Mechanics of Materials

Article	Citations
An additive Mori–Tanaka scheme for elastic–viscoplastic composites based on a modified tangent linearization	108
In-plane elastic waves in piezoelectric metamaterials with Parity–Time symmetry	84
A virtual scale approach to multi-scale calculations and its application in fiber-reinforced composites	62
Efficient prediction of strength and strain localisation in porous solids via microstructure-based limit analysis	62
Influence of uniform temperature variations on hybrid bonded joints with a circular or tubular cross-sectional area	59
Editorial Board	57
Peridynamic investigation of dynamic damage behaviors of PBX confined in spherical steel shells	57
Experimental investigation of the behaviour of a simulant material for plastic-bonded explosives and modelling of the effectivity and damage induced anisotropy	52
Formulation for zirconia toughened alumina (ZTA) reinforced metal matrix composites based on a three-phase concentric inclusion model	50
Propagation and scattering of SH waves in non-homogeneous unsaturated half-space with a circular cavity	49
Predicting the double-yield phenomenon in low-density polyethylene film using three-network viscoplastic model	48
Evaluation of NiTi under low-amplitude cyclic loading by means of thermographic harmonic analysis	48
Liquid metal-filled phase change composites with tunable stiffness: Computational modeling and experiment	47
Modeling for the role of fiber–matrix coupling on the torsion-induced Poynting effect in biological tissues	45
A simple design rule for variable thickness shell based architected materials with improved stiffness	44
Stimuli–responsive programmable mechanics of bi-level architected nonlinear mechanical metamaterials	43
Rigorous analysis and pragmatic guidelines in estimating strain rate sensitivity using stress relaxation test	43
A damage model of characterizing the internal damage evolution for DN hydrogel using Multi-Particle Tracking (MPT) method	42
A micropolar approach to microbuckling problems in unidirectionally reinforced polymer composites	41
A concurrent multiscale simulation for nonlinear flexural and postbuckling analyses of single-layer graphene sheets at finite temperature	39
Mechanics and modeling of cold rolling of polymeric films at large strains — A rate-independent approach	38
Lithiation-induced stress and damage in electrode materials: Effects of current variations	38
Multifunctional design of lattice metamaterial with desired thermal expansion behaviors using topology optimization	37
Multiscale modeling of materials: Computing, data science, uncertainty and goal-oriented optimization	37
Curing-dependent thermo-viscoelastic and shrinkage behaviour of photopolymers	37

Instability of nanoribbons on concave substrates	37
Interfacial heat transfer characteristics and thermal expansion behavior of heterostructure materials in arc-heated wind tunnel	37
Effect of damage evolution on the auxetic behavior of 2D and 3D re-entrant type geometries	36
Mechanical properties and deformation mechanisms of single crystal Mg micropillars subjected to high-strain-rate C-axis compression	35
Anisotropic tensile behaviour of additively manufactured Ti-6Al-4V simulated with crystal plasticity	34
Atomistic vs. continuum models of nanoporous elastic solid: Stress fields, size-dependent effective stiffness and surface constants	34
A micromechanical study of damage effect on the temperature dependent yield strength of particle-reinforced metal matrix composites	34
A multiscale analysis framework for formation and failure of the thermoplastic interface	34
GHz surface waves in Al/LiTaO3/Si composite: Effect of the Drude electrode on dispersion, attenuation and mode shapes	33
Statistical volume-based failure prediction of a quasi-brittle epoxy resin	33
Numerical and analytical study to the uniqueness problem in identification of uniaxial parameters through spherical indentation	33
Elastoplastic damage analysis and structural optimization of soluble bridge plug based on phase field method	32
A new multiscale model for ferroelectric materials considering hysteresis	31
Artificial neural network model of the mechanical behaviour of shape memory alloy Schwartz primitive lattice architectures	31
Micromechanical modeling of the effects of crystal content on the visco-hyperelastic-viscoplastic behavior and fracture of semi-crystalline polymers	31
Editorial Board	31
Mechanical properties of unidirectional bio-inspired composites with two non-self-similar hierarchical structures	30
Multiscale framework for estimation of elastic properties of Poly ethylene terephthalate from the crystallization temperature	30
The effect of initial texture on multiple necking formation in polycrystalline thin rings subjected to dynamic expansion	30
Effect of porous microstructure and fiber arrangement of thermal protection composites on effective thermal conductivity	29
Micro-mechanical properties characterization of shot peening strengthened layer with nanoindentation	29
Shape transformers for crashworthiness of additively manufactured engineering resin lattice structures: Experimental and numerical investigations	29
