Journal of Adhesion Science and Technology

Papers
(The TQCC of Journal of Adhesion Science and Technology is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-07-01 to 2024-07-01.)
ArticleCitations
An overview of green corrosion inhibitors for sustainable and environment friendly industrial development107
New Heterocyclic Compound as Carbon Steel Corrosion Inhibitor in 1 M H2SO4, High Efficiency at Low Concentration: Experimental and Theoretical Studies91
Advances in FSW and FSSW of dissimilar Al-alloy plates90
Effect of the addition of polypropylene fiber on concrete properties51
A parametric study on the mechanical properties of MIG and TIG welded dissimilar steel joints51
Consequence of reinforced SiC particles on microstructural and mechanical properties of AA6061 surface composites by multi-pass FSP45
Enhancement of adsorption and anticorrosion performance of two polymeric compounds for the corrosion of SABIC carbon steel in hydrochloric acid44
Assessment of erosion rate on AA7075 based surface hybrid composites fabricated through friction stir processing by taguchi optimization approach32
Effect of welding speed and wire feed rate on arc characteristics, weld bead and microstructure in standard and pulsed gas metal arc welding30
Effect of addition of boric acid on thermo-mechanical properties of microcrystalline cellulose/polyvinyl alcohol blend and applicability as wood adhesive30
Two decades of friction stir processing–a review of advancements in composite fabrication29
Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review27
Resistance welding technology of fiber reinforced polymer composites: a review26
Corrosion inhibition performance of dwarf palm andCynara cardunculusleaves extract for St37 steel in 15% H2SO4: a comparative study26
Experimental and theoretical studies ofInula viscosaextract as a novel eco-friendly corrosion inhibitor for carbon steel in 1 M HCl23
In-situmodification of low molar ratio urea–formaldehyde resins with cellulose nanofibrils for plywood23
Loading-rate effect on tensile and bending strength of 3D-printed polylactic acid adhesively bonded joints22
Green and high-efficiency corrosion inhibitors for metals: a review22
Quantum chemical and molecular dynamics simulation approach to investigate adsorption behaviour of organic azo dyes on TiO2 and ZnO surfaces22
Density functional theory, Monte Carlo simulation and non-covalent interaction study for exploring the adsorption and corrosion inhibiting property of double azomethine functionalised organic molecule22
Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints22
Novel heterocyclic quinoline derivatives as green environmental corrosion inhibitors for carbon steel in HCl solution: experimental and theoretical investigation21
Experimental and theoretical analysis of baclofen as a potential corrosion inhibitor for mild steel surface in HCl medium21
Predicting the ultimate tensile strength and wear rate of aluminium hybrid surface composites fabricated via friction stir processing using computational methods20
N-hydroxypyrazine-2-carboxamide as a new and green corrosion inhibitor for mild steel in acidic medium: experimental, surface morphological and theoretical approach20
Effects of tool pin profile and feed rate on wear performance of pine leaf ash/Al composite prepared by friction stir processing20
Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study20
Synergistic effect of salts on the corrosion inhibitive action of plant extract: a review20
Developments in friction stir welding of aluminium to magnesium alloy19
Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys19
Modification of microstructure, hardness, and wear characteristics of an automotive-grade Al-Si alloy after friction stir processing18
Superior potentials of hydrazone Schiff bases for efficient corrosion protection of mild steel in 1.0 M HCl18
A study of the inhibitive effect for corrosion of steel in 1.0 M HCl using a new nonionic surfactant based on coumarin moiety: chemical, electrochemical and quantum mechanics calculations18
Effect of material positioning on Si-rich TIG welded joints of AA6082 and AA8011 by friction stir processing18
Effects of graphene oxide addition on wear behaviour of composite coatings fabricated by plasma electrolytic oxidation (PEO) on AZ91 magnesium alloy17
Hybrid and adhesively bonded joints with dissimilar adherends: a critical review16
