Journal of disPersion Science and Technology

Article	Citations
Foaming behavior of sugar-based surfactants: influence of molecular structure and anticipation from surface properties	45
Application of an industrial agricultural waste-based activated carbon in the treatment of water contaminated with Reactive Blue 19 dye: optimization, kinetic, equilibrium and recyclability analyses	40
Characterization of mechanochemical modification in SiC powder	40
Preparation and performance study of P(BMA-SMA-st)/MIL-101(Fe) composite resin	39
Synthesis of new family of anionic/nonionic surfactant moieties based on mono maleate derivatives and investigate their physical properties	32
Preparation, characterization of PVDF/PVP/MMT mixed matrix membranes and their application for the removal of heavy metals from wastewater	29
Mucor sp. (Fungal Philospheric ) of Gambir ( Uncaria ) Leaf surface as a biosynthetic Mg doped ZnO Nanorods media for a	27
Efficient removal of Congo red from wastewater by gas-assisted low-gradient magnetic separation	22
Estimating reservoir fluid interfacial tension: an insight into the role of polar species of crude oil	21
Titanium dioxide modified by polydopamine used as stabilizer of Pickering emulsion and characterized for its sunscreen properties	17
Ultrasonication-induced re-dispersion of freeze-dried cellulose nanoparticles for improving strength and durability of PAN polymer matrix	16
Effects of polycarboxylate superplasticizer equipped with β-cyclodextrin as the terminal group on the fluidity of montmorillonite-containing cement paste	16
Flow synthesis of poly(acrylamide-co-acrylic acid) microspheres in a microreactor: Experimental and CFD studies	15
Ga-doped 3D ordered porous SnO2 with an ultrasmall pore size for enhanced formaldehyde sensitivity	15
The demulsification of oily wastewater by a hyperbranched polymer grafted SiO2	14
Analysis of asphaltene nano-aggregates formation using dynamic light scattering: Experimental and kinetic modeling	14
A detailed electronic-scale DFT simulation and a response surface methodology for the removal of Fe (III) ions from aqueous solutions	14
An innovative formulation approach for low-melting ingredients: optimizing an alternative melt suspension technique for Pyraclostrobin suspension concentrate	14
Fabrication of efficient, magnetic graphene oxide nanocomposite for the enhanced photodegradation of organic dyes under visible light	14
Synthesis of Fe-MOFs/h-CeO2 hollow micro-spheres and their highly efficient photocatalytic degradation of RhB	13
Isothermal and kinetic investigation of sorption efficacy of titania and bentonite nanocomposite for brilliant green dye removal for wastewater treatment	13
Synthesis and evaluation of a new polymeric scale inhibitor with multiple scale inhibition properties	13
O/W/O multiple emulsions containing soluble collagen: in vitro and in vivo skin biophysical properties evaluation	13
Study of an anti-high-temperature and salt-resistance alkyl glycine foaming agent and its foam stabilizing mechanism	12
Surface modification induced improvement of dispersion stability and tribological properties of MoS2 nanosheets	12

Sol-gel synthesized Cu/ZnS nanocomposites for photocatalytic dye degradation and antibacterial activity	12
Temperature dependent micellization behavior of as synthesized anionic SAILs in aqueous nonionic polymer solutions: conductivity, UV-visible probe and antimicrobial studies	12
Effects of methanol and ethylene glycol on the interactions between methane hydrate particles and water droplets	12
Preparation and characterization of patauá and pracaxi Brazilian vegetable oil emulsions	12
Effect of particle gradation on the properties of Mg(OH) 2 slurry: viscosity, stability, and rheology	11
CO2/N2 and light dual-stimuli responsive wormlike micelles based on CTAB and conventional compounds	11
Exploring use of titania–bentonite composite for adsorptive detoxification of crystal violet dye in eco-friendly way	11
Effects of multiple hydraulic punching for ultra-deep buried high ground stress powdered coal seam with low permeability	11
Synthesis of a novel flocculant with dimethylamino propylmethacrylamide and polyether and its flocculation performance	10
The impact of nozzle parameters and water injection pressure on the application effect of hydraulic punching enhanced permeability technology in high ground stress coal seam	10
