Mechanics of Composite Materials

Article	Citations
Smart Composite Structures with Embedded Sensors for Load and Damage Monitoring – A Review	34
Quasi-Static Penetration Behavior of Glass-Fiber-Reinforced Epoxy Nanocomposites	32
Mathematical Analysis of Technological Parameters for Producing Superfine Prepregs by Flattening Carbon Fibers	26
The Mathematical Study of an Edge Crack in Two Different Specified Models under Time-Harmonic Wave Disturbance	25
Static Response and Buckling Loads of Multilayered Composite Beams Using the Refined Zigzag Theory and Higher-Order Haar Wavelet Method	23
Modelling the Process of Fused Deposition Modelling and the Effect of Temperature on the Mechanical, Roughness, and Porosity Properties of Resulting Composite Products	18
Nonlinear Dynamic Analysis of Porous Graphene Platelet-Reinforced Composite Sandwich Shallow Spherical Shells	17
Mechanical Stability of Eccentrically Stiffened Auxetic Truncated Conical Sandwich Shells Surrounded by Elastic Foundations	15
A Modal Analysis of Forced Vibration of a Piezoelectric Plate with Initial Stress by the Finite-Element Simulation	15
On Temperature-Related Shift Factors and Master Curves in Viscoelastic Constitutive Models for Thermoset Polymers	13
The Influence of Internal Stresses on the Aging of Polymer Composite Materials: a Review	13
Coupled Flexural-Torsional Free Vibration of an Axially Functionally Graded Circular Curved Beam	12
Dynamic Mechanical Properties of a Biocomposite Reinforced with Sodiumbicarbonate-Treated Sisal Fibers at Different Frequencies	12
Increasing the Bearing Capacity of Composite Plates in the Zone of Bolted Joints by Using Curvilinear Trajectories and a Variable Fiber Volume Fraction	11
Equivalent Spectral Method to Estimate the Fatigue Life of Composite Laminates Under Random Vibration Loadings	11
Optimization of Pultrusion Processes for an Industrial Application	9
Advances in Natural-Fiber-Reinforced Composites: A Topical Review	9
Recycling of Fiberglass Fillers Obtained from Polymer Composites Based on an Epoxy Vinyl Ester Binder	9
Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling	8
Numerical Studies on the Influence of a Reinforcing Material on the Energy Absorption in a Multilayered Composite during Impacts	8
Buckling Characteristics of FGM Plates Subjected to Linearly Varying In-Plane Loads	8
Properties of Epoxy Compositions Cured by Aminolytic Splitting Products of a Secondary Polyethylene Terephthalate and Polycarbonate	7
Influence of a Silica Aerogel Filler on the Mechanical, Thermal, and Physical Properties of Flax/Epoxy Composite	7
Interfacial Engineering of CFRP Composites and Temperature Effects: A Review	7
Shape Control of Composite Plates with Distributed Piezoelectric Actuators in a Three-Dimensional Formulation	7

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings	6
Numerical and Experimental Investigation of the Burst Resistance of Glass-Fiber Thermoplastic Composite Pipes under Internal Pressure	6
Bending Stiffness of Damaged Cross-Ply Laminates	6
Lateral-Torsional Buckling of a Bidirectional Exponentially Graded Thin-Walled C-Shaped Beam	6
Process-Induced Deformation of L-Shaped Laminates: Analysis of Tool–Part Interaction	6
Influence of the Method of Obtaining Filled Polymer Nanocomposites of Polylactide Reduced Graphene Oxide on Their Properties and Structure	6
A Review on Drilling of Fiber-Reinforced Polymer Composites	6
Parametric Resonance of a Three-Layered Cylindrical Composite Rib-Stiffened Shell*	6
Modeling the Homogenization Process of Polyethylene Compositions in a Single-Screw Extruder with a Maddock Mixing Element	5
Homogenization of Rubber-Cord Layers at Moderately Large Deformations	5
Mechanical Characterization and Optimum Design of Wound Glass-Fiber-Reinforced Polymer Pipes Based on the Winding Angle and the Number of Plies	5