A review of nanoparticle reinforced surface composites processed by friction stir processing16
Mechanical and thermal properties of graphene and carbon nanotube reinforced epoxy/boron nitride adhesives16
Recent advances in laser-cladding of metal alloys for protective coating and additive manufacturing16
Corrosion inhibition of API 5L X-52 pipeline steel in oilfield acidizing solution by gentamicin and sulfamethoxazole: experimental, plane-wave density functional theory (PWDFT) and the generalized-gra16
Superhydrophobic surfaces and coatings by electrochemical methods – a review16
Effect of expired paracetamol–Zn+2system and its synergistic effect towards iron dissolution inhibition and green inhibition performance15
Corrosion inhibition assessment on API 5L X70 steel by preussomerin G immersed in saline and saline acetic15
Influence of travel speed on the microstructural evaluation and mechanical characteristics of bobbin tool friction stir-welded thick AA5456-H112 plates15
Development of dissimilar AA2014 and AA2024 based composite with nano-Si 3 N 4 reinforcement by friction stir process technique15
Selection of friction stir welding tool rotational speed for joining dual phase DP600 steel sheets – an experimental approach15
Silicone oil infused slippery candle soot surface for corrosion inhibition with anti-fouling and self-healing properties15
Parametric analysis of processing variables for enhanced adhesion in metal-polymer composites fabricated by fused deposition modeling15
Application of ascorbic acid as green corrosion inhibitor of reinforced steel in concrete pore solutions contaminated with chlorides15
Effect of cyclic hygrothermal aging on mechanical behaviours of adhesive bonded aluminum joints15
Influence of filler content and surface modification on physical and mechanical properties of epoxy/walnut shell particulate composites14
Exploring the potential of metal-cored filler wire in gas metal arc welding for ASME SA387-Gr.11-Cl.2 steel joints14
Joining behavior of polymeric composites fabricated using agricultural waste as fillers14
A review on current additive manufacturing technologies and materials used for fabrication of metal-ceramic fixed dental prosthesis14
Synergic influence of fly ash and graphene oxide-carbon nanotubes hybrid on mechanical, microstructural and porosity properties of cement mortars14
Comprehensive analysis on influences of aggregate, asphalt and moisture on interfacial adhesion of aggregate-asphalt system13
Enhancing shear strength and structural stiffness of composite joint with carbon nanotube reinforced adhesive through co-bonding technique13
Application of atomic force microscopy in adhesion force measurements13
Influence of nano-cementitious materials on improving the corrosion resistance and microstructure characteristics of concrete13
Synthesis, characterization and anti-corrosion properties of two new Schiff bases derived from diamino diphenyl ether on carbon steel X48 in 1M HCl12
Recent progress in epoxy resins as corrosion inhibitors: design and performance12
Experimental and theoretical study on corrosion inhibition of pyridinium salts derivatives for API 5L Gr.B steel in acidic media12
Large scale preparation of polyaniline/polyvinyl alcohol hybrid films through in-situ chemical polymerization for flexible electrode materials12
Performance research of fiber-reinforced asphalt rubber as a stress-absorbing membrane interlayer12
A review of the effects of wood preservative impregnation on adhesive bonding and joint performance12
Concrete anti-carbonation coatings: a review12
Electrochemical and theoretical studies of some monoterpenic thiazolidinones as corrosion inhibitors for steel in acidic media12
A comparative study on the rheological, thermal, and mechanical performance of epoxy resin modified with thermoplastics12
Investigation of bead morphology and mechanical behaviour for metal inert gas welding-based WAAM in pulsed mode metal transfer on 316LSi stainless steel11
One-step plasma deposited thin SiOxCy films for corrosion resistance of low carbon steel11
Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review11
Synergistic effect of potassium iodide on corrosion inhibition of copper by tetraphosphonic acid in hydrochloric acid solution11
Electrophotography toner adhesion on agro-industrial residue and invasive plant papers11
In-situ formation of Zn oxide particles in CuZn matrix during friction stir processing11
