Polymer Bulletin

Article	Citations
A review on poly lactic acid (PLA) as a biodegradable polymer	113
An insight into anticancer, antioxidant, antimicrobial, antidiabetic and anti-inflammatory effects of quercetin: a review	91
Recent advances in dye removal from wastewater by membrane technology: a review	89
Antimicrobial textile: recent developments and functional perspective	67
Developments in pressure-sensitive adhesives: a review	61
Polyaniline-TiO2-based photocatalysts for dyes degradation	60
Review on preparation and adsorption properties of chitosan and chitosan composites	57
A comprehensive review on recent advances in preparation, physicochemical characterization, and bioengineering applications of biopolymers	49
Synthesis of biohybrid magnetic chitosan-polyvinyl alcohol/MgO nanocomposite blend for remazol brilliant blue R dye adsorption: solo and collective parametric optimization	44
A review on polyimide reinforced nanocomposites for mechanical, thermal, and electrical insulation application: challenges and recommendations for future improvement	44
Polyurethane foams from vegetable oil-based polyols: a review	41
Synthesis of polyaniline/clay nanocomposites by in situ polymerization and its application for the removal of Acid Green 25 dye from wastewater	40
Bridging the gap between rubbers and plastics: a review on thermoplastic polyolefin elastomers	39
Impact of acid type and glutaraldehyde crosslinking in the physicochemical and mechanical properties and biodegradability of chitosan films	38
Polycaprolactone-based materials in wound healing applications	38
Electrochemical characteristics of solid state double-layer capacitor constructed from proton conducting chitosan-based polymer blend electrolytes	37
Extraction of pectin from albedo of lemon peels for preparation of tissue engineering scaffolds	36
The effect of silica nanoparticles on polysulfone–polyethylene glycol (PSF/PEG) composite membrane on gas separation and rheological properties of nanocomposites	35
Performance of various fillers in adhesives applications: a review	35
Rheological investigation of the viscoelastic thixotropic behavior of synthesized polyethylene glycol-modified polyacrylamide hydrogels using different accelerators	34
Filament-wound glass-fibre reinforced polymer composites: Potential applications for cross arm structure in transmission towers	34
Preparation and characterization of novel antibacterial blended films based on modified carboxymethyl cellulose/phenolic compounds	34
Antibacterial nanocomposite films of poly(vinyl alcohol) modified with zinc oxide-doped multiwalled carbon nanotubes as food packaging	33
Formulation and characterization of crosslinked polyvinyl alcohol (PVA) membranes: effects of the crosslinking agents	32
The physical properties, antioxidant and antimicrobial activity of chitosan–gelatin edible films incorporated with the extract from hop plant	32

Synthesis of Metal Organic Framework (MOF) based Ca-Alginate for adsorption of malachite green dye	32
Application of epoxy resins in building materials: progress and prospects	31
Enzymatic degradation of poly (butylene adipate co-terephthalate) (PBAT) copolymer using lipase B from Candida antarctica (CALB) and effect of PBAT on plant growth	31
Polymer pollution and its solutions with special emphasis on Poly (butylene adipate terephthalate (PBAT))	31
Synthesis and characterization of ZnO NPs-doped PMMA-BDK-MR polymer-coated thin films with UV curing for optical data storage applications	30
Synthesis and characterization of chitosan nanoparticles containing teicoplanin using sol–gel	30
Studies on favorable ionic conduction and structural properties of biopolymer electrolytes system-based alginate	29
A comprehensive review on polymer matrix composites: material selection, fabrication, and application	28
Fabrication of nano-CuO-loaded PVA composite films with enhanced optomechanical properties	27
Investigation of chemical bonding and electronic network of rGO/PANI/PVA electrospun nanofiber	26
Alkalinity triggered the degradation of polydopamine nanoparticles	26
Study and modeling of thermomechanical properties of jute and Alfa fiber-reinforced polymer matrix hybrid biocomposite materials	25
Optoelectronically suitable graphene oxide-decorated titanium oxide/polyaniline hybrid nanocomposites and their enhanced photocatalytic activity with methylene blue and rhodamine B dye	25
