Engineering With Computers

Article	Citations
Interactive PDE patch-based surface modeling from vertex-frames	557
Retraction Note: Optimization of residential building envelopes using an improved Emperor Penguin Optimizer	84
Data assimilation for real-time subsurface flow modeling with dynamically adaptive meshless node adjustments	76
Concentric tube robot: a real-time static model considering friction	72
Direct coupling of dual-horizon peridynamics with finite elements for irregular discretization without an overlap zone	64
Lagrangian particle-based simulation of waves: a comparison of SPH and PFEM approaches	64
Comprehensive multi-material topology optimization for stress-driven design with refined volume constraint subjected to harmonic force excitation	56
Elite-driven surrogate-assisted CMA-ES algorithm by improved lower confidence bound method	54
A cyclical fast iterative method for simulating reentries in cardiac electrophysiology using an eikonal-based model	52
Correction and addendum to: IGA approximations of elastic interfaces and their defects in an elastic medium with couple stress	51
A novel enriched degree of freedom method for absorbing boundary conditions in the time-domain finite element method	50
Fast descriptor-based 2D and 3D microstructure reconstruction using the Portilla–Simoncelli algorithm	48
Vibration analysis of functionally graded sandwich porous plates with arbitrary boundary conditions: a new general viscoelastic Winkler–Pasternak foundation approach	44
Numerical simulation of spatio-temporal spread of an infectious disease utilizing a collocation method based on local radial basis functions	43
Cheap-expensive multi-objective Bayesian optimization for permanent magnet synchronous motor design	41
The novel learning solutions to nonlinear differential models on a semi-infinite domain	40
Special issue on recent advances in meshfree and particle methods	39
Reducing spatial discretization error on coarse CFD simulations using an openFOAM-embedded deep learning framework	38
Local tangential lifting virtual element method for the diffusion–reaction equation on the non-flat Voronoi discretized surface	38
A novel method for improving the accuracy of MR-derived patient-specific vascular models using X-ray angiography	37
Interval sequential optimization and time-variant reliability assessment (ISOTRA) framework for dynamic stress-constrained topology design	36
D3SAI: a data-driven platform for measuring interfacial tension using machine learning and drop shape analysis	35
FPGA-orthopoly: a hardware implementation of orthogonal polynomials	35
KANtrol: a physics-informed Kolmogorov–Arnold network framework for solving multi-dimensional and fractional optimal control problems	35
Solving acoustic scattering problems by the isogeometric boundary element method	34

3D isogeometric indirect BEM solution based on virtual surface sources on the boundaries of Helmholtz acoustic problems	34
Dual-variable-horizon peridynamics and continuum mechanics coupling modeling and adaptive fracture simulation in porous materials	32
Correction to: Generic volume transfer for distributed mesh dynamic repartitioning	30
Voroto: multiscale topology optimization of voronoi structures using surrogate neural networks	30
Correction to: A discrete element framework for the numerical analysis of particle bed-based additive manufacturing processes	29
The simplest node-based equilibrium finite element for 2D Poisson equation with exploration of the equivalence among hybrid, flux-based and stress-function-based equilibrium elements	27
Micro-plasma actuator mechanisms in interaction with fluid flow for wind energy applications: operational parameters	26
Near-boundary error reduction with an optimized weighted Dirichlet–Neumann boundary condition for stochastic PDE-based Gaussian random field generators	26
Concepts of data collection for the CAD-integrated isogeometric analysis	26
Enriched immersed finite element and isogeometric analysis: algorithms and data structures	25
A double-loop Kriging model algorithm combined with importance sampling for time-dependent reliability analysis	25
A hybrid Lattice-Boltzmann model for hydro-electrochemical modeling and sensitivity analysis of crystallization potential in nanoporous media. Part I: simulation model	25
Simulating the aftermath of Northern European Enclosure Dam (NEED) break and flooding of European coast	25
A second-order space-time accurate scheme for Maxwell’s equations in a Cole–Cole dispersive medium	24