Constitutive modeling, computational implementation and material parameter identification for polymeric foams considering density and foaming direction	28
Stress effects on interaction modes and cross-slip annihilation distance of screw dislocation interactions	28
Enhancing robustness in machine-learning-accelerated molecular dynamics: A multi-model nonparametric probabilistic approach	28
Mechanical properties of graphene nanoplatelets containing random structural defects	28
Examining the impact of asymmetry in lattice-based mechanical metamaterials	27
Rational design of hyperelastic semi-linear material and its application to elastic wave control	27
Micromechanics-based constitutive modeling of hard-magnetic soft materials	27
Spall characteristics of three-dimensional graphene networks with embedded copper: A molecular dynamics study	26
Recrystallization mechanisms, grain refinement, and texture evolution during ECAE processing of Mg and its alloys	26
Low cycle fatigue behaviour of engineering metallic materials: Review on cyclic deformation micro-mechanism	26
Mechanical behavior and constitutive model of NEPE solid propellant in finite deformation	26
Computation of energy evolution during the dynamic fracture of elastomers using the finite viscoelastic model: Its implementation in Abaqus	26
Determination of elastoplastic properties in anisotropic materials with cubic symmetry by instrumented indentation	26
Atomistically calibrated Tsai-Wu criterion for orthotropic layered 2D materials and interpreting accuracy – A study on failure of hBN	25
On the yield criterion of two-scale porous materials by using Eshelby-type velocity field and Steigmann–Ogden surface model	25
Investigating surface effect on stress concentration in amorphous carbon materials with nano-scale pores: A molecular dynamics study	25
Editorial Board	25
Understanding the torsional mechanical behavior of twisting carbon nanotube ribbon with different boundary conditions	25
Editorial Board	24
Modeling the impact of glass transition on the frequency-dependent complex conductivity of CNT-polymer nanocomposites	24
Mechanical performances and coupling design for the mechanical metamaterials with tailorable thermal expansion	23
Axisymmetric necking of a circular electrodes-coated dielectric membrane	23
Tailorable piezoelectric and flexoelectric output of a polymer-particle composite	23
Numerical simulation of band gap characteristics for periodically arranged curvilinear fiber laminated plates	22
The cylindrical mechanical metamaterial with high-level thermal-mechanical stabilities and high dynamic stiffness	22
Resisting room-temperature creep in titanium alloys by pre-compression	22
On the application of Physically-Guided Neural Networks with Internal Variables to Continuum Problems	22
Supershear cracks appear along weak interface in semi-regular lattices under pre-tension	22

On modeling fracture of soft polymers	22
Editorial Board	21
Spontaneous bi-stability of liquid crystalline solid beams and state transitions via snap-through buckling	21
Two competitive ignition mechanism for dynamic extrusion-shear loaded high-energy propellant	21
Nonlocal model of electromechanical fields and effective properties of piezoelectric materials with rigid and electrically conductive inclusions	21
A finite deformation constitutive model for brain white matter considering the time-dependent and damage behaviors of matrix and axonal fibers	21
Failure analysis of unidirectional FRP with fiber clusters under transverse pure shear	20
Closed form solutions for the strain localization problem in a softening circular bar in pure torsion with the continuum damage and the embedded discontinuity models	20
Electro-mechanical-carrier coupling model of single piezoelectric semiconductor fiber pull-out	20
The influence of ambient temperature and X-band frequency on EMI shielding performance of graphene/silica nanocomposites	20
Editorial Board	20
Soft orthotropic hyperelastic lattice structures: Numerical homogenization and experimental validation	20
Phase field modeling of thermal fatigue crack growth in elastoplastic solids and experimental verification	20
Governing failure mechanisms of simplified three-way dendritic branch under compressive load	19
Mechanism and prediction of screw dislocation strengthening by interstitials in advanced high-strength steels: Application to Fe–C and Fe–N alloys	19
Planar metamaterial with sign-switching Poisson's ratio based on self-contact slits	19
Elastic unidirectional cylindrically-symmetric-fiber composites with general radially-variable anisotropic coatings	19
4D local investigation of mechanical behavior of open-cell foams by enhanced morphological analysis and microstructure-adapted digital volume correlation for tribology applications	19
Constitutive modelling of plastically deformable self-healing materials	19
Effect of Microdamage on the Failure of Open-Hole UD GFRP Laminates: A Combined Experimental and Numerical Study	19
Editorial Board	19
Machine-learned prediction of the electronic fields in a crystal	19