Dielectric dispersion and relaxations in (PMMA/PVDF)/ZnO nanocomposites	25
The preparation of sorbitol and its application in polyurethane: a review	25
A review on the limitations of natural fibres and natural fibre composites with emphasis on tensile strength using coir as a case study	24
Shape memory polymer nanocomposite: a review on structure–property relationship	24
Developments in reactive diluents: a review	24
Development of chitosan membrane using non-toxic crosslinkers for potential wound dressing applications	24
Photocatalytic activity of polyaniline and neutral polyaniline for degradation of methylene blue and malachite green dyes under UV Light	24
Novel approach for the utilization of ionic liquid-based cellulose derivative biosourced polymer electrolytes in safe sodium-ion batteries	24
Alginate-gelatin bioink for bioprinting of hela spheroids in alginate-gelatin hexagon shaped scaffolds	24
Development of poly(1-vinylimidazole)-chitosan composite sorbent under microwave irradiation for enhanced uptake of Cd(II) ions from aqueous media	23
A comparative analysis of the basic properties and applications of poly (vinylidene fluoride) (PVDF) and poly (methyl methacrylate) (PMMA)	23
The preparation, characterization and antibacterial properties of chitosan/pectin silver nanoparticle films	22
Synthesis of xanthan gum/trimethyl chitosan interpolyelectrolyte complex as pH-sensitive protein carrier	22
Production of biodegradable sodium caseinate film containing titanium oxide nanoparticles and grape seed essence and investigation of physicochemical properties	22
Rheological properties of high-density polyethylene/linear low-density polyethylene and high-density polyethylene/low-density polyethylene blends	22
Kinetics and mechanisms of Zn2+ release from antimicrobial food packaging based on poly (butylene adipate-co-terephthalate) and zinc oxide nanoparticles	22
A biodegradable film based on carrageenan gum/Plantago psyllium mucilage/red beet extract: physicochemical properties, biodegradability and water absorption kinetic	22
Synthesis, characterization and absorption study of chitosan-g-poly(acrylamide-co-itaconic acid) hydrogel	22
Ferroelectric ceramic dispersion to enhance the β phase of polymer for improving dielectric and ferroelectric properties of the composites	21
Antibacterial Polypeptide nisin containing cotton modified hydrogel composite wound dressings	21
Mutual dispersion of graphite–silica binary fillers and its effects on curing, mechanical, and aging properties of natural rubber composites	21
Fabrication and evaluation of structural, thermal, mechanical and optical behavior of epoxy–TEOS/MWCNTs composites for solar cell covering	21
Thermoplastic starch from corn and wheat: a comparative study based on amylose content	20
Synthesis, characterization and rheological study of Arabic gum-grafted-poly (methacrylic acid) hydrogels	20
Synthesis, characterization and properties of an anionic polymer for water-based drilling fluid as an anti-high temperature and anti-salt contamination fluid loss control additive	20
Fabrication and evaluation of pH sensitive chemically cross-linked interpenetrating network [Gelatin/Polyvinylpyrrolidone-co-poly(acrylic acid)] for targeted release of 5-fluorouracil	19
Structure–dynamic properties relationships in poly(ethylene oxide)/silicon dioxide nanocomposites: dielectric relaxation study	19
Structural, thermal and optical characteristics of laser-exposed Pd/PVA nanocomposite	19
Effects of gamma irradiation on 3D-printed polylactic acid (PLA) and high-density polyethylene (HDPE)	19
Electrospun polyvinyl alcohol (PVA) nanofibers as carriers for hormones (IAA and GA3) delivery in seed invigoration for enhancing germination and seedling vigor of agricultural crops (groundnut and bl	19
Structural, thermal and mechanical properties of composites of poly(butylene adipate-co-terephthalate) with wheat straw microcrystalline cellulose	19
Molecularly imprinted polymer film based plasmonic sensors for detection of ochratoxin A in dried fig	19
Green synthesis of chitosan-coated magnetic nanoparticles for drug delivery of oxaliplatin and irinotecan against colorectal cancer cells	18
Improvement on mechanical and flame retardancy behaviour of bio-exfoliated graphene-filled epoxy/glass fibre composites using compression moulding approach	18