Optimizing the Thickness/Stiffness Distribution of Infinitely Wide Porous FGM Plates Subjected To Supersonic Flutter Constraints	5
Extreme Values of the Strength of Single Filaments and Threads of a Paraaramide Fiber After Its Treatment by a Water Suspension of Carbon Nanoparticles	5
Experimental and Numerical Study on Mechanical Characteristics of Aluminum/Glass Fiber Composite Laminates	5
A Comparative Study on the Failure Criteria for Predicting the Damage Initiation in Fiber-Reinforced Composites	5
A Study on the Delamination and Flexural Behavior of Carbon- and Aramid-Fiber-Reinforced Epoxy Composites with Silicon Carbide Particle Inclusions	5
Dynamic Analysis of Composite Sandwich Beams with a Frequency-Dependent Viscoelastic Core under the Action of a Moving Load	5
Predicting the Degradation of the Residual Strength in Cyclic Loading of Layered Composites	5
An Analysis of Sensitivity of the Monitoring System of Helicopters to Faults of their Blades	5
Numerical Simulation of Progressive Delamination in Composite Laminates Under Mode I and Mode II Loadings	5
Contact Interaction of an Axisymmetric Stamp and an Elastic Layer Fixed on a Poroelastic Base	5
Prediction of the Bending Strength of a Laminated Veneer Lumber (LVL) Using an Artificial Neural Network	5
A Comparative Study of Incremental Selfconsistent and Eshelby–Mori–Tanaka Models for Estimating the Electroelastic Properties of Piezoelectric Polymer Composites with an Orthotropic Matrix	5
Loading-Unloading-Recovery Curves for Polyester Yarns and Identification of the Nonlinear Maxwell-Type Viscoelastoplastic Model	5
Machinability of High-Strength Fiber-Reinforced Polymer Textile Composites: A Review	5
Multi-Objective Optimization of Geometrical Parameters of Composite Sandwich Panels with an Aluminum Honeycomb Core for an Improved Energy Absorption	5
Adhesive Bond Strength Calculation of Reinforcing Fibers with Polymers by the “Loop” Method	5
A Layerwise Higher-Order Approach for the Free-Edge Effect in Angle-Ply Laminates	4
Dynamic Response of a Grid-Stiffened Composite Cylindrical Shell Reinforced with Carbon Nanotubes to a Radial Impulse Load	4
Statistical Structural Integrity Control of Composite Structures Based on an Automatic Operational Modal Analysis — a Review	4
A Free Vibration Analysis of Laminated Microplates Reinforced By Graphene Platelets Integrated with Piezoelectric Facesheets, Resting on an Elastic Foundation, and Subjected to Thermoelectrical Loads	4
Application of the Dynamic Indentation Method for Evaluation of the Hardness and Elastic Modulus of the Material of Products Obtained by Extrusion Method of Additive Production from Carbon-Filled Comp	4
Experimental and Numerical Analyses of Optimized Composite Profiles for Aircraft Construction	4
Micromechanical Models for Analyzing Bending of Porous/Perfect FG Plates in a Hygro-Thermomechanical Environment by a Quasi-3D Theory	4
Effect of Microwave Irradiation on the Microinhomogeneity of α-Relaxation Processes in Polyvinyl Alcohol	4
Modeling the Curing Kinetics of an Epoxy Binder with Disturbed Stoichiometry for a Composite Material of Aerospace Purpose	4
Free Vibration Analysis of Carbon-Nanotube-Reinforced Beams Resting on a Viscoelastic Pasternak Foundation by the Nonlocal Eshelby–Mori–Tanaka Method	4
Determination of Three-Dimensional Stresses in a Semi-Infinite Elastic Transversely Isotropic Composite	4
Modeling the Nonlinear Deformation and Damage of Carbon-Aramid Fabric Composites in Tension	4
A Method for Predicting the Parameters of Plastic Deformation of Dispersedly Reinforced Materials by Using a Modified Mori–Tanaka Model	4
Effect of Mixing Conditions and Montmorillonite Content on the Mechanical Properties of a Chloroprene Rubber	4