Synthesis of polyacrylate dispersant by DPE method and its application in inkjet ink of titanium dioxide	10
Adsorptive of vanadium and palladium ions using chitin-extracted from shrimp shell wastes: genetic programming modeling	10
Effect of comb polymer dispersants with different molecular structures on the performance of LiFePO 4 suspensions	10
Chelating solid-phase polymeric adsorbent for the removal of Hg2+ ions from aqueous solutions: preparation, characterization and adsorption optimization studies	9
Use of physio-chemically fabricated Musa paradisiaca mulch for Congo Red dye sorptive detoxification in an eco-friendly way from water	9
Preparation of artificial humic acid from corn straw and its high-efficiency adsorption on norfloxacin	9
Synthesis and Characterization of cellulose-derived superabsorbent hydrogel and its applications in the treatment of wastewater containing heavy metal ions	9
Study on the influence of SARA fraction in heavy oil on the oil recovery during water flooding by experiments and the molecular dynamics simulation	9
Stabilization mechanism of reverse emulsions containing chromium (III): effect of interphase modification and dispersed phase viscosity	9
Cnicus Benedictus roots as a low-cost adsorbent for methylene blue dye removal from aqueous solution: kinetic and equilibrium studies	9
Role of surfactants on Fe 2+ mediated oxidative decolorization of Acid Red 13 by peroxydisulfate	9
Development of chitosan-coated iron oxide hybrid composites associated with hexadecafluorozinc phthalocyanine for photodynamic therapy	9
The influence of microchannel structure on double emulsion droplets formation	9
Enhanced ethanol gas sensing properties of hierarchical porous SnO2-ZnO microspheres at low working temperature	9
The evaluation of dodecyl hydroxy sulfobetaine as a high-temperature and high-salinity resistant foaming agent in sandstone reservoirs	8
Extended release of 6-aminopenicillanic acid by silanol group functionalized vermiculite	8
Enhanced oil recovery for siliciclastic reservoirs using alcoholic micellar solutions: performance evaluation in core flooding systems	8
Phase transition behavior of pentylcyanobiphenyl liquid crystal containing n-dodecyl-2-hydroxy-1-naphthaldimine	8
Darcy–Forchheimer higher-order slip flow of Eyring–Powell nanofluid with nonlinear thermal radiation and bioconvection phenomenon	8
Design, characterization and pharmacokinetic studies of anti-Malarial drug Artemisinin by optimized self-emulsifying nano drug delivery system (SNEDDS)	8
Optimized Zn/Al–NO 3 LDHs nanosuspensions as a new generation inorganic gene carrier systems for primary cell lines	8
Preparation and characterization of self-suspended CaCO3 nanoparticles derived from scallop shells	8
Experimental study on the mechanical degradation of partially hydrolyzed polyacrylamide in pore throats	8
Sorption of Ni(II) by sol-gel silica functionalized with DMG and other chelating agents	8
The core-shell structured aqueous dispersions of the siloxane-grafted polyurethane copolymers with high transparency	8
Synthesis and properties of AMPS/MA/HEMA terpolymer retarder for oil well cement	7
Ultrasound assisted co-precipitation synthesis Fe3O4 nanoparticles as a magnetic adsorbent for Congo red removal	7
Characterization of oil-in-water pickering emulsions stabilized by β-cyclodextrin systems	7
Multiple effects of glycine on stability and rheology behavior of hydrated Mg(OH) 2 slurry	7
Honeycomb films of polyoxomolybdate-surfactant hybrids and electrochemical detection of hydroquinone	7
Study on synthesis, properties, and aggregation behavior of sodium alkyl glycoside sulfate	7
Efficient and eco-friendly mixed bacterial consortium for petroleum wastewater treatment: Effect of the bio-augmentation and biosurfactant addition on hydrocarbon biodegradation	7
Novel Beeswax-neat’s-foot oil formulation and its impact on leather finishing	7
Synthesis of a lignin-based alcohol ether carboxylate surfactant and its application as cotton fiber detergent	7
Biochar-loaded nZVI/Ni bimetallic particles for hexavalent chromium removal from aqueous solution	7
Effect of modified γ-Fe 2 O 3 magnetic nanoparticles on the stability of heavy oil-in-water emulsions	7