Influence methods of preparation on the thermal stability of polyimide/silica dust	18
Significantly enhanced dielectric properties and chain segmental dynamics of PEO/SnO2 nanocomposites	18
Curing and thermal properties of tannin-based epoxy and its blends with commercial epoxy resin	18

Investigation of alumina nanoparticles role on the critical flux and performance of polyvinyl chloride membrane in a submerged membrane system for the removal of humic acid	18
Fabrication, characterization, dielectric properties, thermal stability, flame retardancy and transport behavior of chlorinated nitrile rubber/hydroxyapatite nanocomposites	18
Dielectric relaxation, XPS and structural studies of polyethylene oxide/iodine complex composite films	18
Fabrication of polyethylene glycol hydrogels with enhanced swelling; loading capacity and release kinetics	18
Nanoemulgel: a promising novel formulation for treatment of skin ailments	18
Synthesis, characterization and applications of poly(vinyl chloride) nanocomposites loaded with metal oxide nanoparticles	18
Epoxy polymers modified with polyetherimide. Part I: rheological and thermomechanical characteristics	18
Fabrication of semi-interpenetrated PVA/PAMPS hydrogel as a reusable adsorbent for cationic methylene blue dye: isotherms, kinetics and thermodynamics studies	18
Polylactic acid (PLA) membrane—significance, synthesis, and applications: a review	18
Impact of lithium triflate (LiCF3SO3) salt on tamarind seed polysaccharide-based natural solid polymer electrolyte for application in electrochemical device	18
A comprehensive review of polymer electrolyte for lithium-ion battery	18
Synthesis and characterization of as-grown doped polymerized (PMMA-PVA)/ZnO NPs hybrid thin films	18
A review on corrosion, mechanical, and electrical properties of glass fiber-reinforced epoxy composites for high-voltage insulator core rod applications: challenges and recommendations	17
Synthesis, characterization and swelling behavior of high-performance antimicrobial amphoteric hydrogels from corn starch	17
Design and assembly of supercapacitor based on reduced graphene oxide/TiO2/polyaniline ternary nanocomposite and its application in electrical circuit	17
Fabrication and characterization of carbon-based nanocomposite membranes for packaging application	17
Effect of alkali treatment and coupling agent on thermal and mechanical properties of Opuntia ficus-indica cladodes fibers reinforced HDPE composites	17
Investigation of gelatin/chitosan as potential biodegradable polymer films on swelling behavior and methylene blue release kinetics	17
Evaluation of mechanical, optical and thermal properties of PVA nanocomposites embedded with Fe2O3 nanofillers and the investigation of their thermal decomposition characteristics under non-isothermal	17
Effect of the multi-functional epoxides on the thermal, mechanical and rheological properties of poly(butylene adipate-co-terephthalate)/polylactide blends	17
An effect of mold surface temperature on final product properties in the injection molding of high-density polyethylene materials	17
A novel microwave-assisted synthesis, characterization and evaluation of luliconazole-loaded solid lipid nanoparticles	17
Preparation of nanogels based on kappa-carrageenan/chitosan and N-doped carbon dots: study of drug delivery behavior	17
Development of functional chitosan-based superabsorbent hydrogel nanocomposites for adsorptive removal of Basic Red 46 textile dye	17
Designing chitosan nanoparticles embedded into graphene oxide as a drug delivery system	17
Copolymer/graphene oxide nanocomposites as potential anticancer agents	17
Tailoring the structural and optical features of (PEO–PVA)/(SrTiO3–CoO) polymeric nanocomposites for optical and biological applications	17
Thermo-responsive poly(N-isopropyl acrylamide) hydrogel with increased response rate	17
Removal of cadmium ions from water using coaxially electrospun PAN/ZnO-encapsulated PVDF nanofiber membranes	17
Modification of nanocellulose membrane by impregnation method with sulfosuccinic acid for direct methanol fuel cell applications	17
Physical, mechanical, and antimicrobial properties of active edible film based on milk proteins incorporated with Nigella sativa essential oil	16
Mechanical, physical, and bio-functional properties of biopolymer films based on gelatin as affected by enriching with orange peel powder	16