Warren truss inspired hierarchical beams for three dimensional hierarchical truss lattice materials	19
A modified constitutive model for whole-life thermal-mechanical fatigue incorporating dynamic strain aging in 316LN stainless steel	18
Two-temperature thermodynamics and a viscoplasticity model for FCC metals with grain boundary effect	18
Bioinspired diamond composites and their dynamic shock performance	18
Kinematic and thermal characteristic of discontinuous plastic flow in metastable austenitic stainless steels	18
Correlation between the ratio between the tensile and shear yield strength on porosity evolution in isotropic ductile materials	18
Fundamental formulation for anti-plane eigenstrain problems	18
Nonlinear elastic analysis of 2D materials of arbitrary symmetries with application to black phosphorus	18
Editorial Board	18
Multiple elastic or rigid line inclusions in a multilayered orthotropic solid	18
DLP printed 3D gyroid structure: Mechanical response at meso and macro scale	18
Determination and analysis of the constitutive parameters of temperature-dependent dislocation-density-based crystal plasticity models	17
Rules to identify and track the evolution dynamics of {10	17
Bridged structures in ultrathin 2D materials for high toughness.	17
Acoustic emission signal processing for the assessment of corrosion behaviour in additively manufactured AlSi10Mg	17
Size-dependent parametrisation of active vibration control for periodic piezoelectric microplate coupled systems: A couple stress-based isogeometric approach	17
Ductile rupture under cyclic loadings at high triaxiality: The influence of strain hardening and elasticity	17
Crystallization-induced residual deformation evolution in thermoplastics during material extrusion and subsequent annealing	17
Editorial Board	17
When invariants matter: The role of I1 and I2 in neural network models of incompressible hyperelasticity	17
A semi-analytical approach to mode-I stress intensity factor and fracture energy of a circular crack in a poroviscoelastic medium	17
Atomistic investigation on the anisotropic elastic and plastic responses of nanotwinned metals	16
On the interaction of grain-scale and hydride-scale stresses in hydrogen enriched zirconium alloy nuclear cladding via combined discrete dislocation plasticity and crystal plasticity finite element mo	16
Directional dependence of the mechanical properties of aged paper	16
A combinatorial approach to the elastic response of electrospun mats: Architectural framework and single fiber properties	16
Crystal-scale modelling of pore collapse in cyclotetramethylene tetranitramine (HMX) under different shock strengths	16
Constitutive modeling of damage-induced stress softening in electro-magneto-viscoelastic materials	16
A constitutive model for Cemented-Sand-Gravel (CSG) materials based on strength characteristics	16
Active compliant mechanisms for optimized actuation by LCE-based artificial muscles	16
A comparative study of void characteristics on the mechanical response of unidirectional composites	16
Compression of filled, open-cell, 3D-printed Kelvin lattices	16
Deep learning-assisted prediction of mean grain size of polycrystalline materials from ultrasonic wave response	16
A statistical high-order reduced model for nonlinear random heterogeneous materials with three-scale micro-configurations	16
Substantial curvature effects on compliant serpentine mechanics	16
Thermodynamically consistent Recurrent Neural Networks to predict non linear behaviors of dissipative materials subjected to non-proportional loading paths	16
Effects of thermal treatments on the fracture behaviour of a silica-filled NBR: A study on the recovery of the Mullins effect and on the stretch-induced cavity formation	16
Modeling the effect of creep in paper fibres under the influence of external loading and changes in moisture	15
Incremental sequential homogenization on effective elastoplastic properties of composites with functionally graded interphase	15
Traction–separation law for bridged cracks at immiscible polymers interface	15
Actuated three-dimensional shapes of discretely patterned orthogonal nematic bilayers	15
Editorial Board	15
Contributing factors to preterm pre-labor rupture of the fetal membrane: Biomechanical analysis of the membrane under different physiological conditions	15
Constitutive modeling of diffusion-limited oxidation coupled with a large deformation theory for polymer degradation	15
Gradient microstructure evolution of high-strength alloy steel induced by shot peening	15
Microscale model for intergranular and transgranular damage and fracture in polycrystalline ceramics	15
Local measurement on oedometric compression tests: Time and temperature ageing effects on a fluorosilicone	15
A piecewise recursive semi-analytical method for effective evaluation of heterogeneous aging viscoelastic materials	14
Mechanical behaviour and constitutive modelling of an additively manufactured stereolithography polymer	14
Geometric effects on impact mitigation in architected auxetic metamaterials	14
Additive manufacturing structural redesign of hip prostheses for stress-shielding reduction and improved functionality and safety	14