Efficient removal of Cr(VI) from aqueous solution by hydrochloric acid and polypyrrole co-modified sludge-based biochar	7
Effect of the concentration of carbon nanotubes (CNTs) on the rheological behavior in a lubricating oil of plant-derived lubricant	7
Adsorptive removal of heavy metals from water using thermally treated laterite: an approach for production of drinking water from rain water	7
Influence of calcination temperature on the gas-sensing performance of 3D porous SnO2 to formaldehyde	6

Study on synthesis and mechanism of high temperature resistant suspension stabilizer for spacer fluid	6
Effects of monovalent and divalent cations on the rheology of organic acid laden interfaces	6
Unsteady three dimensional radiative-convective flow and heat transfer of dusty nanofluid within porous cubic enclosures	6
Synthesis and evaluation of a new scale inhibitor: the modified epoxysuccinic acid copolymer	6
Revolutionizing nanomedicine: Expanding horizons of nanoemulsions in drug delivery and beyond	6
Sulfide-modified magnetic titanium dioxide microparticles for the adsorption and solid-phase extraction of toxic metals in aqueous samples	6
Synthesis, characterization and dispersion stabilities of novel ionic and nonionic diol modified waterborne polyurethane dispersions with different polyols	6
Fabrication of eco-friendly Chitosan/Polypyrrole composite for the removal of Anionic dye from wastewater: Optimization and Modeling studies	6
Formulation of zwitter-ionic terpolymeric hydrogels and their comprehensive rheological investigation	6
Preparation of low density, high-strength, strong hydrophobic particles (LHSPs) and its application as oil fracturing proppant	6
Synergistic interaction in cationic antipyrine/CTAB mixed systems at different phases	6
Removal of direct blue 71 and methylene blue from water by graphene oxide: effects of charge interaction and experimental parameters	6
Effect of pressure on methane hydrate formation in graphite nanofluids in non-stirred system	6
Plasma-assisted green fabrication of fluorescent carbon quantum dot–silver nanocomposites	6
Experimental study of rheology and filter loss performance of nano-ZnO-modified VES fracturing fluid	6
Preparation, characterization, optimization, and antibacterial evaluation of nano-emulsion incorporating essential oil extracted from Teucrium polium L	6
Fe-modified Eriobotrya japonica seed biochar for removal of methylene blue: Isotherms, thermodynamic, kinetic studies	6
Defluoridation of aqueous solution using raw and surface modified biosorbents prepared from adansonia digitata fruit pericarp	6
Parabolic effects of viscosity on dispersion and stability of millimeter-scale W1/O/W2 double droplets for ICF polymer shells	6
Investigations on asphaltene aggregate formation by high-field diffusion NMR and low-field ghost solvent NMR relaxometry	6
The conjoint effect of lab-grown nano-graphene dispersant and omega-9 fatty acid surfactant on performance of CI engine	6
Study on the synthesis and properties of benzoate modified with hydroxyl-terminated of the side chains of polycarboxylic superplasticizer	5
Photocatalytic adsorption and scavenging potential of chemical and green encapsulated anatase phase of coupled doped Zn-Co TiO 2 nanoparticles	5
Cubosomes – A novel approach to taste masking using ibuprofen as a model drug	5
Copper electrode for the removal of chromium from dyestuff industries effluent by electrocoagulation: kinetic study and operating cost	5
Removal of tartrazine, ponceau 4R and patent blue V hazardous food dyes from aqueous solutions with ZnAl-LDH/PVA nanocomposite	5
Study on water-based epoxy resin cementing fluid system	5
Using zeolite and Fe3O4@zeolite composites in removal of Reactive Red 120 from wastewater: Isotherm, kinetic, thermodynamic and adsorption behaviors	5
Adsorption of malachite green dyes from aqueous solution by metal organic framework-5 incorporated coal fly ash (MOF-5/CFA)	5
Multifaceted insights into the molecular interactions of tetraalkylammonium-based quaternary ammonium salts with cetyltrimethylammonium bromide: unraveling structural, thermodynamic, and antibacterial	5
Sustained vaginal delivery of in situ gel containing Voriconazole nanostructured lipid carrier: formulation, in vitro and ex vivo evaluation	5
Insights into the corrosion inhibition performance of essential oil of Teucrium luteum subsp. flavovirens for carbon steel in 1.0 M HCl me	5