Influence of cellulose nanocrystal/sisal fiber on the mechanical, thermal, and morphological performance of polypropylene hybrid composites	16
Enhancing efficacy and safety of azelaic acid via encapsulation in cyclodextrin nanosponges: development, characterization and evaluation	16
Characterization of As-prepared PVA-PEO/ZnO-Al2O3-NPs hybrid nanocomposite thin films	16
Optimization of gallic acid encapsulation in calcium alginate microbeads using Box-Behnken Experimental Design	16
In situ polymerization of styrene–clay nanocomposites and their properties	16
On the effects of high loading of ZnO nanofiller on the structural, optical, impedance and dielectric features of PVA@ZnO nanocomposite films	16
Polyvinyl alcohol–cellulose blend wood adhesive modified by citric acid and its effect on physical, thermal, mechanical and performance properties	16
Fabrication and chemo-physical characterization of CuO/chitosan nanocomposite-mediated tricomponent PVA films	16
Efficiency increase in hypercrosslinked polymer based on polystyrene in CO2 adsorption process	16
Electrospun cellulose acetate fibers for the photodecolorization of methylene blue solutions under natural sunlight	15
Enhancement of electrical properties of metal doped polyaniline synthesized by different doping techniques	15
Eco-friendly fully bio-based polybenzoxazine-silica hybrid materials by sol–gel approach	15
Screening and characterization of novel lipase producing Bacillus species from agricultural soil with high hydrolytic activity against PBAT poly (butylene adipate co terephthalate) co-polyesters	15
Nanocomposite of PVA/PVP blend incorporated by copper oxide nanoparticles via nanosecond laser ablation for antibacterial activity enhancement	15
A review presenting production, characterization, and applications of biopolymer curdlan in food and pharmaceutical sectors	15
Evaluation of the effect of isocyanate modification on the thermal and rheological properties of poly(ε-caprolactone)/cellulose composites	15
Synthesis, characterization, and swelling behaviors of sodium carboxymethyl cellulose-g-poly(acrylic acid)/semi-coke superabsorbent	15
Radiation cross-linked gelatin/sodium alginate/carboxymethylcellulose sodium hydrogel for the application as debridement glue paste	15
In situ synthesis of silver nanoparticles on modified poly(ethylene terephthalate) fibers by grafting for obtaining versatile antimicrobial materials	15
Influence of polyethyleneimine functionalized graphene on tribological behavior of epoxy composite	15
Properties of polyaniline/graphene oxide (PANI/GO) composites: effect of GO loading	15
Poly(lactic acid)-based bionanocomposites: effects of ZnO nanoparticles and essential oils on physicochemical properties	15
Gamma irradiation boosted the optical and electrical properties of PVP/NaAlg/Au ternary nanocomposite films for flexible optoelectronic devices	15
Study on the thermal stability of stabilized and unstabilized low-density polyethylene films	15
High protection performance of vanadium pentoxide-embedded polyfuran/epoxy coatings on mild steel	15
Preparation and characterization of the SPEEK/PVA/Silica hybrid membrane for direct methanol fuel cell (DMFC)	15
Recent developments in membrane technology for the elimination of ammonia from wastewater: A review	15
Characterization of polyaniline thin films prepared on polyethylene terephthalate substrate	15
Hydrophobically modified guar gum films for wound dressing	15
Synthesis of polymer networks by means of addition reactions of tri-amine and poly(ethylene glycol) diacrylate or diglycidyl ether compounds	14
Detailed investigation of the reinforcing effect of halloysite nanotubes-filled epoxidized natural rubber	14
Elevated performance of the neat, hybrid and composite membranes by the addition of nanoparticles (ZIF-67): A molecular dynamics study	14
Oxidized multiwall carbon nanotubes filled epoxy-based coating: fabrication, anticorrosive, and mechanical characteristics	14
A review on synthesis and applications of polyaniline and polypyrrole hydrogels	14
AC conductivity and dielectric studies in polypyrrole wrapped tungsten disulphide composites	14
A comparative investigation on different silane coupling agents modified sericite mica/polyimide composites prepared by in situ polymerization	14
Synthesis of graft copolymers of carboxymethyl cellulose and N,N-dimethylaminoethyl methacrylate and their study as Paclitaxel carriers	14