Mathematical Algorithm for Estimating the Acoustic Conductivity of the Wavefront for Verification of a Diagnostic Model in an Analysis of Defects in a Polymer Composite Material	4
Finite-Element Analysis of RC Beams Strengthened With CFRP U-Wraps	4
Protection of Aircraft Lattice Shell Made of UD CFRP Ribs from Low-Velocity Impacts	4
Designing of Smooth Composite Panels Providing Stability and Strength at Postbuckling Behavior	4
Single- and Multiobjective Optimizations of Dimensionally Stable Composites Using Genetic Algorithms	3
The Influence of Carbon/Glass/Epoxy Hybrid Interfacial Adhesion on the Mode II Delamination Fracture Toughness	3
Influence of Polyethersulfone on the Fracture Toughness of Epoxy Matrices and Reinforced Plastics on Their Basis	3
Bending and Vibration of a Bio-Inspired Bouligand Composite Plate Using the Finite-Element Method	3
One-Dimensional vs. Three-Dimensional Models in Free Vibration Analysis of Axially Functionally Graded Beams with Non-Uniform Cross-Sections	3

Computer Simulation of Composites Consisting of Piezoceramic Matrix with Metal Inclusions and Pores	3
A Mesoscopic Model for Particle-Filled Composites with Network Microstructures	3
Effect of Oligomeric Copolyimides on the Properties of Epoxy Binders	3
Deformation Mechanics of Fiber-Reinforced Plastic Specimens in Tensile and Compression Tests 1. Theoretical and Experimental Methods for Determining the Mechanical Characteristics and the Parameters o	3
Estimation of Residual Thermal Stresses in a Layered Ceramic Composite	3
Predicting the Mechanical Properties of Antifriction Composite Materials	3
Local Stress Distributions in Fiber-Reinforced Composites with Consideration of Thermal Stresses During the Curing Process	3
Evaluation and Modeling of Tensile Properties of Chopped Carbon Fiber Tapes Reinforced Thermoplastics of Different Tape Thicknesses	3
Features of Three-Point Bending Tests for Determining Out-of-Plane Shear Modulus of Layered Composites	3
Analytical Solution of the Bending Problem for Rectangular Orthotropic Plates with a Variable in-Plane Stiffness	3
Effect of Gamma Irradiation on Strength Properties of Basalt Composites	3
Effect of the Initial Stress State on the Effective Properties of Piezocomposite	3
A Comparative Study on the Effect of Milling and Abrasive Water Jet Cutting Technologies on the Tensile Behavior of Composite Carbon/Epoxy Laminates	3
Experimental Investigation of the Effect of Adhesive-Impregnated Pins on the Mechanical Behavior of Z-Pinned Lap Shear Joints	3
On Determination of the Linear Viscoelastic Compliance and Relaxation Functions for Polymers in One Tensile Test	3
Effect of Material State and Temperature on Nonlinear Viscoelastic Response: 3D Constitutive Model and Incremental Formulation for Numerical Analysis	3
Degradation of the Mechanical Properties of Fiber Reinforced Plastic under Cyclic Loading	3
Experimental and Finite-Element Analysis of Metal-Inserted Filament-Wound Composite Tubes	3
Creep and Long-Term Strength of a Laminated Thick-Walled Tube of Nonlinear Viscoelastic Materials Loaded by External and Internal Pressures	3
Micro-Crack Bridging Effects on the Tensile and Compressive Strengths of CNT-Epoxy Composites	3
Failure of Unidirectional Fiber Reinforced Composites: A Case Study in Strength of Materials	3
Nonlinear Bending Analysis of a Laminated Composite Plate Using a Refined Zig-Zag Theory	3
Combined Use of Contact Layer and Finite-Element Methods to Predict the Long-Term Strength of Adhesive Joints in Normal Separation	3
Comparison of Continuum Shell and Solid Element-Based Modeling Strategies for Mesoscale Progressive Damage Analysis of Fiber Composites	2
Optimal Stochastic Distribution of CNTS in a Cantilever Polymer Microbeam Using Artificial Neural Networks	2