Adaptive multi-domain physics-informed neural networks for coupled thermo-mechanical analysis of thermal barrier coatings	24
A GPU-accelerated simulator for the DEM analysis of granular systems composed of clump-shaped elements	24
Hierarchical radial basis functions method for the coupling of Stokes and Darcy flow	24
Towards a comprehensive damage identification of structures through populations of competing models	24
Finite element implementation of ordinary state-based peridynamics with variable horizon	23
A novel enhanced global exploration whale optimization algorithm based on Lévy flights and judgment mechanism for global continuous optimization problems	23
The 30th anniversary of the UK Association for Computational Mechanics	23
Nonlinear forced vibrations of three-phase nanocomposite shells considering matrix rheological behavior and nano-fiber waviness	23
Minimizing thermally induced residual stresses in metal additive manufacturing through peridynamics topology optimization	23
Peridynamic modeling of dual-phase-lag thermal-moisture coupling in a finite element framework	23
Modified strain gradient analysis of the functionally graded triply periodic minimal surface microplate using isogeometric approach	23
Foretelling microstructural interface with multi-generational convolutional-LSTM framework	22
Generative inverse design of multimodal resonant structures for locally resonant metamaterials	22
Human-augmented topology optimization design with multi-framework intervention	22
A numerical approach for optimization of the working fluid of a standing-wave thermo-acoustic refrigerator	22
Accurate computation of partial volumes in 3D peridynamics	21
An efficient framework for structured material particle generation in multi-context modeling	21
Modelling of viscoelastic materials using non-ordinary state-based peridynamics	21
Adaptive density-based robust topology optimization under uncertain loads using parallel computing	21
Two-way coupled stabilized finite element method for transient thermal convection in irregular geometries with electromagnetic force fields	21
Optimized differential evolution algorithm for solving DEM material calibration problem	21
Worst case mesh quality in the target matrix optimization paradigm	21
A finite element based approach for nonlocal stress analysis for multi-phase materials and composites	20
Modified nonlocal couple stress isogeometric approach for bending and free vibration analysis of functionally graded nanoplates	20
Two-phase elastic axisymmetric nanoplates	20
Multi-fidelity Bayesian optimization of shear-wall building costs	20
A novel meshless method based on the virtual construction of node control domains for porous flow problems	20
Topology optimization of multi-phase shell-infill composite structure for additive manufacturing	20
A novel meshfree radial point interpolation method with discrete shear gap for nonlinear static analysis of functionally graded plates	20
Special issue: Numerical simulation for additive manufacturing processes and products	19
Structural analysis of nonlocal nanobeam via FEM using equivalent nonlocal differential model	19
An efficient automatic mesh generation algorithm for planar isogeometric analysis using high-order rational Bézier triangles	19
Evaluating the effect of a ducted winglet on the induced drag of wind turbine blade using CFD and Trefftz plane analysis	19
Retraction Note to: Chaotic simulation of the multi-phase reinforced thermo-elastic disk using GDQM	19
Automatic unstructured mesh generation approach for simulation of electronic packaging system	19
An efficient method for estimating failure possibility function by combining adaptive Kriging model with augmented fuzzy simulation	19

Parametric model order reduction by machine learning for fluid–structure interaction analysis	18
Corner error reduction by Chebyshev transformed orthogonal grid	18
Toward engineering lattice structures with the material point method (MPM)	18
A discontinuous piecewise polynomial generalized moving least squares scheme for robust finite element analysis on arbitrary grids	18
A unified scheme for nonlinear dynamic direct time integration methods: a comparative study on the application of multi-point methods	17
A novel topology framework for simultaneous topology, size and shape optimization of trusses under static, free vibration and transient behavior	17
Neural networks vs. splines: advances in numerical extruder design	16