Application of different mathematical models for further investigation of in vitro drug release mechanisms based on magnetic nano-composite	14
Probing the electrical and dielectric properties of polyaniline multi-walled carbon nanotubes nanocomposites doped in different protonic acids	14
Antibacterial efficiency of silver nanoparticles-loaded locust bean gum/polyvinyl alcohol hydrogels	14
Thermal, structural and dynamical mechanical properties of hollow glass sphere-reinforced polypropylene composites	14
Comparative study of catalase immobilization via adsorption on P(MMA-co-PEG500MA) structures as an effective polymer support	14
Influence of lignite fly ash on the structural and mechanical properties of banana fiber containing epoxy polymer matrix composite	14
Reinforced distiller’s grains as bio-fillers in environment-friendly poly(ethylene terephthalate) composites	14
Effects of nanoclay modification with transition metal ion on the performance of urea–formaldehyde resin adhesives	13
Direct ionization and solubility of chitosan in aqueous solutions with acetic acid	13
Main structural and mechanical properties of electrospun PAN-based carbon nanofibers as a function of carbonization maximum temperature	13
Performance of nano-K-doped zirconate on modified opto-electrical and electrochemical properties of gelatin biopolymer nanocomposites	13

Optimization of novel bio-composite packaging film based on alkali-treated Hemp fiber/polyethylene/polypropylene using response surface methodology approach	13
Synthesize and characterization of Co-complex as interlayer for Schottky type photodiode	13
Synthesis, characterization and application of a molecularly imprinted polymer as an adsorbent for solid-phase extraction of selected pharmaceuticals from water samples	13
Starch-derived superabsorbent polymers in agriculture applications: an overview	13
Recent trends on synthetic approaches and application studies of conducting polymers and copolymers: a review	13
Additivation of the ethylene–vinyl acetate copolymer (EVA) with maleic anhydride (MA) and dicumyl peroxide (DCP): the impact of styrene monomer on cross-linking and functionalization	13
Silk fibroin/collagen 3D scaffolds loaded with TiO2 nanoparticles for skin tissue regeneration	13
Rapid synthesis of cellulose propionate and its conversion to cellulose nitrate propionate	13
An intumescent flame-retardant layer with β-cyclodextrin as charring agent and its flame retardancy in jute/polypropylene composites	13
Design of pH sensitive low-cost adsorbent from the exudate of Lannea coromandelica (Houtt) for remediation of Malachite Green dye from aqueous solution	13
Preparation and properties of wood dust (isoberlinia doka) reinforced polystyrene composites	13
Phosphate-based geopolymers: a critical review	13
Preparation and characterization of polythiophene/graphene oxide/epoxy nanocomposite coatings with advanced properties	13
Study of the spectroscopic, magnetic, and electrical behavior of PVDF/PEO blend incorporated with nickel ferrite (NiFe2O4) nanoparticles	13
Preparation and characterization of chitosan/AMPS/kaolinite composite hydrogels for adsorption of methylene blue	13
Synthesis and photoluminescence properties of polycarbazole/tin oxide (PCz/SnO2) polymer nanocomposites	13
State-of-the-art review on recent advances in polymer engineering: modeling and optimization through response surface methodology approach	12
Chitosan/laponite nanocomposite nanogels as a potential drug delivery system	12
The influence of modified soybean oil as processing aids in tire application	12
Synthesis and characterization of cost-effective industrial discarded natural ceramic particulates from Cymbopogon flexuosus plant shoot for potential polymer/metal matrix reinforcement	12
Fabrication of pH-sensitive chitosan/layered double hydroxide (LDH)/Fe3O4 nanocomposite hydrogel beads for controlled release of diclofenac	12
Structural characterization using SAXS and rheological behaviors of pluronic F127 and methylcellulose blends	12
“Fatliquors” for leathers: an application of microemulsion—a review	12
Production and properties of the fibrillated plastic composite from recycled polystyrene and Luffa cylindrica	12
Biodegradable packaging materials	12
Enhancing the dielectric properties of compatibilized high-density polyethylene/calcium carbonate nanocomposites using high-density polyethylene-g-maleic anhydride	12