Separation of left- and right-handed semiconducting single-walled carbon nanotube enantiomers using achiral amino acid surfactant	5
Evaluation of tribological efficacy and EP lubricity properties of gear oil (EP90) energized with molybdenum disulfide (MoS 2 ) nano-additives	5
Comparison of permeability of topical Cream drug through polymer synthetic membranes of different structures using Franz Cell diffusion test	5
Mechanism of As(V) adsorption from aqueous solution by chitosan-modified diatomite adsorbent	5
Facile extraction and prospective application of indigenous Cassia fistula tannin in sustainable leather manufacture	5
Upgrade of low rank coal by using emulsified asphalt and its application for preparation of coal water slurry with high concentration	5
Removal of methylene blue dye from aqueous solutions by adsorption technique using sodium alginate hybrid composites filled with SnS 2	5
Wear and frictional attributes of Al-alloy hybrid composite dispersed with hard-ceramic (ZrO 2 ) and solid-lubricant (Gr) particles	5
Nanocrystals: a new herald for the management of Alzheimer’s disease	5
Centrifugally spun magnetic nanofibers for anionic dye removal: Optimization and predictive modeling with RSM and ANN	5
Evaluation of the efficiency of ZnCl2 activated cocoa pod husk charcoal on the removal of Cu2+, Cd2+, and Pb2+ ions from aqueous solution	5
Functional and structural properties of gum arabic complexes with casein and hydrolyzed casein achieved by Maillard reaction	5
Study on the stability of emulsion based on molecular dynamics	5
Novel magnetic gel composite based on sodium alginate crosslinked by Yttrium(III) as biosorbent for efficient removal of direct dyes from aqueous solution	5
Evaluating the binding ability of promethazine hydrochloride drug with sodium dodecylsulphate/sodium lauroylsarcosinate/sodium cholate in the company of uridine biomolecules: experimental and theoreti	5
Impact of cocoa butter on the physicochemical properties of novel oleogels formulated with moringa seed oil and beeswax: Exploring crystal structure, drug release, and antimicrobial potential	5
Effect of dissolution for black carbon on the adsorption capacity for methylene blue: Equilibrium, kinetics and thermodynamics	4
Heavy oil SARA components interaction with p,o,m-xylene solvents/ionic liquids-molecular dynamics simulation and experiment	4
Research progress on scaling mechanism and anti-scaling technology of geothermal well system	4
A comparative study between two manufacturing processes for venlafaxine-loaded niosome (Nioven) production: optimization, characterization, pharmacokinetic investigations, depression management, and g	4
Investigation on the formation and stability of microemulsions with Gemini surfactants: DPD simulation	4
An Analytical Heat Conduction Modeling in Spherical Powder as Rapid Prototyping with Low Frequency SEDS	4
Simultaneous loading of clarithromycin and zinc oxide into the chitosan/gelatin/polyurethane core–shell nanofibers for wound dressing	4
Synthesis of phase change microcapsules based dispersants for waterborne coatings and their effects on paint film properties	4
A comparative study of GNPs and MWCNTs additives on dispersion behavior and strength characteristics of the adhesively bonded joints	4
Lignin doped epoxy acrylate sandwich electromagnetic shielding material synergized with Fe3O4 and CNT	4
Adhesion of methylene blue and malachite green to the surface of copolymer synthesized by grafting itaconic acid onto cellulose backbone – experimental and computational studies	4
Optimization of clobetasol propionate loaded niosomal gel for the treatment of psoriasis: Ex vivo and efficacy study	4
Investigation of sorption capacity of AMPS-(PHE-Ce)/MC hydrogel for effective removal of basic red 2 dye	4
Development of pitavastatin-loaded super-saturable self-nano emulsion: a continues screening and optimization approach using statistical technique	4
Research on the wettability of localized pulse electrolytic machining mold steel (GCr12)	4
Effect of solid dispersants on the formation of hydrates in W/O emulsion systems: Micron and nanoscale	4
A novel coalescing material for high efficiency oil-water separation	4
Nanotechnological advancement for the treatment of neurodegenerative disorders	4