Combined phase-field and cohesive zone modeling for mixed-mode fracture in polymer composites	16
Transformations of computational meshes	16
A waveguide port boundary condition based on approximation space restriction for finite element analysis	16
Leveraging code generation for transparent immersogeometric fluid–structure interaction analysis on deforming domains	16
A physics preserving neural network based approach for constitutive modeling of isotropic fibrous materials	16
The generation of tetrahedral meshes for NURBS-enhanced FEM	16
A multi-subnets physics-informed neural network (Ms-PINN) model for transient heat transfer analysis in materials with heterogeneous microstructures	15
On the use of elliptic PDEs for the parameterisation of planar multipatch domains	15
Second-order accurate, maximum principle-preserving, and convergent schemes for the phase-field shape transformation model	15
Inverse design optimization framework via a two-step deep learning approach: application to a wind turbine airfoil	15
A robust methodology for dataset preparation and algorithm performance assessment in machine learning prediction of the fatigue life of additive manufactured components	15
An optimization-driven design framework for inertance-integrated hydraulic shock absorbers: incorporating nonlinear and parasitic effects	15
GMR-Net: GCN-based mesh refinement framework for elliptic PDE problems	15
Application of reservoir computing networks in PDE-based image denoising	15
Reliability index based strategy for the probability-damage approach in fail-safe design optimization (β-PDFSO)	15
A novel analytical model of particle size distributions in granular materials	15
A parallel acceleration GPU algorithm for large deformation of thin shell structures based on peridynamics	15
Scalable field-aligned reparameterization for trimmed NURBS	15
Magneto-thermoelastic behaviour of a finite viscoelastic rotating rod by incorporating Eringen’s theory and heat equation including Caputo–Fabrizio fractional derivative	15
Data-driven modeling of the mechanical behavior of anisotropic soft biological tissue	15
Hollow structural topology optimization considering geometrical nonlinearity using three-dimensional moving morphable bars	14
A unified computational framework for developing general multi-time-step (MTS) coupling schemes for time-dependent problems	14
High-fidelity hybrid NURBS-Galerkin framework for nonlinear coupled phase-field elasticity: formulation and implementation	14
Buckling analysis of functionally graded sandwich thin plates using a meshfree Hermite Radial Point Interpolation Method	14
Radial basis function interpolation of fields resulting from nonlinear simulations	14
A new approach to involve bond rotation and plasticity in the ordinary state-based peridynamic method	14
Support vector machines-based pre-calculation error for structural reliability analysis	14
Coupling of bond-based peridynamics and continuous density-based topology optimization methods for effective design of three-dimensional structures with discontinuities	13
Study of steady two-dimensional advection–diffusion equation with stratification using second-kind shifted Chebyshev polynomials	13
Wave propagation numerical simulation approach based on a novel TPMS-based lattice metamaterial for improved vibration transmission of doubly curved sandwich systems	13
The development of an ALE finite element and discontinuous Galerkin method for the non-isothermal non-Newtonian FSI problem	13
A neural network approach for solving nonlinear differential equations of Lane–Emden type	13
From CAD to representations suitable for isogeometric analysis: a complete pipeline	13
Sonics: develop intuition on biomechanical systems through interactive error controlled simulations	13
An efficient meshless method to approximate semi-linear stochastic evolution equations	13
Peridynamic computational homogenization theory for materials with evolving microstructure and damage	13
Locally refined quad meshing for linear elasticity problems based on convolutional neural networks	13
Topology optimisation of transient compressible flow	13
Space–time enriched finite elements for elastodynamic wave propagation	13
Multistage physics informed neural network for solving coupled multiphysics problems in material degradation and fluid dynamics	13
Multi-fidelity reduced-order model for GPU-enabled microfluidic concentration gradient design	13