Development of gum acacia based magnetic nanocomposite adsorbent for wastewater treatment	12
Novel polycarbonate membrane embedded with multi-walled carbon nanotube for water treatment: a comparative study between bovine serum albumin and humic acid removal	12
Fabrication and characterization of core–shell TiO2-containing nanofibers of PCL-zein by coaxial electrospinning method as an erythromycin drug carrier	12
Preparation and characterisation of chitosan extracted from shrimp shell (Penaeus monodon) and chitosan-based blended solid polymer electrolyte for lithium-ion batteries	12
Selective capture of anionic and cationic dyes via chitosan-g-poly-(IA-co-DADMAC)/Fe3O4 polymer composite hydrogel	12
Cassava starch: structural modification for development of a bio-adsorber for aqueous pollutants. Characterization and adsorption studies on methylene blue	12
Swelling equilibria of novel propenamide/2-acrylamido-2-methyl-1-propanesulfonic acid/guar gum/clinoptilolite biohybrid hydrogels and application as a sorbent for BV1 removal	12
Ternary sulfonated graphene/polyaniline/carbon nanotubes nanocomposites for high performance of supercapacitor electrodes	12
Preparation and characterization of methylene bisacrylamide crosslinked pectin/acrylamide hydrogels	12
A new method to measure the three-dimensional solubility parameters of acrylate rubber and predict its oil resistance	12
Molecular brushes based on copolymers of alkoxy oligo(ethylene glycol) methacrylates and dodecyl(meth)acrylate: features of synthesis by conventional free radical polymerization	12
Selective separation of Y(III) from Sr(II) using hybrid polymer: synthesis, characterization, batch and column study	12
Old corrugated box (OCB)-based cellulose nanofiber-reinforced and citric acid-cross-linked TSP–guar gum composite film	12
Fabrication of organo-modified carbon nanotube with excellent heat resistance and preparation of its polymer-based nanocomposite by simple melt compounding	12
Optical, structural and morphological properties of synthesized PANI-CSA-PEO-based GaN nanocomposite films for optoelectronic applications	12
Improving the efficacy of PES-based mixed matrix membranes incorporated with citric acid–amylose-modified MWCNTs for HA removal from water	12
Studies of chemical and mechanical properties of hybrid composites based on natural resin Dammar formulated by epoxy resin	12
Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts	12
Physicochemical properties of zein films cross-linked with glutaraldehyde	12
Review on adsorptive removal of metal ions and dyes from wastewater using tamarind-based bio-composites	11
Design, characterization and evaluation of the drug-loaded chitosan/cerium oxide nanoparticles with pH-controlled drug release	11
Pumice particle interface: a case study for immunoglobulin G purification	11
Removal of Co2+, Cu2+ and Au3+ ions from contaminated wastewater by using new fluorescent and antibacterial polymer as sorbent	11
In vitro release study of ketoprofen-loaded chitosan/polyaniline nanofibers	11
The effect of montmorillonite in graphene oxide/chitosan nanocomposite on controlled release of gemcitabine	11
A Monte Carlo study on attenuation characteristics of colemanite- and barite-containing resources irradiated by 252Cf source against neutron–gamma photon	11
Influence of particle size on physical, mechanical, thermal, and morphological properties of tamarind- fenugreek mucilage biodegradable films	11
Mechanical properties of fabricated hybrid composites infused with Heat-Treated alkali sisal fiber and SiC particles: a quantitative analysis	11
Application of polydopamine on the implant surface modification	11
Synthesis and evaluation of a new three-metallic high-performance Ziegler–Natta catalyst for ethylene polymerization: experimental and computational studies	11
Improve the surface structural and optical properties of PM-355 polymer by alpha particles	11
Characterization of changes in structural, physicochemical and mechanical properties of rigid polyurethane building insulation after thermal aging in air and seawater	11
A novel synthesis of polybutadiene-based polyurethane binder and conductive graphene–polyurethane nanocomposites: a new approach to polybutadiene recycling	11
Designing gelatin-based swellable hydrogels system for controlled delivery of salbutamol sulphate: characterization and toxicity evaluation	11