Buckling behavior and damage mechanism analysis of fiber-reinforced shape memory polymer composites	14
Mechanical modelling of viscoelastic hierarchical suture joints and their optimisation and auxeticity	14
A unified numerical approach for soft to hard magneto-viscoelastically coupled polymers	14
High temperature nano-indentation on the mechanical properties of Zr and Zr–Fe alloys: Experimental and theoretical analysis	14
Shock loading of carbon nanotube bundle	14
Enhanced mechanical and thermal properties in 3D printed Al2O3 lattice/ epoxy interpenetrating phase composites	14
Multi-scale description of hydro-mechanical coupling in swelling clays. Part II: Poroplasticity	14
Scattering of mechanical waves from the perspective of open systems	14

An adaptive multi-temperature isokinetic method for the RVE generation of particle reinforced heterogeneous materials, Part II: Numerical assessment and statistical analysis	14
Electrical conductivity of porous binary powder mixtures	14
The effect of magnetic field parameters on fibre orientation in high-performance fibre-reinforced concrete	14
Predicting multiple fatigue properties of twinning-induced plasticity steels by black-box and white-box machine learning	13
Modeling the thermo-responsive behaviors of polydomain and monodomain nematic liquid crystal elastomers	13
Non-iterative stress projection method for anisotropic hardening	13
A multiscale tensile failure model for double network elastomer composites	13
A micromechanical model for the swelling effect on visco-super-elastic and damage self-healing behaviors of hydrogels reinforced by nanoparticles	13
New double surface constitutive model of intermittent plastic flow applied to near 0 K adiabatic shear bands	13
3D auxetic metamaterials with tunable multistable mechanical properties	13
The influences of temperature on the macroscopic elastoplastic behaviors of heterogeneous materials	13
Mechanical properties of tetragraphene single-layer: A molecular dynamics study	13
Non–symmetric transmission of nonlinear elastic waves across a corrugated interface between two half–spaces	13
Topological boundary states in micropolar gyroelastic continua	13
Preserving non-negative porosity values in a bi-phase elasto-plastic material under Terzaghi’s effective stress principle	13
Unusual temperature dependent core properties of <110> superdislocation in Ni3Al by ab initio results-informed fully discrete Peierls-Nabarro model	13
Modeling the thermo-oxidative aging effects on fatigue life of natural rubber using a continuum damage mechanics approach	13
On the development of a constitutive model for steel subjected to fire and explosion	13
Design of partially covered bilayer thin film actuators	13
The role of accumulated plasticity on yield surface evolution in pearlitic steel	13
Large deformation adhesion study of polymetric hydrogel under different stimuli	13
Prediction of viscoelastic effective creep compliances in cracked cross-ply composite laminates	13
The role of crystal orientation in cracking performance of HCP magnesium single crystals	13
Characterization and modeling of the damage mechanisms in ductile steel metal-matrix composites: Application to virtual forming	12
New aspects of a single-crystal gradient plasticity model: Rate-dependency of size-dependent response	12
Subcritical growth of a crack interacting with the stress field of mobile solutes in an elastic solid in the presence of image effects: A kinetic Monte Carlo study	12
An analytical and experimental investigation into overall dissipation of flexural mode in a periodically damped beam	12
A novel metamaterial with instantaneously sign-switchable coefficient of thermal expansion and Poisson's ratio	12
A bounding surface viscoplastic damage model for time-dependent rock deformation	12
Deformation of nucleated cells driven by ultrasonic standing waves	12
Corrigendum to “Representative volume element: Existence and extent in cracked heterogeneous medium” [Mech. Mater. 184 (2023) 104748]	12
Programmable deformation of liquid crystal elastomer plates subjected to concentrated light illumination	12
Inverse-designed growth-based cellular metamaterials	12
Mechanical attributes and wave propagation characteristics of TPMS lattice structures	12
Constitutive models for confined elastomeric layers: Effects of nonlinearity and compressibility	12
Embedding strain-rate sensitivities of multiple deformation mechanisms to predict the behavior of a precipitate-hardened WE43 alloy under a wide range of strain rates	12
Bicrystallography-informed Frenkel–Kontorova model for interlayer dislocations in strained 2D heterostructures	12
Band-structure calculation of SH-waves in 1D hypersonic nano-sized phononic crystals with deformable interfaces	12
Corrigendum to ‘A micro-mechanical model of reinforced polymer failure with length scale effects and predictive capabilities. Validation on carbon fiber reinforced high-crosslinked RTM6 epoxy resin’ [	12
On the dependence of orientation averaging mean field homogenization on planar fourth-order fiber orientation tensors	11
Probabilistic progressive damage modeling of hybrid composites	11