Stable quadratic generalized IsoGeometric analysis for elliptic interface problem	13
Surrogate model-based multi-objective Bayesian optimisation of porous acoustic barriers	13
Multiphysics modeling of 3D traction force microscopy with application to cancer cell-induced degradation of the extracellular matrix	13
Computational modeling of quasi static fracture using the nonlocal operator method and explicit phase field model	13
Quadrature-free immersed isogeometric analysis	13
Development of an equation-based parallelization method for multiphase particle-in-cell simulations	12
Parameterization, algorithmic modeling, and fluid–structure interaction analysis for generative design of transcatheter aortic valves	12
Unraveling the complexities of a highly heterogeneous aquifer under convergent radial flow conditions	12
Automatically imposing boundary conditions for boundary value problems by unified physics-informed neural network	12
Multithreaded runtime framework for parallel and adaptive applications	12
Deep learning-based semi-supervised approach for high-quality 2D quadrilateral mesh deformation	12
Vibrational behavior of truncated conical porous GPL-reinforced sandwich micro/nano-shells	12
Nonlocal strain gradient analysis of FG GPLRC nanoscale plates based on isogeometric approach	12
An evolutionary-based polynomial regression modeling approach to predicting discharge flow rate under sheet piles	12
Probabilistic CFD computations of the NASA low-speed centrifugal compressor (LSCC) under uncertain operational conditions	12
Mixed precision iterative refinement with adaptive precision sparse approximate inverse preconditioning	12
Space-time hp-finite elements for heat evolution in laser powder bed fusion additive manufacturing	11
An ANN-assisted efficient enriched finite element method via the selective enrichment of moment fitting	11
Small/large amplitude vibration, snap-through and nonlinear thermo-mechanical instability of temperature-dependent FG porous circular nanoplates	11
A ready-to-manufacture optimization design of 3D chiral auxetics for additive manufacturing	11
Nodal force distribution of moments on arbitrarily shaped geometries without multi-point constraints	11
Speculative anisotropic mesh adaptation on shared memory for CFD applications	11
Seventeen criteria for evaluating Jacobian-based optimization metrics	11
General resource manager for computationally demanding scientific software (MARE)	11
MPIPN: a multi physics-informed PointNet for solving parametric acoustic-structure systems	11
Improved gradual change-based Harris Hawks optimization for real-world engineering design problems	11
Finite element formulation of metal foam microbeams via modified strain gradient theory	11
A robust game optimization for electromagnetic buffer under parameters uncertainty	11
GAS-AU: an average uncertainty-based general adaptive sampling approach	11
qRLS: quantum relaxation for linear systems in finite element analysis	11
The Radial Point Interpolation Method combined with a bi-directional structural topology optimization algorithm	11
A novel conjoined space–time formulation for explicit analyses of dynamic models	10

Spatial arc spline approximants with fewest arcs and their smooth representations by low-degree splines	10
Multi-scale topology optimization using neural networks	10
High order numerical method for the simulation of Rayleigh–Stokes problem for a heated generalized second grade fluid with fractional derivative on regular and irregular domains	10
Novel approaches for hyper-parameter tuning of physics-informed Gaussian processes: application to parametric PDEs	10
Uncertainty analysis in acoustics: perturbation methods and isogeometric boundary element methods	10
A deep autoencoder based approach for the inverse design of an acoustic-absorber	10
A computational homogenization framework for non-ordinary state-based peridynamics	10
Thermal–mechanical metamaterial analysis and optimization using an Abaqus plugin	10
Polytopal discontinuous Galerkin methods for low-frequency poroelasticity coupled to unsteady Stokes flow	10
Peridynamics for out-of-plane damage analysis of composite laminates	10
An isogeometric FSDT approach for the study of nonlinear vibrations in truncated viscoelastic conical shells	10
Digital twin based lifecycle modeling and state evaluation of cable-stayed bridges	10
Approximate symbolic solutions to differential equations using a novel combination of Monte Carlo tree search and physics-informed neural networks approach	10