High Strain Rate Mechanical Behavior of Polyamide 66 and Polyamide 66-Glass Fiber Reinforced	2
An Adaptive Structure Based on Hybrid Extension-Twisting Coupled Laminates	2
Deformation Mechanics of Fiber-Reinforced Plastic Specimens with a [±45] Lay-Up in Tensile and Compression Tests 2. Investigation of Flat Internal Buckling Modes	2
Material with High Content of Composite Recyclate	2
An Experimental and Numerical Investigation on the Low-Velocity Impact Response of Nanoreinforced Polypropylene Core Sandwich Structures	2
Generalized Durability Models and their Application to Solving Problems on Predicting the Defining Characteristics of Composites	2
Experimental Investigation into the Low-velocity Impact Behavior of Thick and Thin Laminated Composites	2
Effects of Hot-Water Aging on the Compression Properties of E-Glass/Epoxy Composites at Varying Strain Rates	2
Topology Optimization of Brittle Composites for Optimizing Fracture Resistance Incorporating Phase Field Method with Strain Orthogonal Decompositions	2
Investigation of a Grey Alder Particleboard Bonded by Different Industrial Side-Stream Lignins	2
Families of Stress-Strain, Relaxation, and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 1. The model, Its Basic Proper	2
The Effect of Importing Extension-Bending Coupling into Asymmetric Composite Structures	2
Using the Concept of Imposed Constraints in the Plasticity Theory of Composites	2
Effective Elastic Moduli of Short-Fiber Composite with Sliding Contact Conditions at Interfaces	2
Mixed Bending-Shear Buckling Modes of a Sandwich Beam under the Axial Compression of its Outer Layers	2
Solving Some Problems of Crack Mechanics for a Normal Edge Crack in Orthotropic Solid Within the Cohesive Zone Model Approach	2
Evaluation of the Viscoplastic Strain of High-Density Polyethylene/Multiwall Carbon Nanotube Composites Using the Reaction Rate Relation	2
Mapping of Elastic and Hyperelastic Properties of the Periodontal Ligament	2
An Analysis of Tensile and Compressive Properties of Carbon Fiber High-Entropy Alloy Composite Laminates	2
Wear Simulation of a Spherical Hinge Joint with a Thin Composite Coating	2
Correction to: Quasi-Static Penetration Behavior of Glass-Fiber-Reinforced Epoxy Nanocomposites	2
Effect of Halloysite Nanotubes on Matrix Microcracking in Carbon Fiber/Epoxy Composites	2
A Numerical Model for the Effective Damping Properties of Unidirectional Fiber-Reinforced Composites	2
Generalization of a Nonlinear Maxwell-Type Viscoelastoplastic Model and Simulation of Creep and Recovery Curves	2
Shear Buckling Mode and Failure of Flat Fiber-Reinforced Specimens Under Axial Compression 1. Refined Nonlinear Mathematical Deformation Model	2
Prediction of GFRP Self-Heating Kinetics Under Cyclic Bending	2
Experimental Analysis of the Tensile Behavior of a Hybrid Composite Beam with Adjustable Mechanical Properties	2
Thin Indicator Films to Assess the Residual Strength of a GFRP after a Local Contact Action	2
Dispersion of Torsional Waves in a Hollow Bilayered Cylinder with Initial Inhomogeneous Thermal Stresses	2
Strength Prediction for Composite Plates with an Inclined Elliptical Hole	2
The Effect of Packing Type on the Equivalent Modulus and Stress Concentrations of Unidirectional Composites	2
Buckling Analysis of Functionally Graded Sandwich Plates Resting on an Elastic Foundation and Subjected to a Nonuniform Loading	2
Effect of the Thermal Conductivity of Mated Materials on the Wear Intensity of a Polymerpolymer Friction Pair	2
Deformation of an Elastic Circular Sandwich Plate in a Neutron Flow	2
Longitudinal Wave Propagation in Axially Graded Raylegh–Bishop Nanorods	2
Damping and Wear Behavior of 3D Woven Reinforced Structural Composites for Automotive Leaf Spring Applications	2