Radiation synthesis of polyacrylamide/functionalized multiwalled carbon nanotubes composites for the adsorption of Cu(II) metal ions from aqueous solution	11
Highly effective adsorption of copper ions by poly(vinyl imidazole) cryogels	11
Preparation of microencapsulated aluminum hypophosphite and its flame retardancy of the unsaturated polyester resin composites	11
Importance of gelatin, nanoparticles and their interactions in the formulation of biodegradable composite films: a review	11
Preparation of high-performance natural rubber/carbon black/molybdenum disulfide composite by using the premixture of epoxidized natural rubber and cysteine-modified molybdenum disulfide	11
Optical properties and photo-isomerization processes of PMMA–BDK–MR nanocomposite thin films doped by silica nanoparticles	11
Silane functionalization of sodium montmorillonite and halloysite (HNT) nanoclays by ‘grafting to’ method to improve physico-mechanical and barrier properties of LLDPE/clay nanocomposites	11
Synergistic effect of carbon fabric and multiwalled carbon nanotubes on the fracture, wear and dynamic load response of epoxy-based multiscale composites	11
Effect of composition on permeability, mechanical properties and biodegradation of PBAT/PCL blends films	11
A DFT study of vibrational spectra of 5-chlorouracil with molecular structure, HOMO–LUMO, MEPs/ESPs and thermodynamic properties	11
Chitosan: a multipurpose polymer in food industry	11
Synthesis of highly spherical Ziegler–Natta catalyst by employing Span 80 as an emulsifier suitable for UHMWPE production	11
New and innovative microwave-assisted technology for synthesis of guar gum-grafted acrylamide hydrogel superabsorbent for the removal of acid red 8 dye from industrial wastewater	11
Engineering of 3D polymer network hydrogels for biomedical applications: a review	11
Recent trends in industrial and academic developments of green tyre technology	11
Synthesis of the superabsobents enriched in chitosan derivatives with excellent water absorption properties	11
Synthesis, spectroscopic, thermal properties, in vitro release, and stability studies of ibuprofen-loaded microspheres cross-linked with hexachlorocyclotriphosphazene/octachlorocyclotetraphosphazene	11
Development and evaluation of antimicrobial LDPE/TiO2 nanocomposites for food packaging applications	10
Synthesis of chitosan-g-itaconic acid hydrogel as an antibacterial drug carrier: optimization through RSM-CCD	10
Performance evaluation of polypyrrole–montmorillonite clay composite as a re-usable adsorbent for Cr(VI) remediation	10
Accelerated liquefaction of vulcanized natural rubber by thermo-oxidative degradation	10
Ambient curable natural rubber latex adhesive cross-linked with polymeric isocyanate for bonding wood	10
Preparation of sulfonated polyimide/polyvinyl alcohol composite membrane for vanadium redox flow battery applications	10
Synthesis of hydrophobically associating polymer: temperature resistance and salt tolerance properties	10
Detection of damages on biaxial GFRP composite material using non-destructive technique	10
Effective removal of ionic dyes from aqueous media using modified karaya gum–PVA semi-interpenetrating network system	10
Design and preparation of UV-curable waterborne polyurethane based on novel fluorinated chain extender	10
Synthesis and characterization of starch stabilized polyvinyl acetate-acrylic acid copolymer-based wood adhesive	10
Response surface methodology model to optimize concentration of agar, alginate and carrageenan for the improved properties of biopolymer film	10
Worldwide fight against COVID-19 using nanotechnology, polymer science, and 3D printing technology	10
Characterization of a natural rubber based solid polymer electrolyte to be used for a magnesium rechargeable cell	10
A sensitive and smartphone colorimetric assay for the detection of hydrogen peroxide based on antibacterial and antifungal matcha extract silver nanoparticles enriched with polyphenol	10
Thermal, photocatalytic, and antibacterial properties of rGO/TiO2/PVA and rGO/TiO2/PEG composites	10
CuO/LDPE nanocomposite for active food packaging application: a comparative study of its antibacterial activities with ZnO/LDPE nanocomposite	10
Synthesis and characterization of novel semi-IPN nanocomposite hydrogels based on guar gum, partially hydrolyzed poly(acrylamide), and pristine montmorillonite	10