Cut-PFEM: a Particle Finite Element Method using unfitted boundary meshes	10
Physical modeling of conjugate heat transfer for multiregion and multiphase systems with the Volume-of-Fluid method	10
Free vibration analysis of free-form stiffened shells based on isogeometric method	10
Higher-order block-structured hex meshing of tubular structures	10
Capturing the nonlocal effect using a novel hybrid 8-node plate element based on the Hellinger–Reissner variational principle	10
Automatic decomposition of protrusion volumes on thin-shell models for hexahedral mesh generation	9
Topology optimization of thick–thin plate structures considering local stress constraints	9
Numerical approximation of the generalised Kuramoto–Sivashinsky equation by a kernel smoothing technique	9
A Dynamic Soft Sensor Based on Hybrid Neural Networks to Improve Early Off-spec Detection	9
Parameterization-based neural network: predicting non-linear stress–strain response of composites	9
A PDROD model of reinforced concrete based on peridynamics and rod elements	9
Helmholtz-x : Parallelized adjoint open source solver for the thermoacoustic Helmholtz equation	9
THB-Diff: a GPU-accelerated differentiable programming framework for THB-splines	9
An importance sampling method for structural reliability analysis based on interpretable deep generative network	9
A novel RBF-based meshless method for solving time-fractional transport equations in 2D and 3D arbitrary domains	9
Modified strain gradient-based nonlinear building sustainability of porous functionally graded composite microplates with and without cutouts using IGA	9
Local vs. nonlocal integral elasticity-based phase field models including surface tension and simulations of single and two variant martensitic transformations and twinning	9
Topology optimization for transient thermoelastic structures under time-dependent loads	9
Efficient topology optimization for geometrically nonlinear multi-material systems under design-dependent pressure loading	9
A novel deep unsupervised learning-based framework for optimization of truss structures	9
Electro-chemo-mechanical phase field modeling of localized corrosion: theory and COMSOL implementation	9
Data-driven multiscale finite-element method using deep neural network combined with proper orthogonal decomposition	9
Homogenization of the elastic-viscoplastic damage behavior of asphalt mixtures based on the mesomechanical Mori–Tanaka method	9
A finite element based optimization algorithm to include diffusion into the analysis of DCE-MRI	9
Domain adaptation based transfer learning approach for solving PDEs on complex geometries	8
Novel topological and geometrical modelling of N-frequency geodesic icosahedron tensegrities	8
Experimental investigations and nonlocal computational models of slurry infiltrated fiber concrete with CaCO3 whiskers	8
TINN: time-step integration neural network for dynamic analysis of nonlinear structure systems subjected to seismic excitation	8
A novel key performance analysis method for permanent magnet coupler using physics-informed neural networks	8
A boosted chimp optimizer for numerical and engineering design optimization challenges	8
Implementation of immersed boundaries via volume penalization in the industrial aeronautical computational fluid dynamics solver CODA	8
A probabilistic simplified sine cosine crow search algorithm for global optimization problems	8
A global sensitivity analysis of a mechanistic model of neoadjuvant chemotherapy for triple negative breast cancer constrained by in vitro and in vivo imaging data	8
Electrochemical–chemical–mechanical phase field model for non-uniform corrosion-induced cracking considering the rust precipitation	8
Non-local modelling of multiphase flow wetting and thermo-capillary flow using peridynamic differential operator	8
Nonlocal modeling of bi-material and modulus graded plates using peridynamic differential operator	8
A hybrid smoothed moving least-squares interpolation method for acoustic scattering problems	8
An active learning Kriging model with adaptive parameters for reliability analysis	8
A cascadic multilevel optimization framework for the concurrent design of the fiber-reinforced composite structure through the NURBS surface	8
A nodal-integration-based finite element method for solving steady-state nonlinear problems in the loading’s comoving frame	8
Peridynamic modeling and simulation of thermo-mechanical fracture in inhomogeneous ice	8