The Effect of Carbon Fibers Modification on the Mechanical Properties of Polyamide Composites for Automobile Applications	2
The Possibility of Creep Prediction of Viscoelastic Polymer Composites Using Frequency Dependences of Complex Modulus Components	2
Averging the Viscoelastic Properties of a Rubber-Cord Ply in a Plane Stress State	2
Polymer-Composite Vessels with a High Mass Perfection for the Storage and Transportation of a High-Pressure Gas	2
Predictive Analysis of the Influence of a Polypropylene-Talc Composite Layer on the Ring Stiffness of a Multilayer Plastic Pipe	1
Contact Interaction of a Stamp and a Poroelastic Strip Lying on a Winkler Base	1
Ano-Scale Mechanical, Viscoelastic, and Tribological Behaviors of Polyaryletherketone Modified Bismaleimide Blends	1
Evaluating the Local Strengh and Crack Resistance of an Glass Fiber Epoxy Composite in the Interlayer Tension and Shear Using a Finite-Element Model and Experimentally Determined Parameters of the Coh	1
Weight Optimization of Design Structural Parameters of Sandwich Composite Shells	1
Compressive and Flexural Behavior of Fiberglass/Polyurethane Sandwich Panels: Experimental and Numerical Study	1
An Analytical-Numerical Coupled Model for an Aeroelastic Analysis of Tail Flutter Based on Bending–Torsional Coupling	1
Multiphase Fea-Approach for Non-Linear Deformation Prediction and Fibre-Reinforced Plastics Failure	1
Finite-Element Analysis and an Experimental Study into the Water Jet Reaming Process of Carbon-Carbon Composites	1
3D Nonaxisymmetric Local Stability Loss of a Hollow Cylinder Made of an Anisotropic Viscoelastic Material	1
Theoretical-Experimental Approach to Determining the Mechanical Characteristics of Thin Polymer Composite Coatings	1
Design Method of Reinforcement Structure with Symmetric Pairs of Layers by the Example of Composite Gas Tank	1
Fatigue Analysis of a Type-IV CNG Composite Cylinder with Variable Wall-Thickness and Polyethylene Liner	1
Study of the Elastic and Elastoplastic Properties of a Dispersed Composite Based on Computational Experiments	1
Evaluation of the Effect of Elevated Temperature and Preliminary Thermal Aging on the Residual Mechanical Properties of a Structural Fiberglass Using the Signals of Acoustic Emission	1

Development of the “Separated Anisotropy” Concept in the Theory of Gradient Anisotropic Elasticity	1
Polypropylene Filaments Modified with Manganese-Containing Nanoparticles	1
Evaluation and Optimization of the Replacement of Fine Aggregate by Waste Tire Rubber in Geopolymer Mortar with Metakaolin	1
Effects of Layering Types and Fiber Off-Axis Angle on the Mechanical Properties of S-Glass-fiber-Reinforced Composites	1
Families of Stress–Strain, Relaxation and Creep Curves Generated by a Nonlinear Model for Thixotropic Viscoelastic-Plastic Media Accounting for Structure Evolution Part 2. Relaxation and Stress-Strain	1
Inequality Indices Applied to Statistical Physics of Criticality in an Impregnated Fiber Bundle Model	1
Correction to: Local Stress Distributions in Fiber-Reinforced Composites with Consideration of thermal Stresses During the Curing Process	1
Experimental Investigation into the Fatigue Damage Performance of a GRP Mortar Pipe Culvert	1
Investigating the Effects that Alternative Turbine Engine Fuels have on the Mechanical Properties of Carbon Fiber/Epoxy Composite	1
Development of Web-Based Software for the Failure Analysis of Composite Laminae	1
Shear Buckling Mode and Failure of Flat Fiber- Reinforced Specimens in the Axial Compression 2. Numerical Method, Experimental and Numerical Investigations of the Specimens with a [0]s Layup	1
Method for Determining the Shear Moduli of Composite Materials from Experiments in the Three-Point Transverse Bending	1
Impact of the Shear and Thickness Stretching Effects on the Free Vibrations of Advanced Composite Plates	1