Controlled fabrication of biocompatible graphene oxide Langmuir–Blodgett films by size and surface property manipulation	4
Defluoridation of water using Stevia-based adsorbent	4
Environmentally benign preparation of copper oxide nanoparticles and its potential biological and photocatalytic activities	4
Removal of Reactive Red 195 and Methylene Blue dyes by adsorption on the surface of cobalt hydroxide-supported polystyrene waste particles	4
Synthesis, self-assembly and surface-active properties of alkyl halide mediated imidazolium monomeric surfactants	4
Experimental study on replacement behavior of crude oil by CO 2 based on nuclear magnetic resonance technology	4
Adsorption of cyanide from Cassava wastewater using activated carbons derived from Raphia hookeri kernels: a comparison of in-situ and	4
Geometric features in lyotropic liquid crystalline phase transitions observed in aqueous surfactant systems	4
Correction	4
The effect of pre-corrosion on corrosion inhibition performance and mechanism of quinoline quaternary ammonium salts	4
Flotation behavior of a complex lead-zinc ore using individual collectors and its blends for lead sulfide	4
Enhancing topical acitretin delivery: formulation and evaluation of solid lipid nanoparticles for efficient skin therapy through in vitro and ex vivo testing	4
Poly(3-thienylboronic acid) coated magnetic nanoparticles as a magnetic solid-phase adsorbent for extraction of methamphetamine from urine samples	4
Investigating the adsorption potential of coconut coir as an economical adsorbent for decontamination of lanthanum ion from aqueous solution	4

Yttrium doped barium titanate nanocrystals synthesis using inverse miniemulsion and their properties	4
Correction	4
Mixed micellization of cationic/anionic amino acid surfactants: Synergistic effect of sodium lauroyl glutamate and alkyl tri-methyl ammonium chloride	4
Decontamination coupled with dynamic adsorption of sulfur mustard (CEES) and nerve agent-sarin simulants (DMMP) on synthesized zeolite-alpha with its metal oxide composites	4
Peony seed oil microemulsion that enhances the antioxidant, antitumor, and antibacterial activities of berberine hydrochloride	4
Cyclodextrin nano-organogels as a delivery vehicle for peppermint essential oil to enhance its physico-chemical properties and skin photoprotective performance	4
Cinnamaldehyde encapsulation within new natural wax-based nanoparticles; formation, optimization and characterization	4
Improvement of dispersion stability and polishing performance of chemical mechanical polishing slurry for cemented carbide inserts	4
Highly selective and sensitive colorimetric detection of arsenic(III) in aqueous solution using green synthesized unmodified gold nanoparticles	4
Preparation and performance evaluation of cationic hydrophobically associating suspension agent for cementing	4
An efficient method to improve the dispersion and biocompatibility of ZnO nanoparticles	4
Effects of waterborne epoxy resin on the mechanical properties and microstructure of oil-well cement	4
Comparative study of the stabilizing behavior of organoclays in Pickering emulsion	4
Artificial neural network-based sensitivity analysis and experimental investigation of liquid–solid fluidization technique for low-grade coal upgradation	4
Preparation and properties of modified nano-montmorillonite viscosity reducers	3
Synthesis and characterization of self-assembly nanocomposite of ginger extract/cellulose of cotton supported by zinc oxide nanoparticle for destroying the Cryptosporidium parvum	3
Synthesis, characterization, and rheological behavior of HPG graft poly (AM-co-AMPS)/GO nanocomposite hydrogel system for enhanced oil recovery	3
TX-100 adsorption from aqueous solution using modified graphene oxide; optimization by response surface methodology and one factor at a time techniques	3
Effect of aerosolized TiO 2 nanoparticles on enhanced heat transfer performance in a pipe flow: Experimental investigation	3
Predicting microfluidic droplet diameters in glass capillary devices using machine learning	3
Adsorption mechanism of asphaltenes and surfactants at oil-water interface: based on dissipative particle dynamics method	3
Simplified synthesis of bentonite/gelatin and bentonite/sucrose composites for efficient removal of anionic and cationic dyes	3