Heterogenous architected materials: enhancing mechanical performance through multi-objective optimization	7
A trigonometric quintic B-spline collocation technique for the fifth-order KdV–Burgers–Fisher equation	7
A hybrid ensemble-based automated deep learning approach to generate 3D geo-models and uncertainty analysis	7
Stochastic deep collocation method based on neural architecture search and transfer learning for heterogeneous porous media	7
Bridging the lab- to field-scale solutions of Navier–Stokes equations to study seawater intrusion in fractures	7
Physics-aware neural network-based parametric model-order reduction of the electromagnetic analysis for a coated component	7
Lattice-Boltzmann LES modelling of a full-scale, biogas-mixed anaerobic digester	7
Spectrum analysis of $$C^0$$, $$C^1$$, and $$G^1$$ constructions for extraordinary points	7
An efficient fixed-time increment-based data-driven simulation for general multibody dynamics using deep neural networks	7
F$$_3$$ORNITS : a flexible variable step size non-iterative co-simulation method handling subsystems with hybrid advanced capabilities	7
An adaptive bivariate decomposition method for interval optimization problems with multiple uncertain parameters	7
Sharp phase-field modeling of isotropic solidification with a super efficient spatial resolution	7
Isogeometric analysis of architected materials and structures	7
A coupled finite-volume immersed boundary method for the simulation of bioheat transfer in 3D complex tumor	7
Multiphysics model reduction of thermomechanical vibration in a state-space formulation	7
A moment–curvature-based constitutive model for interactive simulation of visco-plastic rods	7
A meshless collocation method based on Pascal polynomial approximation and implicit closest point method for solving reaction–diffusion systems on surfaces	7
Dental composites with strength after aging improved by using anodic nanoporous fillers: experimental results, modeling, and simulations	7
Chebyshev spectral approximation-based physics-informed neural network for solving higher-order nonlinear differential equations	7
Peridynamic differential operator for lossy compression and recovery of 3D point cloud data	7
Open-source shape optimization for isogeometric shells using FEniCS and OpenMDAO	7
Enforcing local boundary conditions in peridynamic models of diffusion with singularities and on arbitrary domains	7
A general finite deformation hypoelastic-plasticity non-ordinary state-based peridynamics model and its applications	6
A meshfree phase-field model for simulating the sintering process of metallic particles for printed electronics	6
Renormalization-free of maximum stress aggregation in stress-constrained topology optimization with polygonal spatial discretization	6
Implicit implementation of the nonlocal operator method: an open source code	6
Correction to: Computational intelligence approach using Levenberg–Marquardt backpropagation neural networks to solve the fourth‑order nonlinear system of Emden–Fowler model	6
Indirect all-quadrilateral meshing based on bipartite topological labeling	6
A novel multi-fidelity surrogate modeling method for non-hierarchical data fusion	6
Enhanced block-structured quadrilateral mesh generation: integrating cross-field and distance field for optimal domain decomposition	6
Nonlocal dynamic response analysis of functionally graded porous L-shape nanoplates resting on elastic foundation using finite element formulation	6
Interpretation of clay modeling using differential geometry and its application to surface reconstruction	6
A Latin hypervolume design for irregular sampling spaces and its application in the analysis of cracks	6
Pixel-based shape optimization in 3D using constrained density-based topology optimization	6
Bi-fidelity adaptive sparse reconstruction of polynomial chaos using Bayesian compressive sensing	6
A new SPH-FEM coupling method for fluid–structure interaction using segment-based interface treatment	6
Image-based adaptive domain decomposition for continuum damage models	6
Electrochemical transport modelling and open-source simulation of pore-scale solid–liquid systems	6
Inherently interpretable machine learning solutions to differential equations	6
Numerical solutions for the Poisson-Nernst-Planck system using integrated radial basis function and moving least squares techniques with reduced order method	6
Special Issue: Imaging-based methods in computational medicine	6