Size-Dependent Thermal Backbone Curves for Nanocomposite Reddy Microbeams Reinforced with Graphene Platelets and Resting on Elastic Foundation	1
On One Approach in Fracture Mechanics of Composites with Parallel Cracks Under the Action of Initial (Residual) Stresses	1
Modeling the Initiation and Propagation of Cracks in a Fibrous Composite Under Loading Across Fibers	1
Evaluation of the Performance of Antifriction PTFE Composites at a Pressure Over 60 MPA. I. Comparison of Their Hardness and Deformation Properties Under Free and Constrained Compression	1
Discrete Mechanics of Frontally Growing Bodies	1
Evaluation of the Buckling Stability and Geometrically Nonlinear Behavior of Square Composite Panels of an Unsymmetrical Structure in Shear	1
Solving the Stress Singularity Problem in Boundary-Value Problems of the Mechanics of Adhesive Joints and Layered Structures by Introducing a Contact Layer Model. Part 1. Resolving Equations for Multi	1
Damage Behaviors of Thin and Thick Laminated Composites Under Ballistic Effect	1
Flexural Vibrations of a Composite Piezoactive Bimorph in an Alternating Magnetic Field: Applied Theory and Finite-Element Simulation	1
Transverse Crack Initiation in Thin-Ply Laminates Subjected to Tensile Loading at Low and Cryogenic Temperatures	1
Ecocomposites Based on High-Impact Polystyrene (HIPS) and Amazon Açaí (Euterpe oleracea) Fibers: Influence of NaOH Treatment on Its Structural, Thermal, and Mechanical Properties	1
Creating a New Elastomeric Material with a Polyimide Filler and Studying its Viscoelastic Properties under Applied External Electric Fields and Dynamic Loads	1
Characterization of Damages and the Residual Flexural Strength of Layered Composites After Low-Velocity Impacts Using Indicator Coatings	1
Effect of Mechanical Vibration and Impact Loading on the Performance of Poly (Vinylidene Fluoride) Composite	1
Exact Equations and Finding the Cutoff Frequencies of Functionally Graded Plates in Free Vibrations	1
Modeling the Yield Surface of a Composite Made from Rigid-Plastic Materials Using Piecewise Quadratic Yield Criteria 1. The General Case of a Plane Multidirectional Reinforcement	1
Behavior of the Dynamic Fracture of a Hybrid Nanocomposite: an Optical Study of Synergistic Toughening Effects	1
Investigation of Gap and Overlap Effects on the Buckling Load of Variable-Stiffness Composite Cylinders Under an External Hydrostatic Pressure and Pure Bending	1
Numerical Modeling of Large Deformations for Porous Metals and Identification of Carcass Deformation Diagrams	1
A Hybrid Parameter Homogenization Workflow for Assessing the Mechanical Behavior of a Steel Fiber-Reinforced Concrete	1
Delamination Quantification by Haar Wavelets and Machine Learning	1
Analysis of Thermal Response in Reinforced Plates under a Dynamic Explosion-Type Loading	1
Multilevel Optimization of Complex Composite Structures with Variable Stiffness, Part II: Application of the Optimization Algorithm	1
Vibration and the Buckling Response of Functionally Graded Plates According to a Refined Hyperbolic Shear Deformation Theory	1
Destruction of PMMA after the Irradiation with High-Energy Electrons and a Mechanical Point Impact	1
Fracture of Highly Elastic and Composite Materials in Compression Along Near-Surface Crack	1
First-Ply Failure Behavior of Laminated Composite Skew Plates of Various Edge Conditions	1
Loading Capacities of Bonded Composite Pipe Joints of Different Structures	1
Progress in Friction Stir Welding of Polymer and Aluminum Alloys	1
Stress-Strain State of a Composite Plate Under the Action of a Transient Movable Load	1
Analysis and Modeling of Semi-Open Thermoplastic Honeycomb Core Structures for Mechanical Simulation with Representative Volume Elements	1