Experimental and DFT investigation of ciprofloxacin adsorption onto ultra-high porous activated carbon from aqueous solutions	3
Multi-responsive novel phosphamide organogels dominated by a natural diterpene rigid backbone	3
Fabrication and characterization of tea seed oil pickering emulsion stabilized synergistically by carboxymethylcellulose and β -cyclodextrin	3
A concise approach for interpreting the removal kinetic of 2,4-D by carbonized peanut shell	3
Study of the adsorption isotherm of 2-mercaptobenzothiazole by activated carbon based on grape marc: linear and non-linear method	3
Synthesis and characterization of chitosan-bentonite biocomposite: Parametric optimization and adsorption potential	3
Physicochemical investigations of interaction of antitumor etoposide with ionic and nonionic micelles: a spectroscopic, conductivity and voltammetric study	3
Taguchi’s optimization technique for water deflouridation through electrocoagulation	3
Deriving optimal and adaptive nanoparticles-assisted foam solution for enhanced oil recovery applications: an experimental study	3
Formulation and statistical optimization of clozapine solid self emulsification system for improving the dissolution properties	3
Cationic surfactant-aided surface modification of the activated carbon-based materials for the enhancement of phenol adsorption-capacity determined by ultraviolet-visible spectroscopy	3
High-strength self-healing hydrogels based on boronate-diol complexation cross-linking with good bioavailability	3
Influence of oil well cement on the structure and properties of thermosetting resin cementing fluids	3
Bioactive molecule-based nano-particulate drug delivery system for antifertility activity	3
Phosphoric acid-induced activation of sepiolite for enhanced As(III) adsorption: role of in situ deposition of nano-hydroxyapatite	3
Wax crystal dynamics and viscosity abnormal reduction in asphaltene-containing waxy oil at low temperatures	3
Tunable crystal structures of binary mixtures of various patchy colloids and droplets	3
Recyclable magnetic nickel ferrite–carboxymethyl cellulose–sodium alginate bio-composite for efficient removal of nickel ion from water	3
Adsorption of Mn+7 ions on chitosan/cellulose composite: experimentally and theoretically approaches	3
Electrospray technology as a probe for single step fabrication of glipizide loaded nanocochleates with enhanced bioavailability	3
Preparation and characterization of novel MP-MMT/PMMA composite microspheres	3
Efficient removal of anionic Amaranth azo dye from the aqueous environment using papaya leaf stalks: Studies on batch adsorption, mechanism, and desorption	3
Physicochemical studies of sunflower oil based vitamin D nanoemulsions	3
Sustained delivery of statistically optimized transfersomal gel of miconazole nitrate for vaginal candidiasis	3
Quercetin and Morin dual drug loaded nanostructured lipid carriers: formulation and in vitro cytotoxicity study on MCF7 breast cancer cells	3
Formulation and characteristic evaluation of tacrolimus cubosomal gel for vitiligo	3
Efficient hexavalent chromium removal through recyclable flower-like cerium phosphate polyaniline nanocomposite via adsorption-reduction pathway	3
L-arginine–phosphatidylcholine thermoresponsive gel for enhanced transdermal delivery and L-929 cell cytotoxicity evaluation	3
Montmorillonite swelling properties with various surfactants based on molecular simulation	3
In-situ synthesis of potassium copper hexacyanoferrate−expanded graphite for effective removal of strontium from water	3
Apparent molar volume, compressibility, and spectroscopic studies of ionic surfactants in aqueous solutions of antibiotic gemifloxacin	3
A detailed experimental and theoretical evaluations of two thiazolidine-2, 4-dione derivatives as corrosion inhibitors for carbon steel in a hydrochloric acid electrolyte	3
Influence of nontoxic biopolymer Arabic Gum as stabilizing and reducing agents in the formation of nanosilver in aqueous and micellar media	3
Nanoemulsion-based patch for the dermal delivery of ascorbic acid	3
Experimental investigations on thermo-physical properties and stability of diamond-alumina based hybrid nanofluids	3
Biosorption of methylene blue by lentil shell on activation with sulfuric acid, formaldehyde, and calcination: kinetic, isotherm, and thermodynamic study	3