Optimizing the mechanical properties of Al-SS joint using the numerical and experimental investigation of electromagnetic welding10
Optimization of FSP parameters to fabricate AA7075-based surface composites using Taguchi technique and TOPSIS approach10
Synthesis of bio-based nickel nanoparticles composite, characterization and corrosion in hibition in simulated oilfield microbial and acidizing environments10
Current modifications of dental adhesive systems for composite resin restorations: a review in literature10
Preparation of photo-crosslinkable acrylic copolymer and its debonding property on silicon wafer10
Evaluation of the adhesion property and moisture stability of rubber modified asphalt mixture incorporating waste steel slag10
Sensitivity analysis of the MIG welding process parameters based on response surface method10
Intrinsic electronic property and adsorption of organic molecules on specific iron surface: an ab initio DFT and DFTB study10
Effect of molecular chain length on the tribological properties of two diazomethine functionalised molecules as efficient surface protective lubricant additive: experimental and in silico inves10
Comparison of the wood bonding performance of water- and alkali-soluble cottonseed protein fractions10
Development of green adhesives for fiberboard manufacturing, using okoume bark tannins and hexamine – characterization by 1H NMR, TMA, TGA and DSC analysis10
A two-step bonding process for preparing 6061/AZ31 bimetal assisted with liquid molten zinc interlayer: the process and microstructure10
Anticorrosive potential of essential oil extracted from the leaves of Calamintha plant for mild steel in 1 M HCl medium10
Investigation of recycling repetition effect on deinkability efficiency and printing properties10
Preparation, characterization, and compatibilization of novel rubber nanocomposites for mechanical applications: relationship between electrical properties, morphology, and rheology9
Laser-cladding and robotic hammer peening of stainless steel 431 on low alloy steel 4140 for surface enhancement and corrosion protections9
Inhibition efficiency of pyrazinecarboxylic acid on mild steel in acidic environment9
An experimental investigation on mechanical characteristics and wear behaviour of TIG welded dissimilar aluminum alloys9
Natural triterpenoids of Ganoderma lucidum as new, green, and effective corrosion inhibitor for steel in acidic medium: characterization, experimental and theoretical investigations9
Natural rubber latex-based adhesives: role of nanofillers9
Numerical simulation and experimental research on friction stir welding of 2024-T3 aeronautical aluminum alloy9
Mild steel green inhibition by Hardwickia binata Roxb. leaves extract in acid medium9
Optimization of processing variables of friction stir welded dissimilar composite joints of AA6061 and AA7075 using response surface methodology9
Preparation of durable superamphiphobic cotton fabrics with self-cleaning and liquid repellency9
Effect of material position on microstructure and mechanical properties of friction stir welded dissimilar austenite–ferrite stainless steels joints9
Pre-oxidation of selective-laser-melted titanium dental alloy: effects on surface characteristics and porcelain bonding9
Preparation of self-healing superhydrophobic cotton fabric based on silica aerogel for self-cleaning and oil/water separation9
Reversible adhesive based on self-repair behavior9
Micro-nano interfacial mechanical interlocking structure-property of the ultrasonic-assisted hot press molded polypropylene/aluminum alloy hybrid9
Self-assembled monolayers of novel imidazole derivative on copper surface for anticorrosion protection in neutral medium9
Microstructural, mechanical and tribological characterization of ZrB2 reinforced AZ31B surface coatings made by friction stir processing9
Corrosion inhibition abilities of phytochemicals: a combined computational studies9
Development of environmentally friendly epoxy and composite adhesives and applications in single and mixed-modulus joints9
Some polymeric imidazolates from alkylimidazolium as corrosion inhibitors of API 5L X52 steel in production water9
Polyaniline/graphene oxide/Zn-doped TiO2 nanocomposite coatings for the corrosion protection of carbon steel9
Performance of prestressed concrete beams using magnetic water for concrete mixing9
Effect of fiber surface modifications on the interfacial adhesion in kevlar fiber reinforced polymer composites9