A yield function based on stress invariants and its extensions: Modeling and validation	11
Exploring the alloying effects on generalized stacking fault energy and ideal strength of Ni and Ni3Al phases in Ni-based superalloys	11
Tuning structural and mechanical anisotropy of PVA hydrogels	11
Interface temperature evolution and bonding characteristics analysis induced by microparticle impact	11
Dynamic effective properties of piezoelectric composites with inclusions in arbitrary orientations	11
Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8	11
Critical analysis of generalized Maxwell homogenization schemes and related prospective problems	11
A molecular dynamic investigation of cyclic strengthening mechanism of Ni-based single crystal superalloy	11
A variational method for the simulation of hydrogen diffusion in metals	11
Generalized thermoelasticity of microstructures: Lord-Shulman theory with modified strain gradient theory	11
DIC-based approach to predict post necking behavior for AA6061, AA7075 and their friction stir welded joints	11
Coupling between elastic waves and magnetic spin waves in saturated ferromagnetoelastic plates	11
Equivalent Inclusion Method (EIM) for isotropic and anisotropic spatially oriented spheroidal inhomogeneities: A unified calculation module validated via comparisons to Finite Element (FE) simulations	11
Non-linear homogenization of polymer composites with porous inclusions	11
Soil-expended seismic metamaterial with ultralow and wide bandgap	11
Criteria for mode shape tracking in Micropolar-Cosserat periodic panels	11
Deformation and delamination of dynamically bulging bilayered films	11
Editorial Board	11
Influence of the cell size and wall thickness on the compressive behaviour of fused filament fabricated PLA gyroid structures	11
Relating stiffness changes in porous materials to the evolution of pore space	11
Modelling of hydrogen-assisted damage at the deforming single crystal crack-tip	11
Editorial Board	10
Attention-enhanced deep learning for stress-strain response prediction and inverse design of random porous materials	10
Chirality in topologically interlocked material systems	10
The interfacial behavior of an axisymmetric film bonded to a graded inhomogeneous substrate	10
A method to design stone structures based on origami	10
The effect of specimen thickness on the dislocation-free zone model of fracture	10
Mechanism of nanoscale helium bubbles influencing dynamic tensile response of polycrystalline copper	10
Energy model of transformation of two-time decomposition mode of dislocation structure at triple junction: Ultra-fine grained materials	10
Higher-order indentation model based on mixture unified gradient with surface elasticity: A theoretical study	10
Carbon nanotubes as a basis of metamaterials and nanostructures: Crafting via design optimization	10
On-the-fly adaptive sampling strategy for data-driven computational mechanics: Applications to computational homogenisation	10
Editorial Board	10
A poroelastic model of the optic nerve shows a significant effect of fluid pressure on the nerve fibers	10
Bifurcation and bistability in pneumatically actuated periodically porous elastomers	10
Editorial Board	10
The most severe imperfection governs the buckling strength of pressurized multi-defect hemispherical shells	10
Damage model of unsaturated frozen soil while considering the influence of temperature rise under impact loading	10
Phase-field study of the solutes-interstitial loops interaction in Fe–Cr alloys	10
An alternative shear lag model for composites with discrete interfaces	10
Thermodynamically consistent strain hardening variable/driving force, inelastic stored energy and self-heating in dynamic plasticity	10
Finite deformation viscoelastic models based on internal variables related with strain or stress	10
Creep-recovery deformation of 304 stainless-steel springs under low forces	10
Kirigami beyond tension: Expanding Kirigami's versatility via shear actuation	10
Characterization of dynamic confinement response of potting materials at different strain rates and temperatures	10
A phenomenological constitutive model for predicting both the moderate and large deformation behavior of elastomeric materials	10
An infill-based approach towards stiffer auxetic lattices: Design and study of enhanced in-plane elastic properties	10
Modeling plasticity-mediated void growth at the single crystal scale: A physics-informed machine learning approach	10
Accelerated intelligent prediction and analysis of mechanical properties of magnesium alloys based on scaled super learner machine-learning algorithms	10
Computational homogenization of linear elastic properties in porous non-woven fibrous materials	10
Process-induced residual stress in non-crimp fabric composites: Experimental and numerical evaluation considering viscoelasticity	10
Experimental testing of V notched radially graded materials under static loading	10
Plane waves in nonlocal elastic–plastic materials containing voids	10
Deciphering grain-boundary composition-structure-mechanical property relationships via interfacial property diagrams	10