4
Fatty Acid Ethyl Esters Obtained From Safflower Oil: A Fully Renewable Biofuel	4
An empirical and CFD analysis of combustion performance of a diesel engine fueled with tomato seed oil biodiesel	4
Experimental Study on the Effect of Injection Timing on a Dual Fuel Diesel Engine Operated With Biogas Derived From Food Waste	4
Dynamics of Water Sighting and Injection Mechanisms in Fishbone Branch Wells in Bottom Water Reservoirs	4
Undersaturated Oil Viscosity Based on Multi-Gene Genetic Programming	4
Cuttings Transport With Oil- and Water-Based Drilling Fluids	4
Numerical Analysis and Experimental Verification on Flow Characteristics of a Pressurized Fluidized Bed System	4
Multi-Objective Optimization of a Bi-Metal High-Temperature Recuperator for Application in Concentrating Solar Power	4
An Investigation of Performance and Emissions of Diesel Engine Using Heterogeneous Catalyst Jatropha Biodiesel: A Sustainable Model Using Taguchi and Response Surface Methodology	4
Modeling Study on Nearly-Zero Carbon Cooling in Single Houses With Underground Cold Storage	4
Synergy in Syngas Yield From Co-Pyrolysis of Cow and Chicken Manures	4
Numerical Study of Composite Percussive Drilling With Consideration of Heat Transfer Between Drilling Fluid and Bottom-Hole Rock in Geothermal Drilling	4
The Phase Behaviors of Confined Shale Fluids Considering Adsorption Effect	4
Prediction and Analysis of Sustained Annular Pressure of Gas Wells Considering the Influence of Production System and Liquid Thermodynamic Properties	4
Modeling and Experimental Evaluation of the Effects of Reflective Film and Vacuum on the Performance of Concentric Double Tube Direct Flow Solar Collector	4
A Semi-Analytical Approach for Calculating Productivity Index in Vertical Flowing Well: High Gas-Oil Ratio Field Data as a Case Study	4
Enhancing CO2 Water-to-Water Heat Pump Performance Through the Application of a Multi-Objective Evolutionary Algorithm	4
Selected Aspects of Performance of Organic Rankine Cycles Incorporated Into Bioenergy With Carbon Capture and Storage Using Gasification of Sewage Sludge	4