Chloride threshold value to initiate steel corrosion in simulated concrete pore solution, and the effectiveness of DMEA as an amino-alcohol-based corrosion inhibitor9
Mechanical behavior of silty sand reinforced with nanosilica-coated ceramic fibers8
Estimation of deformation behaviour at different weld zones of FSWed 2014 aluminium alloy through impression creep technique8
A critical review on mechanical and microstructural properties of dissimilar aluminum (Al)-magnesium (Mg) alloys8
Effect of fiber content and plasticizer on mechanical and joint properties of carbon fiber powder reinforced PLA manufactured by 3D printing process8
Effect of alkyl chain length on the corrosion inhibition of mild steel in a simulated hydrochloric acid medium by a phosphonium based inhibitor8
Corrosion inhibition of reinforcement steel in mixture water by caffeine and L-arginine8
Dentin/composite bond strength: effect of aging and experimental unit8
Improved mechanical properties of resistance welded joints of thermoplastic composites by versatile graphene oxide8
Synergistic corrosion inhibition of low carbon steel in HCl and H2SO4 media by 5-methyl-3-phenylisoxazole-4-carboxylic acid and iodide ions8
Does Al2O3 airborne particle abrasion improve repair bond strength of universal adhesives to aged and non-aged nanocomposites?8
Corrosion inhibition mechanism and extraction technology of plant corrosion inhibitors: a review8
Shear bond strength of cemented zirconia-reinforced lithium silicate ceramics (Celtra Duo) with two surface treatments (in vitro study)8
Low-velocity impact and bending response of graphene nanoparticle-reinforced adhesively bonded double strap joints8
Bonding strength and microstructural features of Al5083-AZ31B alloys laminated sheet through friction stir additive manufacturing8
Preparation and characterization of polyacrylate emulsion pressure-sensitive adhesives with various lengths of fluorinated side chains8
Surface modification of bio-based composites via silane treatment: a short review8
Optimization of plasma treatment parameters to improve the wood-coating adhesion strength using Taguchi integrated desirability function approach8
Effect of travel speed and number of layers on surface waviness of ER70S6 deposits fabricated through non-transferred wire arc additive manufacturing7
Influence of rice husk on the properties of fiber-reinforced silicon sol shells used in investment casting process7
Application of titanium dioxide nanoparticles for the design of oil well cement slurry – a study based on compressive strength, setting time and rheology7
Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding7
The inhibitory action of 3-phenyl-isoxazoline-carvone on carbon steel in HCl solution was investigated experimentally and theoretically7
The corrosion behavior of the SnO2-coated mild steel in HCl solution at different temperature7
Durable superamphiphobic cotton fabrics with improved ultraviolet radiation resistance and photocatalysis7
Evaluation of the corrosion inhibition of mild steel by newly synthesized imidazo[1,2-a]pyridine derivatives: experimental and theoretical investigation7
Mechanical performance of concrete strengthened by modified epoxy resin bonded CFRP7
Evaluation and optimization of various treatment methods for enhancing the properties of brick-concrete recycled coarse aggregate7
Forming mechanisms and mechanical property of AZ31B/2024-T4 friction stir welded T-joints7
Dissimilar welding of AA5083/AA7039 by self-reacting friction stir welding7
Bond behavior between near-surface mounted fiber reinforced polymer strips and concrete using nonlinear finite element: a parametric study7
Composites of polyanine/CdTe for corrosion protection of mild steel XC 70 in a 3.5% NaCl solution7
Synthesis and properties of reactive polyurethane hot melt adhesive based on a novel phosphorus-nitrogen-containing polyol7
On post-fire bond strength of steel rebar embedded in thermally-damaged concrete – a review7
Generation of force and torque during joining of AZ91C plates by FSW under distinctive tool tilt angle and their impact on mechanical strength and micro-structure7
Investigations on the effect of plasma treatment on the adhesive bonding behavior of ultra high modulus K13C2U/cyanate ester fiber composites7
Assessment of new designed surfactants as eco-friendly inhibitors for the corrosion of steel in acidic environment and evaluation of their biological and surface features: thermodynamic, kinetic and m7