Synthesis, characterization and investigation of chitosan-functionalized ZnFe2O4 for the removal of dichlorvos from aqueous solution	3
Preparation of graphene oxide nanoparticles and their derivatives: Evaluation of their antimicrobial and anti-proliferative activity against 3T3 cell line	3
Super plasticizer assisted bath ultra sonication for dispersion of multi walled carbon nanotubes in cement composites	3
Wettability of polymer materials with different liquids and effect of contact angle test liquids on calculated surface free energy value	3
Underwater superoleophobic cement-alumina coated meshes for oil/water and emulsion separation	3
Rosuvastatin-loaded solid SMEDDS: an innovative approach for solubility augmentation and improved pharmacodynamic profile	3
BNNS formation through surface modification of hBN nanopowders with a silane coupling agent	3
A comparative study of TiO 2 nanoparticles and Cu(II)/TiO 2 nanocomposites on photodegradation of cinnamic acid (CA) under natural	3
Efficient adsorption of cationic and anionic dyes on Algerian natural phosphate	3
Porous silica composites as efficient adsorbents for dye removal from aqueous solution	3
Transdermal delivery of acemetacin loaded microemulsions: preparation, characterization, in vitro – ex vivo evaluation and in vivo analgesic and anti-inflammatory efficacy	3
Synthesis and application of cationic fluorocarbon surfactants	3
A hybrid of NiCo-PBNCs nano-composite supported two-dimensional molybdenum disulfide as excellent peroxidase mimics for colorimetric glucose detection	3
Effect of permeability on displacement efficiency and dominant oil–displacement mechanism in surfactant flooding	3
Bubble size distribution and stability of CO2 microbubbles for enhanced oil recovery: effect of polymer, surfactant and salt concentrations	3
Evaluation of structure-reactivity correlation of efficient corrosion inhibitor ionic liquids for mild steel in acidic medium	3
Synergism between betaine surfactants under high-salt conditions	3
Application of UV-synthesized anion exchange membranes to improve nickel removal through galvanic deposition process	3
Removal of zinc by emulsion liquid membrane using lecithin as biosurfactant	3
Preparation and performance study of organosilicon fluorine modified acrylate emulsion	3
Effect of hydrophilicity of lignin particles on emulsifying properties of Pickering emulsion	3
Production of red mud based nanofibers and their potential in arsenate removal from waste water	3
Stability optimization of orthovanadate nanoparticles in biocompatible media	3
Optimizing seawater purification: Ion exchange selective demineralization through single and multi-objective techniques	3
Removal of fluoride from ground water by electrocoagulation method: investigation of process parameters, kinetic analysis, and operating cost	3
Preliminary study of the superlubricity behavior of ZrO 2 /PI lubricating with liquid crystal	3
Evaluation of photocatalytic properties of TiO 2 /g-C 3 N 4 core-shell hybrid catalyst supporte	3
Wettability alteration of sandstone oil reservoirs by different ratios of graphene oxide/silica hybrid nanofluid for enhanced oil recovery	3
Investigation on foam properties of Gemini quaternary ammonium salt containing hydroxyl hydrophilic headgroup	3
Experimental study of bubble-droplet interaction in water; the effect of water salinity on the drainage time	3
Study on the treatment of oily wastewater with non equilibrium plasma synergistic catalysts	3
Atom transfer radical polymerization initiated by activator generated by electron transfer in emulsion media: a review of recent advances and challenges from an engineering perspective	2
Formation and rheology of CO2-responsive anionic wormlike micelles based clear fracturing fluid system	2
Effect of particle size and concentration on the chemical, physical and functional properties of rice-cornsilk composite flour paste	2
A comparative study of the in vitro antitumor effect of the disulfide-linked and diselenide-linked polyethylene glycol-curcumin nanoparticles	2
The influences of Na + , Ca 2+ on the water-in-oil Pickering emulsion stabilized by stearic acid modified hydrophobic calcium carb	2
Preparation and optimization of a resveratrol solid dispersion to improve the physicochemical properties and oral bioavailability of resveratrol	2