Effects of material properties on the mechanical and durability behaviors of Khorasan mortar mixtures: a review7
Research on the corrosion behavior of double-side friction stir welded 6082Al alloy thick plate7
Improved Muller approximate solution of the pull-off of a sphere from a viscoelastic substrate7
Quantifying corrosion inhibition on mild steel surface using run length statistics-based texture analysis7
Bond behavior of deformed steel bars in self-compacting concrete7
Spot welding of Al-Cu sheets using the electromagnetic pulse for improving the quality of joints7
Effect of fiber surface modifications on the properties of snake grass fiber reinforced polypropylene bio-composites6
Microtensile dentin bond strength and interface morphology of different self-etching adhesives and universal adhesives applied in self-etching mode6
Corrosion inhibition, adsorption and thermodynamic properties of hydrophobic-tailed imines on carbon steel in hydrochloric acid solution: a comparative study6
Enhancement of microstructure and mechanical properties of similar and dissimilar aluminium alloy by friction stir welding/processing using nanoparticles: a review6
Influence of the maturity ofMusa paradisicapeels on mild steel corrosion in sulfuric acid6
Preparations of iron-based alloy coatings on grey cast iron through plasma transfer arc welding6
Chronological history and current advancements of dental adhesive systems development: a narrative review6
Electropolymerized durable coatings deposited onto Pt-electrode as corrosion inhibitor for mild steel6
Improving the mechanical performance of adhesively bonded CFRP composite joints exposed to harsh mediums with the reinforcement of boron nanostructures6
Electrochemical and surface analytical studies of transition metal bipyridine dicarboxylic acid complexes as corrosion inhibitors for a mild steel in HCl solution6
Synergistic effect of 4-dimethylaminopyridine with sodium dodecyl sulfonate and potassium bromide on the corrosion inhibition of mild steel in HCl medium: a collective experimental and computational i6
Enhancement in bonding strength and ageing resistance of polychloroprene solvent-base adhesives through graft copolymerization6
External surfactant-free waterborne polyurethane grafted fluorine-containing acrylic copolymer with high hardness and low water absorption using chlorinated soybean oil-based urethane acrylate as poly6
A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers6
Influence of voltage modes on microstructure and corrosion resistance of micro-arc oxidation coating on magnesium alloy6
Effects of anionic monomer type of water-reducing admixture on fresh properties, compressive strength and water adsorption of self-compacting concrete6
Experimental study on rheological properties of cement mortars6
Mechanical properties of low and regular viscosity bulk fill composites in a 3D dentin cavity model6
Experimental methodology and predictive tools in austenitic stainless steel with different ferrite content welds6
Formulation, structure and properties of waterborne polyurethane coatings: a brief review6
Redefining stickiness – A reflection on the gecko inspired adhesives possessing self-cleaning traits6
Phenylethynyl terminated polyimide resin/carbon fiber composite catalytic cured at 300 °C and its performance6
Effect of universal adhesive application on bond strength of four-year aged composite repair6
Adhesion enhancement between aluminum and butyl rubber by (3-mercaptopropyl) trimethoxy silane for vibration damping plate6
Sour corrosion of C1018 carbon steel and its inhibition by 1–benzylimidazole: electrochemical, SEM, FTIR and computational assessment6
Influence of silane coupling agent and aging on the repair bond strength of dental composites6
The effect of nitrogen plasma treatment on adhesive properties of PEEK6
Effect of cold plasma spray on microshear bond strength of repair composite resin in comparison with other surface treatments6
Porosity-grain growth relationships in the laser beam deep penetration welding of 6061 aluminum alloy6
Influence of polymerizable surfactants on the adhesion performance and water resistance of water-based acrylic pressure-sensitive adhesives (PSAs)6
Macro- and microstructure analysis and mechanical characteristics of thick AlMg5 alloy plates joined by floating-bobbin friction stir welding6
How does rheological behaviour affect the interlayer-bonding strength of 3DPC mixtures?6
0.